You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2024-08-28 12:36:57
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
[SOLVED] SDDM snaps back to login window
I just updated my installation , system boots normally but when I enter password for my user at SDDM login prompt it immediately snaps back again to same window not letting me login to my system. I am posting Xorg.0.log here , if someone can guide me what went wrong with my system.
[ 62.224] (--) Log file renamed from "/var/log/Xorg.pid-728.log" to "/var/log/Xorg.0.log"
[ 62.225]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 62.225] Current Operating System: Linux home-pc 6.6.47-1-lts #1 SMP PREEMPT_DYNAMIC Mon, 19 Aug 2024 05:13:57 +0000 x86_64
[ 62.225] Kernel command line: BOOT_IMAGE=(hd0,9)/boot/vmlinuz-linux-lts root=/dev/sda9 rw loglevel=3 quiet resume=/dev/sda5 nowatchdog
[ 62.225]
[ 62.225] Current version of pixman: 0.43.4
[ 62.225] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 62.225] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62.225] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 28 16:21:09 2024
[ 62.226] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 62.226] (==) No Layout section. Using the first Screen section.
[ 62.226] (==) No screen section available. Using defaults.
[ 62.226] (**) |-->Screen "Default Screen Section" (0)
[ 62.226] (**) | |-->Monitor "<default monitor>"
[ 62.226] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 62.227] (**) Allowing byte-swapped clients
[ 62.227] (==) Automatically adding devices
[ 62.227] (==) Automatically enabling devices
[ 62.227] (==) Automatically adding GPU devices
[ 62.227] (==) Automatically binding GPU devices
[ 62.227] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 62.227] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 62.227] Entry deleted from font path.
[ 62.227] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 62.227] Entry deleted from font path.
[ 62.227] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 62.227] Entry deleted from font path.
[ 62.227] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 62.227] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62.227] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62.227] (II) Module ABI versions:
[ 62.227] X.Org ANSI C Emulation: 0.4
[ 62.227] X.Org Video Driver: 25.2
[ 62.227] X.Org XInput driver : 24.4
[ 62.227] X.Org Server Extension : 10.0
[ 62.228] (++) using VT number 2
[ 62.228] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 62.231] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 62.231] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 62.249] (--) PCI:*(0@0:2:0) 8086:0f31:17aa:3807 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8, BIOS @ 0x????????/131072
[ 62.249] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 62.249] (II) LoadModule: "glx"
[ 62.249] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62.253] (II) Module glx: vendor="X.Org Foundation"
[ 62.253] compiled for 1.21.1.13, module version = 1.0.0
[ 62.253] ABI class: X.Org Server Extension, version 10.0
[ 62.253] (==) Matched intel as autoconfigured driver 0
[ 62.253] (==) Matched modesetting as autoconfigured driver 1
[ 62.253] (==) Matched fbdev as autoconfigured driver 2
[ 62.253] (==) Matched vesa as autoconfigured driver 3
[ 62.253] (==) Assigned the driver to the xf86ConfigLayout
[ 62.253] (II) LoadModule: "intel"
[ 62.253] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 62.254] (II) Module intel: vendor="X.Org Foundation"
[ 62.254] compiled for 1.21.1.11, module version = 2.99.917
[ 62.254] Module class: X.Org Video Driver
[ 62.254] ABI class: X.Org Video Driver, version 25.2
[ 62.254] (II) LoadModule: "modesetting"
[ 62.254] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 62.256] (II) Module modesetting: vendor="X.Org Foundation"
[ 62.256] compiled for 1.21.1.13, module version = 1.21.1
[ 62.256] Module class: X.Org Video Driver
[ 62.256] ABI class: X.Org Video Driver, version 25.2
[ 62.256] (II) LoadModule: "fbdev"
[ 62.256] (WW) Warning, couldn't open module fbdev
[ 62.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 62.256] (II) LoadModule: "vesa"
[ 62.257] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 62.257] (II) Module vesa: vendor="X.Org Foundation"
[ 62.257] compiled for 1.21.1.11, module version = 2.6.0
[ 62.257] Module class: X.Org Video Driver
[ 62.257] ABI class: X.Org Video Driver, version 25.2
[ 62.257] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 62.257] (II) intel: Driver for Intel(R) HD Graphics
[ 62.257] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 62.257] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 62.257] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 62.257] (II) VESA: driver for VESA chipsets: vesa
[ 62.262] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 62.262] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[ 62.263] (WW) Falling back to old probe method for modesetting
[ 62.263] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 62.264] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 62.264] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 62.264] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 62.264] (==) intel(0): RGB weight 888
[ 62.264] (==) intel(0): Default visual is TrueColor
[ 62.265] (II) intel(0): Output eDP1 has no monitor section
[ 62.265] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 62.265] (II) intel(0): Enabled output eDP1
[ 62.265] (II) intel(0): Output VGA1 has no monitor section
[ 62.265] (II) intel(0): Enabled output VGA1
[ 62.266] (II) intel(0): Output DP1 has no monitor section
[ 62.266] (II) intel(0): Enabled output DP1
[ 62.266] (II) intel(0): Output HDMI1 has no monitor section
[ 62.266] (II) intel(0): Enabled output HDMI1
[ 62.266] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 62.266] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 62.266] (II) intel(0): Enabled output VIRTUAL1
[ 62.266] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 62.266] (==) intel(0): TearFree disabled
[ 62.267] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 62.267] (==) intel(0): DPI set to (96, 96)
[ 62.267] (II) Loading sub module "dri3"
[ 62.267] (II) LoadModule: "dri3"
[ 62.267] (II) Module "dri3" already built-in
[ 62.267] (II) Loading sub module "dri2"
[ 62.267] (II) LoadModule: "dri2"
[ 62.267] (II) Module "dri2" already built-in
[ 62.267] (II) Loading sub module "present"
[ 62.267] (II) LoadModule: "present"
[ 62.267] (II) Module "present" already built-in
[ 62.267] (II) UnloadModule: "modesetting"
[ 62.267] (II) Unloading modesetting
[ 62.267] (II) UnloadModule: "vesa"
[ 62.267] (II) Unloading vesa
[ 62.267] (II) intel(0): SNA initialized with Baytrail (gen7) backend
[ 62.267] (==) intel(0): Backing store enabled
[ 62.267] (==) intel(0): Silken mouse enabled
[ 62.268] (II) intel(0): HW Cursor enabled
[ 62.268] (==) intel(0): DPMS enabled
[ 62.268] (==) intel(0): Display hotplug detection enabled
[ 62.268] (II) intel(0): [DRI2] Setup complete
[ 62.268] (II) intel(0): [DRI2] DRI driver: i965
[ 62.268] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 62.268] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 62.268] (II) intel(0): hardware support for Present enabled
[ 62.268] (II) Initializing extension Generic Event Extension
[ 62.269] (II) Initializing extension SHAPE
[ 62.269] (II) Initializing extension MIT-SHM
[ 62.269] (II) Initializing extension XInputExtension
[ 62.270] (II) Initializing extension XTEST
[ 62.270] (II) Initializing extension BIG-REQUESTS
[ 62.270] (II) Initializing extension SYNC
[ 62.271] (II) Initializing extension XKEYBOARD
[ 62.271] (II) Initializing extension XC-MISC
[ 62.271] (II) Initializing extension SECURITY
[ 62.271] (II) Initializing extension XFIXES
[ 62.272] (II) Initializing extension RENDER
[ 62.272] (II) Initializing extension RANDR
[ 62.273] (II) Initializing extension COMPOSITE
[ 62.273] (II) Initializing extension DAMAGE
[ 62.273] (II) Initializing extension MIT-SCREEN-SAVER
[ 62.274] (II) Initializing extension DOUBLE-BUFFER
[ 62.274] (II) Initializing extension RECORD
[ 62.274] (II) Initializing extension DPMS
[ 62.275] (II) Initializing extension Present
[ 62.275] (II) Initializing extension DRI3
[ 62.275] (II) Initializing extension X-Resource
[ 62.275] (II) Initializing extension XVideo
[ 62.276] (II) Initializing extension XVideo-MotionCompensation
[ 62.276] (II) Initializing extension GLX
[ 62.276] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 62.276] (EE) AIGLX error: unable to load driver i965
[ 62.339] (II) IGLX: Loaded and initialized swrast
[ 62.339] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 62.339] (II) Initializing extension XFree86-VidModeExtension
[ 62.339] (II) Initializing extension XFree86-DGA
[ 62.340] (II) Initializing extension XFree86-DRI
[ 62.340] (II) Initializing extension DRI2
[ 62.345] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 62.359] (II) intel(0): Setting screen physical size to 361 x 203
[ 62.579] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 62.579] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 62.579] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 62.579] (II) LoadModule: "libinput"
[ 62.579] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 62.582] (II) Module libinput: vendor="X.Org Foundation"
[ 62.583] compiled for 1.21.1.13, module version = 1.4.0
[ 62.583] Module class: X.Org XInput Driver
[ 62.583] ABI class: X.Org XInput driver, version 24.4
[ 62.583] (II) Using input driver 'libinput' for 'Power Button'
[ 62.583] (**) Power Button: always reports core events
[ 62.583] (**) Option "Device" "/dev/input/event3"
[ 62.589] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 62.589] (II) event3 - Power Button: device is a keyboard
[ 62.590] (II) event3 - Power Button: device removed
[ 62.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 62.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 62.616] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 62.616] (II) event3 - Power Button: device is a keyboard
[ 62.618] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 62.618] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 62.618] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 62.618] (II) Using input driver 'libinput' for 'Video Bus'
[ 62.618] (**) Video Bus: always reports core events
[ 62.618] (**) Option "Device" "/dev/input/event7"
[ 62.620] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 62.621] (II) event7 - Video Bus: device is a keyboard
[ 62.621] (II) event7 - Video Bus: device removed
[ 62.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[ 62.660] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 62.663] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 62.664] (II) event7 - Video Bus: device is a keyboard
[ 62.665] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 62.665] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 62.665] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 62.665] (II) Using input driver 'libinput' for 'Power Button'
[ 62.665] (**) Power Button: always reports core events
[ 62.665] (**) Option "Device" "/dev/input/event1"
[ 62.667] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 62.668] (II) event1 - Power Button: device is a keyboard
[ 62.668] (II) event1 - Power Button: device removed
[ 62.687] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 62.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 62.690] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 62.690] (II) event1 - Power Button: device is a keyboard
[ 62.692] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 62.692] (II) No input driver specified, ignoring this device.
[ 62.692] (II) This device may have been added with another device file.
[ 62.693] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 62.693] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62.693] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 62.693] (II) Using input driver 'libinput' for 'Sleep Button'
[ 62.693] (**) Sleep Button: always reports core events
[ 62.693] (**) Option "Device" "/dev/input/event2"
[ 62.695] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 62.695] (II) event2 - Sleep Button: device is a keyboard
[ 62.696] (II) event2 - Sleep Button: device removed
[ 62.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 62.714] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 62.716] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 62.716] (II) event2 - Sleep Button: device is a keyboard
[ 62.720] (II) config/udev: Adding input device Chicony USB LaserStream(TM) Mouse (/dev/input/event5)
[ 62.720] (**) Chicony USB LaserStream(TM) Mouse: Applying InputClass "evdev pointer catchall"
[ 62.720] (**) Chicony USB LaserStream(TM) Mouse: Applying InputClass "libinput pointer catchall"
[ 62.720] (II) Using input driver 'libinput' for 'Chicony USB LaserStream(TM) Mouse'
[ 62.720] (**) Chicony USB LaserStream(TM) Mouse: always reports core events
[ 62.720] (**) Option "Device" "/dev/input/event5"
[ 62.781] (II) event5 - Chicony USB LaserStream(TM) Mouse: is tagged by udev as: Mouse
[ 62.782] (II) event5 - Chicony USB LaserStream(TM) Mouse: device is a pointer
[ 62.783] (II) event5 - Chicony USB LaserStream(TM) Mouse: device removed
[ 62.820] (II) libinput: Chicony USB LaserStream(TM) Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 62.820] (II) libinput: Chicony USB LaserStream(TM) Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 62.820] (II) libinput: Chicony USB LaserStream(TM) Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 62.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:04F2:1317.0001/input/input6/event5"
[ 62.820] (II) XINPUT: Adding extended input device "Chicony USB LaserStream(TM) Mouse" (type: MOUSE, id 10)
[ 62.821] (**) Option "AccelerationScheme" "none"
[ 62.821] (**) Chicony USB LaserStream(TM) Mouse: (accel) selected scheme none/0
[ 62.821] (**) Chicony USB LaserStream(TM) Mouse: (accel) acceleration factor: 2.000
[ 62.821] (**) Chicony USB LaserStream(TM) Mouse: (accel) acceleration threshold: 4
[ 62.882] (II) event5 - Chicony USB LaserStream(TM) Mouse: is tagged by udev as: Mouse
[ 62.882] (II) event5 - Chicony USB LaserStream(TM) Mouse: device is a pointer
[ 62.885] (II) config/udev: Adding input device Chicony USB LaserStream(TM) Mouse (/dev/input/mouse0)
[ 62.885] (II) No input driver specified, ignoring this device.
[ 62.885] (II) This device may have been added with another device file.
[ 62.887] (II) config/udev: Adding input device Chicony USB LaserStream(TM) Mouse Consumer Control (/dev/input/event6)
[ 62.887] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 62.887] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 62.887] (II) Using input driver 'libinput' for 'Chicony USB LaserStream(TM) Mouse Consumer Control'
[ 62.887] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: always reports core events
[ 62.887] (**) Option "Device" "/dev/input/event6"
[ 62.891] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: is tagged by udev as: Keyboard
[ 62.891] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: device is a keyboard
[ 62.892] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: device removed
[ 62.913] (II) libinput: Chicony USB LaserStream(TM) Mouse Consumer Control: needs a virtual subdevice
[ 62.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F2:1317.0002/input/input7/event6"
[ 62.914] (II) XINPUT: Adding extended input device "Chicony USB LaserStream(TM) Mouse Consumer Control" (type: MOUSE, id 11)
[ 62.914] (**) Option "AccelerationScheme" "none"
[ 62.914] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: (accel) selected scheme none/0
[ 62.914] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 62.914] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: (accel) acceleration threshold: 4
[ 62.918] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: is tagged by udev as: Keyboard
[ 62.918] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: device is a keyboard
[ 62.920] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 62.920] (II) No input driver specified, ignoring this device.
[ 62.920] (II) This device may have been added with another device file.
[ 62.921] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 62.921] (II) No input driver specified, ignoring this device.
[ 62.921] (II) This device may have been added with another device file.
[ 62.922] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 62.922] (II) No input driver specified, ignoring this device.
[ 62.922] (II) This device may have been added with another device file.
[ 62.924] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 62.924] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 62.924] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 62.924] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 62.924] (**) Ideapad extra buttons: always reports core events
[ 62.924] (**) Option "Device" "/dev/input/event8"
[ 62.926] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 62.926] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 62.927] (II) event8 - Ideapad extra buttons: device removed
[ 62.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9/event8"
[ 62.967] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 62.970] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 62.970] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 62.972] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 62.972] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.972] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 62.972] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 62.972] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.972] (**) Option "Device" "/dev/input/event4"
[ 62.974] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 62.975] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 62.977] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 62.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 62.994] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 62.997] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 62.997] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 63.001] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 63.001] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 63.001] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 63.001] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 63.001] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 63.001] (**) Option "Device" "/dev/input/event10"
[ 63.003] (II) event10 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 63.007] (II) event10 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 63.008] (II) event10 - ETPS/2 Elantech Touchpad: device removed
[ 63.047] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 63.047] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 63.047] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 63.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event10"
[ 63.048] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 63.050] (**) Option "AccelerationScheme" "none"
[ 63.051] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 63.051] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 63.051] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 63.053] (II) event10 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 63.057] (II) event10 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 63.059] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 63.059] (II) No input driver specified, ignoring this device.
[ 63.059] (II) This device may have been added with another device file.
[ 63.060] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 63.060] (II) No input driver specified, ignoring this device.
[ 63.060] (II) This device may have been added with another device file.
[ 63.096] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 63.096] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 63.096] (II) Using input driver 'libinput' for 'Chicony USB LaserStream(TM) Mouse Consumer Control'
[ 63.096] (**) Chicony USB LaserStream(TM) Mouse Consumer Control: always reports core events
[ 63.096] (**) Option "Device" "/dev/input/event6"
[ 63.096] (II) libinput: Chicony USB LaserStream(TM) Mouse Consumer Control: is a virtual subdevice
[ 63.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:04F2:1317.0002/input/input7/event6"
[ 63.096] (II) XINPUT: Adding extended input device "Chicony USB LaserStream(TM) Mouse Consumer Control" (type: KEYBOARD, id 15)
[ 64.271] (II) intel(0): EDID vendor "IVO", prod id 1161
[ 64.271] (II) intel(0): Printing DDC gathered Modelines:
[ 64.271] (II) intel(0): Modeline "1366x768"x0.0 69.70 1366 1386 1406 1478 768 770 774 786 -hsync -vsync (47.2 kHz eP)
[ 68.413] (II) event3 - Power Button: device removed
[ 68.430] (II) event7 - Video Bus: device removed
[ 68.463] (II) event1 - Power Button: device removed
[ 68.474] (II) event2 - Sleep Button: device removed
[ 68.498] (II) event5 - Chicony USB LaserStream(TM) Mouse: device removed
[ 68.520] (II) event8 - Ideapad extra buttons: device removed
[ 68.547] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 68.560] (II) event10 - ETPS/2 Elantech Touchpad: device removed
[ 68.583] (II) event6 - Chicony USB LaserStream(TM) Mouse Consumer Control: device removed
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.605] (II) UnloadModule: "libinput"
[ 68.606] (II) UnloadModule: "libinput"
[ 68.711] (II) Server terminated successfully (0). Closing log file. Last edited by saleem (2024-08-29 06:39:43)
Offline
#2 2024-08-28 13:11:32
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 75,817
Re: [SOLVED] SDDM snaps back to login window
[ 62.339] (II) IGLX: Loaded and initialized swrast
[ 62.339] (II) GLX: Initialized DRISWRAST GL provider for screen 0Get rid of xf86-video-intel, but this isn't an X11 problem* - the session dies/crashes/fails => check your system jounal
*the session process might refuse to run on software GL, though.
Offline
#3 2024-08-28 14:42:25
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
Re: [SOLVED] SDDM snaps back to login window
seth wrote:
[ 62.339] (II) IGLX: Loaded and initialized swrast [ 62.339] (II) GLX: Initialized DRISWRAST GL provider for screen 0Get rid of xf86-video-intel, but this isn't an X11 problem* - the session dies/crashes/fails => check your system jounal
*the session process might refuse to run on software GL, though.
Will do that and meanwhile I disabled sddm and logged in to openbox by startx but desktop/system freeze in few seconds and there is a popup window in the middle of the screen shown here in screenshot
Had to hard reset laptop
Offline
#4 2024-08-28 14:44:22
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 75,817
Re: [SOLVED] SDDM snaps back to login window
Your xinitrc is broken - post it, but you should™ still be able to switch the VT at this point.
Offline
#5 2024-08-28 15:33:16
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
Re: [SOLVED] SDDM snaps back to login window
seth wrote:
Your xinitrc is broken - post it, but you should™ still be able to switch the VT at this point.
#!/bin/sh
#
export GTK2_RC_FILES="$HOME/.gtkrc-2.0"
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec openbox-sessionOffline
#6 2024-08-28 15:48:19
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 75,817
Re: [SOLVED] SDDM snaps back to login window
No, it's not?
ls -l /etc/X11/xinit/xinitrc.d
echo $DBUS_SESSION_BUS_ADDRESS
ps aux | grep dbusNext step will be
printenv
sudo journalctl -b | curl -F 'file=@-' 0x0.st…
Offline
#7 2024-08-28 17:02:56
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
Re: [SOLVED] SDDM snaps back to login window
seth wrote:
No, it's not?
ls -l /etc/X11/xinit/xinitrc.d echo $DBUS_SESSION_BUS_ADDRESS ps aux | grep dbusNext step will be
printenv sudo journalctl -b | curl -F 'file=@-' 0x0.st…
Sorry since I can't login to desktop I'm running these commands at tty and uploaded the screenshot, I think I might have messed up some commands
im posting these commands by chrooting into that partition and getting out put , I am not sure if it will help in any way
# echo $DBUS_SESSION_BUS_ADDRESS
l[root@home-pc /]# ps aux | grep dbus
dbus 314 0.0 0.0 9464 1216 ? Ss 22:03 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
1001 489 0.0 0.0 8952 448 ? Ss 22:04 0:00 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
1001 532 0.0 0.0 8672 700 ? S 22:04 0:00 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=unix:path=/run/user/1001/at-spi/bus_0
root 1782 0.0 0.1 6716 2072 pts/3 S+ 22:16 0:00 grep dbus# journalctl -b | curl -F 'file=@-' 0x0.st
http://0x0.st/XtGl.txt
Nope! this last command copied the log from host installation not from the partition to which I have chrooted
Here is the correct file in screenshot, sorry for all the trouble
Last edited by saleem (2024-08-28 17:38:42)
Offline
#8 2024-08-28 17:58:48
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
Re: [SOLVED] SDDM snaps back to login window
@seth,
I think I found the culprit , I made some changes in /etc/environment file , which commented those out system boots by startsx and will test it with sddm as well. Boot normal with sddm as well now.
here is what I messed up in environment file which I believe should be blank by default
lLANG=en_US.UTF-8
LC_ALL=en_US.UTF-8
#XDG_SESSION_TYPE=openbox
#DESKTOP_SESSION=openbox
#XDG_COLOR_SCHEME=default
#XDG_FONT_PATH=/usr/share/fonts
#XDG_THEME=default
QT_QPA_PLATFORMTHEME=qt5ct
BROWSER=/usr/bin/firefox
EDITOR=geanyLast edited by saleem (2024-08-28 18:02:36)
Offline
#9 2024-08-28 20:08:40
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 75,817
Re: [SOLVED] SDDM snaps back to login window
* lLANG=en_US.UTF-8
"LANG", but this is set in /etc/locale.conf
* LC_ALL=en_US.UTF-8
LC_ALL is typically only for debugging and should not be generally set
* #XDG_SESSION_TYPE=openbox
===>>>> This is bogus, it's tty, wayland or x11 and you should not set it in /etc/environment either, see eg. https://wiki.archlinux.org/title/Getty#Virtual_console but not when using SDDM
The only location where you kinda need to set this is if you're manually starting KDE or gnome.
* #DESKTOP_SESSION=openbox
This is typically set by the session, but I'd not suspect harm from it
* #XDG_FONT_PATH
* #XDG_THEME
I don't think that's a thing
Offline
#10 2024-08-29 06:38:40
- saleem
- Member
- Registered: 2011-09-21
- Posts: 168
Re: [SOLVED] SDDM snaps back to login window
seth wrote:
* lLANG=en_US.UTF-8
"LANG", but this is set in /etc/locale.conf
* LC_ALL=en_US.UTF-8
LC_ALL is typically only for debugging and should not be generally set* #XDG_SESSION_TYPE=openbox
===>>>> This is bogus, it's tty, wayland or x11 and you should not set it in /etc/environment either, see eg. https://wiki.archlinux.org/title/Getty#Virtual_console but not when using SDDM
The only location where you kinda need to set this is if you're manually starting KDE or gnome.* #DESKTOP_SESSION=openbox
This is typically set by the session, but I'd not suspect harm from it* #XDG_FONT_PATH
* #XDG_THEME
I don't think that's a thing
Thanks for the clarification , sometimes overdoing things do create problems than any betterment.
Offline
Pages: 1