You are not logged in.

Pages: 1

#1 2022-10-12 00:19:24

Handulish
Member
Registered: 2022-08-17
Posts: 14

SOLVED: Unable to install Python2 from AUR

SOLVED

I am trying to install the package jitsi-meet from the AUR, and a dependency listed is Python2. I have successfully installed all other dependencies for both Jitsi-Meet and Python2 itself. If it helps, I'm using i3-wm on a Lenovo T590 ThinkPad; no serious software issues have come up since my reinstallation of Arch Linux a couple months ago.

Using 

sudo pacman -U python2

produces the following error: 

[austin@archlinux python2]$ sudo pacman -U python2
loading packages...
error: 'python2': could not find or read package

Here is the full context (as far back as my terminal session goes):

[austin@archlinux ~]$ sudo pacman -Q git nodejs npm python python2 nginx
[sudo] password for austin: 
git 2.38.0-1
error: package 'nodejs' was not found
error: package 'npm' was not found
python 3.10.7-1
error: package 'python2' was not found
warning: 'python2' is a file, you might want to use -p/--file.
error: package 'nginx' was not found
[austin@archlinux ~]$ sudo pacman -S nodejs npm nginx
resolving dependencies...
looking for conflicting packages...

Packages (10) c-ares-1.18.1-1  geoip-1.6.12-2  geoip-database-20220823-1  libuv-1.44.2-1  node-gyp-9.1.0-1  nodejs-nopt-6.0.0-1
              semver-7.3.8-1  nginx-1.22.0-2  nodejs-18.10.0-1  npm-8.19.2-1

Total Download Size:   15.93 MiB
Total Installed Size:  57.66 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 nodejs-18.10.0-1-x86_64                             10.4 MiB  6.36 MiB/s 00:02 [##############################################] 100%
 geoip-database-20220823-1-any                        2.1 MiB  10.7 MiB/s 00:00 [##############################################] 100%
 npm-8.19.2-1-any                                  1452.4 KiB  8.70 MiB/s 00:00 [##############################################] 100%
 node-gyp-9.1.0-1-any.pkg.tar.zst failed to download
 Total ( 4/10)                                       15.9 MiB   753 KiB/s 00:22 [##############################################] 100%
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from arch.mirror.constant.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from geo.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from europe.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from seoul.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from [url=ftp://ftp.halifax.rwth-aachen.de]ftp.halifax.rwth-aachen.de[/url] : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from de.arch.mirror.kescher.at : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from mirrors.niyawe.de : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from at.arch.mirror.kescher.at : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from sydney.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from archlinux-br.com.br : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from asia.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from mirror.telepoint.bg : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from america.mirror.pkgbuild.com : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from archlinux.thaller.ws : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from archlinux.mailtunnel.eu : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from phinau.de : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from archmirror.it : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from mirror.theash.xyz : The requested URL returned error: 404
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from archlinux.mirror.luzea.de : Could not resolve host: archlinux.mirror.luzea.de
warning: too many errors from archlinux.mirror.luzea.de, skipping for the remainder of this transaction
error: failed retrieving file 'node-gyp-9.1.0-1-any.pkg.tar.zst' from mirror.theo546.fr : The requested URL returned error: 404
warning: failed to retrieve some files
error: failed to commit transaction (failed to retrieve some files)
Errors occurred, no packages were upgraded.
[austin@archlinux ~]$ sudo pacman -Syu
:: Synchronizing package databases...
 core                                               156.3 KiB   181 KiB/s 00:01 [##############################################] 100%
 extra                                             1720.7 KiB  2.75 MiB/s 00:01 [##############################################] 100%
 community                                            7.0 MiB  17.7 MiB/s 00:00 [##############################################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (58) attica-5.99.0-1  baloo-5.99.0-1  flac-1.4.1-2  hugo-0.104.3-1  kactivities-5.99.0-1  karchive-5.99.0-1  kauth-5.99.0-1
              kbookmarks-5.99.0-1  kcmutils-5.99.0-1  kcodecs-5.99.0-1  kcompletion-5.99.0-1  kconfig-5.99.0-1
              kconfigwidgets-5.99.0-1  kcoreaddons-5.99.0-1  kcrash-5.99.0-1  kdbusaddons-5.99.0-1  kdeclarative-5.99.0-1
              kded-5.99.0-1  kdnssd-5.99.0-1  kfilemetadata-5.99.0-1  kglobalaccel-5.99.0-1  kguiaddons-5.99.0-1  ki18n-5.99.0-1
              kiconthemes-5.99.0-1  kidletime-5.99.0-1  kio-5.99.0-1  kirigami2-5.99.0-1  kitemviews-5.99.0-1  kjobwidgets-5.99.0-1
              kjs-5.99.0-1  knewstuff-5.99.0-1  knotifications-5.99.0-1  knotifyconfig-5.99.0-1  kpackage-5.99.0-1  kparts-5.99.0-1
              kpty-5.99.0-1  kservice-5.99.0-1  ktextwidgets-5.99.0-1  kwallet-5.99.0-1  kwidgetsaddons-5.99.0-1
              kwindowsystem-5.99.0-1  kxmlgui-5.99.0-1  libgpg-error-1.46-1  libksba-1.6.2-1  libreoffice-fresh-7.4.1-4
              openssh-9.1p1-1  poppler-22.10.0-1  poppler-qt5-22.10.0-1  purpose-5.99.0-1  python-more-itertools-8.14.0-1
              python-setuptools-1:63.3.0-1  sdl2-2.24.1-1  smbclient-4.17.0-2  solid-5.99.0-1  sonnet-5.99.0-1  syndication-5.99.0-1
              syntax-highlighting-5.99.0-1  threadweaver-5.99.0-1

Total Download Size:   211.08 MiB
Total Installed Size:  657.56 MiB
Net Upgrade Size:        0.22 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 libreoffice-fresh-7.4.1-4-x86_64                   144.3 MiB  20.8 MiB/s 00:07 [##############################################] 100%
 hugo-0.104.3-1-x86_64                               14.0 MiB  21.6 MiB/s 00:01 [##############################################] 100%
 kio-5.99.0-1-x86_64                                  8.0 MiB  20.0 MiB/s 00:00 [##############################################] 100%
 smbclient-4.17.0-2-x86_64                            6.7 MiB  14.9 MiB/s 00:00 [##############################################] 100%
 kwidgetsaddons-5.99.0-1-x86_64                       4.8 MiB  10.7 MiB/s 00:00 [##############################################] 100%
 knewstuff-5.99.0-1-x86_64                         2014.8 KiB  10.6 MiB/s 00:00 [##############################################] 100%
 ki18n-5.99.0-1-x86_64                             1975.2 KiB  10.3 MiB/s 00:00 [##############################################] 100%
 kxmlgui-5.99.0-1-x86_64                           1733.1 KiB  3.34 MiB/s 00:01 [##############################################] 100%
 poppler-22.10.0-1-x86_64                          1565.7 KiB  9.16 MiB/s 00:00 [##############################################] 100%
 syntax-highlighting-5.99.0-1-x86_64               1425.4 KiB  8.70 MiB/s 00:00 [##############################################] 100%
 kcoreaddons-5.99.0-1-x86_64                       1417.2 KiB  9.48 MiB/s 00:00 [##############################################] 100%
 kconfig-5.99.0-1-x86_64                           1187.9 KiB  6.82 MiB/s 00:00 [##############################################] 100%
 kconfigwidgets-5.99.0-1-x86_64                    1161.4 KiB  7.93 MiB/s 00:00 [##############################################] 100%
 openssh-9.1p1-1-x86_64                            1124.4 KiB  5.90 MiB/s 00:00 [##############################################] 100%
 kparts-5.99.0-1-x86_64                            1024.1 KiB  6.02 MiB/s 00:00 [##############################################] 100%
 syndication-5.99.0-1-x86_64                       1023.1 KiB  6.66 MiB/s 00:00 [##############################################] 100%
 sdl2-2.24.1-1-x86_64                               941.2 KiB  6.25 MiB/s 00:00 [##############################################] 100%
 ktextwidgets-5.99.0-1-x86_64                       858.1 KiB  4.66 MiB/s 00:00 [##############################################] 100%
 solid-5.99.0-1-x86_64                              830.8 KiB  4.86 MiB/s 00:00 [##############################################] 100%
 kwindowsystem-5.99.0-1-x86_64                      787.3 KiB  6.10 MiB/s 00:00 [##############################################] 100%
 attica-5.99.0-1-x86_64                             731.2 KiB  4.86 MiB/s 00:00 [##############################################] 100%
 kservice-5.99.0-1-x86_64                           728.6 KiB  4.11 MiB/s 00:00 [##############################################] 100%
 kcmutils-5.99.0-1-x86_64                           719.1 KiB  3.90 MiB/s 00:00 [##############################################] 100%
 sonnet-5.99.0-1-x86_64                             664.0 KiB  5.69 MiB/s 00:00 [##############################################] 100%
 kcompletion-5.99.0-1-x86_64                        622.9 KiB  4.44 MiB/s 00:00 [##############################################] 100%
 kirigami2-5.99.0-1-x86_64                          607.0 KiB  4.23 MiB/s 00:00 [##############################################] 100%
 kbookmarks-5.99.0-1-x86_64                         588.5 KiB  3.76 MiB/s 00:00 [##############################################] 100%
 baloo-5.99.0-1-x86_64                              584.0 KiB  2.66 MiB/s 00:00 [##############################################] 100%
 python-setuptools-1:63.3.0-1-any                   577.3 KiB  2.72 MiB/s 00:00 [##############################################] 100%
 kwallet-5.99.0-1-x86_64                            572.6 KiB  2045 KiB/s 00:00 [##############################################] 100%
 kiconthemes-5.99.0-1-x86_64                        522.8 KiB  4.12 MiB/s 00:00 [##############################################] 100%
 kdeclarative-5.99.0-1-x86_64                       522.0 KiB  3.40 MiB/s 00:00 [##############################################] 100%
 kitemviews-5.99.0-1-x86_64                         511.2 KiB  3.84 MiB/s 00:00 [##############################################] 100%
 knotifications-5.99.0-1-x86_64                     483.2 KiB  3.01 MiB/s 00:00 [##############################################] 100%
 threadweaver-5.99.0-1-x86_64                       458.9 KiB  3.45 MiB/s 00:00 [##############################################] 100%
 kfilemetadata-5.99.0-1-x86_64                      402.5 KiB  2.62 MiB/s 00:00 [##############################################] 100%
 kjs-5.99.0-1-x86_64                                391.6 KiB  2.85 MiB/s 00:00 [##############################################] 100%
 karchive-5.99.0-1-x86_64                           380.6 KiB  2.79 MiB/s 00:00 [##############################################] 100%
 kcodecs-5.99.0-1-x86_64                            356.9 KiB  2.39 MiB/s 00:00 [##############################################] 100%
 purpose-5.99.0-1-x86_64                            339.6 KiB  2.83 MiB/s 00:00 [##############################################] 100%
 kpackage-5.99.0-1-x86_64                           332.4 KiB  2.37 MiB/s 00:00 [##############################################] 100%
 kguiaddons-5.99.0-1-x86_64                         329.7 KiB  1895 KiB/s 00:00 [##############################################] 100%
 kactivities-5.99.0-1-x86_64                        325.1 KiB  1959 KiB/s 00:00 [##############################################] 100%
 kjobwidgets-5.99.0-1-x86_64                        323.1 KiB  2.95 MiB/s 00:00 [##############################################] 100%
 kauth-5.99.0-1-x86_64                              319.9 KiB  1684 KiB/s 00:00 [##############################################] 100%
 flac-1.4.1-2-x86_64                                313.8 KiB  1999 KiB/s 00:00 [##############################################] 100%
 kdnssd-5.99.0-1-x86_64                             313.1 KiB  2046 KiB/s 00:00 [##############################################] 100%
 kglobalaccel-5.99.0-1-x86_64                       265.4 KiB  1229 KiB/s 00:00 [##############################################] 100%
 libgpg-error-1.46-1-x86_64                         241.1 KiB  2.01 MiB/s 00:00 [##############################################] 100%
 kdbusaddons-5.99.0-1-x86_64                        230.0 KiB  2.04 MiB/s 00:00 [##############################################] 100%
 poppler-qt5-22.10.0-1-x86_64                       223.8 KiB   715 KiB/s 00:00 [##############################################] 100%
 kpty-5.99.0-1-x86_64                               207.9 KiB  1276 KiB/s 00:00 [##############################################] 100%
 knotifyconfig-5.99.0-1-x86_64                      205.2 KiB  1754 KiB/s 00:00 [##############################################] 100%
 kidletime-5.99.0-1-x86_64                          147.7 KiB   790 KiB/s 00:00 [##############################################] 100%
 libksba-1.6.2-1-x86_64                             140.2 KiB  1402 KiB/s 00:00 [##############################################] 100%
 kcrash-5.99.0-1-x86_64                             132.5 KiB  1274 KiB/s 00:00 [##############################################] 100%
 python-more-itertools-8.14.0-1-any                  72.7 KiB   661 KiB/s 00:00 [##############################################] 100%
 kded-5.99.0-1-x86_64                                59.6 KiB   579 KiB/s 00:00 [##############################################] 100%
 Total (58/58)                                      211.1 MiB  8.47 MiB/s 00:25 [##############################################] 100%
(58/58) checking keys in keyring                                                [##############################################] 100%
(58/58) checking package integrity                                              [##############################################] 100%
(58/58) loading package files                                                   [##############################################] 100%
(58/58) checking for file conflicts                                             [##############################################] 100%
(58/58) checking available disk space                                           [##############################################] 100%
:: Processing package changes...
( 1/58) upgrading libgpg-error                                                  [##############################################] 100%
( 2/58) upgrading attica                                                        [##############################################] 100%
( 3/58) upgrading ki18n                                                         [##############################################] 100%
( 4/58) upgrading karchive                                                      [##############################################] 100%
( 5/58) upgrading kconfig                                                       [##############################################] 100%
( 6/58) upgrading kcoreaddons                                                   [##############################################] 100%
( 7/58) upgrading poppler                                                       [##############################################] 100%
( 8/58) upgrading poppler-qt5                                                   [##############################################] 100%
( 9/58) upgrading sdl2                                                          [##############################################] 100%
(10/58) upgrading flac                                                          [##############################################] 100%
(11/58) upgrading kfilemetadata                                                 [##############################################] 100%
(12/58) upgrading kidletime                                                     [##############################################] 100%
New optional dependencies for kidletime
    qt5-wayland: Wayland plugin [installed]
(13/58) upgrading libksba                                                       [##############################################] 100%
(14/58) upgrading solid                                                         [##############################################] 100%
(15/58) upgrading kwidgetsaddons                                                [##############################################] 100%
(16/58) upgrading kjobwidgets                                                   [##############################################] 100%
(17/58) upgrading kdbusaddons                                                   [##############################################] 100%
(18/58) upgrading kwindowsystem                                                 [##############################################] 100%
(19/58) upgrading kcrash                                                        [##############################################] 100%
(20/58) upgrading kglobalaccel                                                  [##############################################] 100%
(21/58) upgrading kauth                                                         [##############################################] 100%
(22/58) upgrading kcodecs                                                       [##############################################] 100%
(23/58) upgrading kguiaddons                                                    [##############################################] 100%
(24/58) upgrading kconfigwidgets                                                [##############################################] 100%
(25/58) upgrading kiconthemes                                                   [##############################################] 100%
(26/58) upgrading kitemviews                                                    [##############################################] 100%
(27/58) upgrading kxmlgui                                                       [##############################################] 100%
(28/58) upgrading kbookmarks                                                    [##############################################] 100%
(29/58) upgrading knotifications                                                [##############################################] 100%
(30/58) upgrading kservice                                                      [##############################################] 100%
(31/58) upgrading kwallet                                                       [##############################################] 100%
(32/58) upgrading kcompletion                                                   [##############################################] 100%
(33/58) upgrading sonnet                                                        [##############################################] 100%
(34/58) upgrading ktextwidgets                                                  [##############################################] 100%
(35/58) upgrading kded                                                          [##############################################] 100%
(36/58) upgrading kio                                                           [##############################################] 100%
(37/58) upgrading baloo                                                         [##############################################] 100%
(38/58) upgrading hugo                                                          [##############################################] 100%
(39/58) upgrading kactivities                                                   [##############################################] 100%
(40/58) upgrading kpackage                                                      [##############################################] 100%
(41/58) upgrading kdeclarative                                                  [##############################################] 100%
(42/58) upgrading kcmutils                                                      [##############################################] 100%
(43/58) upgrading kdnssd                                                        [##############################################] 100%
(44/58) upgrading kirigami2                                                     [##############################################] 100%
(45/58) upgrading kjs                                                           [##############################################] 100%
(46/58) upgrading syndication                                                   [##############################################] 100%
(47/58) upgrading knewstuff                                                     [##############################################] 100%
(48/58) upgrading knotifyconfig                                                 [##############################################] 100%
(49/58) upgrading kparts                                                        [##############################################] 100%
(50/58) upgrading kpty                                                          [##############################################] 100%
(51/58) upgrading libreoffice-fresh                                             [##############################################] 100%
(52/58) upgrading openssh                                                       [##############################################] 100%
(53/58) upgrading purpose                                                       [##############################################] 100%
(54/58) upgrading python-more-itertools                                         [##############################################] 100%
(55/58) upgrading python-setuptools                                             [##############################################] 100%
(56/58) upgrading smbclient                                                     [##############################################] 100%
(57/58) upgrading syntax-highlighting                                           [##############################################] 100%
(58/58) upgrading threadweaver                                                  [##############################################] 100%
:: Running post-transaction hooks...
(1/8) Reloading system manager configuration...
(2/8) Creating temporary files...
(3/8) Arming ConditionNeedsUpdate...
(4/8) Updating the MIME type database...
(5/8) Reloading system bus configuration...
(6/8) Updating icon theme caches...
(7/8) Updating the info directory file...
(8/8) Updating the desktop file MIME type cache...
[austin@archlinux ~]$ sudo pacman -S nodejs npm nginx
resolving dependencies...
looking for conflicting packages...

Packages (10) c-ares-1.18.1-1  geoip-1.6.12-2  geoip-database-20220823-1  libuv-1.44.2-1  node-gyp-9.2.0-1  nodejs-nopt-6.0.0-1
              semver-7.3.8-1  nginx-1.22.0-2  nodejs-18.10.0-1  npm-8.19.2-1

Total Download Size:    2.08 MiB
Total Installed Size:  57.63 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 node-gyp-9.2.0-1-any                               979.1 KiB   996 KiB/s 00:01 [##############################################] 100%
 nginx-1.22.0-2-x86_64                              585.8 KiB  2.34 MiB/s 00:00 [##############################################] 100%
 libuv-1.44.2-1-x86_64                              230.2 KiB  2.04 MiB/s 00:00 [##############################################] 100%
 c-ares-1.18.1-1-x86_64                             201.8 KiB  2018 KiB/s 00:00 [##############################################] 100%
 geoip-1.6.12-2-x86_64                               86.9 KiB   869 KiB/s 00:00 [##############################################] 100%
 semver-7.3.8-1-any                                  36.0 KiB   229 KiB/s 00:00 [##############################################] 100%
 nodejs-nopt-6.0.0-1-any                             12.5 KiB   134 KiB/s 00:00 [##############################################] 100%
 Total (7/7)                                          2.1 MiB   835 KiB/s 00:03 [##############################################] 100%
(10/10) checking keys in keyring                                                [##############################################] 100%
(10/10) checking package integrity                                              [##############################################] 100%
(10/10) loading package files                                                   [##############################################] 100%
(10/10) checking for file conflicts                                             [##############################################] 100%
(10/10) checking available disk space                                           [##############################################] 100%
:: Processing package changes...
( 1/10) installing libuv                                                        [##############################################] 100%
( 2/10) installing c-ares                                                       [##############################################] 100%
( 3/10) installing nodejs                                                       [##############################################] 100%
Optional dependencies for nodejs
    npm: nodejs package manager [pending]
( 4/10) installing nodejs-nopt                                                  [##############################################] 100%
( 5/10) installing semver                                                       [##############################################] 100%
( 6/10) installing node-gyp                                                     [##############################################] 100%
( 7/10) installing npm                                                          [##############################################] 100%
( 8/10) installing geoip-database                                               [##############################################] 100%
( 9/10) installing geoip                                                        [##############################################] 100%
Optional dependencies for geoip
    geoip-database-extra: city/ASN databases (not needed for country lookups)
(10/10) installing nginx                                                        [##############################################] 100%
:: Running post-transaction hooks...
(1/2) Reloading system manager configuration...
(2/2) Arming ConditionNeedsUpdate...
[austin@archlinux ~]$ sudo pacman -S python2
error: target not found: python2
warning: 'python2' is a file, did you mean -U/--upgrade instead of -S/--sync?
[austin@archlinux ~]$ sudo pacman -Q python2
error: package 'python2' was not found
warning: 'python2' is a file, you might want to use -p/--file.
[austin@archlinux ~]$ sudo pacman -p python2
error: invalid option '-p'
[austin@archlinux ~]$ python2 -p
bash: python2: command not found
[austin@archlinux ~]$ python2
bash: python2: command not found
[austin@archlinux ~]$ sudo pacman -Qp
error: no targets specified (use -h for help)
[austin@archlinux ~]$ sudo pacman -Qp python2
error: could not open file python2: Error reading fd 5
error: could not load package 'python2': cannot open package file
[austin@archlinux ~]$ pacman -S --help
usage:  pacman {-S --sync} [options] [package(s)]
options:
  -b, --dbpath <path>  set an alternate database location
  -c, --clean          remove old packages from cache directory (-cc for all)
  -d, --nodeps         skip dependency version checks (-dd to skip all checks)
  -g, --groups         view all members of a package group
                       (-gg to view all groups and members)
  -i, --info           view package information (-ii for extended information)
  -l, --list <repo>    view a list of packages in a repo
  -p, --print          print the targets instead of performing the operation
  -q, --quiet          show less information for query and search
  -r, --root <path>    set an alternate installation root
  -s, --search <regex> search remote repositories for matching strings
  -u, --sysupgrade     upgrade installed packages (-uu enables downgrades)
  -v, --verbose        be verbose
  -w, --downloadonly   download packages but do not install/upgrade anything
  -y, --refresh        download fresh package databases from the server
                       (-yy to force a refresh even if up to date)
      --arch <arch>    set an alternate architecture
      --asdeps         install packages as non-explicitly installed
      --asexplicit     install packages as explicitly installed
      --assume-installed <package=version>
                       add a virtual package to satisfy dependencies
      --cachedir <dir> set an alternate package cache location
      --color <when>   colorize the output
      --config <path>  set an alternate configuration file
      --confirm        always ask for confirmation
      --dbonly         only modify database entries, not package files
      --debug          display debug messages
      --disable-download-timeout
                       use relaxed timeouts for download
      --gpgdir <path>  set an alternate home directory for GnuPG
      --hookdir <dir>  set an alternate hook location
      --ignore <pkg>   ignore a package upgrade (can be used more than once)
      --ignoregroup <grp>
                       ignore a group upgrade (can be used more than once)
      --logfile <path> set an alternate log file
      --needed         do not reinstall up to date packages
      --noconfirm      do not ask for any confirmation
      --noprogressbar  do not show a progress bar when downloading files
      --noscriptlet    do not execute the install scriptlet if one exists
      --overwrite <glob>
                       overwrite conflicting files (can be used more than once)
      --print-format <string>
                       specify how the targets should be printed
      --sysroot        operate on a mounted guest system (root-only)
[austin@archlinux ~]$ sudo pacman -Fp python2
[austin@archlinux ~]$ sudo pacman -F --help
usage:  pacman {-F --files} [options] [file(s)]
options:
  -b, --dbpath <path>  set an alternate database location
  -l, --list           list the files owned by the queried package
  -q, --quiet          show less information for query and search
  -r, --root <path>    set an alternate installation root
  -v, --verbose        be verbose
  -x, --regex          enable searching using regular expressions
  -y, --refresh        download fresh package databases from the server
                       (-yy to force a refresh even if up to date)
      --arch <arch>    set an alternate architecture
      --cachedir <dir> set an alternate package cache location
      --color <when>   colorize the output
      --config <path>  set an alternate configuration file
      --confirm        always ask for confirmation
      --debug          display debug messages
      --disable-download-timeout
                       use relaxed timeouts for download
      --gpgdir <path>  set an alternate home directory for GnuPG
      --hookdir <dir>  set an alternate hook location
      --logfile <path> set an alternate log file
      --machinereadable
                       produce machine-readable output
      --noconfirm      do not ask for any confirmation
      --sysroot        operate on a mounted guest system (root-only)
[austin@archlinux ~]$ sudo pacman -Sp python2
error: target not found: python2
[austin@archlinux ~]$ whereis python2
python2:
[austin@archlinux ~]$ cd /python2
bash: cd: /python2: No such file or directory
[austin@archlinux ~]$ cd python2
[austin@archlinux python2]$ sudo pacman -U
error: no targets specified (use -h for help)
[austin@archlinux python2]$ sudo pacman -U python2
loading packages...
error: 'python2': could not find or read package
[austin@archlinux python2]$ whereis python2
python2:
[austin@archlinux python2]$ sudo pacman -U /python2
loading packages...
error: '/python2': could not find or read package
[austin@archlinux python2]$ sudo pacman -Syu
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
:: Starting full system upgrade...
 there is nothing to do
[austin@archlinux python2]$ pwd
/home/austin/python2
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2
loading packages...
error: could not open file /home/austin/python2: Error reading fd 7
error: '/home/austin/python2': cannot open package file
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2/PKGBUILD
loading packages...
error: could not open file /home/austin/python2/PKGBUILD: Unrecognized archive format
error: '/home/austin/python2/PKGBUILD': cannot open package file
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2/pkg
loading packages...
error: could not open file /home/austin/python2/pkg: Error reading fd 7
error: '/home/austin/python2/pkg': cannot open package file
[austin@archlinux python2]$ git clone /python2
fatal: repository '/python2' does not exist
[austin@archlinux python2]$ pyton2 --file
bash: pyton2: command not found
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2/src/Python-2.7.18.tar.xz 
loading packages...
error: missing package metadata in /home/austin/python2/src/Python-2.7.18.tar.xz
error: '/home/austin/python2/src/Python-2.7.18.tar.xz': invalid or corrupted package

And the output of history just after this last context:

   40  exit
   41  shutdown now
   42  acpi -V
   43  exit
   44  nnn
   45  exit
   46  sudo pacman -Syu
   47  exit
   48  shutdown now
   49  shutdown now
   50  acpi -V
   51  exit
   52  shutdown now
   53  acpi -V
   54  exit
   55  acpi -V
   56  exit
   57  shutdown now
   58  acpi -V
   59  exit
   60  acpi -V
   61  exit
   62  history
   63  exit
   64  shutdown now
   65  acpi -V
   66  exit
   67  shutdown now
   68  nnn
   69  exit
   70  unzip /home/austin/School/lab2.zip
   71  sudo pacman -S unzip
   72  unzip /home/austin/School/lab2.zip
   73  exit
   74  nnn
   75  unzip /home/austin/School/lab2.zip
   76  shutdown now
   77  acpi -V
   78  sudo pacman -Q lynx
   79  sudo pacman -F lynx
   80  sudo pacman -S lynx
   81  lynx
   82  exit
   83  shutdown now
   84  acpi -V
   85  exit
   86  nmcli dev wifi-list
   87  nmcli dev wifi list
   88  sudo nmcli dev wifi connect TMOBILE-DEBB password 78ae72f944
   89  exit
   90  acpi -V
   91  acpi -V
   92  exit
   93  shutdown now
   94  acpi -V
   95  sudo pacman -Syu
   96  exit
   97  shutdown now
   98  acpi -V
   99  exit
  100  exit
  101  shutdown now
  102  acpi -V
  103  exit
  104  acpi -V
  105  sudo pacman -S kcalc
  106  nnn
  107  shutdown now
  108  acpi -V
  109  exit
  110  nmcli dev wifi list
  111  sudo nmcli dev wifi connect YourTrainWiFi
  112  exit
  113  acpi -V
  114  exit
  115  acpi -V
  116  exit
  117  acpi -V
  118  exit
  119  lynx
  120  lynx
  121  lynx
  122  exit
  123  acpi -V
  124  exit
  125  lynx
  126  exit
  127  shutdown now
  128  acpi -V
  129  exit
  130  shutdown now
  131  acpi -V
  132  exit
  133  2 + 3
  134  sudo pacman -S palemoon
  135  sudo pacman -F palemoon
  136  exit
  137  shutdown now
  138  acpi -V
  139  exit
  140  shutdown now
  141  acpi -V
  142  exit
  143  whereis ~/.emacs
  144  emacs ~/.emacs
  145  shutdown now
  146  acpi -V
  147  exit
  148  sudo pacman -Syu
  149  exit
  150  exit
  151  shutdown now
  152  acpi -V
  153  exit
  154  shutdown now
  155  acpi -V
  156  exit
  157  xset s off
  158  exit
  159  acpi -V
  160  exit
  161  shutdown now
  162  acpi -V
  163  exit
  164  acpi -V
  165  exit
  166  shutdown now
  167  acpi -V
  168  lynx
  169  exit
  170  nnn
  171  exit
  172  whereis ~/.config/mimeapps.list
  173  emacs ~/.config/mimeapps.list
  174  whereis xdg-open
  175  exit
  176  acpi -V
  177  exit
  178  acpi -V
  179  exit
  180  shutdown now
  181  acpi -V
  182  lynx
  183  exit
  184  acpi -V
  185  exit
  186  history
  187  xset s off
  188  exit
  189  acpi -V
  190  exit
  191  lynx
  192  exit
  193  acpi -V
  194  exit
  195  shutdown now
  196  acpi -V
  197  exit
  198  shutdown now
  199  acpi -V
  200  exit
  201  sudo pacman -Q alsa-lib dbus-glib desktop-file-utils gtk2 libxt mime-types startup-notification
  202  sudo pacman -Q autoconf2.13 git libpulse python2 unzip yasm zip ffmpeg
  203  sudo pacman -S yasm
  204  sudo pacman -S zip
  205  sudo pacman -Q libpulse
  206  git clone [url]https://aur.archlinux.org/palemoon.git[/url]
  207  makepkg -si
  208  sudo pacman -Q pkgbuild
  209  sudo pacman -S pkgbuild
  210  makepkg -si
  211  sudo makepkg -si
  212  sudo pacman -Q pkgbuild.asc
  213  sudo pacman -Syu
  214  exit
  215  cd /palemoon
  216  whereis palemonn
  217  whereis palemoon
  218  ls
  219  git clone [url]https://aur.archlinux.org/palemoon.git[/url]
  220  cd palemoon
  221  makepkg -si
  222  sudo pacman -S python2 autoconf2.13
  223  sudo pacman -S python2-bin
  224  sudo pacman -Q bzip2 expat gdbm libffi libnsl libxcrypt openssl sqlite zlib bluez-libs tk file gdb xorg-server-xvfb
  225  sudo pacman -S tk gdb xorg-server-xvfb
  226  git glone [url]https://aur.archlinux.org/python2.git[/url]
  227  exit
  228  acpi -V
  229  shutdown now
  230  acpi -V
  231  exit
  232  history
  233  git clone [url]https://aur.archlinux.org/python2.git[/url]
  234  cd /python2
  235  cd python2
  236  makepkg -si
  237  makepkg -si gpg --import 04C367C218ADD4FF
  238  sudo pacman -S gnupg
  239  makepkg -si
  240  gpg --keyserver pgp.mit.edu --recv-keys 04C367C218ADD4FF
  241  history
  242  cd python2
  243  makepkg -si --nocheck
  244  gpg --list-keys
  245  sudo pacman-key --recv-keys 04C367C218ADD4FF
  246  makepkg -si
  247  gpg --keyserver pgp.mit.edu --recv-keys 04C367C218ADD4FF
  248  ps T
  249  exit
  250  htop
  251  exit
  252  man ps
  253  exit
  254  history
  255  gpg --recv-keys 04C367C218ADD4FF
  256  cd python2
  257  makepkg -si
  258  sudo pacman -Q python2
  259  sudo pacman -S python
  260  LC_ALL=C pacman -V|sed -r 's#[0-9]+#2cb#g'|md5sum|cut -c1-6 
  261  history
  262  exit
  263  sudo pacman -S openvpn
  264  exit
  265  sudo pacman -Q pass
  266  sudo pacman -S pass
  267  exit
  268  shutdown now
  269  acpi -V
  270  exit
  271  shutdown now
  272  killall emacs
  273  exit
  274  hugo version
  275  sudo pacman -S hugo
  276  exit
  277  sudo pacman -S hugo
  278  sudo pacman -S hugo
  279  exit
  280  lspci
  281  nmcli dev wifi
  282  sudo pacman -S hugo
  283  exit
  284  sudo pacman -Q netctl
  285  sudo pacman -S netctl
  286  netctl
  287  exit
  288  acpi -V
  289  exit
  290  acpi -V
  291  exit
  292  acpi -V
  293  exit
  294  shutdown now
  295  sudo pacman -S hugo
  296  sudo pacman -Syu
  297  sudo pacman -S hugo
  298  hugo
  299  exit
  300  exit
  301  acpi -V
  302  exit
  303  shutdown now
  304  acpi -V
  305  exit
  306  hugo version
  307  exit
  308  sudo pacman -Q gpg
  309  sudo pacman -S gpg
  310  sudo pacman -Q gnupg
  311  sudo pacman -Syu
  312  sudo pacman -Q hicolor-icon-theme libsecret ttf-dejavu gcc git go
  313  sudo pacman -S go
  314  git clone [url]https://aur.archlinux.org/protonmail-bridge.git[/url]
  315  cd [url]https://aur.archlinux.org/protonmail-bridge.git[/url]
  316  cd protonmail-bridge
  317  makepkg -si
  318  gpg --batch --passphrase '' --quick-gen-key 'ProtonMail Bridge' default default never
  319  pass init "ProtonMail Bridge"
  320  protonmail-bridge --cli
  321  telnet 127.0.0.1 1025
  322  sudo pacman -S telnet
  323  nohup protonmail-bridge --noninteractive > bridge_log.txt 2>&1 &
  324  disown
  325  sudo pacman -Q libtelnet
  326  sudo pacman -Q zlib autoconf libtool make patch pkg-config
  327  sudo pacman -Q telnetd
  328  sudo pacman -S telnetd
  329  sudo pacman -Q telnet-server
  330  git clone [url]https://aur.archlinux.org/libtelnet.git[/url]
  331  cd libtelnet
  332  makepkg -si
  333  telnet
  334  libtelnet
  335  sudo pacman -Q inetutils
  336  sudo pacman -S inetutils
  337  telnet 127.0.0.1 1025
  338  telnet 127.0.0.1 1025
  339  sudo pacman -Q mu4e
  340  sudo pacman -S mu4e
  341  sudo pacman -Q gmime3 xapian-core meson
  342  sudo pacman -S gmime3 xapian-core meson
  343  git clone [url]https://aur.archlinux.org/mu.git[/url]
  344  cd mu
  345  makepkg -si
  346  sudo pacman -Q isync
  347  sudo pacman -S isync
  348  emacs ~/.mbsyncrc
  349  protonmail-bridge --cli
  350  history
  351  killall protonmail-bridge --cli
  352  protonmail-bridge --cli
  353  protonmail-bridge --cli >>file.txt 2>&1
  354  emacs file.txt
  355  shelr
  356  sudo pacman -S shelr
  357  login >>file3.txt 2>&1
  358  emacs file3.txt
  359  kill protonmail-bridge
  360  killall protonmail-bridge
  361  protonmail-bridge --cli
  362  telnet
  363  nohup protonmail-bridge --noninteractive > bridge_log.txt 2>&1 &
  364  disown
  365  telnet 127.0.0.1 1025
  366  emacs ~/.config/systemd/user/mbsync.service
  367  emacs ~/.config/systemd/user/mbsync.service
  368  exit
  369  shutdown now
  370  shutdown now
  371  acpi -V
  372  exit
  373  status protonmail-bridge
  374  process protonmail-bridge
  375  ps protonmail-bridge
  376  ps
  377  ps -e
  378  exit
  379  sudo pacman -S thunderbird
  380  exit
  381  shutdown now
  382  acpi -V
  383  exit
  384  shutdown now
  385  history
  386  xset s off
  387  exit
  388  shutdown now
  389  acpi -V
  390  exit
  391  shutdown now
  392  acpi -V
  393  exit
  394  sudo pacman -Q baloo
  395  exit
  396  shutdown now
  397  acpi -V
  398  exit
  399  history
  400  xset s off
  401  exit
  402  acpi -V
  403  exit
  404  shutdown now
  405  acpi -V
  406  exit
  407  shutdown now
  408  acpi -V
  409  exit
  410  history
  411  xset s off
  412  exit
  413  acpi -V
  414  exit
  415  acpi -V
  416  exit
  417  acpi -V
  418  exit
  419  acpi -V
  420  exit
  421  shutdown now
  422  acpi -V
  423  exit
  424  shutdown now
  425  acpi -V
  426  exit
  427  history
  428  xset s off
  429  exit
  430  acpi -V
  431  exit
  432  acpi -V
  433  exit
  434  shutdown now
  435  acpi -V
  436  exit
  437  xset s off
  438  exit
  439  shutdown now
  440  acpi -V
  441  exit
  442  acpi -V
  443  exit
  444  killall thunderbird
  445  exit
  446  shutdown now
  447  acpi -V
  448  exit
  449  shutdown now
  450  acpi -V
  451  exit
  452  acpi -V
  453  exit
  454  shutdown now
  455  acpi -V
  456  xset s off
  457  exit
  458  shutdown now
  459  acpi -V
  460  exit
  461  xset s off
  462  exit
  463  shutdown now
  464  acpi -V
  465  exit
  466  xset s off
  467  exit
  468  shutdown now
  469  acpi -V
  470  exit
  471  xset s off
  472  exit
  473  shutdown now
  474  xset s off
  475  exit
  476  acpi -V
  477  exit
  478  sudo pacman -Syu
  479  exit
  480  shutdown now
  481  acpi -V
  482  exit
  483  shutdown now
  484  acpi -V
  485  exit
  486  shutdown now
  487  xset s off
  488  exit
  489  shutdown now
  490  acpi -V
  491  history
  492  xset s off
  493  exit
  494  shutdown now
  495  acpi -V
  496  exit
  497  xset s off
  498  exit
  499  acpi -V
  500  exit
  501  sudo pacman -Q git nodejs npm python python2 nginx
  502  sudo pacman -S nodejs npm nginx
  503  sudo pacman -Syu
  504  sudo pacman -S nodejs npm nginx
  505  sudo pacman -S python2
  506  sudo pacman -Q python2
  507  sudo pacman -p python2
  508  python2 -p
  509  python2
  510  sudo pacman -Qp
  511  sudo pacman -Qp python2
  512  pacman -S --help
  513  sudo pacman -Fp python2
  514  sudo pacman -F --help
  515  sudo pacman -Sp python2
  516  whereis python2
  517  cd /python2
  518  cd python2
  519  sudo pacman -U
  520  sudo pacman -U python2
  521  whereis python2
  522  sudo pacman -U /python2
  523  sudo pacman -Syu
  524  pwd
  525  sudo pacman -U /home/austin/python2
  526  sudo pacman -U /home/austin/python2/PKGBUILD
  527  sudo pacman -U /home/austin/python2/pkg
  528  git clone /python2
  529  pyton2 --file
  530  sudo pacman -U /home/austin/python2/src/Python-2.7.18.tar.xz 
  531  git clone [url]https://aur.archlinux.org/python2.git[/url]
  532  cd /python2
  533  makepkg -si
  534  cd /python2
  535  makepkg -si
  536  sudo pacman -U
  537  sudo pacman -U python2
  538  pacman -F python2
  539  history

For the record, I previous tried to install Python2 (so I could install another, unrelated AUR package) and got about this far, but eventually gave up.

Other potentially helpful information: I ran 

sudo pacman -Syu

; this got all of the dependencies in 

sudo pacman -S nodejs npm nginx

to successfully install.

Existing resources I've referenced so far:

https://wiki.archlinux.org/title/Pacman … g_packages
https://www.addictivetips.com/ubuntu-li … eet-linux/
https://wiki.archlinux.org/title/Jitsi-meet
https://bbs.archlinux.org/viewtopic.php?id=119953

The comments on the Python2 AUR page.

The following queries on DuckDuckGo: "can't install Python2 Arch Linux", "cannot open package file python2", "could not find or read package pacman arch linux", "-p file python2 arch linux pacman"

Last edited by Handulish (2022-11-08 23:50:15)

Offline

#2 2022-10-12 00:25:13

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,330
Website

Re: SOLVED: Unable to install Python2 from AUR

First, edit your post to properly use bbcode tags otherwise this is completely unreadable.

But at least one obvious error is your command to install python2 is complete jibberish.  Where did you get the idea to try to run that?  You can install an aur package by passing the -i flag to makepkg, or if you use `pacman -U` you need to give the .pkg.tar.xz package file, not just a name.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2022-10-12 00:46:08

Handulish
Member
Registered: 2022-08-17
Posts: 14

Re: SOLVED: Unable to install Python2 from AUR

I put in bbcode.

I navigated to python2 in the terminal then ran 

makepkg -i

; I got the error message : 

==> ERROR: A failure occurred in prepare().
    Aborting...

I tried running 

sudo pacman -U /home/austin/python2/src/Python-2.7.18.tar.xz

; it doesn't work either, saying 

error: missing package metadata in /home/austin/python2/src/Python-2.7.18.tar.xz
error: '/home/austin/python2/src/Python-2.7.18.tar.xz': invalid or corrupted package

. The same happens with the other pkg.tar.xz package I tried.

Here is the full terminal exchange:

[austin@archlinux ~]$ cd /python2
bash: cd: /python2: No such file or directory
[austin@archlinux ~]$ cd python2
[austin@archlinux python2]$ makepkg -i
==> Making package: python2 2.7.18-6 (Tue 11 Oct 2022 05:36:04 PM PDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
  -> Found Python-2.7.18.tar.xz
  -> Found Python-2.7.18.tar.xz.asc
  -> Found mtime-workaround.patch
  -> Found python-gentoo-patches-2.7.18_p15.tar.xz
==> Validating source files with sha512sums...
    Python-2.7.18.tar.xz ... Passed
    Python-2.7.18.tar.xz.asc ... Skipped
    mtime-workaround.patch ... Passed
    python-gentoo-patches-2.7.18_p15.tar.xz ... Passed
==> Verifying source file signatures with gpg...
    Python-2.7.18.tar.xz ... Passed
==> Extracting sources...
  -> Extracting Python-2.7.18.tar.xz with bsdtar
==> Starting prepare()...
bsdtar: Removing leading '/' from member names
patching file Makefile.pre.in
patching file Lib/tarfile.py
The next patch would create the file Misc/NEWS.d/next/Library/2020-07-12-22-16-58.bpo-39017.x3Cg-9.rst,
which already exists!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.
1 out of 1 hunk ignored
==> ERROR: A failure occurred in prepare().
    Aborting...
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2/src/Python-2.7.18.tar.xz 
[sudo] password for austin: 
loading packages...
error: missing package metadata in /home/austin/python2/src/Python-2.7.18.tar.xz
error: '/home/austin/python2/src/Python-2.7.18.tar.xz': invalid or corrupted package
[austin@archlinux python2]$ sudo pacman -U /home/austin/python2/src/python-gentoo-patches-2.7.18_p15.tar.xz 
loading packages...
error: missing package metadata in /home/austin/python2/src/python-gentoo-patches-2.7.18_p15.tar.xz
error: '/home/austin/python2/src/python-gentoo-patches-2.7.18_p15.tar.xz': invalid or corrupted package
[austin@archlinux python2]$

Since it appears the issue is the some sort of flaw(s) in both packages, would re-doing the git clone of the Python2 package from the AUR possibly solve the issue? I tried that before, but then I got the 

A failure occurred in prepare()

issue; is there another way to go about doing this?

Offline

#4 2022-10-12 01:12:00

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,330
Website

Re: SOLVED: Unable to install Python2 from AUR

I said the .pkg.tar.xz file ... the built package file, not the source archives.

As for the patch error it is due to running makepkg again in the same directory.  You should be able to use `makepkg -ei`.  But in anycase, like in your previous thread, you should not be using arch linux.  You have no idea what you are doing on a command line and your random flailing is going to do damage.

Last edited by Trilby (2022-10-12 01:12:15)

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#5 2022-10-20 12:13:06

jm_123
Member
Registered: 2022-10-20
Posts: 2

Re: SOLVED: Unable to install Python2 from AUR

I had the same"next patch would create the file...which already exists" issue. For me, I just switched to the binary package:

pacaur -S python2-bin

Last edited by jm_123 (2022-10-20 12:14:00)

Offline

#6 2022-10-21 03:51:10

lfitzgerald
Member
Registered: 2021-07-16
Posts: 172

Re: SOLVED: Unable to install Python2 from AUR

python2 is an AUR package, but what you've shown is missing some steps. Try following https://wiki.archlinux.org/title/Arch_U … g_packages

What jm_123 posted is an AUR helper that automates it for you, but note that these are officially unsupported: https://wiki.archlinux.org/title/AUR_helpers

For people who find this later: You can also install python2 with pyenv, which might be easier. I dunno if it would satisfy dependencies of jitsi, but it will provide a working python2 command (after you set global python version as in "pyenv help global").

Last edited by lfitzgerald (2022-10-21 03:52:32)

Offline

#7 2022-11-08 23:42:14

Handulish
Member
Registered: 2022-08-17
Posts: 14

Re: SOLVED: Unable to install Python2 from AUR

jm_123: Your solution worked!

Thank everyone for their time and help!

Offline

#8 2022-11-08 23:48:39

WorMzy
Administrator
From: Scotland
Registered: 2010-06-16
Posts: 12,381
Website

Re: SOLVED: Unable to install Python2 from AUR

Please remember to mark your thread as solved by editing the first post and amending the topic title.

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

Pages: 1

Board footer

Powered by FluxBB