You are not logged in.

Pages: 1 2

#26 2020-01-20 23:05:16

Zod
Member
From: Hoosiertucky
Registered: 2019-03-10
Posts: 636

Re: Light dm cant create session

$ sudo rm /etc/X11/xorg.conf.bak
$ sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak

Offline

#27 2020-01-20 23:25:32

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

thank you, I did that now however its still failing with the same error I think: 

[+0.00s] DEBUG: Logging to /home/jarod/.cache/lightdm/log/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=1000 PID=579
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Running in user mode
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ?gio-vfs?
[+0.01s] DEBUG: Monitoring logind for seats
[+0.01s] DEBUG: New seat added from logind: seat0
[+0.01s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.01s] DEBUG: Seat seat0: Starting
[+0.01s] DEBUG: Seat seat0: Creating greeter session
[+0.01s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
[+0.01s] DEBUG: Loading user config from /etc/lightdm/users.conf
[+0.01s] DEBUG: User jarod added
[+0.01s] DEBUG: Seat seat0: Creating display server of type x
[+0.01s] DEBUG: posix_spawn avoided (fd close requested) 
[+0.01s] DEBUG: Could not run plymouth --ping: Failed to execute child process ?plymouth? (No such file or directory)
[+0.01s] DEBUG: Seat seat0: Starting local X display
[+0.01s] DEBUG: XServer 0: Logging to /home/jarod/.cache/lightdm/log/x-0.log
[+0.01s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+0.01s] WARNING: Error reading existing Xauthority: Failed to open file ?/run/lightdm/root/:0?: Permission denied
[+0.01s] WARNING: XServer 0: Failed to write authority: Failed to open X authority /run/lightdm/root/:0: Permission denied
[+0.01s] DEBUG: XServer 0: Launching X Server
[+0.01s] DEBUG: Launching process 586: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp
[+0.01s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.01s] WARNING: Could not enumerate user data directory /var/lib/lightdm-data: Error opening directory '/var/lib/lightdm-data': Permission denied
[+0.01s] DEBUG: Process 586 exited with return value 1
[+0.01s] DEBUG: XServer 0: X server stopped
[+0.01s] DEBUG: XServer 0: Removing X server authority /run/lightdm/root/:0
[+0.01s] DEBUG: Seat seat0: Display server stopped
[+0.01s] DEBUG: Seat seat0: Stopping session
[+0.01s] DEBUG: Seat seat0: Session stopped
[+0.01s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+0.01s] DEBUG: Seat seat0: Stopping; greeter display server failed to start
[+0.01s] DEBUG: Seat seat0: Stopping
[+0.01s] DEBUG: Seat seat0: Stopped
[+0.01s] DEBUG: Required seat has stopped
[+0.01s] DEBUG: Stopping display manager
[+0.01s] DEBUG: Display manager stopped
[+0.01s] DEBUG: Stopping daemon
[+0.01s] DEBUG: Exiting with return value 1

Offline

#28 2020-01-20 23:41:33

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

If you restart lightdm.service now is the issue still present?  If so what is the contents of Xorg.0.log now?

Offline

#29 2020-01-20 23:49:12

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

Im not sure how to restart something, however the Xorg.0.log is definitely different from before:

[    11.193] 
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[    11.193] Build Operating System: Linux Arch Linux
[    11.193] Current Operating System: Linux vm 5.4.13-arch1-1 #1 SMP PREEMPT Fri, 17 Jan 2020 23:09:54 +0000 x86_64
[    11.194] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30a6afc2-cb8e-4674-97a6-1eeca844eb56 rw loglevel=3 quiet
[    11.194] Build Date: 14 January 2020  07:13:52AM
[    11.194]  
[    11.194] Current version of pixman: 0.38.4
[    11.194] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.194] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.194] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 20 23:43:29 2020
[    11.306] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.328] (==) No Layout section.  Using the first Screen section.
[    11.328] (==) No screen section available. Using defaults.
[    11.328] (**) |-->Screen "Default Screen Section" (0)
[    11.328] (**) |   |-->Monitor "<default monitor>"
[    11.339] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    11.339] (==) Automatically adding devices
[    11.339] (==) Automatically enabling devices
[    11.339] (==) Automatically adding GPU devices
[    11.340] (==) Automatically binding GPU devices
[    11.340] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.397] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[    11.397] 	Entry deleted from font path.
[    11.397] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[    11.397] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    11.397] 	Entry deleted from font path.
[    11.397] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    11.397] 	Entry deleted from font path.
[    11.397] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    11.397] 	Entry deleted from font path.
[    11.401] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    11.401] (==) ModulePath set to "/usr/lib/xorg/modules"
[    11.401] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.401] (II) Module ABI versions:
[    11.401] 	X.Org ANSI C Emulation: 0.4
[    11.401] 	X.Org Video Driver: 24.1
[    11.401] 	X.Org XInput driver : 24.1
[    11.401] 	X.Org Server Extension : 10.0
[    11.404] (++) using VT number 7

[    11.404] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.407] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.419] (--) PCI:*(0@0:2:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xf0000000/134217728, 0xf8000000/2097152, I/O @ 0x0000d010/16, BIOS @ 0x????????/131072
[    11.419] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.419] (II) LoadModule: "glx"
[    11.423] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.548] (II) Module glx: vendor="X.Org Foundation"
[    11.549] 	compiled for 1.20.7, module version = 1.0.0
[    11.549] 	ABI class: X.Org Server Extension, version 10.0
[    11.549] (==) Matched vmware as autoconfigured driver 0
[    11.549] (==) Matched modesetting as autoconfigured driver 1
[    11.549] (==) Matched fbdev as autoconfigured driver 2
[    11.549] (==) Matched vesa as autoconfigured driver 3
[    11.549] (==) Assigned the driver to the xf86ConfigLayout
[    11.549] (II) LoadModule: "vmware"
[    11.549] (WW) Warning, couldn't open module vmware
[    11.549] (EE) Failed to load module "vmware" (module does not exist, 0)
[    11.549] (II) LoadModule: "modesetting"
[    11.549] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    11.581] (II) Module modesetting: vendor="X.Org Foundation"
[    11.581] 	compiled for 1.20.7, module version = 1.20.7
[    11.581] 	Module class: X.Org Video Driver
[    11.581] 	ABI class: X.Org Video Driver, version 24.1
[    11.581] (II) LoadModule: "fbdev"
[    11.582] (WW) Warning, couldn't open module fbdev
[    11.582] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    11.582] (II) LoadModule: "vesa"
[    11.582] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    11.594] (II) Module vesa: vendor="X.Org Foundation"
[    11.594] 	compiled for 1.20.0, module version = 2.4.0
[    11.594] 	Module class: X.Org Video Driver
[    11.594] 	ABI class: X.Org Video Driver, version 24.0
[    11.594] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    11.594] (II) VESA: driver for VESA chipsets: vesa
[    11.598] (II) modeset(0): using drv /dev/dri/card0
[    11.598] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    11.598] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    11.598] (==) modeset(0): RGB weight 888
[    11.599] (==) modeset(0): Default visual is TrueColor
[    11.599] (II) Loading sub module "glamoregl"
[    11.599] (II) LoadModule: "glamoregl"
[    11.599] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    11.681] (II) Module glamoregl: vendor="X.Org Foundation"
[    11.681] 	compiled for 1.20.7, module version = 1.0.1
[    11.681] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.714] (II) modeset(0): glamor X acceleration enabled on SVGA3D; build: RELEASE;  LLVM;
[    13.714] (II) modeset(0): glamor initialized
[    13.715] (II) modeset(0): Output Virtual-1 has no monitor section
[    13.715] (II) modeset(0): Output Virtual-2 has no monitor section
[    13.715] (II) modeset(0): Output Virtual-3 has no monitor section
[    13.715] (II) modeset(0): Output Virtual-4 has no monitor section
[    13.715] (II) modeset(0): Output Virtual-5 has no monitor section
[    13.716] (II) modeset(0): Output Virtual-6 has no monitor section
[    13.716] (II) modeset(0): Output Virtual-7 has no monitor section
[    13.716] (II) modeset(0): Output Virtual-8 has no monitor section
[    13.724] (II) modeset(0): EDID for output Virtual-1
[    13.724] (II) modeset(0): Printing probed modes for output Virtual-1
[    13.724] (II) modeset(0): Modeline "preferred"x60.0   42.75  800 850 900 950  600 650 700 750 -hsync +vsync (45.0 kHz eP)
[    13.724] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[    13.724] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[    13.724] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[    13.724] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[    13.724] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[    13.724] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    13.724] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    13.724] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    13.725] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.725] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    13.725] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    13.725] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    13.725] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    13.725] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.725] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    13.725] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.725] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.725] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    13.725] (II) modeset(0): EDID for output Virtual-2
[    13.725] (II) modeset(0): EDID for output Virtual-3
[    13.725] (II) modeset(0): EDID for output Virtual-4
[    13.725] (II) modeset(0): EDID for output Virtual-5
[    13.725] (II) modeset(0): EDID for output Virtual-6
[    13.725] (II) modeset(0): EDID for output Virtual-7
[    13.725] (II) modeset(0): EDID for output Virtual-8
[    13.725] (II) modeset(0): Output Virtual-1 connected
[    13.725] (II) modeset(0): Output Virtual-2 disconnected
[    13.725] (II) modeset(0): Output Virtual-3 disconnected
[    13.725] (II) modeset(0): Output Virtual-4 disconnected
[    13.725] (II) modeset(0): Output Virtual-5 disconnected
[    13.725] (II) modeset(0): Output Virtual-6 disconnected
[    13.726] (II) modeset(0): Output Virtual-7 disconnected
[    13.726] (II) modeset(0): Output Virtual-8 disconnected
[    13.726] (II) modeset(0): Using exact sizes for initial modes
[    13.726] (II) modeset(0): Output Virtual-1 using initial mode preferred +0+0
[    13.726] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.726] (==) modeset(0): DPI set to (96, 96)
[    13.726] (II) Loading sub module "fb"
[    13.726] (II) LoadModule: "fb"
[    13.726] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.751] (II) Module fb: vendor="X.Org Foundation"
[    13.751] 	compiled for 1.20.7, module version = 1.0.0
[    13.751] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.751] (II) UnloadModule: "vesa"
[    13.751] (II) Unloading vesa
[    13.905] (==) modeset(0): Backing store enabled
[    13.905] (==) modeset(0): Silken mouse disabled
[    13.906] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    13.906] (==) modeset(0): DPMS enabled
[    13.906] (II) modeset(0): [DRI2] Setup complete
[    13.906] (II) modeset(0): [DRI2]   DRI driver: vmwgfx
[    13.906] (II) modeset(0): [DRI2]   VDPAU driver: vmwgfx
[    13.906] (II) Initializing extension Generic Event Extension
[    13.906] (II) Initializing extension SHAPE
[    13.907] (II) Initializing extension MIT-SHM
[    13.907] (II) Initializing extension XInputExtension
[    13.907] (II) Initializing extension XTEST
[    13.907] (II) Initializing extension BIG-REQUESTS
[    13.907] (II) Initializing extension SYNC
[    13.907] (II) Initializing extension XKEYBOARD
[    13.908] (II) Initializing extension XC-MISC
[    13.908] (II) Initializing extension SECURITY
[    13.908] (II) Initializing extension XFIXES
[    13.908] (II) Initializing extension RENDER
[    13.908] (II) Initializing extension RANDR
[    13.909] (II) Initializing extension COMPOSITE
[    13.909] (II) Initializing extension DAMAGE
[    13.909] (II) Initializing extension MIT-SCREEN-SAVER
[    13.909] (II) Initializing extension DOUBLE-BUFFER
[    13.909] (II) Initializing extension RECORD
[    13.909] (II) Initializing extension DPMS
[    13.910] (II) Initializing extension Present
[    13.910] (II) Initializing extension DRI3
[    13.910] (II) Initializing extension X-Resource
[    13.910] (II) Initializing extension XVideo
[    13.910] (II) Initializing extension XVideo-MotionCompensation
[    13.910] (II) Initializing extension GLX
[    13.914] (II) AIGLX: Loaded and initialized vmwgfx
[    13.914] (II) GLX: Initialized DRI2 GL provider for screen 0
[    13.914] (II) Initializing extension XFree86-VidModeExtension
[    13.914] (II) Initializing extension XFree86-DGA
[    13.914] (II) Initializing extension XFree86-DRI
[    13.914] (II) Initializing extension DRI2
[    13.915] (II) modeset(0): Damage tracking initialized
[    13.915] (II) modeset(0): Setting screen physical size to 211 x 158
[    14.236] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    14.236] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    14.236] (II) LoadModule: "libinput"
[    14.236] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.271] (II) Module libinput: vendor="X.Org Foundation"
[    14.271] 	compiled for 1.20.5, module version = 0.29.0
[    14.271] 	Module class: X.Org XInput Driver
[    14.271] 	ABI class: X.Org XInput driver, version 24.1
[    14.271] (II) Using input driver 'libinput' for 'Power Button'
[    14.271] (**) Power Button: always reports core events
[    14.271] (**) Option "Device" "/dev/input/event0"
[    14.271] (**) Option "_source" "server/udev"
[    14.349] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    14.349] (II) event0  - Power Button: device is a keyboard
[    14.350] (II) event0  - Power Button: device removed
[    14.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[    14.405] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    14.409] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    14.409] (II) event0  - Power Button: device is a keyboard
[    14.411] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    14.411] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    14.411] (II) Using input driver 'libinput' for 'Sleep Button'
[    14.411] (**) Sleep Button: always reports core events
[    14.412] (**) Option "Device" "/dev/input/event1"
[    14.412] (**) Option "_source" "server/udev"
[    14.415] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    14.415] (II) event1  - Sleep Button: device is a keyboard
[    14.415] (II) event1  - Sleep Button: device removed
[    14.473] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[    14.473] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    14.477] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    14.477] (II) event1  - Sleep Button: device is a keyboard
[    14.479] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    14.479] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    14.479] (II) Using input driver 'libinput' for 'Video Bus'
[    14.479] (**) Video Bus: always reports core events
[    14.479] (**) Option "Device" "/dev/input/event2"
[    14.479] (**) Option "_source" "server/udev"
[    14.483] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    14.483] (II) event2  - Video Bus: device is a keyboard
[    14.484] (II) event2  - Video Bus: device removed
[    14.671] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[    14.671] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    14.675] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[    14.676] (II) event2  - Video Bus: device is a keyboard
[    14.680] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event6)
[    14.680] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[    14.680] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[    14.680] (**) VirtualBox mouse integration: always reports core events
[    14.680] (**) Option "Device" "/dev/input/event6"
[    14.680] (**) Option "_source" "server/udev"
[    14.684] (II) event6  - VirtualBox mouse integration: is tagged by udev as: Mouse
[    14.685] (II) event6  - VirtualBox mouse integration: device is a pointer
[    14.685] (II) event6  - VirtualBox mouse integration: device removed
[    14.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input7/event6"
[    14.789] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[    14.790] (**) Option "AccelerationScheme" "none"
[    14.790] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[    14.790] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    14.790] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    14.794] (II) event6  - VirtualBox mouse integration: is tagged by udev as: Mouse
[    14.795] (II) event6  - VirtualBox mouse integration: device is a pointer
[    14.797] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[    14.797] (II) No input driver specified, ignoring this device.
[    14.797] (II) This device may have been added with another device file.
[    14.798] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[    14.798] (II) No input driver specified, ignoring this device.
[    14.798] (II) This device may have been added with another device file.
[    14.801] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[    14.801] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[    14.802] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[    14.802] (**) VirtualBox USB Tablet: always reports core events
[    14.802] (**) Option "Device" "/dev/input/event4"
[    14.802] (**) Option "_source" "server/udev"
[    14.865] (II) event4  - VirtualBox USB Tablet: is tagged by udev as: Mouse
[    14.867] (II) event4  - VirtualBox USB Tablet: device is a pointer
[    14.867] (II) event4  - VirtualBox USB Tablet: device removed
[    14.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input5/event4"
[    14.991] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[    14.991] (**) Option "AccelerationScheme" "none"
[    14.991] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[    14.991] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    14.991] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    15.070] (II) event4  - VirtualBox USB Tablet: is tagged by udev as: Mouse
[    15.072] (II) event4  - VirtualBox USB Tablet: device is a pointer
[    15.075] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[    15.075] (II) No input driver specified, ignoring this device.
[    15.075] (II) This device may have been added with another device file.
[    15.077] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[    15.077] (II) No input driver specified, ignoring this device.
[    15.077] (II) This device may have been added with another device file.
[    15.079] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    15.079] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    15.079] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    15.079] (**) AT Translated Set 2 keyboard: always reports core events
[    15.079] (**) Option "Device" "/dev/input/event3"
[    15.079] (**) Option "_source" "server/udev"
[    15.092] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.092] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    15.093] (II) event3  - AT Translated Set 2 keyboard: device removed
[    15.483] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    15.483] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    15.488] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.488] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    15.492] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[    15.492] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[    15.492] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[    15.492] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    15.493] (**) Option "Device" "/dev/input/event7"
[    15.493] (**) Option "_source" "server/udev"
[    15.496] (II) event7  - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[    15.497] (II) event7  - ImExPS/2 Generic Explorer Mouse: device is a pointer
[    15.498] (II) event7  - ImExPS/2 Generic Explorer Mouse: device removed
[    15.737] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    15.737] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[    15.738] (**) Option "AccelerationScheme" "none"
[    15.738] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[    15.738] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    15.738] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    15.743] (II) event7  - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[    15.743] (II) event7  - ImExPS/2 Generic Explorer Mouse: device is a pointer
[    15.746] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[    15.746] (II) No input driver specified, ignoring this device.
[    15.746] (II) This device may have been added with another device file.
[    15.748] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    15.748] (II) No input driver specified, ignoring this device.
[    15.748] (II) This device may have been added with another device file.
[    15.787] failed to add fb -22
[    15.787] (EE) modeset(0): failed to set mode: Invalid argument
[    37.709] (II) event0  - Power Button: device removed
[    37.747] (II) event1  - Sleep Button: device removed
[    37.767] (II) event2  - Video Bus: device removed
[    37.815] (II) event6  - VirtualBox mouse integration: device removed
[    37.879] (II) event4  - VirtualBox USB Tablet: device removed
[    38.108] (II) event3  - AT Translated Set 2 keyboard: device removed
[    38.135] (II) event7  - ImExPS/2 Generic Explorer Mouse: device removed
[    38.179] (II) AIGLX: Suspending AIGLX clients for VT switch

Offline

#30 2020-01-20 23:52:22

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

Restarting a service is covered in Systemd#Using_units.

Offline

#31 2020-01-20 23:55:46

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

Thank you, restarting it did not work, here are the contents of Xorg.0.log:

[   644.553] 
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[   644.553] Build Operating System: Linux Arch Linux
[   644.553] Current Operating System: Linux vm 5.4.13-arch1-1 #1 SMP PREEMPT Fri, 17 Jan 2020 23:09:54 +0000 x86_64
[   644.553] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30a6afc2-cb8e-4674-97a6-1eeca844eb56 rw loglevel=3 quiet
[   644.553] Build Date: 14 January 2020  07:13:52AM
[   644.553]  
[   644.553] Current version of pixman: 0.38.4
[   644.553] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   644.553] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   644.553] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 20 23:54:02 2020
[   644.553] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   644.553] (==) No Layout section.  Using the first Screen section.
[   644.553] (==) No screen section available. Using defaults.
[   644.553] (**) |-->Screen "Default Screen Section" (0)
[   644.553] (**) |   |-->Monitor "<default monitor>"
[   644.553] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   644.553] (==) Automatically adding devices
[   644.553] (==) Automatically enabling devices
[   644.553] (==) Automatically adding GPU devices
[   644.553] (==) Automatically binding GPU devices
[   644.553] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   644.553] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   644.553] 	Entry deleted from font path.
[   644.553] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   644.554] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   644.554] 	Entry deleted from font path.
[   644.554] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   644.554] 	Entry deleted from font path.
[   644.554] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   644.554] 	Entry deleted from font path.
[   644.554] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   644.554] (==) ModulePath set to "/usr/lib/xorg/modules"
[   644.554] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   644.554] (II) Module ABI versions:
[   644.554] 	X.Org ANSI C Emulation: 0.4
[   644.554] 	X.Org Video Driver: 24.1
[   644.554] 	X.Org XInput driver : 24.1
[   644.554] 	X.Org Server Extension : 10.0
[   644.555] (++) using VT number 7

[   644.555] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   644.555] (II) xfree86: Adding drm device (/dev/dri/card0)
[   644.558] (--) PCI:*(0@0:2:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xf0000000/134217728, 0xf8000000/2097152, I/O @ 0x0000d010/16, BIOS @ 0x????????/131072
[   644.558] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   644.558] (II) LoadModule: "glx"
[   644.558] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   644.559] (II) Module glx: vendor="X.Org Foundation"
[   644.559] 	compiled for 1.20.7, module version = 1.0.0
[   644.559] 	ABI class: X.Org Server Extension, version 10.0
[   644.559] (==) Matched vmware as autoconfigured driver 0
[   644.559] (==) Matched modesetting as autoconfigured driver 1
[   644.559] (==) Matched fbdev as autoconfigured driver 2
[   644.559] (==) Matched vesa as autoconfigured driver 3
[   644.559] (==) Assigned the driver to the xf86ConfigLayout
[   644.559] (II) LoadModule: "vmware"
[   644.559] (WW) Warning, couldn't open module vmware
[   644.559] (EE) Failed to load module "vmware" (module does not exist, 0)
[   644.559] (II) LoadModule: "modesetting"
[   644.559] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   644.560] (II) Module modesetting: vendor="X.Org Foundation"
[   644.560] 	compiled for 1.20.7, module version = 1.20.7
[   644.560] 	Module class: X.Org Video Driver
[   644.560] 	ABI class: X.Org Video Driver, version 24.1
[   644.560] (II) LoadModule: "fbdev"
[   644.560] (WW) Warning, couldn't open module fbdev
[   644.560] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   644.560] (II) LoadModule: "vesa"
[   644.560] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   644.560] (II) Module vesa: vendor="X.Org Foundation"
[   644.560] 	compiled for 1.20.0, module version = 2.4.0
[   644.560] 	Module class: X.Org Video Driver
[   644.560] 	ABI class: X.Org Video Driver, version 24.0
[   644.560] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   644.560] (II) VESA: driver for VESA chipsets: vesa
[   644.561] (II) modeset(0): using drv /dev/dri/card0
[   644.561] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   644.561] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   644.561] (==) modeset(0): RGB weight 888
[   644.561] (==) modeset(0): Default visual is TrueColor
[   644.561] (II) Loading sub module "glamoregl"
[   644.561] (II) LoadModule: "glamoregl"
[   644.561] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   644.564] (II) Module glamoregl: vendor="X.Org Foundation"
[   644.564] 	compiled for 1.20.7, module version = 1.0.1
[   644.564] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   644.618] (II) modeset(0): glamor X acceleration enabled on SVGA3D; build: RELEASE;  LLVM;
[   644.618] (II) modeset(0): glamor initialized
[   644.618] (II) modeset(0): Output Virtual-1 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-2 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-3 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-4 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-5 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-6 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-7 has no monitor section
[   644.618] (II) modeset(0): Output Virtual-8 has no monitor section
[   644.618] (II) modeset(0): EDID for output Virtual-1
[   644.618] (II) modeset(0): Printing probed modes for output Virtual-1
[   644.618] (II) modeset(0): Modeline "preferred"x60.0   42.75  800 850 900 950  600 650 700 750 -hsync +vsync (45.0 kHz eP)
[   644.618] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2752 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[   644.618] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[   644.618] (II) modeset(0): Modeline "1856x1392"x60.0  218.25  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[   644.618] (II) modeset(0): Modeline "1792x1344"x60.0  204.75  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[   644.618] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[   644.618] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   644.618] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   644.618] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[   644.618] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   644.618] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   644.618] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   644.618] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[   644.618] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   644.618] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   644.618] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   644.618] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   644.618] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   644.618] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[   644.618] (II) modeset(0): EDID for output Virtual-2
[   644.618] (II) modeset(0): EDID for output Virtual-3
[   644.618] (II) modeset(0): EDID for output Virtual-4
[   644.618] (II) modeset(0): EDID for output Virtual-5
[   644.618] (II) modeset(0): EDID for output Virtual-6
[   644.618] (II) modeset(0): EDID for output Virtual-7
[   644.618] (II) modeset(0): EDID for output Virtual-8
[   644.618] (II) modeset(0): Output Virtual-1 connected
[   644.618] (II) modeset(0): Output Virtual-2 disconnected
[   644.618] (II) modeset(0): Output Virtual-3 disconnected
[   644.618] (II) modeset(0): Output Virtual-4 disconnected
[   644.618] (II) modeset(0): Output Virtual-5 disconnected
[   644.618] (II) modeset(0): Output Virtual-6 disconnected
[   644.619] (II) modeset(0): Output Virtual-7 disconnected
[   644.619] (II) modeset(0): Output Virtual-8 disconnected
[   644.619] (II) modeset(0): Using exact sizes for initial modes
[   644.619] (II) modeset(0): Output Virtual-1 using initial mode preferred +0+0
[   644.619] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   644.619] (==) modeset(0): DPI set to (96, 96)
[   644.619] (II) Loading sub module "fb"
[   644.619] (II) LoadModule: "fb"
[   644.619] (II) Loading /usr/lib/xorg/modules/libfb.so
[   644.619] (II) Module fb: vendor="X.Org Foundation"
[   644.619] 	compiled for 1.20.7, module version = 1.0.0
[   644.619] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   644.619] (II) UnloadModule: "vesa"
[   644.619] (II) Unloading vesa
[   644.675] (==) modeset(0): Backing store enabled
[   644.675] (==) modeset(0): Silken mouse disabled
[   644.675] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   644.675] (==) modeset(0): DPMS enabled
[   644.676] (II) modeset(0): [DRI2] Setup complete
[   644.676] (II) modeset(0): [DRI2]   DRI driver: vmwgfx
[   644.676] (II) modeset(0): [DRI2]   VDPAU driver: vmwgfx
[   644.676] (II) Initializing extension Generic Event Extension
[   644.676] (II) Initializing extension SHAPE
[   644.676] (II) Initializing extension MIT-SHM
[   644.676] (II) Initializing extension XInputExtension
[   644.676] (II) Initializing extension XTEST
[   644.676] (II) Initializing extension BIG-REQUESTS
[   644.677] (II) Initializing extension SYNC
[   644.677] (II) Initializing extension XKEYBOARD
[   644.677] (II) Initializing extension XC-MISC
[   644.677] (II) Initializing extension SECURITY
[   644.677] (II) Initializing extension XFIXES
[   644.677] (II) Initializing extension RENDER
[   644.678] (II) Initializing extension RANDR
[   644.678] (II) Initializing extension COMPOSITE
[   644.678] (II) Initializing extension DAMAGE
[   644.678] (II) Initializing extension MIT-SCREEN-SAVER
[   644.678] (II) Initializing extension DOUBLE-BUFFER
[   644.678] (II) Initializing extension RECORD
[   644.679] (II) Initializing extension DPMS
[   644.679] (II) Initializing extension Present
[   644.679] (II) Initializing extension DRI3
[   644.679] (II) Initializing extension X-Resource
[   644.679] (II) Initializing extension XVideo
[   644.680] (II) Initializing extension XVideo-MotionCompensation
[   644.680] (II) Initializing extension GLX
[   644.683] (II) AIGLX: Loaded and initialized vmwgfx
[   644.683] (II) GLX: Initialized DRI2 GL provider for screen 0
[   644.683] (II) Initializing extension XFree86-VidModeExtension
[   644.683] (II) Initializing extension XFree86-DGA
[   644.684] (II) Initializing extension XFree86-DRI
[   644.684] (II) Initializing extension DRI2
[   644.685] (II) modeset(0): Damage tracking initialized
[   644.685] (II) modeset(0): Setting screen physical size to 211 x 158
[   644.764] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   644.764] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   644.764] (II) LoadModule: "libinput"
[   644.764] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   644.765] (II) Module libinput: vendor="X.Org Foundation"
[   644.765] 	compiled for 1.20.5, module version = 0.29.0
[   644.765] 	Module class: X.Org XInput Driver
[   644.765] 	ABI class: X.Org XInput driver, version 24.1
[   644.765] (II) Using input driver 'libinput' for 'Power Button'
[   644.765] (**) Power Button: always reports core events
[   644.765] (**) Option "Device" "/dev/input/event0"
[   644.765] (**) Option "_source" "server/udev"
[   644.767] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   644.767] (II) event0  - Power Button: device is a keyboard
[   644.767] (II) event0  - Power Button: device removed
[   644.815] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[   644.815] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   644.816] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   644.816] (II) event0  - Power Button: device is a keyboard
[   644.817] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   644.817] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   644.817] (II) Using input driver 'libinput' for 'Sleep Button'
[   644.817] (**) Sleep Button: always reports core events
[   644.817] (**) Option "Device" "/dev/input/event1"
[   644.817] (**) Option "_source" "server/udev"
[   644.817] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   644.817] (II) event1  - Sleep Button: device is a keyboard
[   644.817] (II) event1  - Sleep Button: device removed
[   644.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[   644.847] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   644.849] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   644.849] (II) event1  - Sleep Button: device is a keyboard
[   644.851] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   644.851] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   644.851] (II) Using input driver 'libinput' for 'Video Bus'
[   644.851] (**) Video Bus: always reports core events
[   644.851] (**) Option "Device" "/dev/input/event2"
[   644.851] (**) Option "_source" "server/udev"
[   644.853] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   644.854] (II) event2  - Video Bus: device is a keyboard
[   644.854] (II) event2  - Video Bus: device removed
[   644.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[   644.919] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   644.924] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   644.926] (II) event2  - Video Bus: device is a keyboard
[   644.930] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event6)
[   644.930] (**) VirtualBox mouse integration: Applying InputClass "libinput pointer catchall"
[   644.930] (II) Using input driver 'libinput' for 'VirtualBox mouse integration'
[   644.930] (**) VirtualBox mouse integration: always reports core events
[   644.930] (**) Option "Device" "/dev/input/event6"
[   644.930] (**) Option "_source" "server/udev"
[   644.933] (II) event6  - VirtualBox mouse integration: is tagged by udev as: Mouse
[   644.934] (II) event6  - VirtualBox mouse integration: device is a pointer
[   644.935] (II) event6  - VirtualBox mouse integration: device removed
[   644.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input7/event6"
[   644.985] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 9)
[   644.985] (**) Option "AccelerationScheme" "none"
[   644.986] (**) VirtualBox mouse integration: (accel) selected scheme none/0
[   644.986] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[   644.986] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[   644.990] (II) event6  - VirtualBox mouse integration: is tagged by udev as: Mouse
[   644.991] (II) event6  - VirtualBox mouse integration: device is a pointer
[   644.993] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[   644.993] (II) No input driver specified, ignoring this device.
[   644.993] (II) This device may have been added with another device file.
[   644.994] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/mouse1)
[   644.994] (II) No input driver specified, ignoring this device.
[   644.994] (II) This device may have been added with another device file.
[   644.997] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[   644.997] (**) VirtualBox USB Tablet: Applying InputClass "libinput pointer catchall"
[   644.997] (II) Using input driver 'libinput' for 'VirtualBox USB Tablet'
[   644.997] (**) VirtualBox USB Tablet: always reports core events
[   644.997] (**) Option "Device" "/dev/input/event4"
[   644.997] (**) Option "_source" "server/udev"
[   645.058] (II) event4  - VirtualBox USB Tablet: is tagged by udev as: Mouse
[   645.060] (II) event4  - VirtualBox USB Tablet: device is a pointer
[   645.060] (II) event4  - VirtualBox USB Tablet: device removed
[   645.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input5/event4"
[   645.174] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 10)
[   645.175] (**) Option "AccelerationScheme" "none"
[   645.175] (**) VirtualBox USB Tablet: (accel) selected scheme none/0
[   645.176] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[   645.176] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[   645.308] (II) event4  - VirtualBox USB Tablet: is tagged by udev as: Mouse
[   645.309] (II) event4  - VirtualBox USB Tablet: device is a pointer
[   645.313] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[   645.313] (II) No input driver specified, ignoring this device.
[   645.313] (II) This device may have been added with another device file.
[   645.315] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[   645.315] (II) No input driver specified, ignoring this device.
[   645.315] (II) This device may have been added with another device file.
[   645.317] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   645.317] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   645.317] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   645.317] (**) AT Translated Set 2 keyboard: always reports core events
[   645.317] (**) Option "Device" "/dev/input/event3"
[   645.317] (**) Option "_source" "server/udev"
[   645.322] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   645.322] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   645.324] (II) event3  - AT Translated Set 2 keyboard: device removed
[   645.629] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   645.629] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   645.632] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   645.633] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   645.635] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7)
[   645.635] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[   645.635] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[   645.635] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[   645.635] (**) Option "Device" "/dev/input/event7"
[   645.635] (**) Option "_source" "server/udev"
[   645.638] (II) event7  - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[   645.638] (II) event7  - ImExPS/2 Generic Explorer Mouse: device is a pointer
[   645.639] (II) event7  - ImExPS/2 Generic Explorer Mouse: device removed
[   645.687] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[   645.687] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 12)
[   645.688] (**) Option "AccelerationScheme" "none"
[   645.688] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[   645.688] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[   645.688] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[   645.691] (II) event7  - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[   645.691] (II) event7  - ImExPS/2 Generic Explorer Mouse: device is a pointer
[   645.693] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[   645.693] (II) No input driver specified, ignoring this device.
[   645.693] (II) This device may have been added with another device file.
[   645.694] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   645.694] (II) No input driver specified, ignoring this device.
[   645.694] (II) This device may have been added with another device file.
[   645.716] failed to add fb -22
[   645.716] (EE) modeset(0): failed to set mode: Invalid argument
[   657.160] (II) event0  - Power Button: device removed
[   657.198] (II) event1  - Sleep Button: device removed
[   657.222] (II) event2  - Video Bus: device removed
[   657.324] (II) event6  - VirtualBox mouse integration: device removed
[   657.389] (II) event4  - VirtualBox USB Tablet: device removed
[   657.503] (II) event3  - AT Translated Set 2 keyboard: device removed
[   657.556] (II) event7  - ImExPS/2 Generic Explorer Mouse: device removed
[   657.757] (II) AIGLX: Suspending AIGLX clients for VT switch

Offline

#32 2020-01-21 00:01:58

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

X looks to be working now.  So the next issue is probably in lightdm.  When you chose the lightdm-webkit2-greeter did you configure lightdm to use that greeter?
Please post the contents of /etc/lightdm/lightdm.conf

Last edited by loqs (2020-01-21 00:02:09)

Offline

#33 2020-01-21 00:09:07

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

Yes I did, however I have switched to lightdm-gtk-greeter to see if it was a problem with the previous greeter, here is the current config

#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
logind-check-graphical=true
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#greeter-session=lightdm-gtk-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

Offline

#34 2020-01-21 00:14:34

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

lightdm.conf looks fine what is the contents of /var/log/lightdm/lightdm.log now?
Edit:
Just to check when you switched the greeter to lightdm-gtk-greeter you did install the lightdm-gtk-greeter package?

Last edited by loqs (2020-01-21 00:16:51)

Offline

#35 2020-01-21 00:24:22

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

Yes I did, here what I get from /var/log/lightdm/lightdm.log

[+0.01s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.01s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=417
[+0.01s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.01s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.01s] DEBUG: Registered seat module local
[+0.01s] DEBUG: Registered seat module xremote
[+0.01s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.12s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.47s] DEBUG: Monitoring logind for seats
[+0.47s] DEBUG: New seat added from logind: seat0
[+0.47s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.47s] DEBUG: Seat seat0: Starting
[+0.47s] DEBUG: Seat seat0: Creating greeter session
[+0.50s] DEBUG: Seat seat0: Creating display server of type x
[+0.50s] DEBUG: posix_spawn avoided (fd close requested) 
[+0.50s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.50s] DEBUG: Using VT 7
[+0.50s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.50s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+0.52s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+0.52s] DEBUG: XServer 0: Launching X Server
[+0.52s] DEBUG: Launching process 423: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.52s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.52s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.52s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.54s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
[+0.54s] DEBUG: Loading user config from /etc/lightdm/users.conf
[+0.57s] DEBUG: User jarod added
[+0.57s] DEBUG: posix_spawn avoided (automatic reaping requested) (fd close requested) 
[+4.84s] DEBUG: Got signal 10 from process 423
[+4.84s] DEBUG: XServer 0: Got signal from X server :0
[+4.84s] DEBUG: XServer 0: Connecting to XServer :0
[+4.87s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+4.87s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+4.87s] DEBUG: Session pid=429: Started with service 'lightdm-greeter', username 'lightdm'
[+4.99s] DEBUG: Session pid=429: Authentication complete with return value 0: Success
[+4.99s] DEBUG: Seat seat0: Session authenticated, running command
[+4.99s] DEBUG: Session pid=429: Running command /usr/bin/lightdm-gtk-greeter
[+4.99s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+4.99s] DEBUG: Session pid=429: Logging to /var/log/lightdm/seat0-greeter.log
[+5.44s] DEBUG: Activating VT 7
[+5.44s] DEBUG: Activating login1 session c1
[+5.44s] DEBUG: Seat seat0 changes active session to c1
[+5.44s] DEBUG: Session c1 is already active
[+6.64s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+7.91s] DEBUG: Greeter start authentication for jarod
[+7.91s] DEBUG: Session pid=470: Started with service 'lightdm', username 'jarod'
[+8.13s] DEBUG: Session pid=470: Got 1 message(s) from PAM
[+8.13s] DEBUG: Prompt greeter with 1 message(s)
[+16.86s] DEBUG: Seat seat0 changes active session to 
[+21.25s] DEBUG: Seat seat0 changes active session to 2
[+901.03s] DEBUG: Seat seat0 changes active session to 
[+903.86s] DEBUG: Seat seat0 changes active session to 4

Offline

#36 2020-01-21 00:32:20

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

I can not spot any issues from lightdm.log.  The greeter is started and is waiting for a password.

Last edited by loqs (2020-01-21 00:37:59)

Offline

#37 2020-01-21 00:34:32

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

could it be a problem with openbox?

Offline

#38 2020-01-21 00:46:54

loqs
Member
Registered: 2014-03-06
Posts: 19,089

Re: Light dm cant create session

I would not have thought openbox would be a factor as it would only start after the greeter and would expect to see something similar to the following in /var/log/lightdm/lightdm.log

[+9.60s] DEBUG: Continue authentication
[+9.64s] DEBUG: Session pid=470: Authentication complete with return value 0: Success
[+9.64s] DEBUG: Authenticate result for user jarod: Success
[+9.64s] DEBUG: User jarod authorized
[+9.64s] DEBUG: Greeter sets language en_US.utf8
[+9.65s] DEBUG: Greeter requests session openbox
[+9.65s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+9.65s] DEBUG: Terminating login1 session c1
[+9.65s] DEBUG: Session pid=429: Sending SIGTERM
[+9.67s] DEBUG: Greeter closed communication channel
[+9.67s] DEBUG: Session pid=429: Exited with return value 0
[+9.67s] DEBUG: Seat seat0: Session stopped
[+9.67s] DEBUG: Seat seat0: Greeter stopped, running session
[+9.67s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+9.67s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+9.67s] DEBUG: Session pid=500: Running command /etc/lightdm/Xsession openbox-session
[+9.67s] DEBUG: Creating shared data directory /var/lib/lightdm-data/jarod
[+9.67s] DEBUG: Session pid=500: Logging to .xsession-errors
[+9.84s] DEBUG: Activating VT 7
[+9.84s] DEBUG: Activating login1 session c2
[+9.84s] DEBUG: Seat seat0 changes active session to c2
[+9.84s] DEBUG: Session c2 is already active

Offline

#39 2020-01-21 11:13:19

Head_on_a_Stick
Member
From: The Wirral
Registered: 2014-02-20
Posts: 9,003
Website

Re: Light dm cant create session

Have you seen https://wiki.archlinux.org/index.php/Li … n_flashing? And please read the rest of that page because it seems like you're relying on the goodwill of the helpers to do your legwork, which isn't cool.

Can you start openbox from a console screen?

Use the systemd.unit=multi-user.target kernel parameter to disable LightDM temporarily[1] then log in as your normal user and run

startx /usr/bin/openbox-session

Does that work?

LightDM is a poor choice of display manager anyway because it runs X as root. GDM or startx from a console login are both better solutions.

Jin, Jîyan, Azadî

Offline

#40 2020-01-21 15:19:50

Yeltrah
Member
Registered: 2020-01-19
Posts: 20

Re: Light dm cant create session

Hi yes you are right I am sorry, I only picked up Linux a few days ago and have no idea what im doing,

I ran 

 systemctl disable lightmd

I don't know if this is what you meant, I then tried to run 

startx /usr/bin/openbox-session

but it said that startx command was not found

I also looked in my xsessions directory and it was blank, I think there aee supposed to be .desktop files in there but im not sure how to add them

Offline

#41 2020-01-21 15:25:32

eschwartz
Fellow
Registered: 2014-08-08
Posts: 4,097

Re: Light dm cant create session

Yeltrah wrote:

but it said that startx command was not found

So you'll need to install it.

See https://wiki.archlinux.org/index.php/Pkgfile, which helps you figure out what package to install when you need a given program. It's an important tool and well worth learning.

Managing AUR repos The Right Way -- aurpublish (now a standalone tool)

Offline

Pages: 1 2

Board footer

Powered by FluxBB