You are not logged in.

Pages: 1

#1 2023-12-15 18:56:57

bisarch
Member
Registered: 2020-04-07
Posts: 60

External monitor not detected since last update

Hi. I am running Arch Linux on my Dell Laptop. The external monitor connected via HDMI stopped working when I rebooted after updating all the packages using yay and then manually installing xorg-fonts-100dpi this morning.

Here is the output if inxi -F

System:
  Host: redacteddell Kernel: 6.6.7-arch1-1 arch: x86_64 bits: 64
    Desktop: KDE Plasma v: 5.27.10 Distro: Arch Linux
Machine:
  Type: Laptop System: Dell product: Latitude E5470 v: N/A
    serial: <superuser required>
  Mobo: Dell model: N/A serial: <superuser required> UEFI-[Legacy]: Dell
    v: 1.18.6 date: 12/08/2017
Battery:
  ID-1: BAT0 charge: 62.0 Wh (100.0%) condition: 62.0/62.0 Wh (100.0%)
CPU:
  Info: dual core model: Intel Core i5-6300U bits: 64 type: MT MCP cache:
    L2: 512 KiB
  Speed (MHz): avg: 900 min/max: 400/3000 cores: 1: 900 2: 900 3: 900 4: 900
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] driver: i915 v: kernel
  Device-2: Realtek Integrated_Webcam_HD driver: uvcvideo type: USB
  Display: x11 server: X.Org v: 21.1.10 driver: X: loaded: modesetting
    dri: iris gpu: i915 resolution: 1366x768~60Hz
  API: EGL v: 1.5 drivers: iris,swrast platforms: x11,surfaceless,device
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 23.2.1-arch1.2
    renderer: Mesa Intel HD Graphics 520 (SKL GT2)
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
  API: ALSA v: k6.6.7-arch1-1 status: kernel-api
  Server-1: PipeWire v: 1.0.0 status: active
Network:
  Device-1: Intel Ethernet I219-LM driver: e1000e
  IF: enp0s31f6 state: down mac: d4:81:d7:cd:2a:56
  Device-2: Intel Wireless 8260 driver: iwlwifi
  IF: wlp1s0 state: up mac: 14:ab:c5:be:44:ed
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb type: USB
  Report: btmgmt ID: hci0 state: up address: 14:AB:C5:BE:44:F1 bt-v: 4.2
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
Drives:
  Local Storage: total: 476.94 GiB used: 345.69 GiB (72.5%)
  ID-1: /dev/sda vendor: Kingfast model: N/A size: 476.94 GiB
Partition:
  ID-1: / size: 461.55 GiB used: 345.45 GiB (74.8%) fs: ext4 dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 6.94 GiB used: 238.8 MiB (3.4%)
    dev: /dev/sda2
Sensors:
  System Temperatures: cpu: 58.0 C pch: 47.0 C mobo: 41.0 C sodimm: SODIMM C
  Fan Speeds (rpm): cpu: 0
Info:
  Processes: 237 Uptime: 15m Memory: total: 16 GiB note: est.
  available: 15.45 GiB used: 4.03 GiB (26.1%) Shell: Bash inxi: 3.3.31

System:
  Host: redacteddell Kernel: 6.6.7-arch1-1 arch: x86_64 bits: 64
    Desktop: KDE Plasma v: 5.27.10 Distro: Arch Linux
Machine:
  Type: Laptop System: Dell product: Latitude E5470 v: N/A
    serial: <superuser required>
  Mobo: Dell model: N/A serial: <superuser required> UEFI-[Legacy]: Dell
    v: 1.18.6 date: 12/08/2017
Battery:
  ID-1: BAT0 charge: 62.0 Wh (100.0%) condition: 62.0/62.0 Wh (100.0%)
CPU:
  Info: dual core model: Intel Core i5-6300U bits: 64 type: MT MCP cache:
    L2: 512 KiB
  Speed (MHz): avg: 900 min/max: 400/3000 cores: 1: 900 2: 900 3: 900 4: 900
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] driver: i915 v: kernel
  Device-2: Realtek Integrated_Webcam_HD driver: uvcvideo type: USB
  Display: x11 server: X.Org v: 21.1.10 driver: X: loaded: modesetting
    dri: iris gpu: i915 resolution: 1366x768~60Hz
  API: EGL v: 1.5 drivers: iris,swrast platforms: x11,surfaceless,device
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 23.2.1-arch1.2
    renderer: Mesa Intel HD Graphics 520 (SKL GT2)
  API: Vulkan Message: No Vulkan data available.
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
  API: ALSA v: k6.6.7-arch1-1 status: kernel-api
  Server-1: PipeWire v: 1.0.0 status: active
Network:
  Device-1: Intel Ethernet I219-LM driver: e1000e
  IF: enp0s31f6 state: down mac: d4:81:d7:cd:2a:56
  Device-2: Intel Wireless 8260 driver: iwlwifi
  IF: wlp1s0 state: up mac: 14:ab:c5:be:44:ed
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb type: USB
  Report: btmgmt ID: hci0 state: up address: 14:AB:C5:BE:44:F1 bt-v: 4.2
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
Drives:
  Local Storage: total: 476.94 GiB used: 345.69 GiB (72.5%)
  ID-1: /dev/sda vendor: Kingfast model: N/A size: 476.94 GiB
Partition:
  ID-1: / size: 461.55 GiB used: 345.45 GiB (74.8%) fs: ext4 dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 6.94 GiB used: 238.8 MiB (3.4%)
    dev: /dev/sda2
Sensors:
  System Temperatures: cpu: 58.0 C pch: 47.0 C mobo: 41.0 C sodimm: SODIMM C
  Fan Speeds (rpm): cpu: 0
Info:
  Processes: 237 Uptime: 15m Memory: total: 16 GiB note: est.
  available: 15.45 GiB used: 4.03 GiB (26.1%) Shell: Bash inxi: 3.3.31
$ xrandr --verbose

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 16384 x 16384
eDP-1 connected primary 1366x768+0+0 (0x45) normal (normal left inverted right x axis y axis) 309mm x 173mm
	Identifier: 0x41
	Timestamp:  16481
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	_KDE_SCREEN_INDEX: 1 
	EDID: 
		00ffffffffffff0009e5b60600000000
		011a0104951f11780224109759548e27
		1e505400000001010101010101010101
		010101010101641b5677500013303020
		360035ad1000001a7017568c50003e30
		3020360035ad1000001a000000fe0030
		4338574a804e5431344e343100000000
		00014121960010000009010a202000f3
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	panel orientation: Normal 
		supported: Normal, Upside Down, Left Side Up, Right Side Up
	scaling mode: Full aspect 
		supported: Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 95 
		supported: 95
	non-desktop: 0 
		range: (0, 1)
  1366x768 (0x45) 70.120MHz +HSync -VSync *current +preferred
        h: width  1366 start 1414 end 1446 total 1485 skew    0 clock  47.22KHz
        v: height  768 start  771 end  777 total  787           clock  60.00Hz
  1366x768 (0x46) 60.000MHz +HSync -VSync
        h: width  1366 start 1414 end 1446 total 1506 skew    0 clock  39.84KHz
        v: height  768 start  771 end  777 total  830           clock  48.00Hz
  1280x720 (0x47) 156.125MHz -HSync +VSync DoubleScan
        h: width  1280 start 1376 end 1512 total 1744 skew    0 clock  89.52KHz
        v: height  720 start  721 end  724 total  746           clock  60.00Hz
  1280x720 (0x48) 120.750MHz +HSync -VSync DoubleScan
        h: width  1280 start 1304 end 1320 total 1360 skew    0 clock  88.79KHz
        v: height  720 start  721 end  724 total  740           clock  59.99Hz
  1280x720 (0x49) 74.500MHz -HSync +VSync
        h: width  1280 start 1344 end 1472 total 1664 skew    0 clock  44.77KHz
        v: height  720 start  723 end  728 total  748           clock  59.86Hz
  1280x720 (0x4a) 63.750MHz +HSync -VSync
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  44.27KHz
        v: height  720 start  723 end  728 total  741           clock  59.74Hz
  1024x768 (0x4b) 133.475MHz -HSync +VSync DoubleScan
        h: width  1024 start 1100 end 1212 total 1400 skew    0 clock  95.34KHz
        v: height  768 start  768 end  770 total  794           clock  60.04Hz
  1024x768 (0x4c) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  960x720 (0x4d) 117.000MHz -HSync +VSync DoubleScan
        h: width   960 start 1024 end 1128 total 1300 skew    0 clock  90.00KHz
        v: height  720 start  720 end  722 total  750           clock  60.00Hz
  928x696 (0x4e) 109.150MHz -HSync +VSync DoubleScan
        h: width   928 start  976 end 1088 total 1264 skew    0 clock  86.35KHz
        v: height  696 start  696 end  698 total  719           clock  60.05Hz
  896x672 (0x4f) 102.400MHz -HSync +VSync DoubleScan
        h: width   896 start  960 end 1060 total 1224 skew    0 clock  83.66KHz
        v: height  672 start  672 end  674 total  697           clock  60.01Hz
  1024x576 (0x50) 98.500MHz -HSync +VSync DoubleScan
        h: width  1024 start 1092 end 1200 total 1376 skew    0 clock  71.58KHz
        v: height  576 start  577 end  580 total  597           clock  59.95Hz
  1024x576 (0x51) 78.375MHz +HSync -VSync DoubleScan
        h: width  1024 start 1048 end 1064 total 1104 skew    0 clock  70.99KHz
        v: height  576 start  577 end  580 total  592           clock  59.96Hz
  1024x576 (0x52) 46.500MHz -HSync +VSync
        h: width  1024 start 1064 end 1160 total 1296 skew    0 clock  35.88KHz
        v: height  576 start  579 end  584 total  599           clock  59.90Hz
  1024x576 (0x53) 42.000MHz +HSync -VSync
        h: width  1024 start 1072 end 1104 total 1184 skew    0 clock  35.47KHz
        v: height  576 start  579 end  584 total  593           clock  59.82Hz
  960x600 (0x54) 96.625MHz -HSync +VSync DoubleScan
        h: width   960 start 1028 end 1128 total 1296 skew    0 clock  74.56KHz
        v: height  600 start  601 end  604 total  622           clock  59.93Hz
  960x600 (0x55) 77.000MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  74.04KHz
        v: height  600 start  601 end  604 total  617           clock  60.00Hz
  960x540 (0x56) 86.500MHz -HSync +VSync DoubleScan
        h: width   960 start 1024 end 1124 total 1288 skew    0 clock  67.16KHz
        v: height  540 start  541 end  544 total  560           clock  59.96Hz
  960x540 (0x57) 69.250MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  66.59KHz
        v: height  540 start  541 end  544 total  555           clock  59.99Hz
  960x540 (0x58) 40.750MHz -HSync +VSync
        h: width   960 start  992 end 1088 total 1216 skew    0 clock  33.51KHz
        v: height  540 start  543 end  548 total  562           clock  59.63Hz
  960x540 (0x59) 37.250MHz +HSync -VSync
        h: width   960 start 1008 end 1040 total 1120 skew    0 clock  33.26KHz
        v: height  540 start  543 end  548 total  556           clock  59.82Hz
  800x600 (0x5a) 81.000MHz +HSync +VSync DoubleScan
        h: width   800 start  832 end  928 total 1080 skew    0 clock  75.00KHz
        v: height  600 start  600 end  602 total  625           clock  60.00Hz
  800x600 (0x5b) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x5c) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  840x525 (0x5d) 73.125MHz -HSync +VSync DoubleScan
        h: width   840 start  892 end  980 total 1120 skew    0 clock  65.29KHz
        v: height  525 start  526 end  529 total  544           clock  60.01Hz
  840x525 (0x5e) 59.500MHz +HSync -VSync DoubleScan
        h: width   840 start  864 end  880 total  920 skew    0 clock  64.67KHz
        v: height  525 start  526 end  529 total  540           clock  59.88Hz
  864x486 (0x5f) 32.500MHz -HSync +VSync
        h: width   864 start  888 end  968 total 1072 skew    0 clock  30.32KHz
        v: height  486 start  489 end  494 total  506           clock  59.92Hz
  864x486 (0x60) 30.500MHz +HSync -VSync
        h: width   864 start  912 end  944 total 1024 skew    0 clock  29.79KHz
        v: height  486 start  489 end  494 total  500           clock  59.57Hz
  700x525 (0x61) 61.000MHz +HSync +VSync DoubleScan
        h: width   700 start  744 end  820 total  940 skew    0 clock  64.89KHz
        v: height  525 start  526 end  532 total  541           clock  59.98Hz
  800x450 (0x62) 59.125MHz -HSync +VSync DoubleScan
        h: width   800 start  848 end  928 total 1056 skew    0 clock  55.99KHz
        v: height  450 start  451 end  454 total  467           clock  59.95Hz
  800x450 (0x63) 48.750MHz +HSync -VSync DoubleScan
        h: width   800 start  824 end  840 total  880 skew    0 clock  55.40KHz
        v: height  450 start  451 end  454 total  463           clock  59.82Hz
  640x512 (0x64) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  664 end  720 total  844 skew    0 clock  63.98KHz
        v: height  512 start  512 end  514 total  533           clock  60.02Hz
  700x450 (0x65) 51.750MHz -HSync +VSync DoubleScan
        h: width   700 start  740 end  812 total  924 skew    0 clock  56.01KHz
        v: height  450 start  451 end  456 total  467           clock  59.96Hz
  700x450 (0x66) 43.250MHz +HSync -VSync DoubleScan
        h: width   700 start  724 end  740 total  780 skew    0 clock  55.45KHz
        v: height  450 start  451 end  456 total  463           clock  59.88Hz
  640x480 (0x67) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  688 end  744 total  900 skew    0 clock  60.00KHz
        v: height  480 start  480 end  482 total  500           clock  60.00Hz
  640x480 (0x68) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  720x405 (0x69) 22.500MHz -HSync +VSync
        h: width   720 start  744 end  808 total  896 skew    0 clock  25.11KHz
        v: height  405 start  408 end  413 total  422           clock  59.51Hz
  720x405 (0x6a) 21.750MHz +HSync -VSync
        h: width   720 start  768 end  800 total  880 skew    0 clock  24.72KHz
        v: height  405 start  408 end  413 total  419           clock  58.99Hz
  684x384 (0x6b) 42.625MHz -HSync +VSync DoubleScan
        h: width   684 start  720 end  788 total  892 skew    0 clock  47.79KHz
        v: height  384 start  385 end  390 total  399           clock  59.88Hz
  684x384 (0x6c) 36.125MHz +HSync -VSync DoubleScan
        h: width   684 start  708 end  724 total  764 skew    0 clock  47.28KHz
        v: height  384 start  385 end  390 total  395           clock  59.85Hz
  640x400 (0x6d) 41.750MHz -HSync +VSync DoubleScan
        h: width   640 start  676 end  740 total  840 skew    0 clock  49.70KHz
        v: height  400 start  401 end  404 total  415           clock  59.88Hz
  640x400 (0x6e) 35.500MHz +HSync -VSync DoubleScan
        h: width   640 start  664 end  680 total  720 skew    0 clock  49.31KHz
        v: height  400 start  401 end  404 total  411           clock  59.98Hz
  640x360 (0x6f) 37.250MHz -HSync +VSync DoubleScan
        h: width   640 start  672 end  736 total  832 skew    0 clock  44.77KHz
        v: height  360 start  361 end  364 total  374           clock  59.86Hz
  640x360 (0x70) 31.875MHz +HSync -VSync DoubleScan
        h: width   640 start  664 end  680 total  720 skew    0 clock  44.27KHz
        v: height  360 start  361 end  364 total  370           clock  59.83Hz
  640x360 (0x71) 18.000MHz -HSync +VSync
        h: width   640 start  664 end  720 total  800 skew    0 clock  22.50KHz
        v: height  360 start  363 end  368 total  376           clock  59.84Hz
  640x360 (0x72) 17.750MHz +HSync -VSync
        h: width   640 start  688 end  720 total  800 skew    0 clock  22.19KHz
        v: height  360 start  363 end  368 total  374           clock  59.32Hz
  512x384 (0x73) 32.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  672 skew    0 clock  48.36KHz
        v: height  384 start  385 end  388 total  403           clock  60.00Hz
  512x288 (0x74) 23.250MHz -HSync +VSync DoubleScan
        h: width   512 start  532 end  580 total  648 skew    0 clock  35.88KHz
        v: height  288 start  289 end  292 total  299           clock  60.00Hz
  512x288 (0x75) 21.000MHz +HSync -VSync DoubleScan
        h: width   512 start  536 end  552 total  592 skew    0 clock  35.47KHz
        v: height  288 start  289 end  292 total  296           clock  59.92Hz
  480x270 (0x76) 20.375MHz -HSync +VSync DoubleScan
        h: width   480 start  496 end  544 total  608 skew    0 clock  33.51KHz
        v: height  270 start  271 end  274 total  281           clock  59.63Hz
  480x270 (0x77) 18.625MHz +HSync -VSync DoubleScan
        h: width   480 start  504 end  520 total  560 skew    0 clock  33.26KHz
        v: height  270 start  271 end  274 total  278           clock  59.82Hz
  400x300 (0x78) 20.000MHz +HSync +VSync DoubleScan
        h: width   400 start  420 end  484 total  528 skew    0 clock  37.88KHz
        v: height  300 start  300 end  302 total  314           clock  60.32Hz
  400x300 (0x79) 18.000MHz +HSync +VSync DoubleScan
        h: width   400 start  412 end  448 total  512 skew    0 clock  35.16KHz
        v: height  300 start  300 end  301 total  312           clock  56.34Hz
  432x243 (0x7a) 16.250MHz -HSync +VSync DoubleScan
        h: width   432 start  444 end  484 total  536 skew    0 clock  30.32KHz
        v: height  243 start  244 end  247 total  253           clock  59.92Hz
  432x243 (0x7b) 15.250MHz +HSync -VSync DoubleScan
        h: width   432 start  456 end  472 total  512 skew    0 clock  29.79KHz
        v: height  243 start  244 end  247 total  250           clock  59.57Hz
  320x240 (0x7c) 12.587MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  376 total  400 skew    0 clock  31.47KHz
        v: height  240 start  245 end  246 total  262           clock  60.05Hz
  360x202 (0x7d) 11.250MHz -HSync +VSync DoubleScan
        h: width   360 start  372 end  404 total  448 skew    0 clock  25.11KHz
        v: height  202 start  204 end  206 total  211           clock  59.51Hz
  360x202 (0x7e) 10.875MHz +HSync -VSync DoubleScan
        h: width   360 start  384 end  400 total  440 skew    0 clock  24.72KHz
        v: height  202 start  204 end  206 total  209           clock  59.13Hz
  320x180 (0x7f)  9.000MHz -HSync +VSync DoubleScan
        h: width   320 start  332 end  360 total  400 skew    0 clock  22.50KHz
        v: height  180 start  181 end  184 total  188           clock  59.84Hz
  320x180 (0x80)  8.875MHz +HSync -VSync DoubleScan
        h: width   320 start  344 end  360 total  400 skew    0 clock  22.19KHz
        v: height  180 start  181 end  184 total  187           clock  59.32Hz
DP-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x42
	Timestamp:  16481
	Subpixel:   unknown
	Clones:     HDMI-1
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 103 
		supported: 103
	non-desktop: 0 
		range: (0, 1)
HDMI-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x43
	Timestamp:  16481
	Subpixel:   unknown
	Clones:     DP-1
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	Content Protection: Undesired 
		supported: Undesired, Desired, Enabled
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	CTM: 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 
		0 1 
	CONNECTOR_ID: 112 
		supported: 112
	non-desktop: 0 
		range: (0, 1)

Offline

#2 2023-12-15 19:31:47

loqs
Member
Registered: 2014-03-06
Posts: 18,928

Re: External monitor not detected since last update

What was in that update?  (/var/log/pacman.log)  Please provide the contents of Xorg.log and the full system journal for a boot with the issue.

Offline

#3 2023-12-15 19:45:36

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

Here are the Xorg logs

$ grep -e Log -e tty /var/log/Xorg.0.log
[    16.480] (--) Log file renamed from "/var/log/Xorg.pid-1464.log" to "/var/log/Xorg.0.log"
[    16.484] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 15 13:33:37 2023
[    16.499] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    17.759] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[    17.759] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    17.759] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    17.759] (**) Logitech USB Optical Mouse: always reports core events
[    17.768] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[    17.768] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[    17.769] (II) event5  - Logitech USB Optical Mouse: device removed
[    17.807] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.807] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.807] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    17.807] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[    17.808] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    17.808] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    17.808] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    17.817] (II) event5  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[    17.818] (II) event5  - Logitech USB Optical Mouse: device is a pointer
[    17.824] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    17.830] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event6)
[    17.830] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    17.830] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    17.830] (**) Logitech USB Keyboard: always reports core events
[    17.836] (II) event6  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    17.836] (II) event6  - Logitech USB Keyboard: device is a keyboard
[    17.837] (II) event6  - Logitech USB Keyboard: device removed
[    17.863] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    17.867] (II) event6  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    17.867] (II) event6  - Logitech USB Keyboard: device is a keyboard
[    17.870] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[    17.870] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    17.870] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    17.870] (**) Logitech USB Keyboard: always reports core events
[    17.874] (II) event7  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    17.874] (II) event7  - Logitech USB Keyboard: device is a keyboard
[    17.874] (II) event7  - Logitech USB Keyboard: device removed
[    17.900] (II) libinput: Logitech USB Keyboard: needs a virtual subdevice
[    17.900] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: MOUSE, id 12)
[    17.900] (**) Logitech USB Keyboard: (accel) selected scheme none/0
[    17.900] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[    17.900] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[    17.910] (II) event7  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    17.910] (II) event7  - Logitech USB Keyboard: device is a keyboard
[    18.213] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    18.213] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    18.213] (**) Logitech USB Keyboard: always reports core events
[    18.213] (II) libinput: Logitech USB Keyboard: is a virtual subdevice
[    18.213] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 17)
[  3106.348] (EE) event5  - Logitech USB Optical Mouse: client bug: event processing lagging behind by 82ms, your system is too slow

Here are today's logs from pacman.log

[2023-12-15T09:53:30-0500] [PACMAN] Running 'pacman -S -y --config /etc/pacman.conf --'
[2023-12-15T09:53:30-0500] [PACMAN] synchronizing package lists
[2023-12-15T09:53:42-0500] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2023-12-15T09:53:42-0500] [PACMAN] synchronizing package lists
[2023-12-15T09:53:43-0500] [PACMAN] starting full system upgrade
[2023-12-15T09:54:01-0500] [ALPM] transaction started
[2023-12-15T09:54:01-0500] [ALPM] upgraded v4l-utils (1.26.0-1 -> 1.26.1-1)
[2023-12-15T09:54:02-0500] [ALPM] upgraded calibre (7.1.0-2 -> 7.2.0-1)
[2023-12-15T09:54:03-0500] [ALPM] upgraded cmake (3.28.0-1 -> 3.28.1-1)
[2023-12-15T09:54:05-0500] [ALPM] upgraded python-pycrdt (0.7.1-1 -> 0.7.2-1)
[2023-12-15T09:54:05-0500] [ALPM] transaction completed
[2023-12-15T09:54:05-0500] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2023-12-15T09:54:06-0500] [ALPM] running '30-systemd-udev-reload.hook'...
[2023-12-15T09:54:07-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T09:54:07-0500] [ALPM] running '30-update-mime-database.hook'...
[2023-12-15T09:54:07-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T09:54:07-0500] [ALPM] running 'gtk-update-icon-cache.hook'...
[2023-12-15T09:54:07-0500] [ALPM] running 'update-desktop-database.hook'...
[2023-12-15T09:57:45-0500] [PACMAN] Running 'pacman -S -c -c --config /etc/pacman.conf --'
[2023-12-15T12:33:05-0500] [PACMAN] Running 'pacman -S ddd'
[2023-12-15T12:33:34-0500] [PACMAN] Running 'pacman -S --config /etc/pacman.conf -- extra/openmotif'
[2023-12-15T12:33:36-0500] [ALPM] transaction started
[2023-12-15T12:33:36-0500] [ALPM] installed libxp (1.0.4-2)
[2023-12-15T12:33:37-0500] [ALPM] installed openmotif (2.3.8-3)
[2023-12-15T12:33:37-0500] [ALPM] transaction completed
[2023-12-15T12:33:37-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:33:37-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:33:37-0500] [PACMAN] Running 'pacman -D -q --asdeps --config /etc/pacman.conf -- openmotif'
[2023-12-15T12:37:45-0500] [PACMAN] Running 'pacman -U --config /etc/pacman.conf -- /home/redacted/.cache/yay/ddd/ddd-3.4.0-12-x86_64.pkg.tar.zst'
[2023-12-15T12:37:50-0500] [ALPM] transaction started
[2023-12-15T12:37:50-0500] [ALPM] installed ddd (3.4.0-12)
[2023-12-15T12:37:50-0500] [ALPM] transaction completed
[2023-12-15T12:37:50-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:37:50-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:37:50-0500] [ALPM] running 'texinfo-install.hook'...
[2023-12-15T12:37:50-0500] [ALPM] running 'update-desktop-database.hook'...
[2023-12-15T12:37:51-0500] [PACMAN] Running 'pacman -D -q --asexplicit --config /etc/pacman.conf -- ddd'
[2023-12-15T12:40:56-0500] [PACMAN] Running 'pacman -S xorg-fonts-100dpi'
[2023-12-15T12:40:59-0500] [ALPM] transaction started
[2023-12-15T12:40:59-0500] [ALPM] installed xorg-fonts-alias-100dpi (1.0.5-1)
[2023-12-15T12:40:59-0500] [ALPM] installed xorg-fonts-100dpi (1.0.4-2)
[2023-12-15T12:40:59-0500] [ALPM] transaction completed
[2023-12-15T12:40:59-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:40:59-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:40:59-0500] [ALPM] running 'fontconfig.hook'...
[2023-12-15T12:41:00-0500] [ALPM] running 'fontconfig-32.hook'...
[2023-12-15T12:41:16-0500] [PACMAN] Running 'pacman -S gdb'
[2023-12-15T12:41:19-0500] [ALPM] transaction started
[2023-12-15T12:41:19-0500] [ALPM] reinstalled gdb (13.2-1)
[2023-12-15T12:41:20-0500] [ALPM] transaction completed
[2023-12-15T12:41:20-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:41:20-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:41:20-0500] [ALPM] running 'texinfo-install.hook'...
[2023-12-15T12:45:04-0500] [PACMAN] Running 'pacman -Rns xorg-fonts-100dpi'
[2023-12-15T12:45:08-0500] [ALPM] transaction started
[2023-12-15T12:45:10-0500] [ALPM] removed xorg-fonts-100dpi (1.0.4-2)
[2023-12-15T12:45:10-0500] [ALPM] removed xorg-fonts-alias-100dpi (1.0.5-1)
[2023-12-15T12:45:10-0500] [ALPM] transaction completed
[2023-12-15T12:45:10-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:45:10-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:45:10-0500] [ALPM] running 'fontconfig.hook'...
[2023-12-15T12:45:10-0500] [ALPM] running 'fontconfig-32.hook'...
[2023-12-15T12:51:36-0500] [PACKAGEKIT] synchronizing package lists
[2023-12-15T12:56:08-0500] [PACMAN] Running 'pacman -S xorg-fonts-100dpi'
[2023-12-15T12:56:30-0500] [ALPM] transaction started
[2023-12-15T12:56:30-0500] [ALPM] installed xorg-fonts-alias-100dpi (1.0.5-1)
[2023-12-15T12:56:31-0500] [ALPM] installed xorg-fonts-100dpi (1.0.4-2)
[2023-12-15T12:56:32-0500] [ALPM] transaction completed
[2023-12-15T12:56:32-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T12:56:32-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T12:56:32-0500] [ALPM] running 'fontconfig.hook'...
[2023-12-15T12:56:32-0500] [ALPM] running 'fontconfig-32.hook'...
[2023-12-15T13:03:39-0500] [PACKAGEKIT] synchronizing package lists
[2023-12-15T13:27:06-0500] [PACMAN] Running 'pacman -S moreutils'
[2023-12-15T13:27:10-0500] [ALPM] transaction started
[2023-12-15T13:27:10-0500] [ALPM] installed perl-io-tty (1.18-1)
[2023-12-15T13:27:10-0500] [ALPM] installed perl-ipc-run (20231003.0-1)
[2023-12-15T13:27:10-0500] [ALPM] installed perl-time-duration (1:1.21-1)
[2023-12-15T13:27:10-0500] [ALPM] installed moreutils (0.68-1)
[2023-12-15T13:27:10-0500] [ALPM] transaction completed
[2023-12-15T13:27:10-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T13:27:10-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T13:27:10-0500] [ALPM] running 'detect-old-perl-modules.hook'...
[2023-12-15T13:27:12-0500] [ALPM-SCRIPTLET] error: No package owns /usr/lib/perl5/5.32
[2023-12-15T13:27:13-0500] [ALPM-SCRIPTLET] WARNING: 448 file(s) in /usr/lib/perl5/5.32 are not tracked by pacman and need to be rebuilt.
[2023-12-15T13:27:13-0500] [ALPM-SCRIPTLET]  -> These were most likely installed directly by cpan or a similar tool.
[2023-12-15T13:27:13-0500] [ALPM-SCRIPTLET]     Run the following command to get a list of these files:
[2023-12-15T13:27:13-0500] [ALPM-SCRIPTLET]     LC_ALL=C find "/usr/lib/perl5/5.32" -type f -exec pacman -Qqo {} + |& sed -n 's/^error: No package owns \(.*\)$/\1/p'
[2023-12-15T13:27:13-0500] [ALPM-SCRIPTLET] error: No package owns /usr/lib/perl5/5.34
[2023-12-15T13:27:14-0500] [ALPM-SCRIPTLET] WARNING: 97 file(s) in /usr/lib/perl5/5.34 are not tracked by pacman and need to be rebuilt.
[2023-12-15T13:27:14-0500] [ALPM-SCRIPTLET]  -> These were most likely installed directly by cpan or a similar tool.
[2023-12-15T13:27:14-0500] [ALPM-SCRIPTLET]     Run the following command to get a list of these files:
[2023-12-15T13:27:14-0500] [ALPM-SCRIPTLET]     LC_ALL=C find "/usr/lib/perl5/5.34" -type f -exec pacman -Qqo {} + |& sed -n 's/^error: No package owns \(.*\)$/\1/p'
[2023-12-15T13:32:29-0500] [PACMAN] Running 'pacman -S -y --config /etc/pacman.conf --'
[2023-12-15T13:32:29-0500] [PACMAN] synchronizing package lists
[2023-12-15T13:32:45-0500] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2023-12-15T13:32:45-0500] [PACMAN] synchronizing package lists
[2023-12-15T13:32:46-0500] [PACMAN] starting full system upgrade
[2023-12-15T13:32:52-0500] [ALPM] transaction started
[2023-12-15T13:32:52-0500] [ALPM] upgraded licenses (20231011-1 -> 20231215-1)
[2023-12-15T13:32:53-0500] [ALPM] transaction completed
[2023-12-15T13:32:53-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T13:32:53-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T13:38:49-0500] [PACKAGEKIT] synchronizing package lists
[2023-12-15T13:45:13-0500] [PACMAN] Running 'pacman -Rns xorg-fonts-100dpi'
[2023-12-15T14:27:47-0500] [PACMAN] Running 'pacman -Rns ddd'
[2023-12-15T14:27:48-0500] [ALPM] running 'texinfo-remove.hook'...
[2023-12-15T14:27:49-0500] [ALPM] transaction started
[2023-12-15T14:27:50-0500] [ALPM] removed ddd (3.4.0-12)
[2023-12-15T14:27:50-0500] [ALPM] removed openmotif (2.3.8-3)
[2023-12-15T14:27:50-0500] [ALPM] removed libxp (1.0.4-2)
[2023-12-15T14:27:51-0500] [ALPM] transaction completed
[2023-12-15T14:27:51-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T14:27:51-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T14:27:51-0500] [ALPM] running 'update-desktop-database.hook'...
[2023-12-15T14:28:21-0500] [PACMAN] Running '/usr/bin/pacman -S --asdeps openmotif'
[2023-12-15T14:28:28-0500] [ALPM] transaction started
[2023-12-15T14:28:28-0500] [ALPM] installed libxp (1.0.4-2)
[2023-12-15T14:28:28-0500] [ALPM] installed openmotif (2.3.8-3)
[2023-12-15T14:28:28-0500] [ALPM] transaction completed
[2023-12-15T14:28:28-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T14:28:28-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T14:37:21-0500] [PACMAN] Running '/usr/bin/pacman -U /home/redacted/Downloads/ddd/ddd-3.4.0-12-x86_64.pkg.tar.zst'
[2023-12-15T14:37:22-0500] [ALPM] transaction started
[2023-12-15T14:37:22-0500] [ALPM] installed ddd (3.4.0-12)
[2023-12-15T14:37:23-0500] [ALPM] transaction completed
[2023-12-15T14:37:23-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T14:37:23-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T14:37:23-0500] [ALPM] running 'texinfo-install.hook'...
[2023-12-15T14:37:23-0500] [ALPM] running 'update-desktop-database.hook'...
[2023-12-15T14:37:46-0500] [PACMAN] Running 'pacman -R -n -s --config /etc/pacman.conf -- ddd'
[2023-12-15T14:37:47-0500] [ALPM] running 'texinfo-remove.hook'...
[2023-12-15T14:37:47-0500] [ALPM] transaction started
[2023-12-15T14:37:47-0500] [ALPM] removed ddd (3.4.0-12)
[2023-12-15T14:37:47-0500] [ALPM] removed openmotif (2.3.8-3)
[2023-12-15T14:37:47-0500] [ALPM] removed libxp (1.0.4-2)
[2023-12-15T14:37:48-0500] [ALPM] transaction completed
[2023-12-15T14:37:48-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T14:37:48-0500] [ALPM] running '90-packagekit-refresh.hook'...
[2023-12-15T14:37:48-0500] [ALPM] running 'update-desktop-database.hook'...
[2023-12-15T14:39:21-0500] [PACMAN] Running 'pacman -S openmotif'
[2023-12-15T14:39:22-0500] [ALPM] transaction started
[2023-12-15T14:39:22-0500] [ALPM] installed libxp (1.0.4-2)
[2023-12-15T14:39:22-0500] [ALPM] installed openmotif (2.3.8-3)
[2023-12-15T14:39:22-0500] [ALPM] transaction completed
[2023-12-15T14:39:22-0500] [ALPM] running '30-systemd-update.hook'...
[2023-12-15T14:39:22-0500] [ALPM] running '90-packagekit-refresh.hook'...

Offline

#4 2023-12-16 16:51:19

loqs
Member
Registered: 2014-03-06
Posts: 18,928

Re: External monitor not detected since last update

I can not understand how any of the upgrading of v4l-utils calibre  cmake  python-pycrdt,  the installation of perl-io-tty perl-ipc-run perl-time-duration moreutils,  the installation and removal of xorg-fonts-100dpi xorg-fonts-alias-100dpi,  the reinstallation of gdb,  the repeated installation and removal of ddd openmotif libxp would cause the external monitor to fail to be detected.  Perhaps the other outputs I requested will help.

Offline

#5 2023-12-16 19:37:59

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

grep -e Log -e tty /var/log/Xorg.0.log

The log, not some random grep thereof.
To post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2023-12-16 21:33:24

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

Here is the boot log
http://0x0.st/HYuI.txt
and here is the complete Xorg log.
http://0x0.st/HYug.txt

Offline

#7 2023-12-17 09:08:34

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

There's no trace of any HDMI output in there.

[    17.322] (II) modeset(0): Output HDMI-1 has no monitor section
[    17.332] (II) modeset(0): EDID for output HDMI-1
[    17.332] (II) modeset(0): Output HDMI-1 disconnected

1. cable
2. cable
3. plugs are part of the cable, make sure they're not bent and firmly seated
4. cable
5. 

Dec 15 15:19:23 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 15 15:19:23 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:102:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 16 13:08:41 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 16 13:08:41 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:102:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it

did you try the LTS kernel?
6. does the output work against other sources (bluray player, playstation, …)?
7. did I already mention the cable?

https://bbs.archlinux.org/viewtopic.php?id=290893 was down to a parallel windows hibernating
https://bbs.archlinux.org/viewtopic.php … 3#p2137633 but that log is slightly different as it has FB re-allocations.


Speaking of cables:

Dec 15 13:33:26 redacteddell kernel: ata1: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253100 irq 124
Dec 15 13:33:26 redacteddell kernel: ata2: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253180 irq 124
Dec 15 13:33:26 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:33:26 redacteddell kernel: ata1.00: ATA-9: KingFast, S0424A0, max UDMA/133
Dec 15 13:33:26 redacteddell kernel: ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
Dec 15 13:33:26 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:33:26 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 15 13:39:16 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x80000003 SErr 0x480100 action 0x6 frozen
Dec 15 13:39:16 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 13:39:16 redacteddell kernel: ata1: SError: { UnrecovData 10B8B Handshk }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/68:00:98:05:b2/02:00:29:00:00/40 tag 0 ncq dma 315392 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/38:08:00:48:d9/06:00:2f:00:00/40 tag 1 ncq dma 815104 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/c8:f8:e8:c3:ed/02:00:2a:00:00/40 tag 31 ncq dma 364544 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1: hard resetting link
Dec 15 13:39:16 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:39:16 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:39:16 redacteddell kernel: ata1: EH complete
Dec 15 13:44:12 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x180000 SErr 0x400100 action 0x6 frozen
Dec 15 13:44:13 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 13:44:13 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 13:44:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:44:13 redacteddell kernel: ata1.00: cmd 61/50:98:30:13:95/04:00:28:00:00/40 tag 19 ncq dma 565248 out
Dec 15 13:44:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:44:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:44:13 redacteddell kernel: ata1.00: cmd 61/68:a0:e0:c0:af/05:00:19:00:00/40 tag 20 ncq dma 708608 out
Dec 15 13:44:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:44:13 redacteddell kernel: ata1: hard resetting link
Dec 15 13:44:13 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:44:13 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:44:13 redacteddell kernel: ata1: EH complete
Dec 15 14:20:46 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x3ffc00 SErr 0x400100 action 0x6 frozen
Dec 15 14:20:46 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:20:46 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/88:50:10:d8:92/00:00:1b:00:00/40 tag 10 ncq dma 69632 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/58:58:a8:07:93/00:00:1b:00:00/40 tag 11 ncq dma 45056 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/60:60:38:a2:a9/00:00:1b:00:00/40 tag 12 ncq dma 49152 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:68:68:d6:d6/00:00:1b:00:00/40 tag 13 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:70:30:e4:d6/00:00:1b:00:00/40 tag 14 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/68:78:58:aa:a3/00:00:18:00:00/40 tag 15 ncq dma 53248 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/30:80:50:b2:62/00:00:18:00:00/40 tag 16 ncq dma 24576 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/58:88:90:b8:62/00:00:18:00:00/40 tag 17 ncq dma 45056 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/08:90:00:c8:d9/00:00:02:00:00/40 tag 18 ncq dma 4096 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/68:98:58:d3:d9/00:00:02:00:00/40 tag 19 ncq dma 53248 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/78:a0:40:17:da/00:00:02:00:00/40 tag 20 ncq dma 61440 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:a8:18:1e:da/00:00:02:00:00/40 tag 21 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1: hard resetting link
Dec 15 14:20:46 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:20:46 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:20:46 redacteddell kernel: ata1: EH complete
Dec 15 14:24:18 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x7f000 SErr 0x400100 action 0x6 frozen
Dec 15 14:24:18 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:24:18 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/18:60:98:54:24/04:00:26:00:00/40 tag 12 ncq dma 536576 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/f8:68:18:59:24/01:00:26:00:00/40 tag 13 ncq dma 258048 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/c0:70:28:79:24/01:00:26:00:00/40 tag 14 ncq dma 229376 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/40:78:90:80:24/05:00:26:00:00/40 tag 15 ncq dma 688128 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/d8:80:58:55:62/01:00:1f:00:00/40 tag 16 ncq dma 241664 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/60:88:a8:75:62/02:00:1f:00:00/40 tag 17 ncq dma 311296 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/e0:90:58:15:6e/01:00:1f:00:00/40 tag 18 ncq dma 245760 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1: hard resetting link
Dec 15 14:24:18 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:24:18 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:24:18 redacteddell kernel: ata1: EH complete
Dec 15 14:26:13 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x1000 SErr 0x400100 action 0x6 frozen
Dec 15 14:26:13 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:26:13 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:26:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:26:13 redacteddell kernel: ata1.00: cmd 61/80:60:e0:81:14/00:00:24:00:00/40 tag 12 ncq dma 65536 out
Dec 15 14:26:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:26:13 redacteddell kernel: ata1: hard resetting link
Dec 15 14:26:13 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:26:14 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:26:14 redacteddell kernel: ata1: EH complete
Dec 15 15:19:23 redacteddell kernel: ata1.00: Entering standby power mode
Dec 15 15:19:23 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 15 15:19:23 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:19:23 redacteddell kernel: ata1.00: Entering active power mode
Dec 15 15:19:23 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:09 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x7e00 SErr 0x400100 action 0x6 frozen
Dec 15 15:21:09 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:09 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/48:48:88:bd:75/00:00:2b:00:00/40 tag 9 ncq dma 36864 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:50:08:be:75/00:00:2b:00:00/40 tag 10 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/38:58:d8:bf:75/00:00:2b:00:00/40 tag 11 ncq dma 28672 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:60:68:c0:75/00:00:2b:00:00/40 tag 12 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:68:30:c1:75/00:00:2b:00:00/40 tag 13 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/40:70:00:c2:75/00:00:2b:00:00/40 tag 14 ncq dma 32768 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:09 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:09 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:09 redacteddell kernel: ata1: EH complete
Dec 15 15:21:12 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x80000000 SErr 0x400100 action 0x6 frozen
Dec 15 15:21:12 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:12 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:21:12 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:12 redacteddell kernel: ata1.00: cmd 61/b0:f8:a8:4a:1a/00:00:0c:00:00/40 tag 31 ncq dma 90112 out
Dec 15 15:21:12 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:12 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:12 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:12 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:12 redacteddell kernel: ata1: EH complete
Dec 15 15:21:42 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x8 SErr 0x280100 action 0x6 frozen
Dec 15 15:21:42 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:42 redacteddell kernel: ata1: SError: { UnrecovData 10B8B BadCRC }
Dec 15 15:21:42 redacteddell kernel: ata1.00: failed command: READ FPDMA QUEUED
Dec 15 15:21:42 redacteddell kernel: ata1.00: cmd 60/00:18:38:d4:87/01:00:0e:00:00/40 tag 3 ncq dma 131072 in
Dec 15 15:21:42 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:42 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:42 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:42 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:42 redacteddell kernel: ata1: EH complete
Dec 15 15:25:18 redacteddell kernel: ata1: limiting SATA link speed to 3.0 Gbps
Dec 15 15:25:18 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0xf800 SErr 0x400100 action 0x6 frozen
Dec 15 15:25:18 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:25:18 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/f0:58:70:d8:db/04:00:02:00:00/40 tag 11 ncq dma 647168 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:60:70:f8:d8/05:00:02:00:00/40 tag 12 ncq dma 688128 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/e8:68:b0:fd:d8/00:00:02:00:00/40 tag 13 ncq dma 118784 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:70:80:28:d9/05:00:02:00:00/40 tag 14 ncq dma 688128 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:78:c0:2d:d9/00:00:02:00:00/40 tag 15 ncq dma 32768 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1: hard resetting link
Dec 15 15:25:19 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 15 15:25:19 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:25:19 redacteddell kernel: ata1: EH complete
Dec 16 13:08:41 redacteddell kernel: ata1.00: Entering standby power mode
Dec 16 13:08:41 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 16 13:08:41 redacteddell kernel: ata1.00: Entering active power mode
Dec 16 13:08:41 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 13:08:41 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 16 13:52:32 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 16:18:31 redacteddell kernel: ata1.00: Entering standby power mode
Dec 16 16:18:32 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 16:18:32 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 16 16:18:32 redacteddell kernel: ata1.00: Entering active power mode
Dec 16 16:18:32 redacteddell kernel: ata1.00: configured for UDMA/133

Unrelated, but you probably want to look into that as well.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2023-12-17 19:31:08

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

I tried connecting the monitor using the same HDMI cable to a Raspberry Pi and it works. Could the problem be with my laptop's HDMI port?

seth wrote:

There's no trace of any HDMI output in there.

[    17.322] (II) modeset(0): Output HDMI-1 has no monitor section
[    17.332] (II) modeset(0): EDID for output HDMI-1
[    17.332] (II) modeset(0): Output HDMI-1 disconnected

1. cable
2. cable
3. plugs are part of the cable, make sure they're not bent and firmly seated
4. cable
5. 

Dec 15 15:19:23 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 15 15:19:23 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:102:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 16 13:08:41 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
Dec 16 13:08:41 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:102:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it

did you try the LTS kernel?
6. does the output work against other sources (bluray player, playstation, …)?
7. did I already mention the cable?

https://bbs.archlinux.org/viewtopic.php?id=290893 was down to a parallel windows hibernating
https://bbs.archlinux.org/viewtopic.php … 3#p2137633 but that log is slightly different as it has FB re-allocations.


Speaking of cables:

Dec 15 13:33:26 redacteddell kernel: ata1: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253100 irq 124
Dec 15 13:33:26 redacteddell kernel: ata2: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253180 irq 124
Dec 15 13:33:26 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:33:26 redacteddell kernel: ata1.00: ATA-9: KingFast, S0424A0, max UDMA/133
Dec 15 13:33:26 redacteddell kernel: ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
Dec 15 13:33:26 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:33:26 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 15 13:39:16 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x80000003 SErr 0x480100 action 0x6 frozen
Dec 15 13:39:16 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 13:39:16 redacteddell kernel: ata1: SError: { UnrecovData 10B8B Handshk }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/68:00:98:05:b2/02:00:29:00:00/40 tag 0 ncq dma 315392 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/38:08:00:48:d9/06:00:2f:00:00/40 tag 1 ncq dma 815104 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:39:16 redacteddell kernel: ata1.00: cmd 61/c8:f8:e8:c3:ed/02:00:2a:00:00/40 tag 31 ncq dma 364544 out
Dec 15 13:39:16 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:39:16 redacteddell kernel: ata1: hard resetting link
Dec 15 13:39:16 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:39:16 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:39:16 redacteddell kernel: ata1: EH complete
Dec 15 13:44:12 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x180000 SErr 0x400100 action 0x6 frozen
Dec 15 13:44:13 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 13:44:13 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 13:44:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:44:13 redacteddell kernel: ata1.00: cmd 61/50:98:30:13:95/04:00:28:00:00/40 tag 19 ncq dma 565248 out
Dec 15 13:44:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:44:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 13:44:13 redacteddell kernel: ata1.00: cmd 61/68:a0:e0:c0:af/05:00:19:00:00/40 tag 20 ncq dma 708608 out
Dec 15 13:44:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 13:44:13 redacteddell kernel: ata1: hard resetting link
Dec 15 13:44:13 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 13:44:13 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 13:44:13 redacteddell kernel: ata1: EH complete
Dec 15 14:20:46 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x3ffc00 SErr 0x400100 action 0x6 frozen
Dec 15 14:20:46 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:20:46 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/88:50:10:d8:92/00:00:1b:00:00/40 tag 10 ncq dma 69632 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/58:58:a8:07:93/00:00:1b:00:00/40 tag 11 ncq dma 45056 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/60:60:38:a2:a9/00:00:1b:00:00/40 tag 12 ncq dma 49152 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:68:68:d6:d6/00:00:1b:00:00/40 tag 13 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:70:30:e4:d6/00:00:1b:00:00/40 tag 14 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/68:78:58:aa:a3/00:00:18:00:00/40 tag 15 ncq dma 53248 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/30:80:50:b2:62/00:00:18:00:00/40 tag 16 ncq dma 24576 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/58:88:90:b8:62/00:00:18:00:00/40 tag 17 ncq dma 45056 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/08:90:00:c8:d9/00:00:02:00:00/40 tag 18 ncq dma 4096 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/68:98:58:d3:d9/00:00:02:00:00/40 tag 19 ncq dma 53248 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/78:a0:40:17:da/00:00:02:00:00/40 tag 20 ncq dma 61440 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:20:46 redacteddell kernel: ata1.00: cmd 61/28:a8:18:1e:da/00:00:02:00:00/40 tag 21 ncq dma 20480 out
Dec 15 14:20:46 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:20:46 redacteddell kernel: ata1: hard resetting link
Dec 15 14:20:46 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:20:46 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:20:46 redacteddell kernel: ata1: EH complete
Dec 15 14:24:18 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x7f000 SErr 0x400100 action 0x6 frozen
Dec 15 14:24:18 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:24:18 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/18:60:98:54:24/04:00:26:00:00/40 tag 12 ncq dma 536576 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/f8:68:18:59:24/01:00:26:00:00/40 tag 13 ncq dma 258048 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/c0:70:28:79:24/01:00:26:00:00/40 tag 14 ncq dma 229376 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/40:78:90:80:24/05:00:26:00:00/40 tag 15 ncq dma 688128 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/d8:80:58:55:62/01:00:1f:00:00/40 tag 16 ncq dma 241664 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/60:88:a8:75:62/02:00:1f:00:00/40 tag 17 ncq dma 311296 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:24:18 redacteddell kernel: ata1.00: cmd 61/e0:90:58:15:6e/01:00:1f:00:00/40 tag 18 ncq dma 245760 out
Dec 15 14:24:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:24:18 redacteddell kernel: ata1: hard resetting link
Dec 15 14:24:18 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:24:18 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:24:18 redacteddell kernel: ata1: EH complete
Dec 15 14:26:13 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x1000 SErr 0x400100 action 0x6 frozen
Dec 15 14:26:13 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 14:26:13 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 14:26:13 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 14:26:13 redacteddell kernel: ata1.00: cmd 61/80:60:e0:81:14/00:00:24:00:00/40 tag 12 ncq dma 65536 out
Dec 15 14:26:13 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 14:26:13 redacteddell kernel: ata1: hard resetting link
Dec 15 14:26:13 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 14:26:14 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 14:26:14 redacteddell kernel: ata1: EH complete
Dec 15 15:19:23 redacteddell kernel: ata1.00: Entering standby power mode
Dec 15 15:19:23 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 15 15:19:23 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:19:23 redacteddell kernel: ata1.00: Entering active power mode
Dec 15 15:19:23 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:09 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x7e00 SErr 0x400100 action 0x6 frozen
Dec 15 15:21:09 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:09 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/48:48:88:bd:75/00:00:2b:00:00/40 tag 9 ncq dma 36864 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:50:08:be:75/00:00:2b:00:00/40 tag 10 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/38:58:d8:bf:75/00:00:2b:00:00/40 tag 11 ncq dma 28672 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:60:68:c0:75/00:00:2b:00:00/40 tag 12 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/08:68:30:c1:75/00:00:2b:00:00/40 tag 13 ncq dma 4096 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:09 redacteddell kernel: ata1.00: cmd 61/40:70:00:c2:75/00:00:2b:00:00/40 tag 14 ncq dma 32768 out
Dec 15 15:21:09 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:09 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:09 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:09 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:09 redacteddell kernel: ata1: EH complete
Dec 15 15:21:12 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x80000000 SErr 0x400100 action 0x6 frozen
Dec 15 15:21:12 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:12 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:21:12 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:21:12 redacteddell kernel: ata1.00: cmd 61/b0:f8:a8:4a:1a/00:00:0c:00:00/40 tag 31 ncq dma 90112 out
Dec 15 15:21:12 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:12 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:12 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:12 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:12 redacteddell kernel: ata1: EH complete
Dec 15 15:21:42 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0x8 SErr 0x280100 action 0x6 frozen
Dec 15 15:21:42 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:21:42 redacteddell kernel: ata1: SError: { UnrecovData 10B8B BadCRC }
Dec 15 15:21:42 redacteddell kernel: ata1.00: failed command: READ FPDMA QUEUED
Dec 15 15:21:42 redacteddell kernel: ata1.00: cmd 60/00:18:38:d4:87/01:00:0e:00:00/40 tag 3 ncq dma 131072 in
Dec 15 15:21:42 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:21:42 redacteddell kernel: ata1: hard resetting link
Dec 15 15:21:42 redacteddell kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 15 15:21:42 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:21:42 redacteddell kernel: ata1: EH complete
Dec 15 15:25:18 redacteddell kernel: ata1: limiting SATA link speed to 3.0 Gbps
Dec 15 15:25:18 redacteddell kernel: ata1.00: exception Emask 0x10 SAct 0xf800 SErr 0x400100 action 0x6 frozen
Dec 15 15:25:18 redacteddell kernel: ata1.00: irq_stat 0x08000000, interface fatal error
Dec 15 15:25:18 redacteddell kernel: ata1: SError: { UnrecovData Handshk }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/f0:58:70:d8:db/04:00:02:00:00/40 tag 11 ncq dma 647168 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:60:70:f8:d8/05:00:02:00:00/40 tag 12 ncq dma 688128 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/e8:68:b0:fd:d8/00:00:02:00:00/40 tag 13 ncq dma 118784 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:70:80:28:d9/05:00:02:00:00/40 tag 14 ncq dma 688128 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1.00: failed command: WRITE FPDMA QUEUED
Dec 15 15:25:18 redacteddell kernel: ata1.00: cmd 61/40:78:c0:2d:d9/00:00:02:00:00/40 tag 15 ncq dma 32768 out
Dec 15 15:25:18 redacteddell kernel: ata1.00: status: { DRDY }
Dec 15 15:25:18 redacteddell kernel: ata1: hard resetting link
Dec 15 15:25:19 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 15 15:25:19 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 15 15:25:19 redacteddell kernel: ata1: EH complete
Dec 16 13:08:41 redacteddell kernel: ata1.00: Entering standby power mode
Dec 16 13:08:41 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 16 13:08:41 redacteddell kernel: ata1.00: Entering active power mode
Dec 16 13:08:41 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 13:08:41 redacteddell kernel: ata1.00: configured for UDMA/133
Dec 16 13:52:32 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 16:18:31 redacteddell kernel: ata1.00: Entering standby power mode
Dec 16 16:18:32 redacteddell kernel: ata2: SATA link down (SStatus 0 SControl 300)
Dec 16 16:18:32 redacteddell kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Dec 16 16:18:32 redacteddell kernel: ata1.00: Entering active power mode
Dec 16 16:18:32 redacteddell kernel: ata1.00: configured for UDMA/133

Unrelated, but you probably want to look into that as well.

Offline

#9 2023-12-17 20:10:45

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

Please don't fully quote posts, you'r ejust bloating the thread.
Did you try the LTS kernel?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2023-12-17 20:27:14

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

I did a system upgrade using yay today and also installed the linux-lts, but *did not* make any changes to grub to boot the LTS kernel. On rebooting with the regular kernel, the problem went away. The pacman logs from today are at http://0x0.st/HY9W.txt. I've had this issue in the past as well when it went away after doing similar updates. https://bbs.archlinux.org/viewtopic.php?id=289300
Also, here are the boot logs for the last boot
http://0x0.st/HY9Y.txt
Here are the Xorg logs
http://0x0.st/HY9E.txt

Last edited by bisarch (2023-12-17 20:43:04)

Offline

#11 2023-12-17 20:42:47

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

It might just be a warm reboot? Or coincidence… I see nothing in the latest update that could have even remotely impacted that in theory.

Do you have the journal of the "good" boot?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2023-12-17 20:43:47

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

Added the boot and Xorg logs to my last message.

Offline

#13 2023-12-17 20:47:03

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

Dec 17 15:17:15 redacteddell kernel: i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it

So that's probably a red herring.

Ftr, you also

tried connecting the monitor using the same HDMI cable to a Raspberry Pi and it works.

Ie. you re-plugged the cable between good and bad boot?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#14 2023-12-17 20:49:07

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

Yes, I re-plugged the cable between good and bad boot.

Offline

#15 2023-12-17 20:50:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

Do you have other HDMI cables?
Any chance it could get loose in the slot where it ("randomly") fails?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#16 2023-12-17 20:52:48

bisarch
Member
Registered: 2020-04-07
Posts: 60

Re: External monitor not detected since last update

I don't think so, because the problem has been consistent across two different HDMI cables.

Offline

#17 2023-12-17 21:12:44

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,048

Re: External monitor not detected since last update

The slot might be/get loose?
Next time this happens test
1. the behavior of the the LTS kernel BEFORE
2. re-plugging the cable (on both ends)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB