You are not logged in.

#1 2020-02-05 18:25:14

Overlord
Member
Registered: 2019-11-07
Posts: 4

No WiFi after upgrade

Upon completing full upgrade, no access to wireless NIC.
It's not listed in "ip link" output, but shown with lspci.
The card is Intel Wireless-AC 3168NGW
The kernel now is 5.5.2, should I revert to older one ?

Offline

#2 2020-02-05 18:34:08

loqs
Member
Registered: 2014-03-06
Posts: 17,977

Re: No WiFi after upgrade

https://bugs.archlinux.org/task/65359 should be fixed in 5.5.2.arch2-1 currently in testing.

Offline

#3 2020-02-06 06:36:41

glenb77
Member
Registered: 2014-10-02
Posts: 68

Re: No WiFi after upgrade

the fix in 5.5.2 testing made matters worse for me on this wifi card. i got a loop at boot from iwlwifi and had to force power off. still can only use last kernel from 5.4 series.

Offline

#4 2020-02-06 12:49:04

loqs
Member
Registered: 2014-03-06
Posts: 17,977

Re: No WiFi after upgrade

@glenb77 can you report that on https://bugs.archlinux.org/task/65359 please include the kernel messages extracted from the journal for the boot with the loop.

Offline

#5 2020-02-08 16:02:26

glenb77
Member
Registered: 2014-10-02
Posts: 68

Re: No WiFi after upgrade

reported issue and linked video of the looping. the patch apparently fixes most of the 3168 cards, but not the ones sold in the walmart/motile machines. this is documented in this thread which is the same as problem i am seeing with mine. 

https://forums.gentoo.org/viewtopic-p-8 … 3abfdaccde

from what i can tell there are 4 firmware files that are available that will work with the driver, i tried all 4 and they all fail, including latest which is 29. if i blacklist the module to let the computer boot and then insert/modprobe the driver, it will load and show in modules, but when i try to set the driver to 'up' condition i get input/output error.

Offline

#6 2020-02-09 03:08:26

Zhme
Member
Registered: 2017-06-11
Posts: 80

Re: No WiFi after upgrade

Same issue when updating to kernel 5.5.2

Rolled back to 5.4.15 for now

Issue appears to be with iwlwifi

Feb 08 07:53:49 top kernel: iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
Feb 08 07:53:49 top kernel: iwlwifi 0000:02:00.0: loaded firmware version 29.163394017.0 op_mode iwlmvm
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Can't parse phy_sku in B0, empty sections
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Failed to read NVM: -61
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Collecting data: trigger 16 fired.
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Start IWL Error Log Dump:
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Status: 0x00000040, count: 6
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Loaded firmware version: 29.163394017.0
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN       
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x000002F0 | trm_hw_status0
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | trm_hw_status1
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x0004171E | branchlink2
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x000446B2 | interruptlink1
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000656 | interruptlink2
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | data1
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000080 | data2
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x07030000 | data3
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | beacon time
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00001D14 | tsf low
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | tsf hi
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | time gp1
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00001D15 | time gp2
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000009 | uCode revision type
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x0000001D | uCode version major
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x09BD31E1 | uCode version minor
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000220 | hw version
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00C89200 | board version
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00110188 | hcmd
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00022000 | isr0
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | isr1
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000002 | isr2
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x004000C0 | isr3
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | isr4
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00110188 | last cmd Id
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | wait_event
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x000000D4 | l2p_control
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | l2p_duration
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | l2p_mhvalid
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | l2p_addr_match
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000007 | lmpm_pmg_sel
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x07100855 | timestamp
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00341018 | flow_handler
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Fseq Registers:
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_ERROR_CODE
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_TOP_INIT_VERSION
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVIO_INIT_VERSION
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_OTP_VERSION
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_TOP_CONTENT_VERSION
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_ALIVE_TOKEN
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVI_ID
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVR_ID
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | CNVI_AUX_MISC_CHIP
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | CNVR_AUX_MISC_CHIP
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: 0x00000000 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Firmware not running - cannot dump error
Feb 08 07:53:50 top kernel: iwlwifi 0000:02:00.0: Failed to run INIT ucode: -61

Is the patch posted on the Gentoo forums the only available fix for the time being?

Offline

#7 2020-02-11 02:13:03

glenb77
Member
Registered: 2014-10-02
Posts: 68

Re: No WiFi after upgrade

i was able to get mine working using the two patches referenced in https://bugs.archlinux.org/task/65359. this on a walmart/motile laptop with 3168ngw

Offline

#8 2020-02-12 14:52:09

misty
Member
Registered: 2019-01-18
Posts: 5

Re: No WiFi after upgrade

Same issue when updating to kernel 5.5.3

Offline

#9 2020-02-12 15:04:53

loqs
Member
Registered: 2014-03-06
Posts: 17,977

Re: No WiFi after upgrade

@misty if you apply the patch from https://bugzilla.kernel.org/show_bug.cgi?id=206479#c4 to 5.5.3.arch1-1 is the issue resolved?

Offline

#10 2020-02-12 15:09:29

misty
Member
Registered: 2019-01-18
Posts: 5

Re: No WiFi after upgrade

loqs wrote:

@misty if you apply the patch from https://bugzilla.kernel.org/show_bug.cgi?id=206479#c4 to 5.5.3.arch1-1 is the issue resolved?

I'm sorry. I think the issue I have is not the same, my adapter is an AC 8260. Weird thing is that with the 5.5.3.arch1-1 I still have the same issue. I will post in the correct thread from now, thank you!

Offline

#11 2020-02-12 15:50:44

loqs
Member
Registered: 2014-03-06
Posts: 17,977

Re: No WiFi after upgrade

It applies to the AC 8260 as well see https://bbs.archlinux.org/viewtopic.php?id=252778.  The patch I linked in post #9 is newer.

Last edited by loqs (2020-02-12 15:56:41)

Offline

#12 2020-02-12 15:56:02

misty
Member
Registered: 2019-01-18
Posts: 5

Re: No WiFi after upgrade

Alright then. I'll try it and let you know.

Offline

#13 2020-03-02 15:13:25

misty
Member
Registered: 2019-01-18
Posts: 5

Re: No WiFi after upgrade

Update:
The kernel 5.5.7 is still not working with my wifi adapter.
Tried to apply the patch in post #9 but I got this:


patching file drivers/net/wireless/intel/iwlwifi/fw/acpi.c
patching file drivers/net/wireless/intel/iwlwifi/fw/acpi.h
patching file drivers/net/wireless/intel/iwlwifi/mvm/fw.c
Setting version...
Applying patch fix_iwlwifi_init.patch...
patching file drivers/net/wireless/intel/iwlwifi/fw/acpi.c
Reversed (or previously applied) patch detected!  Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/wireless/intel/iwlwifi/fw/acpi.c.rej
patching file drivers/net/wireless/intel/iwlwifi/fw/acpi.h
Reversed (or previously applied) patch detected!  Skipping patch.
2 out of 2 hunks ignored -- saving rejects to file drivers/net/wireless/intel/iwlwifi/fw/acpi.h.rej
patching file drivers/net/wireless/intel/iwlwifi/mvm/fw.c
Reversed (or previously applied) patch detected!  Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file drivers/net/wireless/intel/iwlwifi/mvm/fw.c.rej

Any input appreciated.

Last edited by misty (2020-03-02 15:46:42)

Offline

#14 2020-03-05 15:59:20

joanbrugueram
Member
Registered: 2018-11-12
Posts: 21

Re: No WiFi after upgrade

@misty: It looks like you are trying to modify the PKGBUILD of the kernel to apply the patches. But it looks like you added a command to apply the patch in prepare() before line 37, but if you look at the PKGBUILD, in lines 42-49, it's already applying any patch listed in the source=(...) array. Therefore it's trying to apply the patch twice, the first time it succeeds, the second time it fails because it's already applied.

So, remove your own line to apply the patch in prepare() and just list the patch in the source=(...) array (and sha256sums=(...) of course). That should fix your problem.

Last edited by joanbrugueram (2020-03-05 15:59:59)

Offline

#15 2020-03-08 21:37:18

misty
Member
Registered: 2019-01-18
Posts: 5

Re: No WiFi after upgrade

joanbrugueram wrote:

@misty: It looks like you are trying to modify the PKGBUILD of the kernel to apply the patches. But it looks like you added a command to apply the patch in prepare() before line 37, but if you look at the PKGBUILD, in lines 42-49, it's already applying any patch listed in the source=(...) array. Therefore it's trying to apply the patch twice, the first time it succeeds, the second time it fails because it's already applied.

So, remove your own line to apply the patch in prepare() and just list the patch in the source=(...) array (and sha256sums=(...) of course). That should fix your problem.

Thank you, that was exactly it.

I can confirm the patch works against 5.5.7

EDIT: fixed in 5.5.13

Last edited by misty (2020-03-27 19:08:24)

Offline

Board footer

Powered by FluxBB