You are not logged in.

Pages: 1

#1 2023-06-29 22:07:59

throbscottle
Member
Registered: 2011-11-05
Posts: 55

Middle button emulation stopped working after update

Middle button emulation has worked on my (over 10yo) laptop for years with no problem - suddenly since updating it last week this has stopped working!
I changed the regular kernel for the LTS one to work around another problem with not waking from sleep properly, but this hasn't helped the trackpad buttons.
So, libinput has been updated from 1.21.0-1 -> 1.23.0-1 and xf86-input-libinput 1.2.1-1 -> 1.3.0-1
Libinput says the middle button emulation is "n/a". I don't know what it said before the update because there wasn't an issue.

$ xinput list-props 14
Device 'AlpsPS/2 ALPS DualPoint TouchPad':
        Device Enabled (147):   1
        Coordinate Transformation Matrix (149): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
        libinput Tapping Enabled (308): 1
        libinput Tapping Enabled Default (309): 0
        libinput Tapping Drag Enabled (310):    1
        libinput Tapping Drag Enabled Default (311):    1
        libinput Tapping Drag Lock Enabled (312):       0
        libinput Tapping Drag Lock Enabled Default (313):       0
        libinput Tapping Button Mapping Enabled (314):  1, 0
        libinput Tapping Button Mapping Default (315):  1, 0
        libinput Natural Scrolling Enabled (279):       0
        libinput Natural Scrolling Enabled Default (280):       0
        libinput Disable While Typing Enabled (316):    1
        libinput Disable While Typing Enabled Default (317):    1
        libinput Scroll Methods Available (281):        1, 1, 0
        libinput Scroll Method Enabled (282):   0, 1, 0
        libinput Scroll Method Enabled Default (283):   1, 1, 0
        libinput Accel Speed (290):     0.000000
        libinput Accel Speed Default (291):     0.000000
        libinput Accel Profiles Available (292):        1, 1, 1
        libinput Accel Profile Enabled (293):   1, 0, 0
        libinput Accel Profile Enabled Default (294):   1, 0, 0
        libinput Accel Custom Fallback Points (295):    <no items>
        libinput Accel Custom Fallback Step (296):      0.000000
        libinput Accel Custom Motion Points (297):      <no items>
        libinput Accel Custom Motion Step (298):        0.000000
        libinput Accel Custom Scroll Points (299):      <no items>
        libinput Accel Custom Scroll Step (300):        0.000000
        libinput Left Handed Enabled (301):     0
        libinput Left Handed Enabled Default (302):     0
        libinput Send Events Modes Available (264):     1, 1
        libinput Send Events Mode Enabled (265):        0, 0
        libinput Send Events Mode Enabled Default (266):        0, 0
        Device Node (267):      "/dev/input/event15"
        Device Product ID (268):        2, 8
        libinput Drag Lock Buttons (303):       <no items>
        libinput Horizontal Scroll Enabled (304):       1
        libinput Scrolling Pixel Distance (305):        15
        libinput Scrolling Pixel Distance Default (306):        15
        libinput High Resolution Wheel Scroll Enabled (307):    1

and 

$ sudo libinput list-devices
Device:           AlpsPS/2 ALPS DualPoint TouchPad
Kernel:           /dev/input/event15
Group:            8
Seat:             seat0, default
Size:             71x50mm
Capabilities:     pointer 
Tap-to-click:     disabled
Tap-and-drag:     enabled
Tap drag lock:    disabled
Left-handed:      disabled
Nat.scrolling:    disabled
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   *two-finger edge 
Click methods:    none
Disable-w-typing: enabled
Disable-w-trackpointing: enabled
Accel profiles:   flat *adaptive custom
Rotation:         n/a

I've tried adding a code snippet to an xorg.d conf file, which makes no difference. Attempting 

$ xinput set-prop 14 "libinput Middle Emulation Enabled" 1

results in 

property 'libinput Middle Emulation Enabled' doesn't exist, you need to specify its type and format

So I'm stumped. Is this a bug in libinput, or something else?

Offline

#2 2023-06-30 06:24:43

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,784

Re: Middle button emulation stopped working after update

the trackpad buttons

'AlpsPS/2 ALPS DualPoint TouchPad'

Are you maybe looking at the wrong device?

xinput list

I've tried adding a code snippet to an xorg.d conf file

Please post that and the resulting xorg log.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#3 2023-07-02 19:29:17

throbscottle
Member
Registered: 2011-11-05
Posts: 55

Re: Middle button emulation stopped working after update

Thanks for the response. Yes, I am looking at the correct device. The alternatives are the rubber track-stick thingy, which has it's own buttons with an actual middle button (I just never use it, and since this problem found it doesn't work very well anyway), the virtual XTEST pointer and core pointer. It's definitely the trackpad, which has 2 buttons.
Right, now to try and find what I added to xorg configuration, since I deleted it when it didn't work...
And here it is. From https://bbs.archlinux.org/viewtopic.php?id=107490 I originally copied (slightly edited) the whole snippet to a new file in /etc/X11/xorg.conf.d, but I just tried it again adding only 

Option "Emulate3Buttons" "on"

to 30-touchpad.conf.
After I restart X, xorg.conf shows me (skipping all the video stuff) :

[  3132.579] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  3132.579] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  3132.579] (**) Power Button: Applying InputClass "system=keyboard"
[  3132.579] (**) Power Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.579] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  3132.579] (II) LoadModule: "libinput"
[  3132.579] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  3132.581] (II) Module libinput: vendor="X.Org Foundation"
[  3132.581]    compiled for 1.21.1.8, module version = 1.3.0
[  3132.581]    Module class: X.Org XInput Driver
[  3132.581]    ABI class: X.Org XInput driver, version 24.4
[  3132.581] (II) Using input driver 'libinput' for 'Power Button'
[  3132.581] (**) Power Button: always reports core events
[  3132.581] (**) Option "Device" "/dev/input/event3"
[  3132.584] (EE) Unknown key AttrEventCodeEnable in [KB Gear Tablet] (local-overrides.quirks)
[  3132.584] (EE) Failed to load the device quirks from /usr/share/libinput and /etc/libinput/local-overrides.quirks. This will negatively affect device behavior. See https://wayland.freedesktop.org/libinput/doc/1.23.0/device-quirks.html for details.
[  3132.584] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  3132.584] (II) event3  - Power Button: device is a keyboard
[  3132.584] (II) event3  - Power Button: device removed
[  3132.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  3132.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  3132.613] (**) Option "xkb_model" "pc104"
[  3132.613] (**) Option "xkb_layout" "gb"
[  3132.613] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3132.645] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  3132.645] (II) event3  - Power Button: device is a keyboard
[  3132.647] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  3132.647] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  3132.647] (**) Video Bus: Applying InputClass "system=keyboard"
[  3132.647] (**) Video Bus: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.647] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  3132.647] (II) Using input driver 'libinput' for 'Video Bus'
[  3132.647] (**) Video Bus: always reports core events
[  3132.647] (**) Option "Device" "/dev/input/event4"
[  3132.648] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  3132.648] (II) event4  - Video Bus: device is a keyboard
[  3132.648] (II) event4  - Video Bus: device removed
[  3132.689] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4/event4"
[  3132.689] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  3132.689] (**) Option "xkb_model" "pc104"
[  3132.689] (**) Option "xkb_layout" "gb"
[  3132.689] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3132.690] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  3132.690] (II) event4  - Video Bus: device is a keyboard
[  3132.691] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  3132.691] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  3132.691] (**) Power Button: Applying InputClass "system=keyboard"
[  3132.691] (**) Power Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.691] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  3132.691] (II) Using input driver 'libinput' for 'Power Button'
[  3132.691] (**) Power Button: always reports core events
[  3132.691] (**) Option "Device" "/dev/input/event1"
[  3132.692] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  3132.692] (II) event1  - Power Button: device is a keyboard
[  3132.692] (II) event1  - Power Button: device removed
[  3132.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  3132.726] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  3132.726] (**) Option "xkb_model" "pc104"
[  3132.726] (**) Option "xkb_layout" "gb"
[  3132.726] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3132.727] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  3132.727] (II) event1  - Power Button: device is a keyboard
[  3132.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  3132.728] (**) Lid Switch: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.728] (II) Using input driver 'libinput' for 'Lid Switch'
[  3132.728] (**) Lid Switch: always reports core events
[  3132.728] (**) Option "Device" "/dev/input/event0"
[  3132.728] (II) event0  - Lid Switch: is tagged by udev as: Switch
[  3132.728] (II) event0  - Lid Switch: device is a switch device
[  3132.728] (II) event0  - Lid Switch: device removed
[  3132.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0"
[  3132.743] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 9)
[  3132.743] (II) event0  - Lid Switch: is tagged by udev as: Switch
[  3132.743] (II) event0  - Lid Switch: device is a switch device
[  3132.744] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  3132.744] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  3132.744] (**) Sleep Button: Applying InputClass "system=keyboard"
[  3132.744] (**) Sleep Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.744] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  3132.744] (II) Using input driver 'libinput' for 'Sleep Button'
[  3132.744] (**) Sleep Button: always reports core events
[  3132.744] (**) Option "Device" "/dev/input/event2"
[  3132.745] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  3132.745] (II) event2  - Sleep Button: device is a keyboard
[  3132.745] (II) event2  - Sleep Button: device removed
[  3132.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[  3132.769] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  3132.769] (**) Option "xkb_model" "pc104"
[  3132.769] (**) Option "xkb_layout" "gb"
[  3132.769] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3132.770] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  3132.770] (II) event2  - Sleep Button: device is a keyboard
[  3132.771] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[  3132.772] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.772] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3'
[  3132.772] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[  3132.772] (**) Option "Device" "/dev/input/event8"
[  3132.772] (II) event8  - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[  3132.803] (II) event8  - not using input device '/dev/input/event8'.
[  3132.803] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event8
[  3132.803] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3"
[  3132.803] (II) UnloadModule: "libinput"
[  3132.803] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[  3132.803] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.803] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7'
[  3132.803] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[  3132.803] (**) Option "Device" "/dev/input/event9"
[  3132.804] (II) event9  - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[  3132.836] (II) event9  - not using input device '/dev/input/event9'.
[  3132.836] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event9
[  3132.836] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7"
[  3132.836] (II) UnloadModule: "libinput"
[  3132.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[  3132.837] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.837] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8'
[  3132.837] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[  3132.837] (**) Option "Device" "/dev/input/event10"
[  3132.837] (II) event10 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[  3132.869] (II) event10 - not using input device '/dev/input/event10'.
[  3132.869] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event10
[  3132.869] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8"
[  3132.869] (II) UnloadModule: "libinput"
[  3132.870] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[  3132.870] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.870] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9'
[  3132.870] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[  3132.870] (**) Option "Device" "/dev/input/event11"
[  3132.871] (II) event11 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[  3132.903] (II) event11 - not using input device '/dev/input/event11'.
[  3132.903] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event11
[  3132.903] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9"
[  3132.903] (II) UnloadModule: "libinput"
[  3132.903] (II) config/udev: Adding input device HDA Intel MID Dock Line Out (/dev/input/event12)
[  3132.903] (**) HDA Intel MID Dock Line Out: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.903] (II) Using input driver 'libinput' for 'HDA Intel MID Dock Line Out'
[  3132.903] (**) HDA Intel MID Dock Line Out: always reports core events
[  3132.903] (**) Option "Device" "/dev/input/event12"
[  3132.904] (II) event12 - HDA Intel MID Dock Line Out: is tagged by udev as: Switch
[  3132.936] (II) event12 - not using input device '/dev/input/event12'.
[  3132.936] (EE) libinput: HDA Intel MID Dock Line Out: Failed to create a device for /dev/input/event12
[  3132.936] (EE) PreInit returned 2 for "HDA Intel MID Dock Line Out"
[  3132.936] (II) UnloadModule: "libinput"
[  3132.937] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event13)
[  3132.937] (**) HDA Intel MID Headphone: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.937] (II) Using input driver 'libinput' for 'HDA Intel MID Headphone'
[  3132.937] (**) HDA Intel MID Headphone: always reports core events
[  3132.937] (**) Option "Device" "/dev/input/event13"
[  3132.937] (II) event13 - HDA Intel MID Headphone: is tagged by udev as: Switch
[  3132.979] (II) event13 - not using input device '/dev/input/event13'.
[  3132.979] (EE) libinput: HDA Intel MID Headphone: Failed to create a device for /dev/input/event13
[  3132.979] (EE) PreInit returned 2 for "HDA Intel MID Headphone"
[  3132.979] (II) UnloadModule: "libinput"
[  3132.980] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[  3132.980] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  3132.980] (**) Dell WMI hotkeys: Applying InputClass "system=keyboard"
[  3132.980] (**) Dell WMI hotkeys: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3132.980] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  3132.980] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[  3132.980] (**) Dell WMI hotkeys: always reports core events
[  3132.980] (**) Option "Device" "/dev/input/event7"
[  3132.981] (II) event7  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[  3132.981] (II) event7  - Dell WMI hotkeys: device is a keyboard
[  3132.981] (II) event7  - Dell WMI hotkeys: device removed
[  3133.013] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9/event7"
[  3133.013] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[  3133.013] (**) Option "xkb_model" "pc104"
[  3133.013] (**) Option "xkb_layout" "gb"
[  3133.013] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3133.014] (II) event7  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[  3133.014] (II) event7  - Dell WMI hotkeys: device is a keyboard
[  3133.016] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[  3133.016] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  3133.016] (**) AT Translated Set 2 keyboard: Applying InputClass "system=keyboard"
[  3133.016] (**) AT Translated Set 2 keyboard: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3133.016] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  3133.016] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  3133.016] (**) AT Translated Set 2 keyboard: always reports core events
[  3133.016] (**) Option "Device" "/dev/input/event5"
[  3133.017] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  3133.017] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[  3133.017] (II) event5  - AT Translated Set 2 keyboard: device removed
[  3133.039] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[  3133.039] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  3133.039] (**) Option "xkb_model" "pc104"
[  3133.039] (**) Option "xkb_layout" "gb"
[  3133.039] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  3133.041] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  3133.041] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[  3133.042] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event14)
[  3133.042] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[  3133.042] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3133.042] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[  3133.042] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[  3133.042] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[  3133.042] (**) Option "Device" "/dev/input/event14"
[  3133.043] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[  3133.043] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[  3133.044] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device removed
[  3133.083] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.083] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.083] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.083] (**) Option "NaturalScrolling" "Off"
[  3133.083] (**) Option "ScrollMethod" "Edge"
[  3133.083] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event14"
[  3133.083] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 13)
[  3133.083] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3133.083] (**) Option "AccelerationScheme" "none"
[  3133.083] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[  3133.083] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[  3133.083] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[  3133.084] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[  3133.084] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[  3133.084] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3133.085] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[  3133.085] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3133.085] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[  3133.085] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[  3133.086] (**) Option "Device" "/dev/input/mouse0"
[  3133.126] (II) mouse0  - not using input device '/dev/input/mouse0'.
[  3133.126] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to create a device for /dev/input/mouse0
[  3133.126] (EE) PreInit returned 2 for "AlpsPS/2 ALPS DualPoint Stick"
[  3133.126] (II) UnloadModule: "libinput"
[  3133.127] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event15)
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[  3133.127] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[  3133.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[  3133.127] (**) Option "Device" "/dev/input/event15"
[  3133.128] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[  3133.128] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[  3133.128] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[  3133.128] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[  3133.169] (**) Option "Tapping" "on"
[  3133.169] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.169] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.169] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  3133.169] (**) Option "NaturalScrolling" "Off"
[  3133.169] (**) Option "ScrollMethod" "Edge"
[  3133.170] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[  3133.170] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 14)
[  3133.170] (**) Option "AccelerationScheme" "none"
[  3133.170] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[  3133.170] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[  3133.170] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[  3133.171] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[  3133.171] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[  3133.171] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[  3133.172] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[  3133.172] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  3133.173] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  3133.173] (**) PC Speaker: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  3133.173] (II) Using input driver 'libinput' for 'PC Speaker'
[  3133.173] (**) PC Speaker: always reports core events
[  3133.173] (**) Option "Device" "/dev/input/event6"
[  3133.174] (II) event6  - PC Speaker: not tagged as supported input device
[  3133.216] (II) event6  - not using input device '/dev/input/event6'.
[  3133.216] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event6
[  3133.216] (EE) PreInit returned 2 for "PC Speaker"
[  3133.216] (II) UnloadModule: "libinput"
[  3140.463] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3140.464] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3140.464] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3140.465] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3140.869] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  3141.457] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
[  3141.457] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  3141.457] (II) NOUVEAU(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  3141.457] (II) NOUVEAU(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[  3145.912] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
[  3145.912] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  3145.912] (II) NOUVEAU(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  3145.912] (II) NOUVEAU(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)

I can't see anything relating to middle button emulation at all.

Offline

#4 2023-07-02 19:32:33

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,784

Re: Middle button emulation stopped working after update

After I restart X, xorg.conf shows me (skipping all the video stuff) :

Don't do that, post the entire xorg log, the entire output of xinput and the entire xorg configlet you created.
The "Emulate3Buttons" option doesn't show up in the xorg log, ie. it's not parsed or a match condition doesn't apply to anything - or you "skipped" it.

Edit:  If you copypasta'd 'MatchIsPointer "on"", that's obviously wrong in this context.

Last edited by seth (2023-07-02 19:34:04)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2023-07-03 16:59:10

throbscottle
Member
Registered: 2011-11-05
Posts: 55

Re: Middle button emulation stopped working after update

Oh ok. Here goes!

$ cat /etc/X11/xorg.conf.d/30-touchpad.conf 
Section "InputClass"
    Identifier "AlpsPS/2 ALPS DualPoint TouchPad"
    Driver "libinput"
    Option "Tapping" "on"
    Option "NaturalScrolling" "Off"
    Option "ScrollMethod" "Edge"
    Option "Emulate3Buttons" "on"    #### line added to pre-existing file
EndSection
$ xinput
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ AlpsPS/2 ALPS DualPoint Stick             id=13   [slave  pointer  (2)]
⎜   ↳ AlpsPS/2 ALPS DualPoint TouchPad          id=14   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Video Bus                                 id=7    [slave  keyboard (3)]
    ↳ Power Button                              id=8    [slave  keyboard (3)]
    ↳ Lid Switch                                id=9    [slave  keyboard (3)]
    ↳ Sleep Button                              id=10   [slave  keyboard (3)]
    ↳ Dell WMI hotkeys                          id=11   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=12   [slave  keyboard (3)]
$ cat /var/log/Xorg.0.log
[  1047.106] (--) Log file renamed from "/var/log/Xorg.pid-5664.log" to "/var/log/Xorg.0.log"
[  1047.107] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[  1047.107] Current Operating System: Linux bobcat 6.1.35-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 21 Jun 2023 15:54:02 +0000 x86_64
[  1047.107] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=1bb8b139-dbb1-42fe-ab3b-6f62c4bf2a55 rw init_on_alloc=0 fastboot quiet loglevel=4 resume=UUID=2b489103-f95f-4ee8-954b-2d7b50808e32
[  1047.107]  
[  1047.107] Current version of pixman: 0.42.2
[  1047.107]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  1047.107] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1047.107] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul  3 17:45:45 2023
[  1047.107] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1047.107] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1047.107] (==) No Layout section.  Using the first Screen section.
[  1047.107] (==) No screen section available. Using defaults.
[  1047.107] (**) |-->Screen "Default Screen Section" (0)
[  1047.108] (**) |   |-->Monitor "<default monitor>"
[  1047.108] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[  1047.108] (==) Automatically adding devices
[  1047.108] (==) Automatically enabling devices
[  1047.108] (==) Automatically adding GPU devices
[  1047.108] (==) Automatically binding GPU devices
[  1047.108] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1047.108] (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF,
        /usr/share/fonts/OTF,
        /usr/share/fonts/Type1,
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[  1047.108] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1047.108] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1047.108] (II) Module ABI versions:
[  1047.108]    X.Org ANSI C Emulation: 0.4
[  1047.108]    X.Org Video Driver: 25.2
[  1047.108]    X.Org XInput driver : 24.4
[  1047.108]    X.Org Server Extension : 10.0
[  1047.109] (++) using VT number 2

[  1047.109] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1047.110] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1047.110] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[  1047.115] (--) PCI:*(1@0:0:0) 10de:0a6c:1028:040a rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00006000/128, BIOS @ 0x????????/131072
[  1047.116] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1047.116] (II) LoadModule: "glx"
[  1047.116] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1047.118] (II) Module glx: vendor="X.Org Foundation"
[  1047.118]    compiled for 1.21.1.8, module version = 1.0.0
[  1047.118]    ABI class: X.Org Server Extension, version 10.0
[  1047.118] (==) Matched nouveau as autoconfigured driver 0
[  1047.118] (==) Matched nv as autoconfigured driver 1
[  1047.118] (==) Matched modesetting as autoconfigured driver 2
[  1047.118] (==) Matched fbdev as autoconfigured driver 3
[  1047.118] (==) Matched vesa as autoconfigured driver 4
[  1047.118] (==) Assigned the driver to the xf86ConfigLayout
[  1047.118] (II) LoadModule: "nouveau"
[  1047.118] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  1047.119] (II) Module nouveau: vendor="X.Org Foundation"
[  1047.119]    compiled for 1.21.1.1, module version = 1.0.17
[  1047.119]    Module class: X.Org Video Driver
[  1047.119]    ABI class: X.Org Video Driver, version 25.2
[  1047.119] (II) LoadModule: "nv"
[  1047.119] (WW) Warning, couldn't open module nv
[  1047.119] (EE) Failed to load module "nv" (module does not exist, 0)
[  1047.119] (II) LoadModule: "modesetting"
[  1047.119] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1047.120] (II) Module modesetting: vendor="X.Org Foundation"
[  1047.120]    compiled for 1.21.1.8, module version = 1.21.1
[  1047.120]    Module class: X.Org Video Driver
[  1047.120]    ABI class: X.Org Video Driver, version 25.2
[  1047.120] (II) LoadModule: "fbdev"
[  1047.120] (WW) Warning, couldn't open module fbdev
[  1047.120] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1047.120] (II) LoadModule: "vesa"
[  1047.121] (WW) Warning, couldn't open module vesa
[  1047.121] (EE) Failed to load module "vesa" (module does not exist, 0)
[  1047.121] (II) NOUVEAU driver 
[  1047.121] (II) NOUVEAU driver for NVIDIA chipset families :
[  1047.121]    RIVA TNT            (NV04)
[  1047.121]    RIVA TNT2           (NV05)
[  1047.121]    GeForce 256         (NV10)
[  1047.121]    GeForce 2           (NV11, NV15)
[  1047.121]    GeForce 4MX         (NV17, NV18)
[  1047.121]    GeForce 3           (NV20)
[  1047.121]    GeForce 4Ti         (NV25, NV28)
[  1047.121]    GeForce FX          (NV3x)
[  1047.121]    GeForce 6           (NV4x)
[  1047.121]    GeForce 7           (G7x)
[  1047.121]    GeForce 8           (G8x)
[  1047.121]    GeForce 9           (G9x)
[  1047.121]    GeForce GTX 2xx/3xx (GT2xx)
[  1047.121]    GeForce GTX 4xx/5xx (GFxxx)
[  1047.121]    GeForce GTX 6xx/7xx (GKxxx)
[  1047.121]    GeForce GTX 9xx     (GMxxx)
[  1047.121]    GeForce GTX 10xx    (GPxxx)
[  1047.121] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1047.123] (II) [drm] nouveau interface version: 1.3.1
[  1047.123] (WW) Falling back to old probe method for modesetting
[  1047.123] (II) Loading sub module "dri2"
[  1047.123] (II) LoadModule: "dri2"
[  1047.123] (II) Module "dri2" already built-in
[  1047.123] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[  1047.123] (II) NOUVEAU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[  1047.123] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[  1047.123] (==) NOUVEAU(0): RGB weight 888
[  1047.123] (==) NOUVEAU(0): Default visual is TrueColor
[  1047.123] (==) NOUVEAU(0): Using HW cursor
[  1047.123] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[  1047.123] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[  1047.123] (==) NOUVEAU(0): Page flipping enabled
[  1047.123] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[  1047.123] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[  1047.123] (II) NOUVEAU(0): Initializing outputs ...
[  1047.133] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[  1047.144] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[  1047.196] (II) NOUVEAU(0): Output DP-1 has no monitor section
[  1047.249] (II) NOUVEAU(0): Output DP-2 has no monitor section
[  1047.249] (II) NOUVEAU(0): 4 crtcs needed for screen.
[  1047.250] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[  1047.250] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[  1047.260] (II) NOUVEAU(0): EDID for output eDP-1
[  1047.260] (II) NOUVEAU(0): Manufacturer: SEC  Model: 5442  Serial#: 0
[  1047.260] (II) NOUVEAU(0): Year: 2010  Week: 0
[  1047.260] (II) NOUVEAU(0): EDID Version: 1.4
[  1047.260] (II) NOUVEAU(0): Digital Display Input
[  1047.260] (II) NOUVEAU(0): 6 bits per channel
[  1047.260] (II) NOUVEAU(0): Digital interface is DisplayPort
[  1047.260] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[  1047.260] (II) NOUVEAU(0): Gamma: 2.20
[  1047.260] (II) NOUVEAU(0): No DPMS capabilities specified
[  1047.260] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1047.260] (II) NOUVEAU(0): First detailed timing is preferred mode
[  1047.260] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[  1047.260] (II) NOUVEAU(0): redX: 0.544 redY: 0.357   greenX: 0.340 greenY: 0.585
[  1047.260] (II) NOUVEAU(0): blueX: 0.160 blueY: 0.118   whiteX: 0.310 whiteY: 0.330
[  1047.260] (II) NOUVEAU(0): Manufacturer's mask: 0
[  1047.260] (II) NOUVEAU(0): Supported detailed timing:
[  1047.260] (II) NOUVEAU(0): clock: 107.8 MHz   Image Size:  303 x 190 mm
[  1047.260] (II) NOUVEAU(0): h_active: 1440  h_sync: 1486  h_sync_end 1556 h_blank_end 1928 h_border: 0
[  1047.260] (II) NOUVEAU(0): v_active: 900  v_sync: 909  v_sync_end 918 v_blanking: 932 v_border: 0
[  1047.260] (II) NOUVEAU(0): Supported detailed timing:
[  1047.260] (II) NOUVEAU(0): clock: 71.9 MHz   Image Size:  303 x 190 mm
[  1047.260] (II) NOUVEAU(0): h_active: 1440  h_sync: 1486  h_sync_end 1556 h_blank_end 1928 h_border: 0
[  1047.260] (II) NOUVEAU(0): v_active: 900  v_sync: 909  v_sync_end 918 v_blanking: 932 v_border: 0
[  1047.260] (II) NOUVEAU(0):  WG407141BT
[  1047.260] (II) NOUVEAU(0): Unknown vendor-specific block 0
[  1047.260] (II) NOUVEAU(0): EDID (in hex):
[  1047.260] (II) NOUVEAU(0):   00ffffffffffff004ca3425400000000
[  1047.260] (II) NOUVEAU(0):   00140104951e13780a63168b5b579529
[  1047.260] (II) NOUVEAU(0):   1e4f5400000001010101010101010101
[  1047.260] (II) NOUVEAU(0):   0101010101011d2aa0e8518420302e46
[  1047.260] (II) NOUVEAU(0):   99002fbe1000001a141ca0e851842030
[  1047.260] (II) NOUVEAU(0):   2e4699002fbe1000001a000000fe0057
[  1047.260] (II) NOUVEAU(0):   473430378131343142540a2000000000
[  1047.260] (II) NOUVEAU(0):   00004101190000000009010a20200005
[  1047.260] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[  1047.260] (II) NOUVEAU(0): Modeline "1440x900"x60.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  1047.260] (II) NOUVEAU(0): Modeline "1440x900"x40.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[  1047.260] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[  1047.260] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  1047.260] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  1047.271] (II) NOUVEAU(0): EDID for output VGA-1
[  1047.323] (II) NOUVEAU(0): EDID for output DP-1
[  1047.376] (II) NOUVEAU(0): EDID for output DP-2
[  1047.376] (II) NOUVEAU(0): Output eDP-1 connected
[  1047.376] (II) NOUVEAU(0): Output VGA-1 disconnected
[  1047.376] (II) NOUVEAU(0): Output DP-1 disconnected
[  1047.376] (II) NOUVEAU(0): Output DP-2 disconnected
[  1047.376] (II) NOUVEAU(0): Using exact sizes for initial modes
[  1047.376] (II) NOUVEAU(0): Output eDP-1 using initial mode 1440x900 +0+0
[  1047.376] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[  1047.376] (II) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[  1047.376] (**) NOUVEAU(0):  Driver mode "1440x900": 107.8 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
[  1047.376] (II) NOUVEAU(0): Modeline "1440x900"x60.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  1047.376] (**) NOUVEAU(0):  Driver mode "1440x900": 71.9 MHz (scaled from 0.0 MHz), 37.3 kHz, 40.0 Hz
[  1047.376] (II) NOUVEAU(0): Modeline "1440x900"x40.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[  1047.376] (**) NOUVEAU(0):  Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[  1047.376] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.77  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[  1047.376] (**) NOUVEAU(0):  Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[  1047.376] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  1047.376] (**) NOUVEAU(0):  Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz
[  1047.376] (II) NOUVEAU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  1047.376] (==) NOUVEAU(0): DPI set to (96, 96)
[  1047.376] (II) Loading sub module "fb"
[  1047.376] (II) LoadModule: "fb"
[  1047.376] (II) Module "fb" already built-in
[  1047.376] (II) Loading sub module "shadowfb"
[  1047.376] (II) LoadModule: "shadowfb"
[  1047.376] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[  1047.377] (II) Module shadowfb: vendor="X.Org Foundation"
[  1047.377]    compiled for 1.21.1.8, module version = 1.0.0
[  1047.377]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1047.377] (II) UnloadModule: "modesetting"
[  1047.377] (II) Unloading modesetting
[  1047.378] (II) NOUVEAU(0): Channel setup complete.
[  1047.379] (II) NOUVEAU(0): [COPY] async initialised.
[  1047.379] (II) NOUVEAU(0): Hardware support for Present enabled
[  1047.379] (II) NOUVEAU(0): [DRI2] Setup complete
[  1047.379] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[  1047.379] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[  1047.379] (II) Loading sub module "exa"
[  1047.379] (II) LoadModule: "exa"
[  1047.379] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1047.379] (II) Module exa: vendor="X.Org Foundation"
[  1047.379]    compiled for 1.21.1.8, module version = 2.6.0
[  1047.379]    ABI class: X.Org Video Driver, version 25.2
[  1047.379] (II) EXA(0): Driver allocated offscreen pixmaps
[  1047.379] (II) EXA(0): Driver registered support for the following operations:
[  1047.379] (II)         Solid
[  1047.379] (II)         Copy
[  1047.379] (II)         Composite (RENDER acceleration)
[  1047.379] (II)         UploadToScreen
[  1047.379] (II)         DownloadFromScreen
[  1047.379] (==) NOUVEAU(0): Backing store enabled
[  1047.379] (==) NOUVEAU(0): Silken mouse enabled
[  1047.379] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[  1047.379] (II) NOUVEAU(0): [XvMC] Extension initialized.
[  1047.379] (==) NOUVEAU(0): DPMS enabled
[  1047.380] (II) Initializing extension Generic Event Extension
[  1047.380] (II) Initializing extension SHAPE
[  1047.380] (II) Initializing extension MIT-SHM
[  1047.380] (II) Initializing extension XInputExtension
[  1047.380] (II) Initializing extension XTEST
[  1047.380] (II) Initializing extension BIG-REQUESTS
[  1047.381] (II) Initializing extension SYNC
[  1047.381] (II) Initializing extension XKEYBOARD
[  1047.381] (II) Initializing extension XC-MISC
[  1047.381] (II) Initializing extension SECURITY
[  1047.381] (II) Initializing extension XFIXES
[  1047.381] (II) Initializing extension RENDER
[  1047.381] (II) Initializing extension RANDR
[  1047.381] (II) Initializing extension COMPOSITE
[  1047.382] (II) Initializing extension DAMAGE
[  1047.382] (II) Initializing extension MIT-SCREEN-SAVER
[  1047.382] (II) Initializing extension DOUBLE-BUFFER
[  1047.382] (II) Initializing extension RECORD
[  1047.382] (II) Initializing extension DPMS
[  1047.382] (II) Initializing extension Present
[  1047.382] (II) Initializing extension DRI3
[  1047.382] (II) Initializing extension X-Resource
[  1047.382] (II) Initializing extension XVideo
[  1047.382] (II) Initializing extension XVideo-MotionCompensation
[  1047.383] (II) Initializing extension GLX
[  1047.421] (II) AIGLX: Loaded and initialized nouveau
[  1047.421] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1047.421] (II) Initializing extension XFree86-VidModeExtension
[  1047.421] (II) Initializing extension XFree86-DGA
[  1047.421] (II) Initializing extension XFree86-DRI
[  1047.421] (II) Initializing extension DRI2
[  1047.424] (II) NOUVEAU(0): NVEnterVT is called.
[  1047.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[  1047.457] resize called 1440 900
[  1047.571] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1047.571] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1047.571] (**) Power Button: Applying InputClass "system=keyboard"
[  1047.571] (**) Power Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.571] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1047.571] (II) LoadModule: "libinput"
[  1047.571] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1047.573] (II) Module libinput: vendor="X.Org Foundation"
[  1047.573]    compiled for 1.21.1.8, module version = 1.3.0
[  1047.573]    Module class: X.Org XInput Driver
[  1047.573]    ABI class: X.Org XInput driver, version 24.4
[  1047.573] (II) Using input driver 'libinput' for 'Power Button'
[  1047.573] (**) Power Button: always reports core events
[  1047.573] (**) Option "Device" "/dev/input/event3"
[  1047.575] (EE) Unknown key AttrEventCodeEnable in [KB Gear Tablet] (local-overrides.quirks)
[  1047.575] (EE) Failed to load the device quirks from /usr/share/libinput and /etc/libinput/local-overrides.quirks. This will negatively affect device behavior. See https://wayland.freedesktop.org/libinput/doc/1.23.0/device-quirks.html for details.
[  1047.575] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  1047.575] (II) event3  - Power Button: device is a keyboard
[  1047.575] (II) event3  - Power Button: device removed
[  1047.606] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  1047.606] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1047.606] (**) Option "xkb_model" "pc104"
[  1047.606] (**) Option "xkb_layout" "gb"
[  1047.606] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.633] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  1047.633] (II) event3  - Power Button: device is a keyboard
[  1047.634] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  1047.634] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1047.634] (**) Video Bus: Applying InputClass "system=keyboard"
[  1047.634] (**) Video Bus: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.634] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1047.634] (II) Using input driver 'libinput' for 'Video Bus'
[  1047.634] (**) Video Bus: always reports core events
[  1047.634] (**) Option "Device" "/dev/input/event4"
[  1047.634] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  1047.634] (II) event4  - Video Bus: device is a keyboard
[  1047.634] (II) event4  - Video Bus: device removed
[  1047.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4/event4"
[  1047.680] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1047.680] (**) Option "xkb_model" "pc104"
[  1047.680] (**) Option "xkb_layout" "gb"
[  1047.680] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.680] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  1047.680] (II) event4  - Video Bus: device is a keyboard
[  1047.681] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1047.681] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1047.681] (**) Power Button: Applying InputClass "system=keyboard"
[  1047.681] (**) Power Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.681] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1047.681] (II) Using input driver 'libinput' for 'Power Button'
[  1047.681] (**) Power Button: always reports core events
[  1047.681] (**) Option "Device" "/dev/input/event1"
[  1047.682] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  1047.682] (II) event1  - Power Button: device is a keyboard
[  1047.682] (II) event1  - Power Button: device removed
[  1047.696] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  1047.696] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1047.696] (**) Option "xkb_model" "pc104"
[  1047.696] (**) Option "xkb_layout" "gb"
[  1047.696] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.697] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  1047.697] (II) event1  - Power Button: device is a keyboard
[  1047.698] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  1047.698] (**) Lid Switch: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.698] (II) Using input driver 'libinput' for 'Lid Switch'
[  1047.698] (**) Lid Switch: always reports core events
[  1047.698] (**) Option "Device" "/dev/input/event0"
[  1047.698] (II) event0  - Lid Switch: is tagged by udev as: Switch
[  1047.698] (II) event0  - Lid Switch: device is a switch device
[  1047.698] (II) event0  - Lid Switch: device removed
[  1047.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0"
[  1047.713] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 9)
[  1047.714] (II) event0  - Lid Switch: is tagged by udev as: Switch
[  1047.714] (II) event0  - Lid Switch: device is a switch device
[  1047.714] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1047.714] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1047.714] (**) Sleep Button: Applying InputClass "system=keyboard"
[  1047.714] (**) Sleep Button: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.714] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1047.714] (II) Using input driver 'libinput' for 'Sleep Button'
[  1047.714] (**) Sleep Button: always reports core events
[  1047.714] (**) Option "Device" "/dev/input/event2"
[  1047.715] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  1047.715] (II) event2  - Sleep Button: device is a keyboard
[  1047.715] (II) event2  - Sleep Button: device removed
[  1047.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[  1047.730] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  1047.730] (**) Option "xkb_model" "pc104"
[  1047.730] (**) Option "xkb_layout" "gb"
[  1047.730] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.730] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  1047.730] (II) event2  - Sleep Button: device is a keyboard
[  1047.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[  1047.731] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.731] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3'
[  1047.731] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events
[  1047.731] (**) Option "Device" "/dev/input/event8"
[  1047.732] (II) event8  - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[  1047.766] (II) event8  - not using input device '/dev/input/event8'.
[  1047.766] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event8
[  1047.766] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3"
[  1047.766] (II) UnloadModule: "libinput"
[  1047.767] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[  1047.767] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.767] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7'
[  1047.767] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events
[  1047.767] (**) Option "Device" "/dev/input/event9"
[  1047.767] (II) event9  - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[  1047.799] (II) event9  - not using input device '/dev/input/event9'.
[  1047.800] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event9
[  1047.800] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7"
[  1047.800] (II) UnloadModule: "libinput"
[  1047.800] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[  1047.800] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.800] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8'
[  1047.800] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events
[  1047.800] (**) Option "Device" "/dev/input/event10"
[  1047.801] (II) event10 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[  1047.833] (II) event10 - not using input device '/dev/input/event10'.
[  1047.833] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event10
[  1047.833] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8"
[  1047.833] (II) UnloadModule: "libinput"
[  1047.833] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[  1047.833] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.833] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9'
[  1047.833] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events
[  1047.833] (**) Option "Device" "/dev/input/event11"
[  1047.834] (II) event11 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[  1047.869] (II) event11 - not using input device '/dev/input/event11'.
[  1047.870] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event11
[  1047.870] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9"
[  1047.870] (II) UnloadModule: "libinput"
[  1047.870] (II) config/udev: Adding input device HDA Intel MID Dock Line Out (/dev/input/event12)
[  1047.870] (**) HDA Intel MID Dock Line Out: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.870] (II) Using input driver 'libinput' for 'HDA Intel MID Dock Line Out'
[  1047.870] (**) HDA Intel MID Dock Line Out: always reports core events
[  1047.870] (**) Option "Device" "/dev/input/event12"
[  1047.871] (II) event12 - HDA Intel MID Dock Line Out: is tagged by udev as: Switch
[  1047.903] (II) event12 - not using input device '/dev/input/event12'.
[  1047.903] (EE) libinput: HDA Intel MID Dock Line Out: Failed to create a device for /dev/input/event12
[  1047.903] (EE) PreInit returned 2 for "HDA Intel MID Dock Line Out"
[  1047.903] (II) UnloadModule: "libinput"
[  1047.903] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event13)
[  1047.903] (**) HDA Intel MID Headphone: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.903] (II) Using input driver 'libinput' for 'HDA Intel MID Headphone'
[  1047.903] (**) HDA Intel MID Headphone: always reports core events
[  1047.903] (**) Option "Device" "/dev/input/event13"
[  1047.904] (II) event13 - HDA Intel MID Headphone: is tagged by udev as: Switch
[  1047.936] (II) event13 - not using input device '/dev/input/event13'.
[  1047.936] (EE) libinput: HDA Intel MID Headphone: Failed to create a device for /dev/input/event13
[  1047.936] (EE) PreInit returned 2 for "HDA Intel MID Headphone"
[  1047.936] (II) UnloadModule: "libinput"
[  1047.937] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[  1047.937] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1047.937] (**) Dell WMI hotkeys: Applying InputClass "system=keyboard"
[  1047.937] (**) Dell WMI hotkeys: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.937] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1047.937] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[  1047.937] (**) Dell WMI hotkeys: always reports core events
[  1047.937] (**) Option "Device" "/dev/input/event7"
[  1047.938] (II) event7  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[  1047.938] (II) event7  - Dell WMI hotkeys: device is a keyboard
[  1047.938] (II) event7  - Dell WMI hotkeys: device removed
[  1047.973] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9/event7"
[  1047.973] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[  1047.973] (**) Option "xkb_model" "pc104"
[  1047.973] (**) Option "xkb_layout" "gb"
[  1047.973] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.974] (II) event7  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[  1047.974] (II) event7  - Dell WMI hotkeys: device is a keyboard
[  1047.974] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[  1047.975] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1047.975] (**) AT Translated Set 2 keyboard: Applying InputClass "system=keyboard"
[  1047.975] (**) AT Translated Set 2 keyboard: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.975] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1047.975] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1047.975] (**) AT Translated Set 2 keyboard: always reports core events
[  1047.975] (**) Option "Device" "/dev/input/event5"
[  1047.975] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1047.975] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[  1047.975] (II) event5  - AT Translated Set 2 keyboard: device removed
[  1047.990] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[  1047.990] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  1047.990] (**) Option "xkb_model" "pc104"
[  1047.990] (**) Option "xkb_layout" "gb"
[  1047.990] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1047.990] (II) event5  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1047.990] (II) event5  - AT Translated Set 2 keyboard: device is a keyboard
[  1047.991] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event14)
[  1047.991] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[  1047.991] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1047.991] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "libinput pointer catchall"
[  1047.991] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[  1047.991] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[  1047.991] (**) Option "Device" "/dev/input/event14"
[  1047.992] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[  1047.992] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[  1047.992] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device removed
[  1048.023] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.023] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.023] (II) libinput: AlpsPS/2 ALPS DualPoint Stick: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.023] (**) Option "NaturalScrolling" "Off"
[  1048.023] (**) Option "ScrollMethod" "Edge"
[  1048.023] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event14"
[  1048.023] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 13)
[  1048.023] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1048.023] (**) Option "AccelerationScheme" "none"
[  1048.023] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[  1048.023] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[  1048.023] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[  1048.024] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: is tagged by udev as: Mouse Pointingstick
[  1048.024] (II) event14 - AlpsPS/2 ALPS DualPoint Stick: device is a pointer
[  1048.024] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1048.024] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[  1048.024] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1048.024] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint Stick'
[  1048.024] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[  1048.024] (**) Option "Device" "/dev/input/mouse0"
[  1048.059] (II) mouse0  - not using input device '/dev/input/mouse0'.
[  1048.060] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to create a device for /dev/input/mouse0
[  1048.060] (EE) PreInit returned 2 for "AlpsPS/2 ALPS DualPoint Stick"
[  1048.060] (II) UnloadModule: "libinput"
[  1048.060] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event15)
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "libinput touchpad catchall"
[  1048.060] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[  1048.060] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[  1048.060] (**) Option "Device" "/dev/input/event15"
[  1048.061] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[  1048.061] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[  1048.061] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[  1048.061] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device removed
[  1048.093] (**) Option "Tapping" "on"
[  1048.093] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.093] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.093] (II) libinput: AlpsPS/2 ALPS DualPoint TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[  1048.093] (**) Option "NaturalScrolling" "Off"
[  1048.093] (**) Option "ScrollMethod" "Edge"
[  1048.093] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[  1048.093] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 14)
[  1048.093] (**) Option "AccelerationScheme" "none"
[  1048.093] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) selected scheme none/0
[  1048.093] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[  1048.093] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[  1048.094] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: is tagged by udev as: Touchpad
[  1048.094] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: no resolution or size hints, assuming a size of 69x50mm
[  1048.094] (II) event15 - AlpsPS/2 ALPS DualPoint TouchPad: device is a touchpad
[  1048.094] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[  1048.094] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1048.095] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  1048.095] (**) PC Speaker: Applying InputClass "AlpsPS/2 ALPS DualPoint TouchPad"
[  1048.095] (II) Using input driver 'libinput' for 'PC Speaker'
[  1048.095] (**) PC Speaker: always reports core events
[  1048.095] (**) Option "Device" "/dev/input/event6"
[  1048.095] (II) event6  - PC Speaker: not tagged as supported input device
[  1048.126] (II) event6  - not using input device '/dev/input/event6'.
[  1048.126] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event6
[  1048.126] (EE) PreInit returned 2 for "PC Speaker"
[  1048.126] (II) UnloadModule: "libinput"
[  1056.153] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1056.153] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1056.153] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1056.153] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1056.375] (EE) libinput: AlpsPS/2 ALPS DualPoint Stick: Failed to set scroll to edge
[  1056.972] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
[  1056.972] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1056.972] (II) NOUVEAU(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  1056.972] (II) NOUVEAU(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)
[  1062.389] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
[  1062.389] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1062.389] (II) NOUVEAU(0): Modeline "1440x900"x0.0  107.81  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (55.9 kHz eP)
[  1062.389] (II) NOUVEAU(0): Modeline "1440x900"x0.0   71.88  1440 1486 1556 1928  900 909 918 932 +hsync -vsync (37.3 kHz e)

Hoping this will expose the culprit!

Offline

#6 2023-07-03 19:34:57

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,784

Re: Middle button emulation stopped working after update

 Option "MiddleEmulation" "True"

Emulate3Buttons is accepted by the evdev driver (yes, they should use the same syntax…)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2023-07-11 19:16:57

throbscottle
Member
Registered: 2011-11-05
Posts: 55

Re: Middle button emulation stopped working after update

Still not working sad

Offline

#8 2023-07-11 19:44:32

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,784

Re: Middle button emulation stopped working after update

https://bbs.archlinux.org/viewtopic.php?id=57855
Post an updated xorg log.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

Pages: 1

Board footer

Powered by FluxBB