You are not logged in.

Pages: 1

#1 2020-01-19 19:49:33

SClause
Member
Registered: 2019-04-12
Posts: 4

wpa_supplicant 2.8 and higher cannot connect to WiFi

Since wpa_supplicant version 2.8 my PC is not connecting to my WiFi anymore. If I install version 2.6 or lower it is working.
In the logs you can find that there is just one big difference. In 2.6 after sending the association request there is a CMD_ASSOCIATE reply immediately. In 2.8 after sending the request there is a CMD_DEL_STATION event before the CMD_ASSOCIATE event.

How can I solve this issue without forcing Arch to use the old 2.6 version?

Thanks.
BR
SClause

Log from 2.6:

wpa_supplicant v2.6
Successfully initialized wpa_supplicant
Initializing interface 'wlp3s0' conf '/tmp/wpa.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/tmp/wpa.conf' -> '/tmp/wpa.conf'
Reading configuration file '/tmp/wpa.conf'
Priority group 0
   id=0 ssid='WifiName'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: interface wlp3s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x5573ea592a60
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0409506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=7f506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0505
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0500
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp3s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp3s0: Own MAC address: 92:48:b0:5a:4a:36
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp3s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp3s0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlp3s0: WPS: UUID based on MAC address: d4b474c6-2ae9-5977-a682-bdfa391d7017
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp3s0: Added interface wlp3s0
wlp3s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x5573ea592a60
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x5573ea592a60 after 0.000016 second wait
wlp3s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (47) received
wlp3s0: Own scan request started a scan in 0.000043 seconds
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 3.170242 seconds
nl80211: Received scan results (1 BSSes)
wlp3s0: BSS: Start scan result update 1
wlp3s0: BSS: Add new id 0 BSSID de:ad:be:ef:12:34 SSID 'WifiName' freq 2442
BSS: last_scan_res_used=1/32
wlp3s0: New scan results available (own=1 ext=0)
WPS: AP de:ad:be:ef:12:34 type 0 added
WPS: AP[0] de:ad:be:ef:12:34 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlp3s0: Radio work 'scan'@0x5573ea592a60 done in 3.172760 seconds
wlp3s0: radio_work_free('scan'@0x5573ea592a60: num_active_works --> 0
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: de:ad:be:ef:12:34 ssid='WifiName' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-55 freq=2442  wps
wlp3s0:    selected based on RSN IE
wlp3s0:    selected BSS de:ad:be:ef:12:34 ssid='WifiName'
wlp3s0: Considering connect request: reassociate: 0  selected: de:ad:be:ef:12:34  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x5573ea569700  current_ssid=(nil)
wlp3s0: Request association with de:ad:be:ef:12:34
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlp3s0: Add radio work 'sme-connect'@0x5573ea592a60
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'sme-connect'@0x5573ea592a60 after 0.000028 second wait
wlp3s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID de:ad:be:ef:12:34
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
wlp3s0: WPA: Selected mgmt group cipher 32
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
wlp3s0: WPA: using GTK TKIP
wlp3s0: WPA: using PTK CCMP
wlp3s0: WPA: using KEY_MGMT WPA-PSK
wlp3s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x10
RRM: No RRM in network
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with de:ad:be:ef:12:34 (SSID='WifiName' freq=2442 MHz)
wlp3s0: State: SCANNING -> AUTHENTICATING
Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
wlp3s0: Determining shared radio frequencies (max len 1)
wlp3s0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=3)
  * bssid=de:ad:be:ef:12:34
  * freq=2442
  * SSID - hexdump_ascii(len=8):
     57 69 66 69 4e 61 6d 65                        WifiName       
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station de:ad:be:ef:12:34
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
nl80211: Authenticate event
wlp3s0: Event AUTH (11) received
wlp3s0: SME: Authentication response: peer=de:ad:be:ef:12:34 auth_type=0 auth_transaction=2 status_code=0
wlp3s0: set_disable_max_amsdu: -1
wlp3s0: set_ampdu_factor: -1
wlp3s0: set_ampdu_density: -1
wlp3s0: set_disable_ht40: 0
wlp3s0: set_disable_sgi: 0
wlp3s0: set_disable_ldpc: 0
wlp3s0: Trying to associate with de:ad:be:ef:12:34 (SSID='WifiName' freq=2442 MHz)
wlp3s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=3)
  * bssid=de:ad:be:ef:12:34
  * freq=2442
  * SSID - hexdump_ascii(len=8):
     57 69 66 69 4e 61 6d 65                        WifiName       
  * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 01 00 00 40
  * WPA Versions 0x2
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Association request send successfully
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp3s0
nl80211: Associate event
wlp3s0: Event ASSOC (0) received
wlp3s0: Association info event
resp_ies - hexdump(len=146): 01 08 82 84 8b 0c 12 96 18 24 32 04 30 48 60 6c 2d 1a ad 01 1b ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 04 06 e6 a7 0c 00 3d 16 07 08 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a 0e 14 00 0a 00 2c 01 c8 00 14 00 05 00 19 00 7f 08 05 00 00 02 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20
wlp3s0: freq=2442 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
wlp3s0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp3s0: Associated to a new BSS: BSSID=de:ad:be:ef:12:34
wlp3s0: Associated with de:ad:be:ef:12:34
wlp3s0: WPA: Association event - clear replay counter
wlp3s0: WPA: Clear old PTK
TDLS: Remove peers on association
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE

Log from 2.8:

wpa_supplicant v2.8
Successfully initialized wpa_supplicant
Initializing interface 'wlp3s0' conf '/tmp/wpa.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/tmp/wpa.conf' -> '/tmp/wpa.conf'
Reading configuration file '/tmp/wpa.conf'
Priority group 0
   id=0 ssid='WifiName'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: interface wlp3s0 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x5573ea592a60
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0104
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=040d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=090d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0409506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=7f506f9a09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0a1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0505
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5573ea592a60 match=0500
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp3s0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5500[NO_IR][RADAR] 5520[NO_IR][RADAR] 5540[NO_IR][RADAR]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR]
wlp3s0: Own MAC address: 92:48:b0:5a:4a:36
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp3s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp3s0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlp3s0: WPS: UUID based on MAC address: d4b474c6-2ae9-5977-a682-bdfa391d7017
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp3s0: Added interface wlp3s0
wlp3s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID
wlp3s0: Add radio work 'scan'@0x5573ea592a60
wlp3s0: First radio work item in the queue - schedule start immediately
wlp3s0: Starting radio work 'scan'@0x5573ea592a60 after 0.000016 second wait
wlp3s0: nl80211: scan request
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
wlp3s0: nl80211: Scan trigger
wlp3s0: Event SCAN_STARTED (46) received
wlp3s0: Own scan request started a scan in 0.000043 seconds
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=3 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
wlp3s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825
wlp3s0: Event SCAN_RESULTS (3) received
wlp3s0: Scan completed in 3.170242 seconds
nl80211: Received scan results (1 BSSes)
wlp3s0: BSS: Start scan result update 1
wlp3s0: BSS: Add new id 0 BSSID de:ad:be:ef:12:34 SSID 'WifiName' freq 2442
BSS: last_scan_res_used=1/32
wlp3s0: New scan results available (own=1 ext=0)
WPS: AP de:ad:be:ef:12:34 type 0 added
WPS: AP[0] de:ad:be:ef:12:34 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlp3s0: Radio work 'scan'@0x5573ea592a60 done in 3.172760 seconds
wlp3s0: radio_work_free('scan'@0x5573ea592a60): num_active_works --> 0
wlp3s0: Selecting BSS from priority group 0
wlp3s0: 0: de:ad:be:ef:12:34 ssid='WifiName' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-55 freq=2442  wps
wlp3s0:    selected based on RSN IE
wlp3s0:    selected BSS de:ad:be:ef:12:34 ssid='WifiName'
wlp3s0: Considering connect request: reassociate: 0  selected: de:ad:be:ef:12:34  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x5573ea569700  current_ssid=(nil)
wlp3s0: Request association with de:ad:be:ef:12:34
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlp3s0: No ongoing scan/p2p-scan found to abort
wlp3s0: Add radio work 'sme-connect'@0x5573ea592a60
wlp3s0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlp3s0: Starting radio work 'sme-connect'@0x5573ea592a60 after 0.000028 second wait
wlp3s0: WPA: clearing own WPA/RSN IE
wlp3s0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID de:ad:be:ef:12:34
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
wlp3s0: WPA: Selected mgmt group cipher 32
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
wlp3s0: WPA: AP group 0x8 network profile group 0x18; available group 0x8
wlp3s0: WPA: using GTK TKIP
wlp3s0: WPA: AP pairwise 0x18 network profile pairwise 0x18; available pairwise 0x18
wlp3s0: WPA: using PTK CCMP
wlp3s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x3; available key_mgmt 0x2
wlp3s0: WPA: using KEY_MGMT WPA-PSK
wlp3s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlp3s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x10
RRM: No RRM in network
Added supported operating classes IE - hexdump(len=19): 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with de:ad:be:ef:12:34 (SSID='WifiName' freq=2442 MHz)
EAPOL: External notification - portValid=0
wlp3s0: State: SCANNING -> AUTHENTICATING
Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
wlp3s0: Determining shared radio frequencies (max len 1)
wlp3s0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=3)
  * bssid=de:ad:be:ef:12:34
  * freq=2442
  * SSID=WifiName
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
nl80211: New station de:ad:be:ef:12:34
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
nl80211: Authenticate event
wlp3s0: Event AUTH (10) received
wlp3s0: SME: Authentication response: peer=de:ad:be:ef:12:34 auth_type=0 auth_transaction=2 status_code=0
SME: Association Request IEs - hexdump(len=51): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 01 00 00 40 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
wlp3s0: Trying to associate with de:ad:be:ef:12:34 (SSID='WifiName' freq=2442 MHz)
wlp3s0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=3)
  * bssid=de:ad:be:ef:12:34
  * freq=2442
  * SSID=WifiName
  * IEs - hexdump(len=51): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 01 00 00 40 3b 11 51 51 53 54 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
  * WPA Versions 0x2
  * pairwise=0xfac04
  * group=0xfac02
  * akm=0xfac02
  * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
  * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00
nl80211: Association request send successfully
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
nl80211: Delete station de:ad:be:ef:12:34
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp3s0
nl80211: MLME event 38; timeout with de:ad:be:ef:12:34
wlp3s0: Event ASSOC_TIMED_OUT (14) received
wlp3s0: SME: Association timed out
wlp3s0: Radio work 'sme-connect'@0x5573ea592a60 done in 0.352887 seconds
wlp3s0: radio_work_free('sme-connect'@0x5573ea592a60): num_active_works --> 0
Added BSSID de:ad:be:ef:12:34 into blacklist
wlp3s0: Blacklist count 1 --> request scan in 100 ms
wlp3s0: Setting scan request: 0.100000 sec
nl80211: Data frame filter flags=0x0
wlp3s0: State: ASSOCIATING -> DISCONNECTED
nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlp3s0: State: DISCONNECTED -> SCANNING
wlp3s0: Starting AP scan for wildcard SSID

PS: I replaced the MAC address for security issues.

Last edited by SClause (2020-01-20 05:57:40)

Offline

#2 2020-01-19 19:54:35

2ManyDogs
Forum Fellow
Registered: 2012-01-15
Posts: 4,645

Re: wpa_supplicant 2.8 and higher cannot connect to WiFi

Please edit your post and use [ code ] tags (not quote tags) when posting output.

https://wiki.archlinux.org/index.php/Co … s_and_code
https://bbs.archlinux.org/help.php#bbcode

Offline

#3 2020-01-20 05:58:33

SClause
Member
Registered: 2019-04-12
Posts: 4

Re: wpa_supplicant 2.8 and higher cannot connect to WiFi

@2ManyDogs: changed wink

Last edited by SClause (2020-01-20 05:58:53)

Offline

Pages: 1

Board footer

Powered by FluxBB