You are not logged in.
After changing my laptop battery out I now have no sound.
I looked at all the connector cables . They seem to be connected .
Not sure what happened.
I printed this from the journal.
Let me know if you need a whole journal.
Nov 26 02:56:47 archlinux systemd[738]: Started Sound Service.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to find a working profile.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci>
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to find a working profile.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci>
Nov 26 02:56:47 archlinux systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to find a working profile.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci>
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to find a working profile.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci>
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to find a working profile.
Nov 26 02:56:47 archlinux pulseaudio[892]: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci>
Nov 26 02:56:47 archlinux pulseaudio[892]: Tried to configure /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/soun>
This is the laptop:
[demo@archlinux ~]$ inxi -Faaz
System:
Kernel: 6.12.1-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=91f4ccdf-2376-48ab-a390-91ea0bc4b02a rw loglevel=3
nvidia_drm.modeset=1 fbcon=font:TER16x32 vt.color=0x17
Desktop: KDE Plasma v: 6.2.3 tk: Qt v: N/A info: frameworks v: 6.8.0
wm: kwin_wayland tools: xscreensaver,xscreensaver-systemd
avail: swayidle,swaylock vt: 1 dm: SDDM Distro: Arch Linux
Machine:
Type: Convertible System: HP product: HP Spectre x360 Convertible 15-df1xxx
v: N/A serial: <superuser required> Chassis: type: 31
serial: <superuser required>
Mobo: HP model: 863F v: 54.24 serial: <superuser required>
part-nu: 7UT64UA#ABA uuid: <superuser required> UEFI: AMI v: F.32
date: 12/08/2023
Battery:
ID-1: BAT0 charge: 89.1 Wh (100.0%) condition: 89.1/89.1 Wh (100.0%)
volts: 13.1 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: full
CPU:
Info: model: Intel Core i7-10510U bits: 64 type: MT MCP
arch: Comet/Whiskey Lake note: check gen: core 10 level: v3 note: check
built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 0xC (12) microcode: 0xFC
Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 threads: 8 tpc: 2
smt: enabled cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB
desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 3300 min/max: 400/4900 scaling: driver: intel_pstate
governor: powersave cores: 1: 3300 2: 3300 3: 3300 4: 3300 5: 3300 6: 3300
7: 3300 8: 3300 bogomips: 36812
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: Enhanced IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; RSB filling; PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW
loop
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:9b41
class-ID: 0300
Device-2: NVIDIA GP108M [GeForce MX250] vendor: Hewlett-Packard
driver: nvidia v: 565.57.01 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-09; EOL~2026-12-xx) arch: Pascal code: GP10x
process: TSMC 16nm built: 2016-2021 pcie: gen: 3 speed: 8 GT/s lanes: 4
bus-ID: 3b:00.0 chip-ID: 10de:1d13 class-ID: 0302
Device-3: Generic HP Wide Vision FHD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:2 chip-ID: 04f2:b67b
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.14 with: Xwayland v: 24.1.4
compositor: kwin_wayland driver: X: loaded: modesetting,nvidia
alternate: fbdev,intel,nouveau,nv,vesa dri: iris gpu: i915,nvidia
display-ID: 0
Monitor-1: eDP-1 res: 1707x960 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 2 drv: iris device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia wayland: drv: iris x11: drv: iris
inactive: device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 565.57.01
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce MX250/PCIe/SSE2
memory: 1.95 GiB display-ID: :0.0
API: Vulkan v: 1.3.295 layers: 1 device: 0 type: discrete-gpu
name: NVIDIA GeForce MX250 driver: nvidia v: 565.57.01 device-ID: 10de:1d13
surfaces: xcb,xlib,wayland
Audio:
Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_avs,
snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:02c8 class-ID: 0401
API: ALSA v: k6.12.1-arch1-1 status: kernel-api
tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.2.6 status: off with: pipewire-media-session
status: active tools: pw-cli
Server-4: PulseAudio v: 17.0 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Drives:
Local Storage: total: 931.51 GiB used: 49.22 GiB (5.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 2B2QEXM7 temp: 44.9 C scheme: GPT
Partition:
ID-1: / raw-size: 57 GiB size: 55.93 GiB (98.12%) used: 49.15 GiB (87.9%)
fs: ext4 dev: /dev/nvme0n1p9 maj-min: 259:9
ID-2: /boot/efi raw-size: 499 MiB size: 498 MiB (99.80%)
used: 72.1 MiB (14.5%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 67.0 C pch: 63.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 15.26 GiB used: 3.1 GiB (20.3%)
Processes: 250 Power: uptime: 28m states: freeze,mem,disk suspend: s2idle
wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume
image: 6.04 GiB services: org_kde_powerdevil,upowerd Init: systemd v: 256
default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1106 libs: 234 tools: yay Compilers:
gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: alacritty inxi: 3.3.36
Don't know if this helps:
[demo@archlinux ~]$ pacmd list
Memory blocks currently allocated: 2, size: 120.3 KiB.
Memory blocks allocated during the whole lifetime: 7, size: 289.5 KiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 56.4 KiB.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: auto_null
Default source name: auto_null.monitor
Memory blocks of type POOL: 2 allocated/3 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/0 accumulated.
Memory blocks of type IMPORTED: 0 allocated/4 accumulated.
23 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "17.0"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "17.0"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "17.0"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "17.0"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "17.0"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "17.0"
index: 7
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "17.0"
index: 8
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "17.0"
index: 9
name: <module-gsettings>
argument: <>
used: -1
load once: yes
properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "17.0"
index: 10
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "17.0"
index: 11
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "17.0"
index: 12
name: <module-null-sink>
argument: <sink_name=auto_null sink_properties='device.description="Dummy Output"'>
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Clocked NULL sink"
module.version = "17.0"
index: 13
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "17.0"
index: 14
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "17.0"
index: 15
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "17.0"
index: 16
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "17.0"
index: 17
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "17.0"
index: 18
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "17.0"
index: 19
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "17.0"
index: 25
name: <module-x11-publish>
argument: <display=:0 xauthority=/run/user/1000/xauth_JnurAb>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "17.0"
index: 26
name: <module-x11-cork-request>
argument: <display=:0 xauthority=/run/user/1000/xauth_JnurAb>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when cork/uncork is requested"
module.version = "17.0"
index: 27
name: <module-x11-publish>
argument: <display=:0 xauthority=/run/user/1000/xauth_JnurAb>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "17.0"
index: 29
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "17.0"
1 sink(s) available.
* index: 0
name: <auto_null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 344 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
module: 12
properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
1 source(s) available.
* index: 0
name: <auto_null.monitor>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 0
module: 12
properties:
device.description = "Monitor of Dummy Output"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
8 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 15
properties:
application.name = "Login Session 4"
systemd-login.session = "4"
index: 1
driver: <module-systemd-login.c>
owner module: 15
properties:
application.name = "Login Session 3"
systemd-login.session = "3"
index: 4
driver: <protocol-native.c>
owner module: 8
properties:
application.name = ""
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.kded6"
application.icon_name = ""
application.process.id = "914"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "kded6"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
index: 5
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "914"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "kded6"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
index: 6
driver: <protocol-native.c>
owner module: 8
properties:
application.name = ""
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.kde.plasma-pa"
application.icon_name = ""
application.process.id = "952"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
index: 7
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "952"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
index: 12
driver: <protocol-native.c>
owner module: 8
properties:
application.name = "KMix"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "1237"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "kmix"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
index: 14
driver: <cli.c>
owner module: 29
properties:
application.name = "UNIX socket client"
0 card(s) available.
0 sink input(s) available.
0 source output(s) available.
1 cache entrie(s) available.
name: <audio-volume-change>
index: 0
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
length: 57744
duration: 0.3 s
volume: n/a
balance 0.00
lazy: no
filename: <n/a>
properties:
media.role = "event"
event.id = "audio-volume-change"
event.description = "Volume Control Feedback Sound"
media.name = "audio-volume-change"
media.filename = "/usr/share/sounds/ocean/stereo/audio-volume-change.oga"
application.name = "libcanberra"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.version = "0.30"
application.id = "org.freedesktop.libcanberra"
application.process.id = "952"
application.process.user = "demo"
application.process.host = "archlinux"
application.process.binary = "plasmashell"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "57cff30757e244e493c14248857fc6a5"
application.process.session_id = "3"
The speaker icon on the taskbar says when I open it.:
No output or input devices found
Here is more info:
[demo@archlinux ~]$ pacmd list-cards
0 card(s) available.
[demo@archlinux ~]$ sudo pacmd list-cards
[sudo] password for demo:
No PulseAudio daemon running, or not running as session daemon.
[demo@archlinux ~]$ pacmd list-sinks
1 sink(s) available.
* index: 0
name: <auto_null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 344 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
module: 12
properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
[demo@archlinux ~]$ sudo pulseaudio -v
[sudo] password for demo:
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 17.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 57cff30757e244e493c14248857fc6a5.
I: [pulseaudio] main.c: Using runtime directory /root/.config/pulse/57cff30757e244e493c14248857fc6a5-runtime.
I: [pulseaudio] main.c: Using state directory /root/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulseaudio/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: System supports high resolution timers
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] database.c: Successfully opened 'device-volumes' database file '/root/.config/pulse/57cff30757e244e493c14248857fc6a5-device-volumes.tdb'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] database.c: Successfully opened 'stream-volumes' database file '/root/.config/pulse/57cff30757e244e493c14248857fc6a5-stream-volumes.tdb'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] database.c: Successfully opened 'card-database' database file '/root/.config/pulse/57cff30757e244e493c14248857fc6a5-card-database.tdb'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Device hw:sofhdadsp,3 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0001.hw:sofhdadsp: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #7; argument: "").
W: [pulseaudio] authkey.c: Failed to open cookie file '/root/.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '/root/.config/pulse/cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to open cookie file '/root/.pulse-cookie': No such file or directory
W: [pulseaudio] authkey.c: Failed to load authentication key '/root/.pulse-cookie': No such file or directory
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-gsettings" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
I: [null-sink] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [pulseaudio] core.c: default_source: (unset) -> auto_null.monitor
I: [pulseaudio] core.c: default_sink: (unset) -> auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument: "").
W: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
W: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] module-device-restore.c: Storing port for device sink:auto_null.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
I: [pulseaudio] module-device-restore.c: Storing port for device source:auto_null.monitor.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port source:auto_null.monitor:null.
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Device hw:sofhdadsp,3 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0002.hw:sofhdadsp: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0003.hw:sofhdadsp,3: Device or resource busy
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Device hw:sofhdadsp,3 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0004.hw:sofhdadsp: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0005.hw:sofhdadsp,3: Device or resource busy
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
I: [pulseaudio] alsa-ucm.c: UCM available for card hw:0
I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device HDMI1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic2, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'CaptureChannels' for device Mic1, assuming stereo.
I: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' for device Headphones, assuming stereo.
I: [pulseaudio] module-alsa-card.c: Found UCM profiles
I: [pulseaudio] alsa-ucm.c: Probing profile HiFi
I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi
I: [pulseaudio] alsa-util.c: Device hw:sofhdadsp,3 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Error opening PCM device _ucm0006.hw:sofhdadsp: No such file or directory
E: [pulseaudio] module-alsa-card.c: Failed to find a working profile.
E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="0" name="pci-0000_00_1f.3-platform-skl_hda_dsp_generic" card_name="alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed.
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) failed to load module.
W: [pulseaudio] module-udev-detect.c: Tried to configure /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0 (alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic) more often than 5 times in 10s
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
I: [pulseaudio] module-device-restore.c: Synced.
I: [pulseaudio] core.c: We are idle, quitting...
I: [pulseaudio] main.c: Daemon shutdown initiated.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #19).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #18).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #17).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #16).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #15).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #12).
I: [pulseaudio] core.c: default_sink: auto_null -> (unset)
I: [pulseaudio] core.c: default_source: auto_null.monitor -> (unset)
I: [pulseaudio] sink.c: Freeing sink 0 "auto_null"
I: [pulseaudio] source.c: Freeing source 0 "auto_null.monitor"
I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #12).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #11).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloading "module-gsettings" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-gsettings" (index: #9).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #7).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
Looking for what to try next.
Last edited by MAYBL8 (2024-12-03 16:19:01)
Offline
Please post the full journal. I'm seeing snd_soc_avs which always triggers an allergic reaction, try blacklisting that. Alternatively there are some reports with issues for the current alsa-ucm-conf package so if that coincided with an update maybe something along those lines: https://bbs.archlinux.org/viewtopic.php?id=301300
Offline
Here is the journal file:
http://0x0.st/X5hk.txt
I tried a couple of different downgrade files but it didn't change anything.
I haven't done downgrading before so I hope I did it correctly.
So I have reinstalled it back to current.
demo@archlinux ~]$ sudo pacman -S alsa-ucm-conf
:: alsa-ucm-conf is in IgnorePkg/IgnoreGroup. Install anyway? [Y/n] y
resolving dependencies...
looking for conflicting packages...
Packages (1) alsa-ucm-conf-1.2.12-1
Total Installed Size: 0.40 MiB
Net Upgrade Size: 0.08 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [----------------------------------------] 100%
(1/1) checking package integrity [----------------------------------------] 100%
(1/1) loading package files [----------------------------------------] 100%
(1/1) checking for file conflicts [----------------------------------------] 100%
(1/1) checking available disk space [----------------------------------------] 100%
:: Processing package changes...
(1/1) upgrading alsa-ucm-conf [----------------------------------------] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Refreshing PackageKit...
Something else I forgot to mention. Sound not working in Window either. It can't find sound card either. I'll go get the exact message if that matters.
It says No audio device is installed.
I hope I didn't screw up the motherboard.
Last edited by MAYBL8 (2024-11-26 15:01:58)
Offline
Then probably the integrated card simply getting disable due to the CMOS reset. Check your UEFI setting whether there's a setting to enable the audio card explicitly.
Offline
I looked at every setting in the Bios/UEFI and there is nothing on this laptop that has to do with sound.
I did discover something new.
Bluetooth does not work in Linux on this Laptop. However Bluetooth does work in Windows.
So I connected to my Alexa Echo plus and it played sound through the bluetooth speaker.
It just won't play sound through the laptop speakers
I'm not sure what else to try.
Offline
BT is an entirely different sound card so that's not further surprising. What output do you get from
sudo dmesg | grep -iE 'snd|sof'
aplay -l
pactl list cards
also make sure your system is up to date there was a potential regression in snd init due to a bug in alsa-ucm-conf and your log looks like it uses those. The fix should be in the just released 1.2.13-2
Last edited by V1del (2024-11-27 09:24:58)
Offline
This says I am up to date with -1 . Should I change mirrors or use downgrade to upgrade?
[demo@archlinux ~]$ sudo pacman -S alsa-ucm-conf
warning: alsa-ucm-conf-1.2.13-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) alsa-ucm-conf-1.2.13-1
Total Installed Size: 0.45 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] n
Here are the other commands you wanted me to run.
[demo@archlinux ~]$ sudo dmesg | grep -iE 'snd|sof'
[ 0.047034] software IO TLB: area num 8.
[ 0.399526] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.399526] software IO TLB: mapped [mem 0x000000003f708000-0x0000000043708000] (64MB)
[ 6.341905] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.531811] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[ 6.749846] sof-audio-pci-intel-cnl 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.749971] sof-audio-pci-intel-cnl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[ 6.750008] sof-audio-pci-intel-cnl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.757378] sof-audio-pci-intel-cnl 0000:00:1f.3: use msi interrupt mode
[ 6.785127] sof-audio-pci-intel-cnl 0000:00:1f.3: SoundWire links not enabled
[ 6.785131] sof-audio-pci-intel-cnl 0000:00:1f.3: hda codecs found, mask 4
[ 6.785133] sof-audio-pci-intel-cnl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[ 6.785136] sof-audio-pci-intel-cnl 0000:00:1f.3: BT link detected in NHLT tables: 0x0
[ 6.785138] sof-audio-pci-intel-cnl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[ 6.788909] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware paths/files for ipc type 0:
[ 6.788911] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware file: intel/sof/sof-cml.ri
[ 6.788912] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology file: intel/sof-tplg/sof-hda-generic-idisp-2ch.tplg
[ 6.790142] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 6.790143] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[ 6.790146] sof-audio-pci-intel-cnl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
[ 6.896656] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[ 6.896660] sof-audio-pci-intel-cnl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[ 6.916834] sof-audio-pci-intel-cnl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:1
[ 6.938236] input: sof-hda-dsp HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input28
[ 6.938320] input: sof-hda-dsp HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input29
[ 6.938409] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input30
[demo@archlinux ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofhdadsp [sof-hda-dsp], device 1: HDMI1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 2: HDMI2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI3 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
[demo@archlinux ~]$ pactl list cards
[demo@archlinux ~]$ sudo pactl list cards
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
I think I am going to open it up again and check the cables one more time.
I'll report back after I do that to see if it made a difference.
Offline
FWIW that's not up to date, you update with pacman -Syu, make sure you get alsa-ucm-conf 1.2.13-2
Offline
Got it but still no sound
Offline
Did this change anything about these outputs? If it didn't then you currently simply don't have a integrated card visible. That it also fails in Windows basically only leaves HW or UEFI misconfig.
Somewhat of a straw to grasp try a /etc/modprobe.d/disableSof.conf
options snd-intel-dspcfg dsp_driver=1
and rebooting.
Offline
It did change the following but still no sound.
I am going to look at the cables inside again Friday.
I'll post back here what I find out.
[demo@archlinux ~]$ sudo dmesg | grep -iE 'snd|sof'
[ 0.047442] software IO TLB: area num 8.
[ 0.390813] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.390814] software IO TLB: mapped [mem 0x000000003f1d6000-0x00000000431d6000] (64MB)
[ 6.471745] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.488882] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.489036] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
I tried reconnecting the ribbon cable for the speakers and the connector won't lock down onto the ribbon cable.
I am not going to buy a new motherboard for this. Too expensive.
I bought a usb bluetooth adapter and am going to use it with bluetooth speakers for sound.
Thanks for the help.
Last edited by MAYBL8 (2024-12-03 16:18:25)
Offline