You are not logged in.
Pages: 1
Hi there
I'm new to arch, and try to setup the basic install but I'm already stuck at the Wifi setup.
I followed the installation wiki until connecting to wireless Network
Then i followed the Network page until to WPA2 Personal
I chose netctl as a Network Manager and followed the Netctl page
When I want to start my profile:
# netctl start wireless-wpa
Job for netctl@wireless\x2dwpa.service failed because the control process exited with error code.
I tried the tips in the troubleshooting chapter
# ip link set wlan0 down
# netctl start wlan0-ssid
and added
ForceConnect=yes
to /etc/netctl/wireless-wpa
but it didn't help
# journalctl -xi (only red errors)
: WPA association/authentication failed for interface 'wlan0'
: Failed to bring the network up for profile 'wireless-wpa'
: Failed to start A simple WPA encrypted wireless connection
# systemctl list-unit-files --state=enabled
UNIT FILE STATE
autovt@.service enabled
choose-mirror.service enabled
getty@.service enabled
netctl.service enabled
pacman-init.service enabled
remote-fs.target enabled
#ip a
3: wlan0: <BROADCAST,MULTICAST> > mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether [...] brd [...]
#ip r
# ping 8.8.8.8
ping: connect: Network is unreachable
Any Ideas?
Thanks a lot
Giuseppe
Last edited by GiuseppeSchnee (2020-01-25 12:49:10)
Offline
(only red errors)
Don't do that. I take it the ip r command produced no output at all?
The standard advice at this stage is to follow the manual connection procedure detailed on the ArchWiki Wireless page and post any errors. But I don't use netctl so I may have missed something obvious (sorry).
Offline
Sorry, I have to type in all the errors
Yes ip r produced no output.
Ok I'll try manually
Last edited by GiuseppeSchnee (2020-01-25 08:22:05)
Offline
I have to type in all the errors
Offline
Thx for this one!
I disabled netctl and removed the corresponding Profile
# netctl disable profile
# systemctl disable netctl
# rm netctl/examples/wireless-wpa
And proceded with WPA Supplicant,
then got a IP when I continued with Dhcpcd
Wifi is working now.
Thank you Head_on_a_Stick for your help
Giuseppe
Last edited by GiuseppeSchnee (2020-01-25 12:48:17)
Offline
Pages: 1