You are not logged in.

#1 2020-02-07 09:39:13

beef
Member
Registered: 2016-04-28
Posts: 21

Bluetooth headset not available in pavucontrol Sony WH-100xm3

Hey,

I wanted to connect my Sony WH-100xm3 headphones via bluetooth to my Lenovo T480s.

I followed the configuration as described to connect the headphones.
It also worked in the plasma system settings to connect them.


However, I cannot select the headphones (even when bluetooth is connected) in pavucontrol as output devices.
Only "Speakers" and "Headphones (unplugged)" is available under output devices.

>> pactl list | grep -C2 A2DP
returns nothing.

When I plug them in, it works. But I want to use them via bluetooth.


Any ideas?

Last edited by beef (2020-02-07 18:53:42)

Offline

#2 2020-02-07 10:54:57

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,674

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

You'd want to use pactl list | grep -C2 a2dp the string is unlikely to ever be uppercase.

That said, is pulseaudio-bluetooth installed? and what are your outputs for

pacmd list-cards
pacmd list-sinks

in [ code ] [ /code ] tags.

Online

#3 2020-02-07 11:36:29

beef
Member
Registered: 2016-04-28
Posts: 21

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

Thanks for looking into this smile

>> pactl list | grep -C2 a2dp
(still no return)

output of
>>pacmd list-cards

1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1f.3>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xed248000 irq 141"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

output of
>> pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9039
	volume: front-left: 36043 /  55% / -15.58 dB,   front-right: 36043 /  55% / -15.58 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC257 Analog"
		alsa.id = "ALC257 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xed248000 irq 141"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC257"
		alsa.components = "HDA:10ec0257,17aa2258,00100001 HDA:8086280b,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

Offline

#4 2020-02-07 15:42:15

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,674

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

dmesg | grep -i bluetooth
bluetoothctl paired-devices
bluetoothctl info $devicelistedabove$
journalctl -b --user-unit=pulseaudio
pacman -Qs pulseaudio

Last edited by V1del (2020-02-07 15:43:49)

Online

#5 2020-02-07 16:02:35

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 711

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

Using GDM by any chance?

Offline

#6 2020-02-07 18:33:42

beef
Member
Registered: 2016-04-28
Posts: 21

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

No, I am using sddm not gdm.

dmesg | grep -i bluetooth

[    3.028579] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    5.142482] Bluetooth: Core ver 2.22
[    5.142548] Bluetooth: HCI device and connection manager initialized
[    5.142555] Bluetooth: HCI socket layer initialized
[    5.142560] Bluetooth: L2CAP socket layer initialized
[    5.142566] Bluetooth: SCO socket layer initialized
[    5.289795] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[    5.290835] Bluetooth: hci0: Device revision is 16
[    5.290840] Bluetooth: hci0: Secure boot is enabled
[    5.290842] Bluetooth: hci0: OTP lock is enabled
[    5.290845] Bluetooth: hci0: API lock is enabled
[    5.290847] Bluetooth: hci0: Debug lock is disabled
[    5.290851] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.292501] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[    5.365146] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.365151] Bluetooth: BNEP filters: protocol multicast
[    5.365160] Bluetooth: BNEP socket layer initialized
[    6.898304] Bluetooth: hci0: Waiting for firmware download to complete
[    6.898738] Bluetooth: hci0: Firmware loaded in 1572632 usecs
[    6.898856] Bluetooth: hci0: Waiting for device to boot
[    6.910835] Bluetooth: hci0: Device booted in 11741 usecs
[    6.911067] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[    6.913884] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.915895] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
[   52.912253] Bluetooth: RFCOMM TTY layer initialized
[   52.912270] Bluetooth: RFCOMM socket layer initialized
[   52.912281] Bluetooth: RFCOMM ver 1.11

bluetoothctl paired-devices

Device 38:18:4C:6D:EC:93 LE_WH-1000XM3

bluetoothctl info 38:18:4C:6D:EC:93

Device 38:18:4C:6D:EC:93 (public)
	Name: LE_WH-1000XM3
	Alias: LE_WH-1000XM3
	Paired: yes
	Trusted: no
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Vendor specific           (00000000-deca-fade-deca-deafdecacaff)
	UUID: Headset                   (00001108-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: Handsfree                 (0000111e-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
	UUID: Unknown                   (0000fe03-0000-1000-8000-00805f9b34fb)
	UUID: Vendor specific           (5b833e05-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (5b833e06-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (69a7f243-e52f-4443-a7f9-cb4d053c74d6)
	UUID: Vendor specific           (7b265b0e-2232-4d45-bef4-bb8ae62f813d)
	UUID: Vendor specific           (81c2e72a-0591-443e-a1ff-05f988593351)
	UUID: Vendor specific           (91c10d9c-aaef-42bd-b6d6-8a648c19213d)
	UUID: Vendor specific           (931c7e8a-540f-4686-b798-e8df0a2ad9f7)
	UUID: Vendor specific           (96cc203e-5068-46ad-b32d-e316f5e069ba)
	UUID: Vendor specific           (b9b213ce-eeab-49e4-8fd9-aa478ed1b26b)
	UUID: Vendor specific           (f8d1fbe4-7966-4334-8024-ff96c9330e15)
	UUID: Vendor specific           (fe59bfa8-7fe3-4a05-9d94-99fadc69faff)
	Modalias: usb:v054Cp0CD3d0422

journalctl -b --user-unit=pulseaudio

-- Logs begin at Fri 2019-02-22 08:47:37 CET, end at Fri 2020-02-07 19:30:35 CET. --
Feb 07 18:41:20 steffen-t480s systemd[1327]: Starting Sound Service...
Feb 07 18:41:20 steffen-t480s systemd[1327]: Started Sound Service.

pacman -Qs pulseaudio

local/libcanberra-pulse 0.30+2+gc0620e4-2
    PulseAudio plugin for libcanberra
local/pavucontrol 1:4.0-1
    PulseAudio Volume Control
local/plasma-pa 5.17.5-1 (plasma)
    Plasma applet for audio volume management using PulseAudio
local/pulseaudio 13.0-3
    A featureful, general-purpose sound server
local/pulseaudio-alsa 2-5
    ALSA Configuration for PulseAudio
local/pulseaudio-bluetooth 13.0-3
    Bluetooth support for PulseAudio

Last edited by beef (2020-02-10 13:33:54)

Offline

#7 2020-02-10 13:34:09

beef
Member
Registered: 2016-04-28
Posts: 21

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

Some progress from my side:

I managed to set up the Bluetooth headset on another laptop of mine running Arch Linux and Cinnamon instead of KDE Plasma as desktop environment.
Worked like a charm. After pairing and connecting via bluetoothctl I found the headset in pavucontrol.

Maybe a conflict of pulseaudio and plasma sound tools?

Here is the relevant output of the commands previously asked for (but now on Cinnamon laptop):
pactl list | grep -C2 a2dp

Sink #1
	State: RUNNING
	Name: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink
	Description: WH-1000XM3
	Driver: module-bluez5-device.c
--
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor
	Latency: 56181 usec, configured 45317 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "WH-1000XM3"
		device.string = "38:18:4C:6D:EC:93"
--
Source #2
	State: RUNNING
	Name: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor
	Description: Monitor of WH-1000XM3
	Driver: module-bluez5-device.c
--
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor of Sink: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink
	Latency: 0 usec, configured 45317 usec
	Flags: DECIBEL_VOLUME LATENCY 
--
	Profiles:
		headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: 1, sources: 1, priority: 30, available: yes)
		a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: 1, sources: 0, priority: 40, available: yes)
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
	Active Profile: a2dp_sink
	Ports:
		unknown-output: Bluetooth Output (priority: 0, latency offset: 0 usec, available)
			Part of profile(s): headset_head_unit, a2dp_sink
		unknown-input: Bluetooth Input (priority: 0, latency offset: 0 usec)
			Part of profile(s): headset_head_unit

pacmd list-cards

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf1610000 irq 35"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <bluez_card.38_18_4C_6D_EC_93>
	driver: <module-bluez5-device.c>
	owner module: 22
	properties:
		device.description = "WH-1000XM3"
		device.string = "38:18:4C:6D:EC:93"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		bluez.path = "/org/bluez/hci0/dev_38_18_4C_6D_EC_93"
		bluez.class = "0x000000"
		bluez.alias = "WH-1000XM3"
		device.icon_name = "audio-card-bluetooth"
	profiles:
		headset_head_unit: Headset Head Unit (HSP/HFP) (priority 30, available: unknown)
		a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 40, available: yes)
		off: Off (priority 0, available: yes)
	active profile: <a2dp_sink>
	sinks:
		bluez_sink.38_18_4C_6D_EC_93.a2dp_sink/#1: WH-1000XM3
	sources:
		bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor/#2: Monitor of WH-1000XM3
	ports:
		unknown-output: Bluetooth Output (priority 0, latency offset 0 usec, available: yes)
			properties:
				
		unknown-input: Bluetooth Input (priority 0, latency offset 0 usec, available: unknown)
			properties:
				

pacmd list-sinks

2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 36036 /  55% / -15,58 dB,   front-right: 36036 /  55% / -15,58 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 39,90 ms
	max request: 6 KiB
	max rewind: 6 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40,00 ms; range is 0,50 .. 2000,00 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf1610000 irq 35"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,17aa5006,00100202 HDA:80862806,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
    index: 1
	name: <bluez_sink.38_18_4C_6D_EC_93.a2dp_sink>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 9050
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 61,36 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 2
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 3
	fixed latency: 45,32 ms
	card: 1 <bluez_card.38_18_4C_6D_EC_93>
	module: 22
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "WH-1000XM3"
		device.string = "38:18:4C:6D:EC:93"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		bluez.path = "/org/bluez/hci0/dev_38_18_4C_6D_EC_93"
		bluez.class = "0x000000"
		bluez.alias = "WH-1000XM3"
		device.icon_name = "audio-card-bluetooth"
	ports:
		unknown-output: Bluetooth Output (priority 0, latency offset 0 usec, available: yes)
			properties:
				
	active port: <unknown-output>

dmesg | grep -i bluetooth

[    9.790712] Bluetooth: Core ver 2.22
[    9.790734] Bluetooth: HCI device and connection manager initialized
[    9.790738] Bluetooth: HCI socket layer initialized
[    9.790740] Bluetooth: L2CAP socket layer initialized
[    9.790743] Bluetooth: SCO socket layer initialized
[    9.886595] Bluetooth: hci0: unexpected event for opcode 0x0000
[  994.475009] audit: type=1130 audit(1581342307.891:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  994.506186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  994.506190] Bluetooth: BNEP filters: protocol multicast
[  994.506199] Bluetooth: BNEP socket layer initialized
[ 1256.359454] Bluetooth: RFCOMM TTY layer initialized
[ 1256.359471] Bluetooth: RFCOMM socket layer initialized
[ 1256.359480] Bluetooth: RFCOMM ver 1.11

bluetoothctl paired-devices

Device 38:18:4C:6D:EC:93 WH-1000XM3

bluetoothctl info 38:18:4C:6D:EC:93

Device 38:18:4C:6D:EC:93 (public)
	Name: WH-1000XM3
	Alias: WH-1000XM3
	Paired: yes
	Trusted: no
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Vendor specific           (00000000-deca-fade-deca-deafdecacaff)
	UUID: Headset                   (00001108-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: Handsfree                 (0000111e-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: Vendor specific           (7b265b0e-2232-4d45-bef4-bb8ae62f813d)
	UUID: Vendor specific           (81c2e72a-0591-443e-a1ff-05f988593351)
	UUID: Vendor specific           (931c7e8a-540f-4686-b798-e8df0a2ad9f7)
	UUID: Vendor specific           (96cc203e-5068-46ad-b32d-e316f5e069ba)
	UUID: Vendor specific           (b9b213ce-eeab-49e4-8fd9-aa478ed1b26b)
	UUID: Vendor specific           (f8d1fbe4-7966-4334-8024-ff96c9330e15)
	Modalias: usb:v054Cp0CD3d0422
	ManufacturerData Key: 0x012d
	ManufacturerData Value:
  04 00 01 31 00 01 ed 06 48 dc 00 60 d0 00 00 00  ...1....H..`....
  00 00 00                                         ...             

journalctl -b --user-unit=pulseaudio

-- Logs begin at Sat 2017-04-15 19:46:17 CEST, end at Mon 2020-02-10 14:56:38 CET. --
Feb 10 14:29:15 edge-e330 systemd[1668]: Starting Sound Service...
Feb 10 14:29:21 edge-e330 systemd[1668]: Started Sound Service.
Feb 10 14:49:23 edge-e330 systemd[1668]: pulseaudio.service: Succeeded.
Feb 10 14:49:29 edge-e330 systemd[1668]: Starting Sound Service...
Feb 10 14:49:29 edge-e330 systemd[1668]: Started Sound Service.

pacman -Qs pulseaudio

local/lib32-libpulse 13.0-1
    A featureful, general-purpose sound server (32-bit client libraries)
local/libcanberra-pulse 0.30+2+gc0620e4-2
    PulseAudio plugin for libcanberra
local/pavucontrol 1:4.0-1
    PulseAudio Volume Control
local/pulseaudio 13.0-3
    A featureful, general-purpose sound server
local/pulseaudio-alsa 2-5
    ALSA Configuration for PulseAudio
local/pulseaudio-bluetooth 13.0-3
    Bluetooth support for PulseAudio

Last edited by beef (2020-02-10 14:06:57)

Offline

#8 2020-02-12 11:26:27

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 8,674

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

Shouldn't be, all relevant plasma tools use and rely on pulseaudio if present and pulse is what's supposed to give you access to the bluetooth card. Which actual bluetooth adapter is in use on each system? First one looks intel, they have been plagued with firmware issues recently. Might have luck downgrading linux-firmware a few notches.

Online

#9 2020-02-12 13:53:23

Dheart
Member
From: Sofia, Bulgaria
Registered: 2006-10-26
Posts: 955

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

This started happening to me after updating yesterday. Worked fine before that.


My victim you are meant to be
No, you cannot hide nor flee
You know what I'm looking for
Pleasure your torture, I will endure...

Offline

#10 2020-02-12 15:40:16

beef
Member
Registered: 2016-04-28
Posts: 21

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

On my Lenovo T480s, where the headset does not work, the wifi (and bluetooth) adapter is (from lspci):
Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)

On my Lenovo Edge E330, where the headset does work, the wifi adapter is (found the specs online as I do not have the E330 with me at the moment):
Intel Centrino Wireless-N 2230 (b/g/n = Wi-Fi 4), Bluetooth Intel Centrino 4.0


Do you have a suggestion which version of the linux-firmware to test?


@Dheart:
You have the same network adapter and similar issues?
Do you know which update specifically caused the troubles?

Offline

#11 2020-02-14 14:39:55

Dheart
Member
From: Sofia, Bulgaria
Registered: 2006-10-26
Posts: 955

Re: Bluetooth headset not available in pavucontrol Sony WH-100xm3

@beef, I have

3d:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)

I managed to get it to work by restarting the bluetooth, removing all entries for the headphones and re-pairing. Idk which update exacty broke it, because it was a massive one, including kernel.

Cheers

Last edited by Dheart (2020-02-14 14:40:08)


My victim you are meant to be
No, you cannot hide nor flee
You know what I'm looking for
Pleasure your torture, I will endure...

Offline

Board footer

Powered by FluxBB