You are not logged in.

#1 2023-01-09 06:40:36

aflyingpumpkin
Member
Registered: 2021-02-12
Posts: 14

[Solved] Razor Blade 14 No Wifi Interface

When using "nmcli" (or similar commands) the only network interface shown is "lo" and "eth0", this happened both on the boot USB and the system once everything was installed.

Wifi card info according to "lspci -k":

02:00.0 Network controller: Qualcomm QCNFA765 Wireless Network Adapter (rev 01)
        Subsystem: Lite-On Communications Inc Device a82d
        Kernel driver in use: ath11k_pci

What I've tried:
Using a ZorinOS live USB to minimize the possibilities of a misconfiguration on my side.

How should I go about troubleshooting / fixing this?

Last edited by aflyingpumpkin (2023-01-14 21:02:53)

Offline

#2 2023-01-09 07:08:24

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 6,776
Website

Re: [Solved] Razor Blade 14 No Wifi Interface

Does copying this file to /lib/firmware/ath11k/WCN6855/hw2.0/ get things working?

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=215625

Offline

#3 2023-01-14 21:02:38

aflyingpumpkin
Member
Registered: 2021-02-12
Posts: 14

Re: [Solved] Razor Blade 14 No Wifi Interface

Thanks for getting me looking in the right direction! I also needed to copy the file to /lib/firmware/ath11k/WCN6855/hw2.1/ to get things working properly!

Offline

Board footer

Powered by FluxBB