You are not logged in.

Pages: 1

#1 2019-07-02 22:44:29

pwittchen
Member
From: Poland
Registered: 2019-07-02
Posts: 25
Website

[SOLVED] I cannot install Pixeluvo (qt4 package not found)

Hi,

I recently switched from Ubuntu to Arch and I'd like to use Pixeluvo app fro image editing (http://www.pixeluvo.com/). I used it on Ubuntu without any problems.
I tried to install it on Arch as follows:

git clone https://aur.archlinux.org/pixeluvo.git
cd pixeluvo
makepkg -si

and I saw the following error:

==> Making package: pixeluvo 1.6.0_2-1 (Wed 03 Jul 2019 12:59:10 AM CEST)
==> Checking runtime dependencies...
==> Installing missing dependencies...
error: target not found: qt4
==> ERROR: 'pacman' failed to install missing dependencies.

It says that qt4 package couldn't be found. I tried to install it, but with no luck. On Aur I can find qt in version 5 only. I tried to find any solution on the web, but none of them helped.
I really would like to keep using Arch and Pixeluvo at the same time.

I appreciate any help.

Regards,
Piotr

Last edited by pwittchen (2019-07-03 00:03:55)

Offline

#2 2019-07-02 22:49:40

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

Please post error messages in English: https://wiki.archlinux.org/index.php/Co … s_and_code


qt4 is also an AUR package; you'll need to build/install that first...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2019-07-02 22:50:57

Zod
Member
From: Hoosiertucky
Registered: 2019-03-10
Posts: 636

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

You said that you tried to install QT, what was it that you tried to install?

Edit0: Asking for version and package name.

Last edited by Zod (2019-07-02 22:54:09)

Offline

#4 2019-07-02 22:55:29

pwittchen
Member
From: Poland
Registered: 2019-07-02
Posts: 25
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

@Zod

I tried to install it as follows:

sudo pacman -S qt

and it installed correctly.

I also tried

sudo pacman -S qt4

but I've got the response that package was not found.

PS. I changed messages to English

Last edited by pwittchen (2019-07-02 23:00:43)

Offline

#5 2019-07-02 23:02:08

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

The package is not found because pacman only searches the official repositories, not the AUR: https://wiki.archlinux.org/index.php/Aur

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#6 2019-07-02 23:06:58

Zod
Member
From: Hoosiertucky
Registered: 2019-03-10
Posts: 636

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

Interestingly enough, when I type...

sudo pacman -S qt

I get...

 Repository extra
   1) pyside2  2) qt5-3d  3) qt5-base  4) qt5-charts  5) qt5-connectivity
   6) qt5-datavis3d  7) qt5-declarative  8) qt5-doc  9) qt5-examples
   10) qt5-gamepad  11) qt5-graphicaleffects  12) qt5-imageformats
   13) qt5-location  14) qt5-lottie  15) qt5-multimedia  16) qt5-networkauth
   17) qt5-purchasing  18) qt5-quickcontrols  19) qt5-quickcontrols2
   20) qt5-remoteobjects  21) qt5-script  22) qt5-scxml  23) qt5-sensors
   24) qt5-serialbus  25) qt5-serialport  26) qt5-speech  27) qt5-svg
   28) qt5-tools  29) qt5-translations  30) qt5-virtualkeyboard
   31) qt5-wayland  32) qt5-webchannel  33) qt5-webengine  34) qt5-webglplugin
   35) qt5-websockets  36) qt5-webview  37) qt5-x11extras  38) qt5-xmlpatterns

Offline

#7 2019-07-02 23:11:02

pwittchen
Member
From: Poland
Registered: 2019-07-02
Posts: 25
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

I installed all of this qt5 stuff (selection: default=all), but Pixeluvo relies on qt4 and this dependency is not resolved. I try to clone this git repo with qt4 (https://aur.archlinux.org/packages/qt4/) tomorrow and install it again, but as far as I remember I already tried this and got the build error. I tried different things, so I'm not completely sure. I'll check it tomorrow.

Last edited by pwittchen (2019-07-02 23:11:54)

Offline

#8 2019-07-02 23:14:50

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

pwittchen wrote:

I installed all of this qt5 stuff (selection: default=all), but Pixeluvo relies on qt4 and this dependency is not resolved.

Because, for the third time, it is an AUR package...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#9 2019-07-02 23:30:28

Zod
Member
From: Hoosiertucky
Registered: 2019-03-10
Posts: 636

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

In the meantime might you have to uninstall QT5 and its unneeded dependencies before going for QT4?

When you start this tomorrow, please bring exact input/output with you.

Edit0:Clarification

Last edited by Zod (2019-07-02 23:33:14)

Offline

#10 2019-07-03 00:02:30

pwittchen
Member
From: Poland
Registered: 2019-07-02
Posts: 25
Website

Re: [SOLVED] I cannot install Pixeluvo (qt4 package not found)

I didn't wait until tomorrow because this issue was bothering me.

I removed qt5 package

sudo pacman -Rdd qt

Then, installed qt4

git clone https://aur.archlinux.org/packages/qt4/
cd qt4
makepkg -si

This took a looong time and I kept getting many errors or warnings from C++ code in the output. It doesn't make sense to paste them here because I got dozens of these errors or maybe more.

Then, I got the following output

==> Tidying install...                                                                                                                                                                                               
  -> Removing libtool files...                                                                                                                                                                                       
  -> Purging unwanted files...                                                                                                                                                                                       
  -> Removing static library files...                                                                                                                                                                                
  -> Stripping unneeded symbols from binaries and libraries...                                                                                                                                                       
  -> Compressing man and info pages...                                                                                                                                                                               
==> Checking for packaging issues...                                                                                                                                                                                 
==> WARNING: Package contains reference to $srcdir                                                                                                                                                                   
usr/lib/qt4/bin/qmake                                                                                                                                                                                                
==> Creating package "qt4"...                                                                                                                                                                                        
  -> Generating .PKGINFO file...                                                                                                                                                                                     
  -> Generating .BUILDINFO file...                                                                                                                                                                                   
  -> Generating .MTREE file...                                                                                                                                                                                       
  -> Compressing package...                                                                                                                                                                                          
==> Leaving fakeroot environment.
==> Finished making: qt4 4.8.7-30 (Wed 03 Jul 2019 01:56:05 AM CEST)
==> Installing package qt4 with pacman -U...
loading packages...
resolving dependencies...
looking for conflicting packages...

Packages (1) qt4-4.8.7-30

Total Installed Size:  82.16 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                                                  [##############################################################################] 100%
(1/1) checking package integrity                                                                                                [##############################################################################] 100%
(1/1) loading package files                                                                                                     [##############################################################################] 100$
(1/1) checking for file conflicts                                                                                               [##############################################################################] 100%

loading packages...
resolving dependencies...
looking for conflicting packages...

Packages (1) qt4-4.8.7-30

Total Installed Size:  82.16 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                                                  [##############################################################################] 100%
(1/1) checking package integrity                                                                                                [##############################################################################] 100%
(1/1) loading package files                                                                                                     [##############################################################################] 100%
(1/1) checking for file conflicts                                                                                               [##############################################################################] 100%
(1/1) checking available disk space                                                                                             [##############################################################################] 100%
:: Processing package changes...
(1/1) installing qt4                                                                                                            [##############################################################################] 100%
Optional dependencies for qt4
    postgresql-libs: PostgreSQL driver [installed]
    mariadb-libs: MariaDB driver [installed]
    unixodbc: ODBC driver [installed]
    libfbclient: Firebird/iBase driver [installed]
    libxinerama: Xinerama support [installed]
    libxcursor: Xcursor support [installed]
    libxfixes: Xfixes support [installed]
    icu: Unicode support [installed]
    sni-qt: StatusNotifierItem (AppIndicators) support
:: Running post-transaction hooks...
(1/3) Updating icon theme caches...
(2/3) Arming ConditionNeedsUpdate...
(3/3) Updating the desktop file MIME type cache...

Then, I tried to install Pixeluvo:

git clone https://aur.archlinux.org/pixeluvo.git
cd pixeluvo
makepkg -si

Got the following output:

==> Making package: pixeluvo 1.6.0_2-1 (Wed 03 Jul 2019 01:59:09 AM CEST)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
  -> Found dummyfile
  -> Downloading pixeluvo-1.6.0-2.x86_64.rpm...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 21.7M  100 21.7M    0     0  1100k      0  0:00:20  0:00:20 --:--:-- 2253k
==> Validating source files with sha256sums...
    dummyfile ... Passed
==> Validating source_x86_64 files with sha256sums...
    pixeluvo-1.6.0-2.x86_64.rpm ... Passed
==> Extracting sources...
  -> Extracting pixeluvo-1.6.0-2.x86_64.rpm with bsdtar
==> Starting prepare()...
==> Entering fakeroot environment...
==> Starting package()...
==> Tidying install...
  -> Removing libtool files...
  -> Purging unwanted files...
  -> Removing static library files...
  -> Stripping unneeded symbols from binaries and libraries...
  -> Compressing man and info pages...
==> Checking for packaging issues...
==> Creating package "pixeluvo"...
  -> Generating .PKGINFO file...
  -> Generating .BUILDINFO file...
  -> Adding install file...
  -> Generating .MTREE file...
  -> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: pixeluvo 1.6.0_2-1 (Wed 03 Jul 2019 01:59:34 AM CEST)
==> Installing package pixeluvo with pacman -U...
loading packages...
resolving dependencies...
looking for conflicting packages...

Packages (1) pixeluvo-1.6.0_2-1

Total Installed Size:  14.52 MiB

:: Proceed with installation? [Y/n] 
(1/1) checking keys in keyring                                                                                                  [##############################################################################] 100%
(1/1) checking package integrity                                                                                                [##############################################################################] 100%
(1/1) loading package files                                                                                                     [##############################################################################] 100%
(1/1) checking for file conflicts                                                                                               [##############################################################################] 100%
(1/1) checking available disk space                                                                                             [##############################################################################] 100%
:: Processing package changes...
(1/1) installing pixeluvo                                                                                                       [##############################################################################] 100%
Please read and agree to the EULA at
less /usr/share/pixeluvo/PixeluvoEULA.txt
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the desktop file MIME type cache...

and it worked! :-D

Next, I could start Pixeluvo.

Thanks for your patience and help. I'm new to Arch, so I could have dummy issues. ;-)

Regards,
Piotr

Last edited by pwittchen (2019-07-03 00:03:15)

Offline

Pages: 1

Board footer

Powered by FluxBB