You are not logged in.
I was doing my things and then my microphone just stopped working outta nowhere
I tried to test but its silent
It was working before but when i installed Audacity i noticed that it stopped working...
I searched everywhere and tried everything i could.
Here is what my arecord -l says:
**** List of CAPTURE Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: ALC887 Analog [ALC887 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 2: ALC887 Alt Analog [ALC887 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: GoMic [Samson GoMic], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is what pacmd list-sources prints out:
3 source(s) available.
index: 0
name: <alsa_output.usb-Samson_Technologies_Samson_GoMic-00.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1040
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Estéreo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 0
card: 0 <alsa_card.usb-Samson_Technologies_Samson_GoMic-00>
module: 6
properties:
device.description = "Monitor of GoMic compact condenser mic Estéreo analógico"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "Samson GoMic"
alsa.long_card_name = "Samson Technologies Samson GoMic at usb-0000:00:1a.0-1.3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.0-usb-0:1.3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card1"
udev.id = "usb-Samson_Technologies_Samson_GoMic-00"
device.bus = "usb"
device.vendor.id = "17a0"
device.vendor.name = "Samson Technologies Corp."
device.product.id = "0305"
device.product.name = "GoMic compact condenser mic"
device.serial = "Samson_Technologies_Samson_GoMic"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
* index: 1
name: <alsa_input.usb-Samson_Technologies_Samson_GoMic-00.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 28172 / 43% / -22.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Estéreo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
card: 0 <alsa_card.usb-Samson_Technologies_Samson_GoMic-00>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Samson GoMic"
alsa.long_card_name = "Samson Technologies Samson GoMic at usb-0000:00:1a.0-1.3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.0-usb-0:1.3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/sound/card1"
udev.id = "usb-Samson_Technologies_Samson_GoMic-00"
device.bus = "usb"
device.vendor.id = "17a0"
device.vendor.name = "Samson Technologies Corp."
device.product.id = "0305"
device.product.name = "GoMic compact condenser mic"
device.serial = "Samson_Technologies_Samson_GoMic"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Estéreo analógico"
device.description = "GoMic compact condenser mic Estéreo analógico"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
index: 2
name: <bluez_sink.AE_CC_04_C3_EB_84.a2dp_sink.monitor>
driver: <module-bluez5-device.c>
flags: DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1050
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Estéreo
used by: 0
linked by: 0
fixed latency: 33.00 ms
monitor_of: 1
card: 2 <bluez_card.AE_CC_04_C3_EB_84>
module: 24
properties:
device.description = "Monitor of V!BE "
device.class = "monitor"
device.string = "AE:CC:04:C3:EB:84"
device.api = "bluez"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/hci0/dev_AE_CC_04_C3_EB_84"
bluez.class = "0x340404"
bluez.alias = "V!BE "
bluetooth.battery = "100%"
device.icon_name = "audio-headset-bluetooth"
device.intended_roles = "phone"
Everything in alsamixer is unmuted and at maximum volume
By the way, my microphone is the Samson GoMic
EDIT: title was messed up
Last edited by Deudz (2022-06-22 11:54:25)
Offline
Okay i just reinstalled arch linux and it fixed the issue
Offline
It just stopped working again
I feel like it has something to do with yay
Last edited by Deudz (2022-06-22 03:03:29)
Offline
I FOUND THE ISSUE!
xboxdrv, which is my controller driver was causing this
if i disable it and reboot it fixes the issue
it was giving a usbcontroller error
but i found a way to solve that
Offline