You are not logged in.

#1 2006-09-09 06:44:05

curana
Member
From: Switzerland
Registered: 2006-04-14
Posts: 97
Website

2 Wireless nets connected but no server reachable

Hi,

I connected my 2 routers via wireless which works great. I can connect to the internet from my wired servers via the wireless connection. (Repeater function).

Looks like this:
PC1 |cable| ROUTER1 |air| ROUTER2 |cable| ADSL-Port
PC2 |cable| ROUTER1 |air| ROUTER2 |cable| ADSL-Port

Connection works from inside to outside, means I could do the ftp-install for PC1 and PC2 was already set up but can also ping to outside.

I set up the firewall of ROUTER1 to open specified ports and redirect them to the static IPs of PC1 and PC2 but I cant connect from outside. I cant check if my ROUTER1 can "find" PC1/2. Can I?

Do you have any hints why it might not work? I tried to find out via trace if I can check if the packets reach the second router but i dont know how. I really dont know what else to check...

Thanks for your help!

Offline

#2 2006-09-09 10:32:16

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 4,664

Re: 2 Wireless nets connected but no server reachable

In a setup like this usually  ROUTER 1 is NOT functioning as router, but as a bridge / repeater.

Try setting the port forwarding in ROUTER 2


Booting with apg Openrc, NOT systemd.
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#3 2006-09-10 12:06:26

curana
Member
From: Switzerland
Registered: 2006-04-14
Posts: 97
Website

Re: 2 Wireless nets connected but no server reachable

Thanks for the hint. I will try and report here...

Offline

#4 2006-09-10 14:25:47

curana
Member
From: Switzerland
Registered: 2006-04-14
Posts: 97
Website

Re: 2 Wireless nets connected but no server reachable

Works.

Great and thank you!

Offline

Board footer

Powered by FluxBB