You are not logged in.
Hi guys,
I browsed the forum and I already tried all the suggestions I found... no chance.
My USB mic :
- it works perfectly with sound recorder or audacity applications.
- it is detected by Pulseaudio.
- it is set as fallback.
but still does not work in CS:GO.
I already changed the USB connection port without success.
Do you have some ideas?
Last edited by Illogitech (2020-07-03 20:21:15)
Offline
sudo fuser -v /dev/snd/*
pacmd list-sources
pacmd list-source-outputs
during this? Post these in [ code ] [ /code ] tags without the spaces.
Last edited by V1del (2020-07-03 12:04:06)
Online
sudo fuser -v /dev/snd/* output:
alex@calcolatore ~> sudo fuser -v /dev/snd/*
[sudo] password di alex:
UTENTE PID ACCESSO COMANDO
/dev/snd/controlC0: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/controlC1: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/controlC2: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/pcmC0D0p: alex 806 F...m pulseaudio
pacmd list-sources output:
alex@calcolatore ~> pacmd list-sources
3 source(s) available.
* index: 0
name: <alsa_input.usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00.mono-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 68680 / 105% / 1,22 dB
balance 0,00
base volume: 44649 / 68% / -10,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 1 44100 Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 1 <alsa_card.usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Blue Snowball"
alsa.long_card_name = "BLUE MICROPHONE Blue Snowball at usb-0000:00:1a.0-1.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/sound/card2"
udev.id = "usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0005"
device.product.name = "Blue Snowball"
device.serial = "BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671"
device.string = "hw:2"
device.buffering.buffer_size = "176400"
device.buffering.fragment_size = "88200"
device.access_mode = "mmap+timer"
device.profile.name = "mono-fallback"
device.profile.description = "Mono"
device.description = "Blue Snowball Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0005"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microfono (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 2 KiB
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 2000,00 ms; range is 0,50 .. 2000,00 ms
monitor_of: 0
card: 2 <alsa_card.pci-0000_00_1b.0>
module: 8
properties:
device.description = "Monitor of Audio interno Stereo analogico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf9ff8000 irq 36"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 53744 / 82% / -5,17 dB, front-right: 53744 / 82% / -5,17 dB
balance 0,00
base volume: 6368 / 10% / -60,75 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 2 <alsa_card.pci-0000_00_1b.0>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1828S Analog"
alsa.id = "VT1828S Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf9ff8000 irq 36"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stereo analogico"
device.description = "Audio interno Stereo analogico"
alsa.mixer_name = "VIA VT1828S"
alsa.components = "HDA:11064441,104383d0,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Microfono anteriore (priority 8500, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Microfono posteriore (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line-In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-front-mic>
pacmd list-source-outputs output:
alex@calcolatore ~> pacmd list-source-outputs
0 source output(s) available.
Offline
You need to post these while trying to use the mic in CS:GO. By what measure does "doesn't work" show itself? If the above is indeed while attempting to use it you should check the terminal output of the game as right now it is not attempting to record anything at all.
Online
Sorry, I misunderstanding your suggestion. I just launched a CS:GO game without *using* the mic.
Here is the output while iusing the mic:
alex@calcolatore ~> sudo fuser -v /dev/snd/*
[sudo] password di alex:
UTENTE PID ACCESSO COMANDO
/dev/snd/controlC0: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/controlC1: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/controlC2: alex 768 F.... lxqt-panel
alex 806 F.... pulseaudio
/dev/snd/pcmC0D0p: alex 806 F...m pulseaudio
alex@calcolatore ~> pacmd list-sources
3 source(s) available.
* index: 0
name: <alsa_input.usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00.mono-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 68680 / 105% / 1,22 dB
balance 0,00
base volume: 44649 / 68% / -10,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 1 44100 Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 1 <alsa_card.usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Blue Snowball"
alsa.long_card_name = "BLUE MICROPHONE Blue Snowball at usb-0000:00:1a.0-1.2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/sound/card2"
udev.id = "usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0005"
device.product.name = "Blue Snowball"
device.serial = "BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671"
device.string = "hw:2"
device.buffering.buffer_size = "176400"
device.buffering.fragment_size = "88200"
device.access_mode = "mmap+timer"
device.profile.name = "mono-fallback"
device.profile.description = "Mono"
device.description = "Blue Snowball Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0005"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microfono (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 2 KiB
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 49,98 ms; range is 0,50 .. 2000,00 ms
monitor_of: 0
card: 2 <alsa_card.pci-0000_00_1b.0>
module: 8
properties:
device.description = "Monitor of Audio interno Stereo analogico"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf9ff8000 irq 36"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 53744 / 82% / -5,17 dB, front-right: 53744 / 82% / -5,17 dB
balance 0,00
base volume: 6368 / 10% / -60,75 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 0 KiB
sample spec: s16le ch 2 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
card: 2 <alsa_card.pci-0000_00_1b.0>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "VT1828S Analog"
alsa.id = "VT1828S Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xf9ff8000 irq 36"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stereo analogico"
device.description = "Audio interno Stereo analogico"
alsa.mixer_name = "VIA VT1828S"
alsa.components = "HDA:11064441,104383d0,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Microfono anteriore (priority 8500, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Microfono posteriore (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line-In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-front-mic>
alex@calcolatore ~> pacmd list-source-outputs
1 source output(s) available.
index: 27
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
source: 1 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 6,01 ms
requested latency: 49,98 ms
sample spec: s16le ch 1 22050 Hz
channel map: mono
Mono
resample method: speex-float-1
owner module: 11
client: 42 <csgo_linux64>
properties:
media.name = "Capture Stream"
application.name = "csgo_linux64"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.process.id = "2688"
application.process.user = "alex"
application.process.host = "calcolatore"
application.process.binary = "csgo_linux64"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "0b30b1e3e57a485680c85f36f21951bd"
application.process.session_id = "2"
module-stream-restore.id = "source-output-by-application-name:csgo_linux64"
Offline
index: 27
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
source: 1 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
It's currently recording from your desktop audio, so people on your team probably enjoy some tunes or annoying game echo, depending on what you are doing here
pacmd move-source-output 27 alsa_card.usb-BLUE_MICROPHONE_Blue_Snowball_797_2019_10_25_35671-00 #Pay attention to the 27 here and double check it's still that number
alternatively or maybe for the future you'll probably want to install pavucontrol which will intuitively show you wrong setups like this and allow you to move streams/outputs as you want.
Online
Solved with pavucontrol.
Is the setting permanent or should I reassign the source every time I restart CS:GO or my PC?
Many thanks!
Offline
It should/will remember that for the future.
Online