You are not logged in.

#1 2022-06-21 22:59:36

Deudz
Member
Registered: 2022-06-21
Posts: 4

[SOLVED] External microphone suddenly stopped working

I was doing my things and then my microphone just stopped working outta nowhere
I tried to test but its silent
It was working before but when i installed Audacity i noticed that it stopped working...

I searched everywhere and tried everything i could.

Here is what my arecord -l says:

 **** List of CAPTURE Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: ALC887 Analog [ALC887 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 2: ALC887 Alt Analog [ALC887 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: GoMic [Samson GoMic], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0 

Here is what pacmd list-sources prints out:

 3 source(s) available.
    index: 0
        name: <alsa_output.usb-Samson_Technologies_Samson_GoMic-00.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1040
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Estéreo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        monitor_of: 0
        card: 0 <alsa_card.usb-Samson_Technologies_Samson_GoMic-00>
        module: 6
        properties:
                device.description = "Monitor of GoMic compact condenser mic Estéreo analógico"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "Samson GoMic"
                alsa.long_card_name = "Samson Technologies Samson GoMic at usb-0000:00:1a.0-1.3, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1a.0-usb-0:1.3:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card1"
                udev.id = "usb-Samson_Technologies_Samson_GoMic-00"
                device.bus = "usb"
                device.vendor.id = "17a0"
                device.vendor.name = "Samson Technologies Corp."
                device.product.id = "0305"
                device.product.name = "GoMic compact condenser mic"
                device.serial = "Samson_Technologies_Samson_GoMic"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
  * index: 1
        name: <alsa_input.usb-Samson_Technologies_Samson_GoMic-00.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9049
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 28172 /  43% / -22.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Estéreo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
        card: 0 <alsa_card.usb-Samson_Technologies_Samson_GoMic-00>
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "Samson GoMic"
                alsa.long_card_name = "Samson Technologies Samson GoMic at usb-0000:00:1a.0-1.3, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1a.0-usb-0:1.3:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card1"
                udev.id = "usb-Samson_Technologies_Samson_GoMic-00"
                device.bus = "usb"
                device.vendor.id = "17a0"
                device.vendor.name = "Samson Technologies Corp."
                device.product.id = "0305"
                device.product.name = "GoMic compact condenser mic"
                device.serial = "Samson_Technologies_Samson_GoMic"
                device.string = "front:1"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Estéreo analógico"
                device.description = "GoMic compact condenser mic Estéreo analógico"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>
    index: 2
        name: <bluez_sink.AE_CC_04_C3_EB_84.a2dp_sink.monitor>
        driver: <module-bluez5-device.c>
        flags: DECIBEL_VOLUME LATENCY 
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1050
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Estéreo
        used by: 0
        linked by: 0
        fixed latency: 33.00 ms
        monitor_of: 1
        card: 2 <bluez_card.AE_CC_04_C3_EB_84>
        module: 24
        properties:
                device.description = "Monitor of V!BE "
                device.class = "monitor"
                device.string = "AE:CC:04:C3:EB:84"
                device.api = "bluez"
                device.bus = "bluetooth"
                device.form_factor = "headset"
                bluez.path = "/org/bluez/hci0/dev_AE_CC_04_C3_EB_84"
                bluez.class = "0x340404"
                bluez.alias = "V!BE "
                bluetooth.battery = "100%"
                device.icon_name = "audio-headset-bluetooth"
                device.intended_roles = "phone" 

Everything in alsamixer is unmuted and at maximum volume
By the way, my microphone is the Samson GoMic

EDIT: title was messed up

Last edited by Deudz (2022-06-22 11:54:25)

Offline

#2 2022-06-22 00:37:30

Deudz
Member
Registered: 2022-06-21
Posts: 4

Re: [SOLVED] External microphone suddenly stopped working

Okay i just reinstalled arch linux and it fixed the issue

Offline

#3 2022-06-22 03:03:12

Deudz
Member
Registered: 2022-06-21
Posts: 4

Re: [SOLVED] External microphone suddenly stopped working

It just stopped working again
I feel like it has something to do with yay

Last edited by Deudz (2022-06-22 03:03:29)

Offline

#4 2022-06-22 10:55:43

Deudz
Member
Registered: 2022-06-21
Posts: 4

Re: [SOLVED] External microphone suddenly stopped working

I FOUND THE ISSUE!

xboxdrv, which is my controller driver was causing this
if i disable it and reboot it fixes the issue
it was giving a usbcontroller error
but i found a way to solve that

Offline

Board footer

Powered by FluxBB