You are not logged in.

Pages: 1 2

Topic closed

#1 2019-03-09 13:59:26

erickwill
Member
Registered: 2013-11-05
Posts: 137

[WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Dear fellas,

After I fresh install, I was about to configure the "details" inside gnome-control-center. As soon I clicked on it, it got close immediately and from that point I could even open it.


========================================================================
WORKAROUND "FIX"

Doing this, you gonna reset things up..

robotchaos wrote:

Same issue here, Details caused it for me. Running the following helps:

$ dconf reset -f /org/gnome/control-center/

So..

$ dconf reset -f /org/gnome/control-center/

However, every time you click on "Details", things gonna mess up again..

So the best thing to do, for now, if you gonna use "Details" or correlated things is one of the following workarounds bellow:

****************************
Latest workaround:

Sangeppato wrote:

If anyone is interested, I've modified the PKGBUILD to match the latest commit on the 3.30 branch: https://send.firefox.com/download/f3716 … V_T5W3lTfA

****************************



apc103 wrote:

Had the same problem.  Downgrading package glib2-2.60.0-1 to glib2-2.58.3-1 fixes the problem.

loqs wrote:

Arch_Linux_Archive#/packages
Edit:
Please build and check 2.58.0 and 2.60.0 locally assuming the former is good and the later is bad then test bdc9328bdf5ebb7f52f947354e2b14fedde0035b.

BottleNeck wrote:
loqs wrote:

Arch_Linux_Archive#/packages
Edit:
Please build and check 2.58.0 and 2.60.0 locally assuming the former is good and the later is bad then test bdc9328bdf5ebb7f52f947354e2b14fedde0035b.

as a newbie, i can confirm this works. For reference command to downgrade:
pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

sidelined point, if you upgrade again with pacman -Syu (for example) this package will get updated again.


Until glib2 get the proper fix.

BTW, it's advised and smart to skip package glib2 from being upgraded until glib2 get fixed.

So edit:

$ sudo gedit /etc/pacman.conf

edit:

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
IgnorePkg   = glib2
#IgnoreGroup =

========================================================================


The verbose brought :

 
$ gnome-control-center --verbose

Segmentation fault (core dumped)

dmesg:

[  622.414723] gnome-control-c[3158]: segfault at fffffff8 ip 00007f6b81a71f41 sp 00007ffc22118210 error 4 in libc-2.28.so[7f6b81a0e000+14b000]

Also, FYI, into a HP Envy laptop, using bumblebee, nividia and xf86-intel-video.

Anyone has experienced this issue?

I was wondering if it didn't pop up due to some parameter inside "Details" is messed or missing.. otherwise, why does it alone would close? No other app has caused any issue so far.

Any fix to that?

Last edited by erickwill (2019-03-15 17:22:55)

Offline

#2 2019-03-09 19:22:17

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,196

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Look at/post the details of this core dump. I remember, though don't know if that has been fixed already, that some form of gnome-control-center had a crash issue when checking a certain setting and not having avahi-daemon started, so you might want to try that.

Offline

#3 2019-03-09 22:48:16

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

V1del wrote:

Look at/post the details of this core dump. I remember, though don't know if that has been fixed already, that some form of gnome-control-center had a crash issue when checking a certain setting and not having avahi-daemon started, so you might want to try that.

Thank you very much for the tip. I did try it, but unfortunately it didn't work.

I got the same results..

Verbose:

Segmentation fault (core dumped)

dmesg:

168.509049] gnome-control-c[2502]: segfault at fffffff8 ip 00007f26e34bef41 sp 00007ffeae04cd80 error 4 in libc-2.28.so[7f26e345b000+14b000]

A few more errors:

(gst-plugin-scanner:2684): GStreamer-WARNING **: 20:21:58.955: Failed to load plugin '/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so': libfluidsynth.so.2: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2684): GStreamer-WARNING **: 20:21:59.343: Failed to load plugin '/usr/lib/gstreamer-1.0/libgstkate.so': libkate.so.1: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2684): GStreamer-WARNING **: 20:21:59.352: Failed to load plugin '/usr/lib/gstreamer-1.0/libgstlv2.so': liblilv-0.so.0: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2684): GStreamer-WARNING **: 20:21:59.773: Failed to load plugin '/usr/lib/gstreamer-1.0/libgstzbar.so': libzbar.so.0: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2684): GStreamer-WARNING **: 20:21:59.990: Failed to load plugin '/usr/lib/gstreamer-1.0/libgstqmlgl.so': libQt5Quick.so.5: cannot open shared object file: No such file or directory
**
ERROR:../gnome-control-center/shell/cc-shell-model.c:458:cc_shell_model_set_panel_visibility: assertion failed: (valid)
Aborted

Any other advice is really appreciated.. since, I believe that, I tried almost everything I found googling.

Last edited by erickwill (2019-03-09 23:28:27)

Offline

#4 2019-03-10 00:29:54

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,196

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

I've posted a link containing instructions to properly analyze a core dump, without having a backtrace of the actual crash this will be hard to diagnose.

Offline

#5 2019-03-10 01:12:04

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

V1del wrote:

I've posted a link containing instructions to properly analyze a core dump, without having a backtrace of the actual crash this will be hard to diagnose.


Sorry, I forgot to paste it.


Here you go..


coredumpctl list:

$ coredumpctl list
TIME                            PID   UID   GID SIG COREFILE  EXE
Fri 2019-03-08 18:47:36 -03   11965  1000   985  11 present   /usr/bin/gnome-co>
Fri 2019-03-08 18:47:45 -03   12049  1000   985  11 present   /usr/bin/gnome-co>
TIME                            PID   UID   GID SIG COREFILE  EXE
Fri 2019-03-08 18:47:36 -03   11965  1000   985  11 present   /usr/bin/gnome-co>
Fri 2019-03-08 18:47:45 -03   12049  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 10:48:07 -03    3047  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 10:48:48 -03    3158  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 10:50:59 -03    3486  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 11:26:13 -03    2897  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 11:53:08 -03    4839  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 11:53:24 -03    4867  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 12:58:51 -03    3831  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 12:59:11 -03    3857  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:29:43 -03    3255  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:32:17 -03    1677  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:32:37 -03    1730  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:38:36 -03    3227  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:43:28 -03    2502  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 19:45:27 -03    2786  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 20:12:46 -03    2231  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 20:21:44 -03    2645  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 20:22:00 -03    2682     0     0   6 error     /usr/bin/gnome-co>
Sat 2019-03-09 21:08:50 -03    8181  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 21:13:28 -03   11318  1000   985  11 present   /usr/bin/gnome-co>
Sat 2019-03-09 21:17:04 -03    2853  1000   985  11 present   /usr/bin/gnome-co>
lines 1-23/26 88%...skipping...
TIME                            PID   UID   GID SIG COREFILE  EXE
Fri 2019-03-08 18:47:36 -03   11965  1000   985  11 present   /usr/bin/gnome-control-center
Fri 2019-03-08 18:47:45 -03   12049  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 10:48:07 -03    3047  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 10:48:48 -03    3158  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 10:50:59 -03    3486  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 11:26:13 -03    2897  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 11:53:08 -03    4839  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 11:53:24 -03    4867  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 12:58:51 -03    3831  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 12:59:11 -03    3857  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:29:43 -03    3255  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:32:17 -03    1677  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:32:37 -03    1730  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:38:36 -03    3227  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:43:28 -03    2502  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 19:45:27 -03    2786  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 20:12:46 -03    2231  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 20:21:44 -03    2645  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 20:22:00 -03    2682     0     0   6 error     /usr/bin/gnome-control-center
Sat 2019-03-09 21:08:50 -03    8181  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 21:13:28 -03   11318  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 21:17:04 -03    2853  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 21:45:31 -03    1519  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 21:52:12 -03    1578  1000   985  11 present   /usr/bin/gnome-control-center
Sat 2019-03-09 22:00:02 -03    3741  1000   985  11 present   /usr/bin/gnome-control-center
~


$coredumpctl info 2682

[erick@mobile Desktop]$ coredumpctl info 2682
           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-se>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d443>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-s>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d44>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.s>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal->
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-termina>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal->
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.>
lines 1-23



           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-s>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d44>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.s>
lines 1-23



           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-se>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d443>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so>
lines 1-23

           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-ser>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.>
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-serv>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23

           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-serve>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c9>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23

           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.s>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b6>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
lines 1-23


           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 41min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.>
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b>
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
                #4  0x000055ce5ca96d52 cc_shell_model_set_panel_visibility (gnome-co>
                #5  0x000055ce5cad37f7 n/a (gnome-control-center)
                #6  0x000055ce5cad38e1 cc_wifi_panel_static_init_func (gnome-control>
                #7  0x000055ce5cb99a23 cc_panel_loader_fill_model (gnome-control-cen>
                #8  0x000055ce5cb99bfe n/a (gnome-control-center)
                #9  0x00007fa137ac9753 n/a (libgobject-2.0.so.0)
                #10 0x00007fa137aca154 g_object_new_valist (libgobject-2.0.so.0)
                #11 0x00007fa137acaaea g_object_new (libgobject-2.0.so.0)
                #12 0x000055ce5cb962a0 cc_window_new (gnome-control-center)
                #13 0x000055ce5cb9a16c n/a (gnome-control-center)
                #14 0x00007fa137ac3e75 g_closure_invoke (libgobject-2.0.so.0)
                #15 0x00007fa137ab1188 n/a (libgobject-2.0.so.0)
                #16 0x00007fa137ab51ae g_signal_emit_valist (libgobject-2.0.so.0)
                #17 0x00007fa137ab6080 g_signal_emit (libgobject-2.0.so.0)
                #18 0x00007fa137b8e0b4 g_application_register (libgio-2.0.so.0)
                #19 0x00007fa137b8f1cc n/a (libgio-2.0.so.0)
                #20 0x00007fa137b8eebb g_application_run (libgio-2.0.so.0)
                #21 0x000055ce5ca91359 main (gnome-control-center)
                #22 0x00007fa137ccf223 __libc_start_main (libc.so.6)
                #23 0x000055ce5ca913ae _start (gnome-control-center)
                
                Stack trace of thread 2683:
                #0  0x00007fa137e7cafc pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so>
                #1  0x00007fa1268ddc94 n/a (i965_dri.so)
                #2  0x00007fa1268dd9b8 n/a (i965_dri.so)
                #3  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #4  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2689:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d96d2 g_main_loop_run (libglib-2.0.so.0)
                #3  0x00007fa137b4a568 n/a (libgio-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2685:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa1379d87d2 n/a (libglib-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2687:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa125289bde n/a (libdconfsettings.so)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
lines 55-77/77 (END)

$coredump gdb 2682

[erick@mobile Desktop]$ coredumpctl gdb 2682
           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 46min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.service
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b67dad70714449.2682.1552173720000000.lz4 (inaccessible)
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
                #4  0x000055ce5ca96d52 cc_shell_model_set_panel_visibility (gnome-control-center)
                #5  0x000055ce5cad37f7 n/a (gnome-control-center)
                #6  0x000055ce5cad38e1 cc_wifi_panel_static_init_func (gnome-control-center)
                #7  0x000055ce5cb99a23 cc_panel_loader_fill_model (gnome-control-center)
                #8  0x000055ce5cb99bfe n/a (gnome-control-center)
                #9  0x00007fa137ac9753 n/a (libgobject-2.0.so.0)
                #10 0x00007fa137aca154 g_object_new_valist (libgobject-2.0.so.0)
                #11 0x00007fa137acaaea g_object_new (libgobject-2.0.so.0)
                #12 0x000055ce5cb962a0 cc_window_new (gnome-control-center)
                #13 0x000055ce5cb9a16c n/a (gnome-control-center)
                #14 0x00007fa137ac3e75 g_closure_invoke (libgobject-2.0.so.0)
                #15 0x00007fa137ab1188 n/a (libgobject-2.0.so.0)
                #16 0x00007fa137ab51ae g_signal_emit_valist (libgobject-2.0.so.0)
                #17 0x00007fa137ab6080 g_signal_emit (libgobject-2.0.so.0)
                #18 0x00007fa137b8e0b4 g_application_register (libgio-2.0.so.0)
                #19 0x00007fa137b8f1cc n/a (libgio-2.0.so.0)
                #20 0x00007fa137b8eebb g_application_run (libgio-2.0.so.0)
                #21 0x000055ce5ca91359 main (gnome-control-center)
                #22 0x00007fa137ccf223 __libc_start_main (libc.so.6)
                #23 0x000055ce5ca913ae _start (gnome-control-center)
                
                Stack trace of thread 2683:
                #0  0x00007fa137e7cafc pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                #1  0x00007fa1268ddc94 n/a (i965_dri.so)
                #2  0x00007fa1268dd9b8 n/a (i965_dri.so)
                #3  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #4  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2689:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d96d2 g_main_loop_run (libglib-2.0.so.0)
                #3  0x00007fa137b4a568 n/a (libgio-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2685:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa1379d87d2 n/a (libglib-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2687:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa125289bde n/a (libdconfsettings.so)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)

File "/var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b67dad70714449.2682.1552173720000000.lz4" is not readable: Permission denied
[erick@mobile Desktop]$ 
[erick@mobile Desktop]$ coredumpctl gdb 2682
           PID: 2682 (gnome-control-c)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Sat 2019-03-09 20:22:00 -03 (1h 46min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/user@1000.service/gnome-terminal-server.service
          Unit: user@1000.service
     User Unit: gnome-terminal-server.service
         Slice: user-1000.slice
     Owner UID: 1000 (erick)
       Boot ID: b192e8fb03d4437c96b67dad70714449
    Machine ID: d5e4d34745634fe6800e4d6fb22e8ab3
      Hostname: mobile
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b67dad70714449.2682.1552173720000000.lz4 (inaccessible)
       Message: Process 2682 (gnome-control-c) of user 0 dumped core.
                
                Stack trace of thread 2682:
                #0  0x00007fa137ce2d7f raise (libc.so.6)
                #1  0x00007fa137ccd672 abort (libc.so.6)
                #2  0x00007fa137986042 n/a (libglib-2.0.so.0)
                #3  0x00007fa1379b3b9c g_assertion_message_expr (libglib-2.0.so.0)
                #4  0x000055ce5ca96d52 cc_shell_model_set_panel_visibility (gnome-control-center)
                #5  0x000055ce5cad37f7 n/a (gnome-control-center)
                #6  0x000055ce5cad38e1 cc_wifi_panel_static_init_func (gnome-control-center)
                #7  0x000055ce5cb99a23 cc_panel_loader_fill_model (gnome-control-center)
                #8  0x000055ce5cb99bfe n/a (gnome-control-center)
                #9  0x00007fa137ac9753 n/a (libgobject-2.0.so.0)
                #10 0x00007fa137aca154 g_object_new_valist (libgobject-2.0.so.0)
                #11 0x00007fa137acaaea g_object_new (libgobject-2.0.so.0)
                #12 0x000055ce5cb962a0 cc_window_new (gnome-control-center)
                #13 0x000055ce5cb9a16c n/a (gnome-control-center)
                #14 0x00007fa137ac3e75 g_closure_invoke (libgobject-2.0.so.0)
                #15 0x00007fa137ab1188 n/a (libgobject-2.0.so.0)
                #16 0x00007fa137ab51ae g_signal_emit_valist (libgobject-2.0.so.0)
                #17 0x00007fa137ab6080 g_signal_emit (libgobject-2.0.so.0)
                #18 0x00007fa137b8e0b4 g_application_register (libgio-2.0.so.0)
                #19 0x00007fa137b8f1cc n/a (libgio-2.0.so.0)
                #20 0x00007fa137b8eebb g_application_run (libgio-2.0.so.0)
                #21 0x000055ce5ca91359 main (gnome-control-center)
                #22 0x00007fa137ccf223 __libc_start_main (libc.so.6)
                #23 0x000055ce5ca913ae _start (gnome-control-center)
                
                Stack trace of thread 2683:
                #0  0x00007fa137e7cafc pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                #1  0x00007fa1268ddc94 n/a (i965_dri.so)
                #2  0x00007fa1268dd9b8 n/a (i965_dri.so)
                #3  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #4  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2689:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d96d2 g_main_loop_run (libglib-2.0.so.0)
                #3  0x00007fa137b4a568 n/a (libgio-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2685:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa1379d87d2 n/a (libglib-2.0.so.0)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)
                
                Stack trace of thread 2687:
                #0  0x00007fa137d9bc21 __poll (libc.so.6)
                #1  0x00007fa1379d8690 n/a (libglib-2.0.so.0)
                #2  0x00007fa1379d877e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fa125289bde n/a (libdconfsettings.so)
                #4  0x00007fa1379b3c21 n/a (libglib-2.0.so.0)
                #5  0x00007fa137e76a9d start_thread (libpthread.so.0)
                #6  0x00007fa137da6b23 __clone (libc.so.6)

File "/var/lib/systemd/coredump/core.gnome-control-c.0.b192e8fb03d4437c96b67dad70714449.2682.1552173720000000.lz4" is not readable: Permission denied

Offline

#6 2019-03-10 02:28:29

loqs
Member
Registered: 2014-03-06
Posts: 18,042

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Possibly https://gitlab.gnome.org/GNOME/gnome-co … issues/248

Offline

#7 2019-03-10 11:48:50

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

loqs wrote:

Thanks for the reply.
I fear that is not the case, since I'm using gnome-control-center inside Gnome environment itself.
Also, I tried to reinstall some libs that, according to the log, seems to be missing. However, it didn't work at all.
Running out of options here..
Anyone else have any clue on this issue?

Last edited by erickwill (2019-03-10 11:50:10)

Offline

#8 2019-03-10 12:00:35

loqs
Member
Registered: 2014-03-06
Posts: 18,042

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

If you create a new user does that user also experience the issue?

Offline

#9 2019-03-10 12:56:09

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

loqs wrote:

If you create a new user does that user also experience the issue?

I just created a new user and the issue had gone.. until I did a click on gnome-control-center/"Details".. from that point the issue started over again.

FYI. when I created the new user, I picked some logs and all clear.. no Segfault or whatever missed libs constant early..

Offline

#10 2019-03-10 16:43:05

Fabi0_Z
Member
Registered: 2019-02-05
Posts: 13

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

I've the same problem and an HP Laptop too

Offline

#11 2019-03-10 16:45:30

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Fabi0_Z wrote:

I've the same problem and an HP Laptop too

Which hp laptop do you have? Do you use bumblebee, alongside with nvidia and intel video? I wonder if is it a gpu related issue interacting with gstreamer or something else..

Last edited by erickwill (2019-03-10 16:46:44)

Offline

#12 2019-03-10 16:55:29

Fabi0_Z
Member
Registered: 2019-02-05
Posts: 13

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

erickwill wrote:
Fabi0_Z wrote:

I've the same problem and an HP Laptop too

Which hp laptop do you have? Do you use bumblebee, alongside with nvidia and intel video? I wonder if is it a gpu related issue interacting with gstreamer or something else..

HP 15-g224nl, no nvidia/intel GPU, I've an AMD A8 with integrated AMD graphics and a dedicated AMD graphics, and I've done the same arch installation with gnome on my desktop computer and run without issues, I suspect it's something directly related to HP hardware, maybe some motherboard detail or similar

Offline

#13 2019-03-10 17:07:01

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Fabi0_Z wrote:
erickwill wrote:
Fabi0_Z wrote:

I've the same problem and an HP Laptop too

Which hp laptop do you have? Do you use bumblebee, alongside with nvidia and intel video? I wonder if is it a gpu related issue interacting with gstreamer or something else..

HP 15-g224nl, no nvidia/intel GPU, I've an AMD A8 with integrated AMD graphics and a dedicated AMD graphics, and I've done the same arch installation with gnome on my desktop computer and run without issues, I suspect it's something directly related to HP hardware, maybe some motherboard detail or similar

It could be.. however, I don't see how this theory could fit without gpu relation instead.. since you are running on amd.. I think that is something else. I just wonder when did you proceed your arch installation?

Offline

#14 2019-03-10 17:08:21

Fabi0_Z
Member
Registered: 2019-02-05
Posts: 13

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

erickwill wrote:

It could be.. however, I don't see how this theory could fit without gpu relation instead.. since you are running on amd.. I think that is something else. I just wonder when did you proceed your arch installation?

4 hours ago

Offline

#15 2019-03-10 18:37:40

Sangeppato
Member
Registered: 2019-01-10
Posts: 21

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Same issue here, on a Acer Aspire E5

Offline

#16 2019-03-10 19:43:44

broad_side_of_a_barn
Member
Registered: 2019-03-10
Posts: 2

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Same issue here, fresh Arch install on an AMD desktop PC.

coredumpctl list

[jordanl@neckbread ~]$ coredumpctl list
TIME                            PID   UID   GID SIG COREFILE  EXE
Sun 2019-03-10 14:21:00 CDT    7280  1000  1000  11 present   /usr/bin/gnome-co>
Sun 2019-03-10 14:28:27 CDT    1227  1000  1000  11 present   /usr/bin/gnome-co>
Sun 2019-03-10 14:29:20 CDT    1321  1000  1000  11 present   /usr/bin/gnome-co>
Sun 2019-03-10 14:34:32 CDT    2002  1000  1000  11 present   /usr/bin/gnome-co>
Sun 2019-03-10 14:34:57 CDT    2023  1000  1000  11 present   /usr/bin/gnome-co>
Sun 2019-03-10 14:46:35 CDT    1223  1000  1000  11 present   /usr/bin/gnome-co>
lines 1-7/7 (END)

coredumpctl info 7280

           PID: 7280 (gnome-control-c)
           UID: 1000 (jordanl)
           GID: 1000 (jordanl)
        Signal: 11 (SEGV)
     Timestamp: Sun 2019-03-10 14:21:00 CDT (28min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/session-4.scope
          Unit: session-4.scope
         Slice: user-1000.slice
       Session: 4
     Owner UID: 1000 (jordanl)
       Boot ID: 6fde609c23e242c3a5d806b77a44b08a
    Machine ID: e97afad3f95f4e828b6b12730909b566
      Hostname: neckbread
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.1000.6fde609c23e>
       Message: Process 7280 (gnome-control-c) of user 1000 dumped core.
                
                Stack trace of thread 7280:
                #0  0x00007fb03d1a4f41 __libc_free (libc.so.6)
                #1  0x00007fb03d007d7a g_unix_mount_free (libgio-2.0.so.0)
                #2  0x000055acc8219f04 n/a (gnome-control-center)
                #3  0x000055acc821f79b n/a (gnome-control-center)

coredumpctl gdb 7280

           PID: 7280 (gnome-control-c)
           UID: 1000 (jordanl)
           GID: 1000 (jordanl)
        Signal: 11 (SEGV)
     Timestamp: Sun 2019-03-10 14:21:00 CDT (30min ago)
  Command Line: gnome-control-center
    Executable: /usr/bin/gnome-control-center
 Control Group: /user.slice/user-1000.slice/session-4.scope
          Unit: session-4.scope
         Slice: user-1000.slice
       Session: 4
     Owner UID: 1000 (jordanl)
       Boot ID: 6fde609c23e242c3a5d806b77a44b08a
    Machine ID: e97afad3f95f4e828b6b12730909b566
      Hostname: neckbread
       Storage: /var/lib/systemd/coredump/core.gnome-control-c.1000.6fde609c23e242c3a5d806b77a44b08a.7280.1552245660000000.lz4
       Message: Process 7280 (gnome-control-c) of user 1000 dumped core.
                
                Stack trace of thread 7280:
                #0  0x00007fb03d1a4f41 __libc_free (libc.so.6)
                #1  0x00007fb03d007d7a g_unix_mount_free (libgio-2.0.so.0)
                #2  0x000055acc8219f04 n/a (gnome-control-center)
                #3  0x000055acc821f79b n/a (gnome-control-center)
                #4  0x00007fb03cf1f722 g_type_create_instance (libgobject-2.0.so.0)
                #5  0x00007fb03cf3d509 n/a (libgobject-2.0.so.0)
                #6  0x00007fb03cf3e154 g_object_new_valist (libgobject-2.0.so.0)
                #7  0x00007fb03cf3eaea g_object_new (libgobject-2.0.so.0)
                #8  0x000055acc824f4b9 n/a (gnome-control-center)
                #9  0x00007fb03cf37067 g_cclosure_marshal_VOID__STRINGv (libgobject-2.0.so.0)
                #10 0x00007fb03cf293b5 g_signal_emit_valist (libgobject-2.0.so.0)
                #11 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #12 0x000055acc824d502 n/a (gnome-control-center)
                #13 0x00007fb03cf37d72 g_closure_invoke (libgobject-2.0.so.0)
                #14 0x00007fb03cf24fd5 n/a (libgobject-2.0.so.0)
                #15 0x00007fb03cf291ae g_signal_emit_valist (libgobject-2.0.so.0)
                #16 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #17 0x00007fb03cf28bca g_signal_emit_valist (libgobject-2.0.so.0)
                #18 0x00007fb03cf29d62 g_signal_emit_by_name (libgobject-2.0.so.0)
                #19 0x000055acc824ca2f cc_panel_list_activate (gnome-control-center)
                #20 0x000055acc824d333 cc_panel_list_set_view (gnome-control-center)
                #21 0x000055acc824d4cd n/a (gnome-control-center)
                #22 0x00007fb03cf37e75 g_closure_invoke (libgobject-2.0.so.0)
                #23 0x00007fb03cf24fd5 n/a (libgobject-2.0.so.0)
                #24 0x00007fb03cf291ae g_signal_emit_valist (libgobject-2.0.so.0)
                #25 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #26 0x00007fb03cf293b5 g_signal_emit_valist (libgobject-2.0.so.0)
                #27 0x00007fb03cf29d62 g_signal_emit_by_name (libgobject-2.0.so.0)
                #28 0x000055acc824be81 n/a (gnome-control-center)
                #29 0x00007fb03cf37e75 g_closure_invoke (libgobject-2.0.so.0)
                #30 0x00007fb03cf24fd5 n/a (libgobject-2.0.so.0)
                #31 0x00007fb03cf291ae g_signal_emit_valist (libgobject-2.0.so.0)
                #32 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #33 0x00007fb03c917dd2 n/a (libgtk-3.so.0)
                #34 0x00007fb03a2fa6d0 ffi_call_unix64 (libffi.so.6)
                #35 0x00007fb03a2fa0a0 ffi_call (libffi.so.6)
                #36 0x00007fb03cf42cd8 g_cclosure_marshal_generic_va (libgobject-2.0.so.0)
                #37 0x00007fb03cf293b5 g_signal_emit_valist (libgobject-2.0.so.0)
                #38 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #39 0x00007fb03c8d52ed n/a (libgtk-3.so.0)
                #40 0x00007fb03cf428e2 g_cclosure_marshal_VOID__BOXEDv (libgobject-2.0.so.0)
                #41 0x00007fb03cf293b5 g_signal_emit_valist (libgobject-2.0.so.0)
                #42 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #43 0x00007fb03c8d23b3 n/a (libgtk-3.so.0)
                #44 0x00007fb03c8d3a23 n/a (libgtk-3.so.0)
                #45 0x00007fb03c8d6937 n/a (libgtk-3.so.0)
                #46 0x00007fb03c89d814 gtk_event_controller_handle_event (libgtk-3.so.0)
                #47 0x00007fb03ca63b04 n/a (libgtk-3.so.0)
                #48 0x00007fb03caba555 n/a (libgtk-3.so.0)
                #49 0x00007fb03cf293b5 g_signal_emit_valist (libgobject-2.0.so.0)
                #50 0x00007fb03cf2a080 g_signal_emit (libgobject-2.0.so.0)
                #51 0x00007fb03ca65e65 n/a (libgtk-3.so.0)
                #52 0x00007fb03c91d70b n/a (libgtk-3.so.0)
                #53 0x00007fb03c91f91c gtk_main_do_event (libgtk-3.so.0)
                #54 0x00007fb03c619ae6 n/a (libgdk-3.so.0)
                #55 0x00007fb03c676f75 n/a (libgdk-3.so.0)
                #56 0x00007fb03ce4a7bf g_main_context_dispatch (libglib-2.0.so.0)
                #57 0x00007fb03ce4c739 n/a (libglib-2.0.so.0)
                #58 0x00007fb03ce4c77e g_main_context_iteration (libglib-2.0.so.0)
                #59 0x00007fb03d002f5e g_application_run (libgio-2.0.so.0)
                #60 0x000055acc8149359 main (gnome-control-center)
                #61 0x00007fb03d143223 __libc_start_main (libc.so.6)
                #62 0x000055acc81493ae _start (gnome-control-center)
                
                Stack trace of thread 7285:
                #0  0x00007fb03d20fc21 __poll (libc.so.6)
                #1  0x00007fb03ce4c690 n/a (libglib-2.0.so.0)
                #2  0x00007fb03ce4d6d2 g_main_loop_run (libglib-2.0.so.0)
                #3  0x00007fb03cfbe568 n/a (libgio-2.0.so.0)
                #4  0x00007fb03ce27c21 n/a (libglib-2.0.so.0)
                #5  0x00007fb03d2eaa9d start_thread (libpthread.so.0)
                #6  0x00007fb03d21ab23 __clone (libc.so.6)
                
                Stack trace of thread 7287:
                #0  0x00007fb03d2154ed syscall (libc.so.6)
                #1  0x00007fb03cdfb141 g_cond_wait_until (libglib-2.0.so.0)
                #2  0x00007fb03ce7c2e3 n/a (libglib-2.0.so.0)
                #3  0x00007fb03ce7c4e3 g_async_queue_timeout_pop (libglib-2.0.so.0)
                #4  0x00007fb03ce20d6a n/a (libglib-2.0.so.0)
                #5  0x00007fb03ce27c21 n/a (libglib-2.0.so.0)
                #6  0x00007fb03d2eaa9d start_thread (libpthread.so.0)
                #7  0x00007fb03d21ab23 __clone (libc.so.6)
                
                Stack trace of thread 7282:
                #0  0x00007fb03d20fc21 __poll (libc.so.6)
                #1  0x00007fb03ce4c690 n/a (libglib-2.0.so.0)
                #2  0x00007fb03ce4c77e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fb03ce4c7d2 n/a (libglib-2.0.so.0)
                #4  0x00007fb03ce27c21 n/a (libglib-2.0.so.0)
                #5  0x00007fb03d2eaa9d start_thread (libpthread.so.0)
                #6  0x00007fb03d21ab23 __clone (libc.so.6)
                
                Stack trace of thread 7286:
                #0  0x00007fb03d2f0afc pthread_cond_wait@@GLIBC_2.3.2 (libpthread.so.0)
                #1  0x00007fb025eb6ab4 n/a (nouveau_dri.so)
                #2  0x00007fb025eb67d8 n/a (nouveau_dri.so)
                #3  0x00007fb03d2eaa9d start_thread (libpthread.so.0)
                #4  0x00007fb03d21ab23 __clone (libc.so.6)
                
                Stack trace of thread 7284:
                #0  0x00007fb03d20fc21 __poll (libc.so.6)
                #1  0x00007fb03ce4c690 n/a (libglib-2.0.so.0)
                #2  0x00007fb03ce4c77e g_main_context_iteration (libglib-2.0.so.0)
                #3  0x00007fb03d31ebde n/a (libdconfsettings.so)
                #4  0x00007fb03ce27c21 n/a (libglib-2.0.so.0)
                #5  0x00007fb03d2eaa9d start_thread (libpthread.so.0)
                #6  0x00007fb03d21ab23 __clone (libc.so.6)

GNU gdb (GDB) 8.2.1
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.

For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/bin/gnome-control-center...(no debugging symbols found)...done.

warning: core file may not match specified executable file.
[New LWP 7280]
[New LWP 7285]
[New LWP 7287]
[New LWP 7282]
[New LWP 7286]
[New LWP 7284]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Core was generated by `gnome-control-center'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0  0x00007fb03d1a4f41 in free () from /usr/lib/libc.so.6
[Current thread is 1 (Thread 0x7fb02cddcc00 (LWP 7280))]
(gdb)

Last edited by broad_side_of_a_barn (2019-03-10 19:52:39)

Offline

#17 2019-03-10 20:36:41

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Do you guys realized when this issue was triggered?
In my case, it just starts when I click on "Details", otherwise I can access the gnome-control-center without any problem.

Offline

#18 2019-03-10 21:07:18

broad_side_of_a_barn
Member
Registered: 2019-03-10
Posts: 2

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

erickwill wrote:

Do you guys realized when this issue was triggered?
In my case, it just starts when I click on "Details", otherwise I can access the gnome-control-center without any problem.

For me it's 100% of the time. Clicking on it in the overview, right-clicking on the desktop, or running from the console.

I had org/gnome/control-center/last-panel set to info-overview. Clearing that value in dconf DID in fact
allow me to go to other pages, but clicking "Details" crashed my system again like it did for erickwill.

I additionally seem to have an "WARNING: App 'org.gnome.Shell.desktop' exited with code 1" leading into "Unrecoverable failure in required component org.gnome.Shell.desktop" shell crash in journalctl, although I'm typing this logged in to GNOME right now.

Last edited by broad_side_of_a_barn (2019-03-10 21:24:12)

Offline

#19 2019-03-10 21:13:18

reV_sh
Member
Registered: 2019-03-10
Posts: 1

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

erickwill wrote:

Do you guys realized when this issue was triggered?
In my case, it just starts when I click on "Details", otherwise I can access the gnome-control-center without any problem.

Same issue here (gnome, lenovo, intel).
Each time I select "Details" the crash occurs.
I need to reset "org.gnome.ControlCenter last-panel" in dconf to be able to use the gnome-control-center again (as long it is set to "info-overview" it will crash again).

I started a fresh install two days ago, so a lot is going on, and I cant recall when it stopped working.

Last edited by reV_sh (2019-03-10 21:20:50)

Offline

#20 2019-03-10 21:24:35

pavlosdec
Member
Registered: 2019-03-10
Posts: 19

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Same problem for me. Intel i5, nvidia GTX460, asus motherboard.
Updating the system yesterday (9th of March) started the issue.
I used Timeshift and restored to 7th of March and there was no problem then...
Just wait for fresh update??

Offline

#21 2019-03-10 21:42:23

privatewindow
Member
Registered: 2019-03-10
Posts: 1

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Same issue here. Using a Lenovo Thinkpad T470, Intel HD 620. It happened after clicking the 'Details' tab.

Offline

#22 2019-03-11 00:19:45

erickwill
Member
Registered: 2013-11-05
Posts: 137

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

The Gnome 3.32 RC2 gonna be released next Wednesday.. hopefully, it gonna bring us the proper fix for this issue..

Last edited by erickwill (2019-03-11 00:21:05)

Offline

#23 2019-03-11 00:39:11

olivierguillon
Member
Registered: 2019-03-11
Posts: 6

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Same problem here. Clicking on the 'Details' tab crashes gnome-control-center. Was working yesterday, before the last updates (glib, xorg-xprop,...)

Offline

#24 2019-03-11 05:26:19

apc103
Member
Registered: 2019-03-11
Posts: 1

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

Had the same problem.  Downgrading package glib2-2.60.0-1 to glib2-2.58.3-1 fixes the problem.

Offline

#25 2019-03-11 09:44:06

Sangeppato
Member
Registered: 2019-01-10
Posts: 21

Re: [WORKAROUND] Gnome-control-center - Segmentation fault (core dumped)

I've opened a bug report: https://bugs.archlinux.org/task/61974?p … ring=glib2

Offline

Pages: 1 2

Topic closed

Board footer

Powered by FluxBB