You are not logged in.
On my Hp Zbook Studio G5 laptop, the (directional) internal microphone is not detected on boot.
When plugging in a set of earphones (with microphone) and unplugging it again, the microphone shows up
and works. When I restart pulseaudio, I have to do the same thing to get it working.
I have tried a few solutions I found on the forums:
- Installing sof-firmware and alsa-ucm-conf
- Setting `options snd-intel-dspcfg dsp_driver=1` in modprobe.d (before and after installing sof-firmaware)
- Setting `options snd_hda_intel dmic_detect=0` in modprobe.d
- Blacklisting snd_hda_intel (this disables all audio)
None of them seemed to work. Does anyone have something else I could try?
lsmod before plugging in earphones
https://pastebin.com/AbVWSVFC
lsmod after plugging in earphones
https://pastebin.com/2gzw4ShS
> arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: Generic Analog [Generic Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Edit: I found a solution. I put the following line in ~/.config/pulse/default.pa and it detected the microphone immidiately after boot.
load-module module-alsa-sink device=hw:0,0 channels=2 Edit2: This solution has caused other issues like audio not working at all
Last edited by TheStroyer (2021-10-03 12:33:55)
Offline