You are not logged in.

#26 2020-05-23 20:26:42

seth
Member
Registered: 2012-09-03
Posts: 14,795

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

In the lightdm gui, but apparently dwm was already selecetd for lou - can you now login?
Does the session file have the proper permissions?

Offline

#27 2020-05-23 20:33:08

loubi
Member
Registered: 2020-05-22
Posts: 19

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

How can i know which permissions it should have ?
Permissions are the things I master the less, so here are extra stat in case of ...

stat /usr/share/xsessions/dwm.desktop /home/lou/.xinitrc /etc/lightdm/lightdm.conf

  File: /usr/share/xsessions/dwm.desktop
  Size: 103             Blocks: 8          IO Block: 4096   regular file
Device: 10307h/66311d   Inode: 950693      Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2020-05-23 21:48:22.176968761 +0200
Modify: 2020-05-23 21:23:48.572442586 +0200
Change: 2020-05-23 21:48:14.964988653 +0200
 Birth: 2020-05-23 21:23:48.572442586 +0200
  File: /home/lou/.xinitrc
  Size: 9               Blocks: 8          IO Block: 4096   regular file
Device: 10307h/66311d   Inode: 262671      Links: 1
Access: (0644/-rw-r--r--)  Uid: ( 1000/     lou)   Gid: (  985/   users)
Access: 2020-05-23 17:17:39.781546143 +0200
Modify: 2020-05-22 01:24:00.108715843 +0200
Change: 2020-05-22 01:24:00.108715843 +0200
 Birth: 2020-05-22 01:24:00.108715843 +0200
  File: /etc/lightdm/lightdm.conf
  Size: 6778            Blocks: 16         IO Block: 4096   regular file
Device: 10307h/66311d   Inode: 132413      Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2020-05-23 21:40:39.092116457 +0200
Modify: 2020-05-23 21:36:06.265516314 +0200
Change: 2020-05-23 21:36:06.265516314 +0200
 Birth: 2020-05-23 21:36:06.265516314 +0200

Offline

#28 2020-05-23 20:36:44

seth
Member
Registered: 2012-09-03
Posts: 14,795

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

https://aur.archlinux.org/cgit/aur.git/ … UILD?h=dwm - it's installed as 644

Can you login now that the dmrc changed? You should no longer get

[+12.57s] DEBUG: Seat seat0: Failed to find session configuration default
[+12.57s] DEBUG: Seat seat0: Can't find session 'default'

for sure.

Offline

#29 2020-05-23 20:52:30

loubi
Member
Registered: 2020-05-22
Posts: 19

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

I can login now, but dwm does not show, and I putting back to the greeter after a 4~5sec blackscreen.

lightdm.log :

[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=461
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.53s] DEBUG: Monitoring logind for seats
[+0.53s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.53s] DEBUG: posix_spawn avoided (fd close requested) 
[+0.53s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.53s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
[+0.53s] DEBUG: Loading user config from /etc/lightdm/users.conf
[+0.53s] DEBUG: User lou added
[+0.53s] DEBUG: posix_spawn avoided (automatic reaping requested) (fd close requested) 
[+1.21s] DEBUG: Seat seat0 changes graphical state to true
[+1.21s] DEBUG: New seat added from logind: seat0
[+1.21s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+1.21s] DEBUG: Seat seat0: Starting
[+1.21s] DEBUG: Seat seat0: Creating greeter session
[+1.21s] DEBUG: Seat seat0: Creating display server of type x
[+1.21s] DEBUG: Using VT 1
[+1.21s] DEBUG: Seat seat0: Starting local X display on VT 1
[+1.21s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+1.21s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+1.21s] DEBUG: XServer 0: Launching X Server
[+1.21s] DEBUG: Launching process 539: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
[+1.21s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+1.21s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+4.83s] DEBUG: Got signal 10 from process 539
[+4.83s] DEBUG: XServer 0: Got signal from X server :0
[+4.83s] DEBUG: XServer 0: Connecting to XServer :0
[+5.03s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+5.03s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+5.03s] DEBUG: Session pid=586: Started with service 'lightdm-greeter', username 'lightdm'
[+5.05s] DEBUG: Session pid=586: Authentication complete with return value 0: Success
[+5.05s] DEBUG: Seat seat0: Session authenticated, running command
[+5.05s] DEBUG: Session pid=586: Running command /usr/bin/lightdm-gtk-greeter
[+5.05s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+5.05s] DEBUG: Session pid=586: Logging to /var/log/lightdm/seat0-greeter.log
[+5.14s] DEBUG: Activating VT 1
[+5.14s] DEBUG: Activating login1 session c1
[+5.14s] DEBUG: Seat seat0 changes active session to c1
[+5.14s] DEBUG: Session c1 is already active
[+5.92s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+5.98s] DEBUG: Greeter start authentication for lou
[+5.98s] DEBUG: Session pid=611: Started with service 'lightdm', username 'lou'
[+5.99s] DEBUG: Session pid=611: Got 1 message(s) from PAM
[+5.99s] DEBUG: Prompt greeter with 1 message(s)
[+10.78s] DEBUG: Continue authentication
[+10.81s] DEBUG: Session pid=611: Authentication complete with return value 0: Success
[+10.81s] DEBUG: Authenticate result for user lou: Success
[+10.81s] DEBUG: User lou authorized
[+10.81s] DEBUG: Greeter requests session dwm
[+10.82s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+10.82s] DEBUG: Terminating login1 session c1
[+10.82s] DEBUG: Session pid=586: Sending SIGTERM
[+10.84s] DEBUG: Greeter closed communication channel
[+10.84s] DEBUG: Session pid=586: Exited with return value 0
[+10.84s] DEBUG: Seat seat0: Session stopped
[+10.84s] DEBUG: Seat seat0: Greeter stopped, running session
[+10.84s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+10.84s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+10.84s] DEBUG: Session pid=611: Running command lightdm-session dwm
[+10.84s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lou
[+10.84s] DEBUG: Session pid=611: Logging to .xsession-errors
[+11.01s] DEBUG: Activating VT 1
[+11.01s] DEBUG: Activating login1 session 2
[+11.01s] DEBUG: Seat seat0 changes active session to 
[+11.01s] DEBUG: Seat seat0 changes active session to 2
[+11.01s] DEBUG: Session 2 is already active
[+11.02s] DEBUG: Session pid=611: Exited with return value 1
[+11.02s] DEBUG: Seat seat0: Session stopped
[+11.02s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+11.02s] DEBUG: Sending signal 15 to process 539
[+11.02s] DEBUG: Seat seat0 changes active session to 
[+13.55s] DEBUG: Process 539 exited with return value 0
[+13.55s] DEBUG: XServer 0: X server stopped
[+13.55s] DEBUG: Releasing VT 1
[+13.55s] DEBUG: XServer 0: Removing X server authority /run/lightdm/root/:0
[+13.55s] DEBUG: Seat seat0: Display server stopped
[+13.55s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+13.55s] DEBUG: Seat seat0: Creating greeter session
[+13.55s] DEBUG: Seat seat0: Creating display server of type x
[+13.55s] DEBUG: Using VT 1
[+13.55s] DEBUG: Seat seat0: Starting local X display on VT 1
[+13.55s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+13.55s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+13.55s] DEBUG: XServer 0: Launching X Server
[+13.55s] DEBUG: Launching process 638: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
[+13.55s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+16.86s] DEBUG: Got signal 10 from process 638
[+16.86s] DEBUG: XServer 0: Got signal from X server :0
[+16.86s] DEBUG: XServer 0: Connecting to XServer :0
[+16.86s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+16.86s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+16.87s] DEBUG: Session pid=653: Started with service 'lightdm-greeter', username 'lightdm'
[+16.88s] DEBUG: Session pid=653: Authentication complete with return value 0: Success
[+16.88s] DEBUG: Seat seat0: Session authenticated, running command
[+16.88s] DEBUG: Session pid=653: Running command /usr/bin/lightdm-gtk-greeter
[+16.88s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+16.88s] DEBUG: Session pid=653: Logging to /var/log/lightdm/seat0-greeter.log
[+16.90s] DEBUG: Activating VT 1
[+16.90s] DEBUG: Activating login1 session c2
[+16.90s] DEBUG: Seat seat0 changes active session to c2
[+16.90s] DEBUG: Session c2 is already active
[+16.95s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+16.98s] DEBUG: Greeter start authentication for lou
[+16.98s] DEBUG: Session pid=663: Started with service 'lightdm', username 'lou'
[+16.99s] DEBUG: Session pid=663: Got 1 message(s) from PAM
[+16.99s] DEBUG: Prompt greeter with 1 message(s)
[+32.01s] DEBUG: Continue authentication
[+32.03s] DEBUG: Session pid=663: Authentication complete with return value 0: Success
[+32.03s] DEBUG: Authenticate result for user lou: Success
[+32.03s] DEBUG: User lou authorized
[+32.04s] DEBUG: Greeter requests session dwm
[+32.04s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session
[+32.04s] DEBUG: Terminating login1 session c2
[+32.04s] DEBUG: Session pid=653: Sending SIGTERM
[+32.04s] DEBUG: Greeter closed communication channel
[+32.04s] DEBUG: Session pid=653: Exited with return value 0
[+32.04s] DEBUG: Seat seat0: Session stopped
[+32.04s] DEBUG: Seat seat0: Greeter stopped, running session
[+32.04s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1
[+32.05s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+32.05s] DEBUG: Session pid=663: Running command lightdm-session dwm
[+32.05s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lou
[+32.05s] DEBUG: Session pid=663: Logging to .xsession-errors
[+32.12s] DEBUG: Activating VT 1
[+32.12s] DEBUG: Activating login1 session 4
[+32.12s] DEBUG: Seat seat0 changes active session to 
[+32.12s] DEBUG: Seat seat0 changes active session to 4
[+32.12s] DEBUG: Session 4 is already active
[+32.13s] DEBUG: Session pid=663: Exited with return value 1
[+32.13s] DEBUG: Seat seat0: Session stopped
[+32.13s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+32.13s] DEBUG: Sending signal 15 to process 638
[+32.14s] DEBUG: Seat seat0 changes active session to 
[+34.74s] DEBUG: Process 638 exited with return value 0
[+34.74s] DEBUG: XServer 0: X server stopped
[+34.74s] DEBUG: Releasing VT 1
[+34.74s] DEBUG: XServer 0: Removing X server authority /run/lightdm/root/:0
[+34.74s] DEBUG: Seat seat0: Display server stopped
[+34.74s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+34.74s] DEBUG: Seat seat0: Creating greeter session
[+34.74s] DEBUG: Seat seat0: Creating display server of type x
[+34.74s] DEBUG: Using VT 1
[+34.74s] DEBUG: Seat seat0: Starting local X display on VT 1
[+34.74s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+34.74s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+34.74s] DEBUG: XServer 0: Launching X Server
[+34.74s] DEBUG: Launching process 690: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
[+34.74s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+38.06s] DEBUG: Got signal 10 from process 690
[+38.06s] DEBUG: XServer 0: Got signal from X server :0
[+38.06s] DEBUG: XServer 0: Connecting to XServer :0
[+38.06s] DEBUG: posix_spawn avoided (fd close requested) (child_setup specified) 
[+38.06s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+38.07s] DEBUG: Session pid=704: Started with service 'lightdm-greeter', username 'lightdm'
[+38.08s] DEBUG: Session pid=704: Authentication complete with return value 0: Success
[+38.08s] DEBUG: Seat seat0: Session authenticated, running command
[+38.08s] DEBUG: Session pid=704: Running command /usr/bin/lightdm-gtk-greeter
[+38.08s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+38.08s] DEBUG: Session pid=704: Logging to /var/log/lightdm/seat0-greeter.log
[+38.08s] DEBUG: Activating VT 1
[+38.08s] DEBUG: Activating login1 session c3
[+38.08s] DEBUG: Seat seat0 changes active session to c3
[+38.08s] DEBUG: Session c3 is already active
[+38.13s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+38.16s] DEBUG: Greeter start authentication for lou
[+38.16s] DEBUG: Session pid=714: Started with service 'lightdm', username 'lou'
[+38.17s] DEBUG: Session pid=714: Got 1 message(s) from PAM
[+38.17s] DEBUG: Prompt greeter with 1 message(s)
[+48.54s] DEBUG: Seat seat0 changes active session to 
[+53.45s] DEBUG: Seat seat0 changes active session to 6
[+165.70s] DEBUG: Got signal 15 from process 1
[+165.70s] DEBUG: Caught Terminated signal, shutting down
[+165.70s] DEBUG: Stopping display manager
[+165.70s] DEBUG: Seat seat0: Stopping
[+165.70s] DEBUG: Seat seat0: Stopping display server
[+165.70s] DEBUG: Sending signal 15 to process 690
[+165.70s] DEBUG: Seat seat0: Stopping session
[+165.70s] DEBUG: Terminating login1 session c3
[+165.72s] DEBUG: Session pid=704: Sending SIGTERM
[+165.72s] DEBUG: Seat seat0: Stopping session
[+165.72s] DEBUG: Session pid=714: Sending SIGTERM
[+165.72s] DEBUG: Greeter closed communication channel
[+165.72s] DEBUG: Session pid=704: Exited with return value 0
[+165.72s] DEBUG: Seat seat0: Session stopped
[+165.72s] DEBUG: Session pid=714: Terminated with signal 15
[+165.72s] DEBUG: Session: Failed during authentication
[+165.72s] DEBUG: Seat seat0: Session stopped
[+165.80s] DEBUG: Process 690 exited with return value 0
[+165.81s] DEBUG: XServer 0: X server stopped
[+165.81s] DEBUG: Releasing VT 1
[+165.81s] DEBUG: XServer 0: Removing X server authority /run/lightdm/root/:0
[+165.81s] DEBUG: Seat seat0: Display server stopped
[+165.81s] DEBUG: Seat seat0: Stopped
[+165.81s] DEBUG: Display manager stopped
[+165.81s] DEBUG: Stopping daemon
[+165.81s] DEBUG: Exiting with return value 0

Not sure if it can help, but in case it is related :

Xorg.0.log :

[    37.514] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[    37.514] Build Operating System: Linux Arch Linux
[    37.514] Current Operating System: Linux pcarch 5.6.13-arch1-1 #1 SMP PREEMPT Thu, 14 May 2020 06:52:53 +0000 x86_64
[    37.514] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/nvme0n1p7
[    37.514] Build Date: 05 May 2020  05:08:17AM
[    37.514]  
[    37.514] Current version of pixman: 0.40.0
[    37.514] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    37.514] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    37.514] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 22:44:10 2020
[    37.514] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    37.514] (==) No Layout section.  Using the first Screen section.
[    37.514] (==) No screen section available. Using defaults.
[    37.514] (**) |-->Screen "Default Screen Section" (0)
[    37.514] (**) |   |-->Monitor "<default monitor>"
[    37.514] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    37.514] (==) Automatically adding devices
[    37.514] (==) Automatically enabling devices
[    37.514] (==) Automatically adding GPU devices
[    37.514] (==) Automatically binding GPU devices
[    37.514] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    37.514] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[    37.514] 	Entry deleted from font path.
[    37.514] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[    37.514] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    37.514] 	Entry deleted from font path.
[    37.514] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    37.514] 	Entry deleted from font path.
[    37.514] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    37.514] 	Entry deleted from font path.
[    37.514] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    37.514] (==) ModulePath set to "/usr/lib/xorg/modules"
[    37.514] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    37.514] (II) Module ABI versions:
[    37.514] 	X.Org ANSI C Emulation: 0.4
[    37.514] 	X.Org Video Driver: 24.1
[    37.514] 	X.Org XInput driver : 24.1
[    37.514] 	X.Org Server Extension : 10.0
[    37.515] (++) using VT number 1

[    37.515] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    37.515] (II) xfree86: Adding drm device (/dev/dri/card0)
[    37.516] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    37.517] (--) PCI:*(1@0:0:0) 10de:1f91:17aa:229f rev 161, Mem @ 0xed000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    37.517] (II) Open ACPI successful (/var/run/acpid.socket)
[    37.517] (II) LoadModule: "glx"
[    37.517] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    37.518] (II) Module glx: vendor="X.Org Foundation"
[    37.518] 	compiled for 1.20.8, module version = 1.0.0
[    37.518] 	ABI class: X.Org Server Extension, version 10.0
[    37.518] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    37.518] 	loading driver: nvidia
[    37.518] (==) Matched nvidia as autoconfigured driver 0
[    37.518] (==) Matched nouveau as autoconfigured driver 1
[    37.518] (==) Matched nv as autoconfigured driver 2
[    37.518] (==) Matched modesetting as autoconfigured driver 3
[    37.518] (==) Matched fbdev as autoconfigured driver 4
[    37.518] (==) Matched vesa as autoconfigured driver 5
[    37.518] (==) Assigned the driver to the xf86ConfigLayout
[    37.518] (II) LoadModule: "nvidia"
[    37.518] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    37.518] (II) Module nvidia: vendor="NVIDIA Corporation"
[    37.518] 	compiled for 1.6.99.901, module version = 1.0.0
[    37.518] 	Module class: X.Org Video Driver
[    37.518] (II) LoadModule: "nouveau"
[    37.518] (WW) Warning, couldn't open module nouveau
[    37.518] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    37.518] (II) LoadModule: "nv"
[    37.518] (WW) Warning, couldn't open module nv
[    37.518] (EE) Failed to load module "nv" (module does not exist, 0)
[    37.518] (II) LoadModule: "modesetting"
[    37.518] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    37.519] (II) Module modesetting: vendor="X.Org Foundation"
[    37.519] 	compiled for 1.20.8, module version = 1.20.8
[    37.519] 	Module class: X.Org Video Driver
[    37.519] 	ABI class: X.Org Video Driver, version 24.1
[    37.519] (II) LoadModule: "fbdev"
[    37.519] (WW) Warning, couldn't open module fbdev
[    37.519] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    37.519] (II) LoadModule: "vesa"
[    37.519] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    37.519] (II) Module vesa: vendor="X.Org Foundation"
[    37.519] 	compiled for 1.20.8, module version = 2.4.0
[    37.519] 	Module class: X.Org Video Driver
[    37.519] 	ABI class: X.Org Video Driver, version 24.1
[    37.519] (II) NVIDIA dlloader X Driver  440.82  Wed Apr  1 19:50:17 UTC 2020
[    37.519] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    37.519] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    37.519] (II) VESA: driver for VESA chipsets: vesa
[    37.519] (II) Loading sub module "fb"
[    37.519] (II) LoadModule: "fb"
[    37.519] (II) Loading /usr/lib/xorg/modules/libfb.so
[    37.519] (II) Module fb: vendor="X.Org Foundation"
[    37.519] 	compiled for 1.20.8, module version = 1.0.0
[    37.519] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    37.519] (II) Loading sub module "wfb"
[    37.519] (II) LoadModule: "wfb"
[    37.519] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    37.519] (II) Module wfb: vendor="X.Org Foundation"
[    37.519] 	compiled for 1.20.8, module version = 1.0.0
[    37.519] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    37.519] (II) Loading sub module "ramdac"
[    37.519] (II) LoadModule: "ramdac"
[    37.519] (II) Module "ramdac" already built-in
[    37.520] (WW) Falling back to old probe method for modesetting
[    37.520] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    37.520] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    37.520] (==) NVIDIA(0): RGB weight 888
[    37.520] (==) NVIDIA(0): Default visual is TrueColor
[    37.520] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    37.520] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    37.520] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    37.520] (**) NVIDIA(0): Enabling 2D acceleration
[    37.520] (II) Loading sub module "glxserver_nvidia"
[    37.520] (II) LoadModule: "glxserver_nvidia"
[    37.520] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    37.524] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    37.524] 	compiled for 1.6.99.901, module version = 1.0.0
[    37.524] 	Module class: X.Org Server Extension
[    37.524] (II) NVIDIA GLX Module  440.82  Wed Apr  1 19:47:36 UTC 2020
[    37.524] (II) NVIDIA: The X server supports PRIME Render Offload.
[    38.093] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    38.093] (--) NVIDIA(0):     DFP-0
[    38.093] (--) NVIDIA(0):     DFP-1
[    38.093] (--) NVIDIA(0):     DFP-2 (boot)
[    38.093] (--) NVIDIA(0):     DFP-3 (boot)
[    38.094] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1650 with Max-Q Design (TU117-A) at
[    38.094] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[    38.094] (--) NVIDIA(0): Memory: 4194304 kBytes
[    38.094] (--) NVIDIA(0): VideoBIOS: 90.17.31.00.26
[    38.094] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    38.094] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    38.094] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    38.094] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[    38.094] (--) NVIDIA(GPU-0): 
[    38.094] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    38.094] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    38.094] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[    38.094] (--) NVIDIA(GPU-0): 
[    38.124] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): connected
[    38.124] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): Internal TMDS
[    38.124] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): 600.0 MHz maximum pixel clock
[    38.124] (--) NVIDIA(GPU-0): 
[    38.124] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): connected
[    38.124] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): Internal DisplayPort
[    38.124] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): 2660.0 MHz maximum pixel clock
[    38.124] (--) NVIDIA(GPU-0): 
[    38.163] (==) NVIDIA(0): 
[    38.163] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    38.163] (==) NVIDIA(0):     will be used as the requested mode.
[    38.163] (==) NVIDIA(0): 
[    38.165] (II) NVIDIA(0): Validated MetaModes:
[    38.165] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select,DFP-2:nvidia-auto-select"
[    38.165] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[    38.177] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
[    38.177] (--) NVIDIA(0):     option
[    38.177] (II) UnloadModule: "modesetting"
[    38.177] (II) Unloading modesetting
[    38.177] (II) UnloadModule: "vesa"
[    38.177] (II) Unloading vesa
[    38.177] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[    38.177] (II) NVIDIA:     access.
[    38.208] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-2:nvidia-auto-select"
[    39.980] (==) NVIDIA(0): Disabling shared memory pixmaps
[    39.984] (==) NVIDIA(0): Backing store enabled
[    39.984] (==) NVIDIA(0): Silken mouse disabled
[    39.984] (==) NVIDIA(0): DPMS enabled
[    39.984] (II) Loading sub module "dri2"
[    39.984] (II) LoadModule: "dri2"
[    39.984] (II) Module "dri2" already built-in
[    39.984] (II) NVIDIA(0): [DRI2] Setup complete
[    39.984] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    39.984] (II) Initializing extension Generic Event Extension
[    39.984] (II) Initializing extension SHAPE
[    39.984] (II) Initializing extension MIT-SHM
[    39.984] (II) Initializing extension XInputExtension
[    39.984] (II) Initializing extension XTEST
[    39.984] (II) Initializing extension BIG-REQUESTS
[    39.984] (II) Initializing extension SYNC
[    39.984] (II) Initializing extension XKEYBOARD
[    39.984] (II) Initializing extension XC-MISC
[    39.985] (II) Initializing extension SECURITY
[    39.985] (II) Initializing extension XFIXES
[    39.985] (II) Initializing extension RENDER
[    39.985] (II) Initializing extension RANDR
[    39.985] (II) Initializing extension COMPOSITE
[    39.985] (II) Initializing extension DAMAGE
[    39.985] (II) Initializing extension MIT-SCREEN-SAVER
[    39.985] (II) Initializing extension DOUBLE-BUFFER
[    39.985] (II) Initializing extension RECORD
[    39.985] (II) Initializing extension DPMS
[    39.985] (II) Initializing extension Present
[    39.985] (II) Initializing extension DRI3
[    39.985] (II) Initializing extension X-Resource
[    39.985] (II) Initializing extension XVideo
[    39.985] (II) Initializing extension XVideo-MotionCompensation
[    39.985] (II) Initializing extension GLX
[    39.985] (II) Initializing extension GLX
[    39.985] (II) Indirect GLX disabled.
[    39.985] (II) GLX: Another vendor is already registered for screen 0
[    39.985] (II) Initializing extension XFree86-VidModeExtension
[    39.986] (II) Initializing extension XFree86-DGA
[    39.986] (II) Initializing extension XFree86-DRI
[    39.986] (II) Initializing extension DRI2
[    39.986] (II) Initializing extension NV-GLX
[    39.986] (II) Initializing extension NV-CONTROL
[    39.986] (II) Initializing extension XINERAMA
[    40.026] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    40.026] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    40.026] (II) LoadModule: "libinput"
[    40.026] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    40.027] (II) Module libinput: vendor="X.Org Foundation"
[    40.027] 	compiled for 1.20.8, module version = 0.30.0
[    40.027] 	Module class: X.Org XInput Driver
[    40.027] 	ABI class: X.Org XInput driver, version 24.1
[    40.027] (II) Using input driver 'libinput' for 'Power Button'
[    40.027] (**) Power Button: always reports core events
[    40.027] (**) Option "Device" "/dev/input/event2"
[    40.027] (**) Option "_source" "server/udev"
[    40.028] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    40.028] (II) event2  - Power Button: device is a keyboard
[    40.028] (II) event2  - Power Button: device removed
[    40.050] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    40.050] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.051] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    40.051] (II) event2  - Power Button: device is a keyboard
[    40.051] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    40.051] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    40.051] (II) Using input driver 'libinput' for 'Video Bus'
[    40.051] (**) Video Bus: always reports core events
[    40.051] (**) Option "Device" "/dev/input/event3"
[    40.051] (**) Option "_source" "server/udev"
[    40.052] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    40.052] (II) event3  - Video Bus: device is a keyboard
[    40.052] (II) event3  - Video Bus: device removed
[    40.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3/event3"
[    40.090] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    40.091] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    40.091] (II) event3  - Video Bus: device is a keyboard
[    40.092] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    40.092] (II) No input driver specified, ignoring this device.
[    40.092] (II) This device may have been added with another device file.
[    40.092] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    40.092] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    40.092] (II) Using input driver 'libinput' for 'Sleep Button'
[    40.092] (**) Sleep Button: always reports core events
[    40.092] (**) Option "Device" "/dev/input/event0"
[    40.092] (**) Option "_source" "server/udev"
[    40.093] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    40.093] (II) event0  - Sleep Button: device is a keyboard
[    40.093] (II) event0  - Sleep Button: device removed
[    40.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    40.117] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    40.118] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    40.118] (II) event0  - Sleep Button: device is a keyboard
[    40.118] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    40.118] (II) No input driver specified, ignoring this device.
[    40.118] (II) This device may have been added with another device file.
[    40.119] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    40.119] (II) No input driver specified, ignoring this device.
[    40.119] (II) This device may have been added with another device file.
[    40.119] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    40.119] (II) No input driver specified, ignoring this device.
[    40.119] (II) This device may have been added with another device file.
[    40.119] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event11)
[    40.119] (II) No input driver specified, ignoring this device.
[    40.119] (II) This device may have been added with another device file.
[    40.120] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event12)
[    40.120] (II) No input driver specified, ignoring this device.
[    40.120] (II) This device may have been added with another device file.
[    40.120] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    40.120] (II) No input driver specified, ignoring this device.
[    40.120] (II) This device may have been added with another device file.
[    40.121] (II) config/udev: Adding input device Logitech M325 (/dev/input/event17)
[    40.121] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[    40.121] (II) Using input driver 'libinput' for 'Logitech M325'
[    40.121] (**) Logitech M325: always reports core events
[    40.121] (**) Option "Device" "/dev/input/event17"
[    40.121] (**) Option "_source" "server/udev"
[    40.123] (II) event17 - Logitech M325: is tagged by udev as: Mouse
[    40.123] (II) event17 - Logitech M325: device set to 600 DPI
[    40.123] (II) event17 - Logitech M325: device is a pointer
[    40.123] (II) event17 - Logitech M325: device removed
[    40.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input36/event17"
[    40.183] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 9)
[    40.184] (**) Option "AccelerationScheme" "none"
[    40.184] (**) Logitech M325: (accel) selected scheme none/0
[    40.184] (**) Logitech M325: (accel) acceleration factor: 2.000
[    40.184] (**) Logitech M325: (accel) acceleration threshold: 4
[    40.189] (II) event17 - Logitech M325: is tagged by udev as: Mouse
[    40.190] (II) event17 - Logitech M325: device set to 600 DPI
[    40.190] (II) event17 - Logitech M325: device is a pointer
[    40.193] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[    40.193] (II) No input driver specified, ignoring this device.
[    40.193] (II) This device may have been added with another device file.
[    40.195] (II) config/udev: Adding input device Logitech K800 (/dev/input/event19)
[    40.195] (**) Logitech K800: Applying InputClass "libinput keyboard catchall"
[    40.195] (II) Using input driver 'libinput' for 'Logitech K800'
[    40.195] (**) Logitech K800: always reports core events
[    40.195] (**) Option "Device" "/dev/input/event19"
[    40.195] (**) Option "_source" "server/udev"
[    40.201] (II) event19 - Logitech K800: is tagged by udev as: Keyboard
[    40.201] (II) event19 - Logitech K800: device is a keyboard
[    40.202] (II) event19 - Logitech K800: device removed
[    40.237] (II) libinput: Logitech K800: needs a virtual subdevice
[    40.237] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:406E.0007/input/input37/event19"
[    40.237] (II) XINPUT: Adding extended input device "Logitech K800" (type: MOUSE, id 10)
[    40.237] (**) Option "AccelerationScheme" "none"
[    40.237] (**) Logitech K800: (accel) selected scheme none/0
[    40.237] (**) Logitech K800: (accel) acceleration factor: 2.000
[    40.237] (**) Logitech K800: (accel) acceleration threshold: 4
[    40.242] (II) event19 - Logitech K800: is tagged by udev as: Keyboard
[    40.243] (II) event19 - Logitech K800: device is a keyboard
[    40.246] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 100 Gaming Mouse (/dev/input/event23)
[    40.246] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[    40.246] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Rival 100 Gaming Mouse'
[    40.246] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: always reports core events
[    40.246] (**) Option "Device" "/dev/input/event23"
[    40.246] (**) Option "_source" "server/udev"
[    40.308] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: is tagged by udev as: Mouse
[    40.309] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device is a pointer
[    40.309] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device removed
[    40.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:1038:1702.0005/input/input25/event23"
[    40.357] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Rival 100 Gaming Mouse" (type: MOUSE, id 11)
[    40.357] (**) Option "AccelerationScheme" "none"
[    40.357] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) selected scheme none/0
[    40.357] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) acceleration factor: 2.000
[    40.357] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) acceleration threshold: 4
[    40.418] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: is tagged by udev as: Mouse
[    40.419] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device is a pointer
[    40.421] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 100 Gaming Mouse (/dev/input/mouse3)
[    40.421] (II) No input driver specified, ignoring this device.
[    40.421] (II) This device may have been added with another device file.
[    40.423] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event18)
[    40.423] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    40.423] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    40.423] (**) Integrated Camera: Integrated C: always reports core events
[    40.423] (**) Option "Device" "/dev/input/event18"
[    40.423] (**) Option "_source" "server/udev"
[    40.427] (II) event18 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    40.428] (II) event18 - Integrated Camera: Integrated C: device is a keyboard
[    40.428] (II) event18 - Integrated Camera: Integrated C: device removed
[    40.477] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input19/event18"
[    40.477] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 12)
[    40.481] (II) event18 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    40.482] (II) event18 - Integrated Camera: Integrated C: device is a keyboard
[    40.484] (II) config/udev: Adding input device Integrated Camera: Integrated I (/dev/input/event22)
[    40.484] (**) Integrated Camera: Integrated I: Applying InputClass "libinput keyboard catchall"
[    40.484] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated I'
[    40.484] (**) Integrated Camera: Integrated I: always reports core events
[    40.484] (**) Option "Device" "/dev/input/event22"
[    40.484] (**) Option "_source" "server/udev"
[    40.488] (II) event22 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[    40.488] (II) event22 - Integrated Camera: Integrated I: device is a keyboard
[    40.489] (II) event22 - Integrated Camera: Integrated I: device removed
[    40.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/input/input24/event22"
[    40.543] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated I" (type: KEYBOARD, id 13)
[    40.548] (II) event22 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[    40.548] (II) event22 - Integrated Camera: Integrated I: device is a keyboard
[    40.550] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    40.550] (II) No input driver specified, ignoring this device.
[    40.550] (II) This device may have been added with another device file.
[    40.551] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    40.551] (II) No input driver specified, ignoring this device.
[    40.551] (II) This device may have been added with another device file.
[    40.553] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    40.553] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    40.553] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    40.553] (**) AT Translated Set 2 keyboard: always reports core events
[    40.553] (**) Option "Device" "/dev/input/event4"
[    40.553] (**) Option "_source" "server/udev"
[    40.556] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.556] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    40.559] (II) event4  - AT Translated Set 2 keyboard: device removed
[    40.597] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    40.597] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    40.601] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    40.601] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    40.605] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    40.605] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    40.605] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    40.605] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    40.605] (**) Option "Device" "/dev/input/event15"
[    40.605] (**) Option "_source" "server/udev"
[    40.608] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    40.610] (II) event15 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    40.613] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    40.613] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[    40.677] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[    40.678] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    40.681] (**) Option "AccelerationScheme" "none"
[    40.681] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    40.681] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    40.681] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    40.684] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    40.686] (II) event15 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[    40.689] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    40.691] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    40.691] (II) No input driver specified, ignoring this device.
[    40.691] (II) This device may have been added with another device file.
[    40.693] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/event16)
[    40.693] (**) TPPS/2 Elan TrackPoint: Applying InputClass "libinput pointer catchall"
[    40.693] (II) Using input driver 'libinput' for 'TPPS/2 Elan TrackPoint'
[    40.693] (**) TPPS/2 Elan TrackPoint: always reports core events
[    40.693] (**) Option "Device" "/dev/input/event16"
[    40.693] (**) Option "_source" "server/udev"
[    40.697] (II) event16 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[    40.698] (II) event16 - TPPS/2 Elan TrackPoint: device is a pointer
[    40.701] (II) event16 - TPPS/2 Elan TrackPoint: device removed
[    40.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event16"
[    40.757] (II) XINPUT: Adding extended input device "TPPS/2 Elan TrackPoint" (type: MOUSE, id 16)
[    40.757] (**) Option "AccelerationScheme" "none"
[    40.757] (**) TPPS/2 Elan TrackPoint: (accel) selected scheme none/0
[    40.757] (**) TPPS/2 Elan TrackPoint: (accel) acceleration factor: 2.000
[    40.757] (**) TPPS/2 Elan TrackPoint: (accel) acceleration threshold: 4
[    40.761] (II) event16 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[    40.762] (II) event16 - TPPS/2 Elan TrackPoint: device is a pointer
[    40.767] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/mouse1)
[    40.767] (II) No input driver specified, ignoring this device.
[    40.767] (II) This device may have been added with another device file.
[    40.768] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    40.768] (II) No input driver specified, ignoring this device.
[    40.768] (II) This device may have been added with another device file.
[    40.770] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[    40.770] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    40.770] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    40.770] (**) ThinkPad Extra Buttons: always reports core events
[    40.770] (**) Option "Device" "/dev/input/event5"
[    40.770] (**) Option "_source" "server/udev"
[    40.773] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    40.773] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[    40.774] (II) event5  - ThinkPad Extra Buttons: device removed
[    40.810] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[    40.810] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[    40.813] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    40.814] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[    40.826] (**) Logitech K800: Applying InputClass "libinput keyboard catchall"
[    40.826] (II) Using input driver 'libinput' for 'Logitech K800'
[    40.826] (**) Logitech K800: always reports core events
[    40.826] (**) Option "Device" "/dev/input/event19"
[    40.826] (**) Option "_source" "_driver/libinput"
[    40.826] (II) libinput: Logitech K800: is a virtual subdevice
[    40.827] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:406E.0007/input/input37/event19"
[    40.827] (II) XINPUT: Adding extended input device "Logitech K800" (type: KEYBOARD, id 18)
[    40.828] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): connected
[    40.828] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): Internal DisplayPort
[    40.828] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): 2660.0 MHz maximum pixel clock
[    40.828] (--) NVIDIA(GPU-0): 
[    48.910] (II) event2  - Power Button: device removed
[    48.943] (II) event3  - Video Bus: device removed
[    48.970] (II) event0  - Sleep Button: device removed
[    48.997] (II) event17 - Logitech M325: device removed
[    49.050] (II) event23 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device removed
[    49.103] (II) event18 - Integrated Camera: Integrated C: device removed
[    49.157] (II) event22 - Integrated Camera: Integrated I: device removed
[    49.210] (II) event4  - AT Translated Set 2 keyboard: device removed
[    49.237] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[    49.290] (II) event16 - TPPS/2 Elan TrackPoint: device removed
[    49.343] (II) event5  - ThinkPad Extra Buttons: device removed
[    49.370] (II) event19 - Logitech K800: device removed
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.469] (II) UnloadModule: "libinput"
[   168.568] (II) NVIDIA(GPU-0): Deleting GPU-0
[   168.569] (II) Server terminated successfully (0). Closing log file.

Xorg.1.log :

[   182.295] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   182.295] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[   182.295] Build Operating System: Linux Arch Linux
[   182.295] Current Operating System: Linux pcarch 5.6.13-arch1-1 #1 SMP PREEMPT Thu, 14 May 2020 06:52:53 +0000 x86_64
[   182.295] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/nvme0n1p7
[   182.295] Build Date: 05 May 2020  05:08:17AM
[   182.295]  
[   182.295] Current version of pixman: 0.40.0
[   182.295] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   182.295] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   182.295] (==) Log file: "/var/log/Xorg.1.log", Time: Sat May 23 17:17:37 2020
[   182.295] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   182.296] (==) No Layout section.  Using the first Screen section.
[   182.296] (==) No screen section available. Using defaults.
[   182.296] (**) |-->Screen "Default Screen Section" (0)
[   182.296] (**) |   |-->Monitor "<default monitor>"
[   182.296] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   182.296] (==) Automatically adding devices
[   182.296] (==) Automatically enabling devices
[   182.296] (==) Automatically adding GPU devices
[   182.296] (==) Automatically binding GPU devices
[   182.296] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   182.296] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   182.296] 	Entry deleted from font path.
[   182.296] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   182.296] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   182.296] 	Entry deleted from font path.
[   182.296] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   182.296] 	Entry deleted from font path.
[   182.296] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   182.296] 	Entry deleted from font path.
[   182.296] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   182.296] (==) ModulePath set to "/usr/lib/xorg/modules"
[   182.296] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   182.296] (II) Module ABI versions:
[   182.296] 	X.Org ANSI C Emulation: 0.4
[   182.296] 	X.Org Video Driver: 24.1
[   182.296] 	X.Org XInput driver : 24.1
[   182.296] 	X.Org Server Extension : 10.0
[   182.296] (++) using VT number 2

[   182.298] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_34
[   182.298] (II) xfree86: Adding drm device (/dev/dri/card0)
[   182.298] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   182.299] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   182.300] (--) PCI:*(1@0:0:0) 10de:1f91:17aa:229f rev 161, Mem @ 0xed000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[   182.300] (II) Open ACPI successful (/var/run/acpid.socket)
[   182.300] (II) LoadModule: "glx"
[   182.300] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   182.301] (II) Module glx: vendor="X.Org Foundation"
[   182.301] 	compiled for 1.20.8, module version = 1.0.0
[   182.301] 	ABI class: X.Org Server Extension, version 10.0
[   182.301] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[   182.301] 	loading driver: nvidia
[   182.301] (==) Matched nvidia as autoconfigured driver 0
[   182.301] (==) Matched nouveau as autoconfigured driver 1
[   182.301] (==) Matched nv as autoconfigured driver 2
[   182.301] (==) Matched modesetting as autoconfigured driver 3
[   182.301] (==) Matched fbdev as autoconfigured driver 4
[   182.301] (==) Matched vesa as autoconfigured driver 5
[   182.301] (==) Assigned the driver to the xf86ConfigLayout
[   182.301] (II) LoadModule: "nvidia"
[   182.301] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   182.301] (II) Module nvidia: vendor="NVIDIA Corporation"
[   182.301] 	compiled for 1.6.99.901, module version = 1.0.0
[   182.301] 	Module class: X.Org Video Driver
[   182.301] (II) LoadModule: "nouveau"
[   182.301] (WW) Warning, couldn't open module nouveau
[   182.301] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   182.301] (II) LoadModule: "nv"
[   182.301] (WW) Warning, couldn't open module nv
[   182.301] (EE) Failed to load module "nv" (module does not exist, 0)
[   182.301] (II) LoadModule: "modesetting"
[   182.301] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   182.302] (II) Module modesetting: vendor="X.Org Foundation"
[   182.302] 	compiled for 1.20.8, module version = 1.20.8
[   182.302] 	Module class: X.Org Video Driver
[   182.302] 	ABI class: X.Org Video Driver, version 24.1
[   182.302] (II) LoadModule: "fbdev"
[   182.302] (WW) Warning, couldn't open module fbdev
[   182.302] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   182.302] (II) LoadModule: "vesa"
[   182.302] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   182.302] (II) Module vesa: vendor="X.Org Foundation"
[   182.302] 	compiled for 1.20.8, module version = 2.4.0
[   182.302] 	Module class: X.Org Video Driver
[   182.302] 	ABI class: X.Org Video Driver, version 24.1
[   182.302] (II) NVIDIA dlloader X Driver  440.82  Wed Apr  1 19:50:17 UTC 2020
[   182.302] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   182.302] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   182.302] (II) VESA: driver for VESA chipsets: vesa
[   182.302] (II) systemd-logind: releasing fd for 226:0
[   182.302] (II) Loading sub module "fb"
[   182.302] (II) LoadModule: "fb"
[   182.302] (II) Loading /usr/lib/xorg/modules/libfb.so
[   182.302] (II) Module fb: vendor="X.Org Foundation"
[   182.302] 	compiled for 1.20.8, module version = 1.0.0
[   182.302] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   182.302] (II) Loading sub module "wfb"
[   182.302] (II) LoadModule: "wfb"
[   182.303] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   182.303] (II) Module wfb: vendor="X.Org Foundation"
[   182.303] 	compiled for 1.20.8, module version = 1.0.0
[   182.303] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   182.303] (II) Loading sub module "ramdac"
[   182.303] (II) LoadModule: "ramdac"
[   182.303] (II) Module "ramdac" already built-in
[   182.303] (WW) Falling back to old probe method for modesetting
[   182.303] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   182.303] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   182.303] (==) NVIDIA(0): RGB weight 888
[   182.303] (==) NVIDIA(0): Default visual is TrueColor
[   182.303] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   182.303] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[   182.303] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   182.303] (**) NVIDIA(0): Enabling 2D acceleration
[   182.303] (II) Loading sub module "glxserver_nvidia"
[   182.303] (II) LoadModule: "glxserver_nvidia"
[   182.303] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   182.307] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   182.307] 	compiled for 1.6.99.901, module version = 1.0.0
[   182.307] 	Module class: X.Org Server Extension
[   182.307] (II) NVIDIA GLX Module  440.82  Wed Apr  1 19:47:36 UTC 2020
[   182.307] (II) NVIDIA: The X server supports PRIME Render Offload.
[   182.308] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   182.308] (--) NVIDIA(0):     DFP-0
[   182.308] (--) NVIDIA(0):     DFP-1
[   182.308] (--) NVIDIA(0):     DFP-2
[   182.308] (--) NVIDIA(0):     DFP-3 (boot)
[   182.310] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1650 with Max-Q Design (TU117-A) at
[   182.310] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[   182.310] (--) NVIDIA(0): Memory: 4194304 kBytes
[   182.310] (--) NVIDIA(0): VideoBIOS: 90.17.31.00.26
[   182.310] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   182.310] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   182.310] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   182.310] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   182.310] (--) NVIDIA(GPU-0): 
[   182.310] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   182.310] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[   182.310] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[   182.310] (--) NVIDIA(GPU-0): 
[   182.339] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): connected
[   182.339] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): Internal TMDS
[   182.339] (--) NVIDIA(GPU-0): Acer K242HQL (DFP-2): 600.0 MHz maximum pixel clock
[   182.339] (--) NVIDIA(GPU-0): 
[   182.340] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): connected
[   182.340] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): Internal DisplayPort
[   182.340] (--) NVIDIA(GPU-0): BOE Technology Group Co., Ltd (DFP-3): 2660.0 MHz maximum pixel clock
[   182.340] (--) NVIDIA(GPU-0): 
[   182.368] (==) NVIDIA(0): 
[   182.368] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   182.368] (==) NVIDIA(0):     will be used as the requested mode.
[   182.368] (==) NVIDIA(0): 
[   182.368] (II) NVIDIA(0): Validated MetaModes:
[   182.368] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select,DFP-2:nvidia-auto-select"
[   182.368] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[   182.379] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
[   182.379] (--) NVIDIA(0):     option
[   182.379] (II) UnloadModule: "modesetting"
[   182.379] (II) Unloading modesetting
[   182.379] (II) UnloadModule: "vesa"
[   182.379] (II) Unloading vesa
[   182.380] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[   182.380] (II) NVIDIA:     access.
[   182.419] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select,DFP-2:nvidia-auto-select"
[   184.240] (==) NVIDIA(0): Disabling shared memory pixmaps
[   184.240] (==) NVIDIA(0): Backing store enabled
[   184.240] (==) NVIDIA(0): Silken mouse disabled
[   184.240] (==) NVIDIA(0): DPMS enabled
[   184.240] (II) Loading sub module "dri2"
[   184.240] (II) LoadModule: "dri2"
[   184.240] (II) Module "dri2" already built-in
[   184.240] (II) NVIDIA(0): [DRI2] Setup complete
[   184.240] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   184.240] (II) Initializing extension Generic Event Extension
[   184.240] (II) Initializing extension SHAPE
[   184.240] (II) Initializing extension MIT-SHM
[   184.240] (II) Initializing extension XInputExtension
[   184.240] (II) Initializing extension XTEST
[   184.240] (II) Initializing extension BIG-REQUESTS
[   184.240] (II) Initializing extension SYNC
[   184.240] (II) Initializing extension XKEYBOARD
[   184.240] (II) Initializing extension XC-MISC
[   184.240] (II) Initializing extension SECURITY
[   184.240] (II) Initializing extension XFIXES
[   184.240] (II) Initializing extension RENDER
[   184.240] (II) Initializing extension RANDR
[   184.240] (II) Initializing extension COMPOSITE
[   184.240] (II) Initializing extension DAMAGE
[   184.240] (II) Initializing extension MIT-SCREEN-SAVER
[   184.240] (II) Initializing extension DOUBLE-BUFFER
[   184.240] (II) Initializing extension RECORD
[   184.240] (II) Initializing extension DPMS
[   184.240] (II) Initializing extension Present
[   184.240] (II) Initializing extension DRI3
[   184.240] (II) Initializing extension X-Resource
[   184.240] (II) Initializing extension XVideo
[   184.240] (II) Initializing extension XVideo-MotionCompensation
[   184.240] (II) Initializing extension GLX
[   184.240] (II) Initializing extension GLX
[   184.240] (II) Indirect GLX disabled.
[   184.240] (II) GLX: Another vendor is already registered for screen 0
[   184.240] (II) Initializing extension XFree86-VidModeExtension
[   184.240] (II) Initializing extension XFree86-DGA
[   184.240] (II) Initializing extension XFree86-DRI
[   184.240] (II) Initializing extension DRI2
[   184.240] (II) Initializing extension NV-GLX
[   184.240] (II) Initializing extension NV-CONTROL
[   184.240] (II) Initializing extension XINERAMA
[   184.281] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   184.281] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   184.281] (II) LoadModule: "libinput"
[   184.282] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   184.282] (II) Module libinput: vendor="X.Org Foundation"
[   184.282] 	compiled for 1.20.8, module version = 0.30.0
[   184.282] 	Module class: X.Org XInput Driver
[   184.282] 	ABI class: X.Org XInput driver, version 24.1
[   184.282] (II) Using input driver 'libinput' for 'Power Button'
[   184.283] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[   184.283] (**) Power Button: always reports core events
[   184.283] (**) Option "Device" "/dev/input/event2"
[   184.283] (**) Option "_source" "server/udev"
[   184.284] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   184.284] (II) event2  - Power Button: device is a keyboard
[   184.284] (II) event2  - Power Button: device removed
[   184.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   184.284] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   184.285] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   184.285] (II) event2  - Power Button: device is a keyboard
[   184.285] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[   184.285] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   184.285] (II) Using input driver 'libinput' for 'Video Bus'
[   184.286] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 37 paused 0
[   184.286] (**) Video Bus: always reports core events
[   184.286] (**) Option "Device" "/dev/input/event3"
[   184.286] (**) Option "_source" "server/udev"
[   184.286] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   184.286] (II) event3  - Video Bus: device is a keyboard
[   184.287] (II) event3  - Video Bus: device removed
[   184.287] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3/event3"
[   184.287] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   184.287] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   184.287] (II) event3  - Video Bus: device is a keyboard
[   184.288] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   184.288] (II) No input driver specified, ignoring this device.
[   184.288] (II) This device may have been added with another device file.
[   184.288] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   184.288] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   184.288] (II) Using input driver 'libinput' for 'Sleep Button'
[   184.288] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 38 paused 0
[   184.288] (**) Sleep Button: always reports core events
[   184.288] (**) Option "Device" "/dev/input/event0"
[   184.288] (**) Option "_source" "server/udev"
[   184.289] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   184.289] (II) event0  - Sleep Button: device is a keyboard
[   184.289] (II) event0  - Sleep Button: device removed
[   184.289] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   184.289] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   184.290] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   184.290] (II) event0  - Sleep Button: device is a keyboard
[   184.290] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[   184.290] (II) No input driver specified, ignoring this device.
[   184.290] (II) This device may have been added with another device file.
[   184.290] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[   184.290] (II) No input driver specified, ignoring this device.
[   184.290] (II) This device may have been added with another device file.
[   184.291] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[   184.291] (II) No input driver specified, ignoring this device.
[   184.291] (II) This device may have been added with another device file.
[   184.291] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event11)
[   184.291] (II) No input driver specified, ignoring this device.
[   184.291] (II) This device may have been added with another device file.
[   184.291] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event12)
[   184.291] (II) No input driver specified, ignoring this device.
[   184.291] (II) This device may have been added with another device file.
[   184.291] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[   184.291] (II) No input driver specified, ignoring this device.
[   184.291] (II) This device may have been added with another device file.
[   184.292] (II) config/udev: Adding input device Logitech M325 (/dev/input/event17)
[   184.292] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[   184.292] (II) Using input driver 'libinput' for 'Logitech M325'
[   184.292] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 39 paused 0
[   184.292] (**) Logitech M325: always reports core events
[   184.292] (**) Option "Device" "/dev/input/event17"
[   184.292] (**) Option "_source" "server/udev"
[   184.293] (II) event17 - Logitech M325: is tagged by udev as: Mouse
[   184.293] (II) event17 - Logitech M325: device set to 600 DPI
[   184.293] (II) event17 - Logitech M325: device is a pointer
[   184.293] (II) event17 - Logitech M325: device removed
[   184.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input36/event17"
[   184.293] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 9)
[   184.294] (**) Option "AccelerationScheme" "none"
[   184.294] (**) Logitech M325: (accel) selected scheme none/0
[   184.294] (**) Logitech M325: (accel) acceleration factor: 2.000
[   184.294] (**) Logitech M325: (accel) acceleration threshold: 4
[   184.295] (II) event17 - Logitech M325: is tagged by udev as: Mouse
[   184.295] (II) event17 - Logitech M325: device set to 600 DPI
[   184.295] (II) event17 - Logitech M325: device is a pointer
[   184.295] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse2)
[   184.295] (II) No input driver specified, ignoring this device.
[   184.295] (II) This device may have been added with another device file.
[   184.296] (II) config/udev: Adding input device Logitech K800 (/dev/input/event18)
[   184.296] (**) Logitech K800: Applying InputClass "libinput keyboard catchall"
[   184.296] (II) Using input driver 'libinput' for 'Logitech K800'
[   184.296] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 40 paused 0
[   184.296] (**) Logitech K800: always reports core events
[   184.296] (**) Option "Device" "/dev/input/event18"
[   184.296] (**) Option "_source" "server/udev"
[   184.297] (II) event18 - Logitech K800: is tagged by udev as: Keyboard
[   184.297] (II) event18 - Logitech K800: device is a keyboard
[   184.297] (II) event18 - Logitech K800: device removed
[   184.297] (II) libinput: Logitech K800: needs a virtual subdevice
[   184.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:406E.0007/input/input37/event18"
[   184.297] (II) XINPUT: Adding extended input device "Logitech K800" (type: MOUSE, id 10)
[   184.298] (**) Option "AccelerationScheme" "none"
[   184.298] (**) Logitech K800: (accel) selected scheme none/0
[   184.298] (**) Logitech K800: (accel) acceleration factor: 2.000
[   184.298] (**) Logitech K800: (accel) acceleration threshold: 4
[   184.298] (II) event18 - Logitech K800: is tagged by udev as: Keyboard
[   184.299] (II) event18 - Logitech K800: device is a keyboard
[   184.299] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 100 Gaming Mouse (/dev/input/event22)
[   184.299] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[   184.299] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Rival 100 Gaming Mouse'
[   184.356] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 41 paused 0
[   184.356] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: always reports core events
[   184.356] (**) Option "Device" "/dev/input/event22"
[   184.356] (**) Option "_source" "server/udev"
[   184.358] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: is tagged by udev as: Mouse
[   184.358] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device is a pointer
[   184.359] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device removed
[   184.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:1038:1702.0005/input/input24/event22"
[   184.359] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Rival 100 Gaming Mouse" (type: MOUSE, id 11)
[   184.359] (**) Option "AccelerationScheme" "none"
[   184.359] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) selected scheme none/0
[   184.359] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) acceleration factor: 2.000
[   184.359] (**) SteelSeries SteelSeries Rival 100 Gaming Mouse: (accel) acceleration threshold: 4
[   184.360] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: is tagged by udev as: Mouse
[   184.361] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device is a pointer
[   184.362] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 100 Gaming Mouse (/dev/input/mouse3)
[   184.362] (II) No input driver specified, ignoring this device.
[   184.362] (II) This device may have been added with another device file.
[   184.362] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event21)
[   184.362] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[   184.362] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[   184.363] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 42 paused 0
[   184.363] (**) Integrated Camera: Integrated C: always reports core events
[   184.363] (**) Option "Device" "/dev/input/event21"
[   184.363] (**) Option "_source" "server/udev"
[   184.365] (II) event21 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[   184.365] (II) event21 - Integrated Camera: Integrated C: device is a keyboard
[   184.365] (II) event21 - Integrated Camera: Integrated C: device removed
[   184.365] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input23/event21"
[   184.365] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 12)
[   184.367] (II) event21 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[   184.367] (II) event21 - Integrated Camera: Integrated C: device is a keyboard
[   184.368] (II) config/udev: Adding input device Integrated Camera: Integrated I (/dev/input/event23)
[   184.368] (**) Integrated Camera: Integrated I: Applying InputClass "libinput keyboard catchall"
[   184.368] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated I'
[   184.369] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 43 paused 0
[   184.369] (**) Integrated Camera: Integrated I: always reports core events
[   184.369] (**) Option "Device" "/dev/input/event23"
[   184.369] (**) Option "_source" "server/udev"
[   184.370] (II) event23 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[   184.370] (II) event23 - Integrated Camera: Integrated I: device is a keyboard
[   184.371] (II) event23 - Integrated Camera: Integrated I: device removed
[   184.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/input/input25/event23"
[   184.371] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated I" (type: KEYBOARD, id 13)
[   184.372] (II) event23 - Integrated Camera: Integrated I: is tagged by udev as: Keyboard
[   184.372] (II) event23 - Integrated Camera: Integrated I: device is a keyboard
[   184.373] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[   184.373] (II) No input driver specified, ignoring this device.
[   184.373] (II) This device may have been added with another device file.
[   184.374] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[   184.374] (II) No input driver specified, ignoring this device.
[   184.374] (II) This device may have been added with another device file.
[   184.374] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   184.374] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   184.374] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   184.375] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 44 paused 0
[   184.375] (**) AT Translated Set 2 keyboard: always reports core events
[   184.375] (**) Option "Device" "/dev/input/event4"
[   184.375] (**) Option "_source" "server/udev"
[   184.376] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   184.376] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   184.377] (II) event4  - AT Translated Set 2 keyboard: device removed
[   184.377] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   184.377] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[   184.379] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   184.379] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[   184.380] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[   184.380] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   184.380] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   184.381] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 45 paused 0
[   184.381] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   184.381] (**) Option "Device" "/dev/input/event15"
[   184.381] (**) Option "_source" "server/udev"
[   184.382] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   184.383] (II) event15 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[   184.384] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   184.384] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[   184.385] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[   184.385] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[   184.386] (**) Option "AccelerationScheme" "none"
[   184.386] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   184.386] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   184.386] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   184.387] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[   184.388] (II) event15 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[   184.389] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   184.390] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   184.390] (II) No input driver specified, ignoring this device.
[   184.390] (II) This device may have been added with another device file.
[   184.390] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/event16)
[   184.390] (**) TPPS/2 Elan TrackPoint: Applying InputClass "libinput pointer catchall"
[   184.391] (II) Using input driver 'libinput' for 'TPPS/2 Elan TrackPoint'
[   184.391] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 46 paused 0
[   184.391] (**) TPPS/2 Elan TrackPoint: always reports core events
[   184.391] (**) Option "Device" "/dev/input/event16"
[   184.391] (**) Option "_source" "server/udev"
[   184.393] (II) event16 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[   184.393] (II) event16 - TPPS/2 Elan TrackPoint: device is a pointer
[   184.394] (II) event16 - TPPS/2 Elan TrackPoint: device removed
[   184.394] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event16"
[   184.394] (II) XINPUT: Adding extended input device "TPPS/2 Elan TrackPoint" (type: MOUSE, id 16)
[   184.394] (**) Option "AccelerationScheme" "none"
[   184.394] (**) TPPS/2 Elan TrackPoint: (accel) selected scheme none/0
[   184.394] (**) TPPS/2 Elan TrackPoint: (accel) acceleration factor: 2.000
[   184.394] (**) TPPS/2 Elan TrackPoint: (accel) acceleration threshold: 4
[   184.395] (II) event16 - TPPS/2 Elan TrackPoint: is tagged by udev as: Mouse Pointingstick
[   184.396] (II) event16 - TPPS/2 Elan TrackPoint: device is a pointer
[   184.397] (II) config/udev: Adding input device TPPS/2 Elan TrackPoint (/dev/input/mouse1)
[   184.397] (II) No input driver specified, ignoring this device.
[   184.397] (II) This device may have been added with another device file.
[   184.397] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   184.397] (II) No input driver specified, ignoring this device.
[   184.397] (II) This device may have been added with another device file.
[   184.398] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[   184.398] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[   184.398] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[   184.399] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 47 paused 0
[   184.399] (**) ThinkPad Extra Buttons: always reports core events
[   184.399] (**) Option "Device" "/dev/input/event5"
[   184.399] (**) Option "_source" "server/udev"
[   184.399] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[   184.399] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[   184.400] (II) event5  - ThinkPad Extra Buttons: device removed
[   184.400] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[   184.400] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[   184.401] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[   184.401] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[   184.404] (**) Logitech K800: Applying InputClass "libinput keyboard catchall"
[   184.404] (II) Using input driver 'libinput' for 'Logitech K800'
[   184.404] (II) systemd-logind: returning pre-existing fd for /dev/input/event18 13:82
[   184.404] (**) Logitech K800: always reports core events
[   184.404] (**) Option "Device" "/dev/input/event18"
[   184.404] (**) Option "_source" "_driver/libinput"
[   184.404] (II) libinput: Logitech K800: is a virtual subdevice
[   184.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:406E.0007/input/input37/event18"
[   184.404] (II) XINPUT: Adding extended input device "Logitech K800" (type: KEYBOARD, id 18)
[   229.982] (**) Option "fd" "34"
[   229.982] (II) event2  - Power Button: device removed
[   229.982] (**) Option "fd" "37"
[   229.982] (II) event3  - Video Bus: device removed
[   229.982] (**) Option "fd" "38"
[   229.982] (II) event0  - Sleep Button: device removed
[   229.982] (**) Option "fd" "39"
[   229.982] (II) event17 - Logitech M325: device removed
[   229.982] (**) Option "fd" "40"
[   229.982] (**) Option "fd" "41"
[   229.982] (II) event22 - SteelSeries SteelSeries Rival 100 Gaming Mouse: device removed
[   229.983] (**) Option "fd" "42"
[   229.983] (II) event21 - Integrated Camera: Integrated C: device removed
[   229.983] (**) Option "fd" "43"
[   229.983] (II) event23 - Integrated Camera: Integrated I: device removed
[   229.983] (**) Option "fd" "44"
[   229.983] (II) event4  - AT Translated Set 2 keyboard: device removed
[   229.983] (**) Option "fd" "45"
[   229.983] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[   229.983] (**) Option "fd" "46"
[   229.983] (II) event16 - TPPS/2 Elan TrackPoint: device removed
[   229.983] (**) Option "fd" "47"
[   229.983] (II) event5  - ThinkPad Extra Buttons: device removed
[   229.983] (**) Option "fd" "40"
[   229.983] (II) event18 - Logitech K800: device removed
[   229.987] (II) UnloadModule: "libinput"
[   229.987] (II) systemd-logind: not releasing fd for 13:82, still in use
[   229.987] (II) UnloadModule: "libinput"
[   229.987] (II) systemd-logind: releasing fd for 13:69
[   230.019] (II) UnloadModule: "libinput"
[   230.019] (II) systemd-logind: releasing fd for 13:80
[   230.052] (II) UnloadModule: "libinput"
[   230.052] (II) systemd-logind: releasing fd for 13:79
[   230.116] (II) UnloadModule: "libinput"
[   230.116] (II) systemd-logind: releasing fd for 13:68
[   230.143] (II) UnloadModule: "libinput"
[   230.143] (II) systemd-logind: releasing fd for 13:87
[   230.183] (II) UnloadModule: "libinput"
[   230.183] (II) systemd-logind: releasing fd for 13:85
[   230.249] (II) UnloadModule: "libinput"
[   230.249] (II) systemd-logind: releasing fd for 13:86
[   230.329] (II) UnloadModule: "libinput"
[   230.329] (II) systemd-logind: releasing fd for 13:82
[   230.356] (II) UnloadModule: "libinput"
[   230.356] (II) systemd-logind: releasing fd for 13:81
[   230.423] (II) UnloadModule: "libinput"
[   230.423] (II) systemd-logind: releasing fd for 13:64
[   230.449] (II) UnloadModule: "libinput"
[   230.449] (II) systemd-logind: releasing fd for 13:67
[   230.477] (II) UnloadModule: "libinput"
[   230.477] (II) systemd-logind: releasing fd for 13:66
[   232.511] (II) NVIDIA(GPU-0): Deleting GPU-0
[   232.511] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   232.511] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   232.511] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   232.512] (II) Server terminated successfully (0). Closing log file.

Offline

#30 2020-05-23 21:03:20

loqs
Member
Registered: 2014-03-06
Posts: 10,578

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

In the default /etc/lightdm/lightdm.conf there is a line:

session-wrapper=/etc/lightdm/Xsession

Which would transform

[+10.84s] DEBUG: Session pid=611: Running command lightdm-session dwm

to

[+10.84s] DEBUG: Session pid=611: Running command  /etc/lightdm/Xsession dwm

That line appears to be missing on your system.
Edit:
Current default lightdm.conf with comments removed

[LightDM]
run-directory=/run/lightdm

[Seat:*]
session-wrapper=/etc/lightdm/Xsession

[XDMCPServer]

[VNCServer]

Last edited by loqs (2020-05-23 21:21:04)

Offline

#31 2020-05-23 21:46:28

loubi
Member
Registered: 2020-05-22
Posts: 19

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

Wow, thanks for your edit: I was about to post how it still didn't work, but putting this option at the right place ([Seat:*]) make it work. Thats so cool, and dwm show up so fast !
Still have to adjust locales and this intempestive standby when booting on my external monitor only, but it may be out the bounds of this thread, isn't it ?

Edit: I think using localctl will quickly resolve this issue but I don't understand why the process described in the guide isn't enough ?

If you have some advice about log to look at for the "standby" issue, I would be more grateful than ever, if it wasn't the case yet !

Last edited by loubi (2020-05-23 21:57:08)

Offline

#32 2020-05-23 23:00:22

seth
Member
Registered: 2012-09-03
Posts: 14,795

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

I don't understand why the process described in the guide isn't enough ?

What process described where exactly?

If you have some advice about log to look at for the "standby" issue,

System journal after/of such boot, but please open a new thread on this (providing the relevant journal) - there's a general "one issue per thread" rule.

Offline

#33 2020-05-23 23:23:58

loubi
Member
Registered: 2020-05-22
Posts: 19

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

Ok I think I have finally understood.
Setting the locale.gen and stuff are available for tty only, while for X some more configuration are requested. At least, this is what I guessed.
Running "localectl set-x11-keymaps layout" was needed to create persistent graphical configuration under /etc/X11/xorg.conf.d/00-keyboard.conf.

For my second issue, the answer was here : https://wiki.archlinux.org/index.php/Po … CPI_events

Thanks a lot Seth and Loqs, I learned a lot with you.

Offline

#34 2020-05-23 23:27:56

seth
Member
Registered: 2012-09-03
Posts: 14,795

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

"locale.gen and stuff" are for the locale, ie. the language of outputs and interfaces, also some sorting, unit delimiters, ...
They're not abot your keyboard at all.

vconsole.conf configures the console keymap, but does not affect X11 - as I mentioned in https://bbs.archlinux.org/viewtopic.php … 2#p1906402 ;-)

Offline

#35 2020-05-23 23:48:15

loubi
Member
Registered: 2020-05-22
Posts: 19

Re: [SOLVED] Lightdm loop / No greeter / bad layout / Boot stuck

Thanks for the precision

Offline

Board footer

Powered by FluxBB