Arch Linux

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Nvidia driver is not working

I am trying to switch to my Nvidia rtx3050 on my laptop and its just not working  i tested 2 thinks nvidia-switch and optimus (prime worked but it was giving me 120 fps in minecraft with ulimited fps in setting 1.8 optifine)
nvidia-switch "1"
and
optimus-manager --switch nvidia
when i run these 2 commands it gives me same result

my arch tty1 gets stuck in this I can't hit enter or any commands
please help

https://cdn.discordapp.com/attachments/ … 215451.jpg

           
                                                                 

❯ lspci -k

0000:00:00.0 Host bridge: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
0000:00:01.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe Controller #1 (rev 05)
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: pcieport
0000:00:02.0 VGA compatible controller: Intel Corporation TigerLake-H GT1 [UHD Graphics] (rev 01)
        DeviceName: Onboard - Video
        Subsystem: ASUSTeK Computer Inc. Device 13fc
        Kernel driver in use: i915
        Kernel modules: i915
0000:00:04.0 Signal processing controller: Intel Corporation TigerLake-LP Dynamic Tuning Processor Participant (rev 05)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: proc_thermal
        Kernel modules: processor_thermal_device_pci_legacy
0000:00:06.0 System peripheral: Intel Corporation RST VMD Managed Controller
        DeviceName: Onboard - Other
0000:00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator module (rev 05)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
0000:00:0a.0 Signal processing controller: Intel Corporation Tigerlake Telemetry Aggregator Driver (rev 01)
        DeviceName: Onboard - Other
        Kernel driver in use: intel_vsec
        Kernel modules: intel_vsec
0000:00:0d.0 USB controller: Intel Corporation Tiger Lake-H Thunderbolt 4 USB Controller (rev 05)
        DeviceName: Onboard - Other
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
0000:00:0e.0 RAID bus controller: Intel Corporation Volume Management Device NVMe RAID Controller
        DeviceName: Onboard - Other
        Subsystem: Intel Corporation Device 0000
        Kernel driver in use: vmd
        Kernel modules: vmd
0000:00:14.0 USB controller: Intel Corporation Tiger Lake-H USB 3.2 Gen 2x1 xHCI Host Controller (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 201f
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
0000:00:14.2 RAM memory: Intel Corporation Tiger Lake-H Shared SRAM (rev 11)
        DeviceName: Onboard - Other
0000:00:15.0 Serial bus controller: Intel Corporation Tiger Lake-H Serial IO I2C Controller #0 (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: intel-lpss
        Kernel modules: intel_lpss_pci
0000:00:16.0 Communication controller: Intel Corporation Tiger Lake-H Management Engine Interface (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: mei_me
        Kernel modules: mei_me
0000:00:1c.0 PCI bridge: Intel Corporation Device 43bf (rev 11)
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: pcieport
0000:00:1d.0 PCI bridge: Intel Corporation Device 43b6 (rev 11)
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: pcieport
0000:00:1f.0 ISA bridge: Intel Corporation Tiger Lake-H LPC/eSPI Controller (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
0000:00:1f.3 Audio device: Intel Corporation Tiger Lake-H HD Audio Controller (rev 11)
        DeviceName: Onboard - Sound
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
0000:00:1f.4 SMBus: Intel Corporation Tiger Lake-H SMBus Controller (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
0000:00:1f.5 Serial bus controller: Intel Corporation Tiger Lake-H SPI Controller (rev 11)
        DeviceName: Onboard - Other
        Subsystem: ASUSTeK Computer Inc. Device 16f2
        Kernel driver in use: intel-spi
        Kernel modules: spi_intel_pci
0000:01:00.0 VGA compatible controller: NVIDIA Corporation GA107M [GeForce RTX 3050 Mobile] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device 13fc
        Kernel driver in use: nvidia
        Kernel modules: nouveau, nvidia_drm, nvidia
0000:01:00.1 Audio device: NVIDIA Corporation Device 2291 (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device 13fc
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
0000:02:00.0 Network controller: MEDIATEK Corp. MT7921 802.11ax PCI Express Wireless Network Adapter
        Subsystem: AzureWave Device 4680
        Kernel driver in use: mt7921e
        Kernel modules: mt7921e
0000:03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8162 (rev 05)
        Subsystem: ASUSTeK Computer Inc. Device 208f
        Kernel driver in use: r8169
        Kernel modules: r8169
10000:e0:06.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe Controller #0 (rev 05)
        Kernel driver in use: pcieport
10000:e1:00.0 Non-Volatile memory controller: Intel Corporation Device f1aa (rev 03)
        Subsystem: Intel Corporation Device 390f
        Kernel driver in use: nvme
        Kernel modules: nvme

❯ nvidia-smi
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

❯  sudo journalctl -b | curl -F 'file=@-' 0x0.st :

http://0x0.st/o6jT.txt

❯ glxinfo -B:

name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel (0x8086)
    Device: Mesa Intel(R) UHD Graphics (TGL GT1) (0x9a68)
    Version: 22.2.1
    Accelerated: yes
    Video memory: 15740MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) UHD Graphics (TGL GT1)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 22.2.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 22.2.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.2.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

❯ prime-run glxinfo -B 

name of display: :0
display: :0  screen: 0
direct rendering: Yes
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 4096 MB
    Total available memory: 4096 MB
    Currently available dedicated video memory: 3907 MB
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: NVIDIA GeForce RTX 3050 Laptop GPU/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 520.56.06
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6.0 NVIDIA 520.56.06
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)

OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 520.56.06
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

/etc/X11/xorg.conf :

https://pastebin.com/4CzZ1xz7

❯ sudo nvidia-xconfig

Using X configuration file: "/etc/X11/xorg.conf".

VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf.
                  Device section "Device0" must have a Driver line.


ERROR: Unable to find any GPUs in the system.

Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original'
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

~/.local/share/xorg/Xorg.0.log

https://pastebin.com/EJi5DLZf

Last edited by Hiradexo (2022-11-12 08:33:02)

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

Any ideas ?

Lone_Wolf

Administrator

From: Netherlands, Europe

Registered: 2005-10-04

Posts: 15,162

Re: Nvidia driver is not working

Discussion about ArchPPC, i586 and other architectures. NOT ARM.

Your laptop looks like a x86_64 system, so this subboard is not a good choice.

I suggest you report this thread and request moving it to 'newbie corner' .

You should add the ouput of lspci -k , whether you're using X or wayland , and how you are starting them.

Welcome to archlinux forums.

Last edited by Lone_Wolf (2022-08-29 10:30:58)

---

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

thanks so i must to move my post ???

2ManyDogs

Forum Fellow

Registered: 2012-01-15

Posts: 4,648

Re: Nvidia driver is not working

I suggest you report this thread and request moving it to 'newbie corner' .

thanks so i must to move my post ???

No, you were supposed to ask Staff to move the post, not repost it yourself.

Any ideas ?

Don't do that either. https://wiki.archlinux.org/title/Genera … es#Bumping

I closed your other thread and will move this one. Next time, do not cross post.

I would suggest you read How to Post before you post again.

Moving to Newbie Corner.

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,261

Re: Nvidia driver is not working

Why are you trying to use either of those? Remove both nvidia-switch and optimus-manager, install nvidia-prime, reboot.

After having rebooted/restarted Xorg check whether prime run works

prime-run glxinfo -B

If that doesn't work either, post your dmesg and xorg.log

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

Yes prime worked but i get low fps in minecraft like 120 max thats why i want to use nvidia-switch or optimus

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

my friend with worst gpu laptop in windows get more :\

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 76,436

Re: Nvidia driver is not working

Don't bump, edit your post if nobody has replied.

Post the output of the command V1del posted in #6 and specify what minecraft implementation you use and how you assessed that "prime worked".
Also check the GPU load in nvidia-smi and your CPU load while playing - the GPU isn't necessarily the limiting factor.
If you're running a compositor or the game itself syncs and you've a 120Hz monitor, you're simply vsync'ing.

optimus-manager will not get you from 120 fps to 1000 fps (if it does anything)

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

It's not working anymore
❯ nvidia-smi
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

Im really tired of Archs problems with nvidia

d.ALT

Member

Registered: 2019-05-10

Posts: 959

Re: Nvidia driver is not working

Yes prime worked but i get low fps in minecraft like 120 max thats why i want to use nvidia-switch or optimus

Can't understand if it's bad or fine...

Did you check if fps are capped?
Is V-Sync on or off?

I didn't read anything in yours posts about nVIDIA drivers... Are they installed?

---

<49,17,III,I>    Fama di loro il mondo esser non lassa;
<50,17,III,I>    misericordia e giustizia li sdegna:
<51,17,III,I>    non ragioniam di lor, ma guarda e passa.

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 76,436

Re: Nvidia driver is not working

It's not working anymore

https://bbs.archlinux.org/viewtopic.php?id=57855

@Hiradexo, if you want this thread to go anywhere

sudo journalctl -b | curl -F 'file=@-' 0x0.st
glxinfo -B
prime-run glxinfo -B

and your xorg log https://wiki.archlinux.org/title/Xorg#General

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

Im kinda sure that something is wrong with my xorg config but i don't know what an which

Last edited by Hiradexo (2022-11-11 11:55:24)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 76,436

Re: Nvidia driver is not working

Yeah, we neither.

It's not working anymore

https://bbs.archlinux.org/viewtopic.php?id=57855

@Hiradexo, if you want this thread to go anywhere

sudo journalctl -b | curl -F 'file=@-' 0x0.st
glxinfo -B
prime-run glxinfo -B

and your xorg log https://wiki.archlinux.org/title/Xorg#General

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Hiradexo

Member

Registered: 2022-08-28

Posts: 28

Re: Nvidia driver is not working

~/.local/share/xorg/Xorg.0.log

https://pastebin.com/EJi5DLZf

Last edited by Hiradexo (2022-11-12 08:29:32)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 76,436

Re: Nvidia driver is not working

The log is from

[   167.335] (==) Log file: "/home/hirad/.local/share/xorg/Xorg.0.log", Time: Fri Sep  9 00:01:51 2022

[   167.340] (++) Using config file: "/home/hirad/xorg.conf.new"

references the nvidia driver but the nvidia kernel module isn't loaded.
The increasingly relevant information, your system journal, is still missing

@Hiradexo, if you want this thread to go anywhere

sudo journalctl -b | curl -F 'file=@-' 0x0.st
glxinfo -B
prime-run glxinfo -B

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc