You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2023-04-03 13:12:48
- Razlo3p
- Member
- Registered: 2017-01-05
- Posts: 8
Bose Qc45 Not Displayed in Pulseaudio
Hello everyone.
I deeply scanned this forum to avoid duplicate entry, but as far as i know i found some similar issues to mine but unfortunatly i was not able to solve this issue.
I have my Bluetooth headphone connected, paired and thrusted by my system, but in the Pulse Audio device list there is no entry for my headphones.
Wich step should i take to solve this?
Last edited by Razlo3p (2023-04-05 07:40:53)
Offline
#2 2023-04-05 07:57:36
- Razlo3p
- Member
- Registered: 2017-01-05
- Posts: 8
Re: Bose Qc45 Not Displayed in Pulseaudio
To further help, i use KDE and this is output of some commant to scan deeper:
lsmod | grep btusb
btusb 77824 0
btrtl 28672 1 btusb
btbcm 24576 1 btusb
btintel 53248 1 btusb
btmtk 16384 1 btusb
bluetooth 1077248 48 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcommsystemctl status bluetooth.service
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; preset: disabled)
Active: active (running) since Wed 2023-04-05 09:38:00 CEST; 14min ago
Docs: man:bluetoothd(8)
Main PID: 21301 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 18985)
Memory: 1.2M
CPU: 53ms
CGroup: /system.slice/bluetooth.service
└─21301 /usr/lib/bluetooth/bluetoothddmesg
[ 97.062967] Bluetooth: RFCOMM TTY layer initialized
[ 97.062975] Bluetooth: RFCOMM socket layer initialized
[ 97.062980] Bluetooth: RFCOMM ver 1.11
[ 100.848562] Bluetooth: hci0: Opcode 0x c03 failed: -110
[ 277.941814] usb 1-11: USB disconnect, device number 4
[ 277.941819] usb 1-11.1: USB disconnect, device number 6
[ 329.761123] Bluetooth: hci0: command 0x0c1a tx timeout
[ 329.761123] Bluetooth: hci0: Opcode 0x c1a failed: -110
[ 338.569117] input: Bose QC45 (AVRCP) as /devices/virtual/input/input22Hope this help.
Last edited by Razlo3p (2023-04-05 08:01:30)
Offline
#3 2023-04-05 08:06:14
- schard
- Forum Moderator
- From: Hannover
- Registered: 2016-05-06
- Posts: 2,145
- Website
Re: Bose Qc45 Not Displayed in Pulseaudio
Your headset appears to be registered as an input (-only) device.
What does pacmd say about the device?
Have you followed these steps?
Inofficial first vice president of the Rust Evangelism Strike Force
Offline
#4 2023-04-05 08:14:21
- Razlo3p
- Member
- Registered: 2017-01-05
- Posts: 8
Re: Bose Qc45 Not Displayed in Pulseaudio
Hello, and thanks for the reply.
If i run: pacmd set-card-profile 0 a2dp_sink
i get the following
No such profile: a2dp_sinkpacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1f.3>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa1130000 irq 128"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
output:analog-surround-21: Analog Surround 2.1 Output (priority 34068, available: unknown)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-40: Analog Surround 4.0 Output (priority 33968, available: unknown)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-41: Analog Surround 4.1 Output (priority 34068, available: unknown)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-50: Analog Surround 5.0 Output (priority 33968, available: unknown)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-51: Analog Surround 5.1 Output (priority 34068, available: unknown)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 38268, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 38333, available: unknown)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (priority 300, available: unknown)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (priority 33133, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 38668, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 38733, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 38468, available: unknown)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 38533, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-surround-40+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1f.3.analog-surround-40/#0: Built-in Audio Analog Surround 4.0
sources:
alsa_output.pci-0000_00_1f.3.analog-surround-40.monitor/#0: Monitor of Built-in Audio Analog Surround 4.0
alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "PHL 273V5"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "PHL 243V5"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"pacmd ls
Memory blocks currently allocated: 14, size: 104.4 KiB.
Memory blocks allocated during the whole lifetime: 131543, size: 286.3 MiB.
Memory blocks imported from other processes: 8, size: 32.0 KiB.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_00_1f.3.analog-surround-41
Default source name: alsa_input.pci-0000_00_1f.3.analog-stereo
Memory blocks of type POOL: 6 allocated/71129 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/40166 accumulated.
Memory blocks of type IMPORTED: 8 allocated/20248 accumulated.
22 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "16.1"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "16.1"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "16.1"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "16.1"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "16.1"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "16.1"
index: 6
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
used: 1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "16.1"
index: 7
name: <module-bluetooth-policy>
argument: <>
used: -1
load once: yes
properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "16.1"
index: 8
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "16.1"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "16.1"
index: 10
name: <module-gsettings>
argument: <>
used: -1
load once: yes
properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "16.1"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "16.1"
index: 12
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "16.1"
index: 13
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "16.1"
index: 14
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "16.1"
index: 15
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "16.1"
index: 16
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "16.1"
index: 17
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "16.1"
index: 18
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "16.1"
index: 19
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "16.1"
index: 20
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "16.1"
index: 21
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "16.1"
1 sink(s) available.
* index: 2
name: <alsa_output.pci-0000_00_1f.3.analog-surround-41>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9039
volume: front-left: 26090 / 40% / -24.00 dB, front-right: 26090 / 40% / -24.00 dB, rear-left: 26090 / 40% / -24.00 dB, rear-right: 26090 / 40% / -24.00 dB, lfe: 26852 / 41% / -23.25 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 9.25 ms
max request: 5 KiB
max rewind: 5 KiB
monitor source: 3
sample spec: s16le 5ch 48000Hz
channel map: front-left,front-right,rear-left,rear-right,lfe
Surround 4.1
used by: 1
linked by: 1
configured latency: 10.67 ms; range is 0.50 .. 1837.50 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC1220 Analog"
alsa.id = "ALC1220 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa1130000 irq 128"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.form_factor = "internal"
device.string = "surround41:0"
device.buffering.buffer_size = "882000"
device.buffering.fragment_size = "441000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-surround-41"
device.profile.description = "Analog Surround 4.1"
device.description = "Built-in Audio Analog Surround 4.1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
active port: <analog-output-lineout>
2 source(s) available.
* index: 1
name: <alsa_input.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 65540 / 100% / 0.00 dB, front-right: 65540 / 100% / 0.00 dB
balance 0.00
base volume: 6554 / 10% / -60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC1220 Analog"
alsa.id = "ALC1220 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa1130000 irq 128"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-rear-mic>
index: 3
name: <alsa_output.pci-0000_00_1f.3.analog-surround-41.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 5 KiB
sample spec: s16le 5ch 48000Hz
channel map: front-left,front-right,rear-left,rear-right,lfe
Surround 4.1
used by: 0
linked by: 0
configured latency: 1837.50 ms; range is 0.50 .. 1837.50 ms
monitor_of: 2
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
device.description = "Monitor of Built-in Audio Analog Surround 4.1"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa1130000 irq 128"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
10 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 16
properties:
application.name = "Login Session 2"
systemd-login.session = "2"
index: 1
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Thunderbird"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "1744"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "thunderbird"
application.language = "en_US.UTF-8"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
application.icon_name = "thunderbird"
index: 2
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "SmartGit"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "24279"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "java"
application.language = "en_US.UTF-8"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 3
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Eclipse"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "24240"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "java"
application.language = "en_US.UTF-8"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 4
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Thunderbird"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "102.9.1"
application.icon_name = "thunderbird"
application.process.id = "1744"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "thunderbird"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 5
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Plasma PA"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.plasma-pa"
application.icon_name = "audio-card"
application.process.id = "848"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 14
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Chromium input"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "26028"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "slack"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
application.icon_name = "slack"
index: 19
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Plasma PA"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.plasma-pa"
application.icon_name = "audio-card"
application.process.id = "26314"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "systemsettings"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 22
driver: <protocol-native.c>
owner module: 9
properties:
application.name = "Google Chrome"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "21838"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "chrome"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
index: 24
driver: <cli.c>
owner module: 21
properties:
application.name = "UNIX socket client"
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1f.3>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xa1130000 irq 128"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "a348"
device.product.name = "Cannon Lake PCH cAVS"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
output:analog-surround-21: Analog Surround 2.1 Output (priority 34068, available: unknown)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-40: Analog Surround 4.0 Output (priority 33968, available: unknown)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-41: Analog Surround 4.1 Output (priority 34068, available: unknown)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:analog-surround-50: Analog Surround 5.0 Output (priority 33968, available: unknown)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 34033, available: unknown)
output:analog-surround-51: Analog Surround 5.1 Output (priority 34068, available: unknown)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 34133, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 38268, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 38333, available: unknown)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (priority 300, available: unknown)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (priority 33133, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 38668, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 38733, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 38468, available: unknown)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 38533, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-surround-41+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1f.3.analog-surround-41/#2: Built-in Audio Analog Surround 4.1
sources:
alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
alsa_output.pci-0000_00_1f.3.analog-surround-41.monitor/#3: Monitor of Built-in Audio Analog Surround 4.1
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "PHL 243V5"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "PHL 273V5"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
1 sink input(s) available.
index: 19
driver: <protocol-native.c>
flags: START_CORKED
state: RUNNING
sink: 2 <alsa_output.pci-0000_00_1f.3.analog-surround-41>
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
muted: no
current latency: 15.33 ms
requested latency: 10.67 ms
sample spec: float32le 2ch 48000Hz
channel map: front-left,front-right
Stereo
resample method: copy
module: 9
client: 22 <Google Chrome>
properties:
application.icon_name = "google-chrome"
media.name = "Playback"
application.name = "Google Chrome"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "21838"
application.process.user = "vabo"
application.process.host = "archlinux"
application.process.binary = "chrome"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "1ec0699ec80b4e7c82c0ce9e4981939b"
application.process.session_id = "2"
module-stream-restore.id = "sink-input-by-application-name:Google Chrome"
0 source output(s) available.
0 cache entrie(s) available.Last edited by Razlo3p (2023-04-05 08:40:59)
Offline
#5 2023-04-05 10:51:21
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,712
Re: Bose Qc45 Not Displayed in Pulseaudio
The audio support isn't loaded at all. pulseaudio-bluetooth appears installed and loaded though. Maybe check whether you'll have more luck with pipewire by replacing pulseaudio with pipewire-pulse
Last edited by V1del (2023-04-05 10:53:30)
Offline
#6 2023-04-05 12:26:30
- Razlo3p
- Member
- Registered: 2017-01-05
- Posts: 8
Re: Bose Qc45 Not Displayed in Pulseaudio
There is a way i can solve the issue without a wolktrough (i mean, i would stick with pulse audio and avoid the circumnavigation of the problem). Most of all for a short period of time it worked, and i was able to use bluetooth headseat as input and output. After an update this is no more.
Offline
#7 2023-04-05 12:43:57
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,712
Re: Bose Qc45 Not Displayed in Pulseaudio
Update of what? Kernel/bluez/pulseaudio? Can you test the LTS kernel/downgrade to a known working kernel? linux-firmware might also be a candidate. Sometimes bluetooth state can get wonky and you can try completely resetting that by deleting /var/lib/bluetooth and re-pairing the device.
Offline
#8 2023-04-05 12:57:10
- Razlo3p
- Member
- Registered: 2017-01-05
- Posts: 8
Re: Bose Qc45 Not Displayed in Pulseaudio
The whole 3. I updated and i remember that kerne, pulse and bluez where updated. But unfortunately i can't remember the version i started from so i cannot downgrade.
I'll try your hint and as for last resource i will try pipewire-pulse
Offline
Pages: 1