You are not logged in.
I upgraded my system yesterday, rebooted and the sound completely stopped working showing only "Dummy output" in pavucontrol. After a quick forum search I found out that I had to install `sof-firmware`. And now, instead of "Analog Output" in pavucontrol I get "Cannon Lake PCH cAVS HDMI #" outputs and one "Cannon Lake PCH cAVS Speaker + Heaphones" where I can switch between internal speaker and headphones. Now the problem is with 2 items in Input Devices: "Headphones Stereo Microphone" is shown and it's not headphone mic but internal mic, and "Digital Microphone" that doesn't ever output anything.
How do I switch to headphone mic? I tried messing with `hdajackretask` but it didn't work as I didn't even know what I'm doing. Why's internal mic identified as headphone?
im useless
Offline
pulseaudio-zeroconf?
Offline
zeroconf is for networking support/raop it's not going to have an effect for local hardware issues.
@kurwa123
Post in
[code]code tags[/code]
the outputs of
arecord -l
amixer -c0 #Or the index of the arecord command instead of 0
pacmd list-cards
pacmd list-sources
pacmd list-source-outputs
during a recording attempt. FWIW sof-firmware and the associated alsa-ucm-conf configurations are quite young and potentially buggy so you might run into an actual issue with these here. We'll need to see these outputs to check what's detected how and where.
If this used to work and the fact that it tries to use sof and the digital mic here a misdetection you might also try something like a /etc/modprobe.d/dsp.conf
options snd-intel-dspcfg dsp_driver=1
to enforce a fallback to the old snd-hda-intel logic. But I'm not sure for how long this fallback is intended to be actively supported.
Last edited by V1del (2021-02-18 15:58:27)
Offline
arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: sofhdadsp [sof-hda-dsp], device 0: HDA Analog (*) []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: sofhdadsp [sof-hda-dsp], device 1: HDA Digital (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: sofhdadsp [sof-hda-dsp], device 6: DMIC (*) []
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: sofhdadsp [sof-hda-dsp], device 7: DMIC16kHz (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
amixer -c0
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xa4080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fb9"
device.product.name = "GP107GL High Definition Audio Controller"
device.string = "0"
device.description = "GP107GL High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Wyjście Digital Stereo (HDMI) (priority 5900, available: no)
output:hdmi-surround: Wyjście Digital Surround 5.1 (HDMI) (priority 800, available: no)
output:hdmi-surround71: Wyjście Digital Surround 7.1 (HDMI) (priority 800, available: no)
output:hdmi-stereo-extra1: Wyjście Digital Stereo (HDMI 2) (priority 5700, available: no)
output:hdmi-surround-extra1: Wyjście Digital Surround 5.1 (HDMI 2) (priority 600, available: no)
output:hdmi-surround71-extra1: Wyjście Digital Surround 7.1 (HDMI 2) (priority 600, available: no)
output:hdmi-stereo-extra2: Wyjście Digital Stereo (HDMI 3) (priority 5700, available: no)
output:hdmi-surround-extra2: Wyjście Digital Surround 5.1 (HDMI 3) (priority 600, available: no)
output:hdmi-surround71-extra2: Wyjście Digital Surround 7.1 (HDMI 3) (priority 600, available: no)
output:hdmi-stereo-extra3: Wyjście Digital Stereo (HDMI 4) (priority 5700, available: no)
output:hdmi-surround-extra3: Wyjście Digital Surround 5.1 (HDMI 4) (priority 600, available: no)
output:hdmi-surround71-extra3: Wyjście Digital Surround 7.1 (HDMI 4) (priority 600, available: no)
off: Wyłączone (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "1"
device.description = "Cannon Lake PCH cAVS"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
HiFi: Play HiFi quality Music (priority 8000, available: unknown)
off: Wyłączone (priority 0, available: unknown)
active profile: <HiFi>
sinks:
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink/#0: Cannon Lake PCH cAVS HDMI3 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink/#1: Cannon Lake PCH cAVS HDMI2 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink/#2: Cannon Lake PCH cAVS HDMI1 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink/#3: Cannon Lake PCH cAVS Speaker + Headphones
sources:
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink.monitor/#0: Monitor of Cannon Lake PCH cAVS HDMI3 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink.monitor/#1: Monitor of Cannon Lake PCH cAVS HDMI2 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink.monitor/#2: Monitor of Cannon Lake PCH cAVS HDMI1 Output
alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink.monitor/#3: Monitor of Cannon Lake PCH cAVS Speaker + Headphones
alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__source/#4: Cannon Lake PCH cAVS Headphones Stereo Microphone
alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_6__source/#5: Cannon Lake PCH cAVS Digital Microphone
ports:
[Out] HDMI3: HDMI3 Output (priority 700, latency offset 0 usec, available: no)
properties:
[Out] HDMI2: HDMI2 Output (priority 600, latency offset 0 usec, available: no)
properties:
[Out] HDMI1: HDMI1 Output (priority 500, latency offset 0 usec, available: no)
properties:
[Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown)
properties:
[Out] Headphones: Headphones (priority 200, latency offset 0 usec, available: unknown)
properties:
[In] Mic2: Headphones Stereo Microphone (priority 200, latency offset 0 usec, available: unknown)
properties:
[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
properties:
pacmd list-sources
6 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 7 KiB
sample spec: s16le 2 k 48000 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 341,00 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
device.description = "Monitor of Cannon Lake PCH cAVS HDMI3 Output"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 7 KiB
sample spec: s16le 2 k 48000 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 341,00 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
device.description = "Monitor of Cannon Lake PCH cAVS HDMI2 Output"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 7 KiB
sample spec: s16le 2 k 48000 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 341,00 ms
monitor_of: 2
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
device.description = "Monitor of Cannon Lake PCH cAVS HDMI1 Output"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 3
name: <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max rewind: 7 KiB
sample spec: s16le 2 k 48000 Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 40,00 ms; range is 0,50 .. 341,00 ms
monitor_of: 3
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
device.description = "Monitor of Cannon Lake PCH cAVS Speaker + Headphones"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 4
name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__source>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9032
volume: front-left: 37185 / 57% / -14,77 dB, front-right: 37185 / 57% / -14,77 dB
balance 0,00
base volume: 20724 / 32% / -30,00 dB
volume steps: 65537
muted: yes
current latency: 2,87 ms
max rewind: 0 KiB
sample spec: s16le 2 k 48000 Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 341,00 ms
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "HDA Analog (*)"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "hw:sofhdadsp"
device.buffering.buffer_size = "65472"
device.buffering.fragment_size = "16320"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:sofhdadsp: source"
device.profile.description = "Headphones Stereo Microphone"
alsa.mixer_device = "hw:sofhdadsp"
device.description = "Cannon Lake PCH cAVS Headphones Stereo Microphone"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
[In] Mic2: Headphones Stereo Microphone (priority 200, latency offset 0 usec, available: unknown)
properties:
active port: <[In] Mic2>
index: 5
name: <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_6__source>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9031
volume: front-left: 29274 / 45% / -21,00 dB, front-right: 29274 / 45% / -21,00 dB, rear-left: 30419 / 46% / -20,00 dB, rear-right: 30419 / 46% / -20,00 dB
balance 0,00
base volume: 30419 / 46% / -20,00 dB
volume steps: 65537
muted: yes
current latency: 12,67 ms
max rewind: 0 KiB
sample spec: s16le 4 k 48000 Hz
channel map: front-left,front-right,rear-left,rear-right
Przestrzenne 4.0
used by: 1
linked by: 1
configured latency: 40,00 ms; range is 2,00 .. 170,50 ms
card: 1 <alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "DMIC (*)"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "6"
alsa.card = "1"
alsa.card_name = "sof-hda-dsp"
alsa.long_card_name = "ASUSTeKCOMPUTERINC.-TUFGamingFX705GE_FX705GE-1.0-FX705GE"
alsa.driver_name = "snd_soc_skl_hda_dsp"
device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.string = "hw:sofhdadsp,6"
device.buffering.buffer_size = "65472"
device.buffering.fragment_size = "16320"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:sofhdadsp,6: source"
device.profile.description = "Digital Microphone"
alsa.mixer_device = "hw:sofhdadsp"
device.description = "Cannon Lake PCH cAVS Digital Microphone"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
[In] Mic1: Digital Microphone (priority 100, latency offset 0 usec, available: unknown)
properties:
active port: <[In] Mic1>
pacmd list-source-outputs
7 source output(s) available.
index: 0
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 0 <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_5__sink.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 18,27 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 1
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 1 <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_4__sink.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 24,54 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 2
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 2 <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_3__sink.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 21,48 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 3
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 3 <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 9,27 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 4
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 4 <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__source>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 0,00 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 5
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 5 <alsa_input.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp_6__source>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 0,00 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
index: 321
driver: <protocol-native.c>
flags: DONT_MOVE
state: RUNNING
source: 3 <alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__hw_sofhdadsp__sink.monitor>
volume: mono: 65536 / 100% / 0,00 dB
balance 0,00
muted: no
current latency: 9,29 ms
requested latency: 40,00 ms
sample spec: float32le 1 k 25 Hz
channel map: mono
Mono
resample method: peaks
owner module: 12
client: 4 <Sterowanie głośnością PulseAudio>
direct on input: 353
properties:
media.name = "Wykrywanie szczytów"
application.name = "Sterowanie głośnością PulseAudio"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "4.0"
application.process.id = "743"
application.process.user = "mishqutin"
application.process.host = "smietana"
application.process.binary = "pavucontrol"
application.language = "pl_PL.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "d0681c52a550455697b284a95ce7b705"
application.process.session_id = "1"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
im useless
Offline
Thank you!
options snd-intel-dspcfg dsp_driver=1
This worked and I think I'm gonna stick with it.
But I'm not sure for how long this fallback is intended to be actively supported.
What can I do about it now?
im useless
Offline
If you want to stick to it stick to it, this changeover just happened and there are still loads of snd-hda-intel cards that don't use sof-firmware I'm assuming that this relevant logic will be available for quite a while. FWIW every single one of the sof provided mics is muted in that output so that might well be the issue and you could try disabling the option again and then explicitly unmuting the mics.
Last edited by V1del (2021-02-18 18:06:25)
Offline