You are not logged in.
I have installed arch linux just like showed in the installation guide, but everytime I want to boot the system it drops me to the rescue shell.
I use grub and it works fine.
But after it loads the kernel and initrd there appears this:
Starting version 249.1-1-arch
ERROR: device `UUID=59fe0...` not found. Skipping fsck.
mount: /new_root: can't find UUID=59fe0... .
You are now being dropped into an emergency shell.
sh: can't access tty; job control turned off
[rootfs ]#Somehow my NVMe disk gets not recognized.
ls /devshows no nvme* device.
On all other system I can access the nvme. The arch install iso, manjaro, ubuntu, etc. There
lspci -vshows at the end:
1000:e1:00.0 Non-Volatile memory controller: Intel Corporation Device 0975 (rev 03) (prog-if 02 [NVM Express]
Subsystem: Intel Corporation Device 8410
Flags: bus master, fast devsel, latency 0, IRQ -2147483648, NUMA node 0
Memory at 82000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [158] Secondary PCI Express
Capabilities: [178] Latency Tolerancy Reporting
Capabilities: [180] L1 PM Substates
Kernel driver in use: nvme
1000:e2:00.0 Non-Volatile memory controller: Intel Corporation Device 0975 (rev 03) (prog-if 02 [NVM Express]
Subsystem: Intel Corporation Device 8510
Flags: bus master, fast devsel, latency 0, IRQ -2147483648, NUMA node 0
Memory at 82100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [a0] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Secondary PCI Express
Capabilities: [180] Latency Tolerancy Reporting
Capabilities: [190] L1 PM Substates
Capabilities: [2a0] Secondary PCI Express
Capabilities: [2d0] Latency Tolerance Reporting
Capabilities: [310] L1 PM Substates
Kernel driver in use: nvmenvme list shows this:
Node | SN | Model | Namespace | Usage | Format | FW Rev
/dev/nvme0n1 | BTTE00230JS8512B-1 | INTEL HBRPEKNX0202A | 1 | 512.11 GB /512.11 GB | 512 B + 0 B | G002
/dev/nvme1n1 | BTTE00230JS8512B-2 | INTEL HBRPEKNX0202AO | 1 | 29.26 GB / 29.26 GB | 512 B + 0 B | K5110440intelmas show -intelssd shows this:
- 0 Intel SSD BTTE00230JS8512B-1 -
Capacity : 512.11 GB
DevicePath : /dev/nvme0n1
DeviceStatus : Healthy
Firmware : G002
FirmwareUpdateAvailable : The selected drive contains firmware as of this tool release.
Index : 0
MaximumLBA : 1000215215
PercentOverProvisioned : Property not found
ProductFamily : Intel SSD
SMARTEnabled : True
SectorDataSize : 512
SerialNumber : BTTE00230JS8512B-1
- 1 Intel Optane(TM) Memory Series BTTE00230JS8512B-2 -
BootLoader : JFCB1421
Capacity : 29.26 GB
DevicePath : /dev/nvme1n1
DeviceStatus : Healthy
Firmware : K5110440
FirmwareUpdateAvailable : The selected drive contains firmware as of this tool release.
Index : 1
MaximumLBA : 57149439
PercentOverProvisioned : 100.00
ProductFamily : Intel Optane(TM) Memory Series
SMARTEnabled : True
SectorDataSize : 512
SerialNumber : BTTE00230JS8512B-2On the large disk I have my root filesystem. I have disabled the optane technology in the bios. I can use the smaller drive just as a normal second nvme only with significant more speed (I have checked it with hdparm).
I have also inserted nvme and lspci into the initrd.
lscpi shows only a bunch of
00:1f.5 Class 0c80: Device 8086:a0a4 (rev 20) and similar lines.
nvme detects no disks.
My computer is an Asus Vivobook 14 s413ea-eb094t.
I hope anybody can help me. I would like it to have arch linux on my laptop, and not any other distro.
Offline
I have now tried to install manjaro and ubuntu. Manjaro installs fine, but then cannot but as equal to arch, and ubuntu has no problems at all.
Offline
Offline
Yes, that solved it. Thanks!
Offline