Arch Linux

ramon_alf

Member

Registered: 2024-10-07

Posts: 2

Second screen not working with amd

I have an MSI Bravo 17 laptop and when I connect my HDMI, it doesn't detect anything nor does my computer react at all. The screen seems to detect that something has been connected, but it just tries to find a signal through HDMI and shows nothing. When I go into the screen settings in Arch, it only shows the integrated display.

I think it might be a BIOS issue, but I've already changed every parameter that I'm allowed to change and it hasn't made a difference. I've disabled Secure Boot, Fast Boot, Secure Computing, or something like that, and nothing works. Here is the output of the command inxi -Fxnzr:

inxi -Fxnzr
System:
  Kernel: 6.11.4-arch2-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
  Desktop: KDE Plasma v: 6.2.1 Distro: Arch Linux
Machine:
  Type: Laptop System: Micro-Star product: Bravo 17 A4DDR v: REV:1.0
    serial: <superuser required>
  Mobo: Micro-Star model: MS-17FK v: REV:1.0 serial: <superuser required>
    UEFI: American Megatrends v: E17FKAMS.117 date: 10/29/2020
Battery:
  ID-1: BAT1 charge: 28.9 Wh (80.7%) condition: 35.8/51.3 Wh (69.8%)
    volts: 12.8 min: 11.4 model: MSI Corp. MS-17FK status: charging
  Device-1: hidpp_battery_0 model: Logitech MX Vertical Advanced Ergonomic
    Mouse charge: 55% (should be ignored) status: discharging
CPU:
  Info: 8-core model: AMD Ryzen 7 4800H with Radeon Graphics bits: 64
    type: MT MCP arch: Zen 2 rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 8 MiB
  Speed (MHz): avg: 1400 min/max: 1400/2900 boost: enabled cores: 1: 1400
    2: 1400 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 8: 1400 9: 1400 10: 1400
    11: 1400 12: 1400 13: 1400 14: 1400 15: 1400 16: 1400 bogomips: 92660
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 14 [Radeon RX 5500/5500M /
    Pro 5500M] vendor: Micro-Star MSI driver: N/A arch: RDNA-1 bus-ID: 03:00.0
  Device-2: Advanced Micro Devices [AMD/ATI] Renoir [Radeon Vega Series /
    Radeon Mobile Series] vendor: Micro-Star MSI driver: amdgpu v: kernel
    arch: GCN-5 bus-ID: 07:00.0 temp: 41.0 C
  Device-3: SunplusIT HD Webcam driver: uvcvideo type: USB bus-ID: 1-4:3
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.3
    compositor: kwin_wayland driver: X: loaded: amdgpu
    unloaded: modesetting,radeon dri: radeonsi gpu: amdgpu
    resolution: 1920x1080
  API: EGL v: 1.5 drivers: kms_swrast,radeonsi,swrast platforms:
    active: gbm,wayland,x11,surfaceless,device inactive: N/A
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.2.5-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
    renoir LLVM 18.1.8 DRM 3.59 6.11.4-arch2-1)
  API: Vulkan v: 1.3.295 drivers: radv surfaces: xcb,xlib,wayland devices: 1
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 10 HDMI Audio
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus-ID: 03:00.1
  Device-2: Advanced Micro Devices [AMD] ACP/ACP3X/ACP6x Audio Coprocessor
    vendor: Micro-Star MSI driver: N/A bus-ID: 07:00.5
  Device-3: Advanced Micro Devices [AMD] Family 17h/19h HD Audio
    vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus-ID: 07:00.6
  API: ALSA v: k6.11.4-arch2-1 status: kernel-api
  Server-1: PipeWire v: 1.2.5 status: active
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 04:00.0
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Micro-Star MSI driver: r8169 v: kernel port: f000 bus-ID: 05:00.0
  IF: enp5s0 state: down mac: <filter>
Bluetooth:
  Device-1: N/A driver: btusb v: 0.8 type: USB bus-ID: 3-3:2
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11
Drives:
  Local Storage: total: 1.38 TiB used: 39.57 GiB (2.8%)
  ID-1: /dev/nvme0n1 vendor: Kingston model: RBUSNS8154P3512GJ5
    size: 476.94 GiB temp: 31.9 C
  ID-2: /dev/sda vendor: SanDisk model: SSD PLUS 1000GB size: 931.52 GiB
Partition:
  ID-1: / size: 467.4 GiB used: 39.41 GiB (8.4%) fs: ext4 dev: /dev/nvme0n1p2
  ID-2: /boot size: 1022 MiB used: 171.8 MiB (16.8%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: zram size: 4 GiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 60.1 C mobo: N/A gpu: amdgpu temp: 41.0 C
  Fan Speeds (rpm): N/A
Repos:
  Packages: 904
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://arch.jsc.mx/$repo/os/$arch
    2: http://lidsol.fi-b.unam.mx/archlinux/$repo/os/$arch
    3: https://lidsol.fi-b.unam.mx/archlinux/$repo/os/$arch
Info:
  Memory: total: 16 GiB note: est. available: 15.02 GiB used: 4.5 GiB (30.0%)
  Processes: 363 Uptime: 1h 17m Init: systemd
  Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.37 inxi: 3.3.36

And here is the output of the command kscreen-doctor -o:

kscreen-doctor -o
Output: 1 eDP-1
	enabled
	connected
	priority 1
	Panel
	Modes:  1:1920x1080@144*!  2:1920x1080@60  3:1680x1050@144  4:1280x1024@144  5:1440x900@144  6:1280x800@144  7:1280x720@144  8:1024x768@144  9:800x600@144  10:640x480@144  11:1280x1024@60  12:1024x768@60  13:1280x800@60  14:1920x1080@60  15:1600x900@60  16:1368x768@60  17:1280x720@60
	Geometry: 0,0 1920x1080
	Scale: 1
	Rotation: 1
	Overscan: 0
	Vrr: Automatic
	RgbRange: unknown
	HDR: incapable
	Wide Color Gamut: incapable
	ICC profile: none
	Color profile source: ICC
	Brightness control: supported, set to 100%

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 23,300

Re: Second screen not working with amd

You're out of date... there have been a bunch of important multi-gpu bugfixes in plasma 6.2.1.1 and by extension 6.2.2 both of which have been released in the meantime. Update your system and reboot and check whether you can reproduce.

https://bbs.archlinux.org/viewtopic.php?id=130309

Last edited by V1del (2024-10-26 09:41:13)

ramon_alf

Member

Registered: 2024-10-07

Posts: 2

Re: Second screen not working with amd

I already updated with sudo pacman -Syu and restarted, but nothing changed, same situation.

Sorry if you meant something else. I'm kinda new to Linux—not a complete newbie, but still getting the hang of it.