You are not logged in.
I have an issue when I launch games, CPU becomes more than 500% on top command and games are lagging. Could you help me fix this issue for improve gaming experience.
I am using Heroic with Proton-GE-Latest. I have installed Nvidia drivers and test it using geekbench and nvtop.
top - 09:54:23 up 25 min, 2 users, load average: 8.91, 4.37, 4.00
Tasks: 297 total, 8 running, 289 sleeping, 0 stopped, 0 zombie
%Cpu(s): 69.3 us, 23.4 sy, 0.0 ni, 3.7 id, 0.0 wa, 3.5 hi, 0.1 si, 0.0 st
MiB Mem : 7575.5 total, 79.0 free, 6079.9 used, 1972.2 buff/cache
MiB Swap: 3787.5 total, 521.4 free, 3266.1 used. 1495.5 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
5811 arch 20 0 80.2g 3.4g 342044 R 895.1 45.7 10:21.86 Main
115 root 20 0 0 0 0 R 94.7 0.0 2:08.72 kswapd0
915 arch 20 0 7081776 201732 112020 R 40.1 2.6 0:46.07 plasmashell
767 arch -2 0 2950976 137124 108556 S 18.8 1.8 1:31.26 kwin_wayland
5766 arch 20 0 26484 5248 1976 R 16.4 0.1 0:17.59 wineserver
698 arch 9 -11 203556 26192 6884 S 12.2 0.3 0:51.47 pipewire-pulse
695 arch 9 -11 174836 12468 7124 S 6.6 0.2 0:29.14 pipewire
1476 arch 20 0 1132.3g 59788 42132 S 6.2 0.8 0:41.77 heroic
5531 root 20 0 0 0 0 R 3.9 0.0 0:01.20 kworker/u48:4+flush-259:0
5867 arch 20 0 1483816 100148 94956 S 3.3 1.3 0:04.88 konsole
4772 arch 20 0 1894004 115096 107940 R 3.0 1.5 0:05.36 dolphin
120 root 20 0 0 0 0 D 2.0 0.0 0:05.90 kworker/u48:3+ext4-rsv-conversion
5783 arch 20 0 2241168 8452 8432 S 2.0 0.1 0:03.37 winedevice.exe
841 arch 20 0 643548 52380 46996 S 1.6 0.7 0:17.57 Xwayland
5913 arch 20 0 9752 6168 4632 R 0.7 0.1 0:00.90 top
6128 root 0 -20 0 0 0 I 0.7 0.0 0:00.16 kworker/u49:3-i915_flip
96 root 20 0 0 0 0 I 0.3 0.0 0:05.38 kworker/u48:2-i915
116 root 20 0 0 0 0 I 0.3 0.0 0:00.60 kworker/4:1-events
138 root 20 0 0 0 0 I 0.3 0.0 0:00.15 kworker/3:1-mm_percpu_wq
139 root 20 0 0 0 0 I 0.3 0.0 0:00.08 kworker/10:1-mm_percpu_wq
229 root 0 -20 0 0 0 I 0.3 0.0 0:00.27 kworker/4:1H-kblockd
245 root 20 0 0 0 0 I 0.3 0.0 0:00.13 kworker/2:3-events
562 root -51 0 0 0 0 R 0.3 0.0 0:03.97 irq/158-rtw89_pci
1145 arch 20 0 1687212 32172 30736 S 0.3 0.4 0:03.29 fdm
1506 arch 20 0 32.9g 58072 50884 S 0.3 0.7 0:15.07 heroic
1 root 20 0 21056 5056 4168 S 0.0 0.1 0:02.48 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.01 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pool_workqueue_release
4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-rcu_gp
5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-sync_wq
6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-slub_flushwq
7 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-netns
9 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-events_highpri
11 root 20 0 0 0 0 I 0.0 0.0 0:05.77 kworker/u48:0-events_unbound
12 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-mm_percpu_wq
14 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_kthread
Last edited by a04173c4 (2024-09-16 09:11:39)
Offline
You're likely rendering in software.
glxinfo -B
qdbus org.kde.KWin /KWin supportInformation
vulkaninfo --summary
Offline
You're likely rendering in software.
https://bbs.archlinux.org/profile.php?id=162125 glxinfo -B qdbus org.kde.KWin /KWin supportInformation vulkaninfo --summary
I'm using GNOME Classic On Xorg. I also set optimus-manager to hybrid with enabling power management. Some games work fine but other not. Also, when I launch mangohud, I noticed DXVK latency becomes more than 50ms.
glxinfo -B:
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: Intel (0x8086)
Device: Mesa Intel(R) Graphics (ADL GT2) (0x4628)
Version: 24.2.2
Accelerated: yes
Video memory: 3787MB
Unified memory: yes
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) Graphics (ADL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 24.2.2-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 24.2.2-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 24.2.2-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
qdbus org.kde.KWin /KWin supportInformation:
Service 'org.kde.KWin' does not exist.
vulkaninfo --summary:
==========
VULKANINFO
==========
Vulkan Instance Version: 1.3.295
Instance Extensions: count = 23
-------------------------------
VK_EXT_acquire_drm_display : extension revision 1
VK_EXT_acquire_xlib_display : extension revision 1
VK_EXT_debug_report : extension revision 10
VK_EXT_debug_utils : extension revision 2
VK_EXT_direct_mode_display : extension revision 1
VK_EXT_display_surface_counter : extension revision 1
VK_EXT_surface_maintenance1 : extension revision 1
VK_EXT_swapchain_colorspace : extension revision 4
VK_KHR_device_group_creation : extension revision 1
VK_KHR_display : extension revision 23
VK_KHR_external_fence_capabilities : extension revision 1
VK_KHR_external_memory_capabilities : extension revision 1
VK_KHR_external_semaphore_capabilities : extension revision 1
VK_KHR_get_display_properties2 : extension revision 1
VK_KHR_get_physical_device_properties2 : extension revision 2
VK_KHR_get_surface_capabilities2 : extension revision 1
VK_KHR_portability_enumeration : extension revision 1
VK_KHR_surface : extension revision 25
VK_KHR_surface_protected_capabilities : extension revision 1
VK_KHR_wayland_surface : extension revision 6
VK_KHR_xcb_surface : extension revision 6
VK_KHR_xlib_surface : extension revision 6
VK_LUNARG_direct_driver_loading : extension revision 1
Instance Layers: count = 11
---------------------------
VK_LAYER_AMD_switchable_graphics_32 AMD switchable graphics layer 1.3.293 version 1
VK_LAYER_MANGOAPP_overlay Mangoapp Layer 1.3.0 version 1
VK_LAYER_MANGOAPP_overlay Mangoapp Layer 1.3.0 version 1
VK_LAYER_MANGOHUD_overlay_x86 Vulkan Hud Overlay 1.3.0 version 1
VK_LAYER_MANGOHUD_overlay_x86_64 Vulkan Hud Overlay 1.3.0 version 1
VK_LAYER_NV_optimus NVIDIA Optimus layer 1.3.277 version 1
VK_LAYER_NV_optimus NVIDIA Optimus layer 1.3.280 version 1
VK_LAYER_VALVE_steam_fossilize_32 Steam Pipeline Caching Layer 1.3.207 version 1
VK_LAYER_VALVE_steam_fossilize_64 Steam Pipeline Caching Layer 1.3.207 version 1
VK_LAYER_VALVE_steam_overlay_32 Steam Overlay Layer 1.3.207 version 1
VK_LAYER_VALVE_steam_overlay_64 Steam Overlay Layer 1.3.207 version 1
Devices:
========
GPU0:
apiVersion = 1.3.277
driverVersion = 550.107.2.0
vendorID = 0x10de
deviceID = 0x25a6
deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
deviceName = NVIDIA GeForce MX570
driverID = DRIVER_ID_NVIDIA_PROPRIETARY
driverName = NVIDIA
driverInfo = 550.107.02
conformanceVersion = 1.3.7.2
deviceUUID = fca86d7a-6ece-d459-b5a3-9c5fcc598b3c
driverUUID = 12adfef6-a92a-528b-8610-45df7fa0a5b8
GPU1:
apiVersion = 1.3.277
driverVersion = 550.107.2.0
vendorID = 0x10de
deviceID = 0x25a6
deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
deviceName = NVIDIA GeForce MX570
driverID = DRIVER_ID_NVIDIA_PROPRIETARY
driverName = NVIDIA
driverInfo = 550.107.02
conformanceVersion = 1.3.7.2
deviceUUID = fca86d7a-6ece-d459-b5a3-9c5fcc598b3c
driverUUID = 12adfef6-a92a-528b-8610-45df7fa0a5b8
Last edited by a04173c4 (2024-09-14 20:17:56)
Offline
Service 'org.kde.KWin' does not exist.
I'm using GNOME Classic On Xorg.
915 arch 20 0 7081776 201732 112020 R 40.1 2.6 0:46.07 plasmashell
767 arch -2 0 2950976 137124 108556 S 18.8 1.8 1:31.26 kwin_wayland
5867 arch 20 0 1483816 100148 94956 S 3.3 1.3 0:04.88 konsole
4772 arch 20 0 1894004 115096 107940 R 3.0 1.5 0:05.36 dolphin
Your top output suggest a plasma/wayland session?
I also set optimus-manager to hybrid
Which is default prime, you can ditch OM
Then see https://wiki.archlinux.org/title/PRIME# … _using_GPU
Offline
Service 'org.kde.KWin' does not exist.
I'm using GNOME Classic On Xorg.915 arch 20 0 7081776 201732 112020 R 40.1 2.6 0:46.07 plasmashell
767 arch -2 0 2950976 137124 108556 S 18.8 1.8 1:31.26 kwin_wayland
5867 arch 20 0 1483816 100148 94956 S 3.3 1.3 0:04.88 konsole
4772 arch 20 0 1894004 115096 107940 R 3.0 1.5 0:05.36 dolphinYour top output suggest a plasma/wayland session?
I also set optimus-manager to hybrid
Which is default prime, you can ditch OM
Then see https://wiki.archlinux.org/title/PRIME# … _using_GPU
I have add environment variables __NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia. Also, I have installed switcheroo-control and run enable --now to launch it and add it to startup. Games performance improved with some lagging and DXVK latency becomes less than 30ms, but still give me 250%+ for CPU usage!
COD WWII was working fine when I used Windows but now it shows:
It seems I missed something to complete gaming environment.
Last edited by a04173c4 (2024-09-15 06:49:11)
Offline
Stop flailing around, remove switcheroo-control, post your xrog log and the output of "prime-run glxinfo -B" and an actually relevant top batch.
If you move the target all the time (kde => gnome, OM => prime => sc) all information becomes dated and weÄll not be able to pin down anything because we can't even look at a specific situation.
Offline
Stop flailing around, remove switcheroo-control, post your xrog log and the output of "prime-run glxinfo -B" and an actually relevant top batch.
If you move the target all the time (kde => gnome, OM => prime => sc) all information becomes dated and weÄll not be able to pin down anything because we can't even look at a specific situation.
I have disabled switcheroo-control and removed it. Yesterday, I switches from KDE wayland and X11 to GNOME. I don't know about this "OM => prime => sc" but I have installed nvidia-open and optimus-manager github requirement to set mine to hybrid.
xorg.0.log file:
[ 5.185] (--) Log file renamed from "/var/log/Xorg.pid-699.log" to "/var/log/Xorg.0.log"
[ 5.186]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 5.186] Current Operating System: Linux ems.local 6.10.10-1-cachyos-eevdf #1 SMP PREEMPT_DYNAMIC Fri, 13 Sep 2024 20:06:34 +0000 x86_64
[ 5.186] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-cachyos-eevdf root=UUID=9c09fc26-1741-4be5-a588-d658664d7f18 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 nvidia-drm.modeset=1 nvidia_drm.fbdev=1
[ 5.186]
[ 5.186] Current version of pixman: 0.43.4
[ 5.186] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.186] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.186] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 15 08:53:56 2024
[ 5.187] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.187] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.188] (==) ServerLayout "layout"
[ 5.188] (**) |-->Screen "integrated" (0)
[ 5.188] (**) | |-->Monitor "<default monitor>"
[ 5.188] (**) | |-->Device "integrated"
[ 5.188] (**) | |-->GPUDevice "nvidia"
[ 5.188] (==) No monitor specified for screen "integrated".
Using a default monitor configuration.
[ 5.188] (**) |-->Inactive Device "nvidia"
[ 5.188] (**) Allowing byte-swapped clients
[ 5.188] (==) Automatically adding devices
[ 5.188] (==) Automatically enabling devices
[ 5.188] (==) Automatically adding GPU devices
[ 5.188] (==) Automatically binding GPU devices
[ 5.188] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.188] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.188] Entry deleted from font path.
[ 5.188] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.188] Entry deleted from font path.
[ 5.188] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.188] Entry deleted from font path.
[ 5.190] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.190] (**) ModulePath set to "/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 5.190] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.190] (II) Module ABI versions:
[ 5.190] X.Org ANSI C Emulation: 0.4
[ 5.190] X.Org Video Driver: 25.2
[ 5.190] X.Org XInput driver : 24.4
[ 5.190] X.Org Server Extension : 10.0
[ 5.190] (++) using VT number 2
[ 5.190] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.191] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.191] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 5.206] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.206] (II) Platform probe for /sys/devices/pci0000:00/0000:00:06.0/0000:01:00.0/drm/card1
[ 5.207] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 5.209] (--) PCI:*(0@0:2:0) 8086:4628:103c:8978 rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 5.209] (--) PCI: (1@0:0:0) 10de:25a6:103c:89a5 rev 161, Mem @ 0x81000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00005000/128
[ 5.209] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.209] (II) LoadModule: "glx"
[ 5.210] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.216] (II) Module glx: vendor="X.Org Foundation"
[ 5.216] compiled for 1.21.1.13, module version = 1.0.0
[ 5.216] ABI class: X.Org Server Extension, version 10.0
[ 5.216] (II) LoadModule: "modesetting"
[ 5.216] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.320] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.320] compiled for 1.21.1.13, module version = 1.21.1
[ 5.320] Module class: X.Org Video Driver
[ 5.320] ABI class: X.Org Video Driver, version 25.2
[ 5.320] (II) LoadModule: "nvidia"
[ 5.320] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.324] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.324] compiled for 1.6.99.901, module version = 1.0.0
[ 5.324] Module class: X.Org Video Driver
[ 5.324] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.324] (II) NVIDIA dlloader X Driver 550.107.02 Wed Jul 24 23:27:47 UTC 2024
[ 5.324] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.355] (II) modeset(0): using drv /dev/dri/card0
[ 5.355] (II) Loading sub module "fb"
[ 5.355] (II) LoadModule: "fb"
[ 5.355] (II) Module "fb" already built-in
[ 5.355] (II) Loading sub module "wfb"
[ 5.355] (II) LoadModule: "wfb"
[ 5.355] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.356] (II) Module wfb: vendor="X.Org Foundation"
[ 5.356] compiled for 1.21.1.13, module version = 1.0.0
[ 5.356] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.357] (II) modeset(0): Creating default Display subsection in Screen section
"integrated" for depth/fbbpp 24/32
[ 5.357] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5.357] (==) modeset(0): RGB weight 888
[ 5.357] (==) modeset(0): Default visual is TrueColor
[ 5.357] (II) Loading sub module "glamoregl"
[ 5.357] (II) LoadModule: "glamoregl"
[ 5.357] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.365] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.365] compiled for 1.21.1.13, module version = 1.0.1
[ 5.365] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.428] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 5.428] (II) modeset(0): glamor initialized
[ 5.428] (==) modeset(0): VariableRefresh: disabled
[ 5.428] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 5.430] (II) modeset(0): Output eDP-1 has no monitor section
[ 5.435] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5.435] (II) modeset(0): Output DP-1 has no monitor section
[ 5.435] (II) modeset(0): Output DP-2 has no monitor section
[ 5.435] (II) modeset(0): Output DP-3 has no monitor section
[ 5.435] (II) modeset(0): Output DP-4 has no monitor section
[ 5.437] (II) modeset(0): EDID for output eDP-1
[ 5.437] (II) modeset(0): Manufacturer: BOE Model: 9e1 Serial#: 0
[ 5.437] (II) modeset(0): Year: 2020 Week: 48
[ 5.437] (II) modeset(0): EDID Version: 1.4
[ 5.437] (II) modeset(0): Digital Display Input
[ 5.437] (II) modeset(0): 6 bits per channel
[ 5.437] (II) modeset(0): Digital interface is DisplayPort
[ 5.437] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 5.437] (II) modeset(0): Gamma: 2.20
[ 5.437] (II) modeset(0): No DPMS capabilities specified
[ 5.437] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 5.437] (II) modeset(0): First detailed timing is preferred mode
[ 5.437] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 5.437] (II) modeset(0): Display is continuous-frequency
[ 5.437] (II) modeset(0): redX: 0.580 redY: 0.364 greenX: 0.352 greenY: 0.573
[ 5.437] (II) modeset(0): blueX: 0.163 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 5.437] (II) modeset(0): Manufacturer's mask: 0
[ 5.437] (II) modeset(0): Supported detailed timing:
[ 5.437] (II) modeset(0): clock: 75.2 MHz Image Size: 344 x 194 mm
[ 5.437] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1574 h_border: 0
[ 5.437] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 796 v_border: 0
[ 5.437] (II) modeset(0): Supported detailed timing:
[ 5.437] (II) modeset(0): clock: 50.1 MHz Image Size: 344 x 194 mm
[ 5.437] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1574 h_border: 0
[ 5.437] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 796 v_border: 0
[ 5.437] (II) modeset(0): Unknown vendor-specific block 2
[ 5.437] (II) modeset(0): EDID (in hex):
[ 5.437] (II) modeset(0): 00ffffffffffff0009e5e10900000000
[ 5.437] (II) modeset(0): 301e0104952213780393f5945d5a9229
[ 5.437] (II) modeset(0): 1f505400000001010101010101010101
[ 5.437] (II) modeset(0): 0101010101015e1d56d050001c303020
[ 5.437] (II) modeset(0): 360058c21000001a941356d050001c30
[ 5.437] (II) modeset(0): 3020360058c21000001a000000000000
[ 5.437] (II) modeset(0): 00000000000000000000000000000002
[ 5.437] (II) modeset(0): 000d40ff0a3c7d11101f7d000000002d
[ 5.437] (II) modeset(0): Printing probed modes for output eDP-1
[ 5.437] (II) modeset(0): Modeline "1366x768"x60.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 5.437] (II) modeset(0): Modeline "1366x768"x40.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 5.437] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 5.437] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 5.437] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 5.437] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 5.437] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 5.437] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 5.437] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 5.437] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 5.437] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 5.437] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 5.437] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 5.437] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 5.437] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 5.437] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 5.437] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 5.437] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 5.437] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 5.437] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 5.437] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 5.442] (II) modeset(0): EDID for output HDMI-1
[ 5.442] (II) modeset(0): EDID for output DP-1
[ 5.442] (II) modeset(0): EDID for output DP-2
[ 5.442] (II) modeset(0): EDID for output DP-3
[ 5.442] (II) modeset(0): EDID for output DP-4
[ 5.442] (II) modeset(0): Output eDP-1 connected
[ 5.442] (II) modeset(0): Output HDMI-1 disconnected
[ 5.442] (II) modeset(0): Output DP-1 disconnected
[ 5.442] (II) modeset(0): Output DP-2 disconnected
[ 5.442] (II) modeset(0): Output DP-3 disconnected
[ 5.442] (II) modeset(0): Output DP-4 disconnected
[ 5.442] (II) modeset(0): Using exact sizes for initial modes
[ 5.442] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 5.442] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.442] (==) modeset(0): DPI set to (96, 96)
[ 5.442] (II) Loading sub module "fb"
[ 5.442] (II) LoadModule: "fb"
[ 5.442] (II) Module "fb" already built-in
[ 5.442] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 5.442] (==) NVIDIA(G0): RGB weight 888
[ 5.442] (==) NVIDIA(G0): Default visual is TrueColor
[ 5.442] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.442] (**) Option "AllowNVIDIAGpuScreens"
[ 5.442] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 5.442] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 5.442] (**) NVIDIA(G0): Option "Coolbits" "28"
[ 5.442] (**) NVIDIA(G0): Enabling 2D acceleration
[ 5.442] (II) Loading sub module "glxserver_nvidia"
[ 5.442] (II) LoadModule: "glxserver_nvidia"
[ 5.442] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so
[ 5.470] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 5.470] compiled for 1.6.99.901, module version = 1.0.0
[ 5.470] Module class: X.Org Server Extension
[ 5.470] (II) NVIDIA GLX Module 550.107.02 Wed Jul 24 23:31:40 UTC 2024
[ 5.470] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5.471] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce MX570 (GA107-A) at PCI:1:0:0
[ 5.471] (II) NVIDIA(G0): (GPU-0)
[ 5.471] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 5.471] (--) NVIDIA(G0): VideoBIOS: 94.07.5f.00.7c
[ 5.471] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 5.471] (II) NVIDIA(G0): Validated MetaModes:
[ 5.471] (II) NVIDIA(G0): "NULL"
[ 5.471] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 5.471] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 5.471] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 5.478] (==) modeset(0): Backing store enabled
[ 5.478] (==) modeset(0): Silken mouse enabled
[ 5.557] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5.557] (==) modeset(0): DPMS enabled
[ 5.557] (WW) modeset(0): Option "DRI" is not used
[ 5.557] (II) modeset(0): [DRI2] Setup complete
[ 5.557] (II) modeset(0): [DRI2] DRI driver: iris
[ 5.557] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5.558] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 5.558] (II) NVIDIA: access.
[ 5.568] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 5.568] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 5.568] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 5.568] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 5.568] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 5.568] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 5.568] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 5.568] (II) NVIDIA(G0): Config Options in the README.
[ 5.578] (II) NVIDIA(G0): Setting mode "NULL"
[ 5.580] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 5.580] (==) NVIDIA(G0): Backing store enabled
[ 5.580] (==) NVIDIA(G0): Silken mouse enabled
[ 5.581] (==) NVIDIA(G0): DPMS enabled
[ 5.581] (II) Loading sub module "dri2"
[ 5.581] (II) LoadModule: "dri2"
[ 5.581] (II) Module "dri2" already built-in
[ 5.581] (II) NVIDIA(G0): [DRI2] Setup complete
[ 5.581] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 5.581] (II) Initializing extension Generic Event Extension
[ 5.581] (II) Initializing extension SHAPE
[ 5.581] (II) Initializing extension MIT-SHM
[ 5.581] (II) Initializing extension XInputExtension
[ 5.581] (II) Initializing extension XTEST
[ 5.581] (II) Initializing extension BIG-REQUESTS
[ 5.581] (II) Initializing extension SYNC
[ 5.581] (II) Initializing extension XKEYBOARD
[ 5.581] (II) Initializing extension XC-MISC
[ 5.581] (II) Initializing extension SECURITY
[ 5.581] (II) Initializing extension XFIXES
[ 5.581] (II) Initializing extension RENDER
[ 5.581] (II) Initializing extension RANDR
[ 5.581] (II) Initializing extension COMPOSITE
[ 5.581] (II) Initializing extension DAMAGE
[ 5.581] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.581] (II) Initializing extension DOUBLE-BUFFER
[ 5.581] (II) Initializing extension RECORD
[ 5.581] (II) Initializing extension DPMS
[ 5.582] (II) Initializing extension Present
[ 5.582] (II) Initializing extension DRI3
[ 5.582] (II) Initializing extension X-Resource
[ 5.582] (II) Initializing extension XVideo
[ 5.582] (II) Initializing extension XVideo-MotionCompensation
[ 5.582] (II) Initializing extension GLX
[ 5.582] (II) Initializing extension GLX
[ 5.582] (II) Indirect GLX disabled.
[ 5.588] (II) AIGLX: Loaded and initialized iris
[ 5.588] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.588] (II) Initializing extension XFree86-VidModeExtension
[ 5.588] (II) Initializing extension XFree86-DGA
[ 5.588] (II) Initializing extension XFree86-DRI
[ 5.588] (II) Initializing extension DRI2
[ 5.588] (II) Initializing extension NV-GLX
[ 5.589] (II) Initializing extension NV-CONTROL
[ 5.589] (II) modeset(0): Damage tracking initialized
[ 5.589] (II) modeset(0): Setting screen physical size to 361 x 203
[ 5.626] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5.626] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.626] (**) Power Button: Applying InputClass "system-keyboard"
[ 5.626] (II) LoadModule: "libinput"
[ 5.626] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.628] (II) Module libinput: vendor="X.Org Foundation"
[ 5.628] compiled for 1.21.1.13, module version = 1.4.0
[ 5.628] Module class: X.Org XInput Driver
[ 5.628] ABI class: X.Org XInput driver, version 24.4
[ 5.628] (II) Using input driver 'libinput' for 'Power Button'
[ 5.628] (**) Power Button: always reports core events
[ 5.628] (**) Option "Device" "/dev/input/event2"
[ 5.630] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.630] (II) event2 - Power Button: device is a keyboard
[ 5.630] (II) event2 - Power Button: device removed
[ 5.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 5.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.630] (**) Option "xkb_model" "pc105+inet"
[ 5.630] (**) Option "xkb_layout" "us"
[ 5.630] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.644] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5.644] (II) event2 - Power Button: device is a keyboard
[ 5.644] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 5.644] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.644] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5.644] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.644] (**) Video Bus: always reports core events
[ 5.644] (**) Option "Device" "/dev/input/event11"
[ 5.644] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 5.644] (II) event11 - Video Bus: device is a keyboard
[ 5.644] (II) event11 - Video Bus: device removed
[ 5.652] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event11"
[ 5.652] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.652] (**) Option "xkb_model" "pc105+inet"
[ 5.652] (**) Option "xkb_layout" "us"
[ 5.652] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.652] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 5.652] (II) event11 - Video Bus: device is a keyboard
[ 5.652] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 5.652] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.652] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5.652] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.652] (**) Video Bus: always reports core events
[ 5.652] (**) Option "Device" "/dev/input/event10"
[ 5.653] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 5.653] (II) event10 - Video Bus: device is a keyboard
[ 5.653] (II) event10 - Video Bus: device removed
[ 5.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14/event10"
[ 5.667] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 5.667] (**) Option "xkb_model" "pc105+inet"
[ 5.667] (**) Option "xkb_layout" "us"
[ 5.667] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.668] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 5.668] (II) event10 - Video Bus: device is a keyboard
[ 5.668] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 5.668] (II) No input driver specified, ignoring this device.
[ 5.668] (II) This device may have been added with another device file.
[ 5.668] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 5.668] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 5.668] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 5.668] (II) Using input driver 'libinput' for 'Sleep Button'
[ 5.668] (**) Sleep Button: always reports core events
[ 5.668] (**) Option "Device" "/dev/input/event0"
[ 5.669] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5.669] (II) event0 - Sleep Button: device is a keyboard
[ 5.669] (II) event0 - Sleep Button: device removed
[ 5.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 5.669] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5.669] (**) Option "xkb_model" "pc105+inet"
[ 5.669] (**) Option "xkb_layout" "us"
[ 5.669] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.669] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5.669] (II) event0 - Sleep Button: device is a keyboard
[ 5.670] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Mouse (/dev/input/event8)
[ 5.670] (**) ELAN076D:00 04F3:3244 Mouse: Applying InputClass "libinput pointer catchall"
[ 5.670] (II) Using input driver 'libinput' for 'ELAN076D:00 04F3:3244 Mouse'
[ 5.670] (**) ELAN076D:00 04F3:3244 Mouse: always reports core events
[ 5.670] (**) Option "Device" "/dev/input/event8"
[ 5.671] (II) event8 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5.671] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 5.671] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 5.677] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.677] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.677] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN076D:00/0018:04F3:3244.0001/input/input11/event8"
[ 5.677] (II) XINPUT: Adding extended input device "ELAN076D:00 04F3:3244 Mouse" (type: MOUSE, id 10)
[ 5.677] (**) Option "AccelerationScheme" "none"
[ 5.677] (**) ELAN076D:00 04F3:3244 Mouse: (accel) selected scheme none/0
[ 5.677] (**) ELAN076D:00 04F3:3244 Mouse: (accel) acceleration factor: 2.000
[ 5.677] (**) ELAN076D:00 04F3:3244 Mouse: (accel) acceleration threshold: 4
[ 5.678] (II) event8 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5.678] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 5.678] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Mouse (/dev/input/mouse0)
[ 5.678] (II) No input driver specified, ignoring this device.
[ 5.678] (II) This device may have been added with another device file.
[ 5.679] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Touchpad (/dev/input/event9)
[ 5.679] (**) ELAN076D:00 04F3:3244 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.679] (II) Using input driver 'libinput' for 'ELAN076D:00 04F3:3244 Touchpad'
[ 5.679] (**) ELAN076D:00 04F3:3244 Touchpad: always reports core events
[ 5.679] (**) Option "Device" "/dev/input/event9"
[ 5.679] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 5.680] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 5.680] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 5.687] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.687] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.687] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN076D:00/0018:04F3:3244.0001/input/input13/event9"
[ 5.687] (II) XINPUT: Adding extended input device "ELAN076D:00 04F3:3244 Touchpad" (type: TOUCHPAD, id 11)
[ 5.688] (**) Option "AccelerationScheme" "none"
[ 5.688] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) selected scheme none/0
[ 5.688] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) acceleration factor: 2.000
[ 5.688] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) acceleration threshold: 4
[ 5.689] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 5.689] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 5.690] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Touchpad (/dev/input/mouse1)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.690] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event12)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.690] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event13)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.690] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event14)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.690] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event15)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.690] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event16)
[ 5.690] (II) No input driver specified, ignoring this device.
[ 5.690] (II) This device may have been added with another device file.
[ 5.691] (II) config/udev: Adding input device Intel HID events (/dev/input/event4)
[ 5.691] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 5.691] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 5.691] (II) Using input driver 'libinput' for 'Intel HID events'
[ 5.691] (**) Intel HID events: always reports core events
[ 5.691] (**) Option "Device" "/dev/input/event4"
[ 5.691] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 5.691] (II) event4 - Intel HID events: device is a keyboard
[ 5.691] (II) event4 - Intel HID events: device removed
[ 5.691] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input4/event4"
[ 5.691] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[ 5.691] (**) Option "xkb_model" "pc105+inet"
[ 5.691] (**) Option "xkb_layout" "us"
[ 5.691] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.691] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 5.691] (II) event4 - Intel HID events: device is a keyboard
[ 5.691] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event5)
[ 5.691] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 5.691] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 5.691] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 5.691] (**) Intel HID 5 button array: always reports core events
[ 5.691] (**) Option "Device" "/dev/input/event5"
[ 5.692] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5.692] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 5.692] (II) event5 - Intel HID 5 button array: device removed
[ 5.692] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input5/event5"
[ 5.692] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[ 5.692] (**) Option "xkb_model" "pc105+inet"
[ 5.692] (**) Option "xkb_layout" "us"
[ 5.692] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.692] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5.692] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 5.692] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 5.692] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.692] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 5.692] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.692] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.692] (**) Option "Device" "/dev/input/event3"
[ 5.692] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.692] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.693] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 5.693] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 5.693] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 5.693] (**) Option "xkb_model" "pc105+inet"
[ 5.693] (**) Option "xkb_layout" "us"
[ 5.693] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.693] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5.693] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5.694] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 5.694] (II) No input driver specified, ignoring this device.
[ 5.694] (II) This device may have been added with another device file.
[ 5.694] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 5.694] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.694] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 5.694] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 5.694] (**) HP WMI hotkeys: always reports core events
[ 5.694] (**) Option "Device" "/dev/input/event7"
[ 5.694] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5.695] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 5.695] (II) event7 - HP WMI hotkeys: device removed
[ 5.695] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 5.695] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 5.695] (**) Option "xkb_model" "pc105+inet"
[ 5.695] (**) Option "xkb_layout" "us"
[ 5.695] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.695] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5.695] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 10.738] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 10.738] (II) modeset(0): Printing DDC gathered Modelines:
[ 10.738] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 10.738] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 148.950] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 148.950] (II) modeset(0): Printing DDC gathered Modelines:
[ 148.950] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 148.950] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 148.966] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 148.966] (II) modeset(0): Printing DDC gathered Modelines:
[ 148.966] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 148.966] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 285.702] (II) event2 - Power Button: device removed
[ 285.703] (II) event11 - Video Bus: device removed
[ 285.711] (II) event10 - Video Bus: device removed
[ 285.723] (II) event0 - Sleep Button: device removed
[ 285.723] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 285.733] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 285.749] (II) event4 - Intel HID events: device removed
[ 285.749] (II) event5 - Intel HID 5 button array: device removed
[ 285.749] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 285.749] (II) event7 - HP WMI hotkeys: device removed
[ 285.749] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 287.720] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 287.749] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 287.749] (II) modeset(0): Printing DDC gathered Modelines:
[ 287.749] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 287.749] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 287.866] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 287.866] (II) modeset(0): Printing DDC gathered Modelines:
[ 287.866] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 287.866] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 287.890] (II) NVIDIA(G0): Setting mode "NULL"
[ 287.900] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 287.900] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 287.900] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 287.900] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 287.900] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 287.900] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 287.900] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 287.900] (II) NVIDIA(G0): Config Options in the README.
[ 287.916] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 287.916] (II) event2 - Power Button: device is a keyboard
[ 287.917] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 287.917] (II) event11 - Video Bus: device is a keyboard
[ 287.918] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 287.918] (II) event10 - Video Bus: device is a keyboard
[ 287.919] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 287.919] (II) event0 - Sleep Button: device is a keyboard
[ 287.920] (II) event8 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 287.920] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 287.921] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 287.923] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 287.923] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 287.923] (II) event4 - Intel HID events: device is a keyboard
[ 287.924] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 287.924] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 287.924] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 287.924] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 287.925] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 287.925] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 292.313] (EE) event9 - ELAN076D:00 04F3:3244 Touchpad: client bug: event processing lagging behind by 374ms, your system is too slow
[ 292.313] (EE) client bug: timer event9 tap: scheduled expiry is in the past (-194ms), your system is too slow
[ 292.313] (EE) client bug: timer event9 hold: scheduled expiry is in the past (-334ms), your system is too slow
[ 292.313] (EE) client bug: timer event9 tap: scheduled expiry is in the past (-96ms), your system is too slow
[ 292.314] (II) event2 - Power Button: device removed
[ 292.314] (II) event11 - Video Bus: device removed
[ 292.322] (II) event10 - Video Bus: device removed
[ 292.338] (II) event0 - Sleep Button: device removed
[ 292.338] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 292.344] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 292.354] (II) event4 - Intel HID events: device removed
[ 292.354] (II) event5 - Intel HID 5 button array: device removed
[ 292.354] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 292.355] (II) event7 - HP WMI hotkeys: device removed
[ 292.355] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 294.309] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 294.339] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 294.339] (II) modeset(0): Printing DDC gathered Modelines:
[ 294.339] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 294.339] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 294.455] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 294.455] (II) modeset(0): Printing DDC gathered Modelines:
[ 294.455] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 294.455] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 294.480] (II) NVIDIA(G0): Setting mode "NULL"
[ 294.486] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 294.486] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 294.486] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 294.486] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 294.486] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 294.486] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 294.486] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 294.486] (II) NVIDIA(G0): Config Options in the README.
[ 294.506] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 294.506] (II) event2 - Power Button: device is a keyboard
[ 294.507] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 294.507] (II) event11 - Video Bus: device is a keyboard
[ 294.508] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 294.508] (II) event10 - Video Bus: device is a keyboard
[ 294.508] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 294.509] (II) event0 - Sleep Button: device is a keyboard
[ 294.509] (II) event8 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 294.510] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 294.511] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 294.512] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 294.513] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 294.513] (II) event4 - Intel HID events: device is a keyboard
[ 294.514] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 294.514] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 294.514] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 294.514] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 294.515] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 294.516] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 299.226] (II) event2 - Power Button: device removed
[ 299.226] (II) event11 - Video Bus: device removed
[ 299.242] (II) event10 - Video Bus: device removed
[ 299.252] (II) event0 - Sleep Button: device removed
[ 299.252] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 299.264] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 299.273] (II) event4 - Intel HID events: device removed
[ 299.273] (II) event5 - Intel HID 5 button array: device removed
[ 299.273] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 299.274] (II) event7 - HP WMI hotkeys: device removed
[ 299.274] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 301.195] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 301.214] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 301.214] (II) modeset(0): Printing DDC gathered Modelines:
[ 301.214] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 301.214] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 301.331] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 301.331] (II) modeset(0): Printing DDC gathered Modelines:
[ 301.331] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 301.331] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 301.356] (II) NVIDIA(G0): Setting mode "NULL"
[ 301.362] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 301.362] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 301.362] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 301.362] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 301.362] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 301.362] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 301.362] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 301.362] (II) NVIDIA(G0): Config Options in the README.
[ 301.381] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 301.381] (II) event2 - Power Button: device is a keyboard
[ 301.382] (II) event11 - Video Bus: is tagged by udev as: Keyboard
[ 301.382] (II) event11 - Video Bus: device is a keyboard
[ 301.383] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[ 301.383] (II) event10 - Video Bus: device is a keyboard
[ 301.384] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 301.384] (II) event0 - Sleep Button: device is a keyboard
[ 301.385] (II) event8 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 301.385] (II) event8 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 301.386] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 301.387] (II) event9 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 301.388] (II) event4 - Intel HID events: is tagged by udev as: Keyboard
[ 301.388] (II) event4 - Intel HID events: device is a keyboard
[ 301.389] (II) event5 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 301.389] (II) event5 - Intel HID 5 button array: device is a keyboard
[ 301.390] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 301.390] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 301.391] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 301.391] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 664.490] (II) config/udev: Adding input device PixArt HP 125 USB Optical Mouse (/dev/input/mouse2)
[ 664.491] (II) No input driver specified, ignoring this device.
[ 664.491] (II) This device may have been added with another device file.
[ 664.560] (II) config/udev: Adding input device PixArt HP 125 USB Optical Mouse (/dev/input/event17)
[ 664.560] (**) PixArt HP 125 USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 664.560] (II) Using input driver 'libinput' for 'PixArt HP 125 USB Optical Mouse'
[ 664.560] (**) PixArt HP 125 USB Optical Mouse: always reports core events
[ 664.560] (**) Option "Device" "/dev/input/event17"
[ 664.616] (II) event17 - PixArt HP 125 USB Optical Mouse: is tagged by udev as: Mouse
[ 664.616] (II) event17 - PixArt HP 125 USB Optical Mouse: device is a pointer
[ 664.617] (II) event17 - PixArt HP 125 USB Optical Mouse: device removed
[ 664.625] (II) libinput: PixArt HP 125 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 664.625] (II) libinput: PixArt HP 125 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 664.625] (II) libinput: PixArt HP 125 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 664.625] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:03F0:584A.0002/input/input21/event17"
[ 664.625] (II) XINPUT: Adding extended input device "PixArt HP 125 USB Optical Mouse" (type: MOUSE, id 16)
[ 664.626] (**) Option "AccelerationScheme" "none"
[ 664.626] (**) PixArt HP 125 USB Optical Mouse: (accel) selected scheme none/0
[ 664.626] (**) PixArt HP 125 USB Optical Mouse: (accel) acceleration factor: 2.000
[ 664.626] (**) PixArt HP 125 USB Optical Mouse: (accel) acceleration threshold: 4
[ 664.681] (II) event17 - PixArt HP 125 USB Optical Mouse: is tagged by udev as: Mouse
[ 664.681] (II) event17 - PixArt HP 125 USB Optical Mouse: device is a pointer
[ 1371.706] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1371.707] (II) modeset(0): Printing DDC gathered Modelines:
[ 1371.707] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1371.707] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1755.761] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1755.762] (II) modeset(0): Printing DDC gathered Modelines:
[ 1755.762] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1755.762] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1802.159] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1802.159] (II) modeset(0): Printing DDC gathered Modelines:
[ 1802.159] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1802.159] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1802.192] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1802.192] (II) modeset(0): Printing DDC gathered Modelines:
[ 1802.192] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1802.192] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1935.553] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1935.554] (II) modeset(0): Printing DDC gathered Modelines:
[ 1935.554] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1935.554] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1935.587] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1935.587] (II) modeset(0): Printing DDC gathered Modelines:
[ 1935.587] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1935.587] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1960.516] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1960.516] (II) modeset(0): Printing DDC gathered Modelines:
[ 1960.516] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1960.516] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 1960.532] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 1960.532] (II) modeset(0): Printing DDC gathered Modelines:
[ 1960.532] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 1960.532] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 2099.193] (II) modeset(0): EDID vendor "BOE", prod id 2529
[ 2099.194] (II) modeset(0): Printing DDC gathered Modelines:
[ 2099.194] (II) modeset(0): Modeline "1366x768"x0.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 2099.194] (II) modeset(0): Modeline "1366x768"x0.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
xorg.1.log file:
[ 5539.212] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 5539.212] (--) Log file renamed from "/var/log/Xorg.pid-4799.log" to "/var/log/Xorg.1.log"
[ 5539.212]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 5539.212] Current Operating System: Linux archlinux 6.10.6-2-cachyos-eevdf #1 SMP PREEMPT_DYNAMIC Wed, 21 Aug 2024 17:36:17 +0000 x86_64
[ 5539.212] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-cachyos-eevdf root=UUID=9c09fc26-1741-4be5-a588-d658664d7f18 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet xhci_hcd.quirks=270336
[ 5539.213]
[ 5539.213] Current version of pixman: 0.43.4
[ 5539.213] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5539.213] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5539.213] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Sep 3 23:10:43 2024
[ 5539.213] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5539.213] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5539.214] (==) No Layout section. Using the first Screen section.
[ 5539.214] (==) No screen section available. Using defaults.
[ 5539.214] (**) |-->Screen "Default Screen Section" (0)
[ 5539.214] (**) | |-->Monitor "<default monitor>"
[ 5539.214] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5539.214] (**) Allowing byte-swapped clients
[ 5539.214] (==) Automatically adding devices
[ 5539.214] (==) Automatically enabling devices
[ 5539.214] (==) Automatically adding GPU devices
[ 5539.214] (==) Automatically binding GPU devices
[ 5539.214] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5539.214] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5539.214] Entry deleted from font path.
[ 5539.214] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5539.214] Entry deleted from font path.
[ 5539.214] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5539.214] Entry deleted from font path.
[ 5539.214] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5539.214] Entry deleted from font path.
[ 5539.214] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5539.214] Entry deleted from font path.
[ 5539.214] (==) FontPath set to:
/usr/share/fonts/TTF
[ 5539.214] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5539.214] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5539.214] (II) Module ABI versions:
[ 5539.214] X.Org ANSI C Emulation: 0.4
[ 5539.214] X.Org Video Driver: 25.2
[ 5539.214] X.Org XInput driver : 24.4
[ 5539.214] X.Org Server Extension : 10.0
[ 5539.216] (++) using VT number 1
[ 5539.216] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5539.218] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5539.218] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 5539.219] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5539.219] (II) Platform probe for /sys/devices/pci0000:00/0000:00:06.0/0000:01:00.0/drm/card1
[ 5539.222] (--) PCI:*(0@0:2:0) 8086:4628:103c:8978 rev 12, Mem @ 0x6102000000/16777216, 0x4000000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 5539.222] (--) PCI: (1@0:0:0) 10de:25a6:103c:89a5 rev 161, Mem @ 0x81000000/16777216, 0x6000000000/4294967296, 0x6100000000/33554432, I/O @ 0x00005000/128
[ 5539.222] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5539.222] (II) LoadModule: "glx"
[ 5539.222] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5539.224] (II) Module glx: vendor="X.Org Foundation"
[ 5539.224] compiled for 1.21.1.13, module version = 1.0.0
[ 5539.224] ABI class: X.Org Server Extension, version 10.0
[ 5539.224] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 5539.224] loading driver: nvidia
[ 5539.224] (==) Matched intel as autoconfigured driver 0
[ 5539.224] (==) Matched nvidia as autoconfigured driver 1
[ 5539.224] (==) Matched nouveau as autoconfigured driver 2
[ 5539.224] (==) Matched nv as autoconfigured driver 3
[ 5539.224] (==) Matched modesetting as autoconfigured driver 4
[ 5539.224] (==) Matched fbdev as autoconfigured driver 5
[ 5539.224] (==) Matched vesa as autoconfigured driver 6
[ 5539.224] (==) Assigned the driver to the xf86ConfigLayout
[ 5539.224] (II) LoadModule: "intel"
[ 5539.225] (WW) Warning, couldn't open module intel
[ 5539.225] (EE) Failed to load module "intel" (module does not exist, 0)
[ 5539.225] (II) LoadModule: "nvidia"
[ 5539.225] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5539.226] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5539.226] compiled for 1.6.99.901, module version = 1.0.0
[ 5539.226] Module class: X.Org Video Driver
[ 5539.226] (II) LoadModule: "nouveau"
[ 5539.226] (WW) Warning, couldn't open module nouveau
[ 5539.226] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5539.226] (II) LoadModule: "nv"
[ 5539.226] (WW) Warning, couldn't open module nv
[ 5539.226] (EE) Failed to load module "nv" (module does not exist, 0)
[ 5539.226] (II) LoadModule: "modesetting"
[ 5539.226] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5539.227] (II) Module modesetting: vendor="X.Org Foundation"
[ 5539.227] compiled for 1.21.1.13, module version = 1.21.1
[ 5539.227] Module class: X.Org Video Driver
[ 5539.227] ABI class: X.Org Video Driver, version 25.2
[ 5539.227] (II) LoadModule: "fbdev"
[ 5539.227] (WW) Warning, couldn't open module fbdev
[ 5539.227] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5539.227] (II) LoadModule: "vesa"
[ 5539.227] (WW) Warning, couldn't open module vesa
[ 5539.227] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5539.227] (II) NVIDIA dlloader X Driver 550.107.02 Wed Jul 24 23:27:47 UTC 2024
[ 5539.227] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5539.227] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5539.349] (II) modeset(0): using drv /dev/dri/card0
[ 5539.349] (II) Loading sub module "fb"
[ 5539.349] (II) LoadModule: "fb"
[ 5539.349] (II) Module "fb" already built-in
[ 5539.349] (II) Loading sub module "wfb"
[ 5539.349] (II) LoadModule: "wfb"
[ 5539.349] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5539.349] (II) Module wfb: vendor="X.Org Foundation"
[ 5539.349] compiled for 1.21.1.13, module version = 1.0.0
[ 5539.349] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5539.352] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5539.352] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5539.352] (==) modeset(0): RGB weight 888
[ 5539.352] (==) modeset(0): Default visual is TrueColor
[ 5539.352] (II) Loading sub module "glamoregl"
[ 5539.352] (II) LoadModule: "glamoregl"
[ 5539.352] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5539.359] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5539.359] compiled for 1.21.1.13, module version = 1.0.1
[ 5539.359] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5539.429] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2)
[ 5539.429] (II) modeset(0): glamor initialized
[ 5539.429] (==) modeset(0): VariableRefresh: disabled
[ 5539.429] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 5539.431] (II) modeset(0): Output eDP-1 has no monitor section
[ 5539.436] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5539.436] (II) modeset(0): Output DP-1 has no monitor section
[ 5539.436] (II) modeset(0): Output DP-2 has no monitor section
[ 5539.436] (II) modeset(0): Output DP-3 has no monitor section
[ 5539.436] (II) modeset(0): Output DP-4 has no monitor section
[ 5539.438] (II) modeset(0): EDID for output eDP-1
[ 5539.438] (II) modeset(0): Manufacturer: BOE Model: 9e1 Serial#: 0
[ 5539.438] (II) modeset(0): Year: 2020 Week: 48
[ 5539.438] (II) modeset(0): EDID Version: 1.4
[ 5539.438] (II) modeset(0): Digital Display Input
[ 5539.438] (II) modeset(0): 6 bits per channel
[ 5539.438] (II) modeset(0): Digital interface is DisplayPort
[ 5539.438] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 5539.438] (II) modeset(0): Gamma: 2.20
[ 5539.438] (II) modeset(0): No DPMS capabilities specified
[ 5539.438] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 5539.438] (II) modeset(0): First detailed timing is preferred mode
[ 5539.438] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 5539.438] (II) modeset(0): Display is continuous-frequency
[ 5539.438] (II) modeset(0): redX: 0.580 redY: 0.364 greenX: 0.352 greenY: 0.573
[ 5539.438] (II) modeset(0): blueX: 0.163 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 5539.438] (II) modeset(0): Manufacturer's mask: 0
[ 5539.438] (II) modeset(0): Supported detailed timing:
[ 5539.438] (II) modeset(0): clock: 75.2 MHz Image Size: 344 x 194 mm
[ 5539.438] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1574 h_border: 0
[ 5539.438] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 796 v_border: 0
[ 5539.438] (II) modeset(0): Supported detailed timing:
[ 5539.438] (II) modeset(0): clock: 50.1 MHz Image Size: 344 x 194 mm
[ 5539.438] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1574 h_border: 0
[ 5539.438] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 796 v_border: 0
[ 5539.438] (II) modeset(0): Unknown vendor-specific block 2
[ 5539.438] (II) modeset(0): EDID (in hex):
[ 5539.438] (II) modeset(0): 00ffffffffffff0009e5e10900000000
[ 5539.438] (II) modeset(0): 301e0104952213780393f5945d5a9229
[ 5539.438] (II) modeset(0): 1f505400000001010101010101010101
[ 5539.438] (II) modeset(0): 0101010101015e1d56d050001c303020
[ 5539.438] (II) modeset(0): 360058c21000001a941356d050001c30
[ 5539.438] (II) modeset(0): 3020360058c21000001a000000000000
[ 5539.438] (II) modeset(0): 00000000000000000000000000000002
[ 5539.438] (II) modeset(0): 000d40ff0a3c7d11101f7d000000002d
[ 5539.438] (II) modeset(0): Printing probed modes for output eDP-1
[ 5539.438] (II) modeset(0): Modeline "1366x768"x60.0 75.18 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (47.8 kHz eP)
[ 5539.438] (II) modeset(0): Modeline "1366x768"x40.0 50.12 1366 1414 1446 1574 768 771 777 796 +hsync -vsync (31.8 kHz e)
[ 5539.438] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 5539.438] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 5539.438] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 5539.438] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 5539.438] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 5539.438] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 5539.438] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 5539.438] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 5539.438] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 5539.438] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 5539.438] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 5539.438] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 5539.438] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 5539.438] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 5539.438] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 5539.438] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 5539.438] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 5539.438] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 5539.438] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 5539.443] (II) modeset(0): EDID for output HDMI-1
[ 5539.443] (II) modeset(0): EDID for output DP-1
[ 5539.443] (II) modeset(0): EDID for output DP-2
[ 5539.443] (II) modeset(0): EDID for output DP-3
[ 5539.443] (II) modeset(0): EDID for output DP-4
[ 5539.443] (II) modeset(0): Output eDP-1 connected
[ 5539.443] (II) modeset(0): Output HDMI-1 disconnected
[ 5539.443] (II) modeset(0): Output DP-1 disconnected
[ 5539.443] (II) modeset(0): Output DP-2 disconnected
[ 5539.443] (II) modeset(0): Output DP-3 disconnected
[ 5539.443] (II) modeset(0): Output DP-4 disconnected
[ 5539.443] (II) modeset(0): Using exact sizes for initial modes
[ 5539.443] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 5539.443] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5539.443] (==) modeset(0): DPI set to (96, 96)
[ 5539.443] (II) Loading sub module "fb"
[ 5539.443] (II) LoadModule: "fb"
[ 5539.443] (II) Module "fb" already built-in
[ 5539.443] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 5539.443] (==) NVIDIA(G0): RGB weight 888
[ 5539.443] (==) NVIDIA(G0): Default visual is TrueColor
[ 5539.443] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 5539.443] (**) NVIDIA(G0): Enabling 2D acceleration
[ 5539.443] (II) Loading sub module "glxserver_nvidia"
[ 5539.443] (II) LoadModule: "glxserver_nvidia"
[ 5539.443] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so
[ 5539.462] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 5539.462] compiled for 1.6.99.901, module version = 1.0.0
[ 5539.462] Module class: X.Org Server Extension
[ 5539.462] (II) NVIDIA GLX Module 550.107.02 Wed Jul 24 23:31:40 UTC 2024
[ 5539.462] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 5539.464] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce MX570 (GA107-A) at PCI:1:0:0
[ 5539.464] (II) NVIDIA(G0): (GPU-0)
[ 5539.464] (--) NVIDIA(G0): Memory: 2097152 kBytes
[ 5539.464] (--) NVIDIA(G0): VideoBIOS: 94.07.5f.00.7c
[ 5539.464] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 5539.464] (II) NVIDIA(G0): Validated MetaModes:
[ 5539.464] (II) NVIDIA(G0): "NULL"
[ 5539.464] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 5539.464] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 5539.464] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 5539.475] (==) modeset(0): Backing store enabled
[ 5539.475] (==) modeset(0): Silken mouse enabled
[ 5539.547] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5539.547] (==) modeset(0): DPMS enabled
[ 5539.547] (II) modeset(0): [DRI2] Setup complete
[ 5539.547] (II) modeset(0): [DRI2] DRI driver: iris
[ 5539.547] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5539.548] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 5539.548] (II) NVIDIA: access.
[ 5539.570] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 5539.570] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 5539.570] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 5539.570] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 5539.570] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 5539.570] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 5539.570] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 5539.570] (II) NVIDIA(G0): Config Options in the README.
[ 5539.604] (II) NVIDIA(G0): Setting mode "NULL"
[ 5539.611] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 5539.611] (==) NVIDIA(G0): Backing store enabled
[ 5539.611] (==) NVIDIA(G0): Silken mouse enabled
[ 5539.612] (==) NVIDIA(G0): DPMS enabled
[ 5539.612] (II) Loading sub module "dri2"
[ 5539.612] (II) LoadModule: "dri2"
[ 5539.612] (II) Module "dri2" already built-in
[ 5539.612] (II) NVIDIA(G0): [DRI2] Setup complete
[ 5539.612] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 5539.612] (II) Initializing extension Generic Event Extension
[ 5539.612] (II) Initializing extension SHAPE
[ 5539.612] (II) Initializing extension MIT-SHM
[ 5539.612] (II) Initializing extension XInputExtension
[ 5539.612] (II) Initializing extension XTEST
[ 5539.612] (II) Initializing extension BIG-REQUESTS
[ 5539.612] (II) Initializing extension SYNC
[ 5539.612] (II) Initializing extension XKEYBOARD
[ 5539.612] (II) Initializing extension XC-MISC
[ 5539.613] (II) Initializing extension SECURITY
[ 5539.613] (II) Initializing extension XFIXES
[ 5539.613] (II) Initializing extension RENDER
[ 5539.613] (II) Initializing extension RANDR
[ 5539.613] (II) Initializing extension COMPOSITE
[ 5539.613] (II) Initializing extension DAMAGE
[ 5539.613] (II) Initializing extension MIT-SCREEN-SAVER
[ 5539.613] (II) Initializing extension DOUBLE-BUFFER
[ 5539.613] (II) Initializing extension RECORD
[ 5539.613] (II) Initializing extension DPMS
[ 5539.613] (II) Initializing extension Present
[ 5539.614] (II) Initializing extension DRI3
[ 5539.614] (II) Initializing extension X-Resource
[ 5539.614] (II) Initializing extension XVideo
[ 5539.614] (II) Initializing extension XVideo-MotionCompensation
[ 5539.614] (II) Initializing extension GLX
[ 5539.614] (II) Initializing extension GLX
[ 5539.614] (II) Indirect GLX disabled.
[ 5539.619] (II) AIGLX: Loaded and initialized iris
[ 5539.620] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5539.620] (II) Initializing extension XFree86-VidModeExtension
[ 5539.620] (II) Initializing extension XFree86-DGA
[ 5539.620] (II) Initializing extension XFree86-DRI
[ 5539.620] (II) Initializing extension DRI2
[ 5539.620] (II) Initializing extension NV-GLX
[ 5539.620] (II) Initializing extension NV-CONTROL
[ 5539.621] (II) modeset(0): Damage tracking initialized
[ 5539.621] (II) modeset(0): Setting screen physical size to 361 x 203
[ 5539.664] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5539.664] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5539.664] (**) Power Button: Applying InputClass "system-keyboard"
[ 5539.664] (II) LoadModule: "libinput"
[ 5539.664] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5539.665] (II) Module libinput: vendor="X.Org Foundation"
[ 5539.665] compiled for 1.21.1.13, module version = 1.4.0
[ 5539.665] Module class: X.Org XInput Driver
[ 5539.665] ABI class: X.Org XInput driver, version 24.4
[ 5539.665] (II) Using input driver 'libinput' for 'Power Button'
[ 5539.665] (**) Power Button: always reports core events
[ 5539.665] (**) Option "Device" "/dev/input/event2"
[ 5539.668] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5539.668] (II) event2 - Power Button: device is a keyboard
[ 5539.668] (II) event2 - Power Button: device removed
[ 5539.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 5539.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5539.668] (**) Option "xkb_model" "pc105+inet"
[ 5539.668] (**) Option "xkb_layout" "us"
[ 5539.668] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.692] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 5539.692] (II) event2 - Power Button: device is a keyboard
[ 5539.692] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 5539.692] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5539.692] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5539.692] (II) Using input driver 'libinput' for 'Video Bus'
[ 5539.692] (**) Video Bus: always reports core events
[ 5539.692] (**) Option "Device" "/dev/input/event5"
[ 5539.693] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 5539.693] (II) event5 - Video Bus: device is a keyboard
[ 5539.693] (II) event5 - Video Bus: device removed
[ 5539.715] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 5539.715] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5539.715] (**) Option "xkb_model" "pc105+inet"
[ 5539.715] (**) Option "xkb_layout" "us"
[ 5539.715] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.715] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 5539.715] (II) event5 - Video Bus: device is a keyboard
[ 5539.716] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 5539.716] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5539.716] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5539.716] (II) Using input driver 'libinput' for 'Video Bus'
[ 5539.716] (**) Video Bus: always reports core events
[ 5539.716] (**) Option "Device" "/dev/input/event4"
[ 5539.716] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 5539.717] (II) event4 - Video Bus: device is a keyboard
[ 5539.717] (II) event4 - Video Bus: device removed
[ 5539.737] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[ 5539.737] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 5539.737] (**) Option "xkb_model" "pc105+inet"
[ 5539.737] (**) Option "xkb_layout" "us"
[ 5539.737] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.737] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 5539.737] (II) event4 - Video Bus: device is a keyboard
[ 5539.738] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 5539.738] (II) No input driver specified, ignoring this device.
[ 5539.738] (II) This device may have been added with another device file.
[ 5539.738] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 5539.738] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 5539.738] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 5539.738] (II) Using input driver 'libinput' for 'Sleep Button'
[ 5539.738] (**) Sleep Button: always reports core events
[ 5539.738] (**) Option "Device" "/dev/input/event0"
[ 5539.738] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5539.738] (II) event0 - Sleep Button: device is a keyboard
[ 5539.739] (II) event0 - Sleep Button: device removed
[ 5539.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 5539.739] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5539.739] (**) Option "xkb_model" "pc105+inet"
[ 5539.739] (**) Option "xkb_layout" "us"
[ 5539.739] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.739] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 5539.739] (II) event0 - Sleep Button: device is a keyboard
[ 5539.740] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Mouse (/dev/input/event11)
[ 5539.740] (**) ELAN076D:00 04F3:3244 Mouse: Applying InputClass "libinput pointer catchall"
[ 5539.740] (II) Using input driver 'libinput' for 'ELAN076D:00 04F3:3244 Mouse'
[ 5539.740] (**) ELAN076D:00 04F3:3244 Mouse: always reports core events
[ 5539.740] (**) Option "Device" "/dev/input/event11"
[ 5539.741] (II) event11 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5539.741] (II) event11 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 5539.741] (II) event11 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 5539.759] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.759] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.759] (II) libinput: ELAN076D:00 04F3:3244 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.759] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-15/i2c-ELAN076D:00/0018:04F3:3244.0002/input/input14/event11"
[ 5539.759] (II) XINPUT: Adding extended input device "ELAN076D:00 04F3:3244 Mouse" (type: MOUSE, id 10)
[ 5539.759] (**) Option "AccelerationScheme" "none"
[ 5539.759] (**) ELAN076D:00 04F3:3244 Mouse: (accel) selected scheme none/0
[ 5539.759] (**) ELAN076D:00 04F3:3244 Mouse: (accel) acceleration factor: 2.000
[ 5539.759] (**) ELAN076D:00 04F3:3244 Mouse: (accel) acceleration threshold: 4
[ 5539.759] (II) event11 - ELAN076D:00 04F3:3244 Mouse: is tagged by udev as: Mouse Pointingstick
[ 5539.760] (II) event11 - ELAN076D:00 04F3:3244 Mouse: device is a pointer
[ 5539.760] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Mouse (/dev/input/mouse1)
[ 5539.760] (II) No input driver specified, ignoring this device.
[ 5539.760] (II) This device may have been added with another device file.
[ 5539.761] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Touchpad (/dev/input/event12)
[ 5539.761] (**) ELAN076D:00 04F3:3244 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5539.761] (II) Using input driver 'libinput' for 'ELAN076D:00 04F3:3244 Touchpad'
[ 5539.761] (**) ELAN076D:00 04F3:3244 Touchpad: always reports core events
[ 5539.761] (**) Option "Device" "/dev/input/event12"
[ 5539.762] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 5539.763] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 5539.763] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 5539.784] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.784] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.784] (II) libinput: ELAN076D:00 04F3:3244 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5539.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-15/i2c-ELAN076D:00/0018:04F3:3244.0002/input/input16/event12"
[ 5539.784] (II) XINPUT: Adding extended input device "ELAN076D:00 04F3:3244 Touchpad" (type: TOUCHPAD, id 11)
[ 5539.785] (**) Option "AccelerationScheme" "none"
[ 5539.785] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) selected scheme none/0
[ 5539.785] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) acceleration factor: 2.000
[ 5539.785] (**) ELAN076D:00 04F3:3244 Touchpad: (accel) acceleration threshold: 4
[ 5539.786] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: is tagged by udev as: Touchpad
[ 5539.787] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: device is a touchpad
[ 5539.788] (II) config/udev: Adding input device ELAN076D:00 04F3:3244 Touchpad (/dev/input/mouse2)
[ 5539.788] (II) No input driver specified, ignoring this device.
[ 5539.788] (II) This device may have been added with another device file.
[ 5539.788] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event13)
[ 5539.788] (II) No input driver specified, ignoring this device.
[ 5539.788] (II) This device may have been added with another device file.
[ 5539.788] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event14)
[ 5539.788] (II) No input driver specified, ignoring this device.
[ 5539.788] (II) This device may have been added with another device file.
[ 5539.788] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event15)
[ 5539.788] (II) No input driver specified, ignoring this device.
[ 5539.788] (II) This device may have been added with another device file.
[ 5539.789] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event16)
[ 5539.789] (II) No input driver specified, ignoring this device.
[ 5539.789] (II) This device may have been added with another device file.
[ 5539.789] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event17)
[ 5539.789] (II) No input driver specified, ignoring this device.
[ 5539.789] (II) This device may have been added with another device file.
[ 5539.789] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[ 5539.789] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 5539.789] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 5539.789] (II) Using input driver 'libinput' for 'Intel HID events'
[ 5539.789] (**) Intel HID events: always reports core events
[ 5539.789] (**) Option "Device" "/dev/input/event7"
[ 5539.790] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 5539.790] (II) event7 - Intel HID events: device is a keyboard
[ 5539.790] (II) event7 - Intel HID events: device removed
[ 5539.790] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input7/event7"
[ 5539.790] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 12)
[ 5539.790] (**) Option "xkb_model" "pc105+inet"
[ 5539.790] (**) Option "xkb_layout" "us"
[ 5539.790] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.790] (II) event7 - Intel HID events: is tagged by udev as: Keyboard
[ 5539.790] (II) event7 - Intel HID events: device is a keyboard
[ 5539.791] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event8)
[ 5539.791] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 5539.791] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 5539.791] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 5539.791] (**) Intel HID 5 button array: always reports core events
[ 5539.791] (**) Option "Device" "/dev/input/event8"
[ 5539.791] (II) event8 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5539.791] (II) event8 - Intel HID 5 button array: device is a keyboard
[ 5539.791] (II) event8 - Intel HID 5 button array: device removed
[ 5539.791] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input8/event8"
[ 5539.791] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 13)
[ 5539.791] (**) Option "xkb_model" "pc105+inet"
[ 5539.791] (**) Option "xkb_layout" "us"
[ 5539.791] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.792] (II) event8 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 5539.792] (II) event8 - Intel HID 5 button array: device is a keyboard
[ 5539.792] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 5539.792] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5539.792] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 5539.792] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5539.792] (**) AT Translated Set 2 keyboard: always reports core events
[ 5539.792] (**) Option "Device" "/dev/input/event3"
[ 5539.793] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5539.793] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5539.794] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 5539.794] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 5539.794] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 5539.794] (**) Option "xkb_model" "pc105+inet"
[ 5539.794] (**) Option "xkb_layout" "us"
[ 5539.794] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.794] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 5539.794] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 5539.795] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 5539.795] (II) No input driver specified, ignoring this device.
[ 5539.795] (II) This device may have been added with another device file.
[ 5539.797] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10)
[ 5539.797] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5539.797] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 5539.797] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 5539.797] (**) HP WMI hotkeys: always reports core events
[ 5539.797] (**) Option "Device" "/dev/input/event10"
[ 5539.797] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5539.797] (II) event10 - HP WMI hotkeys: device is a keyboard
[ 5539.798] (II) event10 - HP WMI hotkeys: device removed
[ 5539.798] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event10"
[ 5539.798] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 5539.798] (**) Option "xkb_model" "pc105+inet"
[ 5539.798] (**) Option "xkb_layout" "us"
[ 5539.798] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5539.798] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5539.798] (II) event10 - HP WMI hotkeys: device is a keyboard
[ 5545.580] (II) event2 - Power Button: device removed
[ 5545.580] (II) event5 - Video Bus: device removed
[ 5545.601] (II) event4 - Video Bus: device removed
[ 5545.606] (II) event0 - Sleep Button: device removed
[ 5545.606] (II) event11 - ELAN076D:00 04F3:3244 Mouse: device removed
[ 5545.616] (II) event12 - ELAN076D:00 04F3:3244 Touchpad: device removed
[ 5545.626] (II) event7 - Intel HID events: device removed
[ 5545.626] (II) event8 - Intel HID 5 button array: device removed
[ 5545.626] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 5545.626] (II) event10 - HP WMI hotkeys: device removed
[ 5545.626] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.576] (II) UnloadModule: "libinput"
[ 5550.590] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 5550.593] (II) Server terminated successfully (0). Closing log file.
prime-run glxinfo -B output:
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Memory info (GL_NVX_gpu_memory_info):
Dedicated video memory: 2048 MB
Total available memory: 2048 MB
Currently available dedicated video memory: 1850 MB
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: NVIDIA GeForce MX570/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 550.107.02
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6.0 NVIDIA 550.107.02
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 550.107.02
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
Last edited by a04173c4 (2024-09-15 06:58:41)
Offline
xorg.0.log looks like a optimus manager (there's an explicitly config) "hybrid" configuration (there may be a stale config file¹) but is functionally equivalent to the regular prime setup and unsuspicious.
You do not need any tool to control the GPUs - you've an ampere chip and at least w/ the non-open drivers it'll default to https://wiki.archlinux.org/title/PRIME# … Management
prime-run properly invokes the nvidia chip, the .1.log is just dated and irrelevant.
Are you running gnome on X11?
We still lack a relevant top illustrating the CPU load, but just to be clear: superturboturkeypuncher³ doesn't run on no CPU…
¹
grep -ri integrated /{etc,usr/share}/X11/xorg.conf*
Offline
xorg.0.log looks like a optimus manager (there's an explicitly config) "hybrid" configuration (there may be a stale config file¹) but is functionally equivalent to the regular prime setup and unsuspicious.
You do not need any tool to control the GPUs - you've an ampere chip and at least w/ the non-open drivers it'll default to https://wiki.archlinux.org/title/PRIME# … Managementprime-run properly invokes the nvidia chip, the .1.log is just dated and irrelevant.
Are you running gnome on X11?
We still lack a relevant top illustrating the CPU load, but just to be clear: superturboturkeypuncher³ doesn't run on no CPU…¹
grep -ri integrated /{etc,usr/share}/X11/xorg.conf*
According to if I am running X11 or not. when I was using KDE, I used X11. But now, I'm using GNOME Classic on Xorg. I don't know if I still use X11 with my gnome.
I'm not using superturboturkeypuncher. I'm using ori and the will of the wisps
grep -ri integrated /{etc,usr/share}/X11/xorg.conf* output:
/etc/X11/xorg.conf.d/10-optimus-manager.conf: Screen 0 "integrated"
/etc/X11/xorg.conf.d/10-optimus-manager.conf: Identifier "integrated"
/etc/X11/xorg.conf.d/10-optimus-manager.conf: Identifier "integrated"
/etc/X11/xorg.conf.d/10-optimus-manager.conf: Device "integrated"
cat /sys/class/drm/card*/device/power_state output:
D0
D3cold
Last edited by a04173c4 (2024-09-15 07:37:15)
Offline
We still lack a relevant top illustrating the CPU load
You can also check nvidia-smi to make sure the game runs on that chip.
I've no idea what "ori" is but if it runs on vulkan (directly or via proton) you might have to set "VK_DRIVER_FILES=/usr/share/vulkan/icd.d/nvidia_icd.json", https://wiki.archlinux.org/title/Vulkan … initialize
Offline
We still lack a relevant top illustrating the CPU load
You can also check nvidia-smi to make sure the game runs on that chip.
I've no idea what "ori" is but if it runs on vulkan (directly or via proton) you might have to set "VK_DRIVER_FILES=/usr/share/vulkan/icd.d/nvidia_icd.json", https://wiki.archlinux.org/title/Vulkan … initialize
Thanks a lot, Seth. You helped me a lot. Game [ori and the will of the wisps] now working well with tiny LAGs that don't effect gaming experience. but cpu usage still become crazy. I forgot to tell you that CPU usage becomes more than 500%+ on top and nvtop commands [system monitoring], but on mangohud looks good between 0~100% normally. I'm afraid to cause damage to CPU be over usage but at the same time maybe top and nvtop can't read proton or wine - because it simulate windows - correctly so it gives wrong numbers. I want to finish this issue to set title to SOLVED and let others build safe gaming environment.
Offline
The 500% means that you're fully utilizing 5 cores - the only interesting question is "with what processes" and the most likely answer is going to be "your game".
As long as the CPU isn't overheating (at which point it'll first throttle and then power down) and you don't end up rendering in software that's not a problem.
Do you have similarily high CPU load w/o mangohud?
Offline
The 500% means that you're fully utilizing 5 cores - the only interesting question is "with what processes" and the most likely answer is going to be "your game".
As long as the CPU isn't overheating (at which point it'll first throttle and then power down) and you don't end up rendering in software that's not a problem.
Do you have similarily high CPU load w/o mangohud?
Thanks for replying, Seth.
Wonderful! I didn't think that 100% reference to single core at all. Maybe your answers is correct.
When I use heroic only (all games). I will try to run simple windows application using heroic WINE-GE-LATEST and see the result. I will monitor top continuously to collect correct information.
I will try heavy gpu application or game that runs natively on linux.
Also, I will use watch command for cpu info tool to monitor CPU temperature.
How to know that I don't use software rendering to make sure I'm in safe side.
Offline
How to know that I don't use software rendering to make sure I'm in safe side.
nvidia-smi shows the game process using the GPU
Offline
How to know that I don't use software rendering to make sure I'm in safe side.
nvidia-smi shows the game process using the GPU
I have added __NV_PRIME_RENDER_OFFLOAD=1, __GLX_VENDOR_LIBRARY_NAME=nvidia, VK_DRIVER_FILES=/usr/share/vulkan/icd.d/nvidia_icd.json on Environment Variables to Heroic game Settings => Advanced Tab. I have setup https://github.com/doitsujin/dxvk/releases on system32 and syswow64 at drive_c on PREFIX directory for improving directx dll files.
Also, I have created dxvk.conf on prefix game directory for each game:
dxvk.enableAsync = true
dxvk.numCompilerThreads = 4 # Adjust based on your CPU cores
dxvk.enableImageStorage = false
dxvk.hud = compiler
Most games works fine. Others maybe not working good on proton or wine or have issues for themselves.
According to cpu becomes more than 100% because - as Seth said - some monitoring tools monitor single core as 100%. if application uses more than one core, then cpu usage becomes more than 100%. I have test this using mangohud and build-in graphical system monitor that display 0~100% normally while nvtop and top commands display more than 300%.
Thanks Seth to help me built good gaming environment and help me to understand some concepts that I don't know about them.
Edited: I also unchecked Fsync option on heroic game settings and added PROTON_NO_FSYNC=1 on environment variables to make sure Fsync is disabled. The result is very good that games didn't use high cpu usage.
Last edited by a04173c4 (2024-09-16 10:21:51)
Offline
\o/
I guess this means and in case please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
Edit: F555
Last edited by seth (2024-09-16 17:01:15)
Offline