You are not logged in.
Pages: 1
When using "nmcli" (or similar commands) the only network interface shown is "lo" and "eth0", this happened both on the boot USB and the system once everything was installed.
Wifi card info according to "lspci -k":
02:00.0 Network controller: Qualcomm QCNFA765 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc Device a82d
Kernel driver in use: ath11k_pci
What I've tried:
Using a ZorinOS live USB to minimize the possibilities of a misconfiguration on my side.
How should I go about troubleshooting / fixing this?
Last edited by aflyingpumpkin (2023-01-14 21:02:53)
Offline
Does copying this file to /lib/firmware/ath11k/WCN6855/hw2.0/ get things working?
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=215625
Jin, Jîyan, Azadî
Offline
Thanks for getting me looking in the right direction! I also needed to copy the file to /lib/firmware/ath11k/WCN6855/hw2.1/ to get things working properly!
Offline
Pages: 1