You are not logged in.

Pages: 1

#1 2024-10-29 04:31:38

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

[SOLVED] Vulkan driver not working in computer with 2 GPUs

Hi all, I'm troubleshooting an issue where I can't get many Steam games to run on a new install of Arch. I have a computer with two individual Asus Strix RTX 3090s and I am having this exact issue: https://bbs.archlinux.org/viewtopic.php?id=282617. When I launch a game, it get a flickering, black screen full of artifacts. Sometimes my monitor turns off.

If I set "PROTON_USE_WINED3D=1" in Steam launch options, the games will work.

The Arch Wiki says I may need to force Vulkan to use a specific GPU: https://wiki.archlinux.org/title/Vulkan#Switching

However, the output of MESA_VK_DEVICE_SELECT=list vulkaninfo shows both my GPUs have the same vendorID:deviceID, so I'm not sure if I can pick one this way. To be clear they're individual GPUs in PCI-e slots 1 and 4, no bridge between them.

$ MESA_VK_DEVICE_SELECT=list vulkaninfo
selectable devices:
  GPU 0: 10de:2204 "NVIDIA GeForce RTX 3090" discrete GPU 0000:05:00.0
  GPU 1: 10de:2204 "NVIDIA GeForce RTX 3090" discrete GPU 0000:0b:00.0

I tried setting the suggested variable anyway, but get the same result. vkcube also shows a similar flickering void of artifacts. 

$ MESA_VK_DEVICE_SELECT=10de:2204!
$ vkcube
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu

I've messed with wine/proton/steam versions/settings, but since vkcube has issues, I am guessing Vulkan is the culprit. I appreciate any guidance, thank you. Below is some more potentially relevant output:

$ sudo pacman -Qs vulkan
local/lib32-nvidia-utils 560.35.03-1
    NVIDIA drivers utilities (32-bit)
local/lib32-vulkan-icd-loader 1.3.295-1
    Vulkan Installable Client Driver (ICD) Loader (32-bit)
local/nvidia-utils 560.35.03-18
    NVIDIA drivers utilities
local/qt6-shadertools 6.8.0-1 (qt6)
    Provides functionality for the shader pipeline that allows Qt Quick to operate on
    Vulkan, Metal, and Direct3D, in addition to OpenGL
local/spirv-tools 2024.2-1 (vulkan-devel)
    API and commands for processing SPIR-V modules
local/vulkan-headers 1:1.3.295-1 (vulkan-devel)
    Vulkan header files
local/vulkan-icd-loader 1.3.295-1
    Vulkan Installable Client Driver (ICD) Loader
local/vulkan-mesa-layers 1:24.2.5-1
    Mesa's Vulkan layers
local/vulkan-tools 1.3.269-1 (vulkan-devel)
    Vulkan Utilities and Tools
$ sudo pacman -Qs nvidia
local/egl-gbm 1.1.2-1
 The GBM EGL external platform library
local/egl-wayland 4:1.1.16-1
    EGLStream-based Wayland external platform
local/lib32-nvidia-utils 560.35.03-1
    NVIDIA drivers utilities (32-bit)
local/libvdpau 1.5-3
    Nvidia VDPAU library
local/nvidia 560.35.03-17
    NVIDIA kernel modules
local/nvidia-utils 560.35.03-18
    NVIDIA drivers utilities
 lspci -knn
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex [1022:1480]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU [1022:1481]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:01.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
        DeviceName:  Onboard IGD
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:03.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge [1022:1483]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:05.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:07.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:07.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge [1022:1482]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] [1022:1484]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 0 [1022:1440]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 1 [1022:1441]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 2 [1022:1442]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 3 [1022:1443]
        Kernel driver in use: k10temp
        Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 4 [1022:1444]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 5 [1022:1445]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 6 [1022:1446]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 7 [1022:1447]
01:00.0 Non-Volatile memory controller [0108]: Phison Electronics Corporation E16 PCIe4 NVMe Controller [1987:5016] (rev 01)
        Subsystem: Phison Electronics Corporation E16 PCIe4 NVMe Controller [1987:5016]
        Kernel driver in use: nvme
        Kernel modules: nvme
02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse Switch Upstream [1022:57ad]
        Kernel driver in use: pcieport
03:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a3]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a3]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:03.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a3]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a3]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:08.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a4]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a4]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
03:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge [1022:57a4]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: pcieport
04:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO [144d:a80a]
        Subsystem: Samsung Electronics Co Ltd SSD 980 PRO [144d:a801]
        Kernel driver in use: nvme
        Kernel modules: nvme
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA102 [GeForce RTX 3090] [10de:2204] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87af]
        Kernel driver in use: nvidia
        Kernel modules: nouveau, nvidia_drm, nvidia
05:00.1 Audio device [0403]: NVIDIA Corporation GA102 High Definition Audio Controller [10de:1aef] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87af]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125]
        Subsystem: ASUSTeK Computer Inc. Device [1043:879b]
        Kernel driver in use: r8169
        Kernel modules: r8169
07:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device [1043:85f0]
        Kernel driver in use: igb
        Kernel modules: igb
08:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:1485]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
08:00.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
08:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c]
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:148c]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
09:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
        Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901]
        Kernel driver in use: ahci
0a:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 51)
        Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901]
        Kernel driver in use: ahci
0b:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA102 [GeForce RTX 3090] [10de:2204] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87af]
        Kernel driver in use: nvidia
        Kernel modules: nouveau, nvidia_drm, nvidia
0b:00.1 Audio device [0403]: NVIDIA Corporation GA102 High Definition Audio Controller [10de:1aef] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:87af]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
0c:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function [1022:148a]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
0d:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:1485]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
0d:00.1 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP [1022:1486]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: ccp
        Kernel modules: ccp
0d:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c0]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
0d:00.4 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller [1022:1487]
        Subsystem: ASUSTeK Computer Inc. Device [1043:87c4]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
 vulkaninfo --summary
==========
VULKANINFO
==========

Vulkan Instance Version: 1.3.295


Instance Extensions: count = 23
-------------------------------
VK_EXT_acquire_drm_display             : extension revision 1
VK_EXT_acquire_xlib_display            : extension revision 1
VK_EXT_debug_report                    : extension revision 10
VK_EXT_debug_utils                     : extension revision 2
VK_EXT_direct_mode_display             : extension revision 1
VK_EXT_display_surface_counter         : extension revision 1
VK_EXT_surface_maintenance1            : extension revision 1
VK_EXT_swapchain_colorspace            : extension revision 4
VK_KHR_device_group_creation           : extension revision 1
VK_KHR_display                         : extension revision 23
VK_KHR_external_fence_capabilities     : extension revision 1
VK_KHR_external_memory_capabilities    : extension revision 1
VK_KHR_external_semaphore_capabilities : extension revision 1
VK_KHR_get_display_properties2         : extension revision 1
VK_KHR_get_physical_device_properties2 : extension revision 2
VK_KHR_get_surface_capabilities2       : extension revision 1
VK_KHR_portability_enumeration         : extension revision 1
VK_KHR_surface                         : extension revision 25
VK_KHR_surface_protected_capabilities  : extension revision 1
VK_KHR_wayland_surface                 : extension revision 6
VK_KHR_xcb_surface                     : extension revision 6
VK_KHR_xlib_surface                    : extension revision 6
VK_LUNARG_direct_driver_loading        : extension revision 1

Instance Layers: count = 8
--------------------------
VK_LAYER_INTEL_nullhw             INTEL NULL HW                1.1.73   version 1
VK_LAYER_MESA_device_select       Linux device selection layer 1.3.211  version 1
VK_LAYER_MESA_overlay             Mesa Overlay layer           1.3.211  version 1
VK_LAYER_NV_optimus               NVIDIA Optimus layer         1.3.280  version 1
VK_LAYER_VALVE_steam_fossilize_32 Steam Pipeline Caching Layer 1.3.207  version 1
VK_LAYER_VALVE_steam_fossilize_64 Steam Pipeline Caching Layer 1.3.207  version 1
VK_LAYER_VALVE_steam_overlay_32   Steam Overlay Layer          1.3.207  version 1
VK_LAYER_VALVE_steam_overlay_64   Steam Overlay Layer          1.3.207  version 1

Devices:
========
GPU0:
        apiVersion         = 1.3.280
        driverVersion      = 560.35.3.0
        vendorID           = 0x10de
        deviceID           = 0x2204
        deviceType         = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
        deviceName         = NVIDIA GeForce RTX 3090
        driverID           = DRIVER_ID_NVIDIA_PROPRIETARY
        driverName         = NVIDIA
        driverInfo         = 560.35.03
        conformanceVersion = 1.3.8.2
        deviceUUID         = 815ccaae-7d91-f0eb-e498-09db018412ef
        driverUUID         = c3ca0510-c7e6-5f1c-86a1-dc0ed4ea4e21
GPU1:
        apiVersion         = 1.3.280
        driverVersion      = 560.35.3.0
        vendorID           = 0x10de
        deviceID           = 0x2204
        deviceType         = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
        deviceName         = NVIDIA GeForce RTX 3090
        driverID           = DRIVER_ID_NVIDIA_PROPRIETARY
        driverName         = NVIDIA
        driverInfo         = 560.35.03
        conformanceVersion = 1.3.8.2
        deviceUUID         = e670143b-1049-ad06-8984-9e6bca0a75ee
        driverUUID         = c3ca0510-c7e6-5f1c-86a1-dc0ed4ea4e21

Last edited by lonelygarden (2024-10-29 17:19:56)

Offline

#2 2024-10-29 07:46:49

seth
Member
Registered: 2012-09-03
Posts: 59,045

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

Please use [code][/code] tags, not "quote" tags. Edit your post in this regard.

Did you test the behavior w/ only one GPU to make sure that's actually the problem?
Can you sufficiently control the GPU w/

DRI_PRIME=pci-0000_05_00_0 vkcube

resp

DRI_PRIME=pci-0000_0b_00_0 vkcube

?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2024-10-29 12:47:00

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 12,977

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

Also try using MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE some_command to ensure vulkan only reports one device.

https://docs.mesa3d.org/envvars.html#vulkan-mesa-device-select-layer-environment-variables wrote:

MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE

    when set to 1, the device identified as default will be the only one returned in vkEnumeratePhysicalDevices API.

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#4 2024-10-29 13:17:44

cryptearth
Member
Registered: 2024-02-03
Posts: 1,016

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

aside from the issue - what's the reason you have two gpus in the first place? multi-gpu (both nvidia sli and amd crossfire) is a thing of the past - so multiple gpus make only sense in either crypto mining or AI stuff - or something realy specialized like CAD - do you any of these things? if this a system for gaming only - you just wasted your money for a 2nd gpu no game will use

Offline

#5 2024-10-29 14:36:45

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

The second GPU is for rendering/AI, and both GPUs work 100% for that. I'm expecting to use a single GPU for games. Minor correction, the second GPU is in PCIe slot 3, not 4.

If I unplug one of the GPUs, everything works fine. By "everything" I tested vkcube and 3 games that don't otherwise work (Outer Wilds, Hades, Parkitect)

Plugging both GPUs in for the rest of this post. These two commands give me the same output of "Selected GPU 0" which I'm not sure is correct. vkcube does not render correctly either time. If I run nvidia-smi after either vkcube command, I can see the VRAM and power usage increase on GPU 0 and no significant change on GPU 1.

$ DRI_PRIME=pci-0000_05_00_0 vkcube
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu
$ DRI_PRIME=pci-0000_0b_00_0 vkcube
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu

If I set MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE=1, vulkaninfo only reports GPU0, which seems correct.

$ MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE=1 vulkaninfo --summary
==========
VULKANINFO
==========

Vulkan Instance Version: 1.3.295


Instance Extensions: count = 23
-------------------------------
VK_EXT_acquire_drm_display             : extension revision 1
VK_EXT_acquire_xlib_display            : extension revision 1
VK_EXT_debug_report                    : extension revision 10
VK_EXT_debug_utils                     : extension revision 2
VK_EXT_direct_mode_display             : extension revision 1
VK_EXT_display_surface_counter         : extension revision 1
VK_EXT_surface_maintenance1            : extension revision 1
VK_EXT_swapchain_colorspace            : extension revision 4
VK_KHR_device_group_creation           : extension revision 1
VK_KHR_display                         : extension revision 23
VK_KHR_external_fence_capabilities     : extension revision 1
VK_KHR_external_memory_capabilities    : extension revision 1
VK_KHR_external_semaphore_capabilities : extension revision 1
VK_KHR_get_display_properties2         : extension revision 1
VK_KHR_get_physical_device_properties2 : extension revision 2
VK_KHR_get_surface_capabilities2       : extension revision 1
VK_KHR_portability_enumeration         : extension revision 1
VK_KHR_surface                         : extension revision 25
VK_KHR_surface_protected_capabilities  : extension revision 1
VK_KHR_wayland_surface                 : extension revision 6
VK_KHR_xcb_surface                     : extension revision 6
VK_KHR_xlib_surface                    : extension revision 6
VK_LUNARG_direct_driver_loading        : extension revision 1

Instance Layers: count = 8
--------------------------
VK_LAYER_INTEL_nullhw             INTEL NULL HW                1.1.73   version 1
VK_LAYER_MESA_device_select       Linux device selection layer 1.3.211  version 1
VK_LAYER_MESA_overlay             Mesa Overlay layer           1.3.211  version 1
VK_LAYER_NV_optimus               NVIDIA Optimus layer         1.3.280  version 1
VK_LAYER_VALVE_steam_fossilize_32 Steam Pipeline Caching Layer 1.3.207  version 1
VK_LAYER_VALVE_steam_fossilize_64 Steam Pipeline Caching Layer 1.3.207  version 1
VK_LAYER_VALVE_steam_overlay_32   Steam Overlay Layer          1.3.207  version 1
VK_LAYER_VALVE_steam_overlay_64   Steam Overlay Layer          1.3.207  version 1

Devices:
========
GPU0:
        apiVersion         = 1.3.280
        driverVersion      = 560.35.3.0
        vendorID           = 0x10de
        deviceID           = 0x2204
        deviceType         = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
        deviceName         = NVIDIA

However, "MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE=1 vkcube" still doesn't render correctly.

MESA_VK_DEVICE_SELECT_FORCE_DEFAULT_DEVICE=1 vkcube
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu

Not sure if this is useful, but I unset all environmental variables, and tried running vkcube on each GPU like this. The first command gives me the bad output. The second command gives an error and vkcube doesn't pop up at all:

$ vkcube --gpu_number 0
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu
$ vkcube --gpu_number 1
Selected GPU 1: NVIDIA GeForce RTX 3090, type: DiscreteGpu
Could not find both graphics and present queues

I tried using https://github.com/JoseD92/vkdevicechooser as well (I see it's no longer supported now). If I set VULKAN_DEVICE_INDEX, I can see one or the other GPU in vulkaninfo, but running vkcube I have the same issue. The first one gives me the window with the bad output. The second one doesn't give me the window at all:

$ ENABLE_DEVICE_CHOOSER_LAYER=1 VULKAN_DEVICE_INDEX=0 vkcube
Using Vulkan device index 0
Using Vulkan device index 0
Using Vulkan device index 0
Using Vulkan device index 0
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu

$ ENABLE_DEVICE_CHOOSER_LAYER=1 VULKAN_DEVICE_INDEX=1 vkcube
Using Vulkan device index 1
Using Vulkan device index 1
Using Vulkan device index 1
Using Vulkan device index 1
Selected GPU 0: NVIDIA GeForce RTX 3090, type: DiscreteGpu
Could not find both graphics and present queues

Last edited by lonelygarden (2024-10-29 14:53:05)

Offline

#6 2024-10-29 14:52:12

seth
Member
Registered: 2012-09-03
Posts: 59,045

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

The second GPU is for rendering/AI

So you basically don't want it to show up in the GUI context anyway, right?

Try sth. like the bwlow, but first post the xorg log you're facing atm.

Section "ServerLayout"
        Identifier "layout"
        Screen 0 "nvidia"
        Inactive "nvidia2"
        Option "AllowNVIDIAGPUScreens"
EndSection

Section "Device"
        Identifier "nvidia"
        Driver "nvidia"
        BusID "PCI:11:0:0"
EndSection

Section "Screen"
        Identifier "nvidia"
        Device "nvidia"
EndSection

Section "Device"
        Identifier "nvidia2"
        Driver "nvidia"
        BusID "PCI:5:0:0"
EndSection

Section "Screen"
        Identifier "nvidia2"
        Device "nvidia2"
EndSection

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2024-10-29 15:12:37

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

I do use the second GPU with a GUI (local LLM while coding) but I can try whatever solution that isn't yanking a GPU if I want to play a game.

Xorg log:

[    12.627] (--) Log file renamed from "/var/log/Xorg.pid-922.log" to "/var/log/Xorg.0.log"
[    12.628] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[    12.628] Current Operating System: Linux hedone 6.11.5-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 22 Oct 2024 18:31:38 +0000 x86_64
[    12.628] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=17e8850d-e2a1-4e85-ac69-046416d12983 rw loglevel=3 quiet cryptdevice=UUID=a7a42a66-2059-4f60-a822-23633a227985:cryptroot root=UUID=17e8850d-e2a1-4e85-ac69-046416d12983
[    12.628]  
[    12.628] Current version of pixman: 0.43.4
[    12.628] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.628] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.628] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 29 10:55:27 2024
[    12.629] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.629] (==) No Layout section.  Using the first Screen section.
[    12.629] (==) No screen section available. Using defaults.
[    12.629] (**) |-->Screen "Default Screen Section" (0)
[    12.629] (**) |   |-->Monitor "<default monitor>"
[    12.629] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    12.629] (**) Allowing byte-swapped clients
[    12.629] (==) Automatically adding devices
[    12.629] (==) Automatically enabling devices
[    12.629] (==) Automatically adding GPU devices
[    12.630] (==) Automatically binding GPU devices
[    12.630] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.630] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    12.630] 	Entry deleted from font path.
[    12.630] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    12.630] 	Entry deleted from font path.
[    12.630] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    12.630] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    12.630] 	Entry deleted from font path.
[    12.630] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    12.630] 	Entry deleted from font path.
[    12.630] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    12.630] 	Entry deleted from font path.
[    12.630] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    12.630] 	Entry deleted from font path.
[    12.630] (==) FontPath set to:
	
[    12.630] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.630] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.630] (II) Module ABI versions:
[    12.630] 	X.Org ANSI C Emulation: 0.4
[    12.630] 	X.Org Video Driver: 25.2
[    12.630] 	X.Org XInput driver : 24.4
[    12.630] 	X.Org Server Extension : 10.0
[    12.630] (++) using VT number 2

[    12.630] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    12.632] (II) xfree86: Adding drm device (/dev/dri/card1)
[    12.632] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:02.0/0000:05:00.0/drm/card1
[    12.633] (II) xfree86: Adding drm device (/dev/dri/card2)
[    12.633] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:0b:00.0/drm/card2
[    12.810] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    12.810] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    12.813] (--) PCI: (5@0:0:0) 10de:2204:1043:87af rev 161, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    12.813] (--) PCI:*(11@0:0:0) 10de:2204:1043:87af rev 161, Mem @ 0xfb000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[    12.813] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    12.813] (II) LoadModule: "glx"
[    12.814] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    12.818] (II) Module glx: vendor="X.Org Foundation"
[    12.818] 	compiled for 1.21.1.13, module version = 1.0.0
[    12.818] 	ABI class: X.Org Server Extension, version 10.0
[    12.818] (II) Applying OutputClass "nvidia" to /dev/dri/card2
[    12.818] 	loading driver: nvidia
[    12.818] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    12.818] 	loading driver: nvidia
[    12.818] (==) Matched nvidia as autoconfigured driver 0
[    12.818] (==) Matched nouveau as autoconfigured driver 1
[    12.818] (==) Matched nv as autoconfigured driver 2
[    12.818] (==) Matched modesetting as autoconfigured driver 3
[    12.818] (==) Matched fbdev as autoconfigured driver 4
[    12.818] (==) Matched vesa as autoconfigured driver 5
[    12.818] (==) Assigned the driver to the xf86ConfigLayout
[    12.818] (II) LoadModule: "nvidia"
[    12.818] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    12.821] (II) Module nvidia: vendor="NVIDIA Corporation"
[    12.821] 	compiled for 1.6.99.901, module version = 1.0.0
[    12.821] 	Module class: X.Org Video Driver
[    12.822] (II) LoadModule: "nouveau"
[    12.822] (WW) Warning, couldn't open module nouveau
[    12.822] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    12.822] (II) LoadModule: "nv"
[    12.822] (WW) Warning, couldn't open module nv
[    12.822] (EE) Failed to load module "nv" (module does not exist, 0)
[    12.822] (II) LoadModule: "modesetting"
[    12.822] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.891] (II) Module modesetting: vendor="X.Org Foundation"
[    12.891] 	compiled for 1.21.1.13, module version = 1.21.1
[    12.891] 	Module class: X.Org Video Driver
[    12.891] 	ABI class: X.Org Video Driver, version 25.2
[    12.891] (II) LoadModule: "fbdev"
[    12.892] (WW) Warning, couldn't open module fbdev
[    12.892] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    12.892] (II) LoadModule: "vesa"
[    12.892] (WW) Warning, couldn't open module vesa
[    12.892] (EE) Failed to load module "vesa" (module does not exist, 0)
[    12.892] (II) NVIDIA dlloader X Driver  560.35.03  Fri Aug 16 21:25:43 UTC 2024
[    12.892] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    12.892] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    12.905] (II) Loading sub module "fb"
[    12.905] (II) LoadModule: "fb"
[    12.905] (II) Module "fb" already built-in
[    12.905] (II) Loading sub module "wfb"
[    12.905] (II) LoadModule: "wfb"
[    12.905] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    12.906] (II) Module wfb: vendor="X.Org Foundation"
[    12.906] 	compiled for 1.21.1.13, module version = 1.0.0
[    12.906] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    12.907] (WW) Falling back to old probe method for modesetting
[    12.907] (EE) open /dev/dri/card0: No such file or directory
[    12.907] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    12.907] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    12.907] (==) NVIDIA(0): RGB weight 888
[    12.907] (==) NVIDIA(0): Default visual is TrueColor
[    12.907] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    12.907] (II) Applying OutputClass "nvidia" options to /dev/dri/card2
[    12.907] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    12.907] (**) NVIDIA(0): Enabling 2D acceleration
[    12.907] (II) Loading sub module "glxserver_nvidia"
[    12.907] (II) LoadModule: "glxserver_nvidia"
[    12.907] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    12.951] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    12.951] 	compiled for 1.6.99.901, module version = 1.0.0
[    12.951] 	Module class: X.Org Server Extension
[    12.951] (II) NVIDIA GLX Module  560.35.03  Fri Aug 16 21:27:48 UTC 2024
[    12.951] (II) NVIDIA: The X server supports PRIME Render Offload.
[    12.954] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:11:0:0
[    12.954] (--) NVIDIA(0):     DFP-0
[    12.954] (--) NVIDIA(0):     DFP-1
[    12.954] (--) NVIDIA(0):     DFP-2
[    12.954] (--) NVIDIA(0):     DFP-3 (boot)
[    12.954] (--) NVIDIA(0):     DFP-4
[    12.954] (--) NVIDIA(0):     DFP-5
[    12.954] (--) NVIDIA(0):     DFP-6
[    12.954] (--) NVIDIA(0):     DFP-7
[    12.961] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3090 (GA102-A) at PCI:11:0:0
[    12.961] (II) NVIDIA(0):     (GPU-0)
[    12.961] (--) NVIDIA(0): Memory: 25165824 kBytes
[    12.961] (--) NVIDIA(0): VideoBIOS: 94.02.42.00.a8
[    12.961] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    13.010] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    13.010] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    13.010] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[    13.010] (--) NVIDIA(GPU-0): 
[    13.010] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    13.010] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    13.010] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    13.010] (--) NVIDIA(GPU-0): 
[    13.011] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    13.011] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    13.011] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    13.011] (--) NVIDIA(GPU-0): 
[    13.013] (--) NVIDIA(GPU-0): Asustek Computer Inc VG259QM (DFP-3): connected
[    13.013] (--) NVIDIA(GPU-0): Asustek Computer Inc VG259QM (DFP-3): Internal DisplayPort
[    13.013] (--) NVIDIA(GPU-0): Asustek Computer Inc VG259QM (DFP-3): 2670.0 MHz maximum pixel clock
[    13.013] (--) NVIDIA(GPU-0): 
[    13.015] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    13.015] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[    13.015] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock
[    13.015] (--) NVIDIA(GPU-0): 
[    13.015] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    13.015] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    13.015] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[    13.015] (--) NVIDIA(GPU-0): 
[    13.015] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    13.015] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    13.015] (--) NVIDIA(GPU-0): DFP-6: 2670.0 MHz maximum pixel clock
[    13.015] (--) NVIDIA(GPU-0): 
[    13.015] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    13.015] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    13.015] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[    13.015] (--) NVIDIA(GPU-0): 
[    13.047] (==) NVIDIA(0): 
[    13.047] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    13.047] (==) NVIDIA(0):     will be used as the requested mode.
[    13.047] (==) NVIDIA(0): 
[    13.051] (II) NVIDIA(0): Validated MetaModes:
[    13.051] (II) NVIDIA(0):     "DFP-3:nvidia-auto-select"
[    13.051] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    13.252] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[    13.252] (--) NVIDIA(0):     option
[    13.252] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    13.252] (==) NVIDIA(G0): RGB weight 888
[    13.252] (==) NVIDIA(G0): Default visual is TrueColor
[    13.252] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    13.252] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    13.252] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    13.252] (**) NVIDIA(G0): Enabling 2D acceleration
[    13.252] (II) NVIDIA: The X server supports PRIME Render Offload.
[    13.254] (--) NVIDIA(0): Valid display device(s) on GPU-1 at PCI:5:0:0
[    13.254] (--) NVIDIA(0):     DFP-0
[    13.254] (--) NVIDIA(0):     DFP-1
[    13.254] (--) NVIDIA(0):     DFP-2
[    13.254] (--) NVIDIA(0):     DFP-3
[    13.254] (--) NVIDIA(0):     DFP-4
[    13.254] (--) NVIDIA(0):     DFP-5
[    13.254] (--) NVIDIA(0):     DFP-6
[    13.254] (--) NVIDIA(0):     DFP-7
[    13.262] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 3090 (GA102-A) at PCI:5:0:0
[    13.262] (II) NVIDIA(G0):     (GPU-1)
[    13.262] (--) NVIDIA(G0): Memory: 25165824 kBytes
[    13.262] (--) NVIDIA(G0): VideoBIOS: 94.02.42.00.a9
[    13.262] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[    13.262] (--) NVIDIA(GPU-1): DFP-0: disconnected
[    13.262] (--) NVIDIA(GPU-1): DFP-0: Internal DisplayPort
[    13.262] (--) NVIDIA(GPU-1): DFP-0: 2670.0 MHz maximum pixel clock
[    13.262] (--) NVIDIA(GPU-1): 
[    13.262] (--) NVIDIA(GPU-1): DFP-1: disconnected
[    13.262] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[    13.262] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[    13.262] (--) NVIDIA(GPU-1): 
[    13.262] (--) NVIDIA(GPU-1): DFP-2: disconnected
[    13.262] (--) NVIDIA(GPU-1): DFP-2: Internal TMDS
[    13.262] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[    13.262] (--) NVIDIA(GPU-1): 
[    13.262] (--) NVIDIA(GPU-1): DFP-3: disconnected
[    13.262] (--) NVIDIA(GPU-1): DFP-3: Internal DisplayPort
[    13.262] (--) NVIDIA(GPU-1): DFP-3: 2670.0 MHz maximum pixel clock
[    13.262] (--) NVIDIA(GPU-1): 
[    13.263] (--) NVIDIA(GPU-1): DFP-4: disconnected
[    13.263] (--) NVIDIA(GPU-1): DFP-4: Internal TMDS
[    13.263] (--) NVIDIA(GPU-1): DFP-4: 165.0 MHz maximum pixel clock
[    13.263] (--) NVIDIA(GPU-1): 
[    13.263] (--) NVIDIA(GPU-1): DFP-5: disconnected
[    13.263] (--) NVIDIA(GPU-1): DFP-5: Internal TMDS
[    13.263] (--) NVIDIA(GPU-1): DFP-5: 165.0 MHz maximum pixel clock
[    13.263] (--) NVIDIA(GPU-1): 
[    13.263] (--) NVIDIA(GPU-1): DFP-6: disconnected
[    13.263] (--) NVIDIA(GPU-1): DFP-6: Internal DisplayPort
[    13.263] (--) NVIDIA(GPU-1): DFP-6: 2670.0 MHz maximum pixel clock
[    13.263] (--) NVIDIA(GPU-1): 
[    13.263] (--) NVIDIA(GPU-1): DFP-7: disconnected
[    13.263] (--) NVIDIA(GPU-1): DFP-7: Internal TMDS
[    13.263] (--) NVIDIA(GPU-1): DFP-7: 165.0 MHz maximum pixel clock
[    13.263] (--) NVIDIA(GPU-1): 
[    13.274] (II) NVIDIA(G0): Validated MetaModes:
[    13.274] (II) NVIDIA(G0):     "NULL"
[    13.274] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[    13.274] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[    13.274] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[    13.274] (II) UnloadModule: "modesetting"
[    13.274] (II) Unloading modesetting
[    13.287] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    13.287] (II) NVIDIA:     access.
[    13.303] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    13.303] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    13.303] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    13.303] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    13.303] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    13.303] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    13.303] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    13.303] (II) NVIDIA(0):     Config Options in the README.
[    13.322] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select"
[    13.428] (==) NVIDIA(0): Disabling shared memory pixmaps
[    13.428] (==) NVIDIA(0): Backing store enabled
[    13.428] (==) NVIDIA(0): Silken mouse enabled
[    13.428] (==) NVIDIA(0): DPMS enabled
[    13.429] (II) Loading sub module "dri2"
[    13.429] (II) LoadModule: "dri2"
[    13.429] (II) Module "dri2" already built-in
[    13.429] (II) NVIDIA(0): [DRI2] Setup complete
[    13.429] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    13.442] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    13.442] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X
[    13.442] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the
[    13.442] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will
[    13.442] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For
[    13.442] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and
[    13.442] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    13.442] (II) NVIDIA(G0):     Config Options in the README.
[    13.455] (II) NVIDIA(G0): Setting mode "NULL"
[    13.658] (==) NVIDIA(G0): Disabling shared memory pixmaps
[    13.658] (==) NVIDIA(G0): Backing store enabled
[    13.658] (==) NVIDIA(G0): Silken mouse enabled
[    13.658] (==) NVIDIA(G0): DPMS enabled
[    13.658] (II) Loading sub module "dri2"
[    13.658] (II) LoadModule: "dri2"
[    13.658] (II) Module "dri2" already built-in
[    13.658] (II) NVIDIA(G0): [DRI2] Setup complete
[    13.658] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[    13.658] (II) Initializing extension Generic Event Extension
[    13.658] (II) Initializing extension SHAPE
[    13.658] (II) Initializing extension MIT-SHM
[    13.659] (II) Initializing extension XInputExtension
[    13.659] (II) Initializing extension XTEST
[    13.659] (II) Initializing extension BIG-REQUESTS
[    13.659] (II) Initializing extension SYNC
[    13.659] (II) Initializing extension XKEYBOARD
[    13.659] (II) Initializing extension XC-MISC
[    13.659] (II) Initializing extension SECURITY
[    13.659] (II) Initializing extension XFIXES
[    13.659] (II) Initializing extension RENDER
[    13.659] (II) Initializing extension RANDR
[    13.659] (II) Initializing extension COMPOSITE
[    13.659] (II) Initializing extension DAMAGE
[    13.659] (II) Initializing extension MIT-SCREEN-SAVER
[    13.659] (II) Initializing extension DOUBLE-BUFFER
[    13.659] (II) Initializing extension RECORD
[    13.659] (II) Initializing extension DPMS
[    13.659] (II) Initializing extension Present
[    13.659] (II) Initializing extension DRI3
[    13.660] (II) Initializing extension X-Resource
[    13.660] (II) Initializing extension XVideo
[    13.660] (II) Initializing extension XVideo-MotionCompensation
[    13.660] (II) Initializing extension GLX
[    13.660] (II) Initializing extension GLX
[    13.660] (II) Indirect GLX disabled.
[    13.660] (II) GLX: Another vendor is already registered for screen 0
[    13.660] (II) Initializing extension XFree86-VidModeExtension
[    13.660] (II) Initializing extension XFree86-DGA
[    13.660] (II) Initializing extension XFree86-DRI
[    13.660] (II) Initializing extension DRI2
[    13.660] (II) Initializing extension NV-GLX
[    13.660] (II) Initializing extension NV-CONTROL
[    13.660] (II) Initializing extension XINERAMA
[    13.767] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    13.767] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.767] (II) LoadModule: "libinput"
[    13.767] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    13.770] (II) Module libinput: vendor="X.Org Foundation"
[    13.770] 	compiled for 1.21.1.13, module version = 1.5.0
[    13.770] 	Module class: X.Org XInput Driver
[    13.770] 	ABI class: X.Org XInput driver, version 24.4
[    13.770] (II) Using input driver 'libinput' for 'Power Button'
[    13.770] (**) Power Button: always reports core events
[    13.770] (**) Option "Device" "/dev/input/event1"
[    13.776] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    13.776] (II) event1  - Power Button: device is a keyboard
[    13.776] (II) event1  - Power Button: device removed
[    13.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    13.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    13.813] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    13.814] (II) event1  - Power Button: device is a keyboard
[    13.814] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    13.814] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.814] (II) Using input driver 'libinput' for 'Power Button'
[    13.814] (**) Power Button: always reports core events
[    13.814] (**) Option "Device" "/dev/input/event0"
[    13.815] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    13.815] (II) event0  - Power Button: device is a keyboard
[    13.815] (II) event0  - Power Button: device removed
[    13.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    13.846] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    13.847] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    13.847] (II) event0  - Power Button: device is a keyboard
[    13.848] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[    13.848] (II) No input driver specified, ignoring this device.
[    13.848] (II) This device may have been added with another device file.
[    13.848] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[    13.848] (II) No input driver specified, ignoring this device.
[    13.848] (II) This device may have been added with another device file.
[    13.848] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[    13.848] (II) No input driver specified, ignoring this device.
[    13.848] (II) This device may have been added with another device file.
[    13.849] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[    13.849] (II) No input driver specified, ignoring this device.
[    13.849] (II) This device may have been added with another device file.
[    13.849] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    13.849] (II) No input driver specified, ignoring this device.
[    13.849] (II) This device may have been added with another device file.
[    13.849] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    13.849] (II) No input driver specified, ignoring this device.
[    13.849] (II) This device may have been added with another device file.
[    13.850] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[    13.850] (II) No input driver specified, ignoring this device.
[    13.850] (II) This device may have been added with another device file.
[    13.850] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[    13.850] (II) No input driver specified, ignoring this device.
[    13.850] (II) This device may have been added with another device file.
[    13.850] (II) config/udev: Adding input device KBDFans DZ60 (/dev/input/event2)
[    13.850] (**) KBDFans DZ60: Applying InputClass "libinput keyboard catchall"
[    13.850] (II) Using input driver 'libinput' for 'KBDFans DZ60'
[    13.850] (**) KBDFans DZ60: always reports core events
[    13.850] (**) Option "Device" "/dev/input/event2"
[    13.851] (II) event2  - KBDFans DZ60: is tagged by udev as: Keyboard
[    13.851] (II) event2  - KBDFans DZ60: device is a keyboard
[    13.852] (II) event2  - KBDFans DZ60: device removed
[    13.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.0/0003:445A:2260.0001/input/input2/event2"
[    13.870] (II) XINPUT: Adding extended input device "KBDFans DZ60" (type: KEYBOARD, id 8)
[    13.871] (II) event2  - KBDFans DZ60: is tagged by udev as: Keyboard
[    13.871] (II) event2  - KBDFans DZ60: device is a keyboard
[    13.871] (II) config/udev: Adding input device KBDFans DZ60 Mouse (/dev/input/event3)
[    13.871] (**) KBDFans DZ60 Mouse: Applying InputClass "libinput pointer catchall"
[    13.871] (II) Using input driver 'libinput' for 'KBDFans DZ60 Mouse'
[    13.871] (**) KBDFans DZ60 Mouse: always reports core events
[    13.871] (**) Option "Device" "/dev/input/event3"
[    13.872] (II) event3  - KBDFans DZ60 Mouse: is tagged by udev as: Mouse
[    13.872] (II) event3  - KBDFans DZ60 Mouse: device is a pointer
[    13.873] (II) event3  - KBDFans DZ60 Mouse: device removed
[    13.913] (II) libinput: KBDFans DZ60 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    13.913] (II) libinput: KBDFans DZ60 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    13.913] (II) libinput: KBDFans DZ60 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    13.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:445A:2260.0002/input/input3/event3"
[    13.913] (II) XINPUT: Adding extended input device "KBDFans DZ60 Mouse" (type: MOUSE, id 9)
[    13.913] (**) Option "AccelerationScheme" "none"
[    13.913] (**) KBDFans DZ60 Mouse: (accel) selected scheme none/0
[    13.913] (**) KBDFans DZ60 Mouse: (accel) acceleration factor: 2.000
[    13.913] (**) KBDFans DZ60 Mouse: (accel) acceleration threshold: 4
[    13.914] (II) event3  - KBDFans DZ60 Mouse: is tagged by udev as: Mouse
[    13.914] (II) event3  - KBDFans DZ60 Mouse: device is a pointer
[    13.915] (II) config/udev: Adding input device KBDFans DZ60 Mouse (/dev/input/mouse0)
[    13.915] (II) No input driver specified, ignoring this device.
[    13.915] (II) This device may have been added with another device file.
[    13.915] (II) config/udev: Adding input device KBDFans DZ60 System Control (/dev/input/event4)
[    13.915] (**) KBDFans DZ60 System Control: Applying InputClass "libinput keyboard catchall"
[    13.915] (II) Using input driver 'libinput' for 'KBDFans DZ60 System Control'
[    13.915] (**) KBDFans DZ60 System Control: always reports core events
[    13.915] (**) Option "Device" "/dev/input/event4"
[    13.916] (II) event4  - KBDFans DZ60 System Control: is tagged by udev as: Keyboard
[    13.916] (II) event4  - KBDFans DZ60 System Control: device is a keyboard
[    13.917] (II) event4  - KBDFans DZ60 System Control: device removed
[    13.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:445A:2260.0002/input/input4/event4"
[    13.960] (II) XINPUT: Adding extended input device "KBDFans DZ60 System Control" (type: KEYBOARD, id 10)
[    13.961] (II) event4  - KBDFans DZ60 System Control: is tagged by udev as: Keyboard
[    13.961] (II) event4  - KBDFans DZ60 System Control: device is a keyboard
[    13.961] (II) config/udev: Adding input device KBDFans DZ60 Consumer Control (/dev/input/event5)
[    13.961] (**) KBDFans DZ60 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.961] (II) Using input driver 'libinput' for 'KBDFans DZ60 Consumer Control'
[    13.961] (**) KBDFans DZ60 Consumer Control: always reports core events
[    13.961] (**) Option "Device" "/dev/input/event5"
[    13.962] (II) event5  - KBDFans DZ60 Consumer Control: is tagged by udev as: Keyboard
[    13.962] (II) event5  - KBDFans DZ60 Consumer Control: device is a keyboard
[    13.963] (II) event5  - KBDFans DZ60 Consumer Control: device removed
[    13.983] (II) libinput: KBDFans DZ60 Consumer Control: needs a virtual subdevice
[    13.983] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:445A:2260.0002/input/input5/event5"
[    13.983] (II) XINPUT: Adding extended input device "KBDFans DZ60 Consumer Control" (type: MOUSE, id 11)
[    13.983] (**) Option "AccelerationScheme" "none"
[    13.983] (**) KBDFans DZ60 Consumer Control: (accel) selected scheme none/0
[    13.983] (**) KBDFans DZ60 Consumer Control: (accel) acceleration factor: 2.000
[    13.983] (**) KBDFans DZ60 Consumer Control: (accel) acceleration threshold: 4
[    13.984] (II) event5  - KBDFans DZ60 Consumer Control: is tagged by udev as: Keyboard
[    13.984] (II) event5  - KBDFans DZ60 Consumer Control: device is a keyboard
[    13.985] (II) config/udev: Adding input device KBDFans DZ60 Keyboard (/dev/input/event6)
[    13.985] (**) KBDFans DZ60 Keyboard: Applying InputClass "libinput keyboard catchall"
[    13.985] (II) Using input driver 'libinput' for 'KBDFans DZ60 Keyboard'
[    13.985] (**) KBDFans DZ60 Keyboard: always reports core events
[    13.985] (**) Option "Device" "/dev/input/event6"
[    13.986] (II) event6  - KBDFans DZ60 Keyboard: is tagged by udev as: Keyboard
[    13.986] (II) event6  - KBDFans DZ60 Keyboard: device is a keyboard
[    13.986] (II) event6  - KBDFans DZ60 Keyboard: device removed
[    14.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:445A:2260.0002/input/input6/event6"
[    14.016] (II) XINPUT: Adding extended input device "KBDFans DZ60 Keyboard" (type: KEYBOARD, id 12)
[    14.017] (II) event6  - KBDFans DZ60 Keyboard: is tagged by udev as: Keyboard
[    14.017] (II) event6  - KBDFans DZ60 Keyboard: device is a keyboard
[    14.018] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event7)
[    14.018] (**) Compx 2.4G Receiver: Applying InputClass "libinput keyboard catchall"
[    14.018] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver'
[    14.018] (**) Compx 2.4G Receiver: always reports core events
[    14.018] (**) Option "Device" "/dev/input/event7"
[    14.019] (II) event7  - Compx 2.4G Receiver: is tagged by udev as: Keyboard
[    14.019] (II) event7  - Compx 2.4G Receiver: device is a keyboard
[    14.019] (II) event7  - Compx 2.4G Receiver: device removed
[    14.043] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-4/5-4:1.0/0003:25A7:FA61.0003/input/input7/event7"
[    14.043] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver" (type: KEYBOARD, id 13)
[    14.044] (II) event7  - Compx 2.4G Receiver: is tagged by udev as: Keyboard
[    14.044] (II) event7  - Compx 2.4G Receiver: device is a keyboard
[    14.045] (II) config/udev: Adding input device Compx 2.4G Receiver Consumer Control (/dev/input/event10)
[    14.045] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    14.045] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control'
[    14.045] (**) Compx 2.4G Receiver Consumer Control: always reports core events
[    14.045] (**) Option "Device" "/dev/input/event10"
[    14.046] (II) event10 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[    14.046] (II) event10 - Compx 2.4G Receiver Consumer Control: device is a keyboard
[    14.046] (II) event10 - Compx 2.4G Receiver Consumer Control: device removed
[    14.070] (II) libinput: Compx 2.4G Receiver Consumer Control: needs a virtual subdevice
[    14.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-4/5-4:1.1/0003:25A7:FA61.0004/input/input10/event10"
[    14.070] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: MOUSE, id 14)
[    14.070] (**) Option "AccelerationScheme" "none"
[    14.070] (**) Compx 2.4G Receiver Consumer Control: (accel) selected scheme none/0
[    14.070] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration factor: 2.000
[    14.070] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration threshold: 4
[    14.071] (II) event10 - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[    14.071] (II) event10 - Compx 2.4G Receiver Consumer Control: device is a keyboard
[    14.071] (II) config/udev: Adding input device Compx 2.4G Receiver System Control (/dev/input/event11)
[    14.071] (**) Compx 2.4G Receiver System Control: Applying InputClass "libinput keyboard catchall"
[    14.071] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver System Control'
[    14.071] (**) Compx 2.4G Receiver System Control: always reports core events
[    14.071] (**) Option "Device" "/dev/input/event11"
[    14.072] (II) event11 - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard
[    14.072] (II) event11 - Compx 2.4G Receiver System Control: device is a keyboard
[    14.073] (II) event11 - Compx 2.4G Receiver System Control: device removed
[    14.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-4/5-4:1.1/0003:25A7:FA61.0004/input/input11/event11"
[    14.096] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver System Control" (type: KEYBOARD, id 15)
[    14.097] (II) event11 - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard
[    14.097] (II) event11 - Compx 2.4G Receiver System Control: device is a keyboard
[    14.098] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/event8)
[    14.098] (**) Compx 2.4G Receiver Mouse: Applying InputClass "libinput pointer catchall"
[    14.098] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse'
[    14.098] (**) Compx 2.4G Receiver Mouse: always reports core events
[    14.098] (**) Option "Device" "/dev/input/event8"
[    14.099] (II) event8  - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse
[    14.099] (II) event8  - Compx 2.4G Receiver Mouse: device is a pointer
[    14.099] (II) event8  - Compx 2.4G Receiver Mouse: device removed
[    14.163] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.163] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.163] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    14.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-4/5-4:1.1/0003:25A7:FA61.0004/input/input8/event8"
[    14.163] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Mouse" (type: MOUSE, id 16)
[    14.163] (**) Option "AccelerationScheme" "none"
[    14.163] (**) Compx 2.4G Receiver Mouse: (accel) selected scheme none/0
[    14.163] (**) Compx 2.4G Receiver Mouse: (accel) acceleration factor: 2.000
[    14.163] (**) Compx 2.4G Receiver Mouse: (accel) acceleration threshold: 4
[    14.164] (II) event8  - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse
[    14.164] (II) event8  - Compx 2.4G Receiver Mouse: device is a pointer
[    14.165] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/mouse1)
[    14.165] (II) No input driver specified, ignoring this device.
[    14.165] (II) This device may have been added with another device file.
[    14.165] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event9)
[    14.165] (II) No input driver specified, ignoring this device.
[    14.165] (II) This device may have been added with another device file.
[    14.166] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event22)
[    14.166] (II) No input driver specified, ignoring this device.
[    14.166] (II) This device may have been added with another device file.
[    14.166] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event23)
[    14.166] (II) No input driver specified, ignoring this device.
[    14.166] (II) This device may have been added with another device file.
[    14.166] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event24)
[    14.166] (II) No input driver specified, ignoring this device.
[    14.166] (II) This device may have been added with another device file.
[    14.166] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event25)
[    14.166] (II) No input driver specified, ignoring this device.
[    14.166] (II) This device may have been added with another device file.
[    14.167] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event26)
[    14.167] (II) No input driver specified, ignoring this device.
[    14.167] (II) This device may have been added with another device file.
[    14.167] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event27)
[    14.167] (II) No input driver specified, ignoring this device.
[    14.167] (II) This device may have been added with another device file.
[    14.167] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event28)
[    14.167] (II) No input driver specified, ignoring this device.
[    14.167] (II) This device may have been added with another device file.
[    14.167] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13)
[    14.167] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    14.167] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    14.167] (**) Eee PC WMI hotkeys: always reports core events
[    14.167] (**) Option "Device" "/dev/input/event13"
[    14.168] (II) event13 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    14.168] (II) event13 - Eee PC WMI hotkeys: device is a keyboard
[    14.168] (II) event13 - Eee PC WMI hotkeys: device removed
[    14.226] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input14/event13"
[    14.226] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 17)
[    14.227] (II) event13 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    14.227] (II) event13 - Eee PC WMI hotkeys: device is a keyboard
[    14.227] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[    14.227] (II) No input driver specified, ignoring this device.
[    14.227] (II) This device may have been added with another device file.
[    14.234] (**) KBDFans DZ60 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    14.234] (II) Using input driver 'libinput' for 'KBDFans DZ60 Consumer Control'
[    14.234] (**) KBDFans DZ60 Consumer Control: always reports core events
[    14.234] (**) Option "Device" "/dev/input/event5"
[    14.234] (II) libinput: KBDFans DZ60 Consumer Control: is a virtual subdevice
[    14.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:445A:2260.0002/input/input5/event5"
[    14.234] (II) XINPUT: Adding extended input device "KBDFans DZ60 Consumer Control" (type: KEYBOARD, id 18)
[    14.234] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    14.234] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control'
[    14.234] (**) Compx 2.4G Receiver Consumer Control: always reports core events
[    14.234] (**) Option "Device" "/dev/input/event10"
[    14.234] (II) libinput: Compx 2.4G Receiver Consumer Control: is a virtual subdevice
[    14.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-4/5-4:1.1/0003:25A7:FA61.0004/input/input10/event10"
[    14.234] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: KEYBOARD, id 19)
[    21.161] (II) event1  - Power Button: device removed
[    21.190] (II) event0  - Power Button: device removed
[    21.210] (II) event2  - KBDFans DZ60: device removed
[    21.240] (II) event3  - KBDFans DZ60 Mouse: device removed
[    21.296] (II) event4  - KBDFans DZ60 System Control: device removed
[    21.323] (II) event6  - KBDFans DZ60 Keyboard: device removed
[    21.350] (II) event7  - Compx 2.4G Receiver: device removed
[    21.376] (II) event11 - Compx 2.4G Receiver System Control: device removed
[    21.403] (II) event8  - Compx 2.4G Receiver Mouse: device removed
[    21.446] (II) event13 - Eee PC WMI hotkeys: device removed
[    21.533] (II) event5  - KBDFans DZ60 Consumer Control: device removed
[    21.586] (II) event10 - Compx 2.4G Receiver Consumer Control: device removed

Offline

#8 2024-10-29 15:34:49

seth
Member
Registered: 2012-09-03
Posts: 59,045

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

You're currently running on the GPU on BusID "PCI:11:0:0", the GPU on BusID "PCI:5:0:0" is available fro prime offloading.
The posted config would preserve that setup, but inactivate the second GPU (hopefully)

Stupid question, what happens if you plug the monitor into the other GPU?
(W/o that config!)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2024-10-29 17:18:52

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

seth wrote:

Stupid question, what happens if you plug the monitor into the other GPU?
(W/o that config!)

Wow, not a stupid question. I plugged my monitor into the second GPU, rebooted, and it just works. It being vkcube, games, rendering, etc. That's all I needed to do! Thank you.

Offline

#10 2024-10-29 19:47:36

seth
Member
Registered: 2012-09-03
Posts: 59,045

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

Are both PCI slots equal (PEGs)?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2024-10-30 12:57:02

cryptearth
Member
Registered: 2024-02-03
Posts: 1,016

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

lonelygarden wrote:
seth wrote:

Stupid question, what happens if you plug the monitor into the other GPU?
(W/o that config!)

Wow, not a stupid question. I plugged my monitor into the second GPU, rebooted, and it just works. It being vkcube, games, rendering, etc. That's all I needed to do! Thank you.

well - as mentioned: SLI (and crossfire for that matter) are a thing ofvthe past and no longer support
and although what you tried is a bit different to how multi-gpu used to work it comes down to you tried to use the secondary gpu to render but output the image through the primary one - and this is what's no longer supppported and hence causes issues
sure you can multiple gpus - but all on thier own with thier oen screens attached - hence my question on what you want to use the 2nd gpu for in the first place
so, as seth put it: your use case is to use the 2nd gpu as an accelerator only but not for active rendering to the screen, correct? what motherboard do you use? does it even provide 2 full x16 4.0 slots - aka a workstation board based on xeon or threadripper/epyc? or is this just some consumer grade hardware with one primary PEG slot and the others are just some additional provided by the chipset?
anyhow I would try to isolate the 2nd gpu (which can be a bit tricky as you use two identical ones) and enclave it in a container or vm and redirect whatever you want to use it for to that
also: to be effective in any way you want to use both gpus at once - just using the 2nd gpu for that AI stuff while your primary is idle or used for gaming is somewhat wasting - as you already have a 2nd gpu I recommend building an entire 2nd system for a couple 100 quit to fully utilize the power of that 2nd gpu - otherwise I would try to sell it as you waste it's potential - maybe because you not really understand your planed workflow yourself

Offline

#12 2024-10-30 19:19:44

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

seth wrote:

Are both PCI slots equal (PEGs)?

It's not. They're split in 16x/4x slots right now for better cooling/noise, but I can just move the card to make it 8x/8x.

Also I need the 48GB VRAM in both cards combined to load LLMs. The PCIe bandwidth isn't as much an issue as not being able to load an entire model into VRAM since you're pretty limited on models that fit into 24GB. It is definitely not an ideal workstation setup, it's just my personal desktop that I slapped more (relatively) cheap VRAM into.

Offline

#13 2024-10-30 19:34:22

seth
Member
Registered: 2012-09-03
Posts: 59,045

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

The GPU that works is in the 16x slot?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#14 2024-10-30 19:47:46

lonelygarden
Member
Registered: 2024-10-29
Posts: 6

Re: [SOLVED] Vulkan driver not working in computer with 2 GPUs

seth wrote:

The GPU that works is in the 16x slot?

No, the GPU that works is in the 4x slot at the moment.

Offline

Pages: 1

Board footer

Powered by FluxBB