You are not logged in.

#1 2024-03-27 19:38:48

Broskev
Member
Registered: 2016-04-05
Posts: 26

Upgrading arch broken my mic on Lenovo P14s G4 AMD

Hello,
yesterday I did weekly upgrade of arch and after that my microphone stopped working. Usually only source ID is changed so I have to change keybindings and everything around it, but this time it's much worse.
I am using pipewire and pipewire-pulse. I downgraded everything around pipewire, but the problem persists.
Monitor is default source and my real source is suspended.
When I resume my real source or try to set it as default then nothing happens.
Also when I usually choose which source to use for example in browser it doesn't allow me anything to select.
What can be wrong?

Thanks for help guys!

Pactl sources output:

Source #55
    State: RUNNING
    Name: alsa_output.pci-0000_64_00.6.analog-stereo.monitor
    Description: Monitor of Family 17h/19h HD Audio Controller Analogové stereo
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: yes
    Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
            balance 0,00
    Base Volume: 65536 / 100% / 0,00 dB
    Monitor of Sink: alsa_output.pci-0000_64_00.6.analog-stereo
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY
    Properties:
        alsa.card = "1"
        alsa.card_name = "HD-Audio Generic"
        alsa.class = "generic"
        alsa.device = "0"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "ALC257 Analog"
        alsa.long_card_name = "HD-Audio Generic at 0x785c0000 irq 97"
        alsa.name = "ALC257 Analog"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        api.alsa.card.longname = "HD-Audio Generic at 0x785c0000 irq 97"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.path = "front:1"
        api.alsa.pcm.card = "1"
        api.alsa.pcm.stream = "playback"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "3"
        device.api = "alsa"
        device.class = "monitor"
        device.id = "50"
        device.profile.description = "Analogové stereo"
        device.profile.name = "analog-stereo"
        device.routes = "2"
        factory.name = "api.alsa.pcm.sink"
        media.class = "Audio/Sink"
        device.description = "Family 17h/19h HD Audio Controller"
        node.name = "alsa_output.pci-0000_64_00.6.analog-stereo"
        node.nick = "ALC257 Analog"
        node.pause-on-idle = "false"
        object.path = "alsa:pcm:1:front:1:playback"
        priority.driver = "1009"
        priority.session = "1009"
        factory.id = "18"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        factory.mode = "merge"
        audio.adapt.follower = ""
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "55"
        object.serial = "55"
        node.max-latency = "16384/48000"
        api.alsa.period-size = "1024"
        api.alsa.period-num = "32"
        api.alsa.headroom = "0"
        api.acp.auto-port = "false"
        api.alsa.card = "1"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio1"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:64:00.6"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_64_00.6"
        device.nick = "HD-Audio Generic"
        device.plugged.usec = "11952024"
        device.product.id = "0x15e3"
        device.product.name = "Family 17h/19h HD Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:64:00.6/sound/card1"
        device.vendor.id = "0x1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        device.string = "1"
    Ports:
        analog-output-speaker: Reproduktory (type: Speaker, priority: 10000, availability group: Legacy 2, availability unknown)
        analog-output-headphones: Sluchátka (type: Headphones, priority: 9900, availability group: Legacy 3, not available)
    Active Port: analog-output-speaker
    Formats:
        pcm

Source #56
    State: SUSPENDED
    Name: alsa_input.pci-0000_64_00.6.analog-stereo
    Description: Family 17h/19h HD Audio Controller Analogové stereo
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: no
    Volume: front-left: 53084 /  81% / -5,49 dB,   front-right: 53084 /  81% / -5,49 dB
            balance 0,00
    Base Volume: 65536 / 100% / 0,00 dB
    Monitor of Sink: n/a
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY
    Properties:
        alsa.card = "1"
        alsa.card_name = "HD-Audio Generic"
        alsa.class = "generic"
        alsa.device = "0"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "ALC257 Analog"
        alsa.long_card_name = "HD-Audio Generic at 0x785c0000 irq 97"
        alsa.name = "ALC257 Analog"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        api.alsa.card.longname = "HD-Audio Generic at 0x785c0000 irq 97"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.path = "front:1"
        api.alsa.pcm.card = "1"
        api.alsa.pcm.stream = "capture"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "0"
        device.api = "alsa"
        device.class = "sound"
        device.id = "50"
        device.profile.description = "Analogové stereo"
        device.profile.name = "analog-stereo"
        device.routes = "1"
        factory.name = "api.alsa.pcm.source"
        media.class = "Audio/Source"
        device.description = "Family 17h/19h HD Audio Controller"
        node.name = "alsa_input.pci-0000_64_00.6.analog-stereo"
        node.nick = "ALC257 Analog"
        node.pause-on-idle = "false"
        object.path = "alsa:pcm:1:front:1:capture"
        priority.driver = "2009"
        priority.session = "2009"
        factory.id = "18"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        factory.mode = "split"
        audio.adapt.follower = ""
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "56"
        object.serial = "56"
        api.acp.auto-port = "false"
        api.alsa.card = "1"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio1"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:64:00.6"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_64_00.6"
        device.nick = "HD-Audio Generic"
        device.plugged.usec = "11952024"
        device.product.id = "0x15e3"
        device.product.name = "Family 17h/19h HD Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:64:00.6/sound/card1"
        device.vendor.id = "0x1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        device.string = "1"
    Ports:
        analog-input-mic: Mikrofon (type: Mic, priority: 8700, availability group: Legacy 1, not available)
    Active Port: analog-input-mic
    Formats:
        pcm

Offline

#2 2024-03-28 05:31:31

SinoCiCi
Member
Registered: 2024-03-28
Posts: 6

Re: Upgrading arch broken my mic on Lenovo P14s G4 AMD

hello, check https://bbs.archlinux.org/viewtopic.php?id=294307 and see if it solves the problem

Offline

#3 2024-04-02 07:39:07

Broskev
Member
Registered: 2016-04-05
Posts: 26

Re: Upgrading arch broken my mic on Lenovo P14s G4 AMD

Thanks dude! Either this or another update fixed it.

Offline

Board footer

Powered by FluxBB