You are not logged in.
- Topics: Active | Unanswered
#1 2020-09-26 05:38:20
- makeshif7
- Member
- Registered: 2020-09-26
- Posts: 2
[Solved] No audio output through headphones
I swear this was working before upgrading to 5.8, but downgrading to 5.7 didn't seem to solve the issue. Internal audio's working fine but I can't seem to get audio working through headphones when they're plugged in. I've made sure that it's not muted through alsamixer. I can also see that the headphones are detected in both alsamixer and pavucontrol but no audio. Any help would be much appreciated.
$ uname -r
5.8.10-arch1-1cat /sys/devices/virtual/dmi/id/sys_vendor /sys/devices/virtual/dmi/id/product_name
ASUSTeK COMPUTER INC.
UX430UA$ pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 57.26 ms
max request: 14 KiB
max rewind: 14 KiB
monitor source: 0
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 75.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xef128000 irq 129"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d71"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "384000"
device.buffering.fragment_size = "192000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC295"
alsa.components = "HDA:10ec0295,10431740,00100002 HDA:8086280b,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>pacmd list-sink-inputs
1 sink input(s) available.
index: 2
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 0 <alsa_output.pci-0000_00_1f.3.analog-stereo>
volume: front-left: 44907 / 69% / -9.85 dB, front-right: 44907 / 69% / -9.85 dB
balance 0.00
muted: no
current latency: 90.67 ms
requested latency: 75.00 ms
sample spec: float32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 8
client: 1 <Firefox>
properties:
media.name = "AudioStream"
application.name = "Firefox"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "33"
application.process.id = "969"
application.process.user = "makeshif7"
application.process.host = "darthballs"
application.process.binary = "firefox"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "4465e6eb67274ac0858669c25a5a87c2"
application.process.session_id = "1"
application.icon_name = "firefox"
module-stream-restore.id = "sink-input-by-application-name:Firefox"pacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1f.3>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xef128000 irq 129"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d71"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "DELL U2715H"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"Last edited by makeshif7 (2020-09-27 02:41:48)
Offline
#2 2020-09-26 11:24:39
- mkkot
- Member
- From: Poland
- Registered: 2009-12-20
- Posts: 288
Re: [Solved] No audio output through headphones
USB or jack headphones? What model it is? Can you paste some screenshots from pavucontrol? Have you read:
https://wiki.archlinux.org/index.php/Pu … -Mute_Mode ?
Offline
#3 2020-09-26 15:20:49
- euromatlox
- Member
- Registered: 2017-02-10
- Posts: 123
Re: [Solved] No audio output through headphones
From another Linux site (Ubuntu):
pulseaudio -k && sudo alsa force-reloadThe first part kills pulseaudio, the second reloads ALSA. No need to restart pulseaudio, because it auto-restarts. There's also statement that sometimes you might need to clear pulse config with rm -R ~/.pulse.
Last edited by euromatlox (2020-09-26 15:24:03)
Offline
#4 2020-09-26 16:42:41
- Maikichiro
- Member
- Registered: 2020-09-26
- Posts: 1
Re: [Solved] No audio output through headphones
There was a commit introduced in 5.7.10 that changed ASUS default headphone model to headset mode with microphone.
To use headphones without microphone you need to change the HD-Audio Codec-Specific model.
See Correctly detect microphone plugged in a 4-pin 3.5mm (TRRS) jack
Create /etc/modprobe.d/alsa-base.conf with:
options snd_hda_intel index=0 model=headset-mode-no-hp-micYou may need to fully power off your computer for the change to take effect.
Offline
#5 2020-09-27 02:40:40
- makeshif7
- Member
- Registered: 2020-09-26
- Posts: 2
Re: [Solved] No audio output through headphones
@Maikichiro brilliant, that fixed it. Thanks!
Offline