You are not logged in.
After I finished updating my laptop, suddenly my USB wifi adapter is not showing up on either KDE NetworkManager applet or ip link. Here is the output of dmesg:
[Jun30 11:04] usb 1-4: new high-speed USB device number 12 using xhci_hcd
[ +0.160470] usb 1-4: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[ +0.000003] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ +0.000002] usb 1-4: Product: USB2.0 WLAN
[ +0.000002] usb 1-4: Manufacturer: ATHEROS
[ +0.000001] usb 1-4: SerialNumber: 12345
[ +0.002315] usb 1-4: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ +0.280912] usb 1-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ +0.251880] ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits then there is nothing in dmesg after that. Here is the output of ip link:
minato@konoha ~ [SIGINT]> ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether d8:cb:8a:84:4e:73 brd ff:ff:ff:ff:ff:ff
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
link/ether 02:42:e2:cb:0a:8b brd ff:ff:ff:ff:ff:ff To rule out that the adapter is broken, I plugged this into my Ubuntu 20.04 LTS computer and it works just fine, and here is the dmesg output:
[ +20.842585] usb 1-1: new high-speed USB device number 45 using xhci_hcd
[ +0.164627] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[ +0.000006] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ +0.000003] usb 1-1: Product: USB2.0 WLAN
[ +0.000003] usb 1-1: Manufacturer: ATHEROS
[ +0.000003] usb 1-1: SerialNumber: 12345
[ +0.090494] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ +0.000035] usbcore: registered new interface driver ath9k_htc
[ +0.287235] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ +0.251728] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ +0.264254] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[ +0.000006] ath9k_htc 1-1:1.0: FW RMW support: On
[ +0.000005] ath: EEPROM regdomain: 0x809c
[ +0.000001] ath: EEPROM indicates we should expect a country code
[ +0.000003] ath: doing EEPROM country->regdmn map search
[ +0.000002] ath: country maps to regdmn code: 0x52
[ +0.000003] ath: Country alpha2 being used: CN
[ +0.000002] ath: Regpair used: 0x52
[ +0.005933] ieee80211 phy1: Atheros AR9271 Rev:1
[ +0.018219] ath9k_htc 1-1:1.0 wlxe8de271a9f72: renamed from wlan0
[ +1.990613] wlxe8de271a9f72: authenticate with bc:30:d9:ba:ad:95
[ +0.170584] wlxe8de271a9f72: send auth to bc:30:d9:ba:ad:95 (try 1/3)
[ +0.001671] wlxe8de271a9f72: authenticated
[ +0.002546] wlxe8de271a9f72: associate with bc:30:d9:ba:ad:95 (try 1/3)
[ +0.006130] wlxe8de271a9f72: RX AssocResp from bc:30:d9:ba:ad:95 (capab=0x1411 status=0 aid=1)
[ +0.008523] wlxe8de271a9f72: associated
[ +0.035977] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe8de271a9f72: link becomes readyEDIT: If I use
Bus 001 Device 009: ID 148f:5372 Ralink Technology, Corp. RT5372 Wireless Adapter wifi works just fine
EDIT2: Latest kernel breaks TL-WN722N support, more info at this link: https://bbs.archlinux.org/viewtopic.php?id=256977
Last edited by minecraft2048 (2020-06-30 03:54:37)
Offline
Offline
Thanks for the link, can someone close this thread?
Offline
You can marked it solved by editing your first post and prepending [SOLVED] to the title or you can use the Report link to request a moderator delete the topic.
Offline