You are not logged in.

#1 2023-08-29 17:17:42

quietcornerlinux
Member
Registered: 2022-06-08
Posts: 28

[RESOLVED] Display not working properly when connected via DVI

I had an issue yesterday where the screen went blank during an update. I turned off the computer and back on again. The only entry shown in systemd-boot was to load the motherboard firmware. I inserted a flash drive with arch installation. Selected to boot it. No display shown. Switching from a dvi cable to hdmi resolved the display problem. I then chrooted into my installation and reinstalled [linux, linux-headers]. Rebooted and all seemed well. However, using my monitor with DVI still does not work right. It works until the gnome display manager loads. It seems like HDMI is somehow a primary output. If I connect HDMI, fully boot into gnome, add DVI, and then remove HDMI... I have DVI as my primary desktop - until I reboot.

Any ideas?

System:
  Kernel: 6.4.12-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: initrd=\initramfs-linux.img
    root=PARTUUID=c4185cd7-52c6-4000-b523-ff3fd4de196b rw
  Desktop: GNOME v: 44.4 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 44.1
    Distro: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: A320M-S2H v: N/A
    serial: <superuser required>
  Mobo: Gigabyte model: A320M-S2H-CF serial: <superuser required>
    UEFI: American Megatrends LLC. v: F55b date: 04/28/2022
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.54 GiB used: 3.22 GiB (20.7%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges
    required.
CPU:
  Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 3
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2625 high: 4166 min/max: 2200/4208 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200
    3: 4056 4: 2334 5: 2128 6: 2049 7: 3591 8: 2200 9: 4166 10: 2200 11: 2186
    12: 2200 bogomips: 86257
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
    sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
    tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme
    vmmcall wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
    protection
  Type: spec_rstack_overflow mitigation: safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
    always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Tonga PRO [Radeon R9 285/380] vendor: PC Partner / Sapphire
    driver: amdgpu v: kernel arch: GCN-3 code: Volcanic Islands
    process: TSMC 28nm built: 2014-19 pcie: gen: 3 speed: 8 GT/s lanes: 8
    link-max: lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DVI-D-1,DVI-D-2
    bus-ID: 08:00.0 chip-ID: 1002:6939 class-ID: 0300 temp: 55.0 C
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
    compositor: gnome-shell driver: X: loaded: amdgpu
    unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: 0
  Monitor-1: HDMI-A-1 model: ASUS VG34V serial: <filter> built: 2023
    res: 3440x1440 dpi: 110 gamma: 1.2 size: 797x334mm (31.38x13.15")
    diag: 864mm (34") modes: max: 2560x1080 min: 720x400
  API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
Audio:
  Device-1: AMD Tonga HDMI Audio [Radeon R9 285/380]
    vendor: PC Partner / Sapphire driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 08:00.1
    chip-ID: 1002:aad8 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0a:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Creative Pebble Pro driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-3:9
    chip-ID: 041e:3287 class-ID: 0102 serial: <filter>
  API: ALSA v: k6.4.12-arch1-1 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 0.3.78 status: off with: wireplumber status: active
    tools: pw-cli,wpctl
  Server-4: PulseAudio v: 16.1 status: active with: 1: pulseaudio-alsa
    type: plugin 2: pulseaudio-jack type: module tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlp6s0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: f000 bus-ID: 07:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  IF-ID-1: docker0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-2: virbr0 state: down mac: <filter>
  IP v4: <filter> scope: global broadcast: <filter>
  IF-ID-3: wg-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
  IP v4: <filter> scope: global
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6.1:6 chip-ID: 8087:0029
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.37 TiB used: 662.29 GiB (47.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P5SSD8
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: P4CR311 temp: 48.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Mushkin model: MKNSSDRE256GB
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 7C scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Mushkin model: MKNSSDSR250GB
    size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 2A0 scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 931.22 GiB size: 915.53 GiB (98.32%)
    used: 355.92 GiB (38.9%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
    label: N/A uuid: 8e57e7a8-7404-48cf-b4e8-2be45f305df5
  ID-2: /boot raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 55.3 MiB (18.5%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
    label: N/A uuid: 7CC5-031E
  ID-3: /mnt/ssd1 raw-size: 238.47 GiB size: 233.67 GiB (97.99%)
    used: 131.27 GiB (56.2%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: SSD1
    uuid: e4cc1477-ad3f-4b63-99f1-83e07b0d347e
  ID-4: /mnt/ssd2 raw-size: 232.88 GiB size: 228.17 GiB (97.98%)
    used: 175.04 GiB (76.7%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: SSD2
    uuid: e741fd09-f932-49fb-a6a5-c3914228c81d
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 9 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-3:9 info: Creative Pebble Pro type: HID,audio
    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 041e:3287 class-ID: 0102 serial: <filter>
  Device-2: 1-4:2 info: Corsair K55 RGB PRO Gaming Keyboard
    type: keyboard,HID driver: usbfs interfaces: 3 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 500mA
    chip-ID: 1b1c:1ba4 class-ID: 0300 serial: <filter>
  Device-3: 1-5:3 info: Kensington Orbit Trackball with Scroll Ring
    type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 047d:2048 class-ID: 0301
  Hub-2: 1-6:4 info: Genesys Logic Hub ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 1-6.1:6 info: Intel AX200 Bluetooth type: bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 8087:0029 class-ID: e001
  Hub-3: 1-7:5 info: Genesys Logic Hub ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 1-9:7 info: Corsair Lighting Node CORE type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 50mA chip-ID: 1b1c:0c1a class-ID: 0300
    serial: <filter>
  Hub-4: 2-0:1 info: super-speed hub ports: 3 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-3:2 info: Innomedia NEOGEOX Arcade Stick type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 1292:4e47 class-ID: 0300
  Hub-6: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 53.8 C mobo: N/A gpu: amdgpu temp: 55.0 C
  Fan Speeds (rpm): N/A gpu: amdgpu fan: 604
Info:
  Processes: 368 Uptime: 30m wakeups: 0 Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 alt: 11/12
  clang: 15.0.7 Packages: 2196 pm: pacman pkgs: 2178 libs: 483
  tools: gnome-software,octopi,pamac,paru,pikaur,yay pm: flatpak pkgs: 18
  Shell: Zsh v: 5.9 running-in: tilix inxi: 3.3.29

Last edited by quietcornerlinux (2023-08-30 21:35:15)

Offline

#2 2023-08-29 17:54:54

quietcornerlinux
Member
Registered: 2022-06-08
Posts: 28

Re: [RESOLVED] Display not working properly when connected via DVI

I have figured out that there is a broken package.

sudo pacman -S qt6-wayland
warning: qt6-wayland-6.5.2-2 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (1) qt6-wayland-6.5.2-2

Total Installed Size:  6.91 MiB
Net Upgrade Size:      0.00 MiB

:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring                     [####################] 100%
(1/1) checking package integrity                   [####################] 100%
(1/1) loading package files                        [####################] 100%
(1/1) checking for file conflicts                  [####################] 100%
(1/1) checking available disk space                [####################] 100%
:: Processing package changes...
(1/1) reinstalling qt6-wayland                     [####################] 100%
ldconfig: File /usr/lib/libQt6LabsSettings.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6Quick.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsWavefrontMesh.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsQmlModels.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2QuickImpl.so.6 is empty, not checked.
ldconfig: File /usr/lib/libuchardet.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsSettings.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsAnimation.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlLocalStorage.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2Utils.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickEffects.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlWorkerScript.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2Impl.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlModels.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libkpathsea.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCore.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2Utils.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickLayouts.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlModels.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsQmlModels.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2Impl.so.6 is empty, not checked.
ldconfig: File /usr/lib/libuchardet.so.0.0.8 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickShapes.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlXmlListModel.so.6 is empty, not checked.
ldconfig: File /usr/lib/libkpathsea.so.6.3.5 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTemplates2.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2Impl.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlLocalStorage.so.6 is empty, not checked.
ldconfig: File /usr/lib/libuchardet.so.0 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlLocalStorage.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTest.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTest.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsSharedImage.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libkpathsea.so is empty, not checked.
ldconfig: File /usr/lib/libQt6Qml.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6Quick.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickParticles.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsAnimation.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickShapes.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickWidgets.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsFolderListModel.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickEffects.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsFolderListModel.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsSharedImage.so.6 is empty, not checked.
ldconfig: File /usr/lib/libtexlua53.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsWavefrontMesh.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libtexluajit.so.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsWavefrontMesh.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickWidgets.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTemplates2.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsQmlModels.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickParticles.so is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so.0 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2QuickImpl.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0.13.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so.0 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsSettings.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsSharedImage.so is empty, not checked.
ldconfig: File /usr/lib/libtexlua53.so.5.3.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTest.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsFolderListModel.so is empty, not checked.
ldconfig: File /usr/lib/libtexluajit.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickWidgets.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlXmlListModel.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi-chains.so is empty, not checked.
ldconfig: File /usr/lib/libQt6LabsAnimation.so.6 is empty, not checked.
ldconfig: File /usr/lib/libtexluajit.so.2.1.0 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlModels.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCompiler.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickTemplates2.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6Qml.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickParticles.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlWorkerScript.so is empty, not checked.
ldconfig: File /usr/lib/libtk8.6.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2QuickImpl.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickLayouts.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libzvbi.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickEffects.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libptexenc.so.1 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlXmlListModel.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCompiler.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickControls2.so is empty, not checked.
ldconfig: File /usr/lib/libptexenc.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCore.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickDialogs2Utils.so is empty, not checked.
ldconfig: File /usr/lib/libptexenc.so.1.4.3 is empty, not checked.
ldconfig: File /usr/lib/libtk.so is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlWorkerScript.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickShapes.so is empty, not checked.
ldconfig: File /usr/lib/libQt6Quick.so.6 is empty, not checked.
ldconfig: File /usr/lib/libtexlua53.so.5 is empty, not checked.
ldconfig: File /usr/lib/libQt6Qml.so.6.5.2 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCore.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QuickLayouts.so.6 is empty, not checked.
ldconfig: File /usr/lib/libQt6QmlCompiler.so.6 is empty, not checked.
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...

https://wiki.archlinux.org/title/Pacman … )%22_error

Guidance requested.

Offline

#3 2023-08-29 17:58:52

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,726

Re: [RESOLVED] Display not working properly when connected via DVI

That's not 'a' broken package, that's a whole lot of broken packages.

Your link is for a different error. You likely need to reinstall all packages. https://wiki.archlinux.org/title/Pacman … l_packages

The question is, why? Is your drive dying? Power loss, hard shutdown at some point? EDIT: oops, didn't read the first post, yeah, you have filesystem corruption because of that unclean shutdown.

Last edited by Scimmia (2023-08-29 18:00:24)

Offline

#4 2023-08-29 19:02:45

quietcornerlinux
Member
Registered: 2022-06-08
Posts: 28

Re: [RESOLVED] Display not working properly when connected via DVI

Scimmia wrote:

That's not 'a' broken package, that's a whole lot of broken packages.

Your link is for a different error. You likely need to reinstall all packages. https://wiki.archlinux.org/title/Pacman … l_packages

The question is, why? Is your drive dying? Power loss, hard shutdown at some point? EDIT: oops, didn't read the first post, yeah, you have filesystem corruption because of that unclean shutdown.

Thank you. Reinstalling all packages, using the overwrite option, resolved all package issues.

All that is left is to resolve the monitor not using DVI issue.

Offline

#5 2023-08-29 19:21:21

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,472

Re: [RESOLVED] Display not working properly when connected via DVI

Afaiu it is /GDM/ that's not using the monitor?
https://wiki.archlinux.org/title/GDM#Se … r_settings

Offline

#6 2023-08-30 21:34:51

quietcornerlinux
Member
Registered: 2022-06-08
Posts: 28

Re: [RESOLVED] Display not working properly when connected via DVI

seth wrote:

Afaiu it is /GDM/ that's not using the monitor?
https://wiki.archlinux.org/title/GDM#Se … r_settings

Thank you for the hint. All is resolved now. I am stumped as to why I even needed to do this in the first place, but glad for a resolution.

The following worked.

$ sudo cp ~/.config/monitors.xml /var/lib/gdm/.config/

I did have success with the following:

$ sudo systemctl edit gdm.service --drop-in=override
[Service]
ExecStartPre=su /bin/cp /home/user/.config/monitors.xml /var/lib/gdm/.config/monitors.xml

Things needed superuser privileges.

Offline

Board footer

Powered by FluxBB