You are not logged in.

Pages: 1

#1 2023-12-08 20:29:45

michalp2213
Member
From: Poland
Registered: 2013-02-23
Posts: 6

No audio on fresh install

I just installed arch and don't have audio with pulseaudio on jack connectors (I don't have speakers in my monitor, so can't check if it works on hdmi). I made sure all the channels are unmuted and added user to audio group.

I run these commands while playing a video in Firefox:

$ pacmd list-sink-inputs

1 sink input(s) available.
    index: 38
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 12 <alsa_output.pci-0000_0d_00.6.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 104.22 ms
	requested latency: 75.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: speex-float-1
	module: 10
	client: 13 <Firefox>
	properties:
		media.name = "YouTube"
		application.name = "Firefox"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "738"
		application.process.user = "michalp2213"
		application.process.host = "panek-pc"
		application.process.binary = "firefox"
		application.language = "en_GB.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "5840d3d184fc43a988af0764d636918e"
		application.process.session_id = "1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"
$ sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  michalp2213       616 F.... pulseaudio
/dev/snd/controlC1:  michalp2213       616 F.... pulseaudio
/dev/snd/controlC2:  michalp2213       616 F.... pulseaudio
/dev/snd/pcmC2D0c:   michalp2213       616 F...m pulseaudio
/dev/snd/pcmC2D0p:   michalp2213       616 F...m pulseaudio
$ aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
sysdefault:CARD=Generic_1
    HD-Audio Generic, ALC897 Analog
    Default Audio Device
front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    Front output / input
surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC897 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
usbstream:CARD=Generic_1
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Generic_1 [HD-Audio Generic], device 0: ALC897 Analog [ALC897 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
$ pacmd list-cards

3 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 112"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "10fa"
		device.string = "0"
		device.description = "HDA NVidia"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_0d_00.1>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc588000 irq 113"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0d:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.string = "1"
		device.description = "Renoir Radeon High Definition Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 2
	name: <alsa_card.pci-0000_0d_00.6>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc580000 irq 114"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0d:00.6"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.6/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.string = "2"
		device.description = "Family 17h/19h HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: no)
		output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_0d_00.6.analog-stereo/#12: Family 17h/19h HD Audio Controller Analog Stereo
	sources:
		alsa_output.pci-0000_0d_00.6.analog-stereo.monitor/#17: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
		alsa_input.pci-0000_0d_00.6.analog-stereo/#18: Family 17h/19h HD Audio Controller Analog Stereo
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
$ amixer -c2

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 0 [0%] [-65.25dB] [off]
  Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 254 [100%] [-0.20dB]
  Front Right: Playback 254 [100%] [-0.20dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Line Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 3 [100%] [30.00dB]
  Front Right: 3 [100%] [30.00dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 31 [100%] [12.00dB] [on]
  Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 63 [100%] [30.00dB] [on]
  Front Right: Capture 63 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 63
  Front Left: Capture 0 [0%] [-17.25dB] [off]
  Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Channel Mode',0
  Capabilities: enum
  Items: '2ch' '4ch' '6ch'
  Item0: '2ch'
Simple mixer control 'Input Source',0
  Capabilities: cenum
  Items: 'Mic' 'Line'
  Item0: 'Mic'
Simple mixer control 'Input Source',1
  Capabilities: cenum
  Items: 'Mic' 'Line'
  Item0: 'Mic'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
$ sudo dmesg | grep -iE 'snd|sof'

[    0.026998] software IO TLB: area num 32.
[    0.316113] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.604669] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.604672] software IO TLB: mapped [mem 0x00000000ae60d000-0x00000000b260d000] (64MB)
[    0.715955] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.715967] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    7.069085] snd_hda_intel 0000:01:00.1: enabling device (0100 -> 0102)
[    7.069166] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.069173] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.069241] snd_hda_intel 0000:0d:00.1: enabling device (0100 -> 0102)
[    7.069358] snd_hda_intel 0000:0d:00.6: enabling device (0100 -> 0102)
[    7.080511] snd_hda_intel 0000:0d:00.1: bound 0000:0d:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    7.100228] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.100233] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.100236] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.100238] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    7.100240] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    7.100242] snd_hda_codec_realtek hdaudioC2D0:      Mic=0x18
[    7.100245] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
$ journalctl -b --user-unit=pulseaudio

Dec 08 21:16:10 panek-pc systemd[573]: Starting Sound Service...
Dec 08 21:16:10 panek-pc systemd[573]: Started Sound Service.

Offline

#2 2023-12-09 17:53:08

xerxes_
Member
Registered: 2018-04-29
Posts: 1,058

Re: No audio on fresh install

Post output of 'lspci -k'. You don't have audio from beginning of system boot or you loose it later? Does it happen in every boot?

There should be no need to add user to audio group. How did you checked if sound is not muted? You can check it also in alsamixer (press F3 - F6 for other cards and inputs/outputs), pulsemixer and pavucontrol.

Offline

#3 2023-12-09 22:43:08

michalp2213
Member
From: Poland
Registered: 2013-02-23
Posts: 6

Re: No audio on fresh install

There is no audio from the beginning and on every boot. I checked all the cards in alsamixer as well as pavucontrol. After posting here I tried disabling the unused cards (enable kernel module parameter for snd_hda_intel), leaving only card 2. I also tried setting different values of ac97_quirk parameter, as suggested in https://wiki.archlinux.org/title/Advanc … PC_speaker. Neither helped. I also found this thread: https://forum.artixlinux.org/index.php/ … 837.0.html, the author had no audio with the same card and finally got it working, unfortunately he only said it was a permission issue without elaborating any further, so it wasn't helpful.

$ lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Kernel driver in use: pcieport
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Kernel driver in use: pcieport
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
	Subsystem: Hewlett-Packard Company FCH SMBus Controller
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: Hewlett-Packard Company FCH LPC Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 VGA compatible controller: NVIDIA Corporation TU117 [GeForce GTX 1650] (rev a1)
	Subsystem: Hewlett-Packard Company TU117 [GeForce GTX 1650]
	Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation Device 10fa (rev a1)
	Subsystem: Hewlett-Packard Company Device 8558
	Kernel modules: snd_hda_intel
02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43d1 (rev 01)
	Subsystem: ASMedia Technology Inc. Device 1142
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
02:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset SATA Controller
	Kernel driver in use: ahci
02:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Bridge
	Kernel driver in use: pcieport
03:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
03:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
	Subsystem: ASMedia Technology Inc. 400 Series Chipset PCIe Port
	Kernel driver in use: pcieport
0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter
	Subsystem: Hewlett-Packard Company RTL8822CE 802.11ac PCIe Wireless Network Adapter
	Kernel driver in use: rtw_8822ce
	Kernel modules: rtw88_8822ce
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 16)
	Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
	Kernel driver in use: r8169
	Kernel modules: r8169
0c:00.0 Non-Volatile memory controller: SK hynix Gold P31/BC711/PC711 NVMe Solid State Drive
	Subsystem: SK hynix Gold P31/BC711/PC711 NVMe Solid State Drive
	Kernel driver in use: nvme
	Kernel modules: nvme
0d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c9)
	DeviceName: OnBoard IGD
	Subsystem: Hewlett-Packard Company Cezanne [Radeon Vega Series / Radeon Vega Mobile Series]
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
0d:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller
	Subsystem: Hewlett-Packard Company Renoir Radeon High Definition Audio Controller
	Kernel modules: snd_hda_intel
0d:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
	Subsystem: Hewlett-Packard Company Family 17h (Models 10h-1fh) Platform Security Processor
	Kernel driver in use: ccp
	Kernel modules: ccp
0d:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: Hewlett-Packard Company Renoir/Cezanne USB 3.1
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
0d:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: Hewlett-Packard Company Renoir/Cezanne USB 3.1
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
0d:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
	Subsystem: Hewlett-Packard Company Family 17h/19h HD Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
0e:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
	Subsystem: Hewlett-Packard Company FCH SATA Controller [AHCI mode]
	Kernel driver in use: ahci
0e:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
	Subsystem: Hewlett-Packard Company FCH SATA Controller [AHCI mode]
	Kernel driver in use: ahci

Offline

#4 2023-12-10 12:39:09

xerxes_
Member
Registered: 2018-04-29
Posts: 1,058

Re: No audio on fresh install

For me it looks like you have to change default sound card from nvidia's card0 to card1 or card2 (as it display aplay -lL on end).
Try to play something by this command:

aplay -D sysdefault path/to/music.wav/mp3/m4a

If you hear something, even noise, you will know you have to switch output to other card.
You may try also: default, pulse, speex (-c 1), upmix, front, etc., for example:

aplay -c 2 -D surround71 -f S16_LE some_music

and others similar.

Last edited by xerxes_ (2023-12-10 12:49:10)

Offline

#5 2023-12-10 14:19:25

michalp2213
Member
From: Poland
Registered: 2013-02-23
Posts: 6

Re: No audio on fresh install

Unfortunately, it doesn't work with either of these options. With sysdefault everything looks like it's working, no errors from aplay and pavucontrol shows it's playing on the correct card, there's just no sound.

Offline

#6 2023-12-10 17:31:17

xerxes_
Member
Registered: 2018-04-29
Posts: 1,058

Re: No audio on fresh install

Add to kernel boot options: 'snd_hda_intel index=1' or 2
How to do that depends from your boot loader: https://wiki.archlinux.org/title/Kernel_parameters
Someone had similar problem: https://bbs.archlinux.org/viewtopic.php?id=268397 https://bbs.archlinux.org/viewtopic.php?id=252365

Last edited by xerxes_ (2023-12-10 17:45:48)

Offline

#7 2023-12-10 19:55:48

michalp2213
Member
From: Poland
Registered: 2013-02-23
Posts: 6

Re: No audio on fresh install

If I understand this solution correctly, I should set index=0,1,2 (or 1, 2, 3, whatever), as there are three audio cards. If I am correct, than this unfortunately didn't work either (I also tried enable=0,0,1 index=-1,-1,0). One more output that might be useful, module parameter values for snd_hda_intel:

$ systool -vm snd_hda_intel

Module = "snd_hda_intel"

  Attributes:
    coresize            = "65536"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "3"
    srcversion          = "3D352566FECD98F86225DAF"
    taint               = ""
    uevent              = <store method only>

  Parameters:
    align_buffer_size   = "-1"
    bdl_pos_adj         = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    beep_mode           = "N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N"
    ctl_dev_id          = "N"
    dmic_detect         = "Y"
    enable_msi          = "-1"
    enable              = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id                  = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index               = "1,2,3,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    jackpoll_ms         = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    model               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    patch               = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    pm_blacklist        = "Y"
    position_fix        = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    power_save          = "10"
    power_save_controller= "Y"
    probe_mask          = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    probe_only          = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    single_cmd          = "-1"
    snoop               = "-1"

  Sections:

Offline

#8 2023-12-10 20:13:19

xerxes_
Member
Registered: 2018-04-29
Posts: 1,058

Re: No audio on fresh install

According to output of command 'pacmd list-cards' you have 3 cards with indexes 0 to 2 (with 0 is nvidia which don't play).
The point was to set it as kernel boot parameter, for example 'snd_hda_intel index=1' and reboot the system to see if that work.
You may also write "options snd_hda_intel index=1" to /etc/modprobe.d/default.conf file for permanent change and reboot and see.

Offline

#9 2023-12-11 21:42:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,173

Re: No audio on fresh install

@xerxes_ That can't and won't fix anything. The index number matters very little when pulseaudio is involved

There's a headphone channel that's muted, maybe your jack sensing is off.

Can you configure 

pacmd set-sink-port alsa_output.pci-0000_0d_00.6.analog-stereo  analog-output-headphones
amixer -c2 set 'Headphone',0 100% 100%

Last edited by V1del (2023-12-11 21:43:35)

Online

#10 2023-12-12 20:30:31

michalp2213
Member
From: Poland
Registered: 2013-02-23
Posts: 6

Re: No audio on fresh install

V1del wrote:

Can you configure 

pacmd set-sink-port alsa_output.pci-0000_0d_00.6.analog-stereo  analog-output-headphones
amixer -c2 set 'Headphone',0 100% 100%

Unfortunately that doesn't work either. Also, jack sensing seems fine, because pavucontrol correctly shows which jacks have speakers/headphones plugged in.

Offline

Pages: 1

Board footer

Powered by FluxBB