IPv4 Doesn't work on Home Network

DFOwl · 2020-12-19 13:37:46

Recently my laptop's internet stopped working after an update. When I tried using Discord or Firefox, the pages would load forever or time out. I tried pinging google.com, and it worked, albeit very slowly. Pinging 8.8.8.8 Wouldn't work, however. I was also able to use wget to download the google.com/robots.txt file. Further, I tried running Pacman -Syu and to my surprise it was able to run the full update at full speed.

After a bunch of attempts to reset the Network Manager and the such, I decided to reinstall my system (I backed up my user directory, so that's good at least). During the archiso install, I was able to connect to the network and use the internet with absolutely no problem for any reason, and was able to ping 8.8.8.8. Thinking that I've fixed the problem, I booted into my fresh install... and was met with the same frustrating problem.

This laptop is 2015 MacBook Pro using the Broadcom wireless chip. The Kernel driver for it has always worked with no problem, so I can't say for sure whether it's anything to do with that. Is there anything I could do to fix my laptop's internet?

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12
[    0.000000] Linux version 5.9.14-arch1-1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Sat, 12 Dec 2020 14:37:12 +0000
[    0.000000] Command line: rw root=UUID=4017f16d-05fa-4aab-8aaa-5884f413199a initrd=boot\intel-ucode.img initrd=boot\initramfs-linux.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ad00fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad01000-0x000000008ad48fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ad49000-0x000000008ad60fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad61000-0x000000008ad8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008ae39fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ae3a000-0x000000008ae8efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ae8f000-0x000000008aecbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008aecc000-0x000000008aefefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008afa6fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008afa7000-0x000000008afdefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008afdf000-0x000000008affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd70000-0x00000000ffd9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x73837190-0x73837728] usable ==> usable
[    0.000000] e820: update [mem 0x73837190-0x73837728] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007383718f] usable
[    0.000000] reserve setup_data: [mem 0x0000000073837190-0x0000000073837728] usable
[    0.000000] reserve setup_data: [mem 0x0000000073837729-0x000000008ad00fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ad01000-0x000000008ad48fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008ad49000-0x000000008ad60fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ad61000-0x000000008ad8efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008ad8f000-0x000000008ae39fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ae3a000-0x000000008ae8efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008ae8f000-0x000000008aecbfff] usable
[    0.000000] reserve setup_data: [mem 0x000000008aecc000-0x000000008aefefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008aeff000-0x000000008afa6fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008afa7000-0x000000008afdefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008afdf000-0x000000008affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008b000000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffd70000-0x00000000ffd9ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000046effffff] usable
[    0.000000] efi: EFI v1.10 by Apple
[    0.000000] efi: ACPI=0x8ad8e000 ACPI 2.0=0x8ad8e014 SMBIOS=0x8afad000 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS 186.0.0.0.0 06/14/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2899.949 MHz processor
[    0.000152] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000153] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000159] last_pfn = 0x46f000 max_arch_pfn = 0x400000000
[    0.000162] MTRR default type: write-back
[    0.000163] MTRR fixed ranges enabled:
[    0.000164]   00000-9FFFF write-back
[    0.000164]   A0000-BFFFF uncachable
[    0.000165]   C0000-DFFFF write-protect
[    0.000166]   E0000-FFFFF uncachable
[    0.000166] MTRR variable ranges enabled:
[    0.000167]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000168]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000169]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000170]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000170]   4 base 008B000000 mask 7FFF000000 uncachable
[    0.000171]   5 disabled
[    0.000171]   6 disabled
[    0.000172]   7 disabled
[    0.000172]   8 disabled
[    0.000172]   9 disabled
[    0.000464] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000620] last_pfn = 0x8b000 max_arch_pfn = 0x400000000
[    0.011244] check: Scanning 1 areas for low memory corruption
[    0.011248] Using GB pages for direct mapping
[    0.012020] Secure boot disabled
[    0.012021] RAMDISK: [mem 0x6db13000-0x6e5f1fff]
[    0.012026] ACPI: Early table checksum verification disabled
[    0.012029] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE )
[    0.012031] ACPI: XSDT 0x000000008AD8E1C0 00009C (v01 APPLE  Apple00  00000000      01000013)
[    0.012036] ACPI: FACP 0x000000008AD8C000 0000F4 (v05 APPLE  Apple00  00000000 Loki 0000005F)
[    0.012040] ACPI: DSDT 0x000000008AD7E000 0089FE (v03 APPLE  MacBookP 00010000 INTL 20140424)
[    0.012043] ACPI: FACS 0x000000008AD06000 000040
[    0.012045] ACPI: FACS 0x000000008AD06000 000040
[    0.012047] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.012049] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE  Apple00  00000001 Loki 0000005F)
[    0.012051] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.012054] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.012056] ACPI: SSDT 0x000000008AD7D000 00010B (v01 APPLE  SataAhci 00001000 INTL 20140424)
[    0.012058] ACPI: SSDT 0x000000008AD7C000 000024 (v01 APPLE  SmcDppt  00001000 INTL 20140424)
[    0.012060] ACPI: SSDT 0x000000008AD7B000 000032 (v01 APPLE  SsdtS3   00001000 INTL 20140424)
[    0.012063] ACPI: SSDT 0x000000008AD78000 002B50 (v01 APPLE  PcieTbt  00001000 INTL 20140424)
[    0.012065] ACPI: SSDT 0x000000008AD6B000 0000B8 (v01 APPLE  Sdxc     00001000 INTL 20140424)
[    0.012067] ACPI: SSDT 0x000000008AD6A000 000A74 (v02 APPLE  Xhci     00001000 INTL 20140424)
[    0.012070] ACPI: SSDT 0x000000008AD63000 00067B (v01 PmRef  Cpu0Ist  00003000 INTL 20140424)
[    0.012072] ACPI: SSDT 0x000000008AD62000 000C17 (v01 CpuRef CpuSsdt  00003000 INTL 20140424)
[    0.012074] ACPI: DMAR 0x000000008AD61000 000088 (v01 APPLE  BDW      00000001 INTL 00000001)
[    0.012077] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.012083] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[    0.012084] ACPI: Local APIC address 0xfee00000
[    0.012119] No NUMA configuration found
[    0.012119] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
[    0.012123] NODE_DATA(0) allocated [mem 0x46effc000-0x46effffff]
[    0.012153] Zone ranges:
[    0.012153]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012154]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012155]   Normal   [mem 0x0000000100000000-0x000000046effffff]
[    0.012156]   Device   empty
[    0.012157] Movable zone start for each node
[    0.012157] Early memory node ranges
[    0.012158]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.012159]   node   0: [mem 0x0000000000059000-0x000000000009ffff]
[    0.012159]   node   0: [mem 0x0000000000100000-0x000000008ad00fff]
[    0.012160]   node   0: [mem 0x000000008ad49000-0x000000008ad60fff]
[    0.012161]   node   0: [mem 0x000000008ad8f000-0x000000008ae39fff]
[    0.012161]   node   0: [mem 0x000000008ae8f000-0x000000008aecbfff]
[    0.012162]   node   0: [mem 0x000000008aeff000-0x000000008afa6fff]
[    0.012162]   node   0: [mem 0x000000008afdf000-0x000000008affffff]
[    0.012163]   node   0: [mem 0x0000000100000000-0x000000046effffff]
[    0.012344] Zeroed struct page in unavailable ranges: 24984 pages
[    0.012345] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
[    0.012346] On node 0 totalpages: 4169320
[    0.012347]   DMA zone: 64 pages used for memmap
[    0.012347]   DMA zone: 22 pages reserved
[    0.012348]   DMA zone: 3998 pages, LIFO batch:0
[    0.012371]   DMA32 zone: 8828 pages used for memmap
[    0.012372]   DMA32 zone: 564938 pages, LIFO batch:63
[    0.016460]   Normal zone: 56256 pages used for memmap
[    0.016462]   Normal zone: 3600384 pages, LIFO batch:63
[    0.042502] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.042645] ACPI: PM-Timer IO Port: 0x1808
[    0.042647] ACPI: Local APIC address 0xfee00000
[    0.042654] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.042655] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.042655] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.042656] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.042656] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.042657] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.042657] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.042657] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.042668] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.042670] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.042671] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.042672] ACPI: IRQ0 used by override.
[    0.042673] ACPI: IRQ9 used by override.
[    0.042675] Using ACPI (MADT) for SMP configuration information
[    0.042676] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.042680] TSC deadline timer available
[    0.042681] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.042700] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.042701] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.042702] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.042703] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.042704] PM: hibernation: Registered nosave memory: [mem 0x73837000-0x73837fff]
[    0.042706] PM: hibernation: Registered nosave memory: [mem 0x73837000-0x73837fff]
[    0.042707] PM: hibernation: Registered nosave memory: [mem 0x8ad01000-0x8ad48fff]
[    0.042708] PM: hibernation: Registered nosave memory: [mem 0x8ad61000-0x8ad8efff]
[    0.042710] PM: hibernation: Registered nosave memory: [mem 0x8ae3a000-0x8ae8efff]
[    0.042711] PM: hibernation: Registered nosave memory: [mem 0x8aecc000-0x8aefefff]
[    0.042712] PM: hibernation: Registered nosave memory: [mem 0x8afa7000-0x8afdefff]
[    0.042714] PM: hibernation: Registered nosave memory: [mem 0x8b000000-0x8fffffff]
[    0.042714] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xe00f7fff]
[    0.042715] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.042715] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.042716] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.042716] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffd6ffff]
[    0.042717] PM: hibernation: Registered nosave memory: [mem 0xffd70000-0xffd9ffff]
[    0.042717] PM: hibernation: Registered nosave memory: [mem 0xffda0000-0xffffffff]
[    0.042719] [mem 0x90000000-0xe00f7fff] available for PCI devices
[    0.042721] Booting paravirtualized kernel on bare hardware
[    0.042724] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.047118] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.047350] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
[    0.047355] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
[    0.047356] pcpu-alloc: [0] 0 1 2 3 
[    0.047376] Built 1 zonelists, mobility grouping on.  Total pages: 4104150
[    0.047377] Policy zone: Normal
[    0.047378] Kernel command line: rw root=UUID=4017f16d-05fa-4aab-8aaa-5884f413199a initrd=boot\intel-ucode.img initrd=boot\initramfs-linux.img
[    0.048514] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.049068] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.049109] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.092985] Memory: 15895716K/16677280K available (14339K kernel code, 1505K rwdata, 7952K rodata, 1660K init, 2944K bss, 781308K reserved, 0K cma-reserved)
[    0.092993] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
[    0.093105] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.093116] Kernel/User page tables isolation: enabled
[    0.093134] ftrace: allocating 40888 entries in 160 pages
[    0.106608] ftrace: allocated 160 pages with 2 groups
[    0.106711] rcu: Preemptible hierarchical RCU implementation.
[    0.106711] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.106712] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.106712] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.106713] 	Trampoline variant of Tasks RCU enabled.
[    0.106714] 	Rude variant of Tasks RCU enabled.
[    0.106714] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.106715] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.109668] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[    0.109976] Console: colour dummy device 80x25
[    0.109980] printk: console [tty0] enabled
[    0.109995] ACPI: Core revision 20200717
[    0.110094] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.110104] APIC: Switch to symmetric I/O mode setup
[    0.110106] DMAR: Host address width 39
[    0.110107] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.110111] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.110112] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.110115] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.110116] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.110118] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.110118] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.110119] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.110119] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.110620] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.110621] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.111234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.126773] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29cd12b3506, max_idle_ns: 440795262283 ns
[    0.126777] Calibrating delay loop (skipped), value calculated using timer frequency.. 5802.56 BogoMIPS (lpj=9666496)
[    0.126779] pid_max: default: 32768 minimum: 301
[    0.139935] LSM: Security Framework initializing
[    0.139941] Yama: becoming mindful.
[    0.139992] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.140028] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.140295] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.140305] process: using mwait in idle threads
[    0.140308] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.140308] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.140311] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.140313] Spectre V2 : Mitigation: Full generic retpoline
[    0.140313] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.140314] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.140315] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.140315] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.140316] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.140318] SRBDS: Mitigation: Microcode
[    0.140319] MDS: Mitigation: Clear CPU buffers
[    0.140562] Freeing SMP alternatives memory: 32K
[    0.141552] smpboot: CPU0: Intel(R) Core(TM) i5-5287U CPU @ 2.90GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.141648] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.141673] ... version:                3
[    0.141674] ... bit width:              48
[    0.141674] ... generic registers:      4
[    0.141675] ... value mask:             0000ffffffffffff
[    0.141675] ... max period:             00007fffffffffff
[    0.141676] ... fixed-purpose events:   3
[    0.141676] ... event mask:             000000070000000f
[    0.141715] rcu: Hierarchical SRCU implementation.
[    0.142141] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.142190] smp: Bringing up secondary CPUs ...
[    0.142293] x86: Booting SMP configuration:
[    0.142294] .... node  #0, CPUs:      #1 #2
[    0.143523] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.143576]  #3
[    0.143868] smp: Brought up 1 node, 4 CPUs
[    0.143868] smpboot: Max logical packages: 1
[    0.143868] smpboot: Total of 4 processors activated (23208.24 BogoMIPS)
[    0.145190] devtmpfs: initialized
[    0.145190] x86/mm: Memory block size: 128MB
[    0.146808] PM: Registering ACPI NVS region [mem 0x8ad01000-0x8ad48fff] (294912 bytes)
[    0.146895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.146895] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.146895] pinctrl core: initialized pinctrl subsystem
[    0.146921] PM: RTC time: 13:30:49, date: 2020-12-19
[    0.147021] NET: Registered protocol family 16
[    0.147266] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.147452] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.147635] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.147642] audit: initializing netlink subsys (disabled)
[    0.147653] audit: type=2000 audit(1608384649.036:1): state=initialized audit_enabled=0 res=1
[    0.147653] thermal_sys: Registered thermal governor 'fair_share'
[    0.147653] thermal_sys: Registered thermal governor 'bang_bang'
[    0.147653] thermal_sys: Registered thermal governor 'step_wise'
[    0.147653] thermal_sys: Registered thermal governor 'user_space'
[    0.147653] thermal_sys: Registered thermal governor 'power_allocator'
[    0.147653] cpuidle: using governor ladder
[    0.147653] cpuidle: using governor menu
[    0.147653] ACPI: bus type PCI registered
[    0.147653] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.147653] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[    0.147653] PCI: not using MMCONFIG
[    0.147653] PCI: Using configuration type 1 for base access
[    0.147653] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.147906] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.147906] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.150210] ACPI: Disabled all _OSI OS vendors
[    0.150211] ACPI: Added _OSI(Module Device)
[    0.150212] ACPI: Added _OSI(Processor Device)
[    0.150212] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.150213] ACPI: Added _OSI(Processor Aggregator Device)
[    0.150214] ACPI: Added _OSI(Linux-Dell-Video)
[    0.150215] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.150215] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.150216] ACPI: Added _OSI(Darwin)
[    0.162577] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.163378] ACPI: EC: EC started
[    0.163379] ACPI: EC: interrupt blocked
[    0.165565] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.165565] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.165828] ACPI: BIOS _OSI(Darwin) query honored via DMI
[    0.166442] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.166607] ACPI Error: Needed type [Reference], found [Integer] 000000007d0fd9fb (20200717/exresop-66)
[    0.166618] fbcon: Taking over console
[    0.166624] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20200717/dswexec-431)
[    0.166629] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20200717/psparse-529)
[    0.167009] ACPI: Dynamic OEM Table Load:
[    0.167015] ACPI: SSDT 0xFFFF8CAF5C12E000 00067C (v01 PmRef  ApIst    00003000 INTL 20140424)
[    0.168244] ACPI: Dynamic OEM Table Load:
[    0.168247] ACPI: SSDT 0xFFFF8CAF5C456E00 000119 (v01 PmRef  ApCst    00003000 INTL 20140424)
[    0.169792] ACPI: Interpreter enabled
[    0.169818] ACPI: (supports S0 S3 S4 S5)
[    0.169819] ACPI: Using IOAPIC for interrupt routing
[    0.169847] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[    0.170424] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
[    0.170433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.170705] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.181908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.181912] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
[    0.181930] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
[    0.182228] PCI host bridge to bus 0000:00
[    0.182230] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.182231] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.182232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.182233] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.182234] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.182234] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.182235] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.182236] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.182237] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.182238] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.182239] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.182239] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.182240] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.182241] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.182242] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.182243] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.182244] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff window]
[    0.182244] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.182246] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.182274] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.182372] pci 0000:00:02.0: [8086:162b] type 00 class 0x030000
[    0.182380] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.182385] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.182389] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.182399] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.182400] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.182499] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.182506] pci 0000:00:03.0: reg 0x10: [mem 0xc1810000-0xc1813fff 64bit]
[    0.182632] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.182646] pci 0000:00:14.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit]
[    0.182697] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.182861] pci 0000:00:15.0: [8086:9ce0] type 00 class 0x080102
[    0.182876] pci 0000:00:15.0: reg 0x10: [mem 0xc181a000-0xc181afff]
[    0.183013] pci 0000:00:15.4: [8086:9ce6] type 00 class 0x0c8000
[    0.183027] pci 0000:00:15.4: reg 0x10: [mem 0xc1819000-0xc1819fff]
[    0.183185] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.183201] pci 0000:00:16.0: reg 0x10: [mem 0xc181b100-0xc181b11f 64bit]
[    0.183261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.183329] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.183343] pci 0000:00:1b.0: reg 0x10: [mem 0xc1814000-0xc1817fff 64bit]
[    0.183392] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.183480] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.183553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.183670] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400
[    0.183744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.183867] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.183943] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.184059] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.184125] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.184241] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[    0.184316] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.184438] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.184607] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.184621] pci 0000:00:1f.3: reg 0x10: [mem 0xc181b000-0xc181b0ff 64bit]
[    0.184638] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.184726] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.184752] pci 0000:00:1f.6: reg 0x10: [mem 0xc1818000-0xc1818fff 64bit]
[    0.184933] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.185004] pci 0000:02:00.0: [14e4:1570] type 00 class 0x048000
[    0.185025] pci 0000:02:00.0: reg 0x10: [mem 0xc1700000-0xc170ffff 64bit]
[    0.185039] pci 0000:02:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.185053] pci 0000:02:00.0: reg 0x20: [mem 0xc1600000-0xc16fffff 64bit]
[    0.185144] pci 0000:02:00.0: supports D1
[    0.185145] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.185290] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.185294] pci 0000:00:1c.1:   bridge window [mem 0xc1600000-0xc17fffff]
[    0.185299] pci 0000:00:1c.1:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.185409] pci 0000:03:00.0: [14e4:43ba] type 00 class 0x028000
[    0.185448] pci 0000:03:00.0: reg 0x10: [mem 0xc1400000-0xc1407fff 64bit]
[    0.185473] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc13fffff 64bit]
[    0.185686] pci 0000:03:00.0: supports D1 D2
[    0.185687] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185985] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.185989] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc14fffff]
[    0.186060] pci 0000:05:00.0: [8086:156d] type 01 class 0x060400
[    0.186112] pci 0000:05:00.0: enabling Extended Tags
[    0.186192] pci 0000:05:00.0: supports D1 D2
[    0.186192] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193464] pci 0000:00:1c.4: PCI bridge to [bus 05-9b]
[    0.193467] pci 0000:00:1c.4:   bridge window [io  0x4000-0x6fff]
[    0.193469] pci 0000:00:1c.4:   bridge window [mem 0xc1900000-0xcd9fffff]
[    0.193474] pci 0000:00:1c.4:   bridge window [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.193619] pci 0000:06:00.0: [8086:156d] type 01 class 0x060400
[    0.193675] pci 0000:06:00.0: enabling Extended Tags
[    0.193758] pci 0000:06:00.0: supports D1 D2
[    0.193759] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.193902] pci 0000:06:03.0: [8086:156d] type 01 class 0x060400
[    0.193958] pci 0000:06:03.0: enabling Extended Tags
[    0.194044] pci 0000:06:03.0: supports D1 D2
[    0.194045] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194185] pci 0000:06:04.0: [8086:156d] type 01 class 0x060400
[    0.194241] pci 0000:06:04.0: enabling Extended Tags
[    0.194325] pci 0000:06:04.0: supports D1 D2
[    0.194326] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194464] pci 0000:06:05.0: [8086:156d] type 01 class 0x060400
[    0.194520] pci 0000:06:05.0: enabling Extended Tags
[    0.194604] pci 0000:06:05.0: supports D1 D2
[    0.194604] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194739] pci 0000:06:06.0: [8086:156d] type 01 class 0x060400
[    0.194795] pci 0000:06:06.0: enabling Extended Tags
[    0.194878] pci 0000:06:06.0: supports D1 D2
[    0.194879] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195021] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
[    0.195027] pci 0000:05:00.0:   bridge window [io  0x4000-0x5fff]
[    0.195030] pci 0000:05:00.0:   bridge window [mem 0xc1900000-0xc99fffff]
[    0.195036] pci 0000:05:00.0:   bridge window [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.195120] pci 0000:07:00.0: [8086:156c] type 00 class 0x088000
[    0.195141] pci 0000:07:00.0: reg 0x10: [mem 0xc1900000-0xc193ffff]
[    0.195153] pci 0000:07:00.0: reg 0x14: [mem 0xc1940000-0xc1940fff]
[    0.195218] pci 0000:07:00.0: enabling Extended Tags
[    0.195326] pci 0000:07:00.0: supports D1 D2
[    0.195327] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.203473] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.203481] pci 0000:06:00.0:   bridge window [mem 0xc1900000-0xc19fffff]
[    0.203565] pci 0000:06:03.0: PCI bridge to [bus 08-38]
[    0.203571] pci 0000:06:03.0:   bridge window [io  0x4000-0x4fff]
[    0.203575] pci 0000:06:03.0:   bridge window [mem 0xc1a00000-0xc59fffff]
[    0.203580] pci 0000:06:03.0:   bridge window [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.203653] pci 0000:06:04.0: PCI bridge to [bus 39]
[    0.203736] pci 0000:06:05.0: PCI bridge to [bus 3a-6a]
[    0.203742] pci 0000:06:05.0:   bridge window [io  0x5000-0x5fff]
[    0.203745] pci 0000:06:05.0:   bridge window [mem 0xc5a00000-0xc99fffff]
[    0.203751] pci 0000:06:05.0:   bridge window [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.203793] pci 0000:06:06.0: PCI bridge to [bus 6b]
[    0.204033] pci 0000:04:00.0: [144d:a801] type 00 class 0x010601
[    0.204085] pci 0000:04:00.0: reg 0x24: [mem 0xc1500000-0xc1501fff]
[    0.204207] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.5 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.204381] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.204385] pci 0000:00:1c.5:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.205628] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.205683] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.205737] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.205789] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.205841] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.205896] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.205948] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.206000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.206241] ACPI: EC: interrupt unblocked
[    0.206241] ACPI: EC: event unblocked
[    0.206248] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.206249] ACPI: EC: GPE=0x4e
[    0.206250] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[    0.206251] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.206282] iommu: Default domain type: Translated 
[    0.206287] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.206287] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.206287] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.206287] vgaarb: loaded
[    0.206287] SCSI subsystem initialized
[    0.206287] libata version 3.00 loaded.
[    0.206287] ACPI: bus type USB registered
[    0.206287] usbcore: registered new interface driver usbfs
[    0.206287] usbcore: registered new interface driver hub
[    0.206287] usbcore: registered new device driver usb
[    0.206287] pps_core: LinuxPPS API ver. 1 registered
[    0.206287] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.206287] PTP clock support registered
[    0.206287] EDAC MC: Ver: 3.0.0
[    0.206870] Registered efivars operations
[    0.206891] NetLabel: Initializing
[    0.206891] NetLabel:  domain hash size = 128
[    0.206892] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.206902] NetLabel:  unlabeled traffic allowed by default
[    0.206905] PCI: Using ACPI for IRQ routing
[    0.212405] PCI: pci_cache_line_size set to 64 bytes
[    0.212508] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.212509] e820: reserve RAM buffer [mem 0x73837190-0x73ffffff]
[    0.212510] e820: reserve RAM buffer [mem 0x8ad01000-0x8bffffff]
[    0.212511] e820: reserve RAM buffer [mem 0x8ad61000-0x8bffffff]
[    0.212512] e820: reserve RAM buffer [mem 0x8ae3a000-0x8bffffff]
[    0.212514] e820: reserve RAM buffer [mem 0x8aecc000-0x8bffffff]
[    0.212514] e820: reserve RAM buffer [mem 0x8afa7000-0x8bffffff]
[    0.212515] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[    0.212516] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
[    0.212520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.212520] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.214497] clocksource: Switched to clocksource tsc-early
[    0.224326] VFS: Disk quotas dquot_6.6.0
[    0.224340] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.224415] pnp: PnP ACPI init
[    0.224629] system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
[    0.224634] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.224685] system 00:01: [io  0xffff] has been reserved
[    0.224686] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.224687] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.224690] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224707] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.225606] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.225607] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.225608] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.225609] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.225611] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.225612] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.225614] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.225615] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.225616] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[    0.225617] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.225620] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.225680] system 00:04: [mem 0x20000000-0x201fffff] could not be reserved
[    0.225681] system 00:04: [mem 0x40000000-0x401fffff] could not be reserved
[    0.225684] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.225826] pnp: PnP ACPI: found 5 devices
[    0.226911] pci 0000:00:02.0: assigning 4 device properties
[    0.226922] pci 0000:07:00.0: assigning 8 device properties
[    0.226929] pci 0000:00:1b.0: assigning 4 device properties
[    0.231446] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.231496] NET: Registered protocol family 2
[    0.231630] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.231733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.231946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.232055] TCP: Hash tables configured (established 131072 bind 65536)
[    0.232137] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.232212] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.232255] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.232340] NET: Registered protocol family 1
[    0.232345] NET: Registered protocol family 44
[    0.232354] pci 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.232356] pci 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[    0.232358] pci 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[    0.232359] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[    0.232360] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000 add_align 100000
[    0.232362] pci 0000:06:06.0: bridge window [io  0x1000-0x0fff] to [bus 6b] add_size 1000
[    0.232363] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000 add_align 100000
[    0.232364] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6b] add_size 200000 add_align 100000
[    0.232370] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.232380] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.232384] pci 0000:00:1c.1:   bridge window [mem 0xc1600000-0xc17fffff]
[    0.232387] pci 0000:00:1c.1:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.232391] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.232395] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc14fffff]
[    0.232406] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232407] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232409] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[    0.232410] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.232412] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232413] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232414] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.232415] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.232417] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232418] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232419] pci 0000:06:00.0: BAR 13: no space for [io  size 0x1000]
[    0.232420] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232421] pci 0000:06:04.0: BAR 13: no space for [io  size 0x1000]
[    0.232422] pci 0000:06:04.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232423] pci 0000:06:06.0: BAR 13: no space for [io  size 0x1000]
[    0.232424] pci 0000:06:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232426] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.232427] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.232429] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232429] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232431] pci 0000:06:06.0: BAR 13: no space for [io  size 0x1000]
[    0.232431] pci 0000:06:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232432] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[    0.232433] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.232435] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232436] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232437] pci 0000:06:04.0: BAR 13: no space for [io  size 0x1000]
[    0.232438] pci 0000:06:04.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232440] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.232441] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.232442] pci 0000:06:00.0: BAR 13: no space for [io  size 0x1000]
[    0.232442] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x1000]
[    0.232444] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.232449] pci 0000:06:00.0:   bridge window [mem 0xc1900000-0xc19fffff]
[    0.232457] pci 0000:06:03.0: PCI bridge to [bus 08-38]
[    0.232460] pci 0000:06:03.0:   bridge window [io  0x4000-0x4fff]
[    0.232464] pci 0000:06:03.0:   bridge window [mem 0xc1a00000-0xc59fffff]
[    0.232468] pci 0000:06:03.0:   bridge window [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.232473] pci 0000:06:04.0: PCI bridge to [bus 39]
[    0.232486] pci 0000:06:05.0: PCI bridge to [bus 3a-6a]
[    0.232488] pci 0000:06:05.0:   bridge window [io  0x5000-0x5fff]
[    0.232492] pci 0000:06:05.0:   bridge window [mem 0xc5a00000-0xc99fffff]
[    0.232496] pci 0000:06:05.0:   bridge window [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.232502] pci 0000:06:06.0: PCI bridge to [bus 6b]
[    0.232514] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
[    0.232516] pci 0000:05:00.0:   bridge window [io  0x4000-0x5fff]
[    0.232521] pci 0000:05:00.0:   bridge window [mem 0xc1900000-0xc99fffff]
[    0.232524] pci 0000:05:00.0:   bridge window [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.232530] pci 0000:00:1c.4: PCI bridge to [bus 05-9b]
[    0.232531] pci 0000:00:1c.4:   bridge window [io  0x4000-0x6fff]
[    0.232534] pci 0000:00:1c.4:   bridge window [mem 0xc1900000-0xcd9fffff]
[    0.232537] pci 0000:00:1c.4:   bridge window [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.232541] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.232544] pci 0000:00:1c.5:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.232550] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.232551] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.232552] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.232553] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.232554] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.232555] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.232556] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.232557] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.232558] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.232559] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.232560] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.232561] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.232562] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.232563] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.232564] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.232565] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.232566] pci_bus 0000:00: resource 20 [mem 0x90000000-0xfeafffff window]
[    0.232566] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.232568] pci_bus 0000:02: resource 1 [mem 0xc1600000-0xc17fffff]
[    0.232569] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.232570] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc14fffff]
[    0.232571] pci_bus 0000:05: resource 0 [io  0x4000-0x6fff]
[    0.232572] pci_bus 0000:05: resource 1 [mem 0xc1900000-0xcd9fffff]
[    0.232572] pci_bus 0000:05: resource 2 [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.232573] pci_bus 0000:06: resource 0 [io  0x4000-0x5fff]
[    0.232574] pci_bus 0000:06: resource 1 [mem 0xc1900000-0xc99fffff]
[    0.232575] pci_bus 0000:06: resource 2 [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.232576] pci_bus 0000:07: resource 1 [mem 0xc1900000-0xc19fffff]
[    0.232577] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.232578] pci_bus 0000:08: resource 1 [mem 0xc1a00000-0xc59fffff]
[    0.232579] pci_bus 0000:08: resource 2 [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.232580] pci_bus 0000:3a: resource 0 [io  0x5000-0x5fff]
[    0.232581] pci_bus 0000:3a: resource 1 [mem 0xc5a00000-0xc99fffff]
[    0.232582] pci_bus 0000:3a: resource 2 [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.232583] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc15fffff]
[    0.232714] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.232985] PCI: CLS 256 bytes, default 64
[    0.233021] Trying to unpack rootfs image as initramfs...
[    0.334612] Freeing initrd memory: 11132K
[    0.334655] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.334657] software IO TLB: mapped [mem 0x69b13000-0x6db13000] (64MB)
[    0.334812] check: Scanning for low memory corruption every 60 seconds
[    0.335119] Initialise system trusted keyrings
[    0.335129] Key type blacklist registered
[    0.335174] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.336192] zbud: loaded
[    0.346262] Key type asymmetric registered
[    0.346263] Asymmetric key parser 'x509' registered
[    0.346270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.346307] io scheduler mq-deadline registered
[    0.346308] io scheduler kyber registered
[    0.346326] io scheduler bfq registered
[    0.347479] pcieport 0000:06:00.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.347711] pcieport 0000:06:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.347934] pcieport 0000:06:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.348159] pcieport 0000:06:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.348383] pcieport 0000:06:06.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.348535] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.348608] efifb: probing for efifb
[    0.348622] efifb: No BGRT, not showing boot graphics
[    0.348623] efifb: framebuffer at 0xb0000000, using 20700k, total 20700k
[    0.348624] efifb: mode is 2880x1800x32, linelength=11776, pages=1
[    0.348624] efifb: scrolling: redraw
[    0.348625] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.348697] Console: switching to colour frame buffer device 180x56
[    0.356849] fb0: EFI VGA frame buffer device
[    0.356857] intel_idle: MWAIT substates: 0x11142120
[    0.356858] intel_idle: v0.5.1 model 0x3D
[    0.357052] intel_idle: Local APIC timer is reliable in all C-states
[    0.357128] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.360173] ACPI: Lid Switch [LID0]
[    0.360210] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.360227] ACPI: Power Button [PWRB]
[    0.360251] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.360264] ACPI: Sleep Button [SLPB]
[    0.360285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.363470] ACPI: Power Button [PWRF]
[    0.364084] dw_dmac_pci 0000:00:15.0: DesignWare DMA Controller, 8 channels
[    0.364159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.364618] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.364619] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.365006] ahci 0000:04:00.0: version 3.0
[    0.376945] ahci 0000:04:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.376947] ahci 0000:04:00.0: flags: 64bit ncq led clo only pio ccc 
[    0.377371] scsi host0: ahci
[    0.377441] ata1: SATA max UDMA/133 abar m8192@0xc1500000 port 0xc1500100 irq 53
[    0.377482] usbcore: registered new interface driver usbserial_generic
[    0.377485] usbserial: USB Serial support registered for generic
[    0.377501] rtc_cmos 00:02: RTC can wake from S4
[    0.377702] rtc_cmos 00:02: registered as rtc0
[    0.377745] rtc_cmos 00:02: setting system clock to 2020-12-19T13:30:49 UTC (1608384649)
[    0.377758] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.377816] intel_pstate: Intel P-state driver initializing
[    0.378219] ledtrig-cpu: registered to indicate activity on CPUs
[    0.378307] drop_monitor: Initializing network drop monitor service
[    0.378433] NET: Registered protocol family 10
[    0.382851] Segment Routing with IPv6
[    0.382852] RPL Segment Routing with IPv6
[    0.382874] NET: Registered protocol family 17
[    0.383085] microcode: sig=0x306d4, pf=0x40, revision=0x2f
[    0.383123] microcode: Microcode Update Driver: v2.2.
[    0.383127] IPI shorthand broadcast: enabled
[    0.383133] sched_clock: Marking stable (382879410, 239848)->(386587050, -3467792)
[    0.383192] registered taskstats version 1
[    0.383199] Loading compiled-in X.509 certificates
[    0.385583] Loaded X.509 cert 'Build time autogenerated kernel key: 82b5889aaa59dbf702af08992c2866a5527a56f2'
[    0.385677] zswap: loaded using pool lz4/z3fold
[    0.385772] Key type ._fscrypt registered
[    0.385773] Key type .fscrypt registered
[    0.385773] Key type fscrypt-provisioning registered
[    0.386315] PM:   Magic number: 0:322:534
[    0.386461] RAS: Correctable Errors collector initialized.
[    0.696977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.697957] ata1.00: unexpected _GTF length (8)
[    0.698093] ata1.00: ATA-8: APPLE SSD SM0512G, BXZ13A0Q, max UDMA/133
[    0.698095] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.698485] ata1.00: unexpected _GTF length (8)
[    0.698626] ata1.00: configured for UDMA/133
[    0.698756] scsi 0:0:0:0: Direct-Access     ATA      APPLE SSD SM0512 3A0Q PQ: 0 ANSI: 5
[    0.698926] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/466 GiB)
[    0.698927] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.698933] sd 0:0:0:0: [sda] Write Protect is off
[    0.698934] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.698943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.700172]  sda: sda1 sda2
[    0.700508] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.701812] Freeing unused decrypted memory: 2040K
[    0.702080] Freeing unused kernel image (initmem) memory: 1660K
[    0.723534] Write protecting the kernel read-only data: 24576k
[    0.723992] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.724080] Freeing unused kernel image (rodata/data gap) memory: 240K
[    0.767210] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.767211] x86/mm: Checking user space page tables
[    0.808737] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.808741] Run /init as init process
[    0.808742]   with arguments:
[    0.808743]     /init
[    0.808743]   with environment:
[    0.808744]     HOME=/
[    0.808744]     TERM=linux
[    1.083160] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.083165] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.084224] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.084229] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[    1.085547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    1.085548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085549] usb usb1: Product: xHCI Host Controller
[    1.085550] usb usb1: Manufacturer: Linux 5.9.14-arch1-1 xhci-hcd
[    1.085551] usb usb1: SerialNumber: 0000:00:14.0
[    1.085768] hub 1-0:1.0: USB hub found
[    1.085796] hub 1-0:1.0: 11 ports detected
[    1.086464] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.086466] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.086469] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.086558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    1.086559] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086560] usb usb2: Product: xHCI Host Controller
[    1.086560] usb usb2: Manufacturer: Linux 5.9.14-arch1-1 xhci-hcd
[    1.086561] usb usb2: SerialNumber: 0000:00:14.0
[    1.086694] hub 2-0:1.0: USB hub found
[    1.086702] hub 2-0:1.0: 4 ports detected
[    1.086743] usb: port power management may be unreliable
[    1.150522] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.172902] random: fast init done
[    1.205147] systemd[1]: systemd 247.2-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.220263] systemd[1]: Detected architecture x86-64.
[    1.258267] systemd[1]: Set hostname to <DharmaMachine>.
[    1.336832] tsc: Refined TSC clocksource calibration: 2899.999 MHz
[    1.336838] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29cd420d9ea, max_idle_ns: 440795262284 ns
[    1.336873] clocksource: Switched to clocksource tsc
[    1.337627] systemd[1]: Queued start job for default target Graphical Interface.
[    1.343267] systemd[1]: Created slice system-getty.slice.
[    1.343614] systemd[1]: Created slice system-modprobe.slice.
[    1.343902] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.344197] systemd[1]: Created slice User and Session Slice.
[    1.344326] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.344455] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.344656] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.344785] systemd[1]: Reached target Local Encrypted Volumes.
[    1.344883] systemd[1]: Reached target Paths.
[    1.344954] systemd[1]: Reached target Remote File Systems.
[    1.345031] systemd[1]: Reached target Slices.
[    1.345102] systemd[1]: Reached target Swap.
[    1.345253] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.346149] systemd[1]: Listening on Process Core Dump Socket.
[    1.346350] systemd[1]: Listening on Journal Audit Socket.
[    1.346497] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.346650] systemd[1]: Listening on Journal Socket.
[    1.346815] systemd[1]: Listening on udev Control Socket.
[    1.346950] systemd[1]: Listening on udev Kernel Socket.
[    1.347655] systemd[1]: Mounting Huge Pages File System...
[    1.348429] systemd[1]: Mounting POSIX Message Queue File System...
[    1.349230] systemd[1]: Mounting Kernel Debug File System...
[    1.350250] systemd[1]: Mounting Kernel Trace File System...
[    1.351566] systemd[1]: Mounting Temporary Directory (/tmp)...
[    1.352642] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    1.353646] systemd[1]: Starting Load Kernel Module configfs...
[    1.354529] systemd[1]: Starting Load Kernel Module drm...
[    1.355727] systemd[1]: Starting Load Kernel Module fuse...
[    1.356233] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    1.356300] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    1.357833] systemd[1]: Starting Journal Service...
[    1.358405] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    1.359375] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.359606] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    1.360577] systemd[1]: Starting Apply Kernel Variables...
[    1.360951] Linux agpgart interface v0.103
[    1.361746] systemd[1]: Starting Coldplug All udev Devices...
[    1.363926] systemd[1]: Mounted Huge Pages File System.
[    1.364157] systemd[1]: Mounted POSIX Message Queue File System.
[    1.364423] systemd[1]: Mounted Kernel Debug File System.
[    1.364676] systemd[1]: Mounted Kernel Trace File System.
[    1.364940] systemd[1]: Mounted Temporary Directory (/tmp).
[    1.365646] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    1.366166] systemd[1]: modprobe@configfs.service: Succeeded.
[    1.366575] systemd[1]: Finished Load Kernel Module configfs.
[    1.369526] fuse: init (API version 7.31)
[    1.370602] systemd[1]: Mounting Kernel Configuration File System...
[    1.374450] systemd[1]: modprobe@fuse.service: Succeeded.
[    1.374913] systemd[1]: Finished Load Kernel Module fuse.
[    1.379338] systemd[1]: Mounting FUSE Control File System...
[    1.382489] EXT4-fs (sda2): re-mounted. Opts: (null)
[    1.386028] systemd[1]: Mounted Kernel Configuration File System.
[    1.388597] systemd[1]: Finished Remount Root and Kernel File Systems.
[    1.391713] systemd[1]: Finished Apply Kernel Variables.
[    1.394430] audit: type=1130 audit(1608384650.512:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.394655] systemd[1]: Mounted FUSE Control File System.
[    1.397501] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    1.397864] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    1.398949] systemd[1]: Starting Load/Save Random Seed...
[    1.402804] systemd[1]: Starting Create System Users...
[    1.412264] systemd[1]: modprobe@drm.service: Succeeded.
[    1.412572] systemd[1]: Finished Load Kernel Module drm.
[    1.414177] audit: type=1130 audit(1608384650.532:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.414191] audit: type=1131 audit(1608384650.532:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.416794] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.433016] systemd[1]: Finished Create System Users.
[    1.434545] audit: type=1130 audit(1608384650.552:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.435326] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.444321] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.445846] audit: type=1130 audit(1608384650.562:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.445910] systemd[1]: Reached target Local File Systems (Pre).
[    1.447418] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[    1.448045] audit: type=1334 audit(1608384650.565:7): prog-id=5 op=LOAD
[    1.448090] audit: type=1334 audit(1608384650.565:8): prog-id=6 op=LOAD
[    1.448519] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    1.462217] systemd[1]: Finished Coldplug All udev Devices.
[    1.465124] audit: type=1130 audit(1608384650.582:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.465254] systemd[1]: Started Journal Service.
[    1.468195] audit: type=1130 audit(1608384650.585:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.580661] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
[    1.581533] ACPI: AC Adapter [ADP1] (on-line)
[    1.597607] usb 1-2: New USB device found, idVendor=13fe, idProduct=5400, bcdDevice= 1.10
[    1.597610] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.597611] usb 1-2: Product: USB DISK 2.0
[    1.597613] usb 1-2: Manufacturer:         
[    1.597614] usb 1-2: SerialNumber: 0708695E12C44F18
[    1.626474] applespi spi-APP000D:00: USB interface already enabled
[    1.709978] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.710020] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.720267] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.720436] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.738815] usb 2-3: New USB device found, idVendor=05ac, idProduct=8406, bcdDevice= 8.20
[    1.738817] usb 2-3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    1.738818] usb 2-3: Product: Card Reader
[    1.738819] usb 2-3: Manufacturer: Apple
[    1.738819] usb 2-3: SerialNumber: 000000000820
[    1.753848] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    1.807113] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[    1.812899] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    1.812901] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.812902] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.812903] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.812903] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.839065] iTCO_vendor_support: vendor-support=0
[    1.854359] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.860127] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.862546] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.862595] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    1.862740] cryptd: max_cpu_qlen set to 1000
[    1.885901] usb-storage 1-2:1.0: USB Mass Storage device detected
[    1.895853] AVX2 version of gcm_enc/dec engaged.
[    1.895855] AES CTR mode by8 optimization enabled
[    1.896662] scsi host1: usb-storage 1-2:1.0
[    1.896739] usb-storage 2-3:1.0: USB Mass Storage device detected
[    1.896841] scsi host2: usb-storage 2-3:1.0
[    1.896900] usbcore: registered new interface driver usb-storage
[    1.898061] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.898113] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.898115] cfg80211: failed to load regulatory.db
[    1.915079] applesmc: key=670 fan=1 temp=35 index=34 acc=0 lux=2 kbd=1
[    1.916872] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.929783] usbcore: registered new interface driver uas
[    1.940225] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    1.977718] Creating 1 MTD partitions on "intel-spi":
[    1.977721] 0x000000000000-0x000000800000 : "BIOS"
[    1.981077] usbcore: registered new device driver apple-mfi-fastcharge
[    2.001138] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    2.002044] usb 1-3: New USB device found, idVendor=05ac, idProduct=8290, bcdDevice= 1.68
[    2.002046] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.002048] usb 1-3: Product: Bluetooth USB Host Controller
[    2.002049] usb 1-3: Manufacturer: Broadcom Corp.
[    2.023681] snd_hda_codec_cirrus hdaudioC1D0: autoconfig for CS4208: line_outs=2 (0x12/0x13/0x0/0x0/0x0) type:speaker
[    2.023683] snd_hda_codec_cirrus hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.023684] snd_hda_codec_cirrus hdaudioC1D0:    hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[    2.023686] snd_hda_codec_cirrus hdaudioC1D0:    mono: mono_out=0x0
[    2.023687] snd_hda_codec_cirrus hdaudioC1D0:    dig-out=0x21/0x0
[    2.023688] snd_hda_codec_cirrus hdaudioC1D0:    inputs:
[    2.023689] snd_hda_codec_cirrus hdaudioC1D0:      Internal Mic=0x1c
[    2.023690] snd_hda_codec_cirrus hdaudioC1D0:      Mic=0x18
[    2.045831] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    2.055762] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[    2.055806] usbcore: registered new interface driver brcmfmac
[    2.055823] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    2.055897] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    2.094145] random: NetworkManager: uninitialized urandom read (48 bytes read)
[    2.130137] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[    2.137267] checking generic (b0000000 1437000) vs hw (c0000000 1000000)
[    2.137269] checking generic (b0000000 1437000) vs hw (b0000000 10000000)
[    2.137269] fb0: switching to inteldrmfb from EFI VGA
[    2.139736] Console: switching to colour dummy device 80x25
[    2.139820] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.142289] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.160663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[    2.163245] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.Apple Inc.-MacBookPro12,1.txt failed with error -2
[    2.163264] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[    2.167611] [drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
[    2.170659] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.171180] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.171512] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.180717] fbcon: i915drmfb (fb0) is primary device
[    2.272330] usb 1-5: New USB device found, idVendor=05ac, idProduct=0273, bcdDevice= 6.22
[    2.272333] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.272334] usb 1-5: Product: Apple Internal Keyboard / Trackpad
[    2.272335] usb 1-5: Manufacturer: Apple Inc.
[    2.272336] usb 1-5: SerialNumber: D3H70640EK1GHJGAM2BF
[    2.297288] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input9
[    2.303535] usbcore: registered new interface driver bcm5974
[    2.303848] hid: raw HID events driver (C) Jiri Kosina
[    2.350079] usbcore: registered new interface driver usbhid
[    2.350081] usbhid: USB HID core driver
[    2.353298] Bluetooth: Core ver 2.22
[    2.353316] NET: Registered protocol family 31
[    2.353317] Bluetooth: HCI device and connection manager initialized
[    2.353320] Bluetooth: HCI socket layer initialized
[    2.353321] Bluetooth: L2CAP socket layer initialized
[    2.353324] Bluetooth: SCO socket layer initialized
[    2.353325] intel_rapl_common: Found RAPL domain package
[    2.353326] intel_rapl_common: Found RAPL domain core
[    2.353327] intel_rapl_common: Found RAPL domain uncore
[    2.353328] intel_rapl_common: Found RAPL domain dram
[    2.358677] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:05AC:8290.0001/input/input10
[    2.391243] usbcore: registered new interface driver btusb
[    2.413746] hid-generic 0003:05AC:8290.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp. Bluetooth USB Host Controller] on usb-0000:00:14.0-3/input0
[    2.413786] mousedev: PS/2 mouse device common for all mice
[    2.413911] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:05AC:8290.0002/input/input11
[    2.414018] hid-generic 0003:05AC:8290.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp. Bluetooth USB Host Controller] on usb-0000:00:14.0-3/input1
[    2.417203] apple 0003:05AC:0273.0003: hiddev0,hidraw2: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input0
[    2.417479] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:05AC:0273.0004/input/input12
[    2.477221] apple 0003:05AC:0273.0004: input,hiddev1,hidraw3: USB HID v1.10 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input1
[    2.478362] apple 0003:05AC:0273.0005: hiddev2,hidraw4: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input3
[    2.478457] apple 0003:05AC:0273.0006: hiddev3,hidraw5: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input4
[    2.509186] Bluetooth: hci0: BCM: chip id 102 build 0727
[    2.510165] Bluetooth: hci0: BCM: product 05ac:8290
[    2.511178] Bluetooth: hci0: BCM: features 0x2f
[    2.527429] Bluetooth: hci0: BCM20703A1 Generic USB UHE Apple 20Mhz fcbga_X87
[    2.696055] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[    2.696088] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    2.696722] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Nov 10 2015 06:38:10 version 7.35.177.61 (r598657) FWID 01-ea662a8c
[    2.736640] brcmfmac 0000:03:00.0 wlp3s0: renamed from wlan0
[    2.910827] scsi 1:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[    2.911184] sd 1:0:0:0: [sdb] 60567552 512-byte logical blocks: (31.0 GB/28.9 GiB)
[    2.911403] sd 1:0:0:0: [sdb] Write Protect is off
[    2.911405] sd 1:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    2.911607] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.911945] scsi 2:0:0:0: Direct-Access     APPLE    SD Card Reader   3.00 PQ: 0 ANSI: 6
[    2.964670] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    3.030128] random: crng init done
[    3.030129] random: 1 urandom warning(s) missed due to ratelimiting
[    3.329635]  sdb: sdb1
[    3.330653] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    3.590535] Console: switching to colour frame buffer device 180x56
[    3.627488] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.672240] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.672312] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.672371] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    3.672430] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    3.672483] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    8.664963] kauditd_printk_skb: 25 callbacks suppressed
[    8.664965] audit: type=1131 audit(1608384657.785:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.972300] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   13.036875] ieee80211 phy0: brcmf_inetaddr_changed: fail to get arp ip table err:-52
[   14.004748] audit: type=1131 audit(1608384663.122:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.249724] audit: type=1130 audit(1608384665.365:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.311057] audit: type=1100 audit(1608384666.429:39): pid=338 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/login" hostname=DharmaMachine addr=? terminal=tty1 res=success'
[   17.313006] audit: type=1101 audit(1608384666.429:40): pid=338 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/login" hostname=DharmaMachine addr=? terminal=tty1 res=success'
[   17.313489] audit: type=1103 audit(1608384666.432:41): pid=338 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/login" hostname=DharmaMachine addr=? terminal=tty1 res=success'
[   17.313563] audit: type=1006 audit(1608384666.432:42): pid=338 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=1 res=1
[   17.326445] audit: type=1130 audit(1608384666.442:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.330704] audit: type=1101 audit(1608384666.449:44): pid=399 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.330748] audit: type=1103 audit(1608384666.449:45): pid=399 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   17.330813] audit: type=1006 audit(1608384666.449:46): pid=399 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
[   26.011129] kauditd_printk_skb: 8 callbacks suppressed
[   26.011131] audit: type=1131 audit(1608384675.129:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   32.248697] audit: type=1131 audit(1608384681.369:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   32.350341] audit: type=1334 audit(1608384681.472:57): prog-id=10 op=UNLOAD
[   32.350345] audit: type=1334 audit(1608384681.472:58): prog-id=9 op=UNLOAD
[  148.090377] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

===EDIT===
After some some troubleshooting it was discovered that I do indeed have an internet connection. However, for some reason it is only ipv6. Archiso connection to the internet via iwctl was able to connect to both ipv4 and ipv6. I have tried using iwctl before, and was able to connect to the network, however the router wouldn't see me and I didn't have an internet connection.

===EDIT 2===
Today I visited my family in a different town, and my internet began working like it always did. Something tells me that this is most likely an ISP/Router problem, and not of the software or the hardware. Thank you everyone for all of the great help you've provided me with!!!

===EDIT 3===
Whenever I am at my house, my laptop connects to the router only with the ipv6 address. The NetworkManager's nameservers contain multiple ipv6 addresses and one ipv4. When I am connected to a network at a different house and router, though, the nameserver contains only two ipv4 nameservers. The different network resolves an ipv4 address, and the router properly shows it. I wonder what might be the issue?

Last edited by DFOwl (2020-12-24 01:28:39)

seth · 2020-12-19 13:45:57

https://wiki.archlinux.org/index.php/Mac#Wi-Fi
https://wiki.archlinux.org/index.php/Br … roadcom-wl

DFOwl · 2020-12-19 14:04:19

seth wrote:

https://wiki.archlinux.org/index.php/Mac#Wi-Fi
https://wiki.archlinux.org/index.php/Br … roadcom-wl

I have installed the broadcom-wl-dkms, but now I have no internet at all. I can't even detect or connect to networks now. ip link doesn't see wlan0 anymore either. Upon removal and reboot, wlan0 or its counterparts appear again and I am once more able to connect and use pacman, but unable to use the internet.

I should probably mention that when I go to my router utility, this computer shows up with an ipv6 rather than ipv4 in the connected ips section. Might this lend any clues?

Last edited by DFOwl (2020-12-19 14:07:23)

Trilby · 2020-12-19 14:11:46

DFOwl wrote:

this computer shows up with an ipv6 rather than ipv4 in the connected ips section. Might this lend any clues?

That was my suspicion based on your first post and the reason you can ping "google.com" but not 8.8.8.8. I'd bet you can successfully ping 2607:f8b0:4009:800::200e which is google's ipv6 address.

Please specify the protocol in ping for tests to confirm:

ping -4 google.com
ping -4 8.8.8.8
ping -6 google.com
ping -6 2607:f8b0:4009:800::200e

Last edited by Trilby (2020-12-19 14:11:57)

DFOwl · 2020-12-19 14:21:48

Trilby wrote:

DFOwl wrote:
this computer shows up with an ipv6 rather than ipv4 in the connected ips section. Might this lend any clues?
That was my suspicion based on your first post and the reason you can ping "google.com" but not 8.8.8.8. I'd bet you can successfully ping 2607:f8b0:4009:800::200e which is google's ipv6 address.
Please specify the protocol in ping for tests to confirm:
ping -4 google.com
ping -4 8.8.8.8
ping -6 google.com
ping -6 2607:f8b0:4009:800::200e

ping -4 google.com yields "Destination Host Unreachable"
ping -4 8.8.8.8 Same result
ping -6 google.com yields successful pings, albeit really slow. For example, there's around 5 seconds between every ping. The report says 8.3% packet loss.
ping -6 2607:f8b0:4009:800::200e yields successful pings AND at a normal speed as expected with a good internet connection. This is how all websites ping for me normally on this machine and the one I am talking to you from.

Perhaps pacman also connects to its databse via ipv6, and that's why I can make those updates despite not having internet...

Trilby · 2020-12-19 14:32:58

You DO have an inernet connection, just no (or very limited / problematic) ipv4, and this seems specific to networkmanager as the same hardware on the same router works well when booted into the iso which does not use networkmanager.

Unfortunately I have absolutely no experience with networkmanager, but if you revise your thread title to specify the problem along the lines of "NetworkManager no IPv4" you might attract more attention from those equipped to further troubleshoot with N.M.

I suspect a complete output from `ip a` might also be useful for that purpose.

DFOwl · 2020-12-19 14:42:28

Trilby wrote:

I suspect a complete output from `ip a` might also be useful for that purpose.

Here's the output:

 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 18:65:90:cb:46:c7 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.144/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp3s0
       valid_lft 602840sec preferred_lft 602840sec
    inet6 2600:6c65:7b80:2996::767/128 scope global dynamic noprefixroute 
       valid_lft 498488sec preferred_lft 498488sec
    inet6 2600:6c65:7b80:2996:dd3f:2929:bee0:2740/64 scope global dynamic noprefixroute 
       valid_lft 302799sec preferred_lft 302799sec
    inet6 fe80::e0a3:5d4e:3061:568/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

Lone_Wolf · 2020-12-19 15:04:11

Could be a routing issue, but a hostname resolution issue matches description better.

Post the content of your /etc/NetworkManager/conf.d/dns.conf file , as well as the output of

$ ip -4 route
$ ip -6 route

Last edited by Lone_Wolf (2020-12-19 15:05:43)

seth · 2020-12-19 15:04:22

ip r
cat /etc/resolv.conf
dig -6 google.com

What IP does "ping -6 google.com" resolve to?

Edit, one more thing: please check whether the archiso does use the wl module for your device (lspci -k)

Last edited by seth (2020-12-19 15:50:23)

DFOwl · 2020-12-19 16:06:08

Here are the commands from the laptop install:

===ip -4 route===
default via 192.168.1.1 dev wlp3s0 proto dhcp metric 600 
192.168.1.0/24 dev wlp3s0 proto kernel scope link src 192.168.1.144 metric 600 

===ip -6 route===
::1 dev lo proto kernel metric 256 pref medium
2600:6c65:7b80:2996::767 dev wlp3s0 proto kernel metric 600 pref medium
2600:6c65:7b80:2996::/64 via fe80::9691:7fff:fe23:e3ea dev wlp3s0 proto ra metric 600 pref medium
fe80::/64 dev wlp3s0 proto kernel metric 600 pref medium
default via fe80::9691:7fff:fe23:e3ea dev wlp3s0 proto ra metric 600 pref medium

===ip r===
default via 192.168.1.1 dev wlp3s0 proto dhcp metric 600 
192.168.1.0/24 dev wlp3s0 proto kernel scope link src 192.168.1.144 metric 600 

===cat /etc/resolv.conf===
# Generated by NetworkManager
search lan1
nameserver 192.168.1.1
nameserver 2607:f428:ffff:ffff::1
nameserver 2607:f428:ffff:ffff::2
# NOTE: the libc resolver may not support more than 3 nameservers.
# The nameservers listed below may not be recognized.
nameserver fe80::9691:7fff:fe23:e3ea%wlp3s0

===dig -6 google.com===

; <<>> DiG 9.16.9 <<>> -6 google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 23714
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;google.com.			IN	A

;; ANSWER SECTION:
google.com.		154	IN	A	216.58.192.142

;; Query time: 26 msec
;; SERVER: 2607:f428:ffff:ffff::1#53(2607:f428:ffff:ffff::1)
;; WHEN: Sat Dec 19 11:03:09 EST 2020
;; MSG SIZE  rcvd: 55

When I run lspci -k | grep wl I get the output "Kernel modules: brcmfmac, wl", so it appears as though it uses both?
What confuses me is that when I install wl, the ip link device disappears.

EDIT:
Just tried installing the broadcom-wl package. After reboot, wlp3s0 disappears, but kernel modules has wl.

Last edited by DFOwl (2020-12-19 16:20:30)

DFOwl · 2020-12-19 18:24:58

I just ran lspci -vnn -d 14e4 on the archiso, and it has this:

Kernel driver in use brcmfmac
Kernel modules: brcmfmac, wl

So it seems as if the archiso does have wl, however, it uses brcmfmac, which my system already has?
Does this help at all?

DFOwl · 2020-12-19 18:40:58

I tried stopping Network Manager and installing iwctl. The results.... well, I can scan for networks but not connect to them.

EDIT:

Restarted system and installed wl again. This time I ran the command checking whether the module is loaded and it was not! I don't quite understand why it won't load, and I tried doing modprobe and all.

Last edited by DFOwl (2020-12-19 18:50:46)

seth · 2020-12-19 23:04:49

You can ignore the wl situation, I just wanted to rule out that we're dealing w/ 2 problems (IPv6 and wonky NIC) at the same time.

I can scan for networks but not connect to them.

That's not an error message - what exactly happens?

Regarding NM, try to remove the IPv4 nameserver from resolv.conf and test the behavior.

DFOwl · 2020-12-19 23:18:09

I just deleted the resolv.conf and restarted my system. Nothing happened, but right now I am on the good network at a different household. Once I get back to the old environment I will do it again.

And about iw, basically when I say station scan and get-networks, it lists the networks. When I prompt the program to connect to the desired network and input the password, it would spend several seconds connecting. After about 15 seconds it would say "operation failed" or something to that effect.

GSMiller · 2020-12-21 19:28:38

DFOwl, NetworkManager can be problematic with ipv4. But it could also be a nameserver. Test other nameservers.

DFOwl · 2020-12-23 18:57:18

Ok so, while I was visiting another household, my laptop's internet magically began working like nothing ever was a problem. I thought that this might fix it. However, it did not; I just booted up my laptop at home, and it's internet stopped working here. I think this might be more of a router issue rather than anything wrong with NM.

However, you say try different nameservers. How am I to do that?

DFOwl · 2020-12-23 19:03:00

Ok I went into resolv.conf and it has multiple nameservers for ipv6, and only one for ipv4. Should I delete the line for ipv4?

seth · 2020-12-23 20:53:31

Commenting it will do and yes-ish.
The IPv6 DNS resolves IPv4 as well, so that won't be a problem, but the proper way would be to configure that in network manager (since it'll likely rewrite the resolv.conf on every startup)

Also please try (assuming 192.168.1.1 is still the IPv4 nameserver)

dig @192.168.1.1 -t AAAA google.com

DFOwl · 2020-12-24 01:29:56

seth wrote:

Commenting it will do and yes-ish.
The IPv6 DNS resolves IPv4 as well, so that won't be a problem, but the proper way would be to configure that in network manager (since it'll likely rewrite the resolv.conf on every startup)
Also please try (assuming 192.168.1.1 is still the IPv4 nameserver)
dig @192.168.1.1 -t AAAA google.com

I am unable to do this right now, as until Christmas I am in a different household. Once I get home, I will do this. However, I discovered that the resolv file greatly differs between by home network and the one that I am using as a guest here. Do you think this might be a problem with the router itself or with the computer?

seth · 2020-12-24 08:17:25

I discovered that the resolv file greatly differs between by home network and the one that I am using as a guest here

That's "normal" - the resolver information is (unless explicitly specified) usually obtained via dhcp from the router.

Arch Linux

#1 2020-12-19 13:37:46

IPv4 Doesn't work on Home Network

#2 2020-12-19 13:45:57

Re: IPv4 Doesn't work on Home Network

#3 2020-12-19 14:04:19

Re: IPv4 Doesn't work on Home Network

#4 2020-12-19 14:11:46

Re: IPv4 Doesn't work on Home Network

#5 2020-12-19 14:21:48

Re: IPv4 Doesn't work on Home Network

#6 2020-12-19 14:32:58

Re: IPv4 Doesn't work on Home Network

#7 2020-12-19 14:42:28

Re: IPv4 Doesn't work on Home Network

#8 2020-12-19 15:04:11

Re: IPv4 Doesn't work on Home Network

#9 2020-12-19 15:04:22

Re: IPv4 Doesn't work on Home Network

#10 2020-12-19 16:06:08

Re: IPv4 Doesn't work on Home Network

#11 2020-12-19 18:24:58

Re: IPv4 Doesn't work on Home Network

#12 2020-12-19 18:40:58

Re: IPv4 Doesn't work on Home Network

#13 2020-12-19 23:04:49

Re: IPv4 Doesn't work on Home Network

#14 2020-12-19 23:18:09

Re: IPv4 Doesn't work on Home Network

#15 2020-12-21 19:28:38

Re: IPv4 Doesn't work on Home Network

#16 2020-12-23 18:57:18

Re: IPv4 Doesn't work on Home Network

#17 2020-12-23 19:03:00

Re: IPv4 Doesn't work on Home Network

#18 2020-12-23 20:53:31

Re: IPv4 Doesn't work on Home Network

#19 2020-12-24 01:29:56

Re: IPv4 Doesn't work on Home Network

#20 2020-12-24 08:17:25

Re: IPv4 Doesn't work on Home Network

Board footer