You are not logged in.

Pages: 1

#1 2021-12-26 02:28:04

train__wreck
Member
Registered: 2020-08-23
Posts: 32

Following wiki for tigervnc + LXDE, server starts then stops

I have Arch running on a headless Intel NUC. I am following the wiki for tigervnc. I am trying to get it to use the LXDE desktop. I installed tigervnc and all of the packages from the "LXDE" group. Basically, when I start the systemd service ("systemctl start vncserver@:1"), it immediately stops. My username is "wil", and I ran the "vncpasswd" command to set a password.

vncserver.users:

:1=wil

~/.vnc/config:

session=LXDE
geometry=1920x1080
localhost
alwaysshared

Output of HOSTNAME.log:

Using desktop session LXDE

New '1176-Server:1 (wil)' desktop is 1176-Server:1

Starting desktop session LXDE


Xvnc TigerVNC 1.12.0 - built Nov 13 2021 18:03:45
Copyright (C) 1999-2021 TigerVNC Team and many others (see README.rst)
See https://www.tigervnc.org for information on TigerVNC.
Underlying X server release 12009000, The X.Org Foundation


Sat Dec 25 20:20:47 2021
 vncext:      VNC extension running!
 vncext:      Listening for VNC connections on local interface(s), port 5901
 vncext:      created VNC server for screen 0
xinit: XFree86_VT property unexpectedly has 0 items instead of 1
xinit: connection to X server lost

waiting for X server to shut down  ComparingUpdateTracker: 0 pixels in / 0 pixels out
 ComparingUpdateTracker: (1:-nan ratio)

What's going on?

Offline

#2 2022-01-19 03:52:26

train__wreck
Member
Registered: 2020-08-23
Posts: 32

Re: Following wiki for tigervnc + LXDE, server starts then stops

I'm still having this problem, still haven't been able to successfully get VNC running. Does anyone have any ideas?

Offline

#3 2022-01-19 08:00:59

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,344

Re: Following wiki for tigervnc + LXDE, server starts then stops

running on a headless Intel NUC

https://wiki.archlinux.org/title/Xorg#M … figuration ?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#4 2022-01-19 10:22:27

train__wreck
Member
Registered: 2020-08-23
Posts: 32

Re: Following wiki for tigervnc + LXDE, server starts then stops

seth wrote:

I did that. Still getting the same problem.

Offline

#5 2022-01-19 12:45:57

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,344

Re: Following wiki for tigervnc + LXDE, server starts then stops

Please post the xorg log.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2022-01-22 04:15:59

train__wreck
Member
Registered: 2020-08-23
Posts: 32

Re: Following wiki for tigervnc + LXDE, server starts then stops

X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[     4.378] Current Operating System: Linux 1176-Server 5.16.2-arch1-1 #1 SMP PREEMPT Thu, 20 Jan 2022 16:18:29 +0000 x86_64
[     4.378] Kernel command line: root=UUID=ae8f7656-427f-4fba-9abb-5bf1c610e733 rw initrd=\intel-ucode.img initrd=\initramfs-linux.img audit=0
[     4.378]  
[     4.378] Current version of pixman: 0.40.0
[     4.378]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     4.378] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.379] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 21 21:50:09 2022
[     4.383] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     4.383] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.384] (==) No Layout section.  Using the first Screen section.
[     4.384] (**) |-->Screen "dummy_screen" (0)
[     4.384] (**) |   |-->Monitor "dummy_monitor"
[     4.385] (**) |   |-->Device "dummy_card"
[     4.386] (==) Automatically adding devices
[     4.386] (==) Automatically enabling devices
[     4.386] (==) Automatically adding GPU devices
[     4.386] (==) Automatically binding GPU devices
[     4.386] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.387] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     4.387]    Entry deleted from font path.
[     4.387] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     4.387]    Entry deleted from font path.
[     4.388] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     4.388]    Entry deleted from font path.
[     4.388] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     4.388]    Entry deleted from font path.
[     4.392] (==) FontPath set to:
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[     4.392] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.392] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.392] (II) Module ABI versions:
[     4.392]    X.Org ANSI C Emulation: 0.4
[     4.392]    X.Org Video Driver: 25.2
[     4.392]    X.Org XInput driver : 24.4
[     4.393]    X.Org Server Extension : 10.0
[     4.394] (++) using VT number 1

[     4.394] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.396] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.396] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     4.401] (--) PCI:*(0@0:2:0) 8086:5916:8086:2068 rev 2, Mem @ 0xdb000000/16777216, 0xb8000000/134217728, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     4.402] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     4.402] (II) LoadModule: "glx"
[     4.407] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.429] (II) Module glx: vendor="X.Org Foundation"
[     4.429]    compiled for 1.21.1.3, module version = 1.0.0
[     4.429]    ABI class: X.Org Server Extension, version 10.0
[     4.429] (II) LoadModule: "dummy"
[     4.429] (II) Loading /usr/lib/xorg/modules/drivers/dummy_drv.so
[     4.430] (II) Module dummy: vendor="X.Org Foundation"
[     4.430]    compiled for 1.21.1.1, module version = 0.3.8
[     4.430]    Module class: X.Org Video Driver
[     4.430]    ABI class: X.Org Video Driver, version 25.2
[     4.430] (II) DUMMY: Driver for Dummy chipsets: dummy
[     4.430] (WW) Falling back to old probe method for dummy
[     4.430] (II) DUMMY(0): Chipset is a DUMMY
[     4.430] (==) DUMMY(0): Depth 24, (--) framebuffer bpp 32
[     4.430] (==) DUMMY(0): RGB weight 888
[     4.430] (==) DUMMY(0): Default visual is TrueColor
[     4.430] (==) DUMMY(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.430] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[     4.430] (**) DUMMY(0): VideoRAM: 256000 kByte
[     4.430] (--) DUMMY(0): Max Clock: 300000 kHz
[     4.430] (II) DUMMY(0): dummy_monitor: Using hsync range of 28.00-80.00 kHz
[     4.430] (II) DUMMY(0): dummy_monitor: Using vrefresh range of 48.00-75.00 Hz
[     4.430] (WW) DUMMY(0): Unable to estimate virtual size
[     4.430] (II) DUMMY(0): Clock range:  11.00 to 300.00 MHz
[     4.430] (II) DUMMY(0): Not using default mode "640x350" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "320x175" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "640x400" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "320x200" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "720x400" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "360x200" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "640x480" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "320x240" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "800x600" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "400x300" (vrefresh out of range)
[     4.430] (II) DUMMY(0): Not using default mode "1024x768i" (vrefresh out of range)
[     4.431] (II) DUMMY(0): Not using default mode "512x384i" (vrefresh out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1024x768" (vrefresh out of range)
[     4.431] (II) DUMMY(0): Not using default mode "512x384" (vrefresh out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1280x960" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "640x480" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1280x1024" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "640x512" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1792x1344" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "896x672" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1792x1344" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "896x672" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1856x1392" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "928x696" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1856x1392" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "928x696" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1920x1440" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1920x1440" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1400x1050" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "700x525" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2048x1536" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "640x360" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "640x360" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "720x405" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "720x405" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "360x202" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "864x486" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "1600x900" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "2048x1152" (monitor doesn't support reduced blanking)
[     4.431] (II) DUMMY(0): Not using default mode "2560x1440" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "1280x720" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1280x720" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2880x1620" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1440x810" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "2880x1620" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1440x810" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "3200x1800" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1600x900" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "3200x1800" (bad mode clock/interlace/doublescan)
[     4.431] (II) DUMMY(0): Not using default mode "1600x900" (hsync out of range)
[     4.431] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "4096x2304" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "4096x2304" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "5120x2880" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "5120x2880" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "15360x8640" (insufficient memory for mode)
[     4.432] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "15360x8640" (insufficient memory for mode)
[     4.432] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "1280x800" (monitor doesn't support reduced blanking)
[     4.432] (II) DUMMY(0): Not using default mode "1400x900" (monitor doesn't support reduced blanking)
[     4.432] (II) DUMMY(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
[     4.432] (II) DUMMY(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
[     4.432] (II) DUMMY(0): Not using default mode "2560x1600" (hsync out of range)
[     4.432] (II) DUMMY(0): Not using default mode "1280x800" (hsync out of range)
[     4.432] (II) DUMMY(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[     4.432] (II) DUMMY(0): Not using default mode "1280x800" (hsync out of range)
[     4.433] (II) DUMMY(0): Virtual size is 2048x1200 (pitch 2048)
[     4.433] (**) DUMMY(0): *Default mode "2048x1152": 197.0 MHz, 71.6 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1920x1200": 193.2 MHz, 74.6 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz zd)
[     4.433] (**) DUMMY(0): *Mode "1920x1080": 172.8 MHz, 67.1 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 (67.1 kHz z)
[     4.433] (**) DUMMY(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1600x900": 118.2 MHz, 56.0 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1400x900": 103.5 MHz, 56.0 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1368x768": 85.2 MHz, 47.8 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 59.8 Hz
[     4.433] (II) DUMMY(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1280x720": 74.5 MHz, 44.8 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[     4.433] (II) DUMMY(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[     4.433] (II) DUMMY(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x576": 78.4 MHz, 71.0 kHz, 60.0 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x576": 98.5 MHz, 71.6 kHz, 60.0 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[     4.433] (II) DUMMY(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "960x600": 77.0 MHz, 74.0 kHz, 60.0 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "960x600": 96.6 MHz, 74.6 kHz, 59.9 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[     4.433] (II) DUMMY(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "960x540": 69.2 MHz, 66.6 kHz, 60.0 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "960x540": 86.5 MHz, 67.2 kHz, 60.0 Hz (D)
[     4.433] (II) DUMMY(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz zd)
[     4.433] (**) DUMMY(0): *Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[     4.433] (II) DUMMY(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[     4.434] (II) DUMMY(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[     4.434] (II) DUMMY(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[     4.434] (II) DUMMY(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[     4.434] (II) DUMMY(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "864x486": 32.5 MHz, 30.3 kHz, 59.9 Hz
[     4.434] (II) DUMMY(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "800x450": 59.1 MHz, 56.0 kHz, 59.9 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "700x450": 51.8 MHz, 56.0 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[     4.434] (II) DUMMY(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[     4.434] (II) DUMMY(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[     4.434] (II) DUMMY(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "684x384": 42.6 MHz, 47.8 kHz, 59.9 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x400": 35.5 MHz, 49.3 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x400": 41.8 MHz, 49.7 kHz, 59.9 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 59.9 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "512x288": 23.2 MHz, 35.9 kHz, 60.0 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz zd)
[     4.434] (**) DUMMY(0): *Default mode "512x288": 21.0 MHz, 35.5 kHz, 59.9 Hz (D)
[     4.434] (II) DUMMY(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "480x270": 18.6 MHz, 33.3 kHz, 59.8 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "480x270": 20.4 MHz, 33.5 kHz, 59.6 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "432x243": 16.2 MHz, 30.3 kHz, 59.9 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "432x243": 15.2 MHz, 29.8 kHz, 59.6 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz zd)
[     4.435] (**) DUMMY(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[     4.435] (II) DUMMY(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[     4.435] (==) DUMMY(0): DPI set to (96, 96)
[     4.435] (II) Loading sub module "fb"
[     4.435] (II) LoadModule: "fb"
[     4.435] (II) Module "fb" already built-in
[     4.435] (II) Loading sub module "ramdac"
[     4.435] (II) LoadModule: "ramdac"
[     4.435] (II) Module "ramdac" already built-in
[     4.437] (II) DUMMY(0): Using 30800 scanlines of offscreen memory 
[     4.437] (==) DUMMY(0): Backing store enabled
[     4.437] (==) DUMMY(0): Silken mouse enabled
[     4.438] (II) Initializing extension Generic Event Extension
[     4.438] (II) Initializing extension SHAPE
[     4.439] (II) Initializing extension MIT-SHM
[     4.439] (II) Initializing extension XInputExtension
[     4.441] (II) Initializing extension XTEST
[     4.441] (II) Initializing extension BIG-REQUESTS
[     4.441] (II) Initializing extension SYNC
[     4.442] (II) Initializing extension XKEYBOARD
[     4.442] (II) Initializing extension XC-MISC
[     4.442] (II) Initializing extension SECURITY
[     4.442] (II) Initializing extension XFIXES
[     4.443] (II) Initializing extension RENDER
[     4.443] (II) Initializing extension RANDR
[     4.444] (II) Initializing extension COMPOSITE
[     4.444] (II) Initializing extension DAMAGE
[     4.444] (II) Initializing extension MIT-SCREEN-SAVER
[     4.444] (II) Initializing extension DOUBLE-BUFFER
[     4.445] (II) Initializing extension RECORD
[     4.445] (II) Initializing extension DPMS
[     4.445] (II) Initializing extension Present
[     4.445] (II) Initializing extension DRI3
[     4.445] (II) Initializing extension X-Resource
[     4.446] (II) Initializing extension XVideo
[     4.446] (II) Initializing extension XVideo-MotionCompensation
[     4.446] (II) Initializing extension GLX
[     4.446] (II) AIGLX: Screen 0 is not DRI2 capable
[     4.839] (II) IGLX: Loaded and initialized swrast
[     4.839] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     4.839] (II) Initializing extension XFree86-VidModeExtension
[     4.839] (II) Initializing extension XFree86-DGA
[     4.839] (II) Initializing extension XFree86-DRI
[     4.839] (II) Initializing extension DRI2
[     4.942] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.942] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.942] (II) LoadModule: "libinput"
[     4.942] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.947] (II) Module libinput: vendor="X.Org Foundation"
[     4.947]    compiled for 1.21.1, module version = 1.2.0
[     4.947]    Module class: X.Org XInput Driver
[     4.947]    ABI class: X.Org XInput driver, version 24.4
[     4.947] (II) Using input driver 'libinput' for 'Power Button'
[     4.947] (**) Power Button: always reports core events
[     4.947] (**) Option "Device" "/dev/input/event2"
[     4.947] (**) Option "_source" "server/udev"
[     4.954] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     4.954] (II) event2  - Power Button: device is a keyboard
[     4.954] (II) event2  - Power Button: device removed
[     4.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     4.997] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.998] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     4.998] (II) event2  - Power Button: device is a keyboard
[     4.999] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     4.999] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.999] (II) Using input driver 'libinput' for 'Video Bus'
[     4.999] (**) Video Bus: always reports core events
[     4.999] (**) Option "Device" "/dev/input/event3"
[     4.999] (**) Option "_source" "server/udev"
[     5.000] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     5.000] (II) event3  - Video Bus: device is a keyboard
[     5.000] (II) event3  - Video Bus: device removed
[     5.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[     5.051] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.052] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     5.052] (II) event3  - Video Bus: device is a keyboard
[     5.053] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.053] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.053] (II) Using input driver 'libinput' for 'Power Button'
[     5.053] (**) Power Button: always reports core events
[     5.053] (**) Option "Device" "/dev/input/event1"
[     5.053] (**) Option "_source" "server/udev"
[     5.053] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.053] (II) event1  - Power Button: device is a keyboard
[     5.053] (II) event1  - Power Button: device removed
[     5.091] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     5.091] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.092] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.092] (II) event1  - Power Button: device is a keyboard
[     5.093] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     5.093] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     5.093] (II) Using input driver 'libinput' for 'Sleep Button'
[     5.093] (**) Sleep Button: always reports core events
[     5.093] (**) Option "Device" "/dev/input/event0"
[     5.093] (**) Option "_source" "server/udev"
[     5.094] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     5.094] (II) event0  - Sleep Button: device is a keyboard
[     5.094] (II) event0  - Sleep Button: device removed
[     5.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     5.117] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     5.118] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     5.119] (II) event0  - Sleep Button: device is a keyboard
[     5.119] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event10)
[     5.119] (II) No input driver specified, ignoring this device.
[     5.119] (II) This device may have been added with another device file.
[     5.120] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event11)
[     5.120] (II) No input driver specified, ignoring this device.
[     5.120] (II) This device may have been added with another device file.
[     5.120] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event6)
[     5.120] (II) No input driver specified, ignoring this device.
[     5.120] (II) This device may have been added with another device file.
[     5.121] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[     5.121] (II) No input driver specified, ignoring this device.
[     5.121] (II) This device may have been added with another device file.
[     5.121] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8)
[     5.121] (II) No input driver specified, ignoring this device.
[     5.121] (II) This device may have been added with another device file.
[     5.121] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event9)
[     5.121] (II) No input driver specified, ignoring this device.
[     5.121] (II) This device may have been added with another device file.
[     5.122] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     5.122] (II) No input driver specified, ignoring this device.
[     5.122] (II) This device may have been added with another device file.
[     5.124] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event4)
[     5.124] (**) ITE8708 CIR transceiver: Applying InputClass "libinput keyboard catchall"
[     5.124] (II) Using input driver 'libinput' for 'ITE8708 CIR transceiver'
[     5.124] (**) ITE8708 CIR transceiver: always reports core events
[     5.124] (**) Option "Device" "/dev/input/event4"
[     5.124] (**) Option "_source" "server/udev"
[     5.125] (II) event4  - ITE8708 CIR transceiver: is tagged by udev as: Keyboard Pointingstick
[     5.126] (II) event4  - ITE8708 CIR transceiver: device is a pointer
[     5.126] (II) event4  - ITE8708 CIR transceiver: device is a keyboard
[     5.126] (II) event4  - ITE8708 CIR transceiver: device removed
[     5.144] (II) libinput: ITE8708 CIR transceiver: needs a virtual subdevice
[     5.144] (**) Option "config_info" "udev:/sys/devices/pnp0/00:02/rc/rc0/input4/event4"
[     5.144] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: MOUSE, id 10)
[     5.144] (**) Option "AccelerationScheme" "none"
[     5.144] (**) ITE8708 CIR transceiver: (accel) selected scheme none/0
[     5.145] (**) ITE8708 CIR transceiver: (accel) acceleration factor: 2.000
[     5.145] (**) ITE8708 CIR transceiver: (accel) acceleration threshold: 4
[     5.145] (II) event4  - ITE8708 CIR transceiver: is tagged by udev as: Keyboard Pointingstick
[     5.146] (II) event4  - ITE8708 CIR transceiver: device is a pointer
[     5.146] (II) event4  - ITE8708 CIR transceiver: device is a keyboard
[     5.150] (**) ITE8708 CIR transceiver: Applying InputClass "libinput keyboard catchall"
[     5.150] (II) Using input driver 'libinput' for 'ITE8708 CIR transceiver'
[     5.150] (**) ITE8708 CIR transceiver: always reports core events
[     5.150] (**) Option "Device" "/dev/input/event4"
[     5.150] (**) Option "_source" "_driver/libinput"
[     5.150] (II) libinput: ITE8708 CIR transceiver: is a virtual subdevice
[     5.150] (**) Option "config_info" "udev:/sys/devices/pnp0/00:02/rc/rc0/input4/event4"
[     5.151] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD, id 11)
[ 23119.254] (II) event2  - Power Button: device removed
[ 23119.273] (II) event3  - Video Bus: device removed
[ 23119.295] (II) event1  - Power Button: device removed
[ 23119.309] (II) event0  - Sleep Button: device removed
[ 23119.319] (II) event4  - ITE8708 CIR transceiver: device removed
[ 23119.332] (II) UnloadModule: "libinput"
[ 23119.332] (II) UnloadModule: "libinput"
[ 23119.332] (II) UnloadModule: "libinput"
[ 23119.332] (II) UnloadModule: "libinput"
[ 23119.332] (II) UnloadModule: "libinput"
[ 23119.333] (II) UnloadModule: "libinput"
[ 23119.340] (II) Server terminated successfully (0). Closing log file.

Offline

#7 2022-01-22 13:38:24

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,344

Re: Following wiki for tigervnc + LXDE, server starts then stops

That server ran on display :0 for almost 6½ hours?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2022-01-23 02:30:14

train__wreck
Member
Registered: 2020-08-23
Posts: 32

Re: Following wiki for tigervnc + LXDE, server starts then stops

I rebooted the machine, then roughly 6.5 hours later i tried to start the Tigervnc, which promptly exited after 1 second. The X server is enabled at boot and goes to the LXDM login manager. Tigervnc refuses to start regardless of if the X server is running or not.

Last edited by train__wreck (2022-01-23 02:31:14)

Offline

#9 2022-01-23 14:42:25

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 77,344

Re: Following wiki for tigervnc + LXDE, server starts then stops

You're starting the VNC server on :1 but the log is for :0
The interesting log is therefore on the Xorg.1.log - "systemctl status vncserver@:1" might be revealing enough as well (but we're likely only gonna see the xinit server loss)
Whatever there is on :0 is irrelevant but I could imagine that two dummy outputs or LXDM instances don't work(?)

Don't start the useless(?) X11 server on :0 and only run the VNC server. If this still fails, check the proper Xorg log as well as the system journal (the server :0 terminated cleanly, so if that's been a direct response to you launching the VNC server and you want to know what happened, the session process - likely lxdm - might have left a trail there, or any dedicated LXDM log)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB