How to enable a microphone?

Nucleo · 2024-11-12 12:14:53

My laptops mic is picked up by KDE but it is blackened out, i cant seem to select it. i am using gnome-sound recorder for it.

The Audio Controller is blackened out for Selection "Analog Stereo Duplex"
it has no entry when in selection "Analog Stereo Output" //Possibly only for output not sure
and for selection "Pro Audio" it activates but as soon as i record it switches back to headphone mic.

is there a systemctl command to enable some stuff? or a mic controller?

i dont know how to post images here, if you could tell me i could show you the KDE Settings page.
https://imgur.com/a/U1UuQnW

Last edited by Nucleo (2024-11-12 12:41:45)

V1del · 2024-11-12 12:23:01

I'm not following what your issue is. If you want to post screenshots load them to imgur or so and post the link here.

Can you also post the outputs of

sudo fuser -v /dev/snd/*
arecord -l
pactl list cards
pactl list sources

wrapped in [ code ] [ /code] tags without the spaces

From what I can piece together the device is present? But not selectable? in gnome-sound-recorder or in the KDE applet or where?

Last edited by V1del (2024-11-12 12:24:19)

Nucleo · 2024-11-12 12:47:13

V1del wrote:

I'm not following what your issue is. If you want to post screenshots load them to imgur or so and post the link here.
Can you also post the outputs of
sudo fuser -v /dev/snd/*
arecord -l
pactl list cards
pactl list sources
wrapped in [ code ] [ /code] tags without the spaces
From what I can piece together the device is present? But not selectable? in gnome-sound-recorder or in the KDE applet or where?

it is not selectable in KDE Settings.

sudo fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  nucleo      852 F.... wireplumber
/dev/snd/controlC1:  nucleo      852 F.... wireplumber
/dev/snd/controlC2:  nucleo      852 F.... wireplumber
/dev/snd/seq:        nucleo      851 F.... pipewire

arecord -l

arecord  : command not found

pactl list cards

Card #42
	Name: alsa_card.pci-0000_01_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 56"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hw:0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:01:00.1"
		device.description = "HDA NVidia"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "5794233"
		device.product.id = "0x2291"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "41"
		object.id = "42"
		object.serial = "42"
		object.path = "alsa:acp:NVidia"
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 56"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU a0 HDMI/DP"
		alsa.components = "HDA:10de00a0,14621437,00100100"
		alsa.id = "NVidia"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: yes)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: yes)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
				device.product.name = "HDMI"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #43
	Name: alsa_card.pci-0000_05_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c8000 irq 80"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.1"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5794193"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "41"
		object.id = "43"
		object.serial = "43"
		object.path = "alsa:acp:Generic"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 80"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.id = "Generic"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: pro-audio
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #44
	Name: alsa_card.pci-0000_05_00.6
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c0000 irq 81"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.6"
		device.description = "Family 17h/19h HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5858643"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "41"
		object.id = "44"
		object.serial = "44"
		object.path = "alsa:acp:Generic_1"
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 81"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC256"
		alsa.components = "HDA:10ec0256,14621437,00100002"
		alsa.id = "Generic_1"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: output:analog-stereo+input:analog-stereo
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
			Properties:
				port.type = "speaker"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-speakers"
				card.profile.port = "1"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 3"
				device.icon_name = "audio-headphones"
				card.profile.port = "2"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #118
	Name: bluez_card.BE_46_42_8C_90_A5
	Driver: module-bluez5-device.c
	Owner Module: n/a
	Properties:
		api.bluez5.address = "BE:46:42:8C:90:A5"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "connected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "1"
		api.bluez5.path = "/org/bluez/hci0/dev_BE_46_42_8C_90_A5"
		bluez5.profile = "off"
		device.alias = "Boult Audio Q"
		device.api = "bluez5"
		device.bus = "bluetooth"
		device.description = "Boult Audio Q"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.BE_46_42_8C_90_A5"
		device.product.id = "0x000a"
		device.string = "BE:46:42:8C:90:A5"
		device.vendor.id = "bluetooth:05d6"
		media.class = "Audio/Device"
		factory.id = "15"
		client.id = "41"
		object.id = "76"
		object.serial = "118"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		a2dp-sink-sbc: High Fidelity Playback (A2DP Sink, codec SBC) (sinks: 1, sources: 0, priority: 18, available: yes)
		a2dp-sink-sbc_xq: High Fidelity Playback (A2DP Sink, codec SBC-XQ) (sinks: 1, sources: 0, priority: 17, available: yes)
		a2dp-sink: High Fidelity Playback (A2DP Sink, codec AAC) (sinks: 1, sources: 0, priority: 19, available: yes)
		headset-head-unit-cvsd: Headset Head Unit (HSP/HFP, codec CVSD) (sinks: 1, sources: 1, priority: 2, available: yes)
		headset-head-unit: Headset Head Unit (HSP/HFP, codec mSBC) (sinks: 1, sources: 1, priority: 3, available: yes)
	Active Profile: a2dp-sink
	Ports:
		headset-input: Handsfree (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): headset-head-unit-cvsd, headset-head-unit
		headset-output: Headset (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): a2dp-sink-sbc, a2dp-sink-sbc_xq, a2dp-sink
		headset-hf-output: Handsfree (type: Headset, priority: 0, latency offset: 0 usec, available)
			Properties:
				port.type = "headset"
			Part of profile(s): headset-head-unit-cvsd, headset-head-unit

pactl list sources

Source #63
	State: SUSPENDED
	Name: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
	Description: Monitor of HDA NVidia Digital Stereo (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.class = "generic"
		alsa.components = "HDA:10de00a0,14621437,00100100"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 56"
		alsa.mixer_name = "Nvidia GPU a0 HDMI/DP"
		alsa.name = "HDMI 0"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 56"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hdmi:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "42"
		device.profile.description = "Digital Stereo (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "HDA NVidia"
		node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
		node.nick = "HDMI 0"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:NVidia:4:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "51"
		object.serial = "63"
		api.acp.auto-port = "false"
		api.alsa.card = "0"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:01:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_01_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "5794233"
		device.product.id = "0x2291"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		device.string = "0"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Source #120
	State: SUSPENDED
	Name: bluez_input.BE:46:42:8C:90:A5
	Description: Boult Audio Q
	Driver: PipeWire
	Sample Specification: float32le 1ch 48000Hz
	Channel Map: mono
	Owner Module: 4294967295
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: DECIBEL_VOLUME LATENCY
	Properties:
		node.name = "bluez_input.BE:46:42:8C:90:A5"
		audio.position = "[MONO]"
		priority.driver = "2010"
		device.description = "Boult Audio Q"
		filter.smart.target = "{\"bluez5.loopback\":false, \"bluez5.loopback-target\":true, \"device.id\":76}"
		device.id = "76"
		filter.smart = "true"
		media.class = "Audio/Source"
		bluez5.loopback = "true"
		priority.session = "2010"
		card.profile.device = "0"
		node.group = "loopback-852-18"
		node.link-group = "loopback-852-18"
		node.virtual = "true"
		resample.prefill = "true"
		resample.disable = "true"
		media.name = "Boult Audio Q output"
		stream.is-live = "true"
		node.want-driver = "true"
		node.autoconnect = "true"
		node.trigger = "true"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "12"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "83"
		object.id = "82"
		object.serial = "120"
		api.bluez5.address = "BE:46:42:8C:90:A5"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "connected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "1"
		api.bluez5.path = "/org/bluez/hci0/dev_BE_46_42_8C_90_A5"
		bluez5.profile = "off"
		device.alias = "Boult Audio Q"
		device.api = "bluez5"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.BE_46_42_8C_90_A5"
		device.product.id = "0x000a"
		device.string = "BE:46:42:8C:90:A5"
		device.vendor.id = "bluetooth:05d6"
	Formats:
		pcm

Source #491
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.pro-output-3.monitor
	Description: Monitor of Rembrandt Radeon High Definition Audio Controller Pro
	Driver: PipeWire
	Sample Specification: s32le 8ch 48000Hz
	Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.1.pro-output-3
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 80"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.name = "HDMI 0"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c8000 irq 80"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1,3"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "8"
		audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
		card.profile.device = "0"
		clock.name = "api.alsa.1"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "43"
		device.profile.description = "Pro"
		device.profile.name = "pro-output-3"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_05_00.1.pro-output-3"
		node.nick = "HDMI 0"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:0:playback"
		port.group = "playback"
		priority.driver = "1196"
		priority.session = "1196"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "106"
		object.serial = "491"
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5794193"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.string = "1"
	Formats:
		pcm

Source #492
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.pro-output-7.monitor
	Description: Monitor of Rembrandt Radeon High Definition Audio Controller Pro 7
	Driver: PipeWire
	Sample Specification: s32le 8ch 48000Hz
	Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.1.pro-output-7
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.device = "7"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 1"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 80"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.name = "HDMI 1"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c8000 irq 80"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1,7"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "8"
		audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
		card.profile.device = "1"
		clock.name = "api.alsa.1"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "43"
		device.profile.description = "Pro 7"
		device.profile.name = "pro-output-7"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_05_00.1.pro-output-7"
		node.nick = "HDMI 1"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:1:playback"
		port.group = "playback"
		priority.driver = "1132"
		priority.session = "1132"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "103"
		object.serial = "492"
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5794193"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.string = "1"
	Formats:
		pcm

Source #493
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.pro-output-8.monitor
	Description: Monitor of Rembrandt Radeon High Definition Audio Controller Pro 8
	Driver: PipeWire
	Sample Specification: s32le 8ch 48000Hz
	Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.1.pro-output-8
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.device = "8"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 2"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 80"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.name = "HDMI 2"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c8000 irq 80"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1,8"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "8"
		audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
		card.profile.device = "2"
		clock.name = "api.alsa.1"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "43"
		device.profile.description = "Pro 8"
		device.profile.name = "pro-output-8"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_05_00.1.pro-output-8"
		node.nick = "HDMI 2"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:2:playback"
		port.group = "playback"
		priority.driver = "1116"
		priority.session = "1116"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "107"
		object.serial = "493"
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5794193"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.string = "1"
	Formats:
		pcm

Source #494
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.1.pro-output-9.monitor
	Description: Monitor of Rembrandt Radeon High Definition Audio Controller Pro 9
	Driver: PipeWire
	Sample Specification: s32le 8ch 48000Hz
	Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
	Owner Module: 4294967295
	Mute: no
	Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.1.pro-output-9
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.device = "9"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 3"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c8000 irq 80"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.name = "HDMI 3"
		alsa.resolution_bits = "32"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c8000 irq 80"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1,9"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "8"
		audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
		card.profile.device = "3"
		clock.name = "api.alsa.1"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "43"
		device.profile.description = "Pro 9"
		device.profile.name = "pro-output-9"
		device.profile.pro = "true"
		device.routes = "0"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Rembrandt Radeon High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_05_00.1.pro-output-9"
		node.nick = "HDMI 3"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:3:playback"
		port.group = "playback"
		priority.driver = "1100"
		priority.session = "1100"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "102"
		object.serial = "494"
		api.acp.auto-port = "false"
		api.alsa.card = "1"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.1"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5794193"
		device.product.id = "0x1640"
		device.product.name = "Rembrandt Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.string = "1"
	Formats:
		pcm

Source #833
	State: SUSPENDED
	Name: bluez_output.BE_46_42_8C_90_A5.1.monitor
	Description: Monitor of Boult Audio Q
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 0 /   0% / -inf dB,   front-right: 0 /   0% / -inf dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: bluez_output.BE_46_42_8C_90_A5.1
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		api.bluez5.address = "BE:46:42:8C:90:A5"
		api.bluez5.codec = "aac"
		api.bluez5.profile = "a2dp-sink"
		api.bluez5.transport = ""
		bluez5.loopback = "false"
		card.profile.device = "1"
		device.id = "76"
		device.routes = "1"
		factory.name = "api.bluez5.a2dp.sink"
		device.description = "Boult Audio Q"
		node.name = "bluez_output.BE_46_42_8C_90_A5.1"
		node.pause-on-idle = "false"
		priority.driver = "1010"
		priority.session = "1010"
		factory.id = "12"
		clock.quantum-limit = "8192"
		device.api = "bluez5"
		media.class = "Audio/Sink"
		media.name = "Boult Audio Q"
		node.driver = "true"
		port.group = "stream.0"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "85"
		object.serial = "833"
		client.id = "41"
		api.bluez5.class = "0x240404"
		api.bluez5.connection = "connected"
		api.bluez5.device = ""
		api.bluez5.icon = "audio-headset"
		api.bluez5.id = "1"
		api.bluez5.path = "/org/bluez/hci0/dev_BE_46_42_8C_90_A5"
		bluez5.profile = "off"
		device.alias = "Boult Audio Q"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		device.icon_name = "audio-headset-bluetooth"
		device.name = "bluez_card.BE_46_42_8C_90_A5"
		device.product.id = "0x000a"
		device.string = "BE:46:42:8C:90:A5"
		device.vendor.id = "bluetooth:05d6"
		device.class = "monitor"
	Ports:
		headset-output: Headset (type: Headset, priority: 0, available)
	Active Port: headset-output
	Formats:
		pcm

Source #873
	State: SUSPENDED
	Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
	Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0256,14621437,00100002"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC256 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 81"
		alsa.mixer_name = "Realtek ALC256"
		alsa.name = "ALC256 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c0000 irq 81"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "3"
		device.api = "alsa"
		device.class = "monitor"
		device.id = "44"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_output.pci-0000_05_00.6.analog-stereo"
		node.nick = "ALC256 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic_1:3:playback"
		port.group = "playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "52"
		object.serial = "873"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5858643"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability group: Legacy 2, availability unknown)
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 3, not available)
	Active Port: analog-output-speaker
	Formats:
		pcm

Source #874
	State: SUSPENDED
	Name: alsa_input.pci-0000_05_00.6.analog-stereo
	Description: Family 17h/19h HD Audio Controller Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0256,14621437,00100002"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC256 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xfc5c0000 irq 81"
		alsa.mixer_name = "Realtek ALC256"
		alsa.name = "ALC256 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc5c0000 irq 81"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.id = "44"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Family 17h/19h HD Audio Controller"
		node.name = "alsa_input.pci-0000_05_00.6.analog-stereo"
		node.nick = "ALC256 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic_1:0:capture"
		port.group = "capture"
		priority.driver = "2009"
		priority.session = "2009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "41"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "163"
		object.serial = "874"
		api.acp.auto-port = "false"
		api.alsa.card = "2"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:05:00.6"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_05_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5858643"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.string = "2"
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, availability group: Legacy 1, not available)
	Active Port: analog-input-mic
	Formats:
		pcm

V1del · 2024-11-12 17:59:09

Mhm... that's usually a bug in pipewire configuration, or some kernel jack detection issues. You didn't create configuration for modprobe to the likes of dmic_detect=0 or snd-intel-dspcfg.dsp_driver=1 did you?

Can you install alsa-utils, repost the

arecord -l
# This doesn't record audio?
parecord -d  alsa_input.pci-0000_05_00.6.analog-stereo test.wav
# Or this?
arecord -Dhw:2,0 test_alsa.wav

Nucleo · 2024-11-12 20:32:27

V1del wrote:

Mhm... that's usually a bug in pipewire configuration, or some kernel jack detection issues. You didn't create configuration for modprobe to the likes of dmic_detect=0 or snd-intel-dspcfg.dsp_driver=1 did you?
Can you install alsa-utils, repost the
arecord -l
# This doesn't record audio?
parecord -d  alsa_input.pci-0000_05_00.6.analog-stereo test.wav
# Or this?
arecord -Dhw:2,0 test_alsa.wav

I did not do any configuration for pipewire, i did try to once uninstall it to replace it with pulseaudio, but it was being used so it didnt actually do anything(i hope)

arecord -l

**** List of CAPTURE Hardware Devices ****
card 2: Generic_1 [HD-Audio Generic], device 0: ALC256 Analog [ALC256 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

parecord -d alsa_input.pci-0000_05_00.6.analog-stereo test.wav

records but no sound captured

arecord -Dhw:2,0 test_alsa.wav

Warning: Some sources (like microphones) may produce inaudible results
         with 8-bit sampling. Use '-f' argument to increase resolution
         e.g. '-f S16_LE'.
arecord: set_params:1387: Sample format non available
Available formats:
- S16_LE
- S32_LE

V1del · 2024-11-12 21:26:30

Try taking it up on the offer and change the command to

arecord -Dhw:2,0 -f S16_LE test_alsa.wav

if no permutation of the ALSA command works you're looking at kernel issues most likely, what's the exact laptop model?

Nucleo · 2024-11-13 04:32:41

V1del wrote:

Try taking it up on the offer and change the command to
arecord -Dhw:2,0 -f S16_LE test_alsa.wav
if no permutation of the ALSA command works you're looking at kernel issues most likely, what's the exact laptop model?

The laptop model is MSI Thin A15 b16ucx

arecord -Dhw:2,0 -f S16_LE test_alsa.wav

arecord: set_params:1398: Channels count non available

V1del · 2024-11-13 12:34:20

grml...

arecord -Dhw:2,0 -f S16_LE -c 1 -r 48000 test_alsa.wav

Arch Linux

#1 2024-11-12 12:14:53

How to enable a microphone?

#2 2024-11-12 12:23:01

Re: How to enable a microphone?

#3 2024-11-12 12:47:13

Re: How to enable a microphone?

#4 2024-11-12 17:59:09

Re: How to enable a microphone?

#5 2024-11-12 20:32:27

Re: How to enable a microphone?

#6 2024-11-12 21:26:30

Re: How to enable a microphone?

#7 2024-11-13 04:32:41

Re: How to enable a microphone?

#8 2024-11-13 12:34:20

Re: How to enable a microphone?

Board footer