You are not logged in.

#1 2019-12-03 12:39:24

Thorsten Reinbold
Member
From: Germany
Registered: 2011-12-06
Posts: 333

No Sound after replacing Audigy 2 ZS > Audigy RX

Hi there!

Got a problem that I can't solve myself. Today, I replaced my old Audigy 2 ZS (PCI) with a newer Audigy RX 7.1 (PCIe). I was hoping that wouldn't cause any problems, but I was wrong. Now I have no sound at all.

What I did so far: Deleted any configuration that has anything to do with sound in my home folder (alsa,pulseaudio,etc) to reset possible personal settings. That didn't do anything. Also, I've checked if the channels are muted via alsamixer, but I still had no luck. Everything I see seems to be fine (alsamixer, pavucontrol). If I play a soundfile, pavucontrol shows the output with it's small volumebar, so sound is obviously playing. But I still don't hear anything. Onboard-Sound is disabled via Bios.

I've also tested the sound output running a PartedMagic-Live-Session, sound is working without problems there, so it's not the hardware or the wrong output connector.


I'm a little confused right now.


lspci | grep "audio"
07:00.0 Multimedia audio controller: Creative Labs CA0108/CA10300 [Sound Blaster Audigy Series]
lsmod |grep "snd"
snd_emu10k1           188416  2
snd_util_mem           16384  1 snd_emu10k1
snd_ac97_codec        151552  1 snd_emu10k1
snd_hwdep              16384  1 snd_emu10k1
snd_rawmidi            45056  1 snd_emu10k1
snd_seq_device         16384  2 snd_emu10k1,snd_rawmidi
ac97_bus               16384  1 snd_ac97_codec
snd_pcm               135168  2 snd_emu10k1,snd_ac97_codec
snd_timer              40960  2 snd_emu10k1,snd_pcm
snd                   106496  11 snd_seq_device,snd_hwdep,snd_emu10k1,snd_timer,snd_ac97_codec,snd_pcm,snd_rawmidi
soundcore              16384  1 snd
pacmd list-sources
1 source(s) available.
  * index: 0
	name: <alsa_output.pci-0000_07_00.0.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
	monitor_of: 0
	card: 0 <alsa_card.pci-0000_07_00.0>
	module: 6
	properties:
		device.description = "Monitor of CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "SB Audigy 5/Rx [SB1550]"
		alsa.long_card_name = "SB Audigy 5/Rx [SB1550] (rev.0, serial:0x10241102) at 0xc000, irq 16"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:07:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:06:00.0/0000:07:00.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0008"
		device.product.name = "CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx)"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
dmesg |grep snd
[    4.965242] snd_emu10k1 0000:07:00.0: Audigy2 value: Special config.

Last edited by Thorsten Reinbold (2019-12-05 12:11:34)

Offline

#2 2019-12-03 16:24:41

d_fajardo
Member
Registered: 2017-07-28
Posts: 518

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

See if you can get sound from ALSA alone first. Disable pulseaudio and run speaker-test -c 2. What is the output?
Also what is the output of aplay -L | grep :CARD?

Offline

#3 2019-12-03 22:12:29

Thorsten Reinbold
Member
From: Germany
Registered: 2011-12-06
Posts: 333

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

Thanks for your answer. Unfortunately, it has just become obsolete. I just came home after work and suddenly everything is working. I spent hours in the afternoon trying to track down the problem. Without success. Now suddenly, without any explanation, it works. I'm a little annoyed right now.  I would like to know why it didn't work this afternoon. Nevertheless: Thank you.

Offline

#4 2019-12-04 07:31:52

d_fajardo
Member
Registered: 2017-07-28
Posts: 518

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

It could be that the sound index of the card changed and the index could change on reboot. I assume you have 2 cards (your MB builtin and Audigy) and the default can be indexed differently on reboot. cat /proc/asound/modules gives you the order.
If you experience the same problem again, you can have a look at the indexing.

Offline

#5 2019-12-05 12:16:56

Thorsten Reinbold
Member
From: Germany
Registered: 2011-12-06
Posts: 333

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

Ok, NOT solved. The hole "sound-situation" seems to be unstable at all.

I just heard a podcast, then started Audacity to check an audio file for errors, and suddenly the sound is completely gone again. No matter what I set how and where, everything remains silent. By the way: I have only one sound card listed with 'cat /proc/asound/modules'. As I wrote above, the Intel-HDA is disabled and the modules are blacklisted.

Offline

#6 2019-12-05 12:20:23

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,003

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

Post during this not working situation

sudo fuser -v /dev/snd/*
aplay -lL
amixer -c0
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

FWIW if you open up audacity and don't have pulseaudio-alsa installed and don't set audacity to play back to the "default" device then that is quite normal. You cannot use an audio card while it's being blocked by something other than through what's creating the block (pulseaudio should, if installed, ideally be the only thing accessing the hardware)

Last edited by V1del (2019-12-05 12:21:17)

Offline

#7 2019-12-05 12:56:22

Thorsten Reinbold
Member
From: Germany
Registered: 2011-12-06
Posts: 333

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

pulseaudio-alsa is installed.

sudo fuser -v /dev/snd/*
[sudo] Passwort für nordlicht: 
                     BEN.        PID ZUGR.  BEFEHL
/dev/snd/controlC0:  gdm         577 F.... pulseaudio
                     nordlicht    874 F.... pulseaudio
aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Audigy2
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    Default Audio Device
front:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    Front speakers
rear:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    Rear speakers
center_lfe:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    Center and Subwoofer speakers
side:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    Side speakers
surround21:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Audigy2,DEV=0
    SB Audigy 5/Rx [SB1550], ADC Capture/Standard PCM Playback
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Audigy2
    SB Audigy 5/Rx [SB1550]
    USB Stream Output
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Audigy2 [SB Audigy 5/Rx [SB1550]], Gerät 0: emu10k1 [ADC Capture/Standard PCM Playback]
  Sub-Geräte: 32/32
  Sub-Gerät #0: subdevice #0
  Sub-Gerät #1: subdevice #1
  Sub-Gerät #2: subdevice #2
  Sub-Gerät #3: subdevice #3
  Sub-Gerät #4: subdevice #4
  Sub-Gerät #5: subdevice #5
  Sub-Gerät #6: subdevice #6
  Sub-Gerät #7: subdevice #7
  Sub-Gerät #8: subdevice #8
  Sub-Gerät #9: subdevice #9
  Sub-Gerät #10: subdevice #10
  Sub-Gerät #11: subdevice #11
  Sub-Gerät #12: subdevice #12
  Sub-Gerät #13: subdevice #13
  Sub-Gerät #14: subdevice #14
  Sub-Gerät #15: subdevice #15
  Sub-Gerät #16: subdevice #16
  Sub-Gerät #17: subdevice #17
  Sub-Gerät #18: subdevice #18
  Sub-Gerät #19: subdevice #19
  Sub-Gerät #20: subdevice #20
  Sub-Gerät #21: subdevice #21
  Sub-Gerät #22: subdevice #22
  Sub-Gerät #23: subdevice #23
  Sub-Gerät #24: subdevice #24
  Sub-Gerät #25: subdevice #25
  Sub-Gerät #26: subdevice #26
  Sub-Gerät #27: subdevice #27
  Sub-Gerät #28: subdevice #28
  Sub-Gerät #29: subdevice #29
  Sub-Gerät #30: subdevice #30
  Sub-Gerät #31: subdevice #31
Karte 0: Audigy2 [SB Audigy 5/Rx [SB1550]], Gerät 2: emu10k1 efx [Multichannel Capture/PT Playback]
  Sub-Geräte: 8/8
  Sub-Gerät #0: subdevice #0
  Sub-Gerät #1: subdevice #1
  Sub-Gerät #2: subdevice #2
  Sub-Gerät #3: subdevice #3
  Sub-Gerät #4: subdevice #4
  Sub-Gerät #5: subdevice #5
  Sub-Gerät #6: subdevice #6
  Sub-Gerät #7: subdevice #7
Karte 0: Audigy2 [SB Audigy 5/Rx [SB1550]], Gerät 3: emu10k1 [Multichannel Playback]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
amixer -c0
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined cvolume cswitch cswitch-joined
  Playback channels: Mono
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 31
  Mono: Playback 2147483647 [100%] [0.00dB]
  Front Left: Capture 31 [100%] [0.00dB] [on]
  Front Right: Capture 31 [100%] [0.00dB] [on]
Simple mixer control 'Tone',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Bass',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 40
  Front Left: 20 [50%]
  Front Right: 20 [50%]
Simple mixer control 'Treble',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 40
  Front Left: 20 [50%]
  Front Right: 20 [50%]
Simple mixer control 'PCM',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 2147483647
  Front Left: Capture 0 [0%] [-99999.99dB]
  Front Right: Capture 0 [0%] [-99999.99dB]
Simple mixer control 'PCM Center',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 2147483647
  Mono: Playback 1375402624 [64%] [-3.87dB]
Simple mixer control 'PCM Front',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 1354970579 [63%] [-4.00dB]
  Front Right: Playback 1354970579 [63%] [-4.00dB]
Simple mixer control 'PCM LFE',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 2147483647
  Mono: Playback 1354970579 [63%] [-4.00dB]
Simple mixer control 'PCM Out Path & Mute',0
  Capabilities: enum
  Items: 'pre 3D' 'post 3D'
  Item0: 'pre 3D'
Simple mixer control 'PCM Side',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 1354970579 [63%] [-4.00dB]
  Front Right: Playback 1354970579 [63%] [-4.00dB]
Simple mixer control 'PCM Surround',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 1354970579 [63%] [-4.00dB]
  Front Right: Playback 1354970579 [63%] [-4.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 2147483647 [100%] [0.00dB]
  Front Right: Playback 2147483647 [100%] [0.00dB]
Simple mixer control 'Surround',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 2147483647 [100%] [0.00dB]
  Front Right: Playback 2147483647 [100%] [0.00dB]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 2147483647
  Mono: Playback 2147483647 [100%] [0.00dB]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined
  Playback channels: Mono
  Limits: Playback 0 - 2147483647
  Mono: Playback 2147483647 [100%] [0.00dB]
Simple mixer control 'Side',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 2147483647 [100%] [0.00dB]
  Front Right: Playback 2147483647 [100%] [0.00dB]
Simple mixer control 'Synth',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 2147483647
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'Wave',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 1372239338 [64%] [-3.89dB]
  Front Right: Playback 1372239338 [64%] [-3.89dB]
Simple mixer control 'Line',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'CD',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 31
  Mono: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost (+20dB)',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Mic Extra Boost',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Mic Select',0
  Capabilities: enum
  Items: 'Mic1' 'Mic2'
  Item0: 'Mic1'
Simple mixer control 'Video',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'Phone',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 31
  Mono: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'Phone Output',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 31
  Mono: Playback 2 [6%] [-43.50dB] [off]
Simple mixer control 'IEC958 Optical',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 2147483647
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'IEC958 Optical Raw',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Beep',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 15
  Mono: Capture 0 [0%] [-45.00dB] [off]
Simple mixer control 'Aux',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'Aux2',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 2147483647
  Front Left: Playback 1367507968 [64%] [-3.91dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 1367507968 [64%] [-3.91dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'Mono Output Select',0
  Capabilities: enum
  Items: 'Mix' 'Mic'
  Item0: 'Mic'
Simple mixer control 'AMic',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647
  Mono:
  Front Left: Playback 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB]
Simple mixer control 'Analog Mix',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 2147483647
  Front Left: Playback 1367507968 [64%] [-3.91dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 1367507968 [64%] [-3.91dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'Audigy Analog/Digital Output Jack',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Audigy CD',0
  Capabilities: pvolume cvolume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: Playback 0 - 2147483647 Capture 0 - 2147483647
  Front Left: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
  Front Right: Playback 0 [0%] [-99999.99dB] Capture 0 [0%] [-99999.99dB]
Simple mixer control 'External Amplifier',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
pacmd list-cards
1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_07_00.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "SB Audigy 5/Rx [SB1550]"
		alsa.long_card_name = "SB Audigy 5/Rx [SB1550] (rev.0, serial:0x10241102) at 0xc000, irq 16"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:07:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:06:00.0/0000:07:00.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0008"
		device.product.name = "CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx)"
		device.string = "0"
		device.description = "CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo-Eingabe (priority 65, available: unknown)
		input:iec958-stereo: Digital Stereo (IEC958)-Eingabe (priority 55, available: unknown)
		output:analog-stereo: Analog Stereo-Ausgabe (priority 6500, available: unknown)
		output:analog-surround-21: Analog Surround 2.1-Ausgabe (priority 1300, available: unknown)
		output:analog-surround-40: Analog Surround 4.0-Ausgabe (priority 1200, available: unknown)
		output:analog-surround-41: Analog Surround 4.1-Ausgabe (priority 1300, available: unknown)
		output:analog-surround-50: Analog Surround 5.0-Ausgabe (priority 1200, available: unknown)
		output:analog-surround-51: Analog Surround 5.1-Ausgabe (priority 1300, available: unknown)
		output:analog-surround-71: Analog Surround 7.1-Ausgabe (priority 1200, available: unknown)
		output:iec958-stereo: Digital Stereo (IEC958)-Ausgabe (priority 5500, available: unknown)
		off: Aus (priority 0, available: unknown)
	active profile: <output:analog-stereo>
	sinks:
		alsa_output.pci-0000_07_00.0.analog-stereo/#0: CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Analog Stereo
	sources:
		alsa_output.pci-0000_07_00.0.analog-stereo.monitor/#0: Monitor of CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Analog Stereo
	ports:
		analog-input-mic;input-microphone-1: Mikrofon / Mikrofon 1 (priority 8720, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic;input-microphone-2: Mikrofon / Mikrofon 2 (priority 8719, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line-Eingang (priority 8100, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-aux: Analoger Eingang (priority 8000, latency offset 0 usec, available: unknown)
			properties:
				
		analog-input-video: Video (priority 7000, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-input: Digitaleingang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output;output-amplifier-on: Analoge Ausgabe / Verstärker (priority 9910, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output;output-amplifier-off: Analoge Ausgabe / Kein Verstärker (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
		iec958-stereo-output: Digitalausgang (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
pacmd list-sinks
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_07_00.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9039
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
	card: 0 <alsa_card.pci-0000_07_00.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ADC Capture/Standard PCM Playback"
		alsa.id = "emu10k1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "SB Audigy 5/Rx [SB1550]"
		alsa.long_card_name = "SB Audigy 5/Rx [SB1550] (rev.0, serial:0x10241102) at 0xc000, irq 16"
		alsa.driver_name = "snd_emu10k1"
		device.bus_path = "pci-0000:07:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1c.4/0000:06:00.0/0000:07:00.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0008"
		device.product.name = "CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx)"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "65536"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Analog Stereo"
		alsa.mixer_name = "SigmaTel STAC9750,51"
		alsa.components = "AC97a:83847650"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output;output-amplifier-on: Analoge Ausgabe / Verstärker (priority 9910, latency offset 0 usec, available: unknown)
			properties:
				
		analog-output;output-amplifier-off: Analoge Ausgabe / Kein Verstärker (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output;output-amplifier-on>
    index: 1
	name: <combined>
	driver: <module-combine-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 37 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 200,00 ms
	module: 13
	properties:
		device.class = "filter"
		device.description = "Simultaneous output to CA0108/CA10300 [Sound Blaster Audigy Series] (SB1550 Audigy 5/Rx) Analog Stereo"
		device.icon_name = "audio-card"
pacmd list-sink-inputs
0 sink input(s) available.

Edit: Tried again after restoring Audacitys default settings (the "default" device is used). Same result.

Last edited by Thorsten Reinbold (2019-12-05 13:04:37)

Offline

#8 2019-12-05 13:14:48

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,003

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

Mhm anything in dmesg and/or

journalctl --user-unit=pulseaudio

? FWIW there seem to be some known issues/regressions with this particular chipset, though I'm unsure towards the general progress, see for example https://bbs.archlinux.org/viewtopic.php?id=246758 maybe giving the LTS kernel a shot could help here.

Offline

#9 2019-12-05 13:28:09

Thorsten Reinbold
Member
From: Germany
Registered: 2011-12-06
Posts: 333

Re: No Sound after replacing Audigy 2 ZS > Audigy RX

The journalctl-output looks fine. Nothing wrong here. I found out that I can reenable the sound within the gnome sound settings (switching to 'Analog Outoput / No Amplifier' and back to 'Analog Output / Amplifier'). Audacity is also starting normally for now, but I don't have a "stable feeling" here. I'll see how that works out over the next few days. In case of doubt I dare a complete new installation. I wanted to switch from Bios to UEFI anyway and a new SSD is coming the next days. So it would be a good opportunity.

Offline

Board footer

Powered by FluxBB