You are not logged in.

Pages: 1

#1 2024-05-27 23:36:19

EBR
Member
Registered: 2022-06-09
Posts: 19

sd reader does not work

I am tring to a sd reader through usb but kde plasma just give me a connection sound and does nothing.

here is  

sudo dmesg -w

  output

[   59.124279] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[   59.250665] usb 1-2: New USB device found, idVendor=aaaa, idProduct=8816, bcdDevice=13.08
[   59.250685] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   59.250694] usb 1-2: Product: MXT USB Device
[   59.250731] usb 1-2: Manufacturer: MXTronics
[   59.250737] usb 1-2: SerialNumber: 150101v01
[   59.253760] usb-storage 1-2:1.0: USB Mass Storage device detected
[   59.254710] scsi host2: usb-storage 1-2:1.0
[   60.259375] scsi 2:0:0:0: Direct-Access     MXT-USB  Storage Device   1501 PQ: 0 ANSI: 0 CCS
[   60.262355] sd 2:0:0:0: [sda] 499744768 512-byte logical blocks: (256 GB/238 GiB)
[   60.262613] sd 2:0:0:0: [sda] Write Protect is off
[   60.262665] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[   60.262830] sd 2:0:0:0: [sda] No Caching mode page found
[   60.262838] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   60.266465]  sda: sda1
[   60.266826] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   75.802572] usb 1-2: reset high-speed USB device number 6 using xhci_hcd
[   91.159054] usb 1-2: reset high-speed USB device number 6 using xhci_hcd

what should i do to fix this?

Last edited by EBR (2024-05-28 11:19:28)

Offline

#2 2024-05-28 06:34:13

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

https://bbs.archlinux.org/viewtopic.php … 1#p2173651 - try the LTS kernel.

Also please use [code][/code] tags. Edit your post in this regard.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#3 2024-05-28 11:18:56

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

I tried it the same thing happened.

Offline

#4 2024-05-28 13:56:53

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

Is that the entire output?
The resets are suspiciously frequent at ~15s.

What do you get for "lsblk -f" after attaching the device?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#5 2024-05-28 14:06:55

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

NAME        FSTYPE FSVER LABEL UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda
└─sda1
zram0                                                                              [SWAP]
nvme0n1
├─nvme0n1p1 vfat   FAT32       2779-3E94                               1.5G    23% /boot
└─nvme0n1p2 btrfs              bc6b055b-31d8-4f2e-9561-dd3667ec5bec  223.9G     5% /var/tmp
                                                                                   /var/log
                                                                                   /var/cache
                                                                                   /srv
                                                                                   /root
                                                                                   /home
                                                                                   /

Last edited by EBR (2024-05-28 14:09:29)

Offline

#6 2024-05-28 15:01:46

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

Well, sda1 shows up. What if you just mount it?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#7 2024-05-28 15:06:16

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

does nothing with no output.

Offline

#8 2024-05-28 15:12:03

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
You'll either mount the drive or you'll get an error that it didn't work (and why) - "does nothing with no output" isn't an option here and "no output" from "mount …" generally means it just worked.
=> updated lsblk?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#9 2024-05-28 15:15:38

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

 
sudo mount /dev/sda1 /SD

[sudo] password for User:
_
and It stuck like this.

Offline

#10 2024-05-28 15:17:05

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

just gave me this output:
mount: /SD: can't read superblock on /dev/sda1.
       dmesg(1) may have more information after failed mount system call.

Offline

#11 2024-05-28 15:18:03

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

and lsblk didn't change.

Offline

#12 2024-05-28 15:20:30

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

Please don't bump - edit your previous post if nobody has yet replied.

Then check your dmesg tail.
"stuck" means there were likely some IO errors.

Have you tried to attach the reader to a different usb port?
Does the SD card work in a different system?
Does the SD card work in this card reader, but attached to a different system?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#13 2024-05-28 15:22:31

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

yes
yes
yes
but what do you by "but attached to a different system?"?

Offline

#14 2024-05-28 15:30:10

EBR
Member
Registered: 2022-06-09
Posts: 19

Re: sd reader does not work

dmesg:

[  952.759916] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=3s
[  952.759932] sd 2:0:0:0: [sda] tag#0 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 1316.079079] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[ 1316.205518] usb 1-1: New USB device found, idVendor=aaaa, idProduct=8816, bcdDevice=13.08
[ 1316.205536] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1316.205544] usb 1-1: Product: MXT USB Device
[ 1316.205549] usb 1-1: Manufacturer: MXTronics
[ 1316.205553] usb 1-1: SerialNumber: 150101v01
[ 1316.208065] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1316.209021] scsi host2: usb-storage 1-1:1.0
[ 1317.237747] scsi 2:0:0:0: Direct-Access     MXT-USB  Storage Device   1501 PQ: 0 ANSI: 0 CCS
[ 1317.241270] sd 2:0:0:0: [sda] 499744768 512-byte logical blocks: (256 GB/238 GiB)
[ 1317.241418] sd 2:0:0:0: [sda] Write Protect is off
[ 1317.241426] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1317.241563] sd 2:0:0:0: [sda] No Caching mode page found
[ 1317.241569] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 1317.245488]  sda: sda1
[ 1317.246241] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 1332.533726] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1347.895122] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1363.261236] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1378.619569] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1378.753255]  sda: sda1
[ 1378.960386] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1394.493969] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1409.848321] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1409.977281] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1409.977298] I/O error, dev sda, sector 21297 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1409.977778] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1409.977789] I/O error, dev sda, sector 21298 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1425.212258] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1440.568706] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1455.932654] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1471.289745] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1486.648983] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1502.012084] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1502.141278] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1502.141300] I/O error, dev sda, sector 21427 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1517.371252] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1517.500542] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1517.500599] I/O error, dev sda, sector 20518 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 1517.500759] exFAT-fs (sda1): failed to load alloc-bitmap
[ 1517.500774] exFAT-fs (sda1): failed to recognize exfat type
[ 1532.729412] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1548.094444] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1563.452491] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1563.584781]  sda: sda1
[ 1578.815609] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1594.171970] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1609.534856] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1609.662751] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1609.662776] I/O error, dev sda, sector 499743776 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1609.663147] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1609.663168] I/O error, dev sda, sector 499743776 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 1609.663187] Buffer I/O error on dev sda, logical block 62467972, async page read
[ 1609.674792]  sda: sda1
[ 1624.894951] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1640.251081] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1640.377870] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1640.377890] I/O error, dev sda, sector 499742720 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1655.610081] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1655.738241] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1655.738256] I/O error, dev sda, sector 499742720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 1655.738268] Buffer I/O error on dev sda, logical block 62467840, async page read
[ 1670.971254] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1671.108895]  sda: sda1
[ 1686.336198] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1701.694480] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1717.056260] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1732.414398] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1732.548914]  sda: sda1
[ 1747.772567] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1747.915616] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1747.915642] I/O error, dev sda, sector 2072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1763.133554] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1778.494468] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1778.622732] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1778.622751] I/O error, dev sda, sector 499744496 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 2
[ 1778.623042] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1778.623055] I/O error, dev sda, sector 499744736 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 1793.856841] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1793.989567] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1793.989617] I/O error, dev sda, sector 2064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1793.990306] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1793.990327] I/O error, dev sda, sector 2088 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[ 1793.990729] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1793.990747] I/O error, dev sda, sector 2120 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 2
[ 1809.725597] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1825.082867] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1825.209823] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1825.209841] I/O error, dev sda, sector 499744464 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 1825.209856] Buffer I/O error on dev sda, logical block 62468058, async page read
[ 1840.444678] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1855.807907] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1855.946621]  sda: sda1
[ 1855.948761] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1871.163742] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1886.528696] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1901.885663] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1917.245648] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1917.372705] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1917.372724] I/O error, dev sda, sector 21314 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1917.373080] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1917.373093] I/O error, dev sda, sector 21315 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1917.373258] sd 2:0:0:0: [sda] tag#0 device offline or changed
[ 1917.373269] I/O error, dev sda, sector 21316 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1932.603779] usb 1-1: reset high-speed USB device number 8 using xhci_hcd
[ 1943.953991] usb 1-1: USB disconnect, device number 8
[ 1943.954353] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=11s
[ 1943.954410] sd 2:0:0:0: [sda] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e3 00
[ 1943.954500] device offline error, dev sda, sector 760 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 2
[ 1943.954663] device offline error, dev sda, sector 21349 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.954698] device offline error, dev sda, sector 1000 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 1943.954784] device offline error, dev sda, sector 520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 1943.954882] Buffer I/O error on dev sda, logical block 65, async page read
[ 1943.954966] device offline error, dev sda, sector 21350 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.955322] device offline error, dev sda, sector 21351 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.955458] device offline error, dev sda, sector 21352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.955515] device offline error, dev sda, sector 21353 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.955562] device offline error, dev sda, sector 21354 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 1943.956033] exFAT-fs (sda1): failed to read sector(0x4a00)
[ 1943.956042] exFAT-fs (sda1): failed to load upcase table
[ 1943.956045] exFAT-fs (sda1): failed to recognize exfat type
[ 2018.265482] usb 1-1: new low-speed USB device number 9 using xhci_hcd
[ 2018.395368] usb 1-1: New USB device found, idVendor=17ef, idProduct=6019, bcdDevice= 1.00
[ 2018.395405] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2018.395413] usb 1-1: Product: Lenovo USB Optical Mouse
[ 2018.395419] usb 1-1: Manufacturer: PixArt
[ 2018.508926] input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:17EF:6019.0002/input/input21
[ 2018.510113] hid-generic 0003:17EF:6019.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-1/input0
[ 2018.510238] usbcore: registered new interface driver usbhid
[ 2018.510244] usbhid: USB HID core driver
[ 2056.360313] usb 1-1: USB disconnect, device number 9
[ 2058.187566] usb 1-1: new high-speed USB device number 10 using xhci_hcd
[ 2058.313790] usb 1-1: New USB device found, idVendor=aaaa, idProduct=8816, bcdDevice=13.08
[ 2058.313808] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2058.313816] usb 1-1: Product: MXT USB Device
[ 2058.313821] usb 1-1: Manufacturer: MXTronics
[ 2058.313826] usb 1-1: SerialNumber: 150101v01
[ 2058.317525] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2058.318345] scsi host2: usb-storage 1-1:1.0
[ 2059.322532] scsi 2:0:0:0: Direct-Access     MXT-USB  Storage Device   1501 PQ: 0 ANSI: 0 CCS
[ 2059.326611] sd 2:0:0:0: [sda] 499744768 512-byte logical blocks: (256 GB/238 GiB)
[ 2059.327814] sd 2:0:0:0: [sda] Write Protect is off
[ 2059.327838] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 2059.328227] sd 2:0:0:0: [sda] No Caching mode page found
[ 2059.328245] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 2059.332741]  sda: sda1
[ 2059.333020] sd 2:0:0:0: [sda] Attached SCSI removable disk

Offline

#15 2024-05-28 15:57:15

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 75,984

Re: sd reader does not work

Again: please dont bump.

Is this an internal cardreader? If it's an external one, have you tried to plug it into another computer and read the card there?

[ 1855.948761] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

The reader resets every 15-16s, that's not random.
Does it work on the rescue.target (2nd link below)?
Does it work if you log in as different user?

Please post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

Pages: 1

Board footer

Powered by FluxBB