You are not logged in.
Hi all.
My PC is rather capable but since a few months I am having issues with X while using Chrome/Chromium/Vivaldi.
CPU: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
GPU: TigerLake-LP GT2 [Iris Xe Graphics] (rev 01)
RAM: 24GiB
Kernel: 5.14.14-zen1-1-zen (linux-zen@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 ZEN SMP PREEMPT Wed, 20 Oct 2021 21:35:17 +0000
DE: KDE Frameworks Version 5.87.0 / Qt Version 5.15.2 / Plasma 5.23.2-1
What I see is that under some circumstances (I am not 100% sure I can reproduce), anything using X for I/O gets lagging and stuttering.
For example, watching Youtube gives me sometimes lagging video but good quality audio.
Even typing into Konsole brings me back to the 9600 baud era, while downloading a file via wget or curl gives me full steam speed.
From dmesg I can grep this:
[ 0.792176] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 0.792277] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.794396] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.794915] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_08.bin (v2.8)
[ 0.930538] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_49.0.1.bin version 49.0 submission:disabled
[ 0.930540] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.5.0.bin version 7.5 authenticated:yes
[ 0.942584] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 0.973655] fbcon: i915 (fb0) is primary device
[ 1.015359] i915 0000:00:02.0: [drm] fb0: i915 frame buffer device
[ 2.578353] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.700836] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
It looks like the i915 driver is doing fine.
From /var/log/Xorg.0.log I get this:
[ 13105.530] (--) Log file renamed from "/var/log/Xorg.pid-19045.log" to "/var/log/Xorg.0.log"
[ 13105.530]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 13105.530] Build Operating System: Linux Archlinux
[ 13105.530] Current Operating System: Linux Feynman 5.14.14-zen1-1-zen #1 ZEN SMP PREEMPT Wed, 20 Oct 2021 21:35:17 +0000 x86_64
[ 13105.530] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=c3d87e5b-e300-429f-9d76-6c4c9c8d9b69 rw loglevel=3 quiet
[ 13105.530] Build Date: 31 October 2021 06:30:01AM
[ 13105.530]
[ 13105.530] Current version of pixman: 0.40.0
[ 13105.530] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13105.530] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13105.530] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 31 18:45:11 2021
[ 13105.530] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13105.530] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13105.530] (==) No Layout section. Using the first Screen section.
[ 13105.530] (==) No screen section available. Using defaults.
[ 13105.530] (**) |-->Screen "Default Screen Section" (0)
[ 13105.530] (**) | |-->Monitor "<default monitor>"
[ 13105.530] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 13105.530] (**) | |-->Device "Intel Graphics"
[ 13105.530] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13105.530] (==) Automatically adding devices
[ 13105.530] (==) Automatically enabling devices
[ 13105.530] (==) Automatically adding GPU devices
[ 13105.530] (==) Automatically binding GPU devices
[ 13105.530] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13105.530] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 13105.530] Entry deleted from font path.
[ 13105.530] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 13105.531] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 13105.531] Entry deleted from font path.
[ 13105.531] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 13105.531] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 13105.531] Entry deleted from font path.
[ 13105.531] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 13105.531] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 13105.531] Entry deleted from font path.
[ 13105.531] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 13105.531] Entry deleted from font path.
[ 13105.531] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 13105.531] Entry deleted from font path.
[ 13105.531] (==) FontPath set to:
[ 13105.531] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13105.531] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13105.531] (II) Module ABI versions:
[ 13105.531] X.Org ANSI C Emulation: 0.4
[ 13105.531] X.Org Video Driver: 24.1
[ 13105.531] X.Org XInput driver : 24.1
[ 13105.531] X.Org Server Extension : 10.0
[ 13105.531] (++) using VT number 1
[ 13105.531] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13105.532] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13105.533] (--) PCI:*(0@0:2:0) 8086:9a49:1558:14a1 rev 1, Mem @ 0x85000000/16777216, 0x70000000/134217728, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 13105.533] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13105.533] (II) LoadModule: "glx"
[ 13105.533] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13105.534] (II) Module glx: vendor="X.Org Foundation"
[ 13105.535] compiled for 1.20.13, module version = 1.0.0
[ 13105.535] ABI class: X.Org Server Extension, version 10.0
[ 13105.535] (II) LoadModule: "intel"
[ 13105.535] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13105.535] (II) Module intel: vendor="X.Org Foundation"
[ 13105.535] compiled for 1.20.10, module version = 2.99.917
[ 13105.535] Module class: X.Org Video Driver
[ 13105.535] ABI class: X.Org Video Driver, version 24.1
[ 13105.535] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13105.535] (II) intel: Driver for Intel(R) HD Graphics
[ 13105.535] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 13105.535] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 13105.535] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 13105.535] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[ 13105.547] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 13105.547] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 13105.547] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13105.547] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13105.547] (==) intel(0): RGB weight 888
[ 13105.547] (==) intel(0): Default visual is TrueColor
[ 13105.548] (II) intel(0): Output eDP1 has no monitor section
[ 13105.548] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13105.548] (II) intel(0): Enabled output eDP1
[ 13105.548] (II) intel(0): Output HDMI1 has no monitor section
[ 13105.548] (II) intel(0): Enabled output HDMI1
[ 13105.548] (II) intel(0): Output DP1 has no monitor section
[ 13105.548] (II) intel(0): Enabled output DP1
[ 13105.548] (II) intel(0): Output DP2 has no monitor section
[ 13105.548] (II) intel(0): Enabled output DP2
[ 13105.548] (II) intel(0): Output DP3 has no monitor section
[ 13105.548] (II) intel(0): Enabled output DP3
[ 13105.548] (II) intel(0): Output DP4 has no monitor section
[ 13105.548] (II) intel(0): Enabled output DP4
[ 13105.548] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13105.548] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13105.548] (II) intel(0): Enabled output VIRTUAL1
[ 13105.548] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 13105.548] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[ 13105.548] (==) intel(0): TearFree enabled
[ 13105.548] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13105.548] (==) intel(0): DPI set to (96, 96)
[ 13105.548] (II) Loading sub module "dri3"
[ 13105.548] (II) LoadModule: "dri3"
[ 13105.548] (II) Module "dri3" already built-in
[ 13105.548] (II) Loading sub module "dri2"
[ 13105.548] (II) LoadModule: "dri2"
[ 13105.548] (II) Module "dri2" already built-in
[ 13105.548] (II) Loading sub module "present"
[ 13105.548] (II) LoadModule: "present"
[ 13105.548] (II) Module "present" already built-in
[ 13105.548] (II) intel(0): SNA initialized with generic backend
[ 13105.548] (==) intel(0): Backing store enabled
[ 13105.548] (==) intel(0): Silken mouse disabled
[ 13105.548] (II) intel(0): HW Cursor enabled
[ 13105.549] (==) intel(0): DPMS enabled
[ 13105.549] (==) intel(0): Display hotplug detection enabled
[ 13105.549] (II) intel(0): Textured video not supported on this hardware or backend
[ 13105.549] (II) intel(0): [DRI2] Setup complete
[ 13105.549] (II) intel(0): [DRI2] DRI driver: i965
[ 13105.549] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 13105.549] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 13105.549] (II) intel(0): hardware support for Present enabled
[ 13105.549] (II) Initializing extension Generic Event Extension
[ 13105.549] (II) Initializing extension SHAPE
[ 13105.549] (II) Initializing extension MIT-SHM
[ 13105.549] (II) Initializing extension XInputExtension
[ 13105.549] (II) Initializing extension XTEST
[ 13105.549] (II) Initializing extension BIG-REQUESTS
[ 13105.549] (II) Initializing extension SYNC
[ 13105.550] (II) Initializing extension XKEYBOARD
[ 13105.550] (II) Initializing extension XC-MISC
[ 13105.550] (II) Initializing extension SECURITY
[ 13105.550] (II) Initializing extension XFIXES
[ 13105.550] (II) Initializing extension RENDER
[ 13105.550] (II) Initializing extension RANDR
[ 13105.550] (II) Initializing extension COMPOSITE
[ 13105.550] (II) Initializing extension DAMAGE
[ 13105.550] (II) Initializing extension MIT-SCREEN-SAVER
[ 13105.550] (II) Initializing extension DOUBLE-BUFFER
[ 13105.551] (II) Initializing extension RECORD
[ 13105.551] (II) Initializing extension DPMS
[ 13105.551] (II) Initializing extension Present
[ 13105.551] (II) Initializing extension DRI3
[ 13105.551] (II) Initializing extension X-Resource
[ 13105.551] (II) Initializing extension XVideo
[ 13105.551] (II) Initializing extension XVideo-MotionCompensation
[ 13105.551] (II) Initializing extension GLX
[ 13105.556] (EE) AIGLX error: Calling driver entry point failed
[ 13105.575] (II) IGLX: Loaded and initialized swrast
[ 13105.575] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 13105.575] (II) Initializing extension XFree86-VidModeExtension
[ 13105.575] (II) Initializing extension XFree86-DGA
[ 13105.575] (II) Initializing extension XFree86-DRI
[ 13105.575] (II) Initializing extension DRI2
[ 13105.578] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13105.583] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 13105.584] (II) intel(0): Setting screen physical size to 508 x 285
[ 13105.606] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 13105.606] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 13105.606] (II) LoadModule: "libinput"
[ 13105.606] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13105.607] (II) Module libinput: vendor="X.Org Foundation"
[ 13105.607] compiled for 1.20.13, module version = 1.2.0
[ 13105.607] Module class: X.Org XInput Driver
[ 13105.607] ABI class: X.Org XInput driver, version 24.1
[ 13105.607] (II) Using input driver 'libinput' for 'Video Bus'
[ 13105.607] (**) Video Bus: always reports core events
[ 13105.607] (**) Option "Device" "/dev/input/event3"
[ 13105.607] (**) Option "_source" "server/udev"
[ 13105.609] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 13105.609] (II) event3 - Video Bus: device is a keyboard
[ 13105.609] (II) event3 - Video Bus: device removed
[ 13105.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 13105.622] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 13105.622] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 13105.622] (II) event3 - Video Bus: device is a keyboard
[ 13105.623] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 13105.623] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13105.623] (II) Using input driver 'libinput' for 'Power Button'
[ 13105.623] (**) Power Button: always reports core events
[ 13105.623] (**) Option "Device" "/dev/input/event0"
[ 13105.623] (**) Option "_source" "server/udev"
[ 13105.623] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 13105.623] (II) event0 - Power Button: device is a keyboard
[ 13105.623] (II) event0 - Power Button: device removed
[ 13105.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 13105.639] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13105.640] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 13105.640] (II) event0 - Power Button: device is a keyboard
[ 13105.640] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 13105.640] (II) No input driver specified, ignoring this device.
[ 13105.640] (II) This device may have been added with another device file.
[ 13105.640] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 13105.640] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 13105.640] (II) Using input driver 'libinput' for 'Sleep Button'
[ 13105.640] (**) Sleep Button: always reports core events
[ 13105.640] (**) Option "Device" "/dev/input/event1"
[ 13105.640] (**) Option "_source" "server/udev"
[ 13105.641] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 13105.641] (II) event1 - Sleep Button: device is a keyboard
[ 13105.641] (II) event1 - Sleep Button: device removed
[ 13105.651] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 13105.651] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 13105.651] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 13105.651] (II) event1 - Sleep Button: device is a keyboard
[ 13105.652] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event25)
[ 13105.652] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 13105.652] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 13105.652] (**) PixArt USB Optical Mouse: always reports core events
[ 13105.652] (**) Option "Device" "/dev/input/event25"
[ 13105.652] (**) Option "_source" "server/udev"
[ 13105.653] (II) event25 - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[ 13105.653] (II) event25 - PixArt USB Optical Mouse: device is a pointer
[ 13105.653] (II) event25 - PixArt USB Optical Mouse: device removed
[ 13105.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1:1.0/0003:0461:4D0F.0002/input/input36/event25"
[ 13105.678] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 9)
[ 13105.678] (**) Option "AccelerationScheme" "none"
[ 13105.678] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 13105.678] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 13105.678] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 13105.680] (II) event25 - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[ 13105.680] (II) event25 - PixArt USB Optical Mouse: device is a pointer
[ 13105.681] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse3)
[ 13105.681] (II) No input driver specified, ignoring this device.
[ 13105.681] (II) This device may have been added with another device file.
[ 13105.682] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event26)
[ 13105.682] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 13105.682] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 13105.682] (**) Logitech USB Keyboard: always reports core events
[ 13105.682] (**) Option "Device" "/dev/input/event26"
[ 13105.682] (**) Option "_source" "server/udev"
[ 13105.684] (II) event26 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 13105.684] (II) event26 - Logitech USB Keyboard: device is a keyboard
[ 13105.684] (II) event26 - Logitech USB Keyboard: device removed
[ 13105.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.0/0003:046D:C31C.0003/input/input37/event26"
[ 13105.706] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 13105.708] (II) event26 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 13105.708] (II) event26 - Logitech USB Keyboard: device is a keyboard
[ 13105.710] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event27)
[ 13105.710] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 13105.710] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[ 13105.710] (**) Logitech USB Keyboard Consumer Control: always reports core events
[ 13105.710] (**) Option "Device" "/dev/input/event27"
[ 13105.710] (**) Option "_source" "server/udev"
[ 13105.711] (II) event27 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 13105.711] (II) event27 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 13105.712] (II) event27 - Logitech USB Keyboard Consumer Control: device removed
[ 13105.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.1/0003:046D:C31C.0004/input/input38/event27"
[ 13105.726] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[ 13105.728] (II) event27 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 13105.728] (II) event27 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 13105.729] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event28)
[ 13105.729] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 13105.729] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[ 13105.729] (**) Logitech USB Keyboard System Control: always reports core events
[ 13105.729] (**) Option "Device" "/dev/input/event28"
[ 13105.729] (**) Option "_source" "server/udev"
[ 13105.731] (II) event28 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 13105.731] (II) event28 - Logitech USB Keyboard System Control: device is a keyboard
[ 13105.731] (II) event28 - Logitech USB Keyboard System Control: device removed
[ 13105.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.1/0003:046D:C31C.0004/input/input39/event28"
[ 13105.746] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 12)
[ 13105.748] (II) event28 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 13105.748] (II) event28 - Logitech USB Keyboard System Control: device is a keyboard
[ 13105.749] (II) config/udev: Adding input device Chicony USB2.0 Camera: Chicony (/dev/input/event23)
[ 13105.749] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass "libinput keyboard catchall"
[ 13105.749] (II) Using input driver 'libinput' for 'Chicony USB2.0 Camera: Chicony '
[ 13105.749] (**) Chicony USB2.0 Camera: Chicony : always reports core events
[ 13105.749] (**) Option "Device" "/dev/input/event23"
[ 13105.749] (**) Option "_source" "server/udev"
[ 13105.750] (II) event23 - Chicony USB2.0 Camera: Chicony : is tagged by udev as: Keyboard
[ 13105.750] (II) event23 - Chicony USB2.0 Camera: Chicony : device is a keyboard
[ 13105.751] (II) event23 - Chicony USB2.0 Camera: Chicony : device removed
[ 13105.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input34/event23"
[ 13105.778] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera: Chicony " (type: KEYBOARD, id 13)
[ 13105.779] (II) event23 - Chicony USB2.0 Camera: Chicony : is tagged by udev as: Keyboard
[ 13105.779] (II) event23 - Chicony USB2.0 Camera: Chicony : device is a keyboard
[ 13105.780] (II) config/udev: Adding input device Chicony USB2.0 Camera: IR Camer (/dev/input/event24)
[ 13105.780] (**) Chicony USB2.0 Camera: IR Camer: Applying InputClass "libinput keyboard catchall"
[ 13105.780] (II) Using input driver 'libinput' for 'Chicony USB2.0 Camera: IR Camer'
[ 13105.780] (**) Chicony USB2.0 Camera: IR Camer: always reports core events
[ 13105.780] (**) Option "Device" "/dev/input/event24"
[ 13105.780] (**) Option "_source" "server/udev"
[ 13105.782] (II) event24 - Chicony USB2.0 Camera: IR Camer: is tagged by udev as: Keyboard
[ 13105.782] (II) event24 - Chicony USB2.0 Camera: IR Camer: device is a keyboard
[ 13105.782] (II) event24 - Chicony USB2.0 Camera: IR Camer: device removed
[ 13105.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.2/input/input35/event24"
[ 13105.810] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera: IR Camer" (type: KEYBOARD, id 14)
[ 13105.811] (II) event24 - Chicony USB2.0 Camera: IR Camer: is tagged by udev as: Keyboard
[ 13105.812] (II) event24 - Chicony USB2.0 Camera: IR Camer: device is a keyboard
[ 13105.813] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/event7)
[ 13105.813] (**) FTCS1000:00 04F3:311D Mouse: Applying InputClass "libinput pointer catchall"
[ 13105.813] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Mouse'
[ 13105.813] (**) FTCS1000:00 04F3:311D Mouse: always reports core events
[ 13105.813] (**) Option "Device" "/dev/input/event7"
[ 13105.813] (**) Option "_source" "server/udev"
[ 13105.814] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 13105.814] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 13105.816] (II) event7 - FTCS1000:00 04F3:311D Mouse: device removed
[ 13105.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input16/event7"
[ 13105.838] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Mouse" (type: MOUSE, id 15)
[ 13105.838] (**) Option "AccelerationScheme" "none"
[ 13105.838] (**) FTCS1000:00 04F3:311D Mouse: (accel) selected scheme none/0
[ 13105.838] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration factor: 2.000
[ 13105.838] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration threshold: 4
[ 13105.839] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 13105.840] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 13105.842] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/mouse0)
[ 13105.842] (II) No input driver specified, ignoring this device.
[ 13105.842] (II) This device may have been added with another device file.
[ 13105.843] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/event8)
[ 13105.843] (**) FTCS1000:00 04F3:311D Touchpad: Applying InputClass "libinput touchpad catchall"
[ 13105.843] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Touchpad'
[ 13105.843] (**) FTCS1000:00 04F3:311D Touchpad: always reports core events
[ 13105.843] (**) Option "Device" "/dev/input/event8"
[ 13105.843] (**) Option "_source" "server/udev"
[ 13105.844] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 13105.846] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 13105.846] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device removed
[ 13105.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input18/event8"
[ 13105.870] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Touchpad" (type: TOUCHPAD, id 16)
[ 13105.872] (**) Option "AccelerationScheme" "none"
[ 13105.872] (**) FTCS1000:00 04F3:311D Touchpad: (accel) selected scheme none/0
[ 13105.872] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration factor: 2.000
[ 13105.872] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration threshold: 4
[ 13105.874] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 13105.876] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 13105.877] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/mouse1)
[ 13105.877] (II) No input driver specified, ignoring this device.
[ 13105.877] (II) This device may have been added with another device file.
[ 13105.878] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 13105.878] (II) No input driver specified, ignoring this device.
[ 13105.878] (II) This device may have been added with another device file.
[ 13105.878] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 13105.878] (II) No input driver specified, ignoring this device.
[ 13105.878] (II) This device may have been added with another device file.
[ 13105.878] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 13105.878] (II) No input driver specified, ignoring this device.
[ 13105.878] (II) This device may have been added with another device file.
[ 13105.879] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 13105.879] (II) No input driver specified, ignoring this device.
[ 13105.879] (II) This device may have been added with another device file.
[ 13105.879] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[ 13105.879] (II) No input driver specified, ignoring this device.
[ 13105.879] (II) This device may have been added with another device file.
[ 13105.879] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[ 13105.879] (II) No input driver specified, ignoring this device.
[ 13105.879] (II) This device may have been added with another device file.
[ 13105.880] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=11 (/dev/input/event15)
[ 13105.880] (II) No input driver specified, ignoring this device.
[ 13105.880] (II) This device may have been added with another device file.
[ 13105.880] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=12 (/dev/input/event16)
[ 13105.880] (II) No input driver specified, ignoring this device.
[ 13105.880] (II) This device may have been added with another device file.
[ 13105.881] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=13 (/dev/input/event17)
[ 13105.881] (II) No input driver specified, ignoring this device.
[ 13105.881] (II) This device may have been added with another device file.
[ 13105.881] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=14 (/dev/input/event18)
[ 13105.881] (II) No input driver specified, ignoring this device.
[ 13105.881] (II) This device may have been added with another device file.
[ 13105.882] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=15 (/dev/input/event19)
[ 13105.882] (II) No input driver specified, ignoring this device.
[ 13105.882] (II) This device may have been added with another device file.
[ 13105.882] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=16 (/dev/input/event20)
[ 13105.882] (II) No input driver specified, ignoring this device.
[ 13105.882] (II) This device may have been added with another device file.
[ 13105.882] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=17 (/dev/input/event21)
[ 13105.882] (II) No input driver specified, ignoring this device.
[ 13105.882] (II) This device may have been added with another device file.
[ 13105.883] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 13105.883] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 13105.883] (II) Using input driver 'libinput' for 'Intel HID events'
[ 13105.883] (**) Intel HID events: always reports core events
[ 13105.883] (**) Option "Device" "/dev/input/event5"
[ 13105.883] (**) Option "_source" "server/udev"
[ 13105.883] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 13105.883] (II) event5 - Intel HID events: device is a keyboard
[ 13105.884] (II) event5 - Intel HID events: device removed
[ 13105.902] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input9/event5"
[ 13105.902] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[ 13105.903] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 13105.903] (II) event5 - Intel HID events: device is a keyboard
[ 13105.904] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 13105.904] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13105.904] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13105.904] (**) AT Translated Set 2 keyboard: always reports core events
[ 13105.904] (**) Option "Device" "/dev/input/event4"
[ 13105.904] (**) Option "_source" "server/udev"
[ 13105.905] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 13105.905] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 13105.906] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 13105.920] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 13105.920] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 13105.921] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 13105.921] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 13105.924] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event22)
[ 13105.924] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 13105.924] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 13105.924] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 13105.924] (**) Option "Device" "/dev/input/event22"
[ 13105.924] (**) Option "_source" "server/udev"
[ 13105.924] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 13105.926] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 13105.927] (II) event22 - ETPS/2 Elantech Touchpad: device removed
[ 13105.950] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input15/event22"
[ 13105.950] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[ 13105.952] (**) Option "AccelerationScheme" "none"
[ 13105.952] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 13105.952] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 13105.952] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 13105.953] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 13105.955] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 13105.956] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
[ 13105.956] (II) No input driver specified, ignoring this device.
[ 13105.956] (II) This device may have been added with another device file.
[ 13105.956] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 13105.956] (II) No input driver specified, ignoring this device.
[ 13105.956] (II) This device may have been added with another device file.
[ 13107.552] (II) intel(0): EDID vendor "AUO", prod id 25149
[ 13107.552] (II) intel(0): Printing DDC gathered Modelines:
[ 13107.552] (II) intel(0): Modeline "1920x1080"x0.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[ 13114.104] (II) intel(0): resizing framebuffer to 3840x1686
[ 13114.168] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 606), rotation normal, reflection none
[ 13114.210] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (1920, 0), rotation normal, reflection none
[ 14349.150] (EE) event26 - Logitech USB Keyboard: client bug: event processing lagging behind by 27ms, your system is too slow
[ 16084.276] (EE) event26 - Logitech USB Keyboard: client bug: event processing lagging behind by 33ms, your system is too slow
[ 16260.810] (EE) event26 - Logitech USB Keyboard: client bug: event processing lagging behind by 21ms, your system is too slow
Also X looks fine besides 2 things:
1. "(EE) AIGLX error: Calling driver entry point failed"
2. "(EE) event26 - Logitech USB Keyboard: client bug: event processing lagging behind by 33ms, your system is too slow"
But I am not sure these could be the problem.
Switching to a different USB keyboard doesn't help.
After a while I also start getting "lagging behind" errors for the mouse (I am more a keyboard user than a mouse one).
If I switch to the character based console (CTL-ALT-F2) , keyboard I/O shows usual instantaneous responsiveness.
Switching back to X/KDE brings me back to the issue.
I also see that my infrared camera is identified as a keybaord!
The CPU (I can sport 8 cores) isn't usually that overloaded (load avg < 4) but, I can see via htop than the browser gets to 100+% CPU usage.
Any hint to troubleshoot (and maybe fix) this?
Last edited by 0BADC0DE (2021-11-04 09:43:31)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Remove xf86-video-intel and any configuration files you created for it as it's a buggy unmaintained mess.
Last edited by V1del (2021-10-31 19:20:56)
Offline
Remove xf86-video-intel and any configuration files you created for it as it's a buggy unmaintained mess.
Hmmm ... will try this!
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
I did that and also commented out The configuration I have in /etc/X11/xorg.conf.d/20-intel.conf:
#Section "Device"
# Identifier "Intel Graphics"
# Driver "intel"
# #Option "AccelMethod" "uxa"
#EndSection
Now the DE is barely usable.
Shall I also disable other drivers (like KMS)?
Last edited by 0BADC0DE (2021-10-31 19:53:41)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
No you want KMS being used, repost the current xorg.log and
glxinfo -B
qdbus org.kde.KWin /KWin org.kde.KWin.supportInformation
Offline
/var/log/Xorg.0.log
[ 2.791] (--) Log file renamed from "/var/log/Xorg.pid-462.log" to "/var/log/Xorg.0.log"
[ 2.793]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 2.793] Build Operating System: Linux Archlinux
[ 2.793] Current Operating System: Linux Feynman 5.14.14-zen1-1-zen #1 ZEN SMP PREEMPT Wed, 20 Oct 2021 21:35:17 +0000 x86_64
[ 2.793] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=c3d87e5b-e300-429f-9d76-6c4c9c8d9b69 rw loglevel=3 quiet
[ 2.793] Build Date: 31 October 2021 06:30:01AM
[ 2.793]
[ 2.793] Current version of pixman: 0.40.0
[ 2.793] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.793] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.793] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 31 22:17:48 2021
[ 2.794] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.794] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.794] (==) No Layout section. Using the first Screen section.
[ 2.794] (==) No screen section available. Using defaults.
[ 2.794] (**) |-->Screen "Default Screen Section" (0)
[ 2.794] (**) | |-->Monitor "<default monitor>"
[ 2.795] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.795] (==) Automatically adding devices
[ 2.795] (==) Automatically enabling devices
[ 2.795] (==) Automatically adding GPU devices
[ 2.795] (==) Automatically binding GPU devices
[ 2.795] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2.795] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 2.795] Entry deleted from font path.
[ 2.795] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 2.795] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 2.795] Entry deleted from font path.
[ 2.795] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 2.796] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 2.796] Entry deleted from font path.
[ 2.796] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 2.796] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 2.796] Entry deleted from font path.
[ 2.796] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 2.796] Entry deleted from font path.
[ 2.796] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 2.796] Entry deleted from font path.
[ 2.796] (==) FontPath set to:
[ 2.796] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.796] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.796] (II) Module ABI versions:
[ 2.796] X.Org ANSI C Emulation: 0.4
[ 2.796] X.Org Video Driver: 24.1
[ 2.796] X.Org XInput driver : 24.1
[ 2.796] X.Org Server Extension : 10.0
[ 2.796] (++) using VT number 1
[ 2.797] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 2.798] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2.809] (--) PCI:*(0@0:2:0) 8086:9a49:1558:14a1 rev 1, Mem @ 0x85000000/16777216, 0x70000000/134217728, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 2.810] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2.810] (II) LoadModule: "glx"
[ 2.812] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.817] (II) Module glx: vendor="X.Org Foundation"
[ 2.817] compiled for 1.20.13, module version = 1.0.0
[ 2.817] ABI class: X.Org Server Extension, version 10.0
[ 2.817] (==) Matched intel as autoconfigured driver 0
[ 2.817] (==) Matched modesetting as autoconfigured driver 1
[ 2.817] (==) Matched fbdev as autoconfigured driver 2
[ 2.817] (==) Matched vesa as autoconfigured driver 3
[ 2.817] (==) Assigned the driver to the xf86ConfigLayout
[ 2.817] (II) LoadModule: "intel"
[ 2.817] (WW) Warning, couldn't open module intel
[ 2.817] (EE) Failed to load module "intel" (module does not exist, 0)
[ 2.817] (II) LoadModule: "modesetting"
[ 2.817] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2.820] (II) Module modesetting: vendor="X.Org Foundation"
[ 2.820] compiled for 1.20.13, module version = 1.20.13
[ 2.820] Module class: X.Org Video Driver
[ 2.820] ABI class: X.Org Video Driver, version 24.1
[ 2.820] (II) LoadModule: "fbdev"
[ 2.820] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2.821] (II) Module fbdev: vendor="X.Org Foundation"
[ 2.821] compiled for 1.20.8, module version = 0.5.0
[ 2.821] Module class: X.Org Video Driver
[ 2.821] ABI class: X.Org Video Driver, version 24.1
[ 2.821] (II) LoadModule: "vesa"
[ 2.821] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2.821] (II) Module vesa: vendor="X.Org Foundation"
[ 2.821] compiled for 1.20.9, module version = 2.5.0
[ 2.821] Module class: X.Org Video Driver
[ 2.821] ABI class: X.Org Video Driver, version 24.1
[ 2.821] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2.821] (II) FBDEV: driver for framebuffer: fbdev
[ 2.821] (II) VESA: driver for VESA chipsets: vesa
[ 2.838] (II) modeset(0): using drv /dev/dri/card0
[ 2.838] (WW) Falling back to old probe method for fbdev
[ 2.838] (II) Loading sub module "fbdevhw"
[ 2.838] (II) LoadModule: "fbdevhw"
[ 2.839] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2.839] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2.839] compiled for 1.20.13, module version = 0.0.2
[ 2.839] ABI class: X.Org Video Driver, version 24.1
[ 2.839] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.839] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 2.839] (==) modeset(0): RGB weight 888
[ 2.839] (==) modeset(0): Default visual is TrueColor
[ 2.839] (II) Loading sub module "glamoregl"
[ 2.839] (II) LoadModule: "glamoregl"
[ 2.839] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2.846] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2.846] compiled for 1.20.13, module version = 1.0.1
[ 2.846] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.944] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Xe Graphics (TGL GT2)
[ 2.944] (II) modeset(0): glamor initialized
[ 2.945] (II) modeset(0): Output eDP-1 has no monitor section
[ 2.973] (II) modeset(0): Output HDMI-1 has no monitor section
[ 2.974] (II) modeset(0): Output DP-1 has no monitor section
[ 2.974] (II) modeset(0): Output DP-2 has no monitor section
[ 2.974] (II) modeset(0): Output DP-3 has no monitor section
[ 2.974] (II) modeset(0): Output DP-4 has no monitor section
[ 2.976] (II) modeset(0): EDID for output eDP-1
[ 2.976] (II) modeset(0): Manufacturer: AUO Model: 623d Serial#: 0
[ 2.976] (II) modeset(0): Year: 2018 Week: 0
[ 2.976] (II) modeset(0): EDID Version: 1.4
[ 2.976] (II) modeset(0): Digital Display Input
[ 2.976] (II) modeset(0): 8 bits per channel
[ 2.976] (II) modeset(0): Digital interface is DisplayPort
[ 2.976] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 2.976] (II) modeset(0): Gamma: 2.20
[ 2.976] (II) modeset(0): No DPMS capabilities specified
[ 2.976] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 2.976] (II) modeset(0): First detailed timing is preferred mode
[ 2.976] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 2.976] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 2.976] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 2.976] (II) modeset(0): Manufacturer's mask: 0
[ 2.976] (II) modeset(0): Supported detailed timing:
[ 2.976] (II) modeset(0): clock: 141.0 MHz Image Size: 309 x 174 mm
[ 2.976] (II) modeset(0): h_active: 1920 h_sync: 1936 h_sync_end 1952 h_blank_end 2104 h_border: 0
[ 2.976] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1097 v_blanking: 1116 v_border: 0
[ 2.976] (II) modeset(0): Unknown vendor-specific block f
[ 2.976] (II) modeset(0): AUO
[ 2.976] (II) modeset(0): B140HAN06.2
[ 2.976] (II) modeset(0): EDID (in hex):
[ 2.976] (II) modeset(0): 00ffffffffffff0006af3d6200000000
[ 2.976] (II) modeset(0): 001c0104a51f117802ee95a3544c9926
[ 2.976] (II) modeset(0): 0f505400000001010101010101010101
[ 2.976] (II) modeset(0): 010101010101143780b8703824401010
[ 2.976] (II) modeset(0): 3e0035ae100000180000000f00000000
[ 2.976] (II) modeset(0): 00000000000000000020000000fe0041
[ 2.976] (II) modeset(0): 554f0a202020202020202020000000fe
[ 2.976] (II) modeset(0): 004231343048414e30362e32200a002a
[ 2.976] (II) modeset(0): Printing probed modes for output eDP-1
[ 2.976] (II) modeset(0): Modeline "1920x1080"x60.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[ 2.976] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 2.976] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 2.976] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 2.976] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 2.976] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 2.976] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 2.976] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 2.976] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 2.976] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 2.976] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 2.976] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 2.976] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 2.976] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 2.976] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 2.976] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 2.976] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 2.976] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 2.976] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 2.976] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2.976] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2.976] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2.977] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2.977] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 2.977] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 2.977] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2.977] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2.977] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 2.977] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 2.977] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2.977] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 2.977] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 2.977] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 2.977] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 2.977] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2.977] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 2.977] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2.977] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2.977] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 2.977] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 2.977] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 2.977] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 2.977] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 2.977] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 3.007] (II) modeset(0): EDID for output HDMI-1
[ 3.007] (II) modeset(0): Manufacturer: SAM Model: b43 Serial#: 1515864408
[ 3.007] (II) modeset(0): Year: 2015 Week: 25
[ 3.007] (II) modeset(0): EDID Version: 1.3
[ 3.007] (II) modeset(0): Digital Display Input
[ 3.007] (II) modeset(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 3.007] (II) modeset(0): Gamma: 2.20
[ 3.007] (II) modeset(0): DPMS capabilities: Off
[ 3.007] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3.007] (II) modeset(0): First detailed timing is preferred mode
[ 3.007] (II) modeset(0): redX: 0.646 redY: 0.333 greenX: 0.315 greenY: 0.620
[ 3.007] (II) modeset(0): blueX: 0.151 blueY: 0.065 whiteX: 0.313 whiteY: 0.329
[ 3.007] (II) modeset(0): Supported established timings:
[ 3.007] (II) modeset(0): 720x400@70Hz
[ 3.007] (II) modeset(0): 640x480@60Hz
[ 3.007] (II) modeset(0): 640x480@67Hz
[ 3.007] (II) modeset(0): 640x480@72Hz
[ 3.007] (II) modeset(0): 640x480@75Hz
[ 3.007] (II) modeset(0): 800x600@56Hz
[ 3.007] (II) modeset(0): 800x600@60Hz
[ 3.007] (II) modeset(0): 800x600@72Hz
[ 3.007] (II) modeset(0): 800x600@75Hz
[ 3.007] (II) modeset(0): 832x624@75Hz
[ 3.007] (II) modeset(0): 1024x768@60Hz
[ 3.007] (II) modeset(0): 1024x768@70Hz
[ 3.007] (II) modeset(0): 1024x768@75Hz
[ 3.007] (II) modeset(0): 1280x1024@75Hz
[ 3.007] (II) modeset(0): 1152x864@75Hz
[ 3.007] (II) modeset(0): Manufacturer's mask: 0
[ 3.007] (II) modeset(0): Supported standard timings:
[ 3.007] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 3.007] (II) modeset(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 3.007] (II) modeset(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 3.007] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 3.007] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 3.007] (II) modeset(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 3.007] (II) modeset(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 3.007] (II) modeset(0): Supported detailed timing:
[ 3.007] (II) modeset(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 3.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 3.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 3.007] (II) modeset(0): Supported detailed timing:
[ 3.007] (II) modeset(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 3.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 3.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 3.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 3.007] (II) modeset(0): Monitor name: S24D300
[ 3.007] (II) modeset(0): Supported detailed timing:
[ 3.007] (II) modeset(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 3.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 3.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 3.007] (II) modeset(0): Supported detailed timing:
[ 3.007] (II) modeset(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 3.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 3.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 3.007] (II) modeset(0): Supported detailed timing:
[ 3.007] (II) modeset(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 3.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 3.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 3.007] (II) modeset(0): Number of EDID sections to follow: 1
[ 3.007] (II) modeset(0): EDID (in hex):
[ 3.007] (II) modeset(0): 00ffffffffffff004c2d430b58415a5a
[ 3.007] (II) modeset(0): 1919010380351e782a9ff5a555509e26
[ 3.007] (II) modeset(0): 105054bfef80714f81c0810081809500
[ 3.007] (II) modeset(0): a9c0b3000101023a801871382d40582c
[ 3.007] (II) modeset(0): 4500132b2100001e011d007251d01e20
[ 3.007] (II) modeset(0): 6e285500132b2100001e000000fd0032
[ 3.007] (II) modeset(0): 4b1e5111000a202020202020000000fc
[ 3.007] (II) modeset(0): 00533234443330300a2020202020010b
[ 3.007] (II) modeset(0): 020311b14690041f13031265030c0010
[ 3.007] (II) modeset(0): 00011d00bc52d01e20b8285540132b21
[ 3.007] (II) modeset(0): 00001e8c0ad090204031200c40550013
[ 3.007] (II) modeset(0): 2b210000188c0ad08a20e02d10103e96
[ 3.007] (II) modeset(0): 00132b21000018000000000000000000
[ 3.007] (II) modeset(0): 00000000000000000000000000000000
[ 3.007] (II) modeset(0): 00000000000000000000000000000000
[ 3.007] (II) modeset(0): 00000000000000000000000000000021
[ 3.007] (II) modeset(0): Printing probed modes for output HDMI-1
[ 3.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 3.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 3.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 3.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 3.007] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 3.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 3.007] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 3.007] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 3.007] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 3.007] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 3.007] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 3.007] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 3.007] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 3.007] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 3.007] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 3.007] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 3.007] (II) modeset(0): EDID for output DP-1
[ 3.008] (II) modeset(0): EDID for output DP-2
[ 3.008] (II) modeset(0): EDID for output DP-3
[ 3.008] (II) modeset(0): EDID for output DP-4
[ 3.008] (II) modeset(0): Output eDP-1 connected
[ 3.008] (II) modeset(0): Output HDMI-1 connected
[ 3.008] (II) modeset(0): Output DP-1 disconnected
[ 3.008] (II) modeset(0): Output DP-2 disconnected
[ 3.008] (II) modeset(0): Output DP-3 disconnected
[ 3.008] (II) modeset(0): Output DP-4 disconnected
[ 3.008] (II) modeset(0): Using spanning desktop for initial modes
[ 3.008] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 3.008] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1920+0
[ 3.008] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3.008] (==) modeset(0): DPI set to (96, 96)
[ 3.008] (II) Loading sub module "fb"
[ 3.008] (II) LoadModule: "fb"
[ 3.008] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3.008] (II) Module fb: vendor="X.Org Foundation"
[ 3.008] compiled for 1.20.13, module version = 1.0.0
[ 3.008] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.008] (II) UnloadModule: "fbdev"
[ 3.008] (II) Unloading fbdev
[ 3.008] (II) UnloadSubModule: "fbdevhw"
[ 3.008] (II) Unloading fbdevhw
[ 3.008] (II) UnloadModule: "vesa"
[ 3.008] (II) Unloading vesa
[ 3.032] (==) modeset(0): Backing store enabled
[ 3.032] (==) modeset(0): Silken mouse disabled
[ 3.239] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 3.239] (==) modeset(0): DPMS enabled
[ 3.239] (II) modeset(0): [DRI2] Setup complete
[ 3.239] (II) modeset(0): [DRI2] DRI driver: iris
[ 3.239] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 3.239] (II) Initializing extension Generic Event Extension
[ 3.239] (II) Initializing extension SHAPE
[ 3.239] (II) Initializing extension MIT-SHM
[ 3.239] (II) Initializing extension XInputExtension
[ 3.240] (II) Initializing extension XTEST
[ 3.240] (II) Initializing extension BIG-REQUESTS
[ 3.240] (II) Initializing extension SYNC
[ 3.240] (II) Initializing extension XKEYBOARD
[ 3.240] (II) Initializing extension XC-MISC
[ 3.240] (II) Initializing extension SECURITY
[ 3.240] (II) Initializing extension XFIXES
[ 3.241] (II) Initializing extension RENDER
[ 3.241] (II) Initializing extension RANDR
[ 3.241] (II) Initializing extension COMPOSITE
[ 3.241] (II) Initializing extension DAMAGE
[ 3.241] (II) Initializing extension MIT-SCREEN-SAVER
[ 3.242] (II) Initializing extension DOUBLE-BUFFER
[ 3.242] (II) Initializing extension RECORD
[ 3.242] (II) Initializing extension DPMS
[ 3.242] (II) Initializing extension Present
[ 3.242] (II) Initializing extension DRI3
[ 3.242] (II) Initializing extension X-Resource
[ 3.242] (II) Initializing extension XVideo
[ 3.242] (II) Initializing extension XVideo-MotionCompensation
[ 3.242] (II) Initializing extension GLX
[ 3.251] (II) AIGLX: Loaded and initialized iris
[ 3.251] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.251] (II) Initializing extension XFree86-VidModeExtension
[ 3.251] (II) Initializing extension XFree86-DGA
[ 3.251] (II) Initializing extension XFree86-DRI
[ 3.251] (II) Initializing extension DRI2
[ 3.321] (II) modeset(0): Damage tracking initialized
[ 3.322] (II) modeset(0): Setting screen physical size to 1016 x 285
[ 3.388] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 3.388] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3.388] (II) LoadModule: "libinput"
[ 3.388] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 3.391] (II) Module libinput: vendor="X.Org Foundation"
[ 3.391] compiled for 1.20.13, module version = 1.2.0
[ 3.391] Module class: X.Org XInput Driver
[ 3.391] ABI class: X.Org XInput driver, version 24.1
[ 3.391] (II) Using input driver 'libinput' for 'Video Bus'
[ 3.391] (**) Video Bus: always reports core events
[ 3.391] (**) Option "Device" "/dev/input/event3"
[ 3.391] (**) Option "_source" "server/udev"
[ 3.397] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3.398] (II) event3 - Video Bus: device is a keyboard
[ 3.398] (II) event3 - Video Bus: device removed
[ 3.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 3.515] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 3.516] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 3.517] (II) event3 - Video Bus: device is a keyboard
[ 3.517] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3.518] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3.518] (II) Using input driver 'libinput' for 'Power Button'
[ 3.518] (**) Power Button: always reports core events
[ 3.518] (**) Option "Device" "/dev/input/event0"
[ 3.518] (**) Option "_source" "server/udev"
[ 3.519] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 3.519] (II) event0 - Power Button: device is a keyboard
[ 3.519] (II) event0 - Power Button: device removed
[ 3.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 3.612] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3.613] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 3.613] (II) event0 - Power Button: device is a keyboard
[ 3.614] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3.614] (II) No input driver specified, ignoring this device.
[ 3.614] (II) This device may have been added with another device file.
[ 3.614] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 3.614] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 3.614] (II) Using input driver 'libinput' for 'Sleep Button'
[ 3.614] (**) Sleep Button: always reports core events
[ 3.614] (**) Option "Device" "/dev/input/event1"
[ 3.614] (**) Option "_source" "server/udev"
[ 3.616] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 3.616] (II) event1 - Sleep Button: device is a keyboard
[ 3.616] (II) event1 - Sleep Button: device removed
[ 3.621] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 3.621] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3.622] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 3.622] (II) event1 - Sleep Button: device is a keyboard
[ 3.624] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/event7)
[ 3.624] (**) FTCS1000:00 04F3:311D Mouse: Applying InputClass "libinput pointer catchall"
[ 3.624] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Mouse'
[ 3.624] (**) FTCS1000:00 04F3:311D Mouse: always reports core events
[ 3.624] (**) Option "Device" "/dev/input/event7"
[ 3.624] (**) Option "_source" "server/udev"
[ 3.625] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 3.626] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 3.627] (II) event7 - FTCS1000:00 04F3:311D Mouse: device removed
[ 3.722] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input16/event7"
[ 3.722] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Mouse" (type: MOUSE, id 9)
[ 3.723] (**) Option "AccelerationScheme" "none"
[ 3.723] (**) FTCS1000:00 04F3:311D Mouse: (accel) selected scheme none/0
[ 3.723] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration factor: 2.000
[ 3.723] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration threshold: 4
[ 3.724] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 3.725] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 3.726] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/mouse0)
[ 3.726] (II) No input driver specified, ignoring this device.
[ 3.726] (II) This device may have been added with another device file.
[ 3.727] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/event8)
[ 3.727] (**) FTCS1000:00 04F3:311D Touchpad: Applying InputClass "libinput touchpad catchall"
[ 3.727] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Touchpad'
[ 3.727] (**) FTCS1000:00 04F3:311D Touchpad: always reports core events
[ 3.727] (**) Option "Device" "/dev/input/event8"
[ 3.727] (**) Option "_source" "server/udev"
[ 3.729] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 3.731] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 3.731] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device removed
[ 3.828] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input18/event8"
[ 3.828] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Touchpad" (type: TOUCHPAD, id 10)
[ 3.831] (**) Option "AccelerationScheme" "none"
[ 3.831] (**) FTCS1000:00 04F3:311D Touchpad: (accel) selected scheme none/0
[ 3.831] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration factor: 2.000
[ 3.831] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration threshold: 4
[ 3.833] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 3.835] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 3.836] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/mouse1)
[ 3.836] (II) No input driver specified, ignoring this device.
[ 3.836] (II) This device may have been added with another device file.
[ 3.837] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 3.837] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 3.837] (II) Using input driver 'libinput' for 'Intel HID events'
[ 3.837] (**) Intel HID events: always reports core events
[ 3.837] (**) Option "Device" "/dev/input/event5"
[ 3.837] (**) Option "_source" "server/udev"
[ 3.838] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 3.838] (II) event5 - Intel HID events: device is a keyboard
[ 3.838] (II) event5 - Intel HID events: device removed
[ 3.848] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input9/event5"
[ 3.848] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 11)
[ 3.849] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 3.849] (II) event5 - Intel HID events: device is a keyboard
[ 3.850] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 3.850] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 3.850] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 3.850] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.850] (**) Option "Device" "/dev/input/event4"
[ 3.850] (**) Option "_source" "server/udev"
[ 3.851] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3.851] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3.853] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 3.865] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 3.865] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 3.866] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3.866] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 3.868] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3.868] (II) No input driver specified, ignoring this device.
[ 3.868] (II) This device may have been added with another device file.
[ 3.990] (II) config/udev: removing device FTCS1000:00 04F3:311D Mouse
[ 3.990] (II) event7 - FTCS1000:00 04F3:311D Mouse: device removed
[ 4.010] (II) UnloadModule: "libinput"
[ 4.010] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/event7)
[ 4.010] (**) FTCS1000:00 04F3:311D Mouse: Applying InputClass "libinput pointer catchall"
[ 4.010] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Mouse'
[ 4.010] (**) FTCS1000:00 04F3:311D Mouse: always reports core events
[ 4.010] (**) Option "Device" "/dev/input/event7"
[ 4.010] (**) Option "_source" "server/udev"
[ 4.012] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 4.012] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 4.013] (II) event7 - FTCS1000:00 04F3:311D Mouse: device removed
[ 4.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input16/event7"
[ 4.024] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Mouse" (type: MOUSE, id 9)
[ 4.024] (**) Option "AccelerationScheme" "none"
[ 4.024] (**) FTCS1000:00 04F3:311D Mouse: (accel) selected scheme none/0
[ 4.024] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration factor: 2.000
[ 4.024] (**) FTCS1000:00 04F3:311D Mouse: (accel) acceleration threshold: 4
[ 4.026] (II) event7 - FTCS1000:00 04F3:311D Mouse: is tagged by udev as: Mouse Pointingstick
[ 4.026] (II) event7 - FTCS1000:00 04F3:311D Mouse: device is a pointer
[ 4.028] (II) config/udev: removing device FTCS1000:00 04F3:311D Touchpad
[ 4.028] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device removed
[ 4.045] (II) UnloadModule: "libinput"
[ 4.045] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/event8)
[ 4.045] (**) FTCS1000:00 04F3:311D Touchpad: Applying InputClass "libinput touchpad catchall"
[ 4.045] (II) Using input driver 'libinput' for 'FTCS1000:00 04F3:311D Touchpad'
[ 4.046] (**) FTCS1000:00 04F3:311D Touchpad: always reports core events
[ 4.046] (**) Option "Device" "/dev/input/event8"
[ 4.046] (**) Option "_source" "server/udev"
[ 4.047] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 4.050] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 4.050] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device removed
[ 4.069] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS1000:00/0018:04F3:311D.0001/input/input18/event8"
[ 4.069] (II) XINPUT: Adding extended input device "FTCS1000:00 04F3:311D Touchpad" (type: TOUCHPAD, id 10)
[ 4.071] (**) Option "AccelerationScheme" "none"
[ 4.071] (**) FTCS1000:00 04F3:311D Touchpad: (accel) selected scheme none/0
[ 4.071] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration factor: 2.000
[ 4.071] (**) FTCS1000:00 04F3:311D Touchpad: (accel) acceleration threshold: 4
[ 4.073] (II) event8 - FTCS1000:00 04F3:311D Touchpad: is tagged by udev as: Touchpad
[ 4.075] (II) event8 - FTCS1000:00 04F3:311D Touchpad: device is a touchpad
[ 4.076] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Mouse (/dev/input/mouse0)
[ 4.076] (II) No input driver specified, ignoring this device.
[ 4.076] (II) This device may have been added with another device file.
[ 4.077] (II) config/udev: Adding input device FTCS1000:00 04F3:311D Touchpad (/dev/input/mouse1)
[ 4.077] (II) No input driver specified, ignoring this device.
[ 4.077] (II) This device may have been added with another device file.
[ 4.078] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=15 (/dev/input/event19)
[ 4.078] (II) No input driver specified, ignoring this device.
[ 4.078] (II) This device may have been added with another device file.
[ 4.079] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 4.079] (II) No input driver specified, ignoring this device.
[ 4.079] (II) This device may have been added with another device file.
[ 4.079] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=13 (/dev/input/event17)
[ 4.079] (II) No input driver specified, ignoring this device.
[ 4.079] (II) This device may have been added with another device file.
[ 4.079] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 4.079] (II) No input driver specified, ignoring this device.
[ 4.079] (II) This device may have been added with another device file.
[ 4.079] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[ 4.079] (II) No input driver specified, ignoring this device.
[ 4.079] (II) This device may have been added with another device file.
[ 4.080] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=14 (/dev/input/event18)
[ 4.080] (II) No input driver specified, ignoring this device.
[ 4.080] (II) This device may have been added with another device file.
[ 4.080] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 4.080] (II) No input driver specified, ignoring this device.
[ 4.080] (II) This device may have been added with another device file.
[ 4.080] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=12 (/dev/input/event16)
[ 4.080] (II) No input driver specified, ignoring this device.
[ 4.080] (II) This device may have been added with another device file.
[ 4.081] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[ 4.081] (II) No input driver specified, ignoring this device.
[ 4.081] (II) This device may have been added with another device file.
[ 4.081] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=11 (/dev/input/event15)
[ 4.081] (II) No input driver specified, ignoring this device.
[ 4.081] (II) This device may have been added with another device file.
[ 4.081] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=16 (/dev/input/event20)
[ 4.081] (II) No input driver specified, ignoring this device.
[ 4.081] (II) This device may have been added with another device file.
[ 4.081] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=17 (/dev/input/event21)
[ 4.081] (II) No input driver specified, ignoring this device.
[ 4.081] (II) This device may have been added with another device file.
[ 4.082] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 4.082] (II) No input driver specified, ignoring this device.
[ 4.082] (II) This device may have been added with another device file.
[ 4.088] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
[ 4.088] (II) No input driver specified, ignoring this device.
[ 4.088] (II) This device may have been added with another device file.
[ 4.088] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event22)
[ 4.088] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 4.088] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 4.088] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4.088] (**) Option "Device" "/dev/input/event22"
[ 4.088] (**) Option "_source" "server/udev"
[ 4.090] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 4.092] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 4.092] (II) event22 - ETPS/2 Elantech Touchpad: device removed
[ 4.105] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input15/event22"
[ 4.105] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 4.107] (**) Option "AccelerationScheme" "none"
[ 4.107] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 4.107] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 4.107] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 4.108] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 4.110] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 4.470] (II) config/udev: Adding input device Chicony USB2.0 Camera: IR Camer (/dev/input/event24)
[ 4.470] (**) Chicony USB2.0 Camera: IR Camer: Applying InputClass "libinput keyboard catchall"
[ 4.470] (II) Using input driver 'libinput' for 'Chicony USB2.0 Camera: IR Camer'
[ 4.470] (**) Chicony USB2.0 Camera: IR Camer: always reports core events
[ 4.470] (**) Option "Device" "/dev/input/event24"
[ 4.470] (**) Option "_source" "server/udev"
[ 4.478] (II) event24 - Chicony USB2.0 Camera: IR Camer: is tagged by udev as: Keyboard
[ 4.479] (II) event24 - Chicony USB2.0 Camera: IR Camer: device is a keyboard
[ 4.479] (II) event24 - Chicony USB2.0 Camera: IR Camer: device removed
[ 4.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.2/input/input35/event24"
[ 4.489] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera: IR Camer" (type: KEYBOARD, id 14)
[ 4.511] (II) event24 - Chicony USB2.0 Camera: IR Camer: is tagged by udev as: Keyboard
[ 4.511] (II) event24 - Chicony USB2.0 Camera: IR Camer: device is a keyboard
[ 4.513] (II) config/udev: Adding input device Chicony USB2.0 Camera: Chicony (/dev/input/event23)
[ 4.513] (**) Chicony USB2.0 Camera: Chicony : Applying InputClass "libinput keyboard catchall"
[ 4.513] (II) Using input driver 'libinput' for 'Chicony USB2.0 Camera: Chicony '
[ 4.513] (**) Chicony USB2.0 Camera: Chicony : always reports core events
[ 4.513] (**) Option "Device" "/dev/input/event23"
[ 4.513] (**) Option "_source" "server/udev"
[ 4.515] (II) event23 - Chicony USB2.0 Camera: Chicony : is tagged by udev as: Keyboard
[ 4.515] (II) event23 - Chicony USB2.0 Camera: Chicony : device is a keyboard
[ 4.516] (II) event23 - Chicony USB2.0 Camera: Chicony : device removed
[ 4.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input34/event23"
[ 4.529] (II) XINPUT: Adding extended input device "Chicony USB2.0 Camera: Chicony " (type: KEYBOARD, id 15)
[ 4.531] (II) event23 - Chicony USB2.0 Camera: Chicony : is tagged by udev as: Keyboard
[ 4.531] (II) event23 - Chicony USB2.0 Camera: Chicony : device is a keyboard
[ 5.978] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse3)
[ 5.978] (II) No input driver specified, ignoring this device.
[ 5.978] (II) This device may have been added with another device file.
[ 5.994] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event27)
[ 5.994] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5.994] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[ 5.994] (**) Logitech USB Keyboard Consumer Control: always reports core events
[ 5.994] (**) Option "Device" "/dev/input/event27"
[ 5.994] (**) Option "_source" "server/udev"
[ 5.998] (II) event27 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 5.999] (II) event27 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 5.999] (II) event27 - Logitech USB Keyboard Consumer Control: device removed
[ 6.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.1/0003:046D:C31C.0004/input/input38/event27"
[ 6.010] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 16)
[ 6.013] (II) event27 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 6.014] (II) event27 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 6.016] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event28)
[ 6.016] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 6.016] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[ 6.016] (**) Logitech USB Keyboard System Control: always reports core events
[ 6.016] (**) Option "Device" "/dev/input/event28"
[ 6.016] (**) Option "_source" "server/udev"
[ 6.019] (II) event28 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 6.019] (II) event28 - Logitech USB Keyboard System Control: device is a keyboard
[ 6.020] (II) event28 - Logitech USB Keyboard System Control: device removed
[ 6.035] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.1/0003:046D:C31C.0004/input/input39/event28"
[ 6.035] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 17)
[ 6.038] (II) event28 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 6.038] (II) event28 - Logitech USB Keyboard System Control: device is a keyboard
[ 6.040] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event26)
[ 6.040] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.040] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 6.040] (**) Logitech USB Keyboard: always reports core events
[ 6.040] (**) Option "Device" "/dev/input/event26"
[ 6.040] (**) Option "_source" "server/udev"
[ 6.043] (II) event26 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 6.043] (II) event26 - Logitech USB Keyboard: device is a keyboard
[ 6.044] (II) event26 - Logitech USB Keyboard: device removed
[ 6.053] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.2/3-3.1.2:1.0/0003:046D:C31C.0003/input/input37/event26"
[ 6.053] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 18)
[ 6.056] (II) event26 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 6.056] (II) event26 - Logitech USB Keyboard: device is a keyboard
[ 6.058] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event25)
[ 6.058] (**) PixArt USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 6.058] (II) Using input driver 'libinput' for 'PixArt USB Optical Mouse'
[ 6.058] (**) PixArt USB Optical Mouse: always reports core events
[ 6.058] (**) Option "Device" "/dev/input/event25"
[ 6.058] (**) Option "_source" "server/udev"
[ 6.061] (II) event25 - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[ 6.061] (II) event25 - PixArt USB Optical Mouse: device is a pointer
[ 6.062] (II) event25 - PixArt USB Optical Mouse: device removed
[ 6.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1:1.0/0003:0461:4D0F.0002/input/input36/event25"
[ 6.096] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 19)
[ 6.096] (**) Option "AccelerationScheme" "none"
[ 6.096] (**) PixArt USB Optical Mouse: (accel) selected scheme none/0
[ 6.096] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 6.096] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 6.099] (II) event25 - PixArt USB Optical Mouse: is tagged by udev as: Mouse
[ 6.099] (II) event25 - PixArt USB Optical Mouse: device is a pointer
[ 14.077] (II) modeset(0): EDID vendor "SAM", prod id 2883
[ 14.078] (II) modeset(0): Using EDID range info for horizontal sync
[ 14.078] (II) modeset(0): Using EDID range info for vertical refresh
[ 14.078] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.078] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 14.078] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 14.078] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 14.078] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 14.078] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.078] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.078] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 14.078] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 14.078] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.078] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.078] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.078] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.078] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.078] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 14.078] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.078] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.078] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.078] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 14.078] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.452] (II) modeset(0): EDID vendor "SAM", prod id 2883
[ 14.452] (II) modeset(0): Using hsync ranges from config file
[ 14.452] (II) modeset(0): Using vrefresh ranges from config file
[ 14.452] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.452] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 14.452] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 14.452] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 14.452] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 14.452] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.452] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.452] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 14.452] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 14.452] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.452] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.452] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.452] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.452] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.452] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 14.452] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.452] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.452] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.452] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 14.452] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.574] (II) modeset(0): Allocate new frame buffer 3840x1686 stride
glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) Xe Graphics (TGL GT2) (0x9a49)
Version: 21.2.4
Accelerated: yes
Video memory: 3072MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) Xe Graphics (TGL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 21.2.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 21.2.4
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 21.2.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
qdbus org.kde.KWin /KWin org.kde.KWin.supportInformation
KWin Support Information:
The following information should be used when requesting support on e.g. https://forum.kde.org.
It provides information about the currently running instance, which options are used,
what OpenGL driver and which effects are running.
Please post the information provided underneath this introductory text to a paste bin service
like https://paste.kde.org instead of pasting into support threads.
==========================
Version
=======
KWin version: 5.23.2
Qt Version: 5.15.2
Qt compile version: 5.15.2
XCB compile version: 1.14
Operation Mode: X11 only
Build Options
=============
KWIN_BUILD_DECORATIONS: yes
KWIN_BUILD_TABBOX: yes
KWIN_BUILD_ACTIVITIES: yes
HAVE_GBM: yes
HAVE_EGL_STREAMS: yes
HAVE_X11_XCB: yes
HAVE_EPOXY_GLX: yes
HAVE_WAYLAND_EGL: yes
X11
===
Vendor: The X.Org Foundation
Vendor Release: 12013000
Protocol Version/Revision: 11/0
SHAPE: yes; Version: 0x11
RANDR: yes; Version: 0x14
DAMAGE: yes; Version: 0x11
Composite: yes; Version: 0x4
RENDER: yes; Version: 0xb
XFIXES: yes; Version: 0x50
SYNC: yes; Version: 0x31
GLX: yes; Version: 0x0
Decoration
==========
Plugin: org.kde.kwin.aurorae
Theme: kwin4_decoration_qml_plastik
Plugin recommends border size: No
Blur: 1
onAllDesktopsAvailable: false
alphaChannelSupported: true
closeOnDoubleClickOnMenu: true
decorationButtonsLeft:
decorationButtonsRight: 9, 3, 4, 5
borderSize: 2
gridUnit: 10
font: Noto Sans,10,-1,0,50,0,0,0,0,0
smallSpacing: 2
largeSpacing: 10
Platform
==========
Name: KWin::X11StandalonePlatform
Cursor
======
themeName: Mocu-White-Right
themeSize: 24
Options
=======
focusPolicy: 0
xwaylandCrashPolicy:
xwaylandMaxCrashCount: 3
nextFocusPrefersMouse: false
clickRaise: true
autoRaise: false
autoRaiseInterval: 0
delayFocusInterval: 0
shadeHover: false
shadeHoverInterval: 250
separateScreenFocus: false
activeMouseScreen: true
placement: 4
focusPolicyIsReasonable: true
borderSnapZone: 10
windowSnapZone: 10
centerSnapZone: 0
snapOnlyWhenOverlapping: false
rollOverDesktops: true
focusStealingPreventionLevel: 1
operationTitlebarDblClick: 5019
operationMaxButtonLeftClick: 5000
operationMaxButtonMiddleClick: 5015
operationMaxButtonRightClick: 5014
commandActiveTitlebar1: 0
commandActiveTitlebar2: 28
commandActiveTitlebar3: 2
commandInactiveTitlebar1: 4
commandInactiveTitlebar2: 28
commandInactiveTitlebar3: 2
commandWindow1: 7
commandWindow2: 8
commandWindow3: 8
commandWindowWheel: 28
commandAll1: 10
commandAll2: 3
commandAll3: 14
keyCmdAllModKey: 16777250
showGeometryTip: false
condensedTitle: false
electricBorderMaximize: true
electricBorderTiling: true
electricBorderCornerRatio: 0.25
borderlessMaximizedWindows: false
killPingTimeout: 5000
hideUtilityWindowsForInactive: true
compositingMode: 1
useCompositing: true
hiddenPreviews: 1
glSmoothScale: 1
glStrictBinding: true
glStrictBindingFollowsDriver: true
glCoreProfile: false
glPreferBufferSwap: 101
glPlatformInterface: 1
windowsBlockCompositing: false
latencyPolicy:
renderTimeEstimator:
Screen Edges
============
desktopSwitching: false
desktopSwitchingMovingClients: false
cursorPushBackDistance: 1x1
timeThreshold: 150
reActivateThreshold: 350
actionTopLeft: 0
actionTop: 0
actionTopRight: 0
actionRight: 0
actionBottomRight: 0
actionBottom: 0
actionBottomLeft: 0
actionLeft: 0
Screens
=======
Multi-Head: no
Active screen follows mouse: yes
Number of Screens: 2
Screen 0:
---------
Name: eDP-1
Geometry: 0,606,1920x1080
Scale: 1
Refresh Rate: 60049
Screen 1:
---------
Name: HDMI-1
Geometry: 1920,0,1920x1080
Scale: 1
Refresh Rate: 60000
Compositing
===========
Compositing is active
Compositing Type: OpenGL
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) Xe Graphics (TGL GT2)
OpenGL version string: 4.6 (Compatibility Profile) Mesa 21.2.4
OpenGL platform interface: GLX
OpenGL shading language version string: 4.60
Driver: Intel
GPU class: Tiger Lake
OpenGL version: 4.6
GLSL version: 4.60
Mesa version: 21.2.4
X server version: 1.20.13
Linux kernel version: 5.14.14
Direct rendering: Requires strict binding: yes
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
OpenGL 2 Shaders are used
Loaded Effects:
---------------
kwin4_effect_sessionquit
screenshot
colorpicker
highlightwindow
startupfeedback
kscreen
Currently Active Effects:
-------------------------
Effect Settings:
----------------
kwin4_effect_sessionquit:
pluginId: kwin4_effect_sessionquit
isActiveFullScreenEffect: false
screenshot:
colorpicker:
highlightwindow:
startupfeedback:
type: 2
kscreen:
Loaded Plugins:
---------------
kwin5_plugin_krunner
kwin5_plugin_nightcolor
Available Plugins:
------------------
kwin5_plugin_colord
kwin5_plugin_krunner
kwin5_plugin_nightcolor
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Is this a problem when you suspend the compositor (Shift+Alt+F12)?
Offline
Is this a problem when you suspend the compositor (Shift+Alt+F12)?
If I idsable it (with the shortcut) it becomes responsive!
So, what's the recipe for the magic potion?
Shall I disable compositing?
Last edited by 0BADC0DE (2021-11-01 06:20:34)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
For the time being…
Seems there's a pattern, https://bbs.archlinux.org/viewtopic.php?pid=2000511
Offline
For the time being…
Seems there's a pattern, https://bbs.archlinux.org/viewtopic.php?pid=2000511
It could be.
Until 1 or 2 months ago that wasn't happening.
Of course I am not using any nvidia or amd blob. I am not sure about the i915 driver (compiled or blob):
i915 3198976 54
i2c_algo_bit 16384 1 i915
intel_gtt 24576 1 i915
ttm 90112 1 i915
video 53248 1 i915
drm_kms_helper 331776 1 i915
cec 81920 2 drm_kms_helper,i915
drm 634880 16 drm_kms_helper,i915,ttm
But, at least in my case, it's not multitasking-related and only happens (seems to happen?) when I make use of the browsers.
Any other non-X process seems to go smooth (audio, network, console-based interaction).
How do I keep the compositor off, as it seems to be linked to the issue?
Last edited by 0BADC0DE (2021-11-01 07:24:17)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
kcmshell kwin (the kwin dialog in system settings) used to have a setting for that.
You've a different GPU but also the effect stack doesn't seem to matter.
If it's not because of the dualhead, I assume it's somewhere in the general GL context (and we can't test the xrender backend…)
Reminds me: https://bbs.archlinux.org/viewtopic.php … 6#p1991166
Offline
kcmshell kwin (the kwin dialog in system settings) used to have a setting for that.
I cannot find that program in any package.
Maybe is it System settings --> Display and Monitor --> Compositor?
My current setup is:
Enable compositor on startup: yes
Scale method: smooth
Rendering backend: OpenGL 2.0
Latency: balance
Tearing prevention: Automatic
Keep window thumbnails: Only for shown windows
Allow applications to block compositing: yes
Is it enough to flag first option to false?
You've a different GPU but also the effect stack doesn't seem to matter.
If it's not because of the dualhead, I assume it's somewhere in the general GL context (and we can't test the xrender backend…)Reminds me: https://bbs.archlinux.org/viewtopic.php … 6#p1991166
Unluckily my limited knowledge about the graphics stack doesn't allow me make full sense of that post.
Surely I only have Intel GPU , I have disabled all "effects" and I only have a "blinking cursor" and "task manager animation".
To my understanding and tests it's certainly related to X/KDE and that wasn't happening earlier.
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Is it enough to flag first option to false?
Yes.
Unluckily my limited knowledge about the graphics stack doesn't allow me make full sense of that post.
You just need to try to export that environment variable…
Offline
Is it enough to flag first option to false?
Yes.
Unluckily my limited knowledge about the graphics stack doesn't allow me make full sense of that post.
You just need to try to export that environment variable…
So your suggested workaround is to both disable the compositor and setup that variable?
Or maybe try one and then the second and maybe finally both?
Last edited by 0BADC0DE (2021-11-01 08:04:11)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
If the environment variable helps, you won't have to ditch the compositor.
Offline
I wonder if this is still a side effect of the broken iris GL driver? Not sure whether tigerlake ever had i965 support but maybe going with the old revert might help. I'll have to recheck on my skylake laptop though I might not be entirely up to date there.
Edit: Something else I'm seeing, I doubt the OGL2 path is well tested anymore, can you reproduce if you switch this to the OGL3.1 renderer?
Last edited by V1del (2021-11-01 08:43:16)
Offline
https://bbs.archlinux.org/viewtopic.php?pid=2000511 is on nvidia, so let's see…
Offline
What I see at the moment is that fonts show temporary artifacts during text updates in Konsole but not in borwsers (I tested Falkon and Vivaldi).
Anything else seems to be just fin.
Later today I will have to use heavier web apps (like MS Teams) that showed stuttering and lagging and will report back here.
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
https://bbs.archlinux.org/viewtopic.php?pid=2000511 is on nvidia, so let's see…
That user is reporting that "multitasking isn't working properly".
I think that's just his/her perception while I can tell for sure that multitasking is working. Just X/KDE stuff is slow.
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
What I see at the moment is that fonts show temporary artifacts during text updates in Konsole but not in borwsers (I tested Falkon and Vivaldi).
Anything else seems to be just fin.
Later today I will have to use heavier web apps (like MS Teams) that showed stuttering and lagging and will report back here.
Lagging is still there. I think it's lagging less, but still lagging.
During a call with Teams (web app) I could notice slow keyboard echo reponses, even thoug the loadavg was < 3 with 8 cores.
Switching to terminal console didn't show any keyabord lagging.
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Is this w/ KWIN_USE_BUFFER_AGE=0, it i965 GL driver OpenGL 3.0 or all of the above?
My last guess on the other thread was to try to disable vsync.
Offline
Is this w/ KWIN_USE_BUFFER_AGE=0, it i965 GL driver OpenGL 3.0 or all of the above?
My last guess on the other thread was to try to disable vsync.
I do have KWIN_USE_BUFFER_AGE=0.
kernel mod i915 is loaded.
OpenGL 3.0 ... should be YES as I see:
extra/mesa 21.2.4-1 [0B 100.26MiB] [Installed]
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
"i965" and that has nothing to do w/ the kernel module, see the link V1del posted: https://wiki.archlinux.org/title/Intel_ … ver_(i965)
Also the GL path can be configured in kwin compositor settings, that's not related to "I have mesa installed" at all.
Offline
"i965" and that has nothing to do w/ the kernel module, see the link V1del posted: https://wiki.archlinux.org/title/Intel_ … ver_(i965)
Also the GL path can be configured in kwin compositor settings, that's not related to "I have mesa installed" at all.
As I said, my knowledge about the graphic stack is rather limited...
OK. I setup MESA_LOADER_DRIVER_OVERRIDE=i965 and now I am going to test it.
I am still not sure where to setup that OpenGL 3.0. Is that in the systemsettings for the compositor?
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Is that in the systemsettings for the compositor?
Supposingly. I don't use KDE.
Offline