You are not logged in.

#1 2020-02-05 18:52:39

kensai
Member
From: Puerto Rico
Registered: 2005-06-03
Posts: 2,484
Website

PrimaryGPU not working after Nvidia 440.59

Hi, been off of linux for quite some time. Got everything running a month ago and everything has been working fine. I use Option "PrimaryGPU" "yes" to make the nvidia 1070 card to be my primary instead of the intel integrated one. Everything was going fine, with 440.44 then it upgraded to 440.48 everything worked but with 440.59 it only uses my intel graphics it does not use Nvidia, not with PRIME not with Optimus. So I'm out of things to do, can you guys help me troubleshoot, been so long off linux I forgot a lot of things.

Thanks in advance


Follow me in: Identi.ca, Twitter, Google+

Offline

#2 2020-02-05 19:31:30

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,670

Re: PrimaryGPU not working after Nvidia 440.59

Post your xorg.log and the xorg config where you've added PrimaryGPU. PrimaryGPU is primarily a xorg option that doesn't relate to your actual driver so it's unlikely that that specific update broke this, unless you've added that directive to /usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf which predictably gets overwritten on nvidia-utils updates, you should put a file containing the PrimaryGPU option into /etc/X11/xorg.conf.d instead.

Online

#3 2020-02-05 19:46:22

kensai
Member
From: Puerto Rico
Registered: 2005-06-03
Posts: 2,484
Website

Re: PrimaryGPU not working after Nvidia 440.59

[     5.261] (--) Log file renamed from "/var/log/Xorg.pid-620.log" to "/var/log/Xorg.0.log"
[     5.263] 
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[     5.263] Build Operating System: Linux Arch Linux
[     5.263] Current Operating System: Linux alien 5.5.2-zen2-1-zen #1 ZEN SMP PREEMPT Wed, 05 Feb 2020 09:15:04 +0000 x86_64
[     5.263] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=b62dce1e-b65b-4a38-a509-c7066271d958 rw loglevel=3 quiet nvidia-drm.modeset=1
[     5.263] Build Date: 14 January 2020  07:13:52AM
[     5.263]  
[     5.263] Current version of pixman: 0.38.4
[     5.263] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.263] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.263] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb  5 12:06:09 2020
[     5.267] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.267] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.270] (==) ServerLayout "layout"
[     5.270] (==) No screen section available. Using defaults.
[     5.270] (**) |-->Screen "Default Screen Section" (0)
[     5.270] (**) |   |-->Monitor "<default monitor>"
[     5.270] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.270] (==) Automatically adding devices
[     5.270] (==) Automatically enabling devices
[     5.270] (==) Automatically adding GPU devices
[     5.270] (==) Automatically binding GPU devices
[     5.270] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     5.272] 	Entry deleted from font path.
[     5.272] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     5.273] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.273] 	Entry deleted from font path.
[     5.273] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.273] 	Entry deleted from font path.
[     5.274] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     5.274] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.274] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.274] (II) Module ABI versions:
[     5.274] 	X.Org ANSI C Emulation: 0.4
[     5.274] 	X.Org Video Driver: 24.1
[     5.274] 	X.Org XInput driver : 24.1
[     5.274] 	X.Org Server Extension : 10.0
[     5.274] (++) using VT number 1

[     5.274] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.275] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.289] (--) PCI:*(0@0:2:0) 8086:591b:1028:0778 rev 4, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.289] (--) PCI: (1@0:0:0) 10de:1ba1:1028:0778 rev 161, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.289] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.289] (II) LoadModule: "glx"
[     5.289] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.301] (II) Module glx: vendor="X.Org Foundation"
[     5.301] 	compiled for 1.20.7, module version = 1.0.0
[     5.301] 	ABI class: X.Org Server Extension, version 10.0
[     5.301] (==) Matched intel as autoconfigured driver 0
[     5.301] (==) Matched modesetting as autoconfigured driver 1
[     5.301] (==) Matched fbdev as autoconfigured driver 2
[     5.301] (==) Matched vesa as autoconfigured driver 3
[     5.301] (==) Assigned the driver to the xf86ConfigLayout
[     5.301] (II) LoadModule: "intel"
[     5.301] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.304] (II) Module intel: vendor="X.Org Foundation"
[     5.304] 	compiled for 1.20.6, module version = 2.99.917
[     5.304] 	Module class: X.Org Video Driver
[     5.304] 	ABI class: X.Org Video Driver, version 24.0
[     5.304] (II) LoadModule: "modesetting"
[     5.304] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.307] (II) Module modesetting: vendor="X.Org Foundation"
[     5.307] 	compiled for 1.20.7, module version = 1.20.7
[     5.307] 	Module class: X.Org Video Driver
[     5.307] 	ABI class: X.Org Video Driver, version 24.1
[     5.307] (II) LoadModule: "fbdev"
[     5.307] (WW) Warning, couldn't open module fbdev
[     5.307] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.307] (II) LoadModule: "vesa"
[     5.307] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.307] (II) Module vesa: vendor="X.Org Foundation"
[     5.307] 	compiled for 1.20.0, module version = 2.4.0
[     5.307] 	Module class: X.Org Video Driver
[     5.307] 	ABI class: X.Org Video Driver, version 24.0
[     5.307] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.308] (II) intel: Driver for Intel(R) HD Graphics
[     5.308] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     5.308] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     5.308] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.308] (II) VESA: driver for VESA chipsets: vesa
[     5.308] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20191101
[     5.308] (II) intel(0): SNA compiled from 2.99.917-899-gf66d3954
[     5.321] (WW) Falling back to old probe method for modesetting
[     5.322] (--) intel(0): gen9 engineering sample
[     5.322] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     5.322] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.322] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.322] (==) intel(0): RGB weight 888
[     5.322] (==) intel(0): Default visual is TrueColor
[     5.323] (II) intel(0): Output eDP1 has no monitor section
[     5.323] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     5.323] (II) intel(0): Enabled output eDP1
[     5.323] (II) intel(0): Output DP1 has no monitor section
[     5.323] (II) intel(0): Enabled output DP1
[     5.323] (II) intel(0): Output HDMI1 has no monitor section
[     5.323] (II) intel(0): Enabled output HDMI1
[     5.323] (II) intel(0): Output DP2 has no monitor section
[     5.323] (II) intel(0): Enabled output DP2
[     5.323] (II) intel(0): Output HDMI2 has no monitor section
[     5.323] (II) intel(0): Enabled output HDMI2
[     5.323] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.323] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.323] (II) intel(0): Enabled output VIRTUAL1
[     5.323] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     5.324] (==) intel(0): TearFree enabled
[     5.324] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.324] (++) intel(0): DPI set to (96, 96)
[     5.324] (II) Loading sub module "dri3"
[     5.324] (II) LoadModule: "dri3"
[     5.324] (II) Module "dri3" already built-in
[     5.324] (II) Loading sub module "dri2"
[     5.324] (II) LoadModule: "dri2"
[     5.324] (II) Module "dri2" already built-in
[     5.324] (II) Loading sub module "present"
[     5.324] (II) LoadModule: "present"
[     5.324] (II) Module "present" already built-in
[     5.324] (II) UnloadModule: "modesetting"
[     5.324] (II) Unloading modesetting
[     5.324] (II) UnloadModule: "vesa"
[     5.324] (II) Unloading vesa
[     5.327] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[     5.327] (==) intel(0): Backing store enabled
[     5.327] (==) intel(0): Silken mouse disabled
[     5.327] (II) intel(0): HW Cursor enabled
[     5.327] (==) intel(0): DPMS enabled
[     5.327] (==) intel(0): Display hotplug detection enabled
[     5.328] (II) intel(0): [DRI2] Setup complete
[     5.328] (II) intel(0): [DRI2]   DRI driver: i965
[     5.328] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.328] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     5.328] (II) intel(0): hardware support for Present enabled
[     5.328] (II) Initializing extension Generic Event Extension
[     5.328] (II) Initializing extension SHAPE
[     5.328] (II) Initializing extension MIT-SHM
[     5.328] (II) Initializing extension XInputExtension
[     5.328] (II) Initializing extension XTEST
[     5.329] (II) Initializing extension BIG-REQUESTS
[     5.329] (II) Initializing extension SYNC
[     5.329] (II) Initializing extension XKEYBOARD
[     5.329] (II) Initializing extension XC-MISC
[     5.329] (II) Initializing extension SECURITY
[     5.329] (II) Initializing extension XFIXES
[     5.329] (II) Initializing extension RENDER
[     5.329] (II) Initializing extension RANDR
[     5.329] (II) Initializing extension COMPOSITE
[     5.329] (II) Initializing extension DAMAGE
[     5.329] (II) Initializing extension MIT-SCREEN-SAVER
[     5.329] (II) Initializing extension DOUBLE-BUFFER
[     5.330] (II) Initializing extension RECORD
[     5.330] (II) Initializing extension DPMS
[     5.330] (II) Initializing extension Present
[     5.330] (II) Initializing extension DRI3
[     5.330] (II) Initializing extension X-Resource
[     5.330] (II) Initializing extension XVideo
[     5.330] (II) Initializing extension XVideo-MotionCompensation
[     5.330] (II) Initializing extension GLX
[     5.359] (II) AIGLX: Loaded and initialized i965
[     5.359] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.359] (II) Initializing extension XFree86-VidModeExtension
[     5.359] (II) Initializing extension XFree86-DGA
[     5.359] (II) Initializing extension XFree86-DRI
[     5.359] (II) Initializing extension DRI2
[     5.362] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     5.369] (II) intel(0): Setting screen physical size to 508 x 285
[     5.436] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.436] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.436] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.436] (II) LoadModule: "libinput"
[     5.436] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.439] (II) Module libinput: vendor="X.Org Foundation"
[     5.439] 	compiled for 1.20.5, module version = 0.29.0
[     5.439] 	Module class: X.Org XInput Driver
[     5.439] 	ABI class: X.Org XInput driver, version 24.1
[     5.439] (II) Using input driver 'libinput' for 'Power Button'
[     5.439] (**) Power Button: always reports core events
[     5.439] (**) Option "Device" "/dev/input/event2"
[     5.439] (**) Option "_source" "server/udev"
[     5.444] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     5.444] (II) event2  - Power Button: device is a keyboard
[     5.444] (II) event2  - Power Button: device removed
[     5.453] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.453] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.453] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     5.453] (II) event2  - Power Button: device is a keyboard
[     5.454] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[     5.454] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.454] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.454] (II) Using input driver 'libinput' for 'Video Bus'
[     5.454] (**) Video Bus: always reports core events
[     5.454] (**) Option "Device" "/dev/input/event12"
[     5.454] (**) Option "_source" "server/udev"
[     5.454] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[     5.454] (II) event12 - Video Bus: device is a keyboard
[     5.455] (II) event12 - Video Bus: device removed
[     5.471] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event12"
[     5.471] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.471] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[     5.471] (II) event12 - Video Bus: device is a keyboard
[     5.472] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     5.472] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.472] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     5.472] (II) Using input driver 'libinput' for 'Video Bus'
[     5.472] (**) Video Bus: always reports core events
[     5.472] (**) Option "Device" "/dev/input/event13"
[     5.472] (**) Option "_source" "server/udev"
[     5.473] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     5.473] (II) event13 - Video Bus: device is a keyboard
[     5.473] (II) event13 - Video Bus: device removed
[     5.490] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input17/event13"
[     5.490] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     5.491] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     5.491] (II) event13 - Video Bus: device is a keyboard
[     5.491] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     5.491] (II) No input driver specified, ignoring this device.
[     5.491] (II) This device may have been added with another device file.
[     5.491] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.491] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.492] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.492] (II) Using input driver 'libinput' for 'Power Button'
[     5.492] (**) Power Button: always reports core events
[     5.492] (**) Option "Device" "/dev/input/event1"
[     5.492] (**) Option "_source" "server/udev"
[     5.492] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.492] (II) event1  - Power Button: device is a keyboard
[     5.492] (II) event1  - Power Button: device removed
[     5.507] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     5.507] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.507] (II) event1  - Power Button: device is a keyboard
[     5.508] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event22)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.508] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event23)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.508] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event24)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.508] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event25)
[     5.508] (II) No input driver specified, ignoring this device.
[     5.508] (II) This device may have been added with another device file.
[     5.509] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event26)
[     5.509] (II) No input driver specified, ignoring this device.
[     5.509] (II) This device may have been added with another device file.
[     5.509] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event27)
[     5.509] (II) No input driver specified, ignoring this device.
[     5.509] (II) This device may have been added with another device file.
[     5.509] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event28)
[     5.509] (II) No input driver specified, ignoring this device.
[     5.509] (II) This device may have been added with another device file.
[     5.510] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event4)
[     5.510] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[     5.510] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[     5.510] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[     5.510] (**) Logitech Gaming Mouse G502: always reports core events
[     5.510] (**) Option "Device" "/dev/input/event4"
[     5.510] (**) Option "_source" "server/udev"
[     5.562] (II) event4  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     5.562] (II) event4  - Logitech Gaming Mouse G502: device set to 2400 DPI
[     5.562] (II) event4  - Logitech Gaming Mouse G502: device is a pointer
[     5.563] (II) event4  - Logitech Gaming Mouse G502: device removed
[     5.587] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C332.0001/input/input5/event4"
[     5.587] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 10)
[     5.587] (**) Option "AccelerationScheme" "none"
[     5.587] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[     5.587] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[     5.587] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[     5.639] (II) event4  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     5.639] (II) event4  - Logitech Gaming Mouse G502: device set to 2400 DPI
[     5.639] (II) event4  - Logitech Gaming Mouse G502: device is a pointer
[     5.640] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[     5.640] (II) No input driver specified, ignoring this device.
[     5.640] (II) This device may have been added with another device file.
[     5.640] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event5)
[     5.640] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[     5.640] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[     5.640] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[     5.640] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[     5.640] (**) Option "Device" "/dev/input/event5"
[     5.640] (**) Option "_source" "server/udev"
[     5.641] (II) event5  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     5.641] (II) event5  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     5.641] (II) event5  - Logitech Gaming Mouse G502 Keyboard: device removed
[     5.651] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input6/event5"
[     5.651] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 11)
[     5.652] (II) event5  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     5.652] (II) event5  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     5.652] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Consumer Control (/dev/input/event6)
[     5.652] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.652] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.652] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[     5.652] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[     5.652] (**) Option "Device" "/dev/input/event6"
[     5.652] (**) Option "_source" "server/udev"
[     5.653] (II) event6  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[     5.653] (II) event6  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[     5.653] (II) event6  - Logitech Gaming Mouse G502 Consumer Control: device removed
[     5.663] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: needs a virtual subdevice
[     5.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input7/event6"
[     5.663] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: MOUSE, id 12)
[     5.663] (**) Option "AccelerationScheme" "none"
[     5.663] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) selected scheme none/0
[     5.663] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration factor: 2.000
[     5.663] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration threshold: 4
[     5.664] (II) event6  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[     5.664] (II) event6  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[     5.664] (II) config/udev: Adding input device Logitech Gaming Mouse G502 System Control (/dev/input/event7)
[     5.664] (**) Logitech Gaming Mouse G502 System Control: Applying InputClass "libinput keyboard catchall"
[     5.664] (**) Logitech Gaming Mouse G502 System Control: Applying InputClass "libinput keyboard catchall"
[     5.664] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 System Control'
[     5.664] (**) Logitech Gaming Mouse G502 System Control: always reports core events
[     5.664] (**) Option "Device" "/dev/input/event7"
[     5.664] (**) Option "_source" "server/udev"
[     5.665] (II) event7  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[     5.665] (II) event7  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[     5.665] (II) event7  - Logitech Gaming Mouse G502 System Control: device removed
[     5.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input8/event7"
[     5.680] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 System Control" (type: KEYBOARD, id 13)
[     5.681] (II) event7  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[     5.681] (II) event7  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[     5.681] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event11)
[     5.681] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[     5.681] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[     5.681] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[     5.681] (**) Integrated_Webcam_HD: Integrate: always reports core events
[     5.681] (**) Option "Device" "/dev/input/event11"
[     5.681] (**) Option "_source" "server/udev"
[     5.682] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[     5.682] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[     5.682] (II) event11 - Integrated_Webcam_HD: Integrate: device removed
[     5.699] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input15/event11"
[     5.699] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 14)
[     5.700] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[     5.700] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[     5.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[     5.700] (II) No input driver specified, ignoring this device.
[     5.700] (II) This device may have been added with another device file.
[     5.700] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event16)
[     5.700] (II) No input driver specified, ignoring this device.
[     5.700] (II) This device may have been added with another device file.
[     5.700] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     5.700] (II) No input driver specified, ignoring this device.
[     5.700] (II) This device may have been added with another device file.
[     5.701] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     5.701] (II) No input driver specified, ignoring this device.
[     5.701] (II) This device may have been added with another device file.
[     5.701] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     5.701] (II) No input driver specified, ignoring this device.
[     5.701] (II) This device may have been added with another device file.
[     5.701] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event20)
[     5.701] (II) No input driver specified, ignoring this device.
[     5.701] (II) This device may have been added with another device file.
[     5.701] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event21)
[     5.701] (II) No input driver specified, ignoring this device.
[     5.701] (II) This device may have been added with another device file.
[     5.702] (II) config/udev: Adding input device Intel HID events (/dev/input/event8)
[     5.702] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     5.702] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     5.702] (II) Using input driver 'libinput' for 'Intel HID events'
[     5.702] (**) Intel HID events: always reports core events
[     5.702] (**) Option "Device" "/dev/input/event8"
[     5.702] (**) Option "_source" "server/udev"
[     5.702] (II) event8  - Intel HID events: is tagged by udev as: Keyboard
[     5.702] (II) event8  - Intel HID events: device is a keyboard
[     5.702] (II) event8  - Intel HID events: device removed
[     5.711] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input11/event8"
[     5.711] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[     5.711] (II) event8  - Intel HID events: is tagged by udev as: Keyboard
[     5.711] (II) event8  - Intel HID events: device is a keyboard
[     5.712] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
[     5.712] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.712] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.712] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     5.712] (**) Dell WMI hotkeys: always reports core events
[     5.712] (**) Option "Device" "/dev/input/event10"
[     5.712] (**) Option "_source" "server/udev"
[     5.713] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     5.713] (II) event10 - Dell WMI hotkeys: device is a keyboard
[     5.713] (II) event10 - Dell WMI hotkeys: device removed
[     5.731] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14/event10"
[     5.731] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[     5.732] (II) event10 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     5.732] (II) event10 - Dell WMI hotkeys: device is a keyboard
[     5.732] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     5.732] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.732] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     5.732] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     5.732] (**) AT Translated Set 2 keyboard: always reports core events
[     5.732] (**) Option "Device" "/dev/input/event3"
[     5.732] (**) Option "_source" "server/udev"
[     5.733] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.733] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     5.734] (II) event3  - AT Translated Set 2 keyboard: device removed
[     5.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     5.751] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[     5.752] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     5.752] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     5.753] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[     5.753] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     5.753] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     5.753] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     5.753] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     5.753] (**) Option "Device" "/dev/input/event14"
[     5.753] (**) Option "_source" "server/udev"
[     5.753] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     5.754] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad
[     5.754] (II) event14 - SynPS/2 Synaptics TouchPad: device removed
[     5.771] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event14"
[     5.771] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[     5.771] (**) Option "AccelerationScheme" "none"
[     5.771] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     5.771] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     5.771] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     5.772] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     5.772] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad
[     5.773] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     5.773] (II) No input driver specified, ignoring this device.
[     5.773] (II) This device may have been added with another device file.
[     5.773] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[     5.773] (II) No input driver specified, ignoring this device.
[     5.773] (II) This device may have been added with another device file.
[     5.786] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.786] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     5.786] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[     5.786] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[     5.786] (**) Option "Device" "/dev/input/event6"
[     5.786] (**) Option "_source" "_driver/libinput"
[     5.786] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: is a virtual subdevice
[     5.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input7/event6"
[     5.786] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: KEYBOARD, id 19)
[     5.790] (EE) Failed to open authorization file "/var/run/sddm/{da288e1f-9d04-43ce-afcd-b02d063d3a50}": No such file or directory
[     7.329] (II) intel(0): EDID vendor "AUO", prod id 4253
[     7.329] (II) intel(0): Printing DDC gathered Modelines:
[     7.329] (II) intel(0): Modeline "1920x1080"x0.0  143.30  1920 1936 1952 2140  1080 1083 1097 1116 +hsync -vsync (67.0 kHz eP)
[     7.329] (II) intel(0): Modeline "1920x1080"x0.0  114.80  1920 1936 1952 2140  1080 1083 1097 1116 +hsync -vsync (53.6 kHz e)
[ 10958.928] (II) event4  - Logitech Gaming Mouse G502: SYN_DROPPED event - some input events have been lost.

I added the PrimaryGPU option to /etc/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf
and it was working fine, it just stopped working with the latest update.

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    Option "PrimaryGPU" "yes"
    ModulePath "/usr/lib/nvidia/xorg"
    ModulePath "/usr/lib/xorg/modules"
EndSection

Follow me in: Identi.ca, Twitter, Google+

Offline

#4 2020-02-05 19:59:13

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,670

Re: PrimaryGPU not working after Nvidia 440.59

Because the nvidia module isn't loaded at all, post a

pacman -Qs nvidia
dmesg

Online

#5 2020-02-05 20:26:04

kensai
Member
From: Puerto Rico
Registered: 2005-06-03
Posts: 2,484
Website

Re: PrimaryGPU not working after Nvidia 440.59

local/lib32-libvdpau 1.3-1
    Nvidia VDPAU library
local/lib32-nvidia-utils 440.59-1
    NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 440.59-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.3-1
    Nvidia VDPAU library
local/libxnvctrl 440.59-1
    NVIDIA NV-CONTROL X extension
local/nvidia-dkms 440.59-4
    NVIDIA driver sources for linux
local/nvidia-prime 1.0-1
    NVIDIA Prime Render Offload configuration and utilities
local/nvidia-settings 440.59-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 440.59-1
    NVIDIA drivers utilities
local/opencl-nvidia 440.59-1
    OpenCL implemention for NVIDIA

the important bit of dmesg I see something is failing there

[    3.499717] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[    3.516976] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.517038] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.517086] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.517135] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.517181] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.517232] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.517280] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    3.541918] ath10k_pci 0000:3c:00.0: board_file api 2 bmi_id N/A crc32 4ac0889b
[    3.613974] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    3.651026] ath10k_pci 0000:3c:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    3.709548] ath: EEPROM regdomain: 0x69
[    3.709549] ath: EEPROM indicates we should expect a direct regpair map
[    3.709550] ath: Country alpha2 being used: 00
[    3.709550] ath: Regpair used: 0x69
[    3.782496] IPMI message handler: version 39.2
[    3.786685] ipmi device interface
[    3.817988] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    3.818035] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[    3.818075] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[    3.818114] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
[    3.818153] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
[    3.818192] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
[    3.818231] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
[    3.885451] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.885452] Bluetooth: BNEP filters: protocol multicast
[    3.885455] Bluetooth: BNEP socket layer initialized
[    3.890132] NET: Registered protocol family 38
[    4.340400] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    4.546129] nvidia: loading out-of-tree module taints kernel.
[    4.546137] nvidia: module license 'NVIDIA' taints kernel.
[    4.546137] Disabling lock debugging due to kernel taint
[    4.551013] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    4.558401] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[    4.558680] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    4.558777] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    4.636057] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    4.759932] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.59  Thu Jan 30 01:00:41 UTC 2020
[    4.783275] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20191018/nsarguments-59)

Last edited by kensai (2020-02-05 20:27:04)


Follow me in: Identi.ca, Twitter, Google+

Offline

#6 2020-02-05 22:04:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,670

Re: PrimaryGPU not working after Nvidia 440.59

Please post complete logs, there's nothing of relevance failing here and we loose context.

FWIW why do you have nvidia-prime installed? That logically directly conflicts with the desire to set PrimaryGPU (and that package was the reason PrimaryGPU was removed from the package provided config in the first place)

Online

#7 2020-02-05 22:17:45

kensai
Member
From: Puerto Rico
Registered: 2005-06-03
Posts: 2,484
Website

Re: PrimaryGPU not working after Nvidia 440.59

Sorry, I removed nvidia-prime

dmesg 
[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 5.5.2-zen2-1-zen (linux-zen@archlinux) (gcc version 9.2.1 20200130 (Arch Linux 9.2.1+20200130-1)) #1 ZEN SMP PREEMPT Wed, 05 Feb 2020 09:15:04 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=b62dce1e-b65b-4a38-a509-c7066271d958 rw loglevel=3 quiet nvidia-drm.modeset=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005aa82fff] usable
[    0.000000] BIOS-e820: [mem 0x000000005aa83000-0x000000005aa83fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005aa84000-0x000000005aa84fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005aa85000-0x0000000068db0fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000068db1000-0x000000006a021fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006a022000-0x000000006a0a5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006a0a6000-0x000000006a8befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006a8bf000-0x000000006af89fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006af8a000-0x000000006affdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000006affe000-0x000000006affefff] usable
[    0.000000] BIOS-e820: [mem 0x000000006afff000-0x000000006fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000048effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  TPMFinalLog=0x6a88e000  ACPI 2.0=0x6a039000  ACPI=0x6a039000  SMBIOS=0x6aef8000  SMBIOS 3.0=0x6aef7000  MPS=0xfc9f0  ESRT=0x67652418 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Alienware Alienware 17 R4/Alienware 17 R4, BIOS 1.8.0 05/28/2019
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000000] tsc: Detected 2799.927 MHz TSC
[    0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -1410585216 force to 0
[    0.001644] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001646] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001653] last_pfn = 0x48f000 max_arch_pfn = 0x400000000
[    0.001656] MTRR default type: write-back
[    0.001657] MTRR fixed ranges enabled:
[    0.001658]   00000-9FFFF write-back
[    0.001659]   A0000-BFFFF uncachable
[    0.001660]   C0000-FFFFF write-protect
[    0.001660] MTRR variable ranges enabled:
[    0.001662]   0 base 0080000000 mask 7F80000000 uncachable
[    0.001663]   1 base 0070000000 mask 7FF0000000 uncachable
[    0.001663]   2 base 006C000000 mask 7FFC000000 uncachable
[    0.001664]   3 base 006B800000 mask 7FFF800000 uncachable
[    0.001665]   4 disabled
[    0.001665]   5 disabled
[    0.001665]   6 disabled
[    0.001666]   7 disabled
[    0.001666]   8 disabled
[    0.001667]   9 disabled
[    0.002116] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002339] last_pfn = 0x6afff max_arch_pfn = 0x400000000
[    0.009648] found SMP MP-table at [mem 0x000fcc40-0x000fcc4f]
[    0.009659] esrt: Reserving ESRT space from 0x0000000067652418 to 0x0000000067652450.
[    0.009663] e820: update [mem 0x67652000-0x67652fff] usable ==> reserved
[    0.009675] check: Scanning 1 areas for low memory corruption
[    0.009679] Using GB pages for direct mapping
[    0.009680] BRK [0x255001000, 0x255001fff] PGTABLE
[    0.009682] BRK [0x255002000, 0x255002fff] PGTABLE
[    0.009683] BRK [0x255003000, 0x255003fff] PGTABLE
[    0.009714] BRK [0x255004000, 0x255004fff] PGTABLE
[    0.009715] BRK [0x255005000, 0x255005fff] PGTABLE
[    0.009865] BRK [0x255006000, 0x255006fff] PGTABLE
[    0.009904] BRK [0x255007000, 0x255007fff] PGTABLE
[    0.010011] BRK [0x255008000, 0x255008fff] PGTABLE
[    0.010049] BRK [0x255009000, 0x255009fff] PGTABLE
[    0.010096] Secure boot could not be determined
[    0.010096] RAMDISK: [mem 0x34b17000-0x36582fff]
[    0.010112] ACPI: Early table checksum verification disabled
[    0.010114] ACPI: RSDP 0x000000006A039000 000024 (v02 ALWARE)
[    0.010117] ACPI: XSDT 0x000000006A0390C8 00010C (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010121] ACPI: FACP 0x000000006A063A38 000114 (v06 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010126] ACPI: DSDT 0x000000006A039260 02A7D6 (v02 ALWARE ALIENWRE 01072009 INTL 20160422)
[    0.010129] ACPI: FACS 0x000000006A8BE540 000040
[    0.010131] ACPI: APIC 0x000000006A063B50 0000BC (v03 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010133] ACPI: FPDT 0x000000006A063C10 000044 (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010135] ACPI: MCFG 0x000000006A063C58 00003C (v01 ALWARE ALIENWRE 01072009 MSFT 00000097)
[    0.010137] ACPI: SSDT 0x000000006A063C98 000462 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.010140] ACPI: FIDT 0x000000006A064100 00009C (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010142] ACPI: SSDT 0x000000006A0641A0 005604 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.010144] ACPI: BOOT 0x000000006A0697A8 000028 (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010147] ACPI: SLIC 0x000000006A0697D0 000176 (v01 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010149] ACPI: SSDT 0x000000006A069948 003163 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.010151] ACPI: SSDT 0x000000006A06CAB0 0029D5 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.010154] ACPI: HPET 0x000000006A06F488 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.010156] ACPI: SSDT 0x000000006A06F4C0 000939 (v02 INTEL  xh_rvp11 00000000 INTL 20160422)
[    0.010159] ACPI: UEFI 0x000000006A06FE00 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.010161] ACPI: MSDM 0x000000006A06FE48 000055 (v03 ALWARE ALIENWRE 01072009 AMI  00010013)
[    0.010163] ACPI: SSDT 0x000000006A06FEA0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.010165] ACPI: LPIT 0x000000006A070D80 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.010167] ACPI: WSMT 0x000000006A070E18 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.010170] ACPI: SSDT 0x000000006A070E40 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.010172] ACPI: SSDT 0x000000006A0710E0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.010174] ACPI: DBGP 0x000000006A0740E8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.010176] ACPI: DBG2 0x000000006A074120 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.010179] ACPI: SSDT 0x000000006A074178 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160422)
[    0.010181] ACPI: DMAR 0x000000006A074228 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.010183] ACPI: UEFI 0x000000006A0742D0 00063A (v01 INTEL  RstSataE 00000000 ??   00000000)
[    0.010186] ACPI: UEFI 0x000000006A074910 00005C (v01 INTEL  RstSataV 00000000 ??   00000000)
[    0.010188] ACPI: TPM2 0x000000006A074970 000034 (v03 DELL   Tpm2Tabl 00000001 AMI  00000000)
[    0.010190] ACPI: SSDT 0x000000006A0749A8 0064D6 (v01 OptRef OptTabl  00001000 INTL 20160422)
[    0.010197] ACPI: Local APIC address 0xfee00000
[    0.010355] No NUMA configuration found
[    0.010355] Faking a node at [mem 0x0000000000000000-0x000000048effffff]
[    0.010358] NODE_DATA(0) allocated [mem 0x48effc000-0x48effffff]
[    0.010384] Zone ranges:
[    0.010385]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010386]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010386]   Normal   [mem 0x0000000100000000-0x000000048effffff]
[    0.010387]   Device   empty
[    0.010388] Movable zone start for each node
[    0.010389] Early memory node ranges
[    0.010389]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.010390]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.010391]   node   0: [mem 0x0000000000100000-0x000000005aa82fff]
[    0.010392]   node   0: [mem 0x000000005aa85000-0x0000000068db0fff]
[    0.010392]   node   0: [mem 0x000000006affe000-0x000000006affefff]
[    0.010393]   node   0: [mem 0x0000000100000000-0x000000048effffff]
[    0.010758] Zeroed struct page in unavailable ranges: 29363 pages
[    0.010760] Initmem setup node 0 [mem 0x0000000000001000-0x000000048effffff]
[    0.010761] On node 0 totalpages: 4160845
[    0.010762]   DMA zone: 64 pages used for memmap
[    0.010762]   DMA zone: 27 pages reserved
[    0.010763]   DMA zone: 3997 pages, LIFO batch:0
[    0.010811]   DMA32 zone: 6647 pages used for memmap
[    0.010811]   DMA32 zone: 425392 pages, LIFO batch:63
[    0.019584]   Normal zone: 58304 pages used for memmap
[    0.019584]   Normal zone: 3731456 pages, LIFO batch:63
[    0.063610] Reserving Intel graphics memory at [mem 0x6c000000-0x6fffffff]
[    0.063742] ACPI: PM-Timer IO Port: 0x1808
[    0.063744] ACPI: Local APIC address 0xfee00000
[    0.063749] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.063750] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.063750] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.063751] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.063751] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.063752] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.063752] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.063753] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.063790] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.063791] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.063792] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.063794] ACPI: IRQ0 used by override.
[    0.063795] ACPI: IRQ9 used by override.
[    0.063796] Using ACPI (MADT) for SMP configuration information
[    0.063797] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.063800] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.063819] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.063821] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.063822] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.063823] PM: Registered nosave memory: [mem 0x5aa83000-0x5aa83fff]
[    0.063824] PM: Registered nosave memory: [mem 0x5aa84000-0x5aa84fff]
[    0.063825] PM: Registered nosave memory: [mem 0x67652000-0x67652fff]
[    0.063826] PM: Registered nosave memory: [mem 0x68db1000-0x6a021fff]
[    0.063827] PM: Registered nosave memory: [mem 0x6a022000-0x6a0a5fff]
[    0.063827] PM: Registered nosave memory: [mem 0x6a0a6000-0x6a8befff]
[    0.063828] PM: Registered nosave memory: [mem 0x6a8bf000-0x6af89fff]
[    0.063828] PM: Registered nosave memory: [mem 0x6af8a000-0x6affdfff]
[    0.063830] PM: Registered nosave memory: [mem 0x6afff000-0x6fffffff]
[    0.063830] PM: Registered nosave memory: [mem 0x70000000-0xdfffffff]
[    0.063831] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.063831] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.063832] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.063832] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.063833] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.063833] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.063834] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.063834] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.063835] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.063835] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.063836] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.063837] [mem 0x70000000-0xdfffffff] available for PCI devices
[    0.063838] Booting paravirtualized kernel on bare hardware
[    0.063841] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.159433] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.159598] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.159604] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.159605] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.159623] Built 1 zonelists, mobility grouping on.  Total pages: 4095803
[    0.159623] Policy zone: Normal
[    0.159625] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=b62dce1e-b65b-4a38-a509-c7066271d958 rw loglevel=3 quiet nvidia-drm.modeset=1
[    0.160450] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.160830] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.160902] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.192858] Memory: 16128800K/16643380K available (14339K kernel code, 1345K rwdata, 4236K rodata, 1656K init, 3256K bss, 514580K reserved, 0K cma-reserved)
[    0.192958] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.192968] Kernel/User page tables isolation: enabled
[    0.192980] ftrace: allocating 36040 entries in 141 pages
[    0.205624] ftrace: allocated 141 pages with 4 groups
[    0.205716] rcu: Preemptible hierarchical RCU implementation.
[    0.205717] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.205717] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.205718] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.205719]  Tasks RCU enabled.
[    0.205719] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.205720] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.208055] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.208406] random: get_random_bytes called from start_kernel+0x390/0x56b with crng_init=0
[    0.208425] Console: colour dummy device 80x25
[    0.208429] printk: console [tty0] enabled
[    0.208442] ACPI: Core revision 20191018
[    0.208765] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.208842] APIC: Switch to symmetric I/O mode setup
[    0.208844] DMAR: Host address width 39
[    0.208845] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.208849] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.208850] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.208853] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.208854] DMAR: RMRR base: 0x0000006937a000 end: 0x00000069399fff
[    0.208855] DMAR: RMRR base: 0x0000006b800000 end: 0x0000006fffffff
[    0.208857] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.208857] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.208858] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.210351] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.210352] x2apic enabled
[    0.210364] Switched APIC routing to cluster x2apic.
[    0.214517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.218842] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns
[    0.218846] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.85 BogoMIPS (lpj=2799927)
[    0.218848] pid_max: default: 32768 minimum: 301
[    0.221887] LSM: Security Framework initializing
[    0.221890] Yama: becoming mindful.
[    0.221925] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.221947] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.221958] *** VALIDATE tmpfs ***
[    0.222082] *** VALIDATE proc ***
[    0.222123] *** VALIDATE cgroup1 ***
[    0.222124] *** VALIDATE cgroup2 ***
[    0.222170] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.222190] process: using mwait in idle threads
[    0.222193] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.222194] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.222196] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.222197] Spectre V2 : Mitigation: Full generic retpoline
[    0.222197] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.222198] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.222199] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.222199] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.222200] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.222202] MDS: Mitigation: Clear CPU buffers
[    0.222856] Freeing SMP alternatives memory: 40K
[    0.223926] TSC deadline timer enabled
[    0.223931] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.229862] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.229890] ... version:                4
[    0.229890] ... bit width:              48
[    0.229890] ... generic registers:      4
[    0.229891] ... value mask:             0000ffffffffffff
[    0.229892] ... max period:             00007fffffffffff
[    0.229892] ... fixed-purpose events:   3
[    0.229893] ... event mask:             000000070000000f
[    0.231851] rcu: Hierarchical SRCU implementation.
[    0.239026] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.240858] smp: Bringing up secondary CPUs ...
[    0.252892] x86: Booting SMP configuration:
[    0.252893] .... node  #0, CPUs:      #1
[    0.004486] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[    0.266890]  #2 #3 #4
[    0.294310] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.305858]  #5 #6 #7
[    0.330226] smp: Brought up 1 node, 8 CPUs
[    0.330226] smpboot: Max logical packages: 1
[    0.330226] smpboot: Total of 8 processors activated (44798.83 BogoMIPS)
[    0.331189] devtmpfs: initialized
[    0.331189] x86/mm: Memory block size: 128MB
[    0.332772] PM: Registering ACPI NVS region [mem 0x5aa83000-0x5aa83fff] (4096 bytes)
[    0.332772] PM: Registering ACPI NVS region [mem 0x6a0a6000-0x6a8befff] (8491008 bytes)
[    0.332946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.332946] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.332946] pinctrl core: initialized pinctrl subsystem
[    0.333079] PM: RTC time: 22:15:16, date: 2020-02-05
[    0.333083] thermal_sys: Registered thermal governor 'fair_share'
[    0.333084] thermal_sys: Registered thermal governor 'bang_bang'
[    0.333084] thermal_sys: Registered thermal governor 'step_wise'
[    0.333085] thermal_sys: Registered thermal governor 'user_space'
[    0.333085] thermal_sys: Registered thermal governor 'power_allocator'
[    0.333202] NET: Registered protocol family 16
[    0.333276] audit: initializing netlink subsys (disabled)
[    0.333284] audit: type=2000 audit(1580940916.121:1): state=initialized audit_enabled=0 res=1
[    0.334886] cpuidle: using governor ladder
[    0.334888] cpuidle: using governor menu
[    0.334888] Simple Boot Flag at 0x47 set to 0x1
[    0.334888] KVM setup pv remote TLB flush
[    0.334889] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.334890] ACPI: bus type PCI registered
[    0.334891] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.334956] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.334958] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.334969] PCI: Using configuration type 1 for base access
[    0.336016] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.337103] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.337103] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.338932] ACPI: Added _OSI(Module Device)
[    0.338933] ACPI: Added _OSI(Processor Device)
[    0.338934] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.338934] ACPI: Added _OSI(Processor Aggregator Device)
[    0.338935] ACPI: Added _OSI(Linux-Dell-Video)
[    0.338936] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.338937] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.389094] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.392955] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.399715] ACPI: Dynamic OEM Table Load:
[    0.399721] ACPI: SSDT 0xFFFF9D40FC27C000 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.401679] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.403332] ACPI: Dynamic OEM Table Load:
[    0.403336] ACPI: SSDT 0xFFFF9D40FC7AD000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.405574] ACPI: Dynamic OEM Table Load:
[    0.405579] ACPI: SSDT 0xFFFF9D40FC27E000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.407843] ACPI: Dynamic OEM Table Load:
[    0.407849] ACPI: SSDT 0xFFFF9D40FC7CB600 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.413043] ACPI: EC: EC started
[    0.413044] ACPI: EC: interrupt blocked
[    0.413495] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.413497] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x14, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.413498] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.413498] ACPI: Interpreter enabled
[    0.413541] ACPI: (supports S0 S3 S4 S5)
[    0.413542] ACPI: Using IOAPIC for interrupt routing
[    0.413580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.414844] ACPI: Enabled 10 GPEs in block 00 to 7F
[    0.418164] ACPI: Power Resource [PG00] (on)
[    0.437437] ACPI: Power Resource [PG01] (on)
[    0.437948] ACPI: Power Resource [PG02] (on)
[    0.440219] ACPI: Power Resource [WRST] (on)
[    0.440642] ACPI: Power Resource [WRST] (on)
[    0.441069] ACPI: Power Resource [WRST] (on)
[    0.441488] ACPI: Power Resource [WRST] (on)
[    0.441916] ACPI: Power Resource [WRST] (on)
[    0.442340] ACPI: Power Resource [WRST] (on)
[    0.442756] ACPI: Power Resource [WRST] (on)
[    0.443179] ACPI: Power Resource [WRST] (on)
[    0.443599] ACPI: Power Resource [WRST] (on)
[    0.444023] ACPI: Power Resource [WRST] (on)
[    0.444442] ACPI: Power Resource [WRST] (on)
[    0.444867] ACPI: Power Resource [WRST] (on)
[    0.445290] ACPI: Power Resource [WRST] (on)
[    0.445713] ACPI: Power Resource [WRST] (on)
[    0.446136] ACPI: Power Resource [WRST] (on)
[    0.447698] ACPI: Power Resource [WRST] (on)
[    0.448123] ACPI: Power Resource [WRST] (on)
[    0.448540] ACPI: Power Resource [WRST] (on)
[    0.448987] ACPI: Power Resource [WRST] (on)
[    0.449510] ACPI: Power Resource [WRST] (on)
[    0.466440] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.466447] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.466492] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.467451] PCI host bridge to bus 0000:00
[    0.467452] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.467453] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.467454] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.467455] pci_bus 0000:00: root bus resource [mem 0x70000000-0xdfffffff window]
[    0.467456] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.467457] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.467466] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.467886] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.467934] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.468167] pci 0000:00:01.2: [8086:1909] type 01 class 0x060400
[    0.468212] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.468446] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.468456] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.468461] pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
[    0.468465] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.468480] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.468652] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.468663] pci 0000:00:04.0: reg 0x10: [mem 0xdd1a8000-0xdd1affff 64bit]
[    0.468923] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.468943] pci 0000:00:14.0: reg 0x10: [mem 0xdd190000-0xdd19ffff 64bit]
[    0.469013] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.469297] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.469317] pci 0000:00:14.2: reg 0x10: [mem 0xdd1bb000-0xdd1bbfff 64bit]
[    0.469527] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.469551] pci 0000:00:16.0: reg 0x10: [mem 0xdd1ba000-0xdd1bafff 64bit]
[    0.469624] pci 0000:00:16.0: PME# supported from D3hot
[    0.469839] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
[    0.469856] pci 0000:00:17.0: reg 0x10: [mem 0xdd1a0000-0xdd1a7fff]
[    0.469863] pci 0000:00:17.0: reg 0x14: [mem 0xdd1b9000-0xdd1b90ff]
[    0.469869] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.469876] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.469882] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.469888] pci 0000:00:17.0: reg 0x24: [mem 0xdd100000-0xdd17ffff]
[    0.469931] pci 0000:00:17.0: PME# supported from D3hot
[    0.470134] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.470212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.470450] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    0.470533] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.470782] pci 0000:00:1f.0: [8086:a154] type 00 class 0x060100
[    0.471072] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.471085] pci 0000:00:1f.2: reg 0x10: [mem 0xdd1b4000-0xdd1b7fff]
[    0.471305] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.471329] pci 0000:00:1f.3: reg 0x10: [mem 0xdd1b0000-0xdd1b3fff 64bit]
[    0.471352] pci 0000:00:1f.3: reg 0x20: [mem 0xdd180000-0xdd18ffff 64bit]
[    0.471403] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.471671] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.471730] pci 0000:00:1f.4: reg 0x10: [mem 0xdd1b8000-0xdd1b80ff 64bit]
[    0.471799] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.472094] pci 0000:01:00.0: [10de:1ba1] type 00 class 0x030000
[    0.472108] pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
[    0.472116] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.472123] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.472128] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.472132] pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
[    0.472147] pci 0000:01:00.0: Enabling HDA controller
[    0.472202] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.472359] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[    0.472370] pci 0000:01:00.1: reg 0x10: [mem 0xdd080000-0xdd083fff]
[    0.472480] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.472482] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.472484] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.472487] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.472517] pci 0000:00:01.2: PCI bridge to [bus 02-3a]
[    0.472520] pci 0000:00:01.2:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.472523] pci 0000:00:01.2:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.472657] acpiphp: Slot [1] registered
[    0.472665] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[    0.472828] pci 0000:3c:00.0: [168c:003e] type 00 class 0x028000
[    0.472968] pci 0000:3c:00.0: reg 0x10: [mem 0xdd200000-0xdd3fffff 64bit]
[    0.473576] pci 0000:3c:00.0: PME# supported from D0 D3hot D3cold
[    0.474252] pci 0000:00:1c.5: PCI bridge to [bus 3c]
[    0.474256] pci 0000:00:1c.5:   bridge window [mem 0xdd200000-0xdd3fffff]
[    0.478978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479064] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.479148] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479315] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479394] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479477] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.479560] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.480264] ACPI: EC: interrupt unblocked
[    0.480264] ACPI: EC: event unblocked
[    0.480264] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x14, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.480264] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.480264] iommu: Default domain type: Translated 
[    0.480264] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.480264] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.480264] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.480264] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.480264] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.480264] vgaarb: loaded
[    0.480264] ACPI: bus type USB registered
[    0.480264] usbcore: registered new interface driver usbfs
[    0.480264] usbcore: registered new interface driver hub
[    0.480266] usbcore: registered new device driver usb
[    0.480266] pps_core: LinuxPPS API ver. 1 registered
[    0.480266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.480266] PTP clock support registered
[    0.480266] EDAC MC: Ver: 3.0.0
[    0.480266] Registered efivars operations
[    0.480266] PCI: Using ACPI for IRQ routing
[    0.502249] PCI: pci_cache_line_size set to 64 bytes
[    0.502393] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.502394] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.502395] e820: reserve RAM buffer [mem 0x5aa83000-0x5bffffff]
[    0.502396] e820: reserve RAM buffer [mem 0x67652000-0x67ffffff]
[    0.502396] e820: reserve RAM buffer [mem 0x68db1000-0x6bffffff]
[    0.502397] e820: reserve RAM buffer [mem 0x6afff000-0x6bffffff]
[    0.502398] e820: reserve RAM buffer [mem 0x48f000000-0x48fffffff]
[    0.502478] NetLabel: Initializing
[    0.502478] NetLabel:  domain hash size = 128
[    0.502479] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.502489] NetLabel:  unlabeled traffic allowed by default
[    0.503184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.503184] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.505883] clocksource: Switched to clocksource tsc-early
[    0.515723] *** VALIDATE bpf ***
[    0.515797] VFS: Disk quotas dquot_6.6.0
[    0.515809] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.515831] *** VALIDATE ramfs ***
[    0.515834] *** VALIDATE hugetlbfs ***
[    0.515873] pnp: PnP ACPI init
[    0.516216] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.516217] system 00:00: [io  0xffff] has been reserved
[    0.516218] system 00:00: [io  0xffff] has been reserved
[    0.516219] system 00:00: [io  0xffff] has been reserved
[    0.516220] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.516221] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.516226] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.516329] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.516332] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.516349] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.516388] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.516390] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.517940] pnp 00:04: Plug and Play ACPI device, IDs DLL0773 PNP0f03 (active)
[    0.517961] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.518235] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.518236] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.518237] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.518238] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.518239] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.518240] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.518241] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.518243] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.518244] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.518245] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.518248] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.518292] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.518293] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.518294] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.518296] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.518297] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.518298] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.518299] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.518301] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.518654] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.518657] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.520097] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.520098] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.520099] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.520102] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.521378] pnp: PnP ACPI: found 10 devices
[    0.526909] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.526939] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 3b] add_size 1000
[    0.526941] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b] add_size 200000 add_align 100000
[    0.526943] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3b] add_size 200000 add_align 100000
[    0.526948] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa2000000-0xa21fffff]
[    0.526952] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa2200000-0xa23fffff 64bit pref]
[    0.526954] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.526956] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.526958] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.526960] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
[    0.526962] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.526965] pci 0000:00:01.2: PCI bridge to [bus 02-3a]
[    0.526967] pci 0000:00:01.2:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.526969] pci 0000:00:01.2:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.526972] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[    0.526984] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.526987] pci 0000:00:1c.0:   bridge window [mem 0xa2000000-0xa21fffff]
[    0.526989] pci 0000:00:1c.0:   bridge window [mem 0xa2200000-0xa23fffff 64bit pref]
[    0.526993] pci 0000:00:1c.5: PCI bridge to [bus 3c]
[    0.526996] pci 0000:00:1c.5:   bridge window [mem 0xdd200000-0xdd3fffff]
[    0.527002] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.527003] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.527004] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.527005] pci_bus 0000:00: resource 7 [mem 0x70000000-0xdfffffff window]
[    0.527006] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.527007] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.527007] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[    0.527008] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.527009] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.527010] pci_bus 0000:02: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
[    0.527011] pci_bus 0000:3b: resource 0 [io  0x2000-0x2fff]
[    0.527012] pci_bus 0000:3b: resource 1 [mem 0xa2000000-0xa21fffff]
[    0.527013] pci_bus 0000:3b: resource 2 [mem 0xa2200000-0xa23fffff 64bit pref]
[    0.527014] pci_bus 0000:3c: resource 1 [mem 0xdd200000-0xdd3fffff]
[    0.527205] NET: Registered protocol family 2
[    0.527319] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.527396] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.527552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.527617] TCP: Hash tables configured (established 131072 bind 65536)
[    0.527652] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.527690] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.527768] NET: Registered protocol family 1
[    0.527772] NET: Registered protocol family 44
[    0.527783] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.528118] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.528202] PCI: CLS 64 bytes, default 64
[    0.528237] Trying to unpack rootfs image as initramfs...
[    0.788589] Freeing initrd memory: 27056K
[    0.798894] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.798896] software IO TLB: mapped [mem 0x60329000-0x64329000] (64MB)
[    0.799048] check: Scanning for low memory corruption every 60 seconds
[    0.799366] Initialise system trusted keyrings
[    0.799373] Key type blacklist registered
[    0.799407] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.800416] zbud: loaded
[    0.804460] Key type asymmetric registered
[    0.804461] Asymmetric key parser 'x509' registered
[    0.804469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.804503] io scheduler mq-deadline registered
[    0.804503] io scheduler kyber registered
[    0.804525] io scheduler bfq registered
[    0.805451] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.805520] efifb: probing for efifb
[    0.805531] efifb: No BGRT, not showing boot graphics
[    0.805532] efifb: framebuffer at 0x70000000, using 8128k, total 8128k
[    0.805532] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.805533] efifb: scrolling: redraw
[    0.805534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.805566] fbcon: Deferring console take-over
[    0.805567] fb0: EFI VGA frame buffer device
[    0.805573] intel_idle: MWAIT substates: 0x11142120
[    0.805573] intel_idle: v0.4.1 model 0x9E
[    0.805939] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.805999] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
[    0.806015] ACPI: Lid Switch [LID0]
[    0.806075] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.806112] ACPI: Power Button [PWRB]
[    0.806150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.806179] ACPI: Power Button [PWRF]
[    0.806724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.807341] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.807342] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.808104] usbcore: registered new interface driver usbserial_generic
[    0.808106] usbserial: USB Serial support registered for generic
[    0.808131] rtc_cmos 00:02: RTC can wake from S4
[    0.808623] rtc_cmos 00:02: registered as rtc0
[    0.808633] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.808684] intel_pstate: Intel P-state driver initializing
[    0.808725] intel_pstate: Disabling energy efficiency optimization
[    0.809196] intel_pstate: HWP enabled
[    0.809322] ledtrig-cpu: registered to indicate activity on CPUs
[    0.809353] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[    0.809356] caller pmc_core_probe+0x85/0x2e0 mapping multiple BARs
[    0.809374] intel_pmc_core INT33A1:00:  initialized
[    0.809418] drop_monitor: Initializing network drop monitor service
[    0.809525] NET: Registered protocol family 10
[    0.815406] Segment Routing with IPv6
[    0.815420] NET: Registered protocol family 17
[    0.815900] RAS: Correctable Errors collector initialized.
[    0.815926] microcode: sig=0x906e9, pf=0x20, revision=0xca
[    0.816143] microcode: Microcode Update Driver: v2.2.
[    0.816146] IPI shorthand broadcast: enabled
[    0.816151] sched_clock: Marking stable (812654134, 3486816)->(822830665, -6689715)
[    0.816382] registered taskstats version 1
[    0.816389] Loading compiled-in X.509 certificates
[    0.819450] Loaded X.509 cert 'Build time autogenerated kernel key: ecf6dca96577357227bd46166b80d7b62eb4014b'
[    0.819673] zswap: loaded using pool lz4/z3fold
[    0.819711] Key type ._fscrypt registered
[    0.819712] Key type .fscrypt registered
[    0.824984] Key type big_key registered
[    0.826013] PM:   Magic number: 8:404:299
[    0.826015] PM:   hash matches drivers/base/power/main.c:936
[    0.826224] rtc_cmos 00:02: setting system clock to 2020-02-05T22:15:17 UTC (1580940917)
[    0.826976] Freeing unused decrypted memory: 2040K
[    0.827253] Freeing unused kernel image (initmem) memory: 1656K
[    0.836952] Write protecting the kernel read-only data: 22528k
[    0.837536] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.837761] Freeing unused kernel image (rodata/data gap) memory: 1908K
[    0.844339] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.844340] x86/mm: Checking user space page tables
[    0.850808] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.850812] CFS CPU scheduler.
[    0.850813] Run /init as init process
[    0.943182] fbcon: Taking over console
[    0.943228] Console: switching to colour frame buffer device 240x67
[    0.998797] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.019738] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.019784] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.020375] SCSI subsystem initialized
[    1.021177] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.021181] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.022267] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.022271] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.022433] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.022434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022435] usb usb1: Product: xHCI Host Controller
[    1.022436] usb usb1: Manufacturer: Linux 5.5.2-zen2-1-zen xhci-hcd
[    1.022437] usb usb1: SerialNumber: 0000:00:14.0
[    1.022529] hub 1-0:1.0: USB hub found
[    1.022554] hub 1-0:1.0: 16 ports detected
[    1.023819] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.023821] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.023823] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.023876] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.023877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.023878] usb usb2: Product: xHCI Host Controller
[    1.023879] usb usb2: Manufacturer: Linux 5.5.2-zen2-1-zen xhci-hcd
[    1.023879] usb usb2: SerialNumber: 0000:00:14.0
[    1.024058] hub 2-0:1.0: USB hub found
[    1.024080] hub 2-0:1.0: 10 ports detected
[    1.024427] usb: port power management may be unreliable
[    1.026936] libata version 3.00 loaded.
[    1.029294] ahci 0000:00:17.0: version 3.0
[    1.029446] ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
[    1.031644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.039879] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xd impl RAID mode
[    1.039881] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.040473] scsi host0: ahci
[    1.040649] scsi host1: ahci
[    1.040717] scsi host2: ahci
[    1.040786] scsi host3: ahci
[    1.040827] ata1: SATA max UDMA/133 abar m524288@0xdd100000 port 0xdd100100 irq 127
[    1.040828] ata2: DUMMY
[    1.040829] ata3: SATA max UDMA/133 abar m524288@0xdd100000 port 0xdd100200 irq 127
[    1.040830] ata4: SATA max UDMA/133 abar m524288@0xdd100000 port 0xdd100280 irq 127
[    1.342010] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.346892] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.349466] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.349473] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.349477] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.350877] ata1.00: ATA-9: SanDisk X400 M.2 2280 128GB, X4130012, max UDMA/133
[    1.350883] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.353999] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.354006] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.354010] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.354892] ata3: SATA link down (SStatus 4 SControl 300)
[    1.354932] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.355967] ata1.00: configured for UDMA/133
[    1.356340] scsi 0:0:0:0: Direct-Access     ATA      SanDisk X400 M.2 0012 PQ: 0 ANSI: 5
[    1.358884] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.358891] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.358896] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.359266] ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.360819] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3W0, max UDMA/133
[    1.360825] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.364794] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.364800] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.364805] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.365087] ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.366575] ata4.00: configured for UDMA/133
[    1.366831] scsi 3:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3W0 PQ: 0 ANSI: 5
[    1.376998] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.377004] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.377008] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.377034] sd 3:0:0:0: [sdb] Write Protect is off
[    1.377040] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.377042] sd 0:0:0:0: [sda] Write Protect is off
[    1.377050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.377087] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.377100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.392274]  sda: sda1 sda2 sda3
[    1.393453] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.454417]  sdb: sdb1
[    1.455894] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.470424] usb 1-1: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
[    1.470430] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.470434] usb 1-1: Product: Gaming Mouse G502
[    1.470437] usb 1-1: Manufacturer: Logitech
[    1.470440] usb 1-1: SerialNumber: 167938723234
[    1.481948] hid: raw HID events driver (C) Jiri Kosina
[    1.490080] usbcore: registered new interface driver usbhid
[    1.490082] usbhid: USB HID core driver
[    1.494621] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C332.0001/input/input5
[    1.494726] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-1/input0
[    1.495308] input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input6
[    1.547085] input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input7
[    1.547154] input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C332.0002/input/input8
[    1.547562] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-1/input1
[    1.585927] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.700521] random: fast init done
[    1.712778] usb 1-4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[    1.713682] usb 1-4: New USB device found, idVendor=187c, idProduct=0530, bcdDevice= 0.00
[    1.713689] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.713694] usb 1-4: Product: AW1517
[    1.713699] usb 1-4: Manufacturer: Alienware
[    1.713704] usb 1-4: SerialNumber: 03.00
[    1.716417] hid-generic 0003:187C:0530.0003: hiddev1,hidraw2: USB HID v1.01 Device [Alienware AW1517] on usb-0000:00:14.0-4/input0
[    1.781138] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.829913] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[    1.844873] tsc: Refined TSC clocksource calibration: 2807.973 MHz
[    1.844881] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879acbdc43, max_idle_ns: 440795260375 ns
[    1.844923] clocksource: Switched to clocksource tsc
[    1.957260] usb 1-5: New USB device found, idVendor=0cf3, idProduct=e301, bcdDevice= 0.01
[    1.957263] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.959857] systemd[1]: systemd 244.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.972093] systemd[1]: Detected architecture x86-64.
[    1.994331] systemd[1]: Set hostname to <alien>.
[    1.996522] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
[    2.072899] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[    2.179907] usb 1-7: New USB device found, idVendor=0bda, idProduct=58c2, bcdDevice=62.02
[    2.179909] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.179911] usb 1-7: Product: Integrated_Webcam_HD
[    2.179913] usb 1-7: Manufacturer: CN0JCXG0724876CNB1KXA00
[    2.179914] usb 1-7: SerialNumber: 200901010001
[    2.197251] systemd[1]: Created slice system-getty.slice.
[    2.197501] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.197693] systemd[1]: Created slice User and Session Slice.
[    2.197762] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.197811] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.198087] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.198119] systemd[1]: Reached target Local Encrypted Volumes.
[    2.198128] systemd[1]: Reached target Login Prompts.
[    2.198145] systemd[1]: Reached target Paths.
[    2.198154] systemd[1]: Reached target Remote File Systems.
[    2.198162] systemd[1]: Reached target Slices.
[    2.198240] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.198606] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.198893] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.200680] systemd[1]: Listening on Process Core Dump Socket.
[    2.200736] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.200906] systemd[1]: Listening on Journal Audit Socket.
[    2.200996] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.201098] systemd[1]: Listening on Journal Socket.
[    2.201191] systemd[1]: Listening on udev Control Socket.
[    2.201257] systemd[1]: Listening on udev Kernel Socket.
[    2.202674] systemd[1]: Mounting Huge Pages File System...
[    2.204087] systemd[1]: Mounting POSIX Message Queue File System...
[    2.205516] systemd[1]: Mounting Kernel Debug File System...
[    2.206862] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.208007] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    2.210223] systemd[1]: Starting Set Up Additional Binary Formats...
[    2.210252] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.212062] systemd[1]: Starting Journal Service...
[    2.214191] systemd[1]: Starting Load Kernel Modules...
[    2.215325] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.216433] systemd[1]: Starting udev Coldplug all Devices...
[    2.217187] systemd[1]: Mounted Huge Pages File System.
[    2.217278] systemd[1]: Mounted POSIX Message Queue File System.
[    2.217356] systemd[1]: Mounted Kernel Debug File System.
[    2.217688] systemd[1]: Started Create list of static device nodes for the current kernel.
[    2.217805] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 319 (systemd-binfmt)
[    2.219048] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    2.220164] random: lvm: uninitialized urandom read (4 bytes read)
[    2.221339] EXT4-fs (sda3): re-mounted. Opts: (null)
[    2.222062] systemd[1]: Started Remount Root and Kernel File Systems.
[    2.222217] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    2.222311] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    2.224588] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.225589] systemd[1]: Starting Load/Save Random Seed...
[    2.227005] systemd[1]: Starting Create System Users...
[    2.227579] systemd[1]: Started Set Up Additional Binary Formats.
[    2.228286] Asymmetric key parser 'pkcs8' registered
[    2.229005] systemd[1]: Started LVM2 metadata daemon.
[    2.229996] systemd[1]: Started Load Kernel Modules.
[    2.230236] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.231328] systemd[1]: Mounting Kernel Configuration File System...
[    2.232543] systemd[1]: Starting Apply Kernel Variables...
[    2.233603] systemd[1]: Mounted Kernel Configuration File System.
[    2.240452] systemd[1]: Started Apply Kernel Variables.
[    2.243197] systemd[1]: Started Create System Users.
[    2.244247] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.258476] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.259647] systemd[1]: Starting udev Kernel Device Manager...
[    2.282062] systemd[1]: Started udev Coldplug all Devices.
[    2.420220] systemd[1]: Started Journal Service.
[    2.420287] audit: type=1130 audit(1580940919.092:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.426442] systemd-journald[320]: Received client request to flush runtime journal.
[    2.521374] audit: type=1130 audit(1580940919.193:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.558034] audit: type=1130 audit(1580940919.230:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.567101] input: Intel HID events as /devices/platform/INT33D5:00/input/input11
[    2.575105] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    2.591647] ACPI: AC Adapter [ACAD] (on-line)
[    2.605927] battery: ACPI: Battery Slot [BAT1] (battery present)
[    2.619957] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    2.619966] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    2.636657] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.636692] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.639038] input: PC Speaker as /devices/platform/pcspkr/input/input12
[    2.669641] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.669642] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.669643] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.669643] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.669643] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.669644] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.673215] Linux agpgart interface v0.103
[    2.673273] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.674344] intel_rapl_common: Found RAPL domain package
[    2.674345] intel_rapl_common: Found RAPL domain dram
[    2.674417] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    2.721432] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.728442] Adding 524284k swap on /dev/sda2.  Priority:-2 extents:1 across:524284k SSFS
[    2.752750] mc: Linux media interface: v0.10
[    2.756492] cryptd: max_cpu_qlen set to 1000
[    2.757495] mousedev: PS/2 mouse device common for all mice
[    2.784599] AVX2 version of gcm_enc/dec engaged.
[    2.784600] AES CTR mode by8 optimization enabled
[    2.827485] videodev: Linux video capture interface: v2.00
[    2.860406] iTCO_vendor_support: vendor-support=0
[    2.860562] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.865103] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.870046] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[    2.870300] intel_rapl_common: Found RAPL domain package
[    2.870302] intel_rapl_common: Found RAPL domain core
[    2.870303] intel_rapl_common: Found RAPL domain uncore
[    2.870304] intel_rapl_common: Found RAPL domain dram
[    2.933987] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.934017] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.934019] cfg80211: failed to load regulatory.db
[    2.934121] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.940913] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.945421] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.947984] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.947990] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.951171] random: crng init done
[    2.951917] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[    2.955970] audit: type=1130 audit(1580940919.628:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.958368] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[    2.968110] Bluetooth: Core ver 2.22
[    2.968123] NET: Registered protocol family 31
[    2.968123] Bluetooth: HCI device and connection manager initialized
[    2.968126] Bluetooth: HCI socket layer initialized
[    2.968128] Bluetooth: L2CAP socket layer initialized
[    2.968131] Bluetooth: SCO socket layer initialized
[    2.972867] audit: type=1130 audit(1580940919.643:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.009488] psmouse serio1: synaptics: queried max coordinates: x [..5668], y [..4756]
[    3.020317] audit: type=1130 audit(1580940919.692:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-8235\x2dCD6E comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.024719] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58c2)
[    3.025322] checking generic (70000000 7f0000) vs hw (db000000 1000000)
[    3.025323] checking generic (70000000 7f0000) vs hw (70000000 10000000)
[    3.025324] fb0: switching to inteldrmfb from EFI VGA
[    3.025882] Console: switching to colour dummy device 80x25
[    3.026263] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.027829] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.027830] [drm] Driver supports precise vblank timestamp query.
[    3.028482] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    3.029818] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.031036] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.036042] psmouse serio1: synaptics: queried min coordinates: x [1274..], y [1098..]
[    3.036047] psmouse serio1: synaptics: Your touchpad (PNP: DLL0773 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    3.042392] [drm] Initialized i915 1.6.0 20191101 for 0000:00:02.0 on minor 0
[    3.045677] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.047604] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[    3.047607] uvcvideo 1-7:1.0: Entity type for entity Extension 7 was not initialized!
[    3.047608] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[    3.047614] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[    3.047674] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input15
[    3.047734] usbcore: registered new interface driver uvcvideo
[    3.047735] USB Video Class driver (1.1.1)
[    3.050152] usbcore: registered new interface driver btusb
[    3.057561] audit: type=1130 audit(1580940919.729:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.058250] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[    3.059118] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.059214] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.061108] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input17
[    3.066155] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.078355] fbcon: i915drmfb (fb0) is primary device
[    3.087821] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2417, fw id: 1365292
[    3.091013] Console: switching to colour frame buffer device 240x67
[    3.105043] audit: type=1130 audit(1580940919.777:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-75f43caf\x2d0a53\x2d4bb4\x2d93fa\x2d05e978a132ee comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.111012] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.121761] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[    3.126956] ath10k_pci 0000:3c:00.0: enabling device (0000 -> 0002)
[    3.128209] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.128470] ath10k_pci 0000:3c:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    3.141944] audit: type=1130 audit(1580940919.814:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.156260] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.156263] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.156264] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.156265] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.156266] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.156268] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    3.156269] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    3.156270] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.207601] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.207675] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.207722] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.208599] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.208651] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.208698] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.208755] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    3.336743] ath10k_pci 0000:3c:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    3.336745] ath10k_pci 0000:3c:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[    3.337163] ath10k_pci 0000:3c:00.0: firmware ver WLAN.RM.4.4.1-00140-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 29eb8ca1
[    3.402302] IPMI message handler: version 39.2
[    3.402575] ath10k_pci 0000:3c:00.0: board_file api 2 bmi_id N/A crc32 4ac0889b
[    3.403907] ipmi device interface
[    3.434303] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.434304] Bluetooth: BNEP filters: protocol multicast
[    3.434308] Bluetooth: BNEP socket layer initialized
[    3.439050] NET: Registered protocol family 38
[    3.474526] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    3.493975] ath10k_pci 0000:3c:00.0: htt-ver 3.60 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    3.552031] ath: EEPROM regdomain: 0x69
[    3.552032] ath: EEPROM indicates we should expect a direct regpair map
[    3.552033] ath: Country alpha2 being used: 00
[    3.552034] ath: Regpair used: 0x69
[    3.974163] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    4.193984] nvidia: loading out-of-tree module taints kernel.
[    4.193992] nvidia: module license 'NVIDIA' taints kernel.
[    4.193992] Disabling lock debugging due to kernel taint
[    4.198843] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    4.206278] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[    4.206600] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    4.206708] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    4.277189] ath10k_pci 0000:3c:00.0: unsupported HTC service id: 1536
[    4.405965] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.59  Thu Jan 30 01:00:41 UTC 2020
[    4.429262] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20191018/nsarguments-59)
[    4.561369] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    4.561403] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[    4.561432] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[    4.561459] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
[    4.561489] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
[    4.561522] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
[    4.561548] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
[    5.475765] kauditd_printk_skb: 18 callbacks suppressed
[    5.475766] audit: type=1100 audit(1580940922.147:29): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_permit acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[    5.475788] audit: type=1101 audit(1580940922.147:30): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_permit acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[    5.476675] audit: type=1103 audit(1580940922.148:31): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[    5.489372] audit: type=1130 audit(1580940922.161:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.499308] audit: type=1101 audit(1580940922.171:33): pid=641 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="sddm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.499362] audit: type=1006 audit(1580940922.171:34): pid=641 uid=0 old-auid=4294967295 auid=976 tty=(none) old-ses=4294967295 ses=1 res=1
[    5.501506] audit: type=1105 audit(1580940922.173:35): pid=641 uid=0 auid=976 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="sddm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.555027] audit: type=1130 audit(1580940922.227:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.559020] audit: type=1105 audit(1580940922.231:37): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix,pam_systemd acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=:0 res=success'
[    5.889052] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.59  Thu Jan 30 00:59:18 UTC 2020
[    5.913818] audit: type=1130 audit(1580940922.585:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nvidia-persistenced comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.567945] kauditd_printk_skb: 5 callbacks suppressed
[   11.567945] audit: type=1100 audit(1580940928.240:44): pid=675 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="kensai" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   11.570039] audit: type=1101 audit(1580940928.242:45): pid=675 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="kensai" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   11.570623] audit: type=1103 audit(1580940928.242:46): pid=675 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="kensai" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=? res=success'
[   11.570762] audit: type=1006 audit(1580940928.242:47): pid=675 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   11.586150] audit: type=1130 audit(1580940928.258:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.591394] audit: type=1101 audit(1580940928.263:49): pid=679 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="kensai" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.591397] audit: type=1006 audit(1580940928.263:50): pid=679 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   11.592489] audit: type=1105 audit(1580940928.264:51): pid=679 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="kensai" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.592924] audit: type=1106 audit(1580940928.265:52): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=:0 res=success'
[   11.592992] audit: type=1104 audit(1580940928.265:53): pid=638 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit acct="sddm" exe="/usr/lib/sddm/sddm-helper" hostname=? addr=? terminal=:0 res=success'
[   17.865874] Bluetooth: RFCOMM TTY layer initialized
[   17.865879] Bluetooth: RFCOMM socket layer initialized
[   17.865884] Bluetooth: RFCOMM ver 1.11
[   21.836380] kauditd_printk_skb: 7 callbacks suppressed
[   21.836381] audit: type=1131 audit(1580940938.508:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.845253] audit: type=1131 audit(1580940938.517:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.347880] wlan0: authenticate with 8c:3b:ad:59:c7:11
[   25.377549] wlan0: send auth to 8c:3b:ad:59:c7:11 (try 1/3)
[   25.379029] wlan0: authenticated
[   25.379883] wlan0: associate with 8c:3b:ad:59:c7:11 (try 1/3)
[   25.382840] wlan0: RX AssocResp from 8c:3b:ad:59:c7:11 (capab=0x431 status=0 aid=3)
[   25.385516] wlan0: associated
[   25.432012] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.460861] audit: type=1130 audit(1580940942.132:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.740123] audit: type=1131 audit(1580940950.412:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   36.018415] audit: type=1131 audit(1580940952.212:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Last edited by kensai (2020-02-05 22:19:01)


Follow me in: Identi.ca, Twitter, Google+

Offline

#8 2020-02-06 08:37:40

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,670

Re: PrimaryGPU not working after Nvidia 440.59

Hmm nothing obviously going wrong here,

pacman -Qkk nvidia-utils
ls -l /etc/X11/ /etc/X11/xorg.conf.d /usr/share/X11/xorg.conf.d

Does the intel driver have any intentional relevance to you? You could remove it and/or opt for a more explicit configuration by following https://wiki.archlinux.org/index.php/NV … phics_only

Online

#9 2020-02-06 14:01:04

kensai
Member
From: Puerto Rico
Registered: 2005-06-03
Posts: 2,484
Website

Re: PrimaryGPU not working after Nvidia 440.59

nvidia-utils: 178 total files, 0 altered files
/etc/X11/:
total 8
drwxr-xr-x 3 root root 4096 Dec 30 13:59 xinit
drwxr-xr-x 2 root root 4096 Feb  6 09:56 xorg.conf.d

/etc/X11/xorg.conf.d:
total 16
-rw-r--r-- 1 root root  362 Feb  6 09:50 10-nvidia-drm-outputclass.conf
-rw-r--r-- 1 root root 1350 Feb  5 10:22 10-quirks.conf
-rw-r--r-- 1 root root   93 Feb  5 10:25 20-nvidia-prime.conf
-rw-r--r-- 1 root root 1429 Feb  4 10:31 40-libinput.conf

/usr/share/X11/xorg.conf.d:
total 16
-rw-r--r-- 1 root root  227 Feb  4 04:08 10-nvidia-drm-outputclass.conf
-rw-r--r-- 1 root root 1350 Jan 14 03:13 10-quirks.conf
-rw-r--r-- 1 root root   93 Dec 10 14:53 20-nvidia-prime.conf
-rw-r--r-- 1 root root 1429 Aug 12 14:26 40-libinput.conf

Thanks a lot, I'm still trying to find out whats wrong on my own and have come up with nothing, everything was working with 440.44 and 440.48 it was just with 440.59 that without changing anything it does not want to use my nvidia card.


Follow me in: Identi.ca, Twitter, Google+

Offline

#10 2020-02-06 22:39:22

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,670

Re: PrimaryGPU not working after Nvidia 440.59

Why do you replicate all of these in your /etc/X11/xorg.conf.d ? Why is there still a 20-nvidia-prime config and which kinds of configurations does it set?  The only file that should be in your /etc/X11/xorg.conf.d is 10-nvidia-drm-outputclass.conf with the content you posted earlier and 20-nvidia-prime.conf should not exist at either location.

If PrimaryGPU in general was a problem with this driver, we  would see a similar fallout like in https://bbs.archlinux.org/viewtopic.php?id=251846 we don't so this seems isolated to your system and there are more than a few pointers to misconfiguration.

FWIW general sanity checks

glxinfo -B
printenv
xrandr -q
xrandr --listproviders

Online

Board footer

Powered by FluxBB