You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2023-02-09 20:38:04
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
[SOLVED] MPV lagging
I am having this problem since more than a year and it occurs quite randomly. The 2. issue is my main problem since a long time and I tried a lot of things but nothing really worked.
1. When there is a travelling in the video (I notice it usually more in an anime), I can see the different frames; as if some frames are skipped and it looks jerky (is this the right word?).
2. Sometime when I pause then unpause, the video-audio isn't synced anymore and the video is delayed, then there is several jumps in the video and it goes back to normal after a dozen seconds. Usually I just go back in time a few seconds and the AV sync is resolved.
My config:
– mpv from the official repos on an Asus laptop
– archlinux with i3-gaps-rounded (and before I had i3-gaps and already had the problem)
– GTX950M with the nvidia driver (and not nouveau)
What I tried:
– I tried mpv -v but nothing special was shown when the 1. issue happened (frame-skipping in travelling)
– I tried --no-config, as well as with several other configs: nothing changed
– Sometime the 2. thing doesn't happen during few videos, sometime it happens a lot. It is quite random and I cannot really predict it. Each time I want to show it to someone or reproduce it, it doesn't happen
– I checked in htop, either the memory nor the CPU seems to be overused. I don't know where the problem could come from. Maybe the graphic card/driver? Maybe the mpv config (but it shouldn't since I tried without config)?
– I managed to capture with mpv -v the 2. issue and this was reported:
[cplayer] Still buffering (buffer went from 0% -> 68%) [0.683333s].
[cplayer] Still buffering (buffer went from 68% -> 42%) [0.426667s].
[cplayer] End buffering (waited 0.626536 secs) [1.108667s].
[cplayer]
[cplayer] Audio/Video desynchronisation detected! Possible reasons include too slow
[cplayer] hardware, temporary CPU spikes, broken drivers, and broken files. Audio
[cplayer] position will not match to the video (see A-V status field).I don't know if one can actually help me with such vague explanations and such random problem but I really start to be fed up with this problem, and I really don't know where to start.
Last edited by kaiserkueche (2023-02-14 16:01:04)
Offline
#2 2023-02-09 21:10:31
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
1. is judder / 2. heavily depends on the video container and whether it's eg. via a network protocol.
For 1. try "mpv -vo=gpu --video-sync=display-resample", for 2. you'll have to elaborate on the video source, but "still buffering" sounds a lot like a slow source (network, optical drive, etc.)
Offline
#3 2023-02-10 20:47:27
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
For 1. I tried "mpv -vo=gpu --video-sync=display-resample" but I still see the judder as usually.
For 2. so my video source is always the files I have on my sdb1: it's an internal DDR (not SSD) of 1TB I use only for storage (my main system is on sda3, a SSD). It's usually mkv files from 1GB to 2GB (25min) in 1080p encoded in HEVC/x265 or x264, with FLAC or AAC audio files. I don't know if this can be of any help for you; but thank you for the quick reply!
Offline
#4 2023-02-10 21:07:30
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
Please post the outputs of
xrandr -q
loginctl session-status | head -32
mpv /path/to/some/porn.mp4
mpv -vo=gpu --video-sync=display-resample /path/to/some/porn.mp4Offline
#5 2023-02-10 21:52:57
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
xrandr -q
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
eDP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 60.02*+ 60.01 59.97 59.96 59.93
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 59.90
1280x960 60.00
1360x768 59.95
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 70.07 60.00
800x600 72.19 75.00 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 75.00 72.81 60.00 59.94
720x400 70.08 loginctl
1 - kaiser (1000)
Since: Fri 2023-02-10 21:31:51 CET; 1h 15min ago
Leader: 552 (login)
Seat: seat0; vc1
TTY: tty1
Service: login; type tty; class user
State: active
Unit: session-1.scope
├─ 552 "login -- kaiser"
├─ 581 -zsh
├─ 755 /bin/sh /usr/bin/startx
├─ 770 xinit /home/kaiser/.xinitrc -- /etc/X11/xinit/xserverrc :0 vt1 -keeptty -auth /tmp/serverauth.84A1zfSpYi
├─ 771 /usr/lib/Xorg -nolisten tcp :0 vt1 -keeptty -auth /tmp/serverauth.84A1zfSpYi
├─ 786 i3
├─ 813 picom --experimental-backend
├─ 815 fcitx5
├─ 819 /opt/discord/Discord
├─ 821 python3 /usr/bin/blugon
├─ 824 keepassxc
├─ 826 syncthing
├─ 828 polybar mybar
├─ 838 /usr/bin/syncthing
├─ 870 "/opt/discord/Discord --type=zygote --no-zygote-sandbox"
├─ 871 "/opt/discord/Discord --type=zygote"
├─ 874 "/opt/discord/Discord --type=zygote"
├─ 899 /bin/sh /usr/bin/xdg-open http://127.0.0.1:8384/
├─ 977 /usr/lib/mozc/mozc_server
├─1027 /usr/lib/firefox/firefox http://127.0.0.1:8384/
├─1041 "/opt/discord/Discord --type=gpu-process --field-trial-handle=13085391612233575576,13517227384273539017,131072 --disable-features=CookiesWithoutSameSiteMustBeSecure,HardwareMediaKeyHandling,MediaSessionService,SameSiteByDefaultCookies,SpareRendererForSitePerProcess,WinRetrieveSuggestionsOnlyOnDemand --enable-crash-reporter=49c602de-272f-4f79-8777-518bcbbe7163,no_channel --global-crash-keys=49c602de-272f-4f79-8777-518bcbbe7163,no_channel,_companyName=Discord Inc.,_productName=Discord,_version=0.0.24 --gpu-preferences=UAAAAAAAAAAgAAAQAAAAAAAAAAAAAAAAAABgAAAAAAAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAgAAAAAAAAACAAAAAAAAAAAAAAAAAAAAAIAAAAAAAAAAgAAAAAAAAACAAAAAAAAAA= --shared-files"
├─1077 "/opt/discord/Discord --type=utility --utility-sub-type=network.mojom.NetworkService --field-trial-handle=13085391612233575576,13517227384273539017,131072 --disable-features=CookiesWithoutSameSiteMustBeSecure,HardwareMediaKeyHandling,MediaSessionService,SameSiteByDefaultCookies,SpareRendererForSitePerProcess,WinRetrieveSuggestionsOnlyOnDemand --lang=en-GB --service-sandbox-type=none --enable-crash-reporter=49c602de-272f-4f79-8777-518bcbbe7163,no_channel --global-crash-keys=49c602de-272f-4f79-8777-518bcbbe7163,no_channel,_companyName=Discord Inc.,_productName=Discord,_version=0.0.24 --shared-files=v8_context_snapshot_data:100"
├─1170 "/opt/discord/Discord --type=renderer --autoplay-policy=no-user-gesture-required --field-trial-handle=13085391612233575576,13517227384273539017,131072 --disable-features=CookiesWithoutSameSiteMustBeSecure,HardwareMediaKeyHandling,MediaSessionService,SameSiteByDefaultCookies,SpareRendererForSitePerProcess,WinRetrieveSuggestionsOnlyOnDemand --lang=en-GB --enable-crash-reporter=49c602de-272f-4f79-8777-518bcbbe7163,no_channel --global-crash-keys=49c602de-272f-4f79-8777-518bcbbe7163,no_channel,_companyName=Discord Inc.,_productName=Discord,_version=0.0.24 --app-path=/opt/discord/resources/app.asar --no-sandbox --no-zygote --num-raster-threads=2 --enable-main-frame-before-activation --renderer-client-id=5 --no-v8-untrusted-code-mitigations --shared-files=v8_context_snapshot_data:100 --enable-node-leakage-in-renderers"
├─1230 /usr/lib/firefox/firefox -contentproc -parentBuildID 20230130183437 -prefsLen 33792 -prefMapSize 233019 -appDir /usr/lib/firefox/browser {bd82cb0a-349f-4fcc-ac5c-3ecb12ed8172} 1027 true socketmpv /path/to/cowboy\ bebop-E01.mkv
(+) Video --vid=1 (mpeg2video 720x480 29.970fps)
(+) Audio --aid=1 --alang=jpn 'Japanese' (ac3 2ch 48000Hz)
Audio --aid=2 --alang=eng (*) 'English' (ac3 2ch 48000Hz)
(+) Subs --sid=1 --slang=eng 'English' (dvd_subtitle)
AO: [pulse] 48000Hz stereo 2ch float
VO: [gpu] 720x480 => 720x540 yuv420pmpv -vo=gpu
Playing: /path/to/Cowboy Bebop - S01E01 - アステロイド・ブルース.mkv
(+) Video --vid=1 (mpeg2video 720x480 29.970fps)
(+) Audio --aid=1 --alang=jpn 'Japanese' (ac3 2ch 48000Hz)
Audio --aid=2 --alang=eng (*) 'English' (ac3 2ch 48000Hz)
(+) Subs --sid=1 --slang=eng 'English' (dvd_subtitle)
AO: [pulse] 48000Hz stereo 2ch float
VO: [gpu] 720x480 => 720x540 yuv420p
(Paused) AV: 00:00:18 / 00:24:37 (1%) A-V: -0.000 DS: 2.350/7 Dropped: 18I don't really know which info you need with the two last but here you have it, i skipped the [autoload] the other files of the folder
Offline
#6 2023-02-10 22:10:07
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
I was mostly interested in the video FPS
A 29.970fps video should cause rare to no judder on a 60Hz output.
What happens if you kill picom?
mpv -vo=gpu
The "--video-sync=display-resample" part is however really important to mitigate the judder.
Since you complained about the audio, try also whether "mpv -ao null" has any impact on the judder (it'll obviously "fix" the audio problems only in a very cynical sense 
Offline
#7 2023-02-10 23:39:39
- WorMzy
- Administrator
- From: Scotland
- Registered: 2010-06-16
- Posts: 12,396
- Website
Re: [SOLVED] MPV lagging
Following on from Seth's suggestions, if null AO works for you, try with `--pulse-latency-hacks yes` or `--ao alsa`. Pulse AO has been major drag on video performance in recent months in my experience.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Online
#8 2023-02-11 00:02:46
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
Okay, now that I understood better what you wanted to know, I actually showed you the input with an old 720p anime, so I took something more recent where I noticed the problem and here it's more 23,9fps; which maybe changes something?
mpv normal
(+) Video --vid=1 (*) '1080p-x264/Hi10P [JPBD | ANK-Raws]' (h264 1920x1080 23.976fps)
(+) Audio --aid=2 --alang=jpn 'JPN FLAC 2.0 [JPBD | ANK-Raws]' (flac 2ch 48000Hz)
AO: [pulse] 48000Hz stereo 2ch s16
VO: [gpu] 1920x1080 yuv420p10
## OR THIS FILE ##
(+) Video --vid=1 (*) (h264 1920x1080 23.976fps)
(+) Audio --aid=2 --alang=jpn (flac 2ch 48000Hz)
AO: [pulse] 48000Hz stereo 2ch s16
VO: [gpu] 1920x1080 yuv420pmpv --vo=gpu
(+) Video --vid=1 (*) '1080p-x264/Hi10P [JPBD | ANK-Raws]' (h264 1920x1080 23.976fps)
(+) Audio --aid=2 --alang=jpn 'JPN FLAC 2.0 [JPBD | ANK-Raws]' (flac 2ch 48000Hz)
AO: [pulse] 48000Hz stereo 2ch s16
VO: [gpu] 1920x1080 yuv420p10
## OR THIS FILE ##
(+) Video --vid=1 (*) (h264 1920x1080 23.976fps)
(+) Audio --aid=2 --alang=jpn (flac 2ch 48000Hz)
AO: [pulse] 48000Hz stereo 2ch s16
VO: [gpu] 1920x1080 yuv420pSo I tried without picom (and the vo=gpu+video-sync). There seem to be less judder, but I have horizontal screen tearing problem, that I remembered also having struggeled with, and resolved it by adding "backend="glx"; vsync=true;" in picom if I remember correctely.
I tried with "mpv-ao null" and, sadly, it doesn't seem to change anything with the judder.
Offline
#9 2023-02-11 07:52:14
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
Judder (vsync on) or tearing (vsync off) will be inavoidable when playing videos that don't fit the output refresh rate, but resampling the video is meant to deal with that.
Since you keep posting "mpv --vo=gpu" I'll therefore re-stress that
seth wrote:
The "--video-sync=display-resample" part is however really important to mitigate the judder.
"--vo=gpu" does actually nothing (as it's the default and you didn't change that, I just needed to ensure it was used, because resampling doesn't work w/ all output modes)
Also please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Offline
#10 2023-02-11 21:57:04
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
seth wrote:
Since you keep posting "mpv --vo=gpu" I'll therefore re-stress …
My bad, each time I was talking about "mpv --vo=gpu" I was using the whole command with the "--video-sync" but I omitted it in the report here; sorry I wasn't exhaustive enough. So yes, even though I used the "--video-sync=display-resample" the judder didn't seemed fully gone.
Here you have my Xorg.0.log. I don't know exactely what you need so I post the full log but it's a bit long:
[ 41.364]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 41.364] Current Operating System: Linux arich 6.1.10-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 06 Feb 2023 09:28:04 +0000 x86_64
[ 41.364] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 41.364]
[ 41.365] Current version of pixman: 0.42.2
[ 41.365] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 41.365] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.366] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 11 22:43:49 2023
[ 41.370] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 41.371] (==) No Layout section. Using the first Screen section.
[ 41.371] (==) No screen section available. Using defaults.
[ 41.371] (**) |-->Screen "Default Screen Section" (0)
[ 41.371] (**) | |-->Monitor "<default monitor>"
[ 41.372] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 41.372] (==) Automatically adding devices
[ 41.372] (==) Automatically enabling devices
[ 41.372] (==) Automatically adding GPU devices
[ 41.372] (==) Automatically binding GPU devices
[ 41.372] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 41.373] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 41.373] Entry deleted from font path.
[ 41.375] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 41.375] Entry deleted from font path.
[ 41.375] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 41.375] Entry deleted from font path.
[ 41.375] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 41.375] Entry deleted from font path.
[ 41.375] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 41.375] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.375] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.375] (II) Module ABI versions:
[ 41.376] X.Org ANSI C Emulation: 0.4
[ 41.376] X.Org Video Driver: 25.2
[ 41.376] X.Org XInput driver : 24.4
[ 41.376] X.Org Server Extension : 10.0
[ 41.378] (++) using VT number 1
[ 41.381] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 41.384] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 41.384] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 41.385] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 41.385] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 41.385] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 41.387] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 41.390] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 41.393] (--) PCI:*(0@0:2:0) 8086:191b:1043:1c9d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 41.393] (--) PCI: (1@0:0:0) 10de:139a:1043:1c9d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 41.394] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 41.394] (II) LoadModule: "glx"
[ 41.395] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.408] (II) Module glx: vendor="X.Org Foundation"
[ 41.408] compiled for 1.21.1.7, module version = 1.0.0
[ 41.408] ABI class: X.Org Server Extension, version 10.0
[ 41.408] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 41.408] loading driver: nvidia
[ 41.408] (==) Matched intel as autoconfigured driver 0
[ 41.408] (==) Matched nvidia as autoconfigured driver 1
[ 41.408] (==) Matched nouveau as autoconfigured driver 2
[ 41.408] (==) Matched nv as autoconfigured driver 3
[ 41.408] (==) Matched modesetting as autoconfigured driver 4
[ 41.408] (==) Matched fbdev as autoconfigured driver 5
[ 41.408] (==) Matched vesa as autoconfigured driver 6
[ 41.408] (==) Assigned the driver to the xf86ConfigLayout
[ 41.408] (II) LoadModule: "intel"
[ 41.409] (WW) Warning, couldn't open module intel
[ 41.409] (EE) Failed to load module "intel" (module does not exist, 0)
[ 41.409] (II) LoadModule: "nvidia"
[ 41.409] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 41.417] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 41.417] compiled for 1.6.99.901, module version = 1.0.0
[ 41.417] Module class: X.Org Video Driver
[ 41.418] (II) LoadModule: "nouveau"
[ 41.419] (WW) Warning, couldn't open module nouveau
[ 41.419] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 41.419] (II) LoadModule: "nv"
[ 41.419] (WW) Warning, couldn't open module nv
[ 41.419] (EE) Failed to load module "nv" (module does not exist, 0)
[ 41.419] (II) LoadModule: "modesetting"
[ 41.419] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 41.423] (II) Module modesetting: vendor="X.Org Foundation"
[ 41.423] compiled for 1.21.1.7, module version = 1.21.1
[ 41.424] Module class: X.Org Video Driver
[ 41.424] ABI class: X.Org Video Driver, version 25.2
[ 41.424] (II) LoadModule: "fbdev"
[ 41.424] (WW) Warning, couldn't open module fbdev
[ 41.424] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 41.424] (II) LoadModule: "vesa"
[ 41.424] (WW) Warning, couldn't open module vesa
[ 41.425] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 41.425] (II) NVIDIA dlloader X Driver 525.89.02 Wed Feb 1 23:14:37 UTC 2023
[ 41.425] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 41.425] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 41.425] (II) modeset(0): using drv /dev/dri/card0
[ 41.425] (II) systemd-logind: releasing fd for 226:1
[ 41.427] (II) Loading sub module "fb"
[ 41.427] (II) LoadModule: "fb"
[ 41.427] (II) Module "fb" already built-in
[ 41.427] (II) Loading sub module "wfb"
[ 41.427] (II) LoadModule: "wfb"
[ 41.427] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 41.429] (II) Module wfb: vendor="X.Org Foundation"
[ 41.429] compiled for 1.21.1.7, module version = 1.0.0
[ 41.429] ABI class: X.Org ANSI C Emulation, version 0.4
[ 41.429] (II) Loading sub module "ramdac"
[ 41.429] (II) LoadModule: "ramdac"
[ 41.429] (II) Module "ramdac" already built-in
[ 41.431] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41.431] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 41.431] (==) modeset(0): RGB weight 888
[ 41.431] (==) modeset(0): Default visual is TrueColor
[ 41.431] (II) Loading sub module "glamoregl"
[ 41.431] (II) LoadModule: "glamoregl"
[ 41.431] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 41.446] (II) Module glamoregl: vendor="X.Org Foundation"
[ 41.446] compiled for 1.21.1.7, module version = 1.0.1
[ 41.446] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.306] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)
[ 42.306] (II) modeset(0): glamor initialized
[ 42.306] (==) modeset(0): VariableRefresh: disabled
[ 42.306] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 42.308] (II) modeset(0): Output eDP-1 has no monitor section
[ 42.308] (II) modeset(0): Output DP-1 has no monitor section
[ 42.312] (II) modeset(0): Output HDMI-1 has no monitor section
[ 42.339] (II) modeset(0): Output HDMI-2 has no monitor section
[ 42.340] (II) modeset(0): EDID for output eDP-1
[ 42.340] (II) modeset(0): Manufacturer: LGD Model: 46f Serial#: 0
[ 42.340] (II) modeset(0): Year: 2014 Week: 0
[ 42.340] (II) modeset(0): EDID Version: 1.4
[ 42.340] (II) modeset(0): Digital Display Input
[ 42.340] (II) modeset(0): 6 bits per channel
[ 42.340] (II) modeset(0): Digital interface is DisplayPort
[ 42.340] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 42.340] (II) modeset(0): Gamma: 2.20
[ 42.340] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 42.340] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.340] (II) modeset(0): First detailed timing is preferred mode
[ 42.340] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 42.340] (II) modeset(0): redX: 0.640 redY: 0.345 greenX: 0.335 greenY: 0.625
[ 42.340] (II) modeset(0): blueX: 0.150 blueY: 0.052 whiteX: 0.313 whiteY: 0.329
[ 42.340] (II) modeset(0): Manufacturer's mask: 0
[ 42.340] (II) modeset(0): Supported detailed timing:
[ 42.340] (II) modeset(0): clock: 138.7 MHz Image Size: 344 x 194 mm
[ 42.340] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 42.340] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 42.340] (II) modeset(0): LG Display
[ 42.340] (II) modeset(0): LP156WF6-SPB5
[ 42.340] (II) modeset(0): EDID (in hex):
[ 42.340] (II) modeset(0): 00ffffffffffff0030e46f0400000000
[ 42.340] (II) modeset(0): 0018010495221378eadc95a35855a026
[ 42.340] (II) modeset(0): 0d505400000001010101010101010101
[ 42.340] (II) modeset(0): 0101010101012e3680a070381f403020
[ 42.340] (II) modeset(0): 350058c21000001a0000000000000000
[ 42.340] (II) modeset(0): 00000000000000000000000000fe004c
[ 42.340] (II) modeset(0): 4720446973706c61790a2020000000fe
[ 42.340] (II) modeset(0): 004c503135365746362d535042350079
[ 42.341] (II) modeset(0): Printing probed modes for output eDP-1
[ 42.341] (II) modeset(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 42.341] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 42.341] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 42.341] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 42.341] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 42.341] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 42.341] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 42.341] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 42.341] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 42.341] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 42.341] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 42.341] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 42.341] (II) modeset(0): EDID for output DP-1
[ 42.345] (II) modeset(0): EDID for output HDMI-1
[ 42.372] (II) modeset(0): EDID for output HDMI-2
[ 42.372] (II) modeset(0): Manufacturer: AUS Model: 23cc Serial#: 16843009
[ 42.372] (II) modeset(0): Year: 2019 Week: 27
[ 42.372] (II) modeset(0): EDID Version: 1.3
[ 42.372] (II) modeset(0): Digital Display Input
[ 42.372] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 42.372] (II) modeset(0): Gamma: 2.20
[ 42.372] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 42.372] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42.372] (II) modeset(0): First detailed timing is preferred mode
[ 42.372] (II) modeset(0): redX: 0.647 redY: 0.341 greenX: 0.318 greenY: 0.618
[ 42.372] (II) modeset(0): blueX: 0.152 blueY: 0.059 whiteX: 0.313 whiteY: 0.329
[ 42.372] (II) modeset(0): Supported established timings:
[ 42.372] (II) modeset(0): 720x400@70Hz
[ 42.372] (II) modeset(0): 640x480@60Hz
[ 42.372] (II) modeset(0): 640x480@72Hz
[ 42.372] (II) modeset(0): 640x480@75Hz
[ 42.372] (II) modeset(0): 800x600@56Hz
[ 42.372] (II) modeset(0): 800x600@60Hz
[ 42.372] (II) modeset(0): 800x600@72Hz
[ 42.372] (II) modeset(0): 800x600@75Hz
[ 42.372] (II) modeset(0): 1024x768@60Hz
[ 42.372] (II) modeset(0): 1024x768@70Hz
[ 42.372] (II) modeset(0): 1024x768@75Hz
[ 42.372] (II) modeset(0): 1280x1024@75Hz
[ 42.372] (II) modeset(0): 1152x864@75Hz
[ 42.372] (II) modeset(0): Manufacturer's mask: 0
[ 42.372] (II) modeset(0): Supported standard timings:
[ 42.372] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 42.372] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 42.372] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 42.372] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 42.372] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 42.372] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 42.372] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 42.372] (II) modeset(0): #7: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 42.372] (II) modeset(0): Supported detailed timing:
[ 42.372] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 42.372] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.372] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.372] (II) modeset(0): Ranges: V min: 48 V max: 76 Hz, H min: 30 H max: 85 kHz, PixClock max 175 MHz
[ 42.372] (II) modeset(0): Monitor name: VZ239
[ 42.372] (II) modeset(0): Serial No: K7LMRS001457
[ 42.372] (II) modeset(0): Supported detailed timing:
[ 42.372] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 42.372] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.372] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.372] (II) modeset(0): Supported detailed timing:
[ 42.372] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 42.372] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.372] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 42.372] (II) modeset(0): Supported detailed timing:
[ 42.372] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
[ 42.372] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 42.372] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 42.372] (II) modeset(0): Supported detailed timing:
[ 42.372] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
[ 42.372] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 42.372] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 42.372] (II) modeset(0): Number of EDID sections to follow: 1
[ 42.372] (II) modeset(0): EDID (in hex):
[ 42.372] (II) modeset(0): 00ffffffffffff0006b3cc2301010101
[ 42.372] (II) modeset(0): 1b1d010380331d78ead905a557519e27
[ 42.372] (II) modeset(0): 0f5054afcf80714f8180818fb3008140
[ 42.372] (II) modeset(0): 9500a9408bc0023a801871382d40582c
[ 42.372] (II) modeset(0): 4500fd1e1100001e000000fd00304c1e
[ 42.372] (II) modeset(0): 5511000a202020202020000000fc0056
[ 42.372] (II) modeset(0): 5a3233390a20202020202020000000ff
[ 42.372] (II) modeset(0): 004b374c4d52533030313435370a014a
[ 42.372] (II) modeset(0): 020315f14a900403011412051f101365
[ 42.372] (II) modeset(0): 030c001000023a801871382d40582c45
[ 42.372] (II) modeset(0): 00fd1e1100001e011d8018711c162058
[ 42.372] (II) modeset(0): 2c2500fd1e1100009e011d007251d01e
[ 42.372] (II) modeset(0): 206e285500fd1e1100001e8c0ad08a20
[ 42.372] (II) modeset(0): e02d10103e9600fd1e11000018000000
[ 42.372] (II) modeset(0): 00000000000000000000000000000000
[ 42.372] (II) modeset(0): 000000000000000000000000000000c0
[ 42.372] (II) modeset(0): Printing probed modes for output HDMI-2
[ 42.372] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 42.372] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 42.372] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 42.372] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 42.372] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 42.372] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 42.372] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1360x768"x59.9 84.96 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 42.372] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 42.372] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42.372] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42.372] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42.372] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.372] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42.372] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 42.372] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 42.372] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.372] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42.372] (II) modeset(0): Output eDP-1 connected
[ 42.372] (II) modeset(0): Output DP-1 disconnected
[ 42.372] (II) modeset(0): Output HDMI-1 disconnected
[ 42.372] (II) modeset(0): Output HDMI-2 connected
[ 42.372] (II) modeset(0): Using spanning desktop for initial modes
[ 42.372] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 42.372] (II) modeset(0): Output HDMI-2 using initial mode 1920x1080 +1920+0
[ 42.372] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 42.372] (==) modeset(0): DPI set to (96, 96)
[ 42.372] (II) Loading sub module "fb"
[ 42.372] (II) LoadModule: "fb"
[ 42.372] (II) Module "fb" already built-in
[ 42.372] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 42.372] (==) NVIDIA(G0): RGB weight 888
[ 42.372] (==) NVIDIA(G0): Default visual is TrueColor
[ 42.372] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 42.375] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 42.375] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 42.375] (**) NVIDIA(G0): Enabling 2D acceleration
[ 42.375] (II) Loading sub module "glxserver_nvidia"
[ 42.375] (II) LoadModule: "glxserver_nvidia"
[ 42.375] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 42.465] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 42.465] compiled for 1.6.99.901, module version = 1.0.0
[ 42.465] Module class: X.Org Server Extension
[ 42.465] (II) NVIDIA GLX Module 525.89.02 Wed Feb 1 23:13:01 UTC 2023
[ 42.467] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 42.469] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce GTX 950M (GM107-A) at PCI:1:0:0
[ 42.469] (II) NVIDIA(G0): (GPU-0)
[ 42.469] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 42.469] (--) NVIDIA(G0): VideoBIOS: 82.07.86.00.20
[ 42.469] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 42.470] (II) NVIDIA(G0): Validated MetaModes:
[ 42.470] (II) NVIDIA(G0): "NULL"
[ 42.470] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 42.470] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 42.470] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 42.576] (==) modeset(0): Backing store enabled
[ 42.576] (==) modeset(0): Silken mouse enabled
[ 42.769] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 42.770] (==) modeset(0): DPMS enabled
[ 42.770] (II) modeset(0): [DRI2] Setup complete
[ 42.770] (II) modeset(0): [DRI2] DRI driver: iris
[ 42.770] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 42.770] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[ 42.770] (II) NVIDIA: access.
[ 42.778] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 42.778] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 42.778] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 42.778] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 42.778] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 42.778] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 42.778] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 42.778] (II) NVIDIA(G0): Config Options in the README.
[ 42.821] (II) NVIDIA(G0): Setting mode "NULL"
[ 42.824] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 42.824] (==) NVIDIA(G0): Backing store enabled
[ 42.824] (==) NVIDIA(G0): Silken mouse enabled
[ 42.824] (==) NVIDIA(G0): DPMS enabled
[ 42.824] (II) Loading sub module "dri2"
[ 42.824] (II) LoadModule: "dri2"
[ 42.824] (II) Module "dri2" already built-in
[ 42.824] (II) NVIDIA(G0): [DRI2] Setup complete
[ 42.824] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 42.824] (II) Initializing extension Generic Event Extension
[ 42.824] (II) Initializing extension SHAPE
[ 42.824] (II) Initializing extension MIT-SHM
[ 42.824] (II) Initializing extension XInputExtension
[ 42.825] (II) Initializing extension XTEST
[ 42.825] (II) Initializing extension BIG-REQUESTS
[ 42.825] (II) Initializing extension SYNC
[ 42.825] (II) Initializing extension XKEYBOARD
[ 42.825] (II) Initializing extension XC-MISC
[ 42.825] (II) Initializing extension SECURITY
[ 42.825] (II) Initializing extension XFIXES
[ 42.825] (II) Initializing extension RENDER
[ 42.825] (II) Initializing extension RANDR
[ 42.825] (II) Initializing extension COMPOSITE
[ 42.826] (II) Initializing extension DAMAGE
[ 42.826] (II) Initializing extension MIT-SCREEN-SAVER
[ 42.826] (II) Initializing extension DOUBLE-BUFFER
[ 42.826] (II) Initializing extension RECORD
[ 42.826] (II) Initializing extension DPMS
[ 42.826] (II) Initializing extension Present
[ 42.826] (II) Initializing extension DRI3
[ 42.826] (II) Initializing extension X-Resource
[ 42.826] (II) Initializing extension XVideo
[ 42.826] (II) Initializing extension XVideo-MotionCompensation
[ 42.826] (II) Initializing extension GLX
[ 42.826] (II) Initializing extension GLX
[ 42.826] (II) Indirect GLX disabled.
[ 42.832] (II) AIGLX: Loaded and initialized iris
[ 42.832] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 42.832] (II) Initializing extension XFree86-VidModeExtension
[ 42.832] (II) Initializing extension XFree86-DGA
[ 42.832] (II) Initializing extension XFree86-DRI
[ 42.832] (II) Initializing extension DRI2
[ 42.832] (II) Initializing extension NV-GLX
[ 42.832] (II) Initializing extension NV-CONTROL
[ 42.833] (II) modeset(0): Damage tracking initialized
[ 42.833] (II) modeset(0): Setting screen physical size to 1016 x 285
[ 42.936] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 42.936] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 42.936] (II) LoadModule: "libinput"
[ 42.936] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 42.940] (II) Module libinput: vendor="X.Org Foundation"
[ 42.940] compiled for 1.21.1.3, module version = 1.2.1
[ 42.940] Module class: X.Org XInput Driver
[ 42.940] ABI class: X.Org XInput driver, version 24.4
[ 42.940] (II) Using input driver 'libinput' for 'Power Button'
[ 42.941] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 46 paused 0
[ 42.941] (**) Power Button: always reports core events
[ 42.941] (**) Option "Device" "/dev/input/event2"
[ 42.947] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 42.948] (II) event2 - Power Button: device is a keyboard
[ 42.948] (II) event2 - Power Button: device removed
[ 42.948] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 42.948] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 42.948] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 42.948] (II) event2 - Power Button: device is a keyboard
[ 42.949] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[ 42.949] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 42.949] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 42.949] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 49 paused 0
[ 42.949] (**) Asus Wireless Radio Control: always reports core events
[ 42.949] (**) Option "Device" "/dev/input/event4"
[ 42.950] (II) event4 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 42.950] (II) event4 - Asus Wireless Radio Control: device is a keyboard
[ 42.950] (II) event4 - Asus Wireless Radio Control: device removed
[ 42.950] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[ 42.950] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 42.951] (II) event4 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 42.951] (II) event4 - Asus Wireless Radio Control: device is a keyboard
[ 42.951] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 42.951] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 42.951] (II) Using input driver 'libinput' for 'Video Bus'
[ 42.952] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 50 paused 0
[ 42.952] (**) Video Bus: always reports core events
[ 42.952] (**) Option "Device" "/dev/input/event12"
[ 42.953] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 42.953] (II) event12 - Video Bus: device is a keyboard
[ 42.953] (II) event12 - Video Bus: device removed
[ 42.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 42.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 42.953] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 42.953] (II) event12 - Video Bus: device is a keyboard
[ 42.954] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 42.954] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 42.954] (II) Using input driver 'libinput' for 'Video Bus'
[ 42.954] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 51 paused 0
[ 42.954] (**) Video Bus: always reports core events
[ 42.954] (**) Option "Device" "/dev/input/event13"
[ 42.955] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 42.955] (II) event13 - Video Bus: device is a keyboard
[ 42.955] (II) event13 - Video Bus: device removed
[ 42.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input13/event13"
[ 42.955] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 42.956] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[ 42.956] (II) event13 - Video Bus: device is a keyboard
[ 42.957] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 42.957] (II) No input driver specified, ignoring this device.
[ 42.957] (II) This device may have been added with another device file.
[ 42.957] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 42.957] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 42.957] (II) Using input driver 'libinput' for 'Sleep Button'
[ 42.957] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 52 paused 0
[ 42.957] (**) Sleep Button: always reports core events
[ 42.957] (**) Option "Device" "/dev/input/event1"
[ 42.958] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 42.958] (II) event1 - Sleep Button: device is a keyboard
[ 42.958] (II) event1 - Sleep Button: device removed
[ 42.958] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 42.958] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 42.959] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 42.959] (II) event1 - Sleep Button: device is a keyboard
[ 42.960] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 110 Gaming Mouse (/dev/input/event6)
[ 42.960] (**) SteelSeries SteelSeries Rival 110 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 42.960] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Rival 110 Gaming Mouse'
[ 43.016] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 53 paused 0
[ 43.016] (**) SteelSeries SteelSeries Rival 110 Gaming Mouse: always reports core events
[ 43.016] (**) Option "Device" "/dev/input/event6"
[ 43.021] (II) event6 - SteelSeries SteelSeries Rival 110 Gaming Mouse: is tagged by udev as: Mouse
[ 43.021] (II) event6 - SteelSeries SteelSeries Rival 110 Gaming Mouse: device is a pointer
[ 43.022] (II) event6 - SteelSeries SteelSeries Rival 110 Gaming Mouse: device removed
[ 43.022] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:1038:1729.0002/input/input6/event6"
[ 43.022] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Rival 110 Gaming Mouse" (type: MOUSE, id 11)
[ 43.022] (**) Option "AccelerationScheme" "none"
[ 43.022] (**) SteelSeries SteelSeries Rival 110 Gaming Mouse: (accel) selected scheme none/0
[ 43.022] (**) SteelSeries SteelSeries Rival 110 Gaming Mouse: (accel) acceleration factor: 2.000
[ 43.022] (**) SteelSeries SteelSeries Rival 110 Gaming Mouse: (accel) acceleration threshold: 4
[ 43.026] (II) event6 - SteelSeries SteelSeries Rival 110 Gaming Mouse: is tagged by udev as: Mouse
[ 43.026] (II) event6 - SteelSeries SteelSeries Rival 110 Gaming Mouse: device is a pointer
[ 43.029] (II) config/udev: Adding input device SteelSeries SteelSeries Rival 110 Gaming Mouse (/dev/input/mouse0)
[ 43.029] (II) No input driver specified, ignoring this device.
[ 43.029] (II) This device may have been added with another device file.
[ 43.031] (II) config/udev: Adding input device SteelSeries SteelSeries Apex 100 Gaming Keyboard (/dev/input/event7)
[ 43.031] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 43.031] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Apex 100 Gaming Keyboard'
[ 43.033] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 54 paused 0
[ 43.033] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard: always reports core events
[ 43.033] (**) Option "Device" "/dev/input/event7"
[ 43.037] (II) event7 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: is tagged by udev as: Keyboard
[ 43.037] (II) event7 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device is a keyboard
[ 43.038] (II) event7 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device removed
[ 43.038] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1038:160E.0003/input/input7/event7"
[ 43.038] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Apex 100 Gaming Keyboard" (type: KEYBOARD, id 12)
[ 43.042] (II) event7 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: is tagged by udev as: Keyboard
[ 43.042] (II) event7 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device is a keyboard
[ 43.045] (II) config/udev: Adding input device SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control (/dev/input/event8)
[ 43.045] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 43.045] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control'
[ 43.047] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 55 paused 0
[ 43.047] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: always reports core events
[ 43.047] (**) Option "Device" "/dev/input/event8"
[ 43.050] (II) event8 - SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.051] (II) event8 - SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: device is a keyboard
[ 43.051] (II) event8 - SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: device removed
[ 43.051] (II) libinput: SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 43.051] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:1038:160E.0005/input/input8/event8"
[ 43.051] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control" (type: MOUSE, id 13)
[ 43.051] (**) Option "AccelerationScheme" "none"
[ 43.051] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 43.051] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 43.051] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 43.055] (II) event8 - SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.055] (II) event8 - SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: device is a keyboard
[ 43.057] (II) config/udev: Adding input device SteelSeries SteelSeries Apex 100 Gaming Keyboard (/dev/input/event9)
[ 43.057] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 43.057] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Apex 100 Gaming Keyboard'
[ 43.059] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 56 paused 0
[ 43.059] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard: always reports core events
[ 43.059] (**) Option "Device" "/dev/input/event9"
[ 43.061] (II) event9 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: is tagged by udev as: Keyboard
[ 43.061] (II) event9 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device is a keyboard
[ 43.062] (II) event9 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device removed
[ 43.062] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:1038:160E.0005/input/input9/event9"
[ 43.062] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Apex 100 Gaming Keyboard" (type: KEYBOARD, id 14)
[ 43.064] (II) event9 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: is tagged by udev as: Keyboard
[ 43.064] (II) event9 - SteelSeries SteelSeries Apex 100 Gaming Keyboard: device is a keyboard
[ 43.065] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event14)
[ 43.065] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 43.065] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 43.066] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 57 paused 0
[ 43.066] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 43.066] (**) Option "Device" "/dev/input/event14"
[ 43.067] (II) event14 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 43.067] (II) event14 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 43.068] (II) event14 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 43.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14/event14"
[ 43.068] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 15)
[ 43.069] (II) event14 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 43.069] (II) event14 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 43.070] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event10)
[ 43.070] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[ 43.070] (II) Using input driver 'libinput' for 'Elan Touchpad'
[ 43.071] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 58 paused 0
[ 43.071] (**) Elan Touchpad: always reports core events
[ 43.071] (**) Option "Device" "/dev/input/event10"
[ 43.072] (II) event10 - Elan Touchpad: is tagged by udev as: Touchpad
[ 43.073] (II) event10 - Elan Touchpad: device is a touchpad
[ 43.073] (II) event10 - Elan Touchpad: device removed
[ 43.073] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1000:00/input/input10/event10"
[ 43.073] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 16)
[ 43.074] (**) Option "AccelerationScheme" "none"
[ 43.074] (**) Elan Touchpad: (accel) selected scheme none/0
[ 43.074] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[ 43.074] (**) Elan Touchpad: (accel) acceleration threshold: 4
[ 43.075] (II) event10 - Elan Touchpad: is tagged by udev as: Touchpad
[ 43.076] (II) event10 - Elan Touchpad: device is a touchpad
[ 43.077] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[ 43.077] (II) No input driver specified, ignoring this device.
[ 43.077] (II) This device may have been added with another device file.
[ 43.077] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 43.077] (II) No input driver specified, ignoring this device.
[ 43.077] (II) This device may have been added with another device file.
[ 43.077] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 43.077] (II) No input driver specified, ignoring this device.
[ 43.077] (II) This device may have been added with another device file.
[ 43.078] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 43.078] (II) No input driver specified, ignoring this device.
[ 43.078] (II) This device may have been added with another device file.
[ 43.078] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 43.078] (II) No input driver specified, ignoring this device.
[ 43.078] (II) This device may have been added with another device file.
[ 43.078] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[ 43.078] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 43.078] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 43.079] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 59 paused 0
[ 43.079] (**) Asus WMI hotkeys: always reports core events
[ 43.079] (**) Option "Device" "/dev/input/event11"
[ 43.079] (II) event11 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 43.080] (II) event11 - Asus WMI hotkeys: device is a keyboard
[ 43.080] (II) event11 - Asus WMI hotkeys: device removed
[ 43.080] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event11"
[ 43.080] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[ 43.080] (II) event11 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 43.080] (II) event11 - Asus WMI hotkeys: device is a keyboard
[ 43.081] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 43.081] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 43.081] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 43.081] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 60 paused 0
[ 43.081] (**) AT Translated Set 2 keyboard: always reports core events
[ 43.081] (**) Option "Device" "/dev/input/event3"
[ 43.082] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 43.082] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 43.083] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 43.083] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 43.083] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 43.084] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 43.084] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 43.085] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 43.085] (II) No input driver specified, ignoring this device.
[ 43.085] (II) This device may have been added with another device file.
[ 43.137] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 43.137] (II) Using input driver 'libinput' for 'SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control'
[ 43.137] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[ 43.137] (**) SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: always reports core events
[ 43.137] (**) Option "Device" "/dev/input/event8"
[ 43.137] (II) libinput: SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control: is a virtual subdevice
[ 43.137] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:1038:160E.0005/input/input8/event8"
[ 43.137] (II) XINPUT: Adding extended input device "SteelSeries SteelSeries Apex 100 Gaming Keyboard Consumer Control" (type: KEYBOARD, id 19)
[ 46.779] (II) modeset(0): EDID vendor "AUS", prod id 9164
[ 46.779] (II) modeset(0): Using EDID range info for horizontal sync
[ 46.779] (II) modeset(0): Using EDID range info for vertical refresh
[ 46.779] (II) modeset(0): Printing DDC gathered Modelines:
[ 46.779] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 46.779] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 46.779] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 46.779] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 46.779] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 46.779] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 46.779] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 46.779] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 46.779] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 46.779] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 46.779] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 46.779] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 46.779] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 46.779] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 46.779] (II) modeset(0): Modeline "(null)"x59.8 84.75 1366 1430 1566 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)
[ 46.829] (II) modeset(0): EDID vendor "AUS", prod id 9164
[ 46.829] (II) modeset(0): Using hsync ranges from config file
[ 46.829] (II) modeset(0): Using vrefresh ranges from config file
[ 46.829] (II) modeset(0): Printing DDC gathered Modelines:
[ 46.829] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 46.829] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 46.829] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 46.829] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 46.829] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 46.829] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 46.829] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 46.829] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 46.829] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 46.829] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 46.829] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 46.829] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 46.829] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 46.829] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 46.829] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 46.829] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 46.830] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 46.830] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 46.830] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 46.830] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 46.830] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 46.830] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 46.830] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 46.830] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 46.830] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 46.830] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 46.830] (II) modeset(0): Modeline "(null)"x59.8 84.75 1366 1430 1566 1776 768 771 781 798 -hsync +vsync (47.7 kHz e)Offline
#11 2023-02-11 22:38:36
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
but it's a bit long
Naaahh, that's harmless.
This is a hybrid graphics system, but you're not trying to prime-run mpv, are you?
You might be hitting https://gitlab.freedesktop.org/xorg/xse … issues/928 ( mentioned in https://wiki.archlinux.org/title/Intel_ … stallation )
Offline
#12 2023-02-11 23:10:32
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
seth wrote:
This is a hybrid graphics system, but you're not trying to prime-run mpv, are you?
What do you mean with hybrid graphics system, what is hybrid?
As far as I know I'm not prime-running mpv, I just use it normally I guess(?) Sorry, I still don't understand much although I'm running Arch since a few years.
seth wrote:
You might be hitting https://gitlab.freedesktop.org/xorg/xse … issues/928 ( mentioned in https://wiki.archlinux.org/title/Intel_ … stallation )
About this: I'm using "nvidia" and not "mesa" as graphic driver and don't have "xf86-video-intel" installed, so you say I could be hitting the same problem although I have a different config?
By the way, I noticed now the Vsync Ratio and Vsync Jitter during watching. Maybe, this can be of any use to you.
Offline
#13 2023-02-11 23:32:49
- topcat01
- Member
- Registered: 2019-09-17
- Posts: 133
Re: [SOLVED] MPV lagging
Your system looks like a "muxless" Optimus setup, i.e., hybrid graphics. The intel card is connected to the outputs, while the nvidia card is "floating".
The vsync jitter does not show up if modesetting is used to just copy frames rendered by the nvidia card (with prime sync enabled). I have a couple of machines like this with various nvidia cards and playback is perfect. You might want to do this (if battery life isn't an issue because nvidia will be horribly inefficient heat and power wise).
Otherwise, just power off the nvidia (950 is not particularly fast) using something like nvidia-xrun or optimus manager and use modesetting with picom glx+vsync. I also use this when on battery and get super efficient perfect playback on said laptops. HTH.
I couldn't tell what is your setup. Could you elaborate?
Offline
#14 2023-02-12 07:00:34
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
According to the xorg log the OPs X11 server is running on the IGP/modesetting and the OP is unaware of the optimus condition or prime-run.
glxinfo -B
prime-run glxinfo -B #I'm using "nvidia" and not "mesa" as graphic driver and don't have "xf86-video-intel" installed, so you say I could be hitting the same problem although I have a different config?
No. With all likelihood you're running *exactly* the configuration in the bugreport, incl. one of the reportedly affected IGP generation.
Edit: and your jitter findings match that bug precisely as well.
Last edited by seth (2023-02-12 07:01:05)
Offline
#15 2023-02-12 22:24:44
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
topcat01 wrote:
I couldn't tell what is your setup. Could you elaborate?
I have a Asus VivoBook Pro N552VW
– i5 6300HQ
– GTX 950M
– 12GB RAM
– main partition on 128GB SSD and most of my files on internal DDR of 1TB
(Is that enough?)
So I think I understood what MUXless is and hybrid graphics. I read some parts of NVIDIA Optimus' and PRIME' wiki article but I don't really understand everything I read. I tried to activate the prime synchronisation with this command 「xrandr --output HDMI-2 --set "PRIME Synchronization" 1」I found on this part https://wiki.archlinux.org/title/PRIME# … ronization but it gave me the following error.
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 36
Current serial number in output stream: 36seth wrote:
According to the xorg log the OPs X11 server is running on the IGP/modesetting and the OP is unaware of the optimus condition or prime-run.
glxinfo -B
prime-run glxinfo -B #
So I tried these two commands, the first gives me the output below, but "prime-run" is not found on my system. I haven't found why it isn't, if it's normal or if I needed some packages.
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) HD Graphics 530 (SKL GT2) (0x191b)
Version: 22.3.4
Accelerated: yes
Video memory: 11861MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 530 (SKL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 22.3.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 22.3.4
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 22.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20topcat01 wrote:
The vsync jitter does not show up if modesetting is used to just copy frames rendered by the nvidia card (with prime sync enabled). […] You might want to do this.
Otherwise, just power off the nvidia using something like nvidia-xrun or optimus manager and use modesetting with picom glx+vsync.
How could I achieve the two different solutions concretely? As I said, I don't understand much about it.
Again, thanks a lot to both of you for the time you spend helping me!
Offline
#16 2023-02-13 00:24:06
- topcat01
- Member
- Registered: 2019-09-17
- Posts: 133
Re: [SOLVED] MPV lagging
I think the easiest way would be to try with Intel only. Optionally in this case the nvidia card can be disabled and powered down to reduce power consumption and heat using either optimus manager or nvidia-xrun. Your nvidia card is too old to support the new dynamic power management features, so powering it off completely is the way to go if you do not need it, at least for testing. However, it is not necessary to disable the nvidia card for the steps below, as long as it not used in any way. This is the case if you delete all config files and also remove the intel ddx. So, only use modesetting.
For the intel only case, keep using modesetting, but use picom with:
glx backend.
vsync.
Do not unredirect full screen windows.
Set frame opacity = 1.0 (otherwise there is an issue with mpv).
The picom default configuration documents these options, so just set them by editing the file. I usually turn off all transparency and fading effects. Next, try running a video using:
mpv --video-sync=display-resample --fullscreen=yes --hwdec=auto file.mkvhwdec is optional but useful if supported. In addition to the OSD, the command line output for mpv shows the number of mistimed frames which cause jitter as DS:x/y where x is the ratio between your screen's refresh rate and the video frame rate, while y is the number of mistimed frames which is what we are interested in. Ideally x should be an integer for perfect motion and indeed I run my screens at 2x the frame rate whenever possible while playing video. y should not be increasing with time; a small number of mistimed frames while starting up, resizing the mpv window, or transitioning to or from full screen mode is normal.
Last edited by topcat01 (2023-02-13 00:25:05)
Offline
#17 2023-02-13 03:59:14
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
I think the easiest way would be to try with Intel only.
The OP *is* effectively running on the intel chip only.
So, only use modesetting.
The modesetting driver is claimed to cause the jitter spikes.
but use picom with
The OP wrote:
So I tried without picom (and the vo=gpu+video-sync). There seem to be less judder, but I have horizontal screen tearing problem, that I remembered also having struggeled with, and resolved it by adding "backend="glx"; vsync=true;" in picom if I remember correctely.
--
the first gives me the output below, but "prime-run" is not found on my system
https://archlinux.org/packages/extra/any/nvidia-prime/
https://man.archlinux.org/man/core/pacman/pacman.8.en - see "--files"
Install xf86-video-intel, restart X11 and see whether that has impact on the situation.
Post an updated xorg log.
Offline
#18 2023-02-13 20:32:07
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
My updated Xorg.0.log after installinf xf86-video-intel and restarting:
[ 266.112]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[ 266.122] Current Operating System: Linux arich 6.1.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 09 Feb 2023 20:06:08 +0000 x86_64
[ 266.122] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
[ 266.125]
[ 266.128] Current version of pixman: 0.42.2
[ 266.134] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 266.134] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 266.141] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 21:20:44 2023
[ 266.142] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 266.142] (==) No Layout section. Using the first Screen section.
[ 266.142] (==) No screen section available. Using defaults.
[ 266.142] (**) |-->Screen "Default Screen Section" (0)
[ 266.142] (**) | |-->Monitor "<default monitor>"
[ 266.142] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 266.142] (==) Automatically adding devices
[ 266.142] (==) Automatically enabling devices
[ 266.142] (==) Automatically adding GPU devices
[ 266.142] (==) Automatically binding GPU devices
[ 266.142] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 266.142] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 266.142] Entry deleted from font path.
[ 266.142] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 266.142] Entry deleted from font path.
[ 266.142] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 266.142] Entry deleted from font path.
[ 266.142] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 266.142] Entry deleted from font path.
[ 266.142] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 266.142] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 266.142] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 266.142] (II) Module ABI versions:
[ 266.142] X.Org ANSI C Emulation: 0.4
[ 266.142] X.Org Video Driver: 25.2
[ 266.142] X.Org XInput driver : 24.4
[ 266.142] X.Org Server Extension : 10.0
[ 266.143] (++) using VT number 1
[ 266.144] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 266.145] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 266.145] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 266.145] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 266.146] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 266.146] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 266.146] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 266.147] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 266.149] (--) PCI:*(0@0:2:0) 8086:191b:1043:1c9d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 266.149] (--) PCI: (1@0:0:0) 10de:139a:1043:1c9d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 266.149] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 266.149] (II) LoadModule: "glx"
[ 266.149] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 266.150] (II) Module glx: vendor="X.Org Foundation"
[ 266.150] compiled for 1.21.1.7, module version = 1.0.0
[ 266.150] ABI class: X.Org Server Extension, version 10.0
[ 266.150] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 266.150] loading driver: nvidia
[ 266.150] (==) Matched intel as autoconfigured driver 0
[ 266.150] (==) Matched nvidia as autoconfigured driver 1
[ 266.150] (==) Matched nouveau as autoconfigured driver 2
[ 266.150] (==) Matched nv as autoconfigured driver 3
[ 266.150] (==) Matched modesetting as autoconfigured driver 4
[ 266.150] (==) Matched fbdev as autoconfigured driver 5
[ 266.150] (==) Matched vesa as autoconfigured driver 6
[ 266.150] (==) Assigned the driver to the xf86ConfigLayout
[ 266.150] (II) LoadModule: "intel"
[ 266.150] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 266.150] (II) Module intel: vendor="X.Org Foundation"
[ 266.150] compiled for 1.21.1.6, module version = 2.99.917
[ 266.150] Module class: X.Org Video Driver
[ 266.150] ABI class: X.Org Video Driver, version 25.2
[ 266.150] (II) LoadModule: "nvidia"
[ 266.150] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 266.151] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 266.151] compiled for 1.6.99.901, module version = 1.0.0
[ 266.151] Module class: X.Org Video Driver
[ 266.151] (II) LoadModule: "nouveau"
[ 266.151] (WW) Warning, couldn't open module nouveau
[ 266.151] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 266.151] (II) LoadModule: "nv"
[ 266.151] (WW) Warning, couldn't open module nv
[ 266.151] (EE) Failed to load module "nv" (module does not exist, 0)
[ 266.151] (II) LoadModule: "modesetting"
[ 266.151] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 266.151] (II) Module modesetting: vendor="X.Org Foundation"
[ 266.151] compiled for 1.21.1.7, module version = 1.21.1
[ 266.151] Module class: X.Org Video Driver
[ 266.151] ABI class: X.Org Video Driver, version 25.2
[ 266.151] (II) LoadModule: "fbdev"
[ 266.152] (WW) Warning, couldn't open module fbdev
[ 266.152] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 266.152] (II) LoadModule: "vesa"
[ 266.152] (WW) Warning, couldn't open module vesa
[ 266.152] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 266.152] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 266.152] (II) intel: Driver for Intel(R) HD Graphics
[ 266.152] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 266.152] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 266.152] (II) NVIDIA dlloader X Driver 525.89.02 Wed Feb 1 23:14:37 UTC 2023
[ 266.152] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 266.152] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 266.152] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 266.152] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[ 266.152] (WW) Falling back to old probe method for modesetting
[ 266.152] (II) systemd-logind: releasing fd for 226:1
[ 266.153] (II) Loading sub module "fb"
[ 266.153] (II) LoadModule: "fb"
[ 266.153] (II) Module "fb" already built-in
[ 266.153] (II) Loading sub module "wfb"
[ 266.153] (II) LoadModule: "wfb"
[ 266.153] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 266.153] (II) Module wfb: vendor="X.Org Foundation"
[ 266.153] compiled for 1.21.1.7, module version = 1.0.0
[ 266.153] ABI class: X.Org ANSI C Emulation, version 0.4
[ 266.153] (II) Loading sub module "ramdac"
[ 266.153] (II) LoadModule: "ramdac"
[ 266.153] (II) Module "ramdac" already built-in
[ 266.154] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 530
[ 266.154] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 266.154] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 266.154] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 266.154] (==) intel(0): RGB weight 888
[ 266.154] (==) intel(0): Default visual is TrueColor
[ 266.154] (II) intel(0): Output eDP1 has no monitor section
[ 266.155] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 266.155] (II) intel(0): Enabled output eDP1
[ 266.155] (II) intel(0): Output DP1 has no monitor section
[ 266.155] (II) intel(0): Enabled output DP1
[ 266.155] (II) intel(0): Output HDMI1 has no monitor section
[ 266.155] (II) intel(0): Enabled output HDMI1
[ 266.155] (II) intel(0): Output HDMI2 has no monitor section
[ 266.155] (II) intel(0): Enabled output HDMI2
[ 266.155] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 266.155] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 266.155] (II) intel(0): Enabled output VIRTUAL1
[ 266.155] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 266.155] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 1
[ 266.155] (==) intel(0): TearFree enabled
[ 266.155] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 266.155] (==) intel(0): DPI set to (96, 96)
[ 266.155] (II) Loading sub module "dri3"
[ 266.155] (II) LoadModule: "dri3"
[ 266.155] (II) Module "dri3" already built-in
[ 266.155] (II) Loading sub module "dri2"
[ 266.155] (II) LoadModule: "dri2"
[ 266.155] (II) Module "dri2" already built-in
[ 266.155] (II) Loading sub module "present"
[ 266.155] (II) LoadModule: "present"
[ 266.155] (II) Module "present" already built-in
[ 266.155] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 266.155] (==) NVIDIA(G0): RGB weight 888
[ 266.155] (==) NVIDIA(G0): Default visual is TrueColor
[ 266.155] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 266.155] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 266.155] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 266.155] (**) NVIDIA(G0): Enabling 2D acceleration
[ 266.155] (II) Loading sub module "glxserver_nvidia"
[ 266.155] (II) LoadModule: "glxserver_nvidia"
[ 266.155] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 266.162] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 266.162] compiled for 1.6.99.901, module version = 1.0.0
[ 266.162] Module class: X.Org Server Extension
[ 266.162] (II) NVIDIA GLX Module 525.89.02 Wed Feb 1 23:13:01 UTC 2023
[ 266.162] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 266.368] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce GTX 950M (GM107-A) at PCI:1:0:0
[ 266.368] (II) NVIDIA(G0): (GPU-0)
[ 266.368] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 266.368] (--) NVIDIA(G0): VideoBIOS: 82.07.86.00.20
[ 266.368] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 266.368] (II) NVIDIA(G0): Validated MetaModes:
[ 266.368] (II) NVIDIA(G0): "NULL"
[ 266.368] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 266.368] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 266.368] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 266.368] (II) UnloadModule: "modesetting"
[ 266.369] (II) Unloading modesetting
[ 266.369] (II) intel(0): SNA initialized with Skylake (gen9) backend
[ 266.369] (==) intel(0): Backing store enabled
[ 266.369] (==) intel(0): Silken mouse enabled
[ 266.369] (II) intel(0): HW Cursor enabled
[ 266.369] (==) intel(0): DPMS enabled
[ 266.369] (==) intel(0): Display hotplug detection enabled
[ 266.369] (II) intel(0): [DRI2] Setup complete
[ 266.369] (II) intel(0): [DRI2] DRI driver: i965
[ 266.369] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 266.369] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 266.369] (II) intel(0): hardware support for Present enabled
[ 266.369] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[ 266.369] (II) NVIDIA: access.
[ 266.372] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 266.372] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 266.372] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 266.372] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 266.372] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 266.372] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 266.372] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 266.372] (II) NVIDIA(G0): Config Options in the README.
[ 266.393] (II) NVIDIA(G0): Setting mode "NULL"
[ 266.395] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 266.395] (==) NVIDIA(G0): Backing store enabled
[ 266.395] (==) NVIDIA(G0): Silken mouse enabled
[ 266.395] (==) NVIDIA(G0): DPMS enabled
[ 266.395] (II) Loading sub module "dri2"
[ 266.395] (II) LoadModule: "dri2"
[ 266.395] (II) Module "dri2" already built-in
[ 266.395] (II) NVIDIA(G0): [DRI2] Setup complete
[ 266.395] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 266.395] (II) Initializing extension Generic Event Extension
[ 266.395] (II) Initializing extension SHAPE
[ 266.395] (II) Initializing extension MIT-SHM
[ 266.395] (II) Initializing extension XInputExtension
[ 266.395] (II) Initializing extension XTEST
[ 266.395] (II) Initializing extension BIG-REQUESTS
[ 266.396] (II) Initializing extension SYNC
[ 266.396] (II) Initializing extension XKEYBOARD
[ 266.396] (II) Initializing extension XC-MISC
[ 266.396] (II) Initializing extension SECURITY
[ 266.396] (II) Initializing extension XFIXES
[ 266.396] (II) Initializing extension RENDER
[ 266.396] (II) Initializing extension RANDR
[ 266.396] (II) Initializing extension COMPOSITE
[ 266.396] (II) Initializing extension DAMAGE
[ 266.396] (II) Initializing extension MIT-SCREEN-SAVER
[ 266.396] (II) Initializing extension DOUBLE-BUFFER
[ 266.397] (II) Initializing extension RECORD
[ 266.397] (II) Initializing extension DPMS
[ 266.397] (II) Initializing extension Present
[ 266.397] (II) Initializing extension DRI3
[ 266.397] (II) Initializing extension X-Resource
[ 266.397] (II) Initializing extension XVideo
[ 266.397] (II) Initializing extension XVideo-MotionCompensation
[ 266.397] (II) Initializing extension GLX
[ 266.397] (II) Initializing extension GLX
[ 266.397] (II) Indirect GLX disabled.
[ 266.397] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 266.397] (EE) AIGLX error: unable to load driver i965
[ 266.420] (II) IGLX: Loaded and initialized swrast
[ 266.420] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 266.420] (II) Initializing extension XFree86-VidModeExtension
[ 266.420] (II) Initializing extension XFree86-DGA
[ 266.420] (II) Initializing extension XFree86-DRI
[ 266.420] (II) Initializing extension DRI2
[ 266.420] (II) Initializing extension NV-GLX
[ 266.420] (II) Initializing extension NV-CONTROL
[ 266.422] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 266.434] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 1, position (0, 0), rotation normal, reflection none
[ 266.448] (II) intel(0): Setting screen physical size to 508 x 285
[ 266.477] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 266.477] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 266.477] (II) LoadModule: "libinput"
[ 266.477] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 266.478] (II) Module libinput: vendor="X.Org Foundation"
[ 266.478] compiled for 1.21.1.3, module version = 1.2.1
[ 266.478] Module class: X.Org XInput Driver
[ 266.478] ABI class: X.Org XInput driver, version 24.4
[ 266.478] (II) Using input driver 'libinput' for 'Power Button'
[ 266.479] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 39 paused 0
[ 266.479] (**) Power Button: always reports core events
[ 266.479] (**) Option "Device" "/dev/input/event2"
[ 266.480] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 266.480] (II) event2 - Power Button: device is a keyboard
[ 266.480] (II) event2 - Power Button: device removed
[ 266.480] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 266.480] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 266.481] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 266.481] (II) event2 - Power Button: device is a keyboard
[ 266.481] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[ 266.481] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 266.481] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 266.482] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 42 paused 0
[ 266.482] (**) Asus Wireless Radio Control: always reports core events
[ 266.482] (**) Option "Device" "/dev/input/event4"
[ 266.483] (II) event4 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 266.483] (II) event4 - Asus Wireless Radio Control: device is a keyboard
[ 266.483] (II) event4 - Asus Wireless Radio Control: device removed
[ 266.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[ 266.483] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 266.483] (II) event4 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 266.483] (II) event4 - Asus Wireless Radio Control: device is a keyboard
[ 266.484] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 266.484] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 266.484] (II) Using input driver 'libinput' for 'Video Bus'
[ 266.485] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 43 paused 0
[ 266.485] (**) Video Bus: always reports core events
[ 266.485] (**) Option "Device" "/dev/input/event11"
[ 266.485] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 266.485] (II) event11 - Video Bus: device is a keyboard
[ 266.485] (II) event11 - Video Bus: device removed
[ 266.485] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[ 266.485] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 266.486] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 266.486] (II) event11 - Video Bus: device is a keyboard
[ 266.487] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 266.487] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 266.487] (II) Using input driver 'libinput' for 'Video Bus'
[ 266.487] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 44 paused 0
[ 266.487] (**) Video Bus: always reports core events
[ 266.487] (**) Option "Device" "/dev/input/event12"
[ 266.488] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 266.488] (II) event12 - Video Bus: device is a keyboard
[ 266.488] (II) event12 - Video Bus: device removed
[ 266.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input12/event12"
[ 266.488] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 266.489] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 266.489] (II) event12 - Video Bus: device is a keyboard
[ 266.490] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 266.490] (II) No input driver specified, ignoring this device.
[ 266.490] (II) This device may have been added with another device file.
[ 266.490] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 266.490] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 266.490] (II) Using input driver 'libinput' for 'Sleep Button'
[ 266.491] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 45 paused 0
[ 266.491] (**) Sleep Button: always reports core events
[ 266.491] (**) Option "Device" "/dev/input/event1"
[ 266.491] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 266.491] (II) event1 - Sleep Button: device is a keyboard
[ 266.491] (II) event1 - Sleep Button: device removed
[ 266.491] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 266.491] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 266.492] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 266.492] (II) event1 - Sleep Button: device is a keyboard
[ 266.493] (II) config/udev: Adding input device USB2.0 HD UVC WebCam: USB2.0 HD (/dev/input/event10)
[ 266.493] (**) USB2.0 HD UVC WebCam: USB2.0 HD: Applying InputClass "libinput keyboard catchall"
[ 266.493] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam: USB2.0 HD'
[ 266.494] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 46 paused 0
[ 266.494] (**) USB2.0 HD UVC WebCam: USB2.0 HD: always reports core events
[ 266.494] (**) Option "Device" "/dev/input/event10"
[ 266.495] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 266.495] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 266.495] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device removed
[ 266.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10/event10"
[ 266.495] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam: USB2.0 HD" (type: KEYBOARD, id 11)
[ 266.496] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: is tagged by udev as: Keyboard
[ 266.496] (II) event10 - USB2.0 HD UVC WebCam: USB2.0 HD: device is a keyboard
[ 266.497] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 266.497] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 266.497] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 266.553] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 47 paused 0
[ 266.554] (**) USB Optical Mouse: always reports core events
[ 266.554] (**) Option "Device" "/dev/input/event5"
[ 266.558] (II) event5 - USB Optical Mouse: is tagged by udev as: Mouse
[ 266.558] (II) event5 - USB Optical Mouse: device is a pointer
[ 266.559] (II) event5 - USB Optical Mouse: device removed
[ 266.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:192F:0416.0001/input/input5/event5"
[ 266.559] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12)
[ 266.559] (**) Option "AccelerationScheme" "none"
[ 266.559] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 266.559] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 266.559] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 266.563] (II) event5 - USB Optical Mouse: is tagged by udev as: Mouse
[ 266.564] (II) event5 - USB Optical Mouse: device is a pointer
[ 266.566] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 266.566] (II) No input driver specified, ignoring this device.
[ 266.566] (II) This device may have been added with another device file.
[ 266.568] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event6)
[ 266.568] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 266.568] (II) Using input driver 'libinput' for 'CHICONY HP Basic USB Keyboard'
[ 266.570] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 48 paused 0
[ 266.570] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 266.570] (**) Option "Device" "/dev/input/event6"
[ 266.574] (II) event6 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 266.574] (II) event6 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 266.575] (II) event6 - CHICONY HP Basic USB Keyboard: device removed
[ 266.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.4/1-6.4:1.0/0003:03F0:0024.0002/input/input6/event6"
[ 266.575] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 13)
[ 266.579] (II) event6 - CHICONY HP Basic USB Keyboard: is tagged by udev as: Keyboard
[ 266.580] (II) event6 - CHICONY HP Basic USB Keyboard: device is a keyboard
[ 266.581] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event8)
[ 266.582] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[ 266.582] (II) Using input driver 'libinput' for 'Elan Touchpad'
[ 266.583] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 49 paused 0
[ 266.583] (**) Elan Touchpad: always reports core events
[ 266.583] (**) Option "Device" "/dev/input/event8"
[ 266.585] (II) event8 - Elan Touchpad: is tagged by udev as: Touchpad
[ 266.589] (II) event8 - Elan Touchpad: device is a touchpad
[ 266.589] (II) event8 - Elan Touchpad: device removed
[ 266.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1000:00/input/input8/event8"
[ 266.590] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 14)
[ 266.593] (**) Option "AccelerationScheme" "none"
[ 266.593] (**) Elan Touchpad: (accel) selected scheme none/0
[ 266.593] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[ 266.593] (**) Elan Touchpad: (accel) acceleration threshold: 4
[ 266.595] (II) event8 - Elan Touchpad: is tagged by udev as: Touchpad
[ 266.598] (II) event8 - Elan Touchpad: device is a touchpad
[ 266.600] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[ 266.600] (II) No input driver specified, ignoring this device.
[ 266.600] (II) This device may have been added with another device file.
[ 266.601] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 266.601] (II) No input driver specified, ignoring this device.
[ 266.601] (II) This device may have been added with another device file.
[ 266.602] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 266.602] (II) No input driver specified, ignoring this device.
[ 266.602] (II) This device may have been added with another device file.
[ 266.603] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 266.603] (II) No input driver specified, ignoring this device.
[ 266.603] (II) This device may have been added with another device file.
[ 266.604] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 266.604] (II) No input driver specified, ignoring this device.
[ 266.604] (II) This device may have been added with another device file.
[ 266.605] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 266.605] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 266.605] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 266.606] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[ 266.606] (**) Asus WMI hotkeys: always reports core events
[ 266.606] (**) Option "Device" "/dev/input/event9"
[ 266.608] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 266.608] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 266.608] (II) event9 - Asus WMI hotkeys: device removed
[ 266.608] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event9"
[ 266.608] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[ 266.610] (II) event9 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 266.610] (II) event9 - Asus WMI hotkeys: device is a keyboard
[ 266.611] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 266.611] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 266.611] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 266.612] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 51 paused 0
[ 266.612] (**) AT Translated Set 2 keyboard: always reports core events
[ 266.612] (**) Option "Device" "/dev/input/event3"
[ 266.613] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 266.613] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 266.615] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 266.615] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 266.615] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 266.616] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 266.616] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 266.618] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 266.618] (II) No input driver specified, ignoring this device.
[ 266.618] (II) This device may have been added with another device file.
[ 266.883] (II) intel(0): resizing framebuffer to 3840x1080
[ 266.915] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (1920, 0), rotation normal, reflection none
[ 266.955] (II) intel(0): EDID vendor "LGD", prod id 1135
[ 266.955] (II) intel(0): Printing DDC gathered Modelines:
[ 266.955] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)I have the feeling it seems better for the juter when watching scenes with travelling, but I'm still not sure if it is resolved.
Do the Vsync Ratio and Vsync Jitter graphics (shown when "i" in opened mpv) show the number of frame skipped; or is there any way to fact check if the jitter still happens? Because just by feeling isn't really objective.
seth wrote:
I managed to run prime-run; here is the output of "prime-run glxinfo -B"
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Memory info (GL_NVX_gpu_memory_info):
Dedicated video memory: 2048 MB
Total available memory: 2048 MB
Currently available dedicated video memory: 1995 MB
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: NVIDIA GeForce GTX 950M/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 525.89.02
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6.0 NVIDIA 525.89.02
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 525.89.02
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20It also seems better, maybe resolved with prime-run but as I said above, I'd like to fact check it.
Offline
#19 2023-02-13 21:06:03
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
Do the Vsync Ratio and Vsync Jitter graphics (shown when "i" in opened mpv) show the number of frame skipped; or is there any way to fact check if the jitter still happens?
No. https://en.wikipedia.org/wiki/Jitter
It's the deviation from the ideal.
The lower the number, the better. The bigger, the more visible judder you'll get.
Comparing them among the drivers should™ tell you whether xf86-video-intel improved anything here.
Offline
#20 2023-02-13 21:38:18
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
Apparently it's not really resolved, I still see judder when there is a fast travelling (when I said earlier that I didn't notice anything, it's because it was a slow travelling).
I will check tomorrow by watching on another computer if this particular judder on the fast travelling comes from the video itself or not.
– without "prime-run" (and with vo=gpu video-sync=display-resample fullscreen=yes hwdec=auto), the Vsync Jitter stabilises at 0.1.
– with "prime-run", the Vsync is at approx 0.0 but goes evey 5 seconds up to 0.2.
I don't know which would be the best in this case.
I uninstalled xf86-video-intel to try without and
– without "prime-run" it fluctuates a lot between 0.8 and 0.2
– with "prime-run" it seems to stabilize between 0.27 and 0.35 or even 0.4.
So the driver xf-86-video-intel seems to have improved the situation, but
– I still have judder
– I don't know if it's better with or without "prime-run"
Offline
#21 2023-02-14 07:47:31
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
prime-run causes an indirection and depends on prime sync to work (which can not be relied on), so you can skip those tests for the moment.
Worst case is that mpv doesn't even know the actual vblank signal.
https://www.youtube.com/results?search_ … udder+test
If you have https://archlinux.org/packages/community/any/yt-dlp/ installed you can play a video url (quote it) w/ mpv
mpv -ytdl-raw-options='format="mp4,best[height<1081]"' "https://www.youtube.com/watch?v=ys5MqjzPTag"
mpv -ytdl-raw-options='format="mp4,best[height<1081]"' -vo=gpu --video-sync=display-resample "https://www.youtube.com/watch?v=ys5MqjzPTag"nb. that 24fps is 24fps, it will never have the smoothness of 48fps (the hobbit movies, there're also test videos on yt) or even 60fps.
Offline
#22 2023-02-14 14:48:24
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
kaiserküeche wrote:
I will check tomorrow by watching on another computer if this particular judder on the fast travelling comes from the video itself or not.
I checked on another desktop on Windows with more performances with several programs: this particular travelling comes from the encoding/bitrate of the video.
So this issue might be resolved.
seth wrote:
If you have https://archlinux.org/packages/community/any/yt-dlp/ installed you can play a video url (quote it) w/ mpv
I have yt-dlp and I have tried, I mainly notice the faster horizontal lines that judder a little bit; maybe it is because of the 24fps. I'm wondering if the 2kbps bitrate of my file is also a factor of juddering.
I tried both with and without "--video-sync=display-resample" and I don't feel any difference. I will still keep using this config because it can only be better with.
Do you think that this kind of issue can be soften by using some shaders or specific configs?
Anyway, the remaining unresolved things of the issue 1. seem to be linked to the files, so I guess this case is closed(?)
About the issue 2., it didn't happen again so I guess it's resolved. As I said at the beginning, I don't know how to trigger it. So in the worst case if it happens again in the next month I might come back here.
Again, a lot of thanks for your time and help with this.
Offline
#23 2023-02-14 15:25:26
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,659
Re: [SOLVED] MPV lagging
so I guess this case is closed(?)
Hopefully, we're approaching the end of my wits
I'm wondering if the 2kbps bitrate of my file is also a factor of juddering.
This is an mp2 video w/ 2048 bits per second???
Sure it's not 2Mbps? That'd be more in line w/ eg. transcoded dvd video and is not a problem for any kind of modern hardware at all.
The compression (esp. of an Animé) might have cut the fps in half, though (Animés are often not 24fps anyway or only parts (foreground action) is - because somebody had to draw all of that
Googled up https://gist.github.com/phiresky/4bfcfbbd05b3c2ed8645 for you.
I've no idea whether this works or deletes your video, though.
The youtube test videos should give you a reasonable reflection of your system configuration.
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
Offline
#24 2023-02-14 16:00:32
- kaiserkueche
- Member
- Registered: 2021-09-14
- Posts: 22
Re: [SOLVED] MPV lagging
seth wrote:
This is an mp2 video w/ 2048 bits per second???
Sure it's not 2Mbps? That'd be more in line w/ eg. transcoded dvd video and is not a problem for any kind of modern hardware at all.
My bad, it's a 2 641 kb/s Bit rate, so 2Mbps.
seth wrote:
The compression (esp. of an Animé) might have cut the fps in half, though (Animés are often not 24fps anyway or only parts (foreground action) is - because somebody had to draw all of that wink
Yup, obviously the animation and style implies that it's not 100% fluid; but in the travelling (or at least what I meant by "travelling"), it's just a fix image that moves from right to left, so here, it's not an animation but rather a compression problem as you said (since it's not my mpv config anymore).
seth wrote:
The youtube test videos should give you a reasonable reflection of your system configuration.
So I see a little judder on it, but I guess it can't be helped, I watched the same video on the other desktop and it looked same so it should be due to the 24fps.
Case closed!
Offline
Pages: 1