You are not logged in.

#1 2022-01-01 17:38:57

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Booting the ArchLinux installer from usb doesn't detect internal eMMC

Hello,

I am trying to install Archlinux on my Minix Z64. It's a Intel Baytrail device with 32GB eMMC inside.

To run the Installer USB disk I have to pass the "acpi=off" to grub boot parameter or I cannot see anything on the screen.

But when it booted, I cannot see the eMMC drive (/dev/mmc0...) and the fdisk -l lists only the USB and loop devices.

How can I do?

Thank you!

Offline

#2 2022-01-02 15:11:30

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

I am seeing that these kernel modules are not loaded at startup:

mmc_block
sdhci
sdhci_acpi

But on the installation shell, if I modprobe them, I cannot still see the eMMC drive on /dev/mmc...

Offline

#3 2022-01-03 14:15:41

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 9,795

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

looks like you created a bugreport for it , https://bugs.archlinux.org/task/73231

Does lsblk show it ?


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
Did you use the guided installer ? If yes, I can't help you.

(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#4 2022-01-03 14:45:53

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

lsblk

NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0 715.4M  1 loop /run/archiso/airootfs
sda      8:0    1  14.4G  0 disk 
├─sda1   8:1    1   790M  0 part /run/archiso/bootmnt
└─sda2   8:2    1    74M  0 part 

dmesg

[    0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[    0.000000] Linux version 5.15.12-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed, 29 Dec 2021 12:04:56 +0000
[    0.000000] Command line: initrd=\arch\boot\intel-ucode.img initrd=\arch\boot\amd-ucode.img initrd=\arch\boot\x86_64\initramfs-linux.img archisobasedir=arch archisolabel=ARCH_202201 acpi=off
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] signal: max sigframe size: 1440
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000079bbcfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079bbd000-0x000000007c3c2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c3c3000-0x000000007c3f2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007c3f3000-0x000000007c4a6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c754fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c755000-0x000000007c75efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c75f000-0x000000007c75ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c760000-0x000000007ccfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi: ESRT=0x7c3c2000 ACPI=0x7c3f2000 ACPI 2.0=0x7c3f2014 SMBIOS=0x7c709018 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 11/27/2014
[    0.000000] tsc: Detected 1333.333 MHz processor
[    0.000025] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000040] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000061] last_pfn = 0x7cd00 max_arch_pfn = 0x400000000
[    0.000123] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000422] total RAM covered: 1997M
[    0.001001] Found optimal setting for mtrr clean up
[    0.001004]  gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
[    0.011199] esrt: ESRT header is not in the memory map.
[    0.013578] Secure boot disabled
[    0.013583] RAMDISK: [mem 0x7278b000-0x764c6fff]
[    0.013669] No NUMA configuration found
[    0.013673] Faking a node at [mem 0x0000000000000000-0x000000007ccfffff]
[    0.013684] NODE_DATA(0) allocated [mem 0x79a02000-0x79a05fff]
[    0.013752] Zone ranges:
[    0.013756]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013765]   DMA32    [mem 0x0000000001000000-0x000000007ccfffff]
[    0.013772]   Normal   empty
[    0.013777]   Device   empty
[    0.013782] Movable zone start for each node
[    0.013785] Early memory node ranges
[    0.013787]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.013793]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.013798]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.013803]   node   0: [mem 0x0000000020200000-0x0000000079bbcfff]
[    0.013808]   node   0: [mem 0x000000007c755000-0x000000007c75efff]
[    0.013813]   node   0: [mem 0x000000007c760000-0x000000007ccfffff]
[    0.013819] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ccfffff]
[    0.013832] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013838] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013913] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.024124] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.024579] On node 0, zone DMA32: 11160 pages in unavailable ranges
[    0.024615] On node 0, zone DMA32: 1 pages in unavailable ranges
[    0.025135] On node 0, zone DMA32: 13056 pages in unavailable ranges
[    0.025145] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.025154] Reserving Intel graphics memory at [mem 0x7d000000-0x7effffff]
[    0.025220] TSC deadline timer available
[    0.025229] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.025234] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.025294] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.025304] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.025313] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.025317] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.025325] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.025333] PM: hibernation: Registered nosave memory: [mem 0x79bbd000-0x7c3c2fff]
[    0.025337] PM: hibernation: Registered nosave memory: [mem 0x7c3c3000-0x7c3f2fff]
[    0.025341] PM: hibernation: Registered nosave memory: [mem 0x7c3f3000-0x7c4a6fff]
[    0.025345] PM: hibernation: Registered nosave memory: [mem 0x7c4a7000-0x7c754fff]
[    0.025353] PM: hibernation: Registered nosave memory: [mem 0x7c75f000-0x7c75ffff]
[    0.025359] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.025366] Booting paravirtualized kernel on bare hardware
[    0.025373] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.038887] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:1 nr_node_ids:1
[    0.039613] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u2097152
[    0.039641] pcpu-alloc: s212992 r8192 d28672 u2097152 alloc=1*2097152
[    0.039652] pcpu-alloc: [0] 0 
[    0.039728] Built 1 zonelists, mobility grouping on.  Total pages: 491315
[    0.039738] Policy zone: DMA32
[    0.039743] Kernel command line: initrd=\arch\boot\intel-ucode.img initrd=\arch\boot\amd-ucode.img initrd=\arch\boot\x86_64\initramfs-linux.img archisobasedir=arch archisolabel=ARCH_202201 acpi=off
[    0.039991] Unknown kernel command line parameters "archisobasedir=arch archisolabel=ARCH_202201", will be passed to user space.
[    0.040608] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.040955] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.041681] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.058998] Memory: 1815692K/1997836K available (14344K kernel code, 2071K rwdata, 10792K rodata, 1864K init, 3836K bss, 181884K reserved, 0K cma-reserved)
[    0.059018] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[    0.059611] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.059657] Kernel/User page tables isolation: enabled
[    0.059708] ftrace: allocating 44301 entries in 174 pages
[    0.096420] ftrace: allocated 174 pages with 5 groups
[    0.096722] rcu: Preemptible hierarchical RCU implementation.
[    0.096728] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.096730] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=1.
[    0.096735] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.096739] 	Trampoline variant of Tasks RCU enabled.
[    0.096742] 	Rude variant of Tasks RCU enabled.
[    0.096744] 	Tracing variant of Tasks RCU enabled.
[    0.096747] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.096750] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.113900] NR_IRQS: 20736, nr_irqs: 32, preallocated irqs: 16
[    0.114507] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.114726] Console: colour dummy device 80x25
[    0.114768] printk: console [tty0] enabled
[    0.114841] APIC: ACPI MADT or MP tables are not detected
[    0.114871] APIC: Switch to virtual wire mode setup with no configuration
[    0.114876] Not enabling interrupt remapping due to skipped IO-APIC setup
[    0.114891] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.114906] Calibrating delay loop (skipped), value calculated using timer frequency.. 2667.77 BogoMIPS (lpj=4444443)
[    0.114917] pid_max: default: 32768 minimum: 301
[    0.118247] spurious 8259A interrupt: IRQ7.
[    0.119679] LSM: Security Framework initializing
[    0.119725] landlock: Up and running.
[    0.119733] Yama: becoming mindful.
[    0.119752] LSM support for eBPF active
[    0.119808] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.119829] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.120640] CPU0: Thermal monitoring enabled (TM1)
[    0.120679] process: using mwait in idle threads
[    0.120687] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.120693] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.120708] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.120715] Spectre V2 : Mitigation: Full generic retpoline
[    0.120718] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.120721] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.120727] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.120735] MDS: Mitigation: Clear CPU buffers
[    0.140496] Freeing SMP alternatives memory: 36K
[    0.140756] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1408
[    0.140765] smpboot: SMP disabled
[    0.141614] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.141643] ... version:                3
[    0.141646] ... bit width:              40
[    0.141649] ... generic registers:      2
[    0.141652] ... value mask:             000000ffffffffff
[    0.141656] ... max period:             0000007fffffffff
[    0.141659] ... fixed-purpose events:   3
[    0.141662] ... event mask:             0000000700000003
[    0.142038] rcu: Hierarchical SRCU implementation.
[    0.143709] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.143827] smp: Bringing up secondary CPUs ...
[    0.143832] smp: Brought up 1 node, 1 CPU
[    0.143838] smpboot: Max logical packages: 1
[    0.143841] smpboot: Total of 1 processors activated (2667.77 BogoMIPS)
[    0.144276] devtmpfs: initialized
[    0.144420] x86/mm: Memory block size: 128MB
[    0.145725] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.145736] ACPI: PM: Registering ACPI NVS region [mem 0x7c3f3000-0x7c4a6fff] (737280 bytes)
[    0.145917] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.145937] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.146082] pinctrl core: initialized pinctrl subsystem
[    0.146439] PM: RTC time: 14:36:34, date: 2022-01-03
[    0.146854] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.147254] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.147337] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.147416] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.147462] audit: initializing netlink subsys (disabled)
[    0.148065] thermal_sys: Registered thermal governor 'fair_share'
[    0.148072] thermal_sys: Registered thermal governor 'bang_bang'
[    0.148076] thermal_sys: Registered thermal governor 'step_wise'
[    0.148079] thermal_sys: Registered thermal governor 'user_space'
[    0.148082] thermal_sys: Registered thermal governor 'power_allocator'
[    0.148129] cpuidle: using governor ladder
[    0.148156] cpuidle: using governor menu
[    0.148610] PCI: Using configuration type 1 for base access
[    0.148955] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.151607] audit: type=2000 audit(1641220594.029:1): state=initialized audit_enabled=0 res=1
[    0.154042] Kprobes globally optimized
[    0.154486] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[    0.154497] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.160902] ACPI: Interpreter disabled.
[    0.160988] iommu: Default domain type: Translated 
[    0.160994] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.161093] vgaarb: loaded
[    0.161841] SCSI subsystem initialized
[    0.161988] libata version 3.00 loaded.
[    0.162060] usbcore: registered new interface driver usbfs
[    0.162091] usbcore: registered new interface driver hub
[    0.162116] usbcore: registered new device driver usb
[    0.162221] pps_core: LinuxPPS API ver. 1 registered
[    0.162227] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.162240] PTP clock support registered
[    0.162271] EDAC MC: Ver: 3.0.0
[    0.162529] Registered efivars operations
[    0.163303] NetLabel: Initializing
[    0.163308] NetLabel:  domain hash size = 128
[    0.163312] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.163375] NetLabel:  unlabeled traffic allowed by default
[    0.163394] PCI: Probing PCI hardware
[    0.163398] PCI: root bus 00: using default resources
[    0.163404] PCI: Probing PCI hardware (bus 00)
[    0.163471] PCI host bridge to bus 0000:00
[    0.163479] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.163489] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.163496] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.163518] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.163674] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.163694] pci 0000:00:02.0: reg 0x10: [mem 0x90400000-0x907fffff]
[    0.163711] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.163727] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.163750] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.163851] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.163858] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.163895] pci 0000:00:03.0: [8086:0f38] type 00 class 0x048000
[    0.163912] pci 0000:00:03.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.164095] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.164121] pci 0000:00:14.0: reg 0x10: [mem 0x90e00000-0x90e0ffff 64bit]
[    0.164191] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.164315] pci 0000:00:16.0: [8086:0f37] type 00 class 0x0c0380
[    0.164337] pci 0000:00:16.0: reg 0x10: [mem 0x90800000-0x909fffff]
[    0.164352] pci 0000:00:16.0: reg 0x14: [mem 0x90e2c000-0x90e2cfff]
[    0.164416] pci 0000:00:16.0: PME# supported from D0 D3hot
[    0.164543] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.164575] pci 0000:00:1a.0: reg 0x10: [mem 0x90d00000-0x90dfffff]
[    0.164595] pci 0000:00:1a.0: reg 0x14: [mem 0x90c00000-0x90cfffff]
[    0.164708] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.164837] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.165074] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.165235] PCI: pci_cache_line_size set to 64 bytes
[    0.165264] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.165272] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.165278] e820: reserve RAM buffer [mem 0x79bbd000-0x7bffffff]
[    0.165282] e820: reserve RAM buffer [mem 0x7c75f000-0x7fffffff]
[    0.165288] e820: reserve RAM buffer [mem 0x7cd00000-0x7fffffff]
[    0.168818] clocksource: Switched to clocksource tsc-early
[    0.208655] VFS: Disk quotas dquot_6.6.0
[    0.208703] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.208876] pnp: PnP ACPI: disabled
[    0.220053] NET: Registered PF_INET protocol family
[    0.220191] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.221471] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.221534] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.221715] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.221835] TCP: Hash tables configured (established 16384 bind 16384)
[    0.228374] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.228454] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.228498] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.228657] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.228678] NET: Registered PF_XDP protocol family
[    0.228700] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.228711] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.228736] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.228761] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.228820] PCI: CLS 0 bytes, default 64
[    0.228954] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13381e82524, max_idle_ns: 440795248224 ns
[    0.228996] clocksource: Switched to clocksource tsc
[    0.229067] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.229817] Trying to unpack rootfs image as initramfs...
[    0.239543] Initialise system trusted keyrings
[    0.239576] Key type blacklist registered
[    0.241799] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[    0.246408] zbud: loaded
[    0.301674] Key type asymmetric registered
[    0.301685] Asymmetric key parser 'x509' registered
[    0.301753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.301909] io scheduler mq-deadline registered
[    0.301915] io scheduler kyber registered
[    0.302049] io scheduler bfq registered
[    0.302509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.303240] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.303469] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.312435] Non-volatile memory driver v1.3
[    0.312444] Linux agpgart interface v0.103
[    0.312449] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.318733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.318753] ehci-pci: EHCI PCI platform driver
[    0.318786] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.318797] ohci-pci: OHCI PCI platform driver
[    0.318823] uhci_hcd: USB Universal Host Controller Interface driver
[    0.318957] usbcore: registered new interface driver usbserial_generic
[    0.318977] usbserial: USB Serial support registered for generic
[    0.319271] rtc_cmos rtc_cmos: registered as rtc0
[    0.319310] rtc_cmos rtc_cmos: setting system clock to 2022-01-03T14:36:34 UTC (1641220594)
[    0.319363] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    0.319508] intel_pstate: Intel P-state driver initializing
[    0.319776] ledtrig-cpu: registered to indicate activity on CPUs
[    0.320402] efifb: probing for efifb
[    0.320436] efifb: No BGRT, not showing boot graphics
[    0.320440] efifb: framebuffer at 0x80000000, using 1876k, total 1875k
[    0.320446] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.320451] efifb: scrolling: redraw
[    0.320454] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.320607] fbcon: Deferring console take-over
[    0.320613] fb0: EFI VGA frame buffer device
[    0.320666] hid: raw HID events driver (C) Jiri Kosina
[    0.320990] drop_monitor: Initializing network drop monitor service
[    0.321135] Initializing XFRM netlink socket
[    0.321416] NET: Registered PF_INET6 protocol family
[    0.961605] random: fast init done
[   14.588093] Freeing initrd memory: 62704K
[   14.607396] Segment Routing with IPv6
[   14.607405] RPL Segment Routing with IPv6
[   14.607434] In-situ OAM (IOAM) with IPv6
[   14.607494] NET: Registered PF_PACKET protocol family
[   14.607955] microcode: sig=0x30678, pf=0x2, revision=0x838
[   14.607967] microcode: Microcode Update Driver: v2.2.
[   14.607977] IPI shorthand broadcast: enabled
[   14.608014] sched_clock: Marking stable (14604358641, 569916)->(14605482189, -553632)
[   14.608388] registered taskstats version 1
[   14.608502] Loading compiled-in X.509 certificates
[   14.622628] Loaded X.509 cert 'Build time autogenerated kernel key: d2094633047b7eebd2131812d6ef772775a49f35'
[   14.622932] zswap: loaded using pool lz4/z3fold
[   14.623306] Key type ._fscrypt registered
[   14.623311] Key type .fscrypt registered
[   14.623314] Key type fscrypt-provisioning registered
[   14.624322] PM:   Magic number: 6:259:636
[   14.624681] RAS: Correctable Errors collector initialized.
[   14.638894] Freeing unused decrypted memory: 2036K
[   14.639887] Freeing unused kernel image (initmem) memory: 1864K
[   14.639963] Write protecting the kernel read-only data: 28672k
[   14.641358] Freeing unused kernel image (text/rodata gap) memory: 2036K
[   14.642235] Freeing unused kernel image (rodata/data gap) memory: 1496K
[   14.744369] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   14.744381] rodata_test: all tests were successful
[   14.744400] x86/mm: Checking user space page tables
[   14.843449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   14.843501] Run /init as init process
[   14.843505]   with arguments:
[   14.843508]     /init
[   14.843511]   with environment:
[   14.843513]     HOME=/
[   14.843516]     TERM=linux
[   14.843518]     archisobasedir=arch
[   14.843521]     archisolabel=ARCH_202201
[   14.879522] fbcon: Taking over console
[   14.879696] Console: switching to colour frame buffer device 100x37
[   15.501660] cryptd: max_cpu_qlen set to 1000
[   15.546982] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   15.547030] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   15.547048] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[   15.551265] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[   15.551737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[   15.551746] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   15.551752] usb usb1: Product: xHCI Host Controller
[   15.551756] usb usb1: Manufacturer: Linux 5.15.12-arch1-1 xhci-hcd
[   15.551760] usb usb1: SerialNumber: 0000:00:14.0
[   15.553000] hub 1-0:1.0: USB hub found
[   15.553033] hub 1-0:1.0: 6 ports detected
[   15.556124] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   15.556140] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[   15.556151] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[   15.556752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[   15.556761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   15.556766] usb usb2: Product: xHCI Host Controller
[   15.556771] usb usb2: Manufacturer: Linux 5.15.12-arch1-1 xhci-hcd
[   15.556775] usb usb2: SerialNumber: 0000:00:14.0
[   15.557550] hub 2-0:1.0: USB hub found
[   15.557579] hub 2-0:1.0: 1 port detected
[   15.618883] SSE version of gcm_enc/dec engaged.
[   15.804960] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   15.903052] i915 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   15.903269] checking generic (80000000 1d5000) vs hw (90400000 400000)
[   15.903276] checking generic (80000000 1d5000) vs hw (80000000 10000000)
[   15.903280] fb0: switching to i915 from EFI VGA
[   15.904205] Console: switching to colour dummy device 80x25
[   15.904696] i915 0000:00:02.0: vgaarb: deactivate vga console
[   15.930556] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[   15.930931] i915 0000:00:02.0: [drm] HDaudio controller not detected, using LPE audio instead
[   15.946248] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[   15.946263] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   15.946269] usb 1-1: Product: USB2.0 Hub
[   15.947164] hub 1-1:1.0: USB hub found
[   15.947457] hub 1-1:1.0: 4 ports detected
[   16.071628] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[   16.145014] fbcon: i915drmfb (fb0) is primary device
[   16.195265] Console: switching to colour frame buffer device 240x67
[   16.213864] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.00
[   16.213873] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   16.213878] usb 1-2: Product: USB Receiver
[   16.213881] usb 1-2: Manufacturer: Logitech
[   16.242819] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[   16.284995] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
[   16.304238] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input0
[   16.361044] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[   16.365243] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input1
[   16.365549] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input2
[   16.376066] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[   16.376079] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   16.376086] usb 1-1.1: Product: USB 10/100 LAN
[   16.376091] usb 1-1.1: Manufacturer: Realtek
[   16.376096] usb 1-1.1: SerialNumber: 1000003200C8
[   16.421882] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input3
[   16.422822] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[   16.422957] usbcore: registered new interface driver usbhid
[   16.422963] usbhid: USB HID core driver
[   16.444404] usbcore: registered new interface driver r8152
[   16.448317] usb 1-1.2: new high-speed USB device number 5 using xhci_hcd
[   16.514417] usbcore: registered new interface driver cdc_ether
[   16.528525] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[   16.547898] usb 1-1.2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[   16.547909] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   16.547915] usb 1-1.2: Product: DataTraveler 3.0
[   16.547920] usb 1-1.2: Manufacturer: Kingston
[   16.547924] usb 1-1.2: SerialNumber: E839354C74CEF360673D0CAF
[   16.583110] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   16.584258] scsi host0: usb-storage 1-1.2:1.0
[   16.586451] usbcore: registered new interface driver usb-storage
[   16.605851] usbcore: registered new interface driver uas
[   16.611900] usb 1-1.1: reset high-speed USB device number 4 using xhci_hcd
[   16.627494] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[   16.684148] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
[   16.685155] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input6
[   16.685729] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-2/input1:1
[   16.686110] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[   16.686803] input: Logitech Wireless Mouse PID:4038 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4038.0004/input/input11
[   16.686979] hid-generic 0003:046D:4038.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4038] on usb-0000:00:14.0-2/input1:2
[   16.729281] r8152 1-1.1:1.0: skip request firmware
[   16.755758] r8152 1-1.1:1.0 eth0: v1.12.12
[   16.786648] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input15
[   16.789266] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-2/input1:1
[   16.802732] input: Logitech Wireless Mouse PID:4038 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4038.0004/input/input16
[   16.802934] logitech-hidpp-device 0003:046D:4038.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4038] on usb-0000:00:14.0-2/input1:2
[   17.609295] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 3.0      PQ: 0 ANSI: 6
[   17.611648] sd 0:0:0:0: [sda] 30218842 512-byte logical blocks: (15.5 GB/14.4 GiB)
[   17.611895] sd 0:0:0:0: [sda] Write Protect is off
[   17.611905] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[   17.612138] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   17.615071]  sda: sda1 sda2
[   17.616357] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   18.468084] ISO 9660 Extensions: Microsoft Joliet Level 3
[   18.469217] ISO 9660 Extensions: RRIP_1991A
[   18.505881] loop: module loaded
[   18.507827] loop0: detected capacity change from 0 to 1465200
[   18.630227] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   18.681358] overlayfs: "xino" feature enabled using 2 upper inode bits.
[   19.067676] random: crng init done
[   22.617325] systemd[1]: systemd 250-4-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[   22.631906] systemd[1]: Detected architecture x86-64.
[   22.741559] systemd[1]: Hostname set to <archiso>.
[   22.744752] systemd[1]: Initializing machine ID from random generator.
[   23.882758] systemd-gpt-auto-generator[202]: EFI loader partition unknown, exiting.
[   23.882776] systemd-gpt-auto-generator[202]: (The boot loader did not set EFI variable LoaderDevicePartUUID.)
[   27.722809] systemd[191]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[   28.097062] systemd[1]: Queued start job for default target Graphical Interface.
[   28.100892] systemd[1]: Created slice Slice /system/getty.
[   28.102952] systemd[1]: Created slice Slice /system/modprobe.
[   28.104438] systemd[1]: Created slice User and Session Slice.
[   28.105137] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   28.105719] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   28.106663] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   28.107112] systemd[1]: Reached target Local Encrypted Volumes.
[   28.107509] systemd[1]: Reached target Local Integrity Protected Volumes.
[   28.107935] systemd[1]: Reached target Path Units.
[   28.108356] systemd[1]: Reached target Remote File Systems.
[   28.108705] systemd[1]: Reached target Slice Units.
[   28.109064] systemd[1]: Reached target Swaps.
[   28.109430] systemd[1]: Reached target Local Verity Protected Volumes.
[   28.110067] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   28.113378] systemd[1]: Listening on LVM2 poll daemon socket.
[   28.120035] systemd[1]: Listening on Process Core Dump Socket.
[   28.121796] systemd[1]: Listening on Journal Audit Socket.
[   28.122698] systemd[1]: Listening on Journal Socket (/dev/log).
[   28.123584] systemd[1]: Listening on Journal Socket.
[   28.124621] systemd[1]: Listening on Network Service Netlink Socket.
[   28.129326] systemd[1]: Listening on udev Control Socket.
[   28.130147] systemd[1]: Listening on udev Kernel Socket.
[   28.133852] systemd[1]: Mounting Huge Pages File System...
[   28.138188] systemd[1]: Mounting POSIX Message Queue File System...
[   28.149719] systemd[1]: Mounting Kernel Debug File System...
[   28.155307] systemd[1]: Mounting Kernel Trace File System...
[   28.237265] systemd[1]: Mounting Temporary Directory /tmp...
[   28.245813] systemd[1]: Starting Create List of Static Device Nodes...
[   28.255431] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   28.292905] systemd[1]: Starting Load Kernel Module configfs...
[   28.309923] systemd[1]: Starting Load Kernel Module drm...
[   28.338772] systemd[1]: Starting Load Kernel Module fuse...
[   28.352857] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
[   28.368936] systemd[1]: Starting Journal Service...
[   28.525905] systemd[1]: Starting Load Kernel Modules...
[   28.540859] systemd[1]: Starting Remount Root and Kernel File Systems...
[   28.601914] fuse: init (API version 7.34)
[   28.605762] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[   28.609192] systemd[1]: Starting Coldplug All udev Devices...
[   28.621195] systemd[1]: Mounted Huge Pages File System.
[   28.622056] systemd[1]: Mounted POSIX Message Queue File System.
[   28.622767] systemd[1]: Mounted Kernel Debug File System.
[   28.623453] systemd[1]: Mounted Kernel Trace File System.
[   28.624134] systemd[1]: Mounted Temporary Directory /tmp.
[   28.688535] systemd[1]: Finished Create List of Static Device Nodes.
[   28.690192] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   28.696136] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   28.696727] systemd[1]: Finished Load Kernel Module configfs.
[   28.702411] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   28.702983] systemd[1]: Finished Load Kernel Module drm.
[   28.709132] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   28.709705] systemd[1]: Finished Load Kernel Module fuse.
[   28.721931] systemd[1]: Mounting FUSE Control File System...
[   28.745616] systemd[1]: Mounting Kernel Configuration File System...
[   28.863149] systemd[1]: Finished Remount Root and Kernel File Systems.
[   28.870496] systemd[1]: Mounted FUSE Control File System.
[   28.876838] systemd[1]: Mounted Kernel Configuration File System.
[   28.935278] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[   28.942593] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed.
[   28.949106] systemd[1]: Starting Load/Save Random Seed...
[   29.022125] systemd[1]: Starting Create System Users...
[   29.333646] Asymmetric key parser 'pkcs8' registered
[   29.336195] systemd[1]: Finished Load Kernel Modules.
[   29.345466] audit: type=1130 audit(1641220623.523:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.359708] systemd[1]: Starting Apply Kernel Variables...
[   29.612882] systemd[1]: Finished Load/Save Random Seed.
[   29.619683] audit: type=1130 audit(1641220623.796:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.622082] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[   29.861295] systemd[1]: Started Journal Service.
[   29.864569] audit: type=1130 audit(1641220624.040:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.970960] audit: type=1130 audit(1641220624.146:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.113021] systemd-journald[230]: Received client request to flush runtime journal.
[   30.126885] audit: type=1130 audit(1641220624.303:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.137174] audit: type=1130 audit(1641220624.313:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.144837] audit: type=1130 audit(1641220624.320:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.414405] audit: type=1130 audit(1641220624.590:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.439996] audit: type=1334 audit(1641220624.616:10): prog-id=14 op=LOAD
[   30.442262] audit: type=1334 audit(1641220624.620:11): prog-id=15 op=LOAD
[   39.332962] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   39.466144] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   39.918539] kauditd_printk_skb: 8 callbacks suppressed
[   39.918546] audit: type=1130 audit(1641220634.096:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.991244] audit: type=1334 audit(1641220634.166:21): prog-id=18 op=LOAD
[   46.910482] audit: type=1130 audit(1641220641.086:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-resolved comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   48.637962] input: PC Speaker as /devices/platform/pcspkr/input/input17
[   57.173889] intel_soc_dts_thermal: request_threaded_irq ret -22
[   57.755846] intel_rapl_common: Found RAPL domain package
[   57.755855] intel_rapl_common: Found RAPL domain core
[   58.905755] mei_txe 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   58.912146] mc: Linux media interface: v0.10
[   59.115640] iTCO_vendor_support: vendor-support=0
[   59.314491] videodev: Linux video capture interface: v2.00
[   59.428840] iTCO_wdt iTCO_wdt.0.auto: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   59.433381] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0)
[   59.613924] intel-spi intel-spi: w25q64dw (8192 Kbytes)
[   59.768370] Creating 1 MTD partitions on "intel-spi":
[   59.768387] 0x000000000000-0x000000800000 : "BIOS"
[   59.868482] atomisp_gmin_platform: module is from the staging directory, the quality is unknown, you have been warned.
[   59.916752] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input18
[   59.917434] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input19
[   60.334654] atomisp: module is from the staging directory, the quality is unknown, you have been warned.

[   60.405203] **********************************************************
[   60.405205] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[   60.405208] **                                                      **
[   60.405209] ** trace_printk() being used. Allocating extra memory.  **
[   60.405211] **                                                      **
[   60.405213] ** This means that this is a DEBUG kernel and it is     **
[   60.405215] ** unsafe for production use.                           **
[   60.405217] **                                                      **
[   60.405219] ** If you see this message and you are not debugging    **
[   60.405221] ** the kernel, report this immediately to your vendor!  **
[   60.405223] **                                                      **
[   60.405224] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[   60.405226] **********************************************************
[   60.408111] atomisp-isp2 0000:00:03.0: Support for Baytrail (ISP2400) was disabled at compile time
[   63.270961] dwc3-pci 0000:00:16.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   63.275032] dwc3-pci 0000:00:16.0: cannot find GPIO chip INT33FC:02, deferring
[   66.589339] mousedev: PS/2 mouse device common for all mice
[   68.396810] r8152 1-1.1:1.0 enp0s20u1u1: renamed from eth0
[   68.523060] audit: type=1130 audit(1641220662.700:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   68.661388] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u1u1: link becomes ready
[   68.665147] r8152 1-1.1:1.0 enp0s20u1u1: carrier on
[   70.976156] audit: type=1130 audit(1641220665.153:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   74.696819] audit: type=1130 audit(1641220668.873:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   74.797599] audit: type=1130 audit(1641220668.973:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   74.896043] audit: type=1130 audit(1641220669.073:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   74.900092] audit: type=1334 audit(1641220669.076:28): prog-id=19 op=LOAD
[   75.159957] audit: type=1334 audit(1641220669.336:29): prog-id=20 op=LOAD
[   75.160696] audit: type=1334 audit(1641220669.336:30): prog-id=21 op=LOAD
[   75.161009] audit: type=1334 audit(1641220669.336:31): prog-id=22 op=LOAD
[   75.203586] audit: type=1130 audit(1641220669.380:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   77.110377] NET: Registered PF_ALG protocol family
[   77.747475] audit: type=1130 audit(1641220671.923:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.024033] audit: type=1130 audit(1641220673.200:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iwd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   86.289088] kauditd_printk_skb: 3 callbacks suppressed
[   86.289095] audit: type=1101 audit(1641220680.466:38): pid=391 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[   86.293082] audit: type=1103 audit(1641220680.470:39): pid=391 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[   86.293647] audit: type=1006 audit(1641220680.470:40): pid=391 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=1 res=1
[   86.293754] audit: type=1300 audit(1641220680.470:40): arch=c000003e syscall=1 success=yes exit=1 a0=4 a1=7ffdfd13ba10 a2=1 a3=0 items=0 ppid=1 pid=391 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty1 ses=1 comm="login" exe="/usr/bin/login" key=(null)
[   86.294260] audit: type=1327 audit(1641220680.470:40): proctitle=2F62696E2F6C6F67696E002D66
[   87.004625] audit: type=1130 audit(1641220681.180:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   87.189508] audit: type=1101 audit(1641220681.366:42): pid=421 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   87.193026] audit: type=1103 audit(1641220681.370:43): pid=421 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   87.193541] audit: type=1006 audit(1641220681.370:44): pid=421 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
[   87.193647] audit: type=1300 audit(1641220681.370:44): arch=c000003e syscall=1 success=yes exit=1 a0=9 a1=7fff1fb2d4f0 a2=1 a3=0 items=0 ppid=1 pid=421 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
[   93.211290] kauditd_printk_skb: 13 callbacks suppressed
[   93.211297] audit: type=1130 audit(1641220687.386:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshdgenkeys comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   93.231908] audit: type=1130 audit(1641220687.410:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  101.236728] audit: type=1334 audit(1641220695.413:55): prog-id=26 op=LOAD
[  101.238958] audit: type=1334 audit(1641220695.416:56): prog-id=27 op=LOAD
[  101.241921] audit: type=1334 audit(1641220695.420:57): prog-id=28 op=LOAD
[  101.952702] audit: type=1130 audit(1641220696.130:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  112.659113] audit: type=1130 audit(1641220706.833:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  114.328677] NET: Registered PF_QIPCRTR protocol family
[  114.339636] audit: type=1130 audit(1641220708.516:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ModemManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  117.344192] logitech-hidpp-device 0003:046D:4038.0004: HID++ 2.0 device connected.
[  126.826199] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
[  132.000109] audit: type=1131 audit(1641220726.176:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  132.028482] audit: type=1334 audit(1641220726.206:62): prog-id=0 op=UNLOAD
[  132.028499] audit: type=1334 audit(1641220726.206:63): prog-id=0 op=UNLOAD
[  132.028509] audit: type=1334 audit(1641220726.206:64): prog-id=0 op=UNLOAD
[  159.123090] audit: type=1130 audit(1641220753.300:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=reflector comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  159.123390] audit: type=1131 audit(1641220753.300:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=reflector comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  159.128624] audit: type=1334 audit(1641220753.306:67): prog-id=0 op=UNLOAD

Offline

#5 2022-01-03 14:46:29

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

note: Fedora 35 and Ubuntu 20.04 installers can see the device

Offline

#6 2022-01-03 16:00:02

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 9,795

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

[   60.408111] atomisp-isp2 0000:00:03.0: Support for Baytrail (ISP2400) was disabled at compile time

There are intel Atom System-on-Chip that require 32-bit efi firmware although they're 64-bit processors .
The bootloader used on archlinux installation iso doesn't support that .

Check https://wiki.archlinux.org/title/Unifie … re_bitness


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
Did you use the guided installer ? If yes, I can't help you.

(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#7 2022-01-03 16:07:50

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 6,217

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

@Lone_Wolf: the bug report now states the probable cause:

foxboron wrote:

Probably missing this backport from efivar. It was pointed out in #archlinux-releng a day or two ago.

https://github.com/rhboot/efivar/commit … 82d1ccdd33

Offline

#8 2022-01-03 17:10:31

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

Lone_Wolf wrote:
[   60.408111] atomisp-isp2 0000:00:03.0: Support for Baytrail (ISP2400) was disabled at compile time

There are intel Atom System-on-Chip that require 32-bit efi firmware although they're 64-bit processors .
The bootloader used on archlinux installation iso doesn't support that .

Check https://wiki.archlinux.org/title/Unifie … re_bitness

Yes, but my Baytrail system was the Android version and not Windows.
It has NO problems installing Ubuntu or Fedora 64 bit with the standard 64 bit medium

Offline

#9 2022-01-03 17:24:09

progandy
Member
Registered: 2012-05-17
Posts: 4,766

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

Do you boot Ubuntu or Fedora with acpi=off as well? If not, does that change the visibility of the eMMC?

Last edited by progandy (2022-01-03 17:26:03)


| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |

Offline

#10 2022-01-03 19:00:26

trapanator
Member
From: Italy
Registered: 2009-08-10
Posts: 150

Re: Booting the ArchLinux installer from usb doesn't detect internal eMMC

UPDATE from bug report: instead of using acpi=off, I can use `nolapic` in boot parameter.

progandy wrote:

Do you boot Ubuntu or Fedora with acpi=off as well? If not, does that change the visibility of the eMMC?

- Ubuntu 20.04 installer: all OK without acpi=off
- Fedora 35: installer OK without acpi=off,  BUT after reboot to installed system, the screen is black. So I think I should put the nolapci here, too.

Offline

Board footer

Powered by FluxBB