You are not logged in.

Pages: 1 2 3 4

#51 2023-11-15 22:04:38

seth
Member
Registered: 2012-09-03
Posts: 63,397

Re: 7800 XT extremely low FPS on fresh install [Solved]

Did you see the other two posts suggesting "amdgpu.ppfeaturemask=0xfffd3fff" and "amd_iommu=off amdgpu.mcbp=0 "?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#52 2023-11-16 18:57:24

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

I now have

initcall_blacklist=simpledrm_platform_driver_init amdgpu.runpm=0 amdgpu.bapm=0 amdgpu.aspm=0 amdgpu.ppfeaturemask=0xfffd3fff amd_iommu=off amdgpu.mcbp=0 initcall_blacklist=simpledrm_platform_driver_init

I also have VT-d disabled in the BIOS

Boot with the intel GPU into linux-drm-tip-git and the amdgpu: [gfxhub] page fault errors have gone.

xrandr --listproviders

Providers: number : 2
Provider 0: id: 0x47 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 5 associated providers: 1 name:modesetting
Provider 1: id: 0xa0 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 4 outputs: 4 associated providers: 1 name:modesetting
[dik@archlinux ~]$ xrandr --prop
Screen 0: minimum 320 x 200, current 5120 x 1440, maximum 16384 x 16384
HDMI-1 connected primary 5120x1440+0+0 (normal left inverted right x axis y axis) 1200mm x 340mm
	_MUTTER_PRESENTATION_OUTPUT: 0 
	EDID: 
		00ffffffffffff001e6d859e250b0600
		0721010380782278e819c1ae5044af26
		0e5054210900d1c081c0614045400101
		01010101010174d600a0f03840403020
		3a00ae514100001a000000fd0030901e
		e176000a202020202020000000fc004c
		4720554c545241574944450a000000ff
		003330374e544b46424e3036390a03cb
		f0027000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		00000000000000000000000000000000
		0000000000000000000000000000009e
		02034570230907078301000050766160
		5f5e5d3f22201f1312100403016d030c
		002000b83c20006001020367d85dc401
		788063e30f0700e2006ae305c000e606
		0501606028f4b000a0f038354030203a
		00ae514100001a1a6800a0f0381f4030
		203a00ae514100001a6fc200a0a0a055
		5030203500ae514100001a000000008a
		701279030001000ccd2e2a0d0014a005
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 236 
		supported: 236
	non-desktop: 0 
		range: (0, 1)
   5120x1440     71.98*+
   3840x2160     60.00    50.00    59.94    30.00    25.00    24.00    29.97    23.98  
   3840x1080    119.97    99.96    59.97  
   2560x1440    120.00  
   1920x1080    120.00   119.88    60.00    60.00    50.00    59.94    30.00    24.00    29.97    23.98  
   1280x1024     75.02  
   1280x720      60.00    50.00    59.94  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       60.00    59.94  
DP-1 disconnected (normal left inverted right x axis y axis)
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 246 
		supported: 246
	non-desktop: 0 
		range: (0, 1)
HDMI-4 disconnected (normal left inverted right x axis y axis)
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 255 
		supported: 255
	non-desktop: 0 
		range: (0, 1)
DP-4 disconnected (normal left inverted right x axis y axis)
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 259 
		supported: 259
	non-desktop: 0 
		range: (0, 1)
HDMI-5 disconnected (normal left inverted right x axis y axis)
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 267 
		supported: 267
	non-desktop: 0 
		range: (0, 1)
DP-1-2 disconnected (normal left inverted right x axis y axis)
	PRIME Synchronization: 1 
		supported: 0, 1
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
	max bpc: 16 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 93 
		supported: 93
	non-desktop: 0 
		range: (0, 1)
DP-1-3 disconnected (normal left inverted right x axis y axis)
	PRIME Synchronization: 1 
		supported: 0, 1
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
	max bpc: 16 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 101 
		supported: 101
	non-desktop: 0 
		range: (0, 1)
HDMI-1-2 disconnected (normal left inverted right x axis y axis)
	PRIME Synchronization: 1 
		supported: 0, 1
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	max bpc: 16 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 106 
		supported: 106
	non-desktop: 0 
		range: (0, 1)
HDMI-1-3 disconnected (normal left inverted right x axis y axis)
	PRIME Synchronization: 1 
		supported: 0, 1
	HDCP Content Type: HDCP Type0 
		supported: HDCP Type0, HDCP Type1
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	vrr_capable: 0 
		range: (0, 1)
	Colorspace: Default 
		supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	max bpc: 16 
		range: (8, 16)
	underscan vborder: 0 
		range: (0, 128)
	underscan hborder: 0 
		range: (0, 128)
	underscan: off 
		supported: off, on, auto
	scaling mode: None 
		supported: None, Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 112 
		supported: 112
	non-desktop: 0 
		range: (0, 1)

xrandr --output HDMI-1 --set "PRIME Synchronization" 1

X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  140 (RANDR)
  Minor opcode of failed request:  11 (RRQueryOutputProperty)
  Serial number of failed request:  59
  Current serial number in output stream:  59

Last edited by dIQi (2023-11-16 18:59:03)

Offline

#53 2023-11-17 17:48:23

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Just realised my copy / paste must have got a bit excited and I have initcall_blacklist=simpledrm_platform_driver_init twice.  Don't think that matters, please correct me if I'm wrong

Offline

#54 2023-11-17 20:26:23

seth
Member
Registered: 2012-09-03
Posts: 63,397

Re: 7800 XT extremely low FPS on fresh install [Solved]

You can add this as many times as you want. To be sure you can check the system journal whether the simpledrm device still shows up, but it won't.

Still no help on up-clocking the GPU? I guess.

Only the disconnected DP-1-2, DP-1-3,  HDMI-1-2 and HDMI-1-3 have prime sync attributes - it seems it's only available for outputs that are not attached to the main GPU (for regular reverse prime)
So that's a dead end either sad

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#55 2023-11-18 12:52:23

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

DP-1-2, DP-1-3,  HDMI-1-2 and HDMI-1-3 could well be the usb-c connections, what do you think?

Spec is here :  https://www.intel.com/content/dam/suppo … odSpec.pdf

Offline

#56 2023-11-18 13:35:38

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Just found this - some guy is running a NVIDIA 4090 under Rocky Linux 8.5.  Going to try Rocky Linux USB, I've not tried any RPM based Linux yet.  Not holding out a lot of hope

https://www.reddit.com/r/intel/comments … t/jenra7j/

Offline

#57 2023-11-19 20:28:44

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Tried Rocky 9 live but it came with 5.14 which doesn't have 7800 XT support.  Installed on the thumb drive and updated to 6.6 but it was full of amdgpu errors so gave up with it

Decided to try Fedora 39 on the thumb drive.  That came with 6.5.11-300.fc39.x86_64 and gave me the same results.  Updated to 6.7.0-0.rc1.20231119gt037266a5.320.vanilla.fc39.x86_64, same results

Also tried Tumbleweed.  Same results with both 6.6.1-1-default and 6.7~rc1-2.1.g86e46c2

Last edited by dIQi (2023-11-19 20:30:00)

Offline

#58 2023-11-21 11:42:14

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Looks like I might be able to borrow a RX 580 and a GTX 1060 but not for a couple of days

Offline

#59 2023-11-29 01:48:17

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Remembered that overclocking with AMD Navi 31/32/33 will not work until kernel 6.7 at the earliest

Installed 6.7.0-rc3-1-mainline from miffe

Added amdgpu.ppfeaturemask=0xffffffff

CoreCtrl works!

If I set Performance mode to Advanced and change nothing else the GPU memory finally rises above 96Mhz in the benchmark

The result isn't great but it's a step in the right direction

Offline

#60 2023-12-08 21:22:01

muffi
Member
Registered: 2023-12-08
Posts: 3

Re: 7800 XT extremely low FPS on fresh install [Solved]

Nearly the same situation here (NUC13RNGi7 + RX 7900 XT)! Thus, waiting for Kernel 6.7.* is the only solution for now?

Offline

#61 2023-12-11 12:42:15

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

muffi wrote:

Nearly the same situation here (NUC13RNGi7 + RX 7900 XT)! Thus, waiting for Kernel 6.7.* is the only solution for now?

It does look that way

Offline

#62 2023-12-13 20:56:15

causing
Member
Registered: 2023-12-13
Posts: 3

Re: 7800 XT extremely low FPS on fresh install [Solved]

Regarding your The i7-13700K. On Linux there is no prioritization for the p-cores and e-cores. This messed up my game performance. Disable all e-cores in BIOS.

Offline

#63 2023-12-16 15:02:48

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

6.7.0-rc4-1-mainline seemed to regress but 6.7.0-rc5-1-mainline is working again, although I'm still not getting anywhere near what I was getting on my old 4790k

Offline

#64 2023-12-16 15:40:33

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

causing wrote:

Regarding your The i7-13700K. On Linux there is no prioritization for the p-cores and e-cores. This messed up my game performance. Disable all e-cores in BIOS.

Thanks for the information.  I've just tried with all e cores disabled and all e and p cores enabled.  As you can see I'm getting very slightly better results with all cores enabled

6.7.0-rc5-1-mainline is giving better results than 6.7.0-rc3-1-mainline so it looks to be moving in the right direction but it's still not fixed

Offline

#65 2023-12-27 10:57:49

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

I seemed to have missed the 6.7.0-rc6-1-mainline release but 6.7.0-rc7-1-mainline gives me this which is another step backwards

Offline

#66 2023-12-27 14:22:29

seth
Member
Registered: 2012-09-03
Posts: 63,397

Re: 7800 XT extremely low FPS on fresh install [Solved]

That's a really informative benchmark result /sarcasm.
From the looks I'd say it actually ran on the IGP ("Driver: i915")?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#67 2023-12-27 18:31:58

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

nvtop shows me it's running on the amd gpu

The benchmark may not be the best but it's all I have to gauge any progress made in 6.7.  If there's something better I'm open to suggestions.  I'm gradually losing hope for 6.7 getting anywhere near fixing this

Offline

#68 2023-12-27 21:12:08

seth
Member
Registered: 2012-09-03
Posts: 63,397

Re: 7800 XT extremely low FPS on fresh install [Solved]

https://wiki.archlinux.org/title/Benchmarking#Graphics
Are the results w/ the previous rc reproducible (to rule out flukes)?
If so it'd be rather easy to bisect the offending commit and file a bug, fixing by hope it will probably not.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#69 2024-01-02 00:49:51

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

All of the rcs are giving results in the same range and the differences could easily be flukes

Not one single rc has yet given a result more than 20% of what I obtained by moving the drive and gpu to my old 4790k or from running Windows on this machine.  At the same time there's a definite improvement over 6.6

I've just tried rc8 with almost the exact same results as rc7

Still the gpu is working similar to 6.6 with the mem stuck at 97Mhz (depending on monitor refresh rate).  With the 6.7rcs this is the same until I increase the min mem MHz in CoreCtrl from 97 to 98 (or anything).  After that I am able to reset CoreCtrl to default and the mem in nvtop increases above 97Mhz when the benchmark is running

I already have a bug report open here but it's not going anywhere so I'm left with documenting my results

I have no experience bisecting

Offline

#70 2024-01-03 22:56:10

seth
Member
Registered: 2012-09-03
Posts: 63,397

Re: 7800 XT extremely low FPS on fresh install [Solved]

https://wiki.archlinux.org/title/Bisect … s_with_Git - but if it's not a regression and/or there's no reliable test of the impact, that's moot.

If I set Performance mode to Advanced and change nothing else the GPU memory finally rises above 96Mhz in the benchmark

slightly spins up mclk

$ cat /sys/class/drm/card1/device/pp_dpm_mclk
0: 96Mhz 
1: 456Mhz *
2: 772Mhz 
3: 1249Mhz
$ cat /sys/class/drm/card1/device/pp_dpm_sclk
0: 500Mhz
1: 10Mhz *
2: 2025Mhz

but the performance still sucks badly

Is the change likelwise (30%/50%) limited for you?
https://wiki.archlinux.org/title/AMDGPU#Power_profiles
Is https://wiki.archlinux.org/title/AMDGPU … _(default) now possible?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#71 2024-01-08 13:18:33

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

Looks like mainline has gone stable now - 6.7-1

Will test as soon as I can, time poor at the moment

Offline

#72 2024-01-21 18:55:47

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

seth wrote:

Now using 6.7.0-arch3-1

I'm stuck at around 20% of what I'd expect from testing with Windows and my old 4th gen i7


ls /sys/kernel/debug/dri/2/amdgpu_pm_info
/sys/kernel/debug/dri/2/amdgpu_pm_info

cd /sys/class/drm/card2/device/

cat power_dpm_force_performance_level
auto

echo "manual" > power_dpm_force_performance_level

cat power_dpm_force_performance_level
manual

cat pp_power_profile_mode

 0 BOOTUP_DEFAULT*:
                    0(       GFXCLK)       0       1       0       4     800 4587520  -65536       0
                    1(         FCLK)       0       3       0       1       0 3276800  -65536   -6553
 1 3D_FULL_SCREEN :
                    0(       GFXCLK)       0       0    1200       4     650 3932160   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 2   POWER_SAVING :
                    0(       GFXCLK)       0       1       0       3       0 5898240  -65536       0
                    1(         FCLK)       0       1       0       1       0 3407872  -65536   -6553
 3          VIDEO :
                    0(       GFXCLK)       0       1       0       4     500 4587520  -65536       0
                    1(         FCLK)       0       3       0       3       0 3473408  -65536   -6553
 4             VR :
                    0(       GFXCLK)       0       2    1000       1       0 3276800       0       0
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 5        COMPUTE :
                    0(       GFXCLK)       0       2    1000       1       0 3932160       0       0
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 6         CUSTOM :
                    0(       GFXCLK)       0       0    1200       4       0  655360   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 7      WINDOW_3D :
                    0(       GFXCLK)       0       0    1200       4     650 3932160   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553

At this point mem is still stuck at 96MHz in the benchmark

echo "1" > pp_power_profile_mode

cat pp_power_profile_mode

 0 BOOTUP_DEFAULT :
                    0(       GFXCLK)       0       1       0       4     800 4587520  -65536       0
                    1(         FCLK)       0       3       0       1       0 3276800  -65536   -6553
 1 3D_FULL_SCREEN*:
                    0(       GFXCLK)       0       0    1200       4     650 3932160   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 2   POWER_SAVING :
                    0(       GFXCLK)       0       1       0       3       0 5898240  -65536       0
                    1(         FCLK)       0       1       0       1       0 3407872  -65536   -6553
 3          VIDEO :
                    0(       GFXCLK)       0       1       0       4     500 4587520  -65536       0
                    1(         FCLK)       0       3       0       3       0 3473408  -65536   -6553
 4             VR :
                    0(       GFXCLK)       0       2    1000       1       0 3276800       0       0
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 5        COMPUTE :
                    0(       GFXCLK)       0       2    1000       1       0 3932160       0       0
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 6         CUSTOM :
                    0(       GFXCLK)       0       0    1200       4       0  655360   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553
 7      WINDOW_3D :
                    0(       GFXCLK)       0       0    1200       4     650 3932160   -3276  -65536
                    1(         FCLK)       0       3       0       3       0 1310720   -6553   -6553

Mem still stuck at 96MHz

cat pp_dpm_mclk

0: 96Mhz *
1: 456Mhz 
2: 772Mhz 
3: 1218Mhz

echo "3" > pp_dpm_mclk

cat pp_dpm_mclk

0: 96Mhz *
1: 456Mhz 
2: 772Mhz 
3: 1218Mhz

Still stuck at 96Mhz in the benchmark

corectrl 1.3.9-1

Set performance mode to Advanced

Increase Memory minimum from 97 to 98 and apply (not sure why that's 97 not 96)

Memory is now no longer stuck at 96Mhz in the benchmark.  However performance is ~20% of expected

In corectrl choose Reset - "Do you want to load the default settings" - Yes

Performance mode is now set to Automatic again and the mem is not stuck at 96Mhz in the benchmark.  Performance is ~20% of expected

Last edited by dIQi (2024-01-21 19:28:07)

Offline

#73 2024-01-21 19:14:26

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

This is what I'm getting in the benchmark now, nowhere near what I got on my 4th gen i7

Offline

#74 2024-01-22 11:23:27

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 13,616

Re: 7800 XT extremely low FPS on fresh install [Solved]

Your 4th gen i7 uses a hybrid graphics setup where superposition runs on the intel i915 driver.

The current setup is not a hybrid setup (either the cpu has no internal intel graphics or they are disabled) and runs superpostion on the amdgpu driver.

Please stop comparing oranges to pears.

Last edited by Lone_Wolf (2024-01-22 11:24:01)

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#75 2024-01-22 19:05:29

dIQi
Member
Registered: 2023-11-04
Posts: 68

Re: 7800 XT extremely low FPS on fresh install [Solved]

I had a very similar, although slightly higher, result running Windows on my current machine to what the 4th Gen i7 achieved

Both had results in the same region as the phoronix article so I presume the GPU works as it should in those situations

Last edited by dIQi (2024-01-22 19:07:06)

Offline

Pages: 1 2 3 4

Board footer

Powered by FluxBB