[SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

ky246 · 2024-02-29 00:07:39

After upgrading arch, my keyboard stopped working, and is no longer recognized by the system. Using an external USB keyboard still works fine.
The keyboard still works in the grub menu, but stops working after booting into Arch. My touch-pad still works without any problems.

The hardware that I'm using is a DELL Chromebook 3189.

After undoing updates and reinstalling them one by one, I found that the problem only started after updating the linux kernel.
Further, linux 6.7.5arch1-1 works fine, but 6.7.6 doesn't.

Thank you,
Ky

Last edited by ky246 (2024-03-01 15:43:03)

seth · 2024-02-29 08:34:02

Please post your complete system journal for a boot w/ both kernels, eg.

sudo journalctl -b | curl -F 'file=@-' 0x0.st

for the current one and

sudo journalctl -b -3 | curl -F 'file=@-' 0x0.st

for 3 boots ago.

When the keyboard doesn'twork™, does that include kernel shortcuts like ctrl+alt+F1/2/3/… or https://wiki.archlinux.org/title/Keyboa … el_(SysRq)
Is the disfunction limited to the GUI or also the multi-user.target (2nd link below)?

ky246 · 2024-02-29 11:41:26

Logs for when running 6.7.5:
https://0x0.st/HRxc.txt

Logs for 6.7.6:
https://0x0.st/HRxT.txt

When the keyboard doesn't work, system shortcuts also don't work.
Keyboard doesn't work in multi-user.target nor the GUI.

seth · 2024-02-29 15:26:15

Feb 28 17:24:38 archpc kernel: sdhci: Secure Digital Host Controller Interface driver
Feb 28 17:24:38 archpc kernel: sdhci: Copyright(c) Pierre Ossman
Feb 28 17:24:38 archpc kernel: sdhci-pci 0000:00:10.0: SDHCI controller found [8086:2294] (rev 35)
Feb 28 17:24:38 archpc kernel: sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 35)
Feb 28 17:24:38 archpc kernel: ACPI: \: failed to evaluate _DSM a53ec1f6-cd65-1f46-ab7a-29f7e8d5bd61 (0x1001)
Feb 28 17:24:38 archpc kernel: sdhci-pci 0000:00:12.0: failed to setup card detect gpio
Feb 28 17:24:38 archpc kernel: mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
Feb 28 17:24:38 archpc kernel: mmc0: SDHCI controller on PCI [0000:00:10.0] using ADMA
Feb 28 17:24:38 archpc kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq -51
Feb 28 17:24:38 archpc kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Feb 28 17:24:38 archpc kernel: i8042: Warning: Keylock active
Feb 28 17:24:38 archpc kernel: i8042: probe of i8042 failed with error -22

This smells like https://bbs.archlinux.org/viewtopic.php?id=293227
loqs linked a patched kernel there you might want to try.
Alternatively try to add i8042 to the initramfs…

x-ref: https://bbs.archlinux.org/viewtopic.php?id=293287

ky246 · 2024-02-29 16:15:36

I'm still having the problems after installing the patched kernel.

Here are the new logs:
https://0x0.st/HRgc.txt

I'm not entirely confident I installed the kernel the right way, so I'll just paste the command I used here:

sudo pacman -U --noconfirm linux-6.7.6.arch1-1.1-x86_64.pkg.tar.zst linux-headers-6.7.6.arch1-1.1-x86_64.pkg.tar.zst

seth · 2024-02-29 16:49:02

Feb 29 08:05:26 archpc kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq -51
Feb 29 08:05:26 archpc kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Feb 29 08:05:26 archpc kernel: i8042: Warning: Keylock active
Feb 29 08:05:26 archpc kernel: i8042: probe of i8042 failed with error -22

No change, do you have more luck loading the i8042 early?
We'll probably have to bisect those, but w/ the other thread hinging on the mmc and your keyboard showing up around that and

Feb 29 08:05:26 archpc kernel: sdhci-pci 0000:00:12.0: failed to setup card detect gpio

it's probably the same regression.

Edit: though there's also

commit 609c7c1cc976e740d0fed4dbeec688b3ecb5dce2
Author: Jean Delvare
Date:   Wed Feb 14 15:59:39 2024 +0100

    i2c: i801: Fix block process call transactions
    
    [ Upstream commit c1c9d0f6f7f1dbf29db996bd8e166242843a5f21 ]
    
    According to the Intel datasheets, software must reset the block
    buffer index twice for block process call transactions: once before
    writing the outgoing data to the buffer, and once again before
    reading the incoming data from the buffer.
    
    The driver is currently missing the second reset, causing the wrong
    portion of the block buffer to be read.

Last edited by seth (2024-02-29 17:10:03)

loqs · 2024-02-29 17:21:34

$ git bisect start
status: waiting for both good and bad commits
$ git bisect bad v6.7.6
status: waiting for good commit(s), bad commit known
$ git bisect good v6.7.5
Bisecting: 156 revisions left to test after this (roughly 7 steps)
[00c48bfbd6b29b8ebf64edd059dbf9e95cedd5b1] misc: fastrpc: Mark all sessions as invalid in cb_remove

Folder containing Linux bisection 6.7.5 to 6.7.6 first bisection point.

ky246 · 2024-02-29 18:06:54

Will I be able to load i8042 early simply by adding

MODULES=(i8042)

to /etc/mkinitcpio.conf and remaking initramfs?

I have taken these steps and am still getting the same issue.

@loqs
I'm getting the error in that bisection.

loqs · 2024-02-29 18:59:06

$ git bisect bad
Bisecting: 78 revisions left to test after this (roughly 6 steps)
[5d08c617e59ab4dfbfa97a65dae2bad144fa7a6f] ALSA: hda/realtek: Fix the external mic not being recognised for Acer Swift 1 SF114-32

New build 6.7.5.r78.g5d08c617e59a is now in the linked folder.

ky246 · 2024-02-29 19:09:48

That bisection also contains the error

loqs · 2024-02-29 19:47:04

$ git bisect bad
Bisecting: 38 revisions left to test after this (roughly 5 steps)
[2fde17d0c227a1504c2553b0879d81ce0141de9c] selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace

New build 6.7.5.r39.g2fde17d0c227 s now in the linked folder.

ky246 · 2024-02-29 19:57:58

It's not appearing in the folder for me.

loqs · 2024-02-29 20:34:17

ky246 wrote:

It's not appearing in the folder for me.

Upload failed. It should be there now.

ky246 · 2024-02-29 20:44:31

That section also contains the error.

loqs · 2024-02-29 22:35:21

$ git bisect bad
Bisecting: 19 revisions left to test after this (roughly 4 steps)
[d7e771d85ad1818e94ae80f320cf6cbad3365223] selftests/landlock: Fix fs_test build with old libc

New build 6.7.5.r19.gd7e771d85ad1 is now in the linked folder.

ky246 · 2024-02-29 22:45:10

Also still has the error

loqs · 2024-03-01 04:57:14

$ git bisect bad
Bisecting: 9 revisions left to test after this (roughly 3 steps)
[1429a6d1312877b54768edba19e33b1dfa5277d9] btrfs: forbid creating subvol qgroups

New build 6.7.5.r9.g1429a6d13128 is now in the linked folder.

@seth https://git.kernel.org/pub/scm/linux/ke … 7bd90c626d ?

ky246 · 2024-03-01 05:20:38

Has error

loqs · 2024-03-01 05:44:11

Please try linux 6.7.6.arch1-2 see https://gitlab.archlinux.org/archlinux/ … 5b8fecfc3e

zzzardoz · 2024-03-01 08:00:48

Thanks @loqs! I had the same issue with my Acer Chromebook 14 CB3-431 (Edgar). 6.7.6.arch1-2 solved it. :-)

ky246 · 2024-03-01 15:42:41

Thank you! That update fixed the problem.
Marking this thread as solved.

Arch Linux

#1 2024-02-29 00:07:39

[SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#2 2024-02-29 08:34:02

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#3 2024-02-29 11:41:26

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#4 2024-02-29 15:26:15

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#5 2024-02-29 16:15:36

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#6 2024-02-29 16:49:02

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#7 2024-02-29 17:21:34

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#8 2024-02-29 18:06:54

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#9 2024-02-29 18:59:06

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#10 2024-02-29 19:09:48

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#11 2024-02-29 19:47:04

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#12 2024-02-29 19:57:58

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#13 2024-02-29 20:34:17

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#14 2024-02-29 20:44:31

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#15 2024-02-29 22:35:21

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#16 2024-02-29 22:45:10

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#17 2024-03-01 04:57:14

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#18 2024-03-01 05:20:38

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#19 2024-03-01 05:44:11

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#20 2024-03-01 08:00:48

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

#21 2024-03-01 15:42:41

Re: [SOLVED] Keyboard stopped working after updating to linux 6.7.6arch1-1

Board footer