You are not logged in.

#1 2020-11-29 17:58:41

YuvarajVelmurugan
Member
Registered: 2020-11-23
Posts: 15

snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

I installed arch linux today in UEFI mode on my latest hardware. After installation i ran below commands to check if there are any errors and it does shows errors. kindly help.
journalctl -p 3 -xb

-- Logs begin at Sun 2020-11-29 14:50:27 IST, end at Sun 2020-11-29 23:02:10 IST. --
Nov 29 23:01:08 yuvi-pc kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20200717/psargs-330)
Nov 29 23:01:08 yuvi-pc kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
Nov 29 23:01:08 yuvi-pc kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20200717/psargs-330)
Nov 29 23:01:08 yuvi-pc kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
Nov 29 23:01:08 yuvi-pc kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20200717/psargs-330)
Nov 29 23:01:08 yuvi-pc kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
Nov 29 23:01:08 yuvi-pc kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20200717/psargs-330)
Nov 29 23:01:08 yuvi-pc kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT1._GTF due to previous error (AE_NOT_FOUND) (20200717/psparse-529)
Nov 29 23:01:12 yuvi-pc kernel: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]

lspci

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 06)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1d.2 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #11 (rev f0)
00:1d.3 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #12 (rev f0)
00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (B250)
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
05:00.0 PCI bridge: Integrated Technology Express, Inc. IT8892E PCIe to PCI Bridge (rev 71)

lspci -v

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 06)
        Subsystem: Gigabyte Technology Co., Ltd Device 5000
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=10 <?>
        Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04) (prog-if 00 [VGA controller])
        DeviceName:  Onboard IGD
        Subsystem: Gigabyte Technology Co., Ltd Device d000
        Flags: bus master, fast devsel, latency 0, IRQ 131
        Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        I/O ports at f000 [size=64]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [100] Process Address Space ID (PASID)
        Capabilities: [200] Address Translation Service (ATS)
        Capabilities: [300] Page Request Interface (PRI)
        Kernel driver in use: i915
        Kernel modules: i915

00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
        Subsystem: Gigabyte Technology Co., Ltd Device 5000
        Flags: fast devsel, IRQ 11
        Memory at f704e000 (64-bit, non-prefetchable) [disabled] [size=4K]
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [dc] Power Management version 2
        Capabilities: [f0] PCI Advanced Features

00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller (prog-if 30 [XHCI])
        Subsystem: Gigabyte Technology Co., Ltd Device 5007
        Flags: bus master, medium devsel, latency 0, IRQ 128
        Memory at f7030000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
        Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
        Subsystem: Gigabyte Technology Co., Ltd Device 1c3a
        Flags: bus master, fast devsel, latency 0, IRQ 130
        Memory at f704d000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 3
        Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] (prog-if 01 [AHCI 1.0])
        Subsystem: Gigabyte Technology Co., Ltd Device b005
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 127
        Memory at f7048000 (32-bit, non-prefetchable) [size=8K]
        Memory at f704c000 (32-bit, non-prefetchable) [size=256]
        I/O ports at f090 [size=8]
        I/O ports at f080 [size=4]
        I/O ports at f060 [size=32]
        Memory at f704b000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Kernel driver in use: ahci

00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #21 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 122
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [220] Secondary PCI Express
        Kernel driver in use: pcieport

00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 123
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [220] Secondary PCI Express
        Kernel driver in use: pcieport

00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 124
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [220] Secondary PCI Express
        Kernel driver in use: pcieport

00:1d.2 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #11 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 125
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [220] Secondary PCI Express
        Kernel driver in use: pcieport

00:1d.3 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #12 (rev f0) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 126
        Bus: primary=00, secondary=05, subordinate=06, sec-latency=32
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Capabilities: [a0] Power Management version 3
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Access Control Services
        Capabilities: [220] Secondary PCI Express
        Kernel driver in use: pcieport

00:1f.0 ISA bridge: Intel Corporation 200 Series PCH LPC Controller (B250)
        Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Flags: bus master, medium devsel, latency 0

00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
        Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Flags: bus master, fast devsel, latency 0
        Memory at f7044000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
        Subsystem: Gigabyte Technology Co., Ltd Device a182
        Flags: bus master, fast devsel, latency 32, IRQ 132
        Memory at f7040000 (64-bit, non-prefetchable) [size=16K]
        Memory at f7020000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 3
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
        Subsystem: Gigabyte Technology Co., Ltd Device 5001
        Flags: medium devsel, IRQ 16
        Memory at f704a000 (64-bit, non-prefetchable) [size=256]
        I/O ports at f040 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
        Subsystem: Gigabyte Technology Co., Ltd Device e000
        Flags: bus master, fast devsel, latency 0, IRQ 129
        Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: [c8] Power Management version 3
        Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [e0] PCI Advanced Features
        Kernel driver in use: e1000e
        Kernel modules: e1000e

05:00.0 PCI bridge: Integrated Technology Express, Inc. IT8892E PCIe to PCI Bridge (rev 71) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0, IRQ 11
        Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
        I/O behind bridge: [disabled]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Capabilities: [90] Power Management version 2
        Capabilities: [a0] Subsystem: Device 0000:0000

dmesg | grep i915

[    8.925116] i915 0000:00:02.0: vgaarb: deactivate vga console
[    8.926683] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.927149] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    8.959353] [drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
[    8.961726] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.996438] fbcon: i915drmfb (fb0) is primary device
[    9.067534] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    9.108227] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

dmesg | grep -i -e i915 -e drm -e vga

[    0.215148] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.215148] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.215148] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.215148] vgaarb: loaded
[    0.338608] fb0: EFI VGA frame buffer device
[    5.024138] systemd[1]: Starting Load Kernel Module drm...
[    5.483782] systemd[1]: modprobe@drm.service: Succeeded.
[    5.483987] systemd[1]: Finished Load Kernel Module drm.
[    8.925040] fb0: switching to inteldrmfb from EFI VGA
[    8.925116] i915 0000:00:02.0: vgaarb: deactivate vga console
[    8.926683] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.927149] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    8.959353] [drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
[    8.961726] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.996438] fbcon: i915drmfb (fb0) is primary device
[    9.067534] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    9.108227] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

lsmod | grep i915

i915                 2662400  31
i2c_algo_bit           16384  1 i915
drm_kms_helper        266240  1 i915
cec                    73728  2 drm_kms_helper,i915
intel_gtt              24576  1 i915
drm                   585728  12 drm_kms_helper,i915

Thanks,
Yuvaraj Velmurugan

Offline

#2 2020-11-29 22:46:41

loqs
Member
Registered: 2014-03-06
Posts: 15,112

Re: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

Can you reproduce the error in the title with the boot parameter snd_hda_intel.enable_silent_stream=0 set?

Offline

#3 2020-11-30 18:03:14

BachoSeven
Member
Registered: 2020-04-16
Posts: 8

Re: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

@loqs I had the same error

snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]

in my journalctl log, and I can reproduce it also after setting the

snd_hda_intel.enable_silent_stream=0

kernel parameter from grub.

Last edited by BachoSeven (2020-11-30 18:05:56)

Offline

#4 2020-11-30 18:19:09

loqs
Member
Registered: 2014-03-06
Posts: 15,112

Re: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

What is the output of

systool -vm snd_hda_intel

Edit:
See https://github.com/torvalds/linux/commi … 13c2a7edf6

Last edited by loqs (2020-11-30 18:27:24)

Offline

#5 2020-12-02 10:22:44

YuvarajVelmurugan
Member
Registered: 2020-11-23
Posts: 15

Re: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

I ran the below command and provided the output.

systool -vm snd_hda_intel

Module = "snd_hda_intel"

  Attributes:
    coresize            = "57344"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "2"
    srcversion          = "F3BFCE2BFBC7E174B1B8F0B"
    taint               = ""
    uevent              = <store method only>

  Parameters:
    align_buffer_size   = "-1"
    bdl_pos_adj         = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    beep_mode           = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    dmic_detect         = "Y"
    enable_msi          = "-1"
    enable              = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id                  = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index               = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    jackpoll_ms         = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    model               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    patch               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    pm_blacklist        = "Y"
    position_fix        = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    power_save          = "0"
    power_save_controller= "Y"
    probe_mask          = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    probe_only          = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    single_cmd          = "-1"
    snoop               = "-1"

  Sections:

Thanks,
Yuvaraj Velmurugan

Offline

#6 2020-12-16 21:21:30

BachoSeven
Member
Registered: 2020-04-16
Posts: 8

Re: snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up

The journal message from the title is still present on the

5.10.1

kernel version (from testing repos); however I found a way to disable the silent_stream feature:

although the aforementioned

snd_hda_intel.enable_silent_stream

did not work, I found this https://bugs.launchpad.net/ubuntu/+sour … mments/43) which seemed to be related, so I tried setting

snd_hda_codec_hdmi.enable_silent_stream=0

This worked.

I also attach the output of

systool -vm snd_hda_intel
Module = "snd_hda_intel"

  Attributes:
    coresize            = "57344"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "3"
    srcversion          = "6C593A7F37EFB110BDA32A0"
    taint               = ""
    uevent              = <store method only>

  Parameters:
    align_buffer_size   = "-1"
    bdl_pos_adj         = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    beep_mode           = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    dmic_detect         = "Y"
    enable_msi          = "-1"
    enable              = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id                  = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index               = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    jackpoll_ms         = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    model               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    patch               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    pm_blacklist        = "Y"
    position_fix        = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    power_save          = "1"
    power_save_controller= "Y"
    probe_mask          = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    probe_only          = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    single_cmd          = "-1"
    snoop               = "-1"

  Sections:

Last edited by BachoSeven (2020-12-16 21:25:34)

Offline

Board footer

Powered by FluxBB