You are not logged in.
- Topics: Active | Unanswered
#26 2021-07-24 22:25:59
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Sure, here's the Xorg.0.log.old from ~ w/o intel driver or 'xorg.conf*' :
[ 3438.675] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 3438.679]
X.Org X Server 1.20.12
X Protocol Version 11, Revision 0
[ 3438.690] Build Operating System: Linux Archlinux
[ 3438.692] Current Operating System: Linux archbox 5.13.4-arch1-1 #1 SMP PREEMPT Tue, 20 Jul 2021 16:58:51 +0000 x86_64
[ 3438.692] Kernel command line: BOOT_IMAGE=blah... audit=0 quiet resume udev.log_priority=3
[ 3438.700] Build Date: 08 July 2021 08:00:40PM
[ 3438.703]
[ 3438.706] Current version of pixman: 0.40.0
[ 3438.711] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3438.711] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3438.722] (==) Log file: "/home/myuser/.local/share/xorg/Xorg.0.log", Time: Sun Jul 25 00:01:54 2021
[ 3438.725] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3438.728] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3438.729] (==) No Layout section. Using the first Screen section.
[ 3438.729] (==) No screen section available. Using defaults.
[ 3438.729] (**) |-->Screen "Default Screen Section" (0)
[ 3438.729] (**) | |-->Monitor "<default monitor>"
[ 3438.729] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3438.729] (==) Automatically adding devices
[ 3438.729] (==) Automatically enabling devices
[ 3438.729] (==) Automatically adding GPU devices
[ 3438.729] (==) Automatically binding GPU devices
[ 3438.729] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3438.729] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 3438.729] Entry deleted from font path.
[ 3438.729] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 3438.729] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3438.729] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3438.729] (II) Module ABI versions:
[ 3438.729] X.Org ANSI C Emulation: 0.4
[ 3438.729] X.Org Video Driver: 24.1
[ 3438.729] X.Org XInput driver : 24.1
[ 3438.729] X.Org Server Extension : 10.0
[ 3438.730] (++) using VT number 1
[ 3438.732] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 3438.733] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3438.734] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 3438.738] (--) PCI:*(0@0:2:0) 8086:29d2:1734:10fc rev 2, Mem @ 0xf0200000/524288, 0xe0000000/268435456, 0xf0000000/1048576, I/O @ 0x00001c40/8, BIOS @ 0x????????/131072
[ 3438.738] (--) PCI: (0@0:2:1) 8086:29d3:1734:10fc rev 2, Mem @ 0xf0300000/524288
[ 3438.738] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3438.738] (II) LoadModule: "glx"
[ 3438.739] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3438.741] (II) Module glx: vendor="X.Org Foundation"
[ 3438.741] compiled for 1.20.12, module version = 1.0.0
[ 3438.741] ABI class: X.Org Server Extension, version 10.0
[ 3438.741] (==) Matched intel as autoconfigured driver 0
[ 3438.741] (==) Matched modesetting as autoconfigured driver 1
[ 3438.741] (==) Matched fbdev as autoconfigured driver 2
[ 3438.741] (==) Matched vesa as autoconfigured driver 3
[ 3438.741] (==) Assigned the driver to the xf86ConfigLayout
[ 3438.741] (II) LoadModule: "intel"
[ 3438.741] (WW) Warning, couldn't open module intel
[ 3438.741] (EE) Failed to load module "intel" (module does not exist, 0)
[ 3438.741] (II) LoadModule: "modesetting"
[ 3438.741] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3438.742] (II) Module modesetting: vendor="X.Org Foundation"
[ 3438.742] compiled for 1.20.12, module version = 1.20.12
[ 3438.742] Module class: X.Org Video Driver
[ 3438.742] ABI class: X.Org Video Driver, version 24.1
[ 3438.742] (II) LoadModule: "fbdev"
[ 3438.742] (WW) Warning, couldn't open module fbdev
[ 3438.742] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3438.742] (II) LoadModule: "vesa"
[ 3438.742] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3438.742] (II) Module vesa: vendor="X.Org Foundation"
[ 3438.742] compiled for 1.20.9, module version = 2.5.0
[ 3438.742] Module class: X.Org Video Driver
[ 3438.742] ABI class: X.Org Video Driver, version 24.1
[ 3438.742] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3438.742] (II) VESA: driver for VESA chipsets: vesa
[ 3438.742] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 3438.742] (II) modeset(0): using drv /dev/dri/card0
[ 3438.742] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 3438.742] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3438.742] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 3438.743] (==) modeset(0): RGB weight 888
[ 3438.743] (==) modeset(0): Default visual is TrueColor
[ 3438.743] (II) Loading sub module "glamoregl"
[ 3438.743] (II) LoadModule: "glamoregl"
[ 3438.743] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3438.747] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3438.747] compiled for 1.20.12, module version = 1.0.1
[ 3438.747] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3438.767] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Q33
[ 3438.767] (II) modeset(0): glamor initialized
[ 3438.774] (II) modeset(0): Output VGA-1 has no monitor section
[ 3438.899] (II) modeset(0): Output DVI-D-1 has no monitor section
[ 3438.907] (II) modeset(0): EDID for output VGA-1
[ 3439.031] (II) modeset(0): EDID for output DVI-D-1
[ 3439.031] (II) modeset(0): Manufacturer: ACI Model: 24e1 Serial#: 16843009
[ 3439.031] (II) modeset(0): Year: 2017 Week: 29
[ 3439.031] (II) modeset(0): EDID Version: 1.3
[ 3439.031] (II) modeset(0): Digital Display Input
[ 3439.031] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 3439.032] (II) modeset(0): Gamma: 2.20
[ 3439.032] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 3439.032] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3439.032] (II) modeset(0): First detailed timing is preferred mode
[ 3439.032] (II) modeset(0): redX: 0.650 redY: 0.329 greenX: 0.331 greenY: 0.622
[ 3439.032] (II) modeset(0): blueX: 0.151 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 3439.032] (II) modeset(0): Supported established timings:
[ 3439.032] (II) modeset(0): 720x400@70Hz
[ 3439.032] (II) modeset(0): 640x480@60Hz
[ 3439.032] (II) modeset(0): 640x480@67Hz
[ 3439.032] (II) modeset(0): 640x480@75Hz
[ 3439.032] (II) modeset(0): 800x600@56Hz
[ 3439.032] (II) modeset(0): 800x600@60Hz
[ 3439.032] (II) modeset(0): 800x600@72Hz
[ 3439.032] (II) modeset(0): 800x600@75Hz
[ 3439.032] (II) modeset(0): 832x624@75Hz
[ 3439.032] (II) modeset(0): 1024x768@60Hz
[ 3439.032] (II) modeset(0): 1024x768@70Hz
[ 3439.032] (II) modeset(0): 1024x768@75Hz
[ 3439.032] (II) modeset(0): 1280x1024@75Hz
[ 3439.032] (II) modeset(0): Manufacturer's mask: 0
[ 3439.032] (II) modeset(0): Supported standard timings:
[ 3439.032] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 3439.032] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 3439.032] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 3439.032] (II) modeset(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 3439.032] (II) modeset(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 3439.032] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 3439.032] (II) modeset(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 3439.032] (II) modeset(0): Supported detailed timing:
[ 3439.032] (II) modeset(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 3439.032] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 3439.032] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 3439.032] (II) modeset(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 160 kHz, PixClock max 335 MHz
[ 3439.032] (II) modeset(0): Monitor name: VG248
[ 3439.032] (II) modeset(0): Serial No: H7LMQS090485
[ 3439.032] (II) modeset(0): Supported detailed timing:
[ 3439.032] (II) modeset(0): clock: 198.5 MHz Image Size: 531 x 299 mm
[ 3439.032] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 3439.032] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1124 v_border: 0
[ 3439.032] (II) modeset(0): Supported detailed timing:
[ 3439.032] (II) modeset(0): clock: 235.5 MHz Image Size: 531 x 299 mm
[ 3439.032] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 3439.032] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1133 v_border: 0
[ 3439.032] (II) modeset(0): Supported detailed timing:
[ 3439.032] (II) modeset(0): clock: 285.5 MHz Image Size: 531 x 299 mm
[ 3439.032] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 3439.032] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1144 v_border: 0
[ 3439.032] (II) modeset(0): Supported detailed timing:
[ 3439.032] (II) modeset(0): clock: 325.1 MHz Image Size: 531 x 299 mm
[ 3439.032] (II) modeset(0): h_active: 1920 h_sync: 1944 h_sync_end 1976 h_blank_end 2056 h_border: 0
[ 3439.032] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1098 v_border: 0
[ 3439.032] (II) modeset(0): Number of EDID sections to follow: 1
[ 3439.032] (II) modeset(0): EDID (in hex):
[ 3439.033] (II) modeset(0): 00ffffffffffff000469e12401010101
[ 3439.033] (II) modeset(0): 1d1b010380351e78ea9de5a654549f26
[ 3439.033] (II) modeset(0): 0d5054b7ef00714f8180814081c08100
[ 3439.033] (II) modeset(0): 9500b3000101023a801871382d40582c
[ 3439.033] (II) modeset(0): 4500132b2100001e000000fd0032961e
[ 3439.033] (II) modeset(0): a021000a202020202020000000fc0056
[ 3439.033] (II) modeset(0): 473234380a20202020202020000000ff
[ 3439.033] (II) modeset(0): 0048374c4d51533039303438350a01e6
[ 3439.033] (II) modeset(0): 020104008a4d80a070382c4030203500
[ 3439.033] (II) modeset(0): 132b2100001afe5b80a0703835403020
[ 3439.033] (II) modeset(0): 3500132b2100001a866f80a070384040
[ 3439.033] (II) modeset(0): 30203500132b2100001afc7e80887038
[ 3439.033] (II) modeset(0): 124018203500132b2100001e00000000
[ 3439.033] (II) modeset(0): 00000000000000000000000000000000
[ 3439.033] (II) modeset(0): 00000000000000000000000000000000
[ 3439.033] (II) modeset(0): 000000000000000000000000000000bb
[ 3439.033] (II) modeset(0): Printing probed modes for output DVI-D-1
[ 3439.033] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 3439.033] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 3439.033] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 3439.033] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 3439.033] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 3439.033] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 3439.033] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 3439.033] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 3439.033] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 3439.033] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 3439.033] (II) modeset(0): Output VGA-1 disconnected
[ 3439.033] (II) modeset(0): Output DVI-D-1 connected
[ 3439.033] (II) modeset(0): Using exact sizes for initial modes
[ 3439.033] (II) modeset(0): Output DVI-D-1 using initial mode 1920x1080 +0+0
[ 3439.033] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3439.033] (==) modeset(0): DPI set to (96, 96)
[ 3439.033] (II) Loading sub module "fb"
[ 3439.033] (II) LoadModule: "fb"
[ 3439.034] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3439.034] (II) Module fb: vendor="X.Org Foundation"
[ 3439.034] compiled for 1.20.12, module version = 1.0.0
[ 3439.034] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3439.034] (II) UnloadModule: "vesa"
[ 3439.034] (II) Unloading vesa
[ 3439.034] Require OpenGL version 2.1 or later.
[ 3439.034] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[ 3439.034] (EE)
Fatal server error:
[ 3439.034] (EE) AddScreen/ScreenInit failed for driver 0
[ 3439.034] (EE)
[ 3439.034] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3439.034] (EE) Please also check the log file at "/home/myuser/.local/share/xorg/Xorg.0.log" for additional information.
[ 3439.035] (EE)
[ 3439.057] (EE) Server terminated with error (1). Closing log file.Offline
#27 2021-07-25 06:25:12
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Modeset fails because of glamor because of lacking GL2.1 support
[ 3439.034] Require OpenGL version 2.1 or later.
[ 3439.034] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[ 3439.034] (EE) Please post the xorg log of the manjaro system, but I'm pretty sure that they just enable GL2.1 for the chip - maybe there's some kernel parameter (there's usually a truckload of them defaulted on manjaro systems)
Offline
#28 2021-07-25 09:30:34
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
The xorg.0.log from the other pc, identical model and GPU, but w/ Manjaro, loaded intel drivers, and properly working OpenGL:
[ 368.324]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 368.324] Build Operating System: Linux Manjaro Linux
[ 368.324] Current Operating System: Linux manjarobox 5.10.52-1-MANJARO #1 SMP PREEMPT Tue Jul 20 20:32:02 UTC 2021 x86_64
[ 368.324] Kernel command line: BOOT_IMAGE=bleh... audit=0 quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
[ 368.324] Build Date: 13 April 2021 04:11:08PM
[ 368.324]
[ 368.324] Current version of pixman: 0.40.0
[ 368.324] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 368.324] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 368.324] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 25 10:22:03 2021
[ 368.325] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 368.325] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 368.325] (==) ServerLayout "ServerLayout0"
[ 368.325] (==) No screen section available. Using defaults.
[ 368.325] (**) |-->Screen "Default Screen Section" (0)
[ 368.325] (**) | |-->Monitor "<default monitor>"
[ 368.325] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 368.325] (**) | |-->Device "Intel Grahpics"
[ 368.325] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 368.325] (**) Option "BlankTime" "0"
[ 368.325] (**) Option "StandbyTime" "0"
[ 368.325] (**) Option "SuspendTime" "0"
[ 368.325] (**) Option "OffTime" "0"
[ 368.325] (==) Automatically adding devices
[ 368.325] (==) Automatically enabling devices
[ 368.325] (==) Automatically adding GPU devices
[ 368.325] (==) Automatically binding GPU devices
[ 368.325] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 368.325] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 368.325] Entry deleted from font path.
[ 368.325] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 368.325] Entry deleted from font path.
[ 368.326] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1
[ 368.326] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 368.326] (**) Extension "DPMS" is enabled
[ 368.326] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 368.326] (II) Module ABI versions:
[ 368.326] X.Org ANSI C Emulation: 0.4
[ 368.326] X.Org Video Driver: 24.1
[ 368.326] X.Org XInput driver : 24.1
[ 368.326] X.Org Server Extension : 10.0
[ 368.327] (++) using VT number 7
[ 368.327] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 368.327] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 368.337] (--) PCI:*(0@0:2:0) 8086:29d2:1734:10fc rev 2, Mem @ 0xf0200000/524288, 0xe0000000/268435456, 0xf0000000/1048576, I/O @ 0x00001c40/8, BIOS @ 0x????????/131072
[ 368.338] (--) PCI: (0@0:2:1) 8086:29d3:1734:10fc rev 2, Mem @ 0xf0300000/524288
[ 368.338] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 368.338] (II) LoadModule: "glx"
[ 368.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 368.340] (II) Module glx: vendor="X.Org Foundation"
[ 368.340] compiled for 1.20.11, module version = 1.0.0
[ 368.340] ABI class: X.Org Server Extension, version 10.0
[ 368.340] (II) LoadModule: "intel"
[ 368.340] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 368.340] (II) Module intel: vendor="X.Org Foundation"
[ 368.340] compiled for 1.20.10, module version = 2.99.917
[ 368.340] Module class: X.Org Video Driver
[ 368.340] ABI class: X.Org Video Driver, version 24.1
[ 368.340] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 368.341] (II) intel: Driver for Intel(R) HD Graphics
[ 368.341] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 368.341] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 368.341] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200917
[ 368.341] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 368.357] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q33
[ 368.357] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1; using a maximum of 2 threads
[ 368.357] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 368.357] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 368.357] (==) intel(0): RGB weight 888
[ 368.357] (==) intel(0): Default visual is TrueColor
[ 368.357] (**) intel(0): Option "DRI" "3"
[ 368.357] (II) intel(0): Output VGA1 using monitor section VGA1
[ 368.357] (II) intel(0): Enabled output VGA1
[ 368.357] (II) intel(0): Output DVI1 has no monitor section
[ 368.358] (II) intel(0): Enabled output DVI1
[ 368.358] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 368.358] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 368.358] (II) intel(0): Enabled output VIRTUAL1
[ 368.358] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0
[ 368.358] (--) intel(0): Output DVI1 using initial mode 1920x1080 on pipe 1
[ 368.358] (==) intel(0): TearFree disabled
[ 368.358] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 368.358] (==) intel(0): DPI set to (96, 96)
[ 368.358] (II) Loading sub module "dri3"
[ 368.358] (II) LoadModule: "dri3"
[ 368.358] (II) Module "dri3" already built-in
[ 368.358] (II) Loading sub module "dri2"
[ 368.358] (II) LoadModule: "dri2"
[ 368.358] (II) Module "dri2" already built-in
[ 368.358] (II) Loading sub module "present"
[ 368.358] (II) LoadModule: "present"
[ 368.358] (II) Module "present" already built-in
[ 368.358] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 368.358] (==) intel(0): Backing store enabled
[ 368.358] (==) intel(0): Silken mouse disabled
[ 368.358] (II) intel(0): HW Cursor enabled
[ 368.358] (==) intel(0): DPMS enabled
[ 368.359] (==) intel(0): Display hotplug detection enabled
[ 368.359] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 368.359] (II) intel(0): [DRI2] Setup complete
[ 368.359] (II) intel(0): [DRI2] DRI driver: i915
[ 368.359] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 368.359] (II) intel(0): direct rendering: DRI2 enabled
[ 368.359] (II) intel(0): hardware support for Present enabled
[ 368.359] (II) Initializing extension Generic Event Extension
[ 368.359] (II) Initializing extension SHAPE
[ 368.359] (II) Initializing extension MIT-SHM
[ 368.359] (II) Initializing extension XInputExtension
[ 368.360] (II) Initializing extension XTEST
[ 368.360] (II) Initializing extension BIG-REQUESTS
[ 368.360] (II) Initializing extension SYNC
[ 368.360] (II) Initializing extension XKEYBOARD
[ 368.360] (II) Initializing extension XC-MISC
[ 368.361] (II) Initializing extension SECURITY
[ 368.361] (II) Initializing extension XFIXES
[ 368.361] (II) Initializing extension RENDER
[ 368.361] (II) Initializing extension RANDR
[ 368.362] (II) Initializing extension COMPOSITE
[ 368.362] (II) Initializing extension DAMAGE
[ 368.362] (II) Initializing extension MIT-SCREEN-SAVER
[ 368.362] (II) Initializing extension DOUBLE-BUFFER
[ 368.362] (II) Initializing extension RECORD
[ 368.363] (II) Initializing extension DPMS
[ 368.363] (II) Initializing extension Present
[ 368.363] (II) Initializing extension DRI3
[ 368.363] (II) Initializing extension X-Resource
[ 368.363] (II) Initializing extension XVideo
[ 368.363] (II) Initializing extension XVideo-MotionCompensation
[ 368.364] (II) Initializing extension GLX
[ 368.372] (II) AIGLX: Loaded and initialized i915
[ 368.372] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 368.372] (II) Initializing extension XFree86-VidModeExtension
[ 368.372] (II) Initializing extension XFree86-DGA
[ 368.372] (II) Initializing extension XFree86-DRI
[ 368.372] (II) Initializing extension DRI2
[ 368.381] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 368.383] (II) intel(0): switch to mode 1920x1080@60.0 on DVI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 368.400] (II) intel(0): Setting screen physical size to 508 x 285
[ 368.471] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 368.471] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 368.471] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 368.471] (**) Power Button: Applying InputClass "system-keyboard"
[ 368.471] (II) LoadModule: "libinput"
[ 368.471] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 368.473] (II) Module libinput: vendor="X.Org Foundation"
[ 368.473] compiled for 1.20.11, module version = 1.1.0
[ 368.473] Module class: X.Org XInput Driver
[ 368.473] ABI class: X.Org XInput driver, version 24.1
[ 368.473] (II) Using input driver 'libinput' for 'Power Button'
[ 368.473] (**) Power Button: always reports core events
[ 368.473] (**) Option "Device" "/dev/input/event1"
[ 368.473] (**) Option "_source" "server/udev"
[ 368.476] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 368.476] (II) event1 - Power Button: device is a keyboard
[ 368.476] (II) event1 - Power Button: device removed
[ 368.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 368.513] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 368.513] (**) Option "xkb_layout" "de"
[ 368.559] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 368.560] (II) event1 - Power Button: device is a keyboard
[ 368.560] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 368.560] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 368.560] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 368.560] (**) Power Button: Applying InputClass "system-keyboard"
[ 368.560] (II) Using input driver 'libinput' for 'Power Button'
[ 368.560] (**) Power Button: always reports core events
[ 368.560] (**) Option "Device" "/dev/input/event0"
[ 368.561] (**) Option "_source" "server/udev"
[ 368.562] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 368.562] (II) event0 - Power Button: device is a keyboard
[ 368.562] (II) event0 - Power Button: device removed
[ 368.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 368.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 368.583] (**) Option "xkb_layout" "de"
[ 368.585] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 368.585] (II) event0 - Power Button: device is a keyboard
[ 368.587] (II) config/udev: Adding input device C-Media USB Headphone Set (/dev/input/event2)
[ 368.588] (**) C-Media USB Headphone Set : Applying InputClass "evdev keyboard catchall"
[ 368.588] (**) C-Media USB Headphone Set : Applying InputClass "libinput keyboard catchall"
[ 368.588] (**) C-Media USB Headphone Set : Applying InputClass "system-keyboard"
[ 368.588] (II) Using input driver 'libinput' for 'C-Media USB Headphone Set '
[ 368.588] (**) C-Media USB Headphone Set : always reports core events
[ 368.588] (**) Option "Device" "/dev/input/event2"
[ 368.588] (**) Option "_source" "server/udev"
[ 368.590] (II) event2 - C-Media USB Headphone Set : is tagged by udev as: Keyboard
[ 368.591] (II) event2 - C-Media USB Headphone Set : device is a keyboard
[ 368.591] (II) event2 - C-Media USB Headphone Set : device removed
[ 368.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.3/0003:0D8C:000C.0001/input/input4/event2"
[ 368.656] (II) XINPUT: Adding extended input device "C-Media USB Headphone Set " (type: KEYBOARD, id 8)
[ 368.656] (**) Option "xkb_layout" "de"
[ 368.660] (II) event2 - C-Media USB Headphone Set : is tagged by udev as: Keyboard
[ 368.660] (II) event2 - C-Media USB Headphone Set : device is a keyboard
[ 368.661] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 368.661] (II) No input driver specified, ignoring this device.
[ 368.661] (II) This device may have been added with another device file.
[ 368.662] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 368.662] (II) No input driver specified, ignoring this device.
[ 368.662] (II) This device may have been added with another device file.
[ 368.663] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event10)
[ 368.663] (II) No input driver specified, ignoring this device.
[ 368.663] (II) This device may have been added with another device file.
[ 368.664] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event11)
[ 368.664] (II) No input driver specified, ignoring this device.
[ 368.664] (II) This device may have been added with another device file.
[ 368.666] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event6)
[ 368.666] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 368.666] (**) Logitech Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[ 368.666] (II) Using input driver 'libinput' for 'Logitech Optical USB Mouse'
[ 368.666] (**) Logitech Optical USB Mouse: always reports core events
[ 368.666] (**) Option "Device" "/dev/input/event6"
[ 368.666] (**) Option "_source" "server/udev"
[ 368.726] (II) event6 - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[ 368.726] (II) event6 - Logitech Optical USB Mouse: device set to 400 DPI
[ 368.726] (II) event6 - Logitech Optical USB Mouse: device is a pointer
[ 368.727] (II) event6 - Logitech Optical USB Mouse: device removed
[ 368.826] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:046D:C016.0004/input/input8/event6"
[ 368.826] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
[ 368.827] (**) Option "AccelerationScheme" "none"
[ 368.827] (**) Logitech Optical USB Mouse: (accel) selected scheme none/0
[ 368.827] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 368.827] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 368.886] (II) event6 - Logitech Optical USB Mouse: is tagged by udev as: Mouse
[ 368.886] (II) event6 - Logitech Optical USB Mouse: device set to 400 DPI
[ 368.886] (II) event6 - Logitech Optical USB Mouse: device is a pointer
[ 368.888] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 368.888] (II) No input driver specified, ignoring this device.
[ 368.888] (II) This device may have been added with another device file.
[ 368.889] (II) config/udev: Adding input device SEM HCT Keyboard (/dev/input/event3)
[ 368.889] (**) SEM HCT Keyboard: Applying InputClass "evdev keyboard catchall"
[ 368.889] (**) SEM HCT Keyboard: Applying InputClass "libinput keyboard catchall"
[ 368.889] (**) SEM HCT Keyboard: Applying InputClass "system-keyboard"
[ 368.889] (II) Using input driver 'libinput' for 'SEM HCT Keyboard'
[ 368.889] (**) SEM HCT Keyboard: always reports core events
[ 368.889] (**) Option "Device" "/dev/input/event3"
[ 368.889] (**) Option "_source" "server/udev"
[ 368.891] (II) event3 - SEM HCT Keyboard: is tagged by udev as: Keyboard
[ 368.891] (II) event3 - SEM HCT Keyboard: device is a keyboard
[ 368.891] (II) event3 - SEM HCT Keyboard: device removed
[ 368.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.0/0003:1C4F:0002.0002/input/input5/event3"
[ 368.913] (II) XINPUT: Adding extended input device "SEM HCT Keyboard" (type: KEYBOARD, id 10)
[ 368.913] (**) Option "xkb_layout" "de"
[ 368.919] (II) event3 - SEM HCT Keyboard: is tagged by udev as: Keyboard
[ 368.919] (II) event3 - SEM HCT Keyboard: device is a keyboard
[ 368.921] (II) config/udev: Adding input device SEM HCT Keyboard Consumer Control (/dev/input/event4)
[ 368.922] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 368.922] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 368.922] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 368.922] (II) Using input driver 'libinput' for 'SEM HCT Keyboard Consumer Control'
[ 368.922] (**) SEM HCT Keyboard Consumer Control: always reports core events
[ 368.922] (**) Option "Device" "/dev/input/event4"
[ 368.922] (**) Option "_source" "server/udev"
[ 368.926] (II) event4 - SEM HCT Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 368.926] (II) event4 - SEM HCT Keyboard Consumer Control: device is a keyboard
[ 368.927] (II) event4 - SEM HCT Keyboard Consumer Control: device removed
[ 368.936] (II) libinput: SEM HCT Keyboard Consumer Control: needs a virtual subdevice
[ 368.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.1/0003:1C4F:0002.0003/input/input6/event4"
[ 368.937] (II) XINPUT: Adding extended input device "SEM HCT Keyboard Consumer Control" (type: MOUSE, id 11)
[ 368.937] (**) Option "AccelerationScheme" "none"
[ 368.937] (**) SEM HCT Keyboard Consumer Control: (accel) selected scheme none/0
[ 368.937] (**) SEM HCT Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 368.937] (**) SEM HCT Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 368.940] (II) event4 - SEM HCT Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 368.941] (II) event4 - SEM HCT Keyboard Consumer Control: device is a keyboard
[ 368.944] (II) config/udev: Adding input device SEM HCT Keyboard System Control (/dev/input/event5)
[ 368.944] (**) SEM HCT Keyboard System Control: Applying InputClass "evdev keyboard catchall"
[ 368.944] (**) SEM HCT Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 368.944] (**) SEM HCT Keyboard System Control: Applying InputClass "system-keyboard"
[ 368.944] (II) Using input driver 'libinput' for 'SEM HCT Keyboard System Control'
[ 368.944] (**) SEM HCT Keyboard System Control: always reports core events
[ 368.944] (**) Option "Device" "/dev/input/event5"
[ 368.944] (**) Option "_source" "server/udev"
[ 368.947] (II) event5 - SEM HCT Keyboard System Control: is tagged by udev as: Keyboard
[ 368.947] (II) event5 - SEM HCT Keyboard System Control: device is a keyboard
[ 368.948] (II) event5 - SEM HCT Keyboard System Control: device removed
[ 368.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.1/0003:1C4F:0002.0003/input/input7/event5"
[ 368.970] (II) XINPUT: Adding extended input device "SEM HCT Keyboard System Control" (type: KEYBOARD, id 12)
[ 368.970] (**) Option "xkb_layout" "de"
[ 368.972] (II) event5 - SEM HCT Keyboard System Control: is tagged by udev as: Keyboard
[ 368.972] (II) event5 - SEM HCT Keyboard System Control: device is a keyboard
[ 368.973] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 368.973] (II) No input driver specified, ignoring this device.
[ 368.973] (II) This device may have been added with another device file.
[ 369.015] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 369.016] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 369.016] (**) SEM HCT Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 369.016] (II) Using input driver 'libinput' for 'SEM HCT Keyboard Consumer Control'
[ 369.016] (**) SEM HCT Keyboard Consumer Control: always reports core events
[ 369.016] (**) Option "Device" "/dev/input/event4"
[ 369.016] (**) Option "_source" "_driver/libinput"
[ 369.016] (II) libinput: SEM HCT Keyboard Consumer Control: is a virtual subdevice
[ 369.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.1/0003:1C4F:0002.0003/input/input6/event4"
[ 369.016] (II) XINPUT: Adding extended input device "SEM HCT Keyboard Consumer Control" (type: KEYBOARD, id 13)
[ 369.016] (**) Option "xkb_layout" "de"
[ 370.427] (II) intel(0): EDID vendor "BNQ", prod id 30885
[ 370.427] (II) intel(0): Using EDID range info for horizontal sync
[ 370.427] (II) intel(0): Using EDID range info for vertical refresh
[ 370.427] (II) intel(0): Printing DDC gathered Modelines:
[ 370.427] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 370.427] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 370.427] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 370.427] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 370.427] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 370.427] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 370.427] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 370.427] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 370.427] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 370.427] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 370.427] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 370.427] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 370.427] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 370.427] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 370.428] (II) intel(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 370.428] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 3632.968] (EE) client bug: timer event6 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[ 3648.847] (EE) event6 - Logitech Optical USB Mouse: client bug: event processing lagging behind by 15ms, your system is too slowOffline
#29 2021-07-25 11:56:55
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
You're running that one on the xf86-video-intel driver, so the only way you end up w/ llvmpipe there is exporting LIBGL_ALWAYS_SOFTWARE (check "printenv" on the manjaro system)
An obvious difference is that the output (monitor) on the arch system possibly runs at much higher pixelclocks than the manjaro system (see the DDC gathered Modelines and post the outputs of "xrandr -q" on either system)
I'd still suggest to also explore activating the GL2.1 support via drirc (to free CPU capacity, with that GPU, you probably won't have much CPU to spare either…)
Offline
#30 2021-07-25 20:00:32
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Yes, I've already been starting Plasma from console with the following ~/.xinirc:
export DESKTOP_SESSION=plasma
export LIBGL_ALWAYS_SOFTWARE=true
exec startplasma-x11The current screen resolutions of both screens are each 1920x1080, and "xrandr -q" for the Manjaro one is "60.00*+", for the Arch one "60.00*+ 59.94".
Then you're referring to OpenGL 2.1 with i915 driver, right? – I created an /etc/drirc like provided, tried both "DRI" "2" and "3", and both "OpenGL 3.1" and "2.0" in Plasma's settings "Displays and monitors | Compositor | Module", then re-applied or restarted X (or should I reboot?). Well, the glxgears frames are a bit faster now, at monitor frame rate or above. – Configuring this all seems not to hurt, but there is no performance boost and does not come up to the Manjaro box graphical output.
Yet there's no desktop effect like background blur, though it's enabled both in system settings and konsole.
Further, for testing usually I also run other glx stuff, like from rss-glx (screensavers or stand-alone apps), which always fails with a "GLXBadContextTag – Major opcode of failed request: 152 (GLX)", tough the Xorg.0.log says "AIGLX: Loaded and initialized i915", and I added a
Section "Module"
Load "glx"
EndSectionto my 20-intel.conf. – Is this useful at all?
Tomorrow I can see if something changes to the better if I extend Arch's RAM from 6 to 8 GB. Or should I use another compositor?
Last edited by cameo (2021-07-26 13:39:36)
Offline
#31 2021-07-26 06:47:02
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Altering the mesa capacities of i915 will not have any impact if "LIBGL_ALWAYS_SOFTWARE" is "true".
The relevant question is its impact on glxinfo.
"GLXBadContextTag" does not mean that glx isn't loaded, but that the wrong (and invalid) GL context (think "opengl window") was being selected.
This could be for a bad opengl configuration, so glxinfo is always the most relevant item.
Notice that this could also just be a screensaver that doesn't sufficiently test the GL capacities and creates an invalid context by requesting unavailable features and then ignores that the context creation failed. (Ie. sloppy code - which is not uncommon, your GPU is dead old. This will not be an issue w/ the software rasterizer)
Tomorrow I can see if something changes to the better if I extend Arch's RAM from 6 to 8 GB. Or should I use another compositor?
The performance of the software rasterizer comes (for an equal software stack) down to the CPU performance. Faster (clocking) CPU means faster GL performance.
RAM is hardly an issue w/ glxgears, because it doesn't use any textures.
glxgears frames are a bit faster now, at monitor frame rate or above
glxgears is by default limited to the vblank interval, https://wiki.archlinux.org/title/Intel_ … on_(VSYNC)
Yet there's no desktop effect like background blur
W/ i915/GL2.1, LIBGL_ALWAYS_SOFTWARE=true or both?
Iirc kwin detects the software rasterizer and might or not disable features.
You might also simply be using a limited render path (xrender or opengl 2.1) where kwin won't provide those effects.
I could assume that its blur shader will require at least GL3.0 (implying that you *MUST* use the software rasterizer since your IGP will never be able to fulfill that requirement - no matter how long intel keeps searching for more hidden features in that chip 
)
Offline
#32 2021-07-26 16:32:34
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
seth wrote:
I could assume that its blur shader will require at least GL3.0 (implying that you *MUST* use the software rasterizer since your IGP will never be able to fulfill that requirement - no matter how long intel keeps searching for more hidden features in that chip
Well, on the manjaro box, blurring works either with "OpenGL 2.0" and "OpenGL 3.1" (and of course not with "XRender") selection in "Compositor"; persistent after reboot. And it also echoes $LIBGL_ALWAYS_SOFTWARE as true.
Offline
#33 2021-07-26 20:15:18
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
seth wrote:
Yet there's no desktop effect like background blur
W/ i915/GL2.1, LIBGL_ALWAYS_SOFTWARE=true or both?
Offline
#34 2021-07-26 20:51:22
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
seth wrote:
seth wrote:Yet there's no desktop effect like background blur
W/ i915/GL2.1, LIBGL_ALWAYS_SOFTWARE=true or both?
I don't get you exactly~
Do you mean GL2.0 oder 3.1, and where?
No matter, which OpenGL version I choose on Arch, the blur effect does not show up.
The Arch box again:
$ glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Mesa/X.org (0xffffffff)
Device: llvmpipe (LLVM 12.0.1, 128 bits) (0xffffffff)
Version: 21.1.5
Accelerated: no
Video memory: 5928MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.5
Max compat profile version: 3.1
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 12.0.1, 128 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 21.1.5
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 3.1 Mesa 21.1.5
OpenGL shading language version string: 1.40
OpenGL context flags: (none)
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 21.1.5
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20And "true or both"?? Both machines have got i195 loaded, and "LIBGL_ALWAYS_SOFTWARE=true".
And the Manjaro box, just for completion:
$ glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Mesa/X.org (0xffffffff)
Device: llvmpipe (LLVM 12.0.1, 128 bits) (0xffffffff)
Version: 21.1.5
Accelerated: no
Video memory: 7945MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.5
Max compat profile version: 3.1
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 12.0.1, 128 bits)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 21.1.5
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 3.1 Mesa 21.1.5
OpenGL shading language version string: 1.40
OpenGL context flags: (none)
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 21.1.5
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20Offline
#35 2021-07-27 05:41:40
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
and "LIBGL_ALWAYS_SOFTWARE=true"
That's the relevant bit.
OpenGL config is the same on both systems, so the difference is in KDE.
qdbus org.kde.KWin /KWin supportInformationOffline
#36 2021-07-27 16:34:42
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Good idea, as I am new to KDE. – Here you are:
Arch box:
KWin-Unterstützungsinformationen:
Benutzen Sie die folgenden Informationen, wenn Sie nach Unterstützung fragen, z. B. auf https://forum.kde.org.
Sie enthalten Informationen über die momentan laufende Instanz, welche Optionen verwendet werden,
welcher OpenGL-Treiber verwendet wird und welche Effekte laufen.
Bitte geben Sie die unten stehenden Informationen bei einem Pastebin-Dienst wie https://paste.kde.org ein, anstatt sie direkt in die Hilfediskussionen zu schreiben.
==========================
Version
=======
KWin version: 5.22.4
Qt Version: 5.15.2
Qt compile version: 5.15.2
XCB compile version: 1.14
Operation Mode: X11 only
Build Options
=============
KWIN_BUILD_DECORATIONS: yes
KWIN_BUILD_TABBOX: yes
KWIN_BUILD_ACTIVITIES: yes
HAVE_DRM: yes
HAVE_GBM: yes
HAVE_EGL_STREAMS: yes
HAVE_X11_XCB: yes
HAVE_EPOXY_GLX: yes
HAVE_WAYLAND_EGL: yes
X11
===
Vendor: The X.Org Foundation
Vendor Release: 12012000
Protocol Version/Revision: 11/0
SHAPE: yes; Version: 0x11
RANDR: yes; Version: 0x14
DAMAGE: yes; Version: 0x11
Composite: yes; Version: 0x4
RENDER: yes; Version: 0xb
XFIXES: yes; Version: 0x50
SYNC: yes; Version: 0x31
GLX: yes; Version: 0x0
Decoration
==========
Plugin: org.kde.breeze
Theme:
Plugin recommends border size: None
Blur: 0
onAllDesktopsAvailable: true
alphaChannelSupported: true
closeOnDoubleClickOnMenu: false
decorationButtonsLeft: 0, 2
decorationButtonsRight: 6, 3, 4, 5
borderSize: 2
gridUnit: 10
font: Noto Sans,10,-1,0,50,0,0,0,0,0
smallSpacing: 2
largeSpacing: 10
Platform
==========
Name: KWin::X11StandalonePlatform
Cursor
======
themeName: breeze_cursors
themeSize: 24
Options
=======
focusPolicy: 0
xwaylandCrashPolicy:
xwaylandMaxCrashCount: 3
nextFocusPrefersMouse: true
clickRaise: true
autoRaise: false
autoRaiseInterval: 0
delayFocusInterval: 0
shadeHover: false
shadeHoverInterval: 250
separateScreenFocus: false
placement: 4
focusPolicyIsReasonable: true
borderSnapZone: 10
windowSnapZone: 10
centerSnapZone: 0
snapOnlyWhenOverlapping: false
rollOverDesktops: true
focusStealingPreventionLevel: 1
operationTitlebarDblClick: 5000
operationMaxButtonLeftClick: 5000
operationMaxButtonMiddleClick: 5015
operationMaxButtonRightClick: 5014
commandActiveTitlebar1: 0
commandActiveTitlebar2: 28
commandActiveTitlebar3: 2
commandInactiveTitlebar1: 4
commandInactiveTitlebar2: 28
commandInactiveTitlebar3: 2
commandWindow1: 7
commandWindow2: 8
commandWindow3: 8
commandWindowWheel: 28
commandAll1: 10
commandAll2: 3
commandAll3: 14
keyCmdAllModKey: 16777250
showGeometryTip: false
condensedTitle: false
electricBorderMaximize: true
electricBorderTiling: true
electricBorderCornerRatio: 0.25
borderlessMaximizedWindows: false
killPingTimeout: 5000
hideUtilityWindowsForInactive: true
compositingMode: 1
useCompositing: true
hiddenPreviews: 1
glSmoothScale: 2
xrenderSmoothScale: false
glStrictBinding: true
glStrictBindingFollowsDriver: true
glCoreProfile: false
glPreferBufferSwap: 101
glPlatformInterface: 1
windowsBlockCompositing: true
latencyPolicy:
renderTimeEstimator:
Screen Edges
============
desktopSwitching: false
desktopSwitchingMovingClients: false
cursorPushBackDistance: 1x1
timeThreshold: 150
reActivateThreshold: 350
actionTopLeft: 0
actionTop: 0
actionTopRight: 0
actionRight: 0
actionBottomRight: 0
actionBottom: 0
actionBottomLeft: 0
actionLeft: 0
Screens
=======
Multi-Head: no
Active screen follows mouse: yes
Number of Screens: 1
Screen 0:
---------
Name: DVI1
Geometry: 0,0,1080x1920
Scale: 1
Refresh Rate: 60
Compositing
===========
Compositing is active
Compositing Type: OpenGL
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 12.0.1, 128 bits)
OpenGL version string: 3.1 Mesa 21.1.5
OpenGL platform interface: GLX
OpenGL shading language version string: 1.40
Driver: LLVMpipe
GPU class: Unknown
OpenGL version: 3.1
GLSL version: 1.40
Mesa version: 21.1.5
X server version: 1.20.12
Linux kernel version: 5.13.5
Direct rendering: Requires strict binding: yes
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
OpenGL 2 Shaders are used
Loaded Effects:
---------------
zoom
screenshot
desktopgrid
colorpicker
presentwindows
highlightwindow
startupfeedback
screenedge
kscreen
Currently Active Effects:
-------------------------
Effect Settings:
----------------
zoom:
zoomFactor: 1.2
mousePointer: 0
mouseTracking: 0
focusTrackingEnabled: false
textCaretTrackingEnabled: false
focusDelay: 350
moveFactor: 20
targetZoom: 1
screenshot:
desktopgrid:
zoomDuration: 300
border: 10
desktopNameAlignment: 0
layoutMode: 0
customLayoutRows: 2
usePresentWindows: true
colorpicker:
presentwindows:
layoutMode: 0
showCaptions: true
showIcons: true
doNotCloseWindows: false
ignoreMinimized: false
accuracy: 20
fillGaps: true
fadeDuration: 150
showPanel: true
leftButtonWindow: 1
rightButtonWindow: 2
middleButtonWindow: 0
leftButtonDesktop: 2
middleButtonDesktop: 0
rightButtonDesktop: 0
highlightwindow:
startupfeedback:
type: 1
screenedge:
kscreen:
Loaded Plugins:
---------------
kwin5_plugin_krunner
kwin5_plugin_nightcolor
Available Plugins:
------------------
kwin5_plugin_colord
kwin5_plugin_krunner
kwin5_plugin_nightcolorManjaro box:
KWin-Unterstützungsinformationen:
Benutzen Sie die folgenden Informationen, wenn Sie nach Unterstützung fragen, z. B. auf https://forum.kde.org.
Sie enthalten Informationen über die momentan laufende Instanz, welche Optionen verwendet werden,
welcher OpenGL-Treiber verwendet wird und welche Effekte laufen.
Bitte geben Sie die unten stehenden Informationen bei einem Pastebin-Dienst wie https://paste.kde.org ein, anstatt sie direkt in die Hilfediskussionen zu schreiben.
==========================
Version
=======
KWin version: 5.22.3
Qt Version: 5.15.2
Qt compile version: 5.15.2
XCB compile version: 1.14
Operation Mode: X11 only
Build Options
=============
KWIN_BUILD_DECORATIONS: yes
KWIN_BUILD_TABBOX: yes
KWIN_BUILD_ACTIVITIES: yes
HAVE_DRM: yes
HAVE_GBM: yes
HAVE_EGL_STREAMS: yes
HAVE_X11_XCB: yes
HAVE_EPOXY_GLX: yes
HAVE_WAYLAND_EGL: yes
X11
===
Vendor: The X.Org Foundation
Vendor Release: 12011000
Protocol Version/Revision: 11/0
SHAPE: yes; Version: 0x11
RANDR: yes; Version: 0x14
DAMAGE: yes; Version: 0x11
Composite: yes; Version: 0x4
RENDER: yes; Version: 0xb
XFIXES: yes; Version: 0x50
SYNC: yes; Version: 0x31
GLX: yes; Version: 0x0
Decoration
==========
Plugin: org.kde.breeze
Theme:
Plugin recommends border size: None
Blur: 0
onAllDesktopsAvailable: true
alphaChannelSupported: true
closeOnDoubleClickOnMenu: false
decorationButtonsLeft: 0, 2
decorationButtonsRight: 6, 3, 4, 5
borderSize: 0
gridUnit: 10
font: Cantarell,10,-1,5,50,0,0,0,0,0
smallSpacing: 2
largeSpacing: 10
Platform
==========
Name: KWin::X11StandalonePlatform
Cursor
======
themeName: breeze_cursors
themeSize: 24
Options
=======
focusPolicy: 0
xwaylandCrashPolicy:
xwaylandMaxCrashCount: 3
nextFocusPrefersMouse: false
clickRaise: true
autoRaise: false
autoRaiseInterval: 0
delayFocusInterval: 0
shadeHover: false
shadeHoverInterval: 250
separateScreenFocus: false
placement: 4
focusPolicyIsReasonable: true
borderSnapZone: 10
windowSnapZone: 10
centerSnapZone: 0
snapOnlyWhenOverlapping: false
rollOverDesktops: true
focusStealingPreventionLevel: 1
operationTitlebarDblClick: 5000
operationMaxButtonLeftClick: 5000
operationMaxButtonMiddleClick: 5015
operationMaxButtonRightClick: 5014
commandActiveTitlebar1: 0
commandActiveTitlebar2: 28
commandActiveTitlebar3: 2
commandInactiveTitlebar1: 4
commandInactiveTitlebar2: 28
commandInactiveTitlebar3: 2
commandWindow1: 7
commandWindow2: 8
commandWindow3: 8
commandWindowWheel: 28
commandAll1: 10
commandAll2: 3
commandAll3: 14
keyCmdAllModKey: 16777250
showGeometryTip: false
condensedTitle: false
electricBorderMaximize: true
electricBorderTiling: true
electricBorderCornerRatio: 0.25
borderlessMaximizedWindows: false
killPingTimeout: 5000
hideUtilityWindowsForInactive: true
compositingMode: 1
useCompositing: true
hiddenPreviews: 1
glSmoothScale: 2
xrenderSmoothScale: false
glStrictBinding: true
glStrictBindingFollowsDriver: true
glCoreProfile: false
glPreferBufferSwap: 101
glPlatformInterface: 1
windowsBlockCompositing: true
latencyPolicy:
renderTimeEstimator:
Screen Edges
============
desktopSwitching: false
desktopSwitchingMovingClients: false
cursorPushBackDistance: 1x1
timeThreshold: 150
reActivateThreshold: 350
actionTopLeft: 0
actionTop: 0
actionTopRight: 0
actionRight: 0
actionBottomRight: 0
actionBottom: 0
actionBottomLeft: 0
actionLeft: 0
Screens
=======
Multi-Head: no
Active screen follows mouse: yes
Number of Screens: 2
Screen 0:
---------
Name: DVI1
Geometry: 0,0,1920x1080
Scale: 1
Refresh Rate: 60
Screen 1:
---------
Name: VGA1
Geometry: 1920,0,1920x1080
Scale: 1
Refresh Rate: 60
Compositing
===========
Compositing is active
Compositing Type: OpenGL
OpenGL vendor string: Mesa/X.org
OpenGL renderer string: llvmpipe (LLVM 12.0.1, 128 bits)
OpenGL version string: 3.1 Mesa 21.1.5
OpenGL platform interface: GLX
OpenGL shading language version string: 1.40
Driver: LLVMpipe
GPU class: Unknown
OpenGL version: 3.1
GLSL version: 1.40
Mesa version: 21.1.5
X server version: 1.20.11
Linux kernel version: 5.10.52
Direct rendering: Requires strict binding: yes
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
OpenGL 2 Shaders are used
Loaded Effects:
---------------
zoom
screenshot
desktopgrid
colorpicker
presentwindows
highlightwindow
blur
contrast
startupfeedback
screenedge
kscreen
Currently Active Effects:
-------------------------
blur
contrast
Effect Settings:
----------------
zoom:
zoomFactor: 1.2
mousePointer: 0
mouseTracking: 0
focusTrackingEnabled: false
textCaretTrackingEnabled: false
focusDelay: 350
moveFactor: 20
targetZoom: 1
screenshot:
desktopgrid:
zoomDuration: 300
border: 10
desktopNameAlignment: 0
layoutMode: 0
customLayoutRows: 2
usePresentWindows: true
colorpicker:
presentwindows:
layoutMode: 0
showCaptions: true
showIcons: true
doNotCloseWindows: false
ignoreMinimized: false
accuracy: 20
fillGaps: true
fadeDuration: 150
showPanel: true
leftButtonWindow: 1
rightButtonWindow: 2
middleButtonWindow: 0
leftButtonDesktop: 2
middleButtonDesktop: 0
rightButtonDesktop: 0
highlightwindow:
blur:
contrast:
startupfeedback:
type: 1
screenedge:
kscreen:
Loaded Plugins:
---------------
kwin5_plugin_krunner
kwin5_plugin_nightcolor
Available Plugins:
------------------
kwin5_plugin_colord
kwin5_plugin_krunner
kwin5_plugin_nightcolorAnd obviously in Arch, there's an item "blur" in Decorations, but it's not loaded (though I selected and applied it).
Sure there are another couple of differences, and hopefully you can figure out what's relevant here.
Offline
#37 2021-07-27 20:11:24
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
there's an item "blur" in Decorations
?
kcmshell5 kwineffectsThere's a blur effect? Is it enabled? Can you enable it? If not, do you get an error message?
The output on arch is rotated - the transformation will eat some performance (how much I can't say - depends on your CPU)
Offline
#38 2021-07-27 20:51:23
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
seth wrote:
there's an item "blur" in Decorations
?
I rather mean in both qdbus logs there's an entry
Decoration
==========
...
Blur: 0
...And though it's always "0", it blurs on Manjaro.
(Probably this value just refers to display "0".)
seth wrote:
kcmshell5 kwineffects
On both Arch and Manjaro boxes there's no such module.
seth wrote:
The output on arch is rotated - the transformation will eat some performance (how much I can't say - depends on your CPU)
Yes, it is, due to the lack of space on my desk; yet i can't imagine that would 'disable' blurring.
Edit: kcmshell5 is nice! But when I enter "kcmshell5 opengl" there's 'only' a clickable dialogue window where I can click stuff; is there a way having a text output?
And does it know commands for forcing settings? I just did some fruitless queries, probably due to wrong feeds~
Last edited by cameo (2021-07-27 21:47:28)
Offline
#39 2021-07-27 21:09:02
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
And though it's always "0", it blurs on Manjaro.
That setting is irrelevant.
there's no such module
Looks like some genius added a useless underscore to break all 3rd party stuff for no reason… It's the effects tab of the window manager settings, try
kcmshell5 kwin_effectsyet i can't imagine that would 'disable' blurring.
No, but impact performance. What disables blurring is that the blur effect isn't enabled…
Offline
#40 2021-07-27 21:37:46
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
seth wrote:
kcmshell5 kwin_effects
file:///usr/lib/qt/qml/org/kde/kirigami.2/templates/OverlaySheet.qml:203:38: QML FocusScope: Binding loop detected for property "contentItemMaximumWidth"
QCoreApplication::postEvent: Unexpected null receiver
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:94: TypeError: Cannot read property 'position' of null
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:93: TypeError: Cannot read property 'background' of null
file:///usr/lib/qt/qml/org/kde/newstuff/qml/Page.qml:145: TypeError: Cannot read property 'useLabel' of null
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:94: TypeError: Cannot read property 'position' of null
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:93: TypeError: Cannot read property 'background' of null
file:///usr/lib/qt/qml/org/kde/newstuff/qml/Page.qml:145: TypeError: Cannot read property 'useLabel' of null
file:///usr/share/kpackage/kcms/kcm_kwin_effects/contents/ui/main.qml:22:13: QML ColumnLayout: Cannot anchor to an item that isn't a parent or sibling.
file:///usr/share/kpackage/kcms/kcm_kwin_effects/contents/ui/main.qml:56:17: QML MenuItem: Binding loop detected for property "implicitWidth"
file:///usr/share/kpackage/kcms/kcm_kwin_effects/contents/ui/main.qml:64:17: QML MenuItem: Binding loop detected for property "implicitWidth"
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:94: TypeError: Cannot read property 'position' of null
file:///usr/lib/qt/qml/org/kde/kirigami.2/AbstractApplicationItem.qml:93: TypeError: Cannot read property 'background' of null
file:///usr/lib/qt/qml/org/kde/newstuff/qml/Page.qml:145: TypeError: Cannot read property 'useLabel' of null
file:///usr/share/kpackage/kcms/kcm_kwin_effects/contents/ui/main.qml:22:13: QML ColumnLayout: Cannot anchor to an item that isn't a parent or sibling.It's the same log on both systems; looks like that it's not of much importance here. – In the dialog box, nothing changes when I enter "blur" or "Blur" (or "Verwischen" in German).
seth wrote:
cameo wrote:yet i can't imagine that would 'disable' blurring.
No, but impact performance. What disables blurring is that the blur effect isn't enabled…
Sure.
Offline
#41 2021-07-27 21:41:17
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
This dialog: https://www.dedoimedo.com/images/comput … teaser.png
Offline
#42 2021-07-27 21:59:51
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Yeah, that's the same dialog when coming from KDE System Settings, "Verhalten des Arbeitsbereichs/'workspace behavior' -> "Arbeitsflächen-Effekte"/'desktop effects' -> Section "Erscheinungsbild/'appearance', where "Verwischen"/'blur'ring is enabled.
Next, I just recognized version of "plasma-desktop" in up-to-date Manjaro is 5.22.3-1, while in Arch it's 5.22.4-1 (I'm not using "testing"). – Could there be a bug?
Offline
#43 2021-07-28 06:31:07
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
The relevant package is kwin.
Check the session journal on whether it complains failing to load the blur (and contrast) effect.
Offline
#44 2021-07-29 16:44:57
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
cameo wrote:
Could there be a bug?
(except me in front of the computer.)
seth wrote:
The relevant package is kwin.
Check the session journal on whether it complains failing to load the blur (and contrast) effect.
$ journalctl -xeb | grep kwin?
Offline
#45 2021-07-29 19:15:16
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Drop the "x" and the "e" - also "-i" to kwin and actually the journal pager/less is searchable (triggered by the "/" key)
Offline
#46 2021-07-29 20:22:39
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
$ journalctl -b | grep -i kwin
Jul 29 18:36:36 archbox dbus-daemon[1247]: [session uid=1000 pid=1247] Activating via systemd: service name='org.kde.kglobalaccel' unit='plasma-kglobalaccel.service' requested by ':1.9' (uid=1000 pid=1289 comm="/usr/bin/kwin_x11 "Last edited by cameo (2021-07-29 20:52:22)
Offline
#47 2021-07-29 20:33:26
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Well, "no".
Does ~/.config/kwinrc configure the blur effect?
Offline
#48 2021-07-29 20:58:23
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
Arch's ~/.config/kwinrc:
[$Version]
update_info=kwin.upd:replace-scalein-with-scale,kwin.upd:port-minimizeanimation-effect-to-js,kwin.upd:port-scale-effect-to-js,kwin.upd
[Desktops]
...
[Compositing]
OpenGLIsUnsafe=false
[Effect-Blur]
BlurStrength=14
NoiseStrength=10
[Effect-PresentWindows]
BorderActivateAll=9
[NightColor]
Active=true
[Plugins]
krohnkiteEnabled=true
minimizeallEnabled=true
synchronizeskipswitcherEnabled=false
videowallEnabled=false
[Script-krohnkite]
directionalKeyDwm=false
directionalKeyFocus=true
enableFloatingLayout=true
enableQuarterLayout=true
maximizeSoleTile=true
noTileBorder=true
screenGapBottom=6
screenGapLeft=6
screenGapRight=6
screenGapTop=6
tileLayoutGap=6
[TabBox]
BorderActivate=9
[Windows]
NextFocusPrefersMouse=true
[org.kde.kdecoration2]
BorderSize=Tiny
BorderSizeAuto=falseEdit: I just noticed, on Manjaro I've extra
[Plugins]
blurEnabled=true
contrastEnabled=truewhere the latter is probably not of importance here. However, I can't remember there was an extra install for these.
Last edited by cameo (2021-07-29 21:06:21)
Offline
#49 2021-07-29 21:12:18
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,457
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
There's not, they're just not enabled on the archbox. If the config GUI says sth. different, there's a bug in the config GUI.
Try to add them and restart kwin.
Offline
#50 2021-07-29 21:22:44
- cameo
- Member
- Registered: 2012-08-18
- Posts: 123
Re: [ ABANDONED ] Can't get KDE/Plasma OpenGL desktop effects run
That worked!!!
Offline