You are not logged in.

Pages: 1

#1 2024-10-09 16:19:18

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

[SOLVED] External screen freezes when opening nautilus

Hi,

after a system update i notice that when i open nautilus (i'm running gnome 47.0.1) and i have a second screen connected to the hdmi port (i have a dedicated graphic card nvidia 4070 on a laptop) the external monitor freezes completely and i have to disconnect the hdmi or disable it by the settings panel to make it work again.
I'v tried checking the logs with journalctl, but these are the only logs that i'm getting:

ott 09 18:12:09 5i-Andrea gnome-shell[1591]: No listeners 182
ott 09 18:12:09 5i-Andrea firefox.desktop[6538]: (as)
ott 09 18:12:09 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.Calculator.SearchProvider@24.service.
ott 09 18:12:09 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.Nautilus@12.service.
ott 09 18:12:09 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.Settings.SearchProvider@16.service.
ott 09 18:12:09 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.seahorse.Application@65.service.
ott 09 18:12:09 5i-Andrea nautilus[19819]: Connecting to org.freedesktop.Tracker3.Miner.Files
ott 09 18:12:09 5i-Andrea nautilus[19819]: Unknown key gtk-modules in /home/andrea/.config/gtk-4.0/settings.ini
ott 09 18:12:09 5i-Andrea seahorse[19821]: Using GtkSettings:gtk-application-prefer-dark-theme together with HdyStyleManager is unsupported. Please use HdyStyleManager:color-scheme instead.
ott 09 18:12:09 5i-Andrea nautilus[19819]: Using GtkSettings:gtk-application-prefer-dark-theme with libadwaita is unsupported. Please use AdwStyleManager:color-scheme instead.
ott 09 18:12:09 5i-Andrea gnome-control-c[19820]: Unknown key gtk-modules in /home/andrea/.config/gtk-4.0/settings.ini
ott 09 18:12:09 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.NautilusPreviewer@14.service.
ott 09 18:12:10 5i-Andrea firefox.desktop[6538]: (asas)
ott 09 18:12:10 5i-Andrea systemd[1455]: Started dbus-:1.2-org.gnome.seahorse.Application@66.service.
ott 09 18:12:10 5i-Andrea seahorse[19893]: Using GtkSettings:gtk-application-prefer-dark-theme together with HdyStyleManager is unsupported. Please use HdyStyleManager:color-scheme instead.
ott 09 18:12:11 5i-Andrea gnome-shell[1591]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x5600004 (Caricamento…)
ott 09 18:12:11 5i-Andrea systemd[1]: Starting Hostname Service...
ott 09 18:12:11 5i-Andrea systemd[1]: Started Hostname Service.
ott 09 18:12:13 5i-Andrea /usr/lib/gdm-x-session[1494]: (II) event13 - Compx 2.4G Wireless Receiver: SYN_DROPPED event - some input events have been lost.

Thanks in advance for any help!

Last edited by Rambo-IT (2024-10-17 08:00:58)

Offline

#2 2024-10-09 20:22:42

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

"sudo journalctl -b", unless you're member of some admin groups, unprivileged users only get to see their session journal.
Also please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

Is this strictly limited to nautilus? No other client causes this?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2024-10-09 20:50:09

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

journal logs

yes, for what i experienced it happends only with nautilus.
It happends every time i launch it, and then if i reconnect the monitor (with nautilus still opened) everything is ok, but after a variable amount of time the monitor freezes again.

Last edited by Rambo-IT (2024-10-09 20:57:05)

Offline

#4 2024-10-09 20:58:46

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

Sorry, wrong xorg logs, here are the actual one xorg logs

Offline

#5 2024-10-09 20:59:31

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

Because it's like top-posting.
Why not?
Please don't use -r with journalctl.

[     7.762] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  3 14:53:01 2024

The Xorg log is severely dated.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2024-10-09 21:04:07

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

Cross talk smile

[ 10278.056] (**) |-->Inactive Device "nvidia"

Remove (I guess) optimus-manager and residual configs¹ and run the system in regular prime fashion.
Still an issue?

¹

grep integrated /{etc,usr/share}/X11/xorg.conf*

Edit:
If

[ 10278.502] (WW) NVIDIA(G0): Cannot find size of first mode for Acer KG221Q (DFP-4); cannot
[ 10278.502] (WW) NVIDIA(G0):     compute DPI from Acer KG221Q (DFP-4)'s EDID.

remains afterwards, please post the output of 

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://aur.archlinux.org/packages/edid-decode-git

Another thing is 

ott 09 22:26:12 5i-Andrea systemd[1]: Started Hostname Service.
ott 09 22:26:12 5i-Andrea systemd[1]: Starting Hostname Service...

and you've a hostname w/ a leading digit, what's legal but iirc systemd used to take issue w/ that and X11 is hostname sensitive…
I can't explain the symptoms out of that, but  the coincidence smells fishy, so maybe try "Si-Andrea"…

Last edited by seth (2024-10-09 21:21:35)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2024-10-12 07:45:08

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

Sorry for the delayed answer

seth wrote:

The Xorg log is severely dated.

i have posted another link with a newer logs

Rambo-IT wrote:

Sorry, wrong xorg logs, here are the actual one xorg logs

After removing optimus-manger the integrated screen stopped working and is no longer detected.

the output of 

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done
/sys/class/drm/card0
/sys/class/drm/card0/edid: No such file or directory
=================
/sys/class/drm/card0-eDP-1
edid-decode (hex):

00 ff ff ff ff ff ff 00 06 af a5 c1 a5 c1 00 00
1c 20 01 04 b5 22 16 78 03 ca 35 a6 55 49 99 25
10 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 78 6e 00 a0 a0 40 84 60 30 20
aa 00 58 d7 10 00 00 18 00 00 00 fd 0c 30 a5 1f
1f 4e 01 0a 20 20 20 20 20 20 00 00 00 fe 00 41
55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 42 31 36 30 51 41 4e 30 33 2e 4c 20 0a 01 7b

70 13 79 00 00 03 01 14 b6 2f 01 84 ff 09 9f 00
2f 00 1f 00 3f 06 83 00 09 00 09 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 23 90

----------------

Block 0, Base EDID:
  EDID Structure Version & Revision: 1.4
  Vendor & Product Identification:
    Manufacturer: AUO
    Model: 49573
    Serial Number: 49573
    Made in: week 28 of 2022
  Basic Display Parameters & Features:
    Digital display
    Bits per primary color channel: 10
    DisplayPort interface
    Maximum image size: 34 cm x 22 cm
    Gamma: 2.20
    Supported color formats: RGB 4:4:4
    First detailed timing includes the native pixel format and preferred refresh rate
    Display is continuous frequency
  Color Characteristics:
    Red  : 0.6513, 0.3320
    Green: 0.2871, 0.5996
    Blue : 0.1445, 0.0654
    White: 0.3134, 0.3291
  Established Timings I & II: none
  Standard Timings: none
  Detailed Timing Descriptors:
    DTD 1:  2560x1600   60.029208 Hz  16:10   103.971 kHz    282.800000 MHz (344 mm x 215 mm)
                 Hfront   48 Hsync  32 Hback   80 Hpol N
                 Vfront   10 Vsync  10 Vback  112 Vpol N
    Display Range Limits:
      Monitor ranges (Bare Limits): 48-165 Hz V, 286-286 kHz H, max dotclock 780 MHz
    Alphanumeric Data String: 'AUO'
    Alphanumeric Data String: 'B160QAN03.L '
  Extension blocks: 1
Checksum: 0x7b

----------------

Block 1, DisplayID Extension Block:
  Version: 1.3
  Extension Count: 0
  Display Product Type: Extension Section
  Video Timing Modes Type 1 - Detailed Timings Data Block:
    DTD:  2560x1600  165.039991 Hz  16:9    285.849 kHz    777.510000 MHz (aspect 16:9, no 3D stereo, preferred)
               Hfront   48 Hsync  32 Hback   80 Hpol N
               Vfront   10 Vsync  10 Vback  112 Vpol N
  Checksum: 0x23
Checksum: 0x90
=================
/sys/class/drm/card1
/sys/class/drm/card1/edid: No such file or directory
=================
/sys/class/drm/card1-DP-1
EDID of '/sys/class/drm/card1-DP-1/edid' was empty.
=================
/sys/class/drm/card1-DP-2
EDID of '/sys/class/drm/card1-DP-2/edid' was empty.
=================
/sys/class/drm/card1-eDP-2
EDID of '/sys/class/drm/card1-eDP-2/edid' was empty.
=================
/sys/class/drm/card1-HDMI-A-1
edid-decode (hex):

00 ff ff ff ff ff ff 00 04 72 8e 05 6a 90 30 81
0d 1c 01 03 80 30 1b 78 2a e1 e5 a6 55 51 a0 27
13 50 54 b3 0c 00 d1 c0 b3 00 95 00 81 80 81 00
81 c0 71 4f 01 01 68 42 80 6a 70 38 27 40 08 20
98 04 dd 0c 11 00 00 1e 02 3a 80 18 71 38 2d 40
58 2c 45 00 dd 0c 11 00 00 1e 00 00 00 fd 00 30
4b 1e 53 11 00 0a 20 20 20 20 20 20 00 00 00 fc
00 41 63 65 72 20 4b 47 32 32 31 51 0a 20 01 c3

02 03 27 f1 4b 90 02 03 04 11 12 13 05 14 1f 01
23 09 07 01 83 01 00 00 65 03 0c 00 10 00 68 1a
00 00 01 01 30 4b e6 02 3a 80 18 71 38 2d 40 58
2c 45 00 dd 0c 11 00 00 1e 8c 0a d0 8a 20 e0 2d
10 10 3e 96 00 dd 0c 11 00 00 18 01 1d 00 72 51
d0 1e 20 6e 28 55 00 dd 0c 11 00 00 1e 8c 0a d0
90 20 40 31 20 0c 40 55 00 dd 0c 11 00 00 18 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 35

----------------

Block 0, Base EDID:
  EDID Structure Version & Revision: 1.3
  Vendor & Product Identification:
    Manufacturer: ACR
    Model: 1422
    Serial Number: 2167443562
    Made in: week 13 of 2018
  Basic Display Parameters & Features:
    Digital display
    Maximum image size: 48 cm x 27 cm
    Gamma: 2.20
    DPMS levels: Off
    RGB color display
    First detailed timing is the preferred timing
  Color Characteristics:
    Red  : 0.6513, 0.3339
    Green: 0.3164, 0.6259
    Blue : 0.1552, 0.0761
    White: 0.3134, 0.3291
  Established Timings I & II:
    IBM     :   720x400    70.081663 Hz   9:5     31.467 kHz     28.320000 MHz
    DMT 0x04:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
    Apple   :   640x480    66.666667 Hz   4:3     35.000 kHz     30.240000 MHz
    DMT 0x08:   800x600    56.250000 Hz   4:3     35.156 kHz     36.000000 MHz
    DMT 0x09:   800x600    60.316541 Hz   4:3     37.879 kHz     40.000000 MHz
    DMT 0x10:  1024x768    60.003840 Hz   4:3     48.363 kHz     65.000000 MHz
    DMT 0x11:  1024x768    70.069359 Hz   4:3     56.476 kHz     75.000000 MHz
  Standard Timings:
    DMT 0x52:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz
    DMT 0x3a:  1680x1050   59.954250 Hz  16:10    65.290 kHz    146.250000 MHz
    DMT 0x2f:  1440x900    59.887445 Hz  16:10    55.935 kHz    106.500000 MHz
    DMT 0x23:  1280x1024   60.019740 Hz   5:4     63.981 kHz    108.000000 MHz
    DMT 0x1c:  1280x800    59.810326 Hz  16:10    49.702 kHz     83.500000 MHz
    DMT 0x55:  1280x720    60.000000 Hz  16:9     45.000 kHz     74.250000 MHz
    DMT 0x15:  1152x864    75.000000 Hz   4:3     67.500 kHz    108.000000 MHz
  Detailed Timing Descriptors:
    DTD 1:  1920x1080   74.985863 Hz  16:9     83.909 kHz    170.000000 MHz (477 mm x 268 mm)
                 Hfront    8 Hsync  32 Hback   66 Hpol P
                 Vfront   25 Vsync   8 Vback    6 Vpol P
    DTD 2:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (477 mm x 268 mm)
                 Hfront   88 Hsync  44 Hback  148 Hpol P
                 Vfront    4 Vsync   5 Vback   36 Vpol P
    Display Range Limits:
      Monitor ranges (GTF): 48-75 Hz V, 30-83 kHz H, max dotclock 170 MHz
    Display Product Name: 'Acer KG221Q'
  Extension blocks: 1
Checksum: 0xc3

----------------

Block 1, CTA-861 Extension Block:
  Revision: 3
  Underscans IT Video Formats by default
  Basic audio support
  Supports YCbCr 4:4:4
  Supports YCbCr 4:2:2
  Native detailed modes: 1
  Video Data Block:
    VIC  16:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (native)
    VIC   2:   720x480    59.940060 Hz   4:3     31.469 kHz     27.000000 MHz
    VIC   3:   720x480    59.940060 Hz  16:9     31.469 kHz     27.000000 MHz
    VIC   4:  1280x720    60.000000 Hz  16:9     45.000 kHz     74.250000 MHz
    VIC  17:   720x576    50.000000 Hz   4:3     31.250 kHz     27.000000 MHz
    VIC  18:   720x576    50.000000 Hz  16:9     31.250 kHz     27.000000 MHz
    VIC  19:  1280x720    50.000000 Hz  16:9     37.500 kHz     74.250000 MHz
    VIC   5:  1920x1080i  60.000000 Hz  16:9     33.750 kHz     74.250000 MHz
    VIC  20:  1920x1080i  50.000000 Hz  16:9     28.125 kHz     74.250000 MHz
    VIC  31:  1920x1080   50.000000 Hz  16:9     56.250 kHz    148.500000 MHz
    VIC   1:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
  Audio Data Block:
    Linear PCM:
      Max channels: 2
      Supported sample rates (kHz): 48 44.1 32
      Supported sample sizes (bits): 16
  Speaker Allocation Data Block:
    FL/FR - Front Left/Right
  Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
    Source physical address: 1.0.0.0
  Vendor-Specific Data Block (AMD), OUI 00-00-1A:
    Version: 1.1
    Minimum Refresh Rate: 48 Hz
    Maximum Refresh Rate: 75 Hz
    Flags 1.x: 0xe6 (MCCS)
  Detailed Timing Descriptors:
    DTD 3:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (477 mm x 268 mm)
                 Hfront   88 Hsync  44 Hback  148 Hpol P
                 Vfront    4 Vsync   5 Vback   36 Vpol P
    DTD 4:   720x480    59.940060 Hz   3:2     31.469 kHz     27.000000 MHz (477 mm x 268 mm)
                 Hfront   16 Hsync  62 Hback   60 Hpol N
                 Vfront    9 Vsync   6 Vback   30 Vpol N
    DTD 5:  1280x720    60.000000 Hz  16:9     45.000 kHz     74.250000 MHz (477 mm x 268 mm)
                 Hfront  110 Hsync  40 Hback  220 Hpol P
                 Vfront    5 Vsync   5 Vback   20 Vpol P
    DTD 6:   720x576    50.000000 Hz   5:4     31.250 kHz     27.000000 MHz (477 mm x 268 mm)
                 Hfront   12 Hsync  64 Hback   68 Hpol N
                 Vfront    5 Vsync   5 Vback   39 Vpol N
Checksum: 0x35  Unused space in Extension Block: 16 bytes
=================

and i also changed the hostname to "Si-Andrea"

Offline

#8 2024-10-12 07:48:26

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

After removing optimus-manger the integrated screen stopped working and is no longer detected.

What does the xorg log for that look like?
(The one you posted has 

[ 10278.055] (==) ServerLayout "layout"
[ 10278.055] (**) |-->Screen "integrated" (0)
[ 10278.055] (**) |   |-->Monitor "<default monitor>"
[ 10278.056] (**) |   |-->Device "integrated"
[ 10278.056] (**) |   |-->GPUDevice "nvidia"
[ 10278.056] (**) |   |-->GPUDevice "Card0"
[ 10278.056] (==) No monitor specified for screen "integrated".
	Using a default monitor configuration.
[ 10278.056] (**) |-->Inactive Device "nvidia"

which is an OM config)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2024-10-13 08:51:49

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

I think is this one

[    16.892] (==) Log file: "/home/andrea/.local/share/xorg/Xorg.1.log", Time: Sun Oct 13 10:46:13 2024
[    16.892] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.892] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.892] (==) No Layout section.  Using the first Screen section.
[    16.892] (==) No screen section available. Using defaults.
[    16.892] (**) |-->Screen "Default Screen Section" (0)
[    16.892] (**) |   |-->Monitor "<default monitor>"
[    16.893] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    16.893] (**) |   |-->Device "Card0"
[    16.893] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.893] (**) Allowing byte-swapped clients
[    16.893] (==) Automatically adding devices
[    16.893] (==) Automatically enabling devices
[    16.893] (==) Automatically adding GPU devices
[    16.893] (==) Automatically binding GPU devices

Offline

#10 2024-10-13 12:27:34

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

That's just the first dozen line, it'll make more sense to post the complete journal because all the relevant information comes afterwards smile

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2024-10-13 12:36:55

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

i'v just made yet another  system update that seems to have resolved the problem (now nautilus opens correctly without any freezes and optimus-manger is still installed)

Offline

#12 2024-10-13 18:13:16

seth
Member
Registered: 2012-09-03
Posts: 59,718

Re: [SOLVED] External screen freezes when opening nautilus

And what packages were updated?

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2024-10-14 02:41:55

twotee
Member
Registered: 2024-10-14
Posts: 2

Re: [SOLVED] External screen freezes when opening nautilus

my system is reporting fully up-to-date but i'm still encountering the same issue reported. 

Oct 13 19:05:39  systemd[2031]: Started dbus-:1.2-org.gnome.Nautilus@1.service.
Oct 13 19:05:39  nautilus[43104]: Connecting to org.freedesktop.Tracker3.Miner.Files
Oct 13 19:05:39  nautilus[43104]: Tracker 2 migration: Couldn't run tinysparql3: Failed to execute child process “tinysparql3” (No such file or directory)
Oct 13 19:05:39  systemd[2031]: Started dbus-:1.2-org.gnome.NautilusPreviewer@1.service.
Oct 13 19:05:39  gnome-shell[2153]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x6200004 (wallpaper.com wants to save)
Oct 13 19:05:42  /usr/lib/gdm-x-session[2074]: (II) event6  - Mouse: SYN_DROPPED event - some input events have been lost.

this is all i'm seeing in my journalctl -b output and nothing in my xorg logs. this specific event occurred when my browser tried to save a wallpaper using nautilus but the same thing happens when launching nautilius on its own. my current fix is to switch my tty to tty0 and back with a keyboard shortcut.

Last edited by twotee (2024-10-14 02:43:42)

Offline

#14 2024-10-14 19:32:12

Rambo-IT
Member
Registered: 2023-08-14
Posts: 14

Re: [SOLVED] External screen freezes when opening nautilus

here is a list of the updated packages in the last system update:

[2024-10-13T10:57:47+0200] [ALPM] upgraded systemd-libs (256.6-1 -> 256.7-1)
[2024-10-13T10:57:47+0200] [ALPM] upgraded cifs-utils (7.0-5 -> 7.1-1)
[2024-10-13T10:57:47+0200] [ALPM] upgraded libuv (1.49.0-1 -> 1.49.1-1)
[2024-10-13T10:57:47+0200] [ALPM] upgraded cmake (3.30.4-1 -> 3.30.5-1)
[2024-10-13T10:57:47+0200] [ALPM] upgraded libcups (2:2.4.10-1 -> 2:2.4.11-1)
[2024-10-13T10:57:47+0200] [ALPM] upgraded systemd (256.6-1 -> 256.7-1)
[2024-10-13T10:57:48+0200] [ALPM] upgraded cups (2:2.4.10-1 -> 2:2.4.11-1)
[2024-10-13T10:57:48+0200] [ALPM] upgraded dhcpcd (10.0.10-1 -> 10.1.0-1)
[2024-10-13T10:57:48+0200] [ALPM] upgraded nvidia-utils (560.35.03-5 -> 560.35.03-6)
[2024-10-13T10:57:48+0200] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2024-10-13T10:57:48+0200] [ALPM-SCRIPTLET] If you use GDM on Wayland, you might have to run systemctl enable --now nvidia-resume.service
[2024-10-13T10:57:48+0200] [ALPM-SCRIPTLET] If you use sleep on wayland, you might have to run systemctl enable nvidia-resume nvidia-hibernate nvidia-suspend
[2024-10-13T10:57:49+0200] [ALPM] upgraded gtk3 (1:3.24.43-3 -> 1:3.24.43-4)
[2024-10-13T10:57:49+0200] [ALPM] upgraded python (3.12.6-1 -> 3.12.7-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded firefox (131.0-1 -> 131.0.2-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded git (2.46.2-1 -> 2.47.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libimobiledevice-glue (1.3.0-1 -> 1.3.1-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded gnome-bluetooth-3.0 (47.0-2 -> 47.1-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded gnome-software (47.0-1 -> 47.1-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded lib2geom (1.3-2 -> 1.4-2)
[2024-10-13T10:57:49+0200] [ALPM] upgraded python-charset-normalizer (3.3.2-2 -> 3.4.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded inkscape (1.3.2-12 -> 1.4-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded js115 (115.15.0-1 -> 115.16.1-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded js128 (128.2.0-1 -> 128.3.1-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded kwayland-integration (6.1.5-1 -> 6.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded lib32-systemd (256.6-1 -> 256.7-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-crypto (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-fs (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-loop (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-mdraid (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-nvme (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-part (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:49+0200] [ALPM] upgraded libblockdev-swap (3.1.1-2 -> 3.2.0-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded libnm (1.48.10-1 -> 1.50.0-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded linux (6.11.2.arch1-1 -> 6.11.3.arch1-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded luajit (2.1.1725453128-1 -> 2.1.1727870382-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded xorg-xwayland (24.1.2-1 -> 24.1.3-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded mutter (47.0-3 -> 47.0-4)
[2024-10-13T10:57:50+0200] [ALPM] upgraded networkmanager (1.48.10-1 -> 1.50.0-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded npm (10.8.3-1 -> 10.9.0-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded nvidia (560.35.03-11 -> 560.35.03-12)
[2024-10-13T10:57:50+0200] [ALPM] upgraded python-pyproject-hooks (1.1.0-1 -> 1.2.0-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded rygel (1:0.44.0-1 -> 1:0.44.1-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded snapshot (47.0.1-2 -> 47.1-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded systemd-resolvconf (256.6-1 -> 256.7-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded systemd-sysvcompat (256.6-1 -> 256.7-1)
[2024-10-13T10:57:50+0200] [ALPM] upgraded webkit2gtk-4.1 (2.46.1-3 -> 2.46.1-4)
[2024-10-13T10:57:50+0200] [ALPM] upgraded webkitgtk-6.0 (2.46.1-3 -> 2.46.1-4)
[2024-10-13T10:57:52+0200] [ALPM] upgraded wine (9.18-2 -> 9.19-1)

hope this can help!

Offline

#15 2024-10-14 23:42:17

twotee
Member
Registered: 2024-10-14
Posts: 2

Re: [SOLVED] External screen freezes when opening nautilus

hmmm, i wonder if the issue was fixed on the nvidia proprietary drivers since i'm running the nvidia-open drivers and still encountering this issue despite having the same package versions for everything else.

Edit 10/16/2024: I found issues for this bug on the gnome gitlab page and it seems like no-one really has an answer/proper fix however, installing the nightly build of nautilus via flatpak seems to have resolved these issues. Only issue now is Brave's default file-manager, which I also can't seem to figure out how to change, is the default nautilus so it crashes my display when trying to download/upload files on websites. I guess we just gotta wait for some updates to hit the pipeline.

Last edited by twotee (2024-10-16 21:05:19)

Offline

Pages: 1

Board footer

Powered by FluxBB