You are not logged in.

Pages: 1

#1 2024-12-24 06:18:12

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

[SOLVED](G)UFW rules for QEMU VMs

I've been trying to get internet to work in QEMU, I use Ufw through Gufw and I need help in specifying the correct rules in opening the right ports and stuff to give internet access(I'm not good with firewalls),

I've tried 

ufw allow in on vibro0 from any to any

but that didn't work, another fix was setting the 

firewall backend=iptables in /etc/libvrt/network.conf(it didn't work)

But I'm also not sure if I want to do that either, seeing that iptables is old and superseded by `nft` and both qemu and ufw supporting `nftables` anyway.
Thank you for your inputs.

Last edited by Erwin Iosef (2024-12-30 08:15:16)

Offline

#2 2024-12-28 10:53:39

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 14,574

Re: [SOLVED](G)UFW rules for QEMU VMs

How/with what commands are you starting the VMs ?

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Online

#3 2024-12-29 09:33:41

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

Hey! I just use virt-manager. I never used commands for it, the issue only appeared when I started enabling my firewall through gufw and setting it to home profile.
EDIT: Here's my ufw rulelist:

$ sudo ufw verbose
[sudo] password for admin2: 
Status: active

To                         Action      From
--                         ------      ----
1714:1764/tcp              ALLOW       Anywhere                  
1714:1764/udp              ALLOW       Anywhere                  
22                         ALLOW       Anywhere                  
1714:1764/tcp (v6)         ALLOW       Anywhere (v6)             
1714:1764/udp (v6)         ALLOW       Anywhere (v6)             
22 (v6)                    ALLOW       Anywhere (v6)

Pretty sure it's a ufw rule problem. Setting incoming to allow has the VM be able to use internet. But that defeats the point of a home firewall when every incoming connection is set to allow.

Last edited by Erwin Iosef (2024-12-29 10:19:14)

Offline

#4 2024-12-29 11:23:19

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 14,574

Re: [SOLVED](G)UFW rules for QEMU VMs

virt-manager is a frontend for libvirt which uses nftables / iptables rules to manage network for guests, see https://wiki.archlinux.org/title/Libvirt#Networking .

The rules libvirt sets likely clash with the ones you set in ufw .

Please post the outputs of

$ ip a
$ ip r
$ ip -6 r

for the host and 1 guest .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Online

#5 2024-12-29 11:54:49

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

UFW supposedly can use iptables or nftables as a backend firewall, so you should be consistent and use iptables or nftables in both. I only use iptables, and libvirt in the default NAT network adds the necessary chains and rules to forward traffic, so you might not need to worry about it.

The problem may arise if UFW loads its rules after libvirt loads its own. A good reference to understand libvirt networking is NAT-based network

Restart the computer again and show us the output of the following commands so we can help you:

iptables -nvL --line-numbers
iptables -nvL --line-numbers -t nat

Offline

#6 2024-12-29 13:07:26

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

@macromal

$ sudo iptables -nvL --line-numbers
Chain INPUT (policy DROP 623 packets, 34172 bytes)
num   pkts bytes target     prot opt in     out     source               destination         
1    52862   60M ufw-before-logging-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
2    52862   60M ufw-before-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
3     1170 71955 ufw-after-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
4     1164 69473 ufw-after-logging-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
5     1164 69473 ufw-reject-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
6     1160 69205 ufw-track-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain FORWARD (policy DROP 0 packets, 0 bytes)
num   pkts bytes target     prot opt in     out     source               destination         
1     7765   12M ufw-before-logging-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
2     7765   12M ufw-before-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
3     6560 9281K ufw-after-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
4     6560 9281K ufw-after-logging-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
5     6560 9281K ufw-reject-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
6     6560 9281K ufw-track-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain OUTPUT (policy ACCEPT 8 packets, 320 bytes)
num   pkts bytes target     prot opt in     out     source               destination         
1    34644 6069K ufw-before-logging-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
2    34644 6069K ufw-before-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
3     3112  513K ufw-after-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
4     3112  513K ufw-after-logging-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
5     3112  513K ufw-reject-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
6     3112  513K ufw-track-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-after-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-after-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 ufw-skip-to-policy-input  17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:137
2        0     0 ufw-skip-to-policy-input  17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:138
3        0     0 ufw-skip-to-policy-input  6    --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:139
4        0     0 ufw-skip-to-policy-input  6    --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:445
5        3  1002 ufw-skip-to-policy-input  17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:67
6        0     0 ufw-skip-to-policy-input  17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:68
7        0     0 ufw-skip-to-policy-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0            ADDRTYPE match dst-type BROADCAST

Chain ufw-after-logging-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "

Chain ufw-after-logging-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1      172  5871 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "

Chain ufw-after-logging-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-after-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-before-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1       31  1888 ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
2        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 3
3        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 11
4        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 12
5        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 8
6        0     0 ufw-user-forward  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-before-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1      203 24100 ACCEPT     0    --  lo     *       0.0.0.0/0            0.0.0.0/0           
2    22465   21M ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
3       10   520 ufw-logging-deny  0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate INVALID
4       10   520 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate INVALID
5        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 3
6        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 11
7        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 12
8        0     0 ACCEPT     1    --  *      *       0.0.0.0/0            0.0.0.0/0            icmptype 8
9        0     0 ACCEPT     17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp spt:67 dpt:68
10     901  107K ufw-not-local  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
11     268 60767 ACCEPT     17   --  *      *       0.0.0.0/0            224.0.0.251          udp dpt:5353
12       0     0 ACCEPT     17   --  *      *       0.0.0.0/0            239.255.255.250      udp dpt:1900
13     633 46299 ufw-user-input  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-before-logging-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-before-logging-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-before-logging-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-before-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1      203 24100 ACCEPT     0    --  *      lo      0.0.0.0/0            0.0.0.0/0           
2    11434 2256K ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
3     1008  192K ufw-user-output  0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-logging-allow (0 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW ALLOW] "

Chain ufw-logging-deny (2 references)
num   pkts bytes target     prot opt in     out     source               destination         
1       10   520 RETURN     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate INVALID limit: avg 3/min burst 10
2        0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "

Chain ufw-not-local (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1      447 28568 RETURN     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ADDRTYPE match dst-type LOCAL
2      445 66431 RETURN     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ADDRTYPE match dst-type MULTICAST
3        9 12067 RETURN     0    --  *      *       0.0.0.0/0            0.0.0.0/0            ADDRTYPE match dst-type BROADCAST
4        0     0 ufw-logging-deny  0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 10
5        0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-reject-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-reject-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-reject-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-skip-to-policy-forward (0 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-skip-to-policy-input (7 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        3  1002 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-skip-to-policy-output (0 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-track-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-track-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-track-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1      255 15300 ACCEPT     6    --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate NEW
2      745  176K ACCEPT     17   --  *      *       0.0.0.0/0            0.0.0.0/0            ctstate NEW

Chain ufw-user-forward (1 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-user-input (1 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        1    60 ACCEPT     6    --  *      *       0.0.0.0/0            0.0.0.0/0            multiport dports 1714:1764
2        5  9281 ACCEPT     17   --  *      *       0.0.0.0/0            0.0.0.0/0            multiport dports 1714:1764
3        0     0 ACCEPT     6    --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:22
4        0     0 ACCEPT     17   --  *      *       0.0.0.0/0            0.0.0.0/0            udp dpt:22

Chain ufw-user-limit (0 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0            limit: avg 3/min burst 5 LOG flags 0 level 4 prefix "[UFW LIMIT BLOCK] "
2        0     0 REJECT     0    --  *      *       0.0.0.0/0            0.0.0.0/0            reject-with icmp-port-unreachable

Chain ufw-user-limit-accept (0 references)
num   pkts bytes target     prot opt in     out     source               destination         
1        0     0 ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain ufw-user-logging-forward (0 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-user-logging-input (0 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-user-logging-output (0 references)
num   pkts bytes target     prot opt in     out     source               destination         

Chain ufw-user-output (1 references)
num   pkts bytes target     prot opt in     out     source               destination
$ sudo iptables -nvL --line-numbers -t nat
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
num   pkts bytes target     prot opt in     out     source               destination         

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
num   pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
num   pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
num   pkts bytes target     prot opt in     out     source               destination

@Lone_Wolf

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f4:8e:38:a5:a9:34 brd ff:ff:ff:ff:ff:ff
    altname enxf48e38a5a934
    inet 192.168.1.76/24 brd 192.168.1.255 scope global dynamic noprefixroute enp2s0
       valid_lft 86002sec preferred_lft 86002sec
    inet6 fe80::fe8e:ede7:a7d:7df8/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb state DOWN group default qlen 1000
    link/ether 52:54:00:6f:bf:05 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
$ ip r
default via 192.168.1.1 dev enp2s0 proto dhcp src 192.168.1.76 metric 100 
192.168.1.0/24 dev enp2s0 proto kernel scope link src 192.168.1.76 metric 100 
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown 
$ ip -6 r
fe80::/64 dev enp2s0 proto kernel metric 1024 pref medium

EDIT: @Lone_Wolf do I need to input the commands again inside the VM and post?

Last edited by Erwin Iosef (2024-12-29 13:11:28)

Offline

#7 2024-12-29 13:08:38

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

Quick question, do pinging users work on this site? If so, is there a prefix you need to add before the username?

Offline

#8 2024-12-29 13:22:12

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 14,574

Re: [SOLVED](G)UFW rules for QEMU VMs

Pinging users doesn't work, but the meaning of @username is understood.
If you want an email notification of new posts, use 'subscribe to this topic'  (bottom right).

EDIT: @Lone_Wolf do I need to input the commands again inside the VM and post?

Not anymore , the output matches what I expected. It does appear this is not a routing/dns issue .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Online

#9 2024-12-29 13:25:38

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

Pinging users doesn't work, but the meaning of @username is understood.
If you want an email notification of new posts, use 'subscribe to this topic'  (bottom right).

Oh okay, thanks.

Not anymore , the output matches what I expected. It does appear this is not a routing/dns issue .

I see, now what? Wait for macromal's reply?

Offline

#10 2024-12-29 13:50:24

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

The problem is that UFW has overwritten all the rules of libvirt.

The default NAT network rules of libvirt are as follows:

TABLE FILTER
Chain INPUT (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
 3841  335K LIBVIRT_INP  0    --  *      *       0.0.0.0/0            0.0.0.0/0
...

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
62626  136M LIBVIRT_FWX  0    --  *      *       0.0.0.0/0            0.0.0.0/0
62626  136M LIBVIRT_FWI  0    --  *      *       0.0.0.0/0            0.0.0.0/0
26873 7624K LIBVIRT_FWO  0    --  *      *       0.0.0.0/0            0.0.0.0/0

Chain OUTPUT (policy DROP 37 packets, 18873 bytes)
 pkts bytes target     prot opt in     out     source               destination
 2054  327K LIBVIRT_OUT  0    --  *      *       0.0.0.0/0            0.0.0.0/0
...

Chain LIBVIRT_FWO (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 REJECT     0    --  virbr8 *       0.0.0.0/0            0.0.0.0/0            reject-with icmp-port-unreachable
26873 7624K ACCEPT     0    --  virbr0 *       192.168.122.0/24     0.0.0.0/0
    0     0 REJECT     0    --  virbr0 *       0.0.0.0/0            0.0.0.0/0            reject-with icmp-port-unreachable

Chain LIBVIRT_FWX (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     0    --  virbr8 virbr8  0.0.0.0/0            0.0.0.0/0
    0     0 ACCEPT     0    --  virbr0 virbr0  0.0.0.0/0            0.0.0.0/0

Chain LIBVIRT_INP (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     17   --  virbr8 *       0.0.0.0/0            0.0.0.0/0            udp dpt:53
    0     0 ACCEPT     6    --  virbr8 *       0.0.0.0/0            0.0.0.0/0            tcp dpt:53
    0     0 ACCEPT     17   --  virbr8 *       0.0.0.0/0            0.0.0.0/0            udp dpt:67
    0     0 ACCEPT     6    --  virbr8 *       0.0.0.0/0            0.0.0.0/0            tcp dpt:67
    0     0 ACCEPT     17   --  virbr0 *       0.0.0.0/0            0.0.0.0/0            udp dpt:53
    0     0 ACCEPT     6    --  virbr0 *       0.0.0.0/0            0.0.0.0/0            tcp dpt:53
   11  3292 ACCEPT     17   --  virbr0 *       0.0.0.0/0            0.0.0.0/0            udp dpt:67
    0     0 ACCEPT     6    --  virbr0 *       0.0.0.0/0            0.0.0.0/0            tcp dpt:67

Chain LIBVIRT_OUT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     17   --  *      virbr8  0.0.0.0/0            0.0.0.0/0            udp dpt:53
    0     0 ACCEPT     6    --  *      virbr8  0.0.0.0/0            0.0.0.0/0            tcp dpt:53
    0     0 ACCEPT     17   --  *      virbr8  0.0.0.0/0            0.0.0.0/0            udp dpt:68
    0     0 ACCEPT     6    --  *      virbr8  0.0.0.0/0            0.0.0.0/0            tcp dpt:68
    0     0 ACCEPT     17   --  *      virbr0  0.0.0.0/0            0.0.0.0/0            udp dpt:53
    0     0 ACCEPT     6    --  *      virbr0  0.0.0.0/0            0.0.0.0/0            tcp dpt:53
   11  3608 ACCEPT     17   --  *      virbr0  0.0.0.0/0            0.0.0.0/0            udp dpt:68
    0     0 ACCEPT     6    --  *      virbr0  0.0.0.0/0            0.0.0.0/0            tcp dpt:68


TABLE NAT
Chain PREROUTING (policy ACCEPT 1868 packets, 118K bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain INPUT (policy ACCEPT 8 packets, 2368 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 63 packets, 4909 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain POSTROUTING (policy ACCEPT 58 packets, 4468 bytes)
 pkts bytes target     prot opt in     out     source               destination
  165 29863 LIBVIRT_PRT  0    --  *      *       0.0.0.0/0            0.0.0.0/0

Chain LIBVIRT_PRT (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 RETURN     0    --  *      *       192.168.122.0/24     224.0.0.0/24
    0     0 RETURN     0    --  *      *       192.168.122.0/24     255.255.255.255
   95 10035 MASQUERADE  6    --  *      *       192.168.122.0/24    !192.168.122.0/24     masq ports: 1024-65535
   12 15360 MASQUERADE  17   --  *      *       192.168.122.0/24    !192.168.122.0/24     masq ports: 1024-65535
    0     0 MASQUERADE  0    --  *      *       192.168.122.0/24    !192.168.122.0/24

There are several possible solutions:

  • Configure the Custom NAT-based network. This way, I understand that you can set it up to your liking.

  • Use another firewall that works with libvirt, like arno-iptables-firewall: AUR package.

  • If you don't start the default network at boot, but rather after the UFW rules, libvirt will likely overwrite the UFW rules and the network will work.

  • Another solution with UFW that I am not aware of.

Last edited by macromal (2024-12-29 14:05:58)

Offline

#11 2024-12-29 13:56:12

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

@macromal Thanks for your reply.
I think I'll go with the safest solution, I just want my network to work with a stable firewall, I'm not really good at configuring networks.
How can I do the third solution you mentioned?

Offline

#12 2024-12-29 14:11:36

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

This is an assumption, it may not work.

You can do it from Virt-manager or with libvirt.

Disable the automatic startup of the default network:

virsh -c qemu:///system net-autostart --network default --disable

Start the default network:

virsh -c qemu:///system net-start --network default

Offline

#13 2024-12-29 14:23:51

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

I ran the commands on my host CLI and it didn't work. For reference, my ufw profile is set to home with incoming=Deny and Outgoing=Allow.

Also I ran systemctl --list-dependencies and I found that ufw did start later after libvirtd in the tree.

Offline

#14 2024-12-29 14:27:39

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

You must restart before the computer.

Offline

#15 2024-12-29 15:28:24

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

I restarted my computer after applying the commands and it didn't work
Why disable the autostart? Would'nt it have me manually start the network each time I reboot?

Last edited by Erwin Iosef (2024-12-29 15:29:39)

Offline

#16 2024-12-29 15:32:58

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

macromal wrote:

You must restart before the computer.

Typo?

Offline

#17 2024-12-29 15:36:36

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

It is only necessary to start the network.

I told you it was an assumption and it might not work.

Last edited by macromal (2024-12-29 15:52:52)

Offline

#18 2024-12-29 16:01:30

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

Yeah.. Damn.
Another user had the same problem and fixed via allowing DHCP ports(I tried what I could and that too didn't work)

Last edited by Erwin Iosef (2024-12-29 16:03:01)

Offline

#19 2024-12-29 17:04:55

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

@Lone_Wolf any suggestions?

Offline

#20 2024-12-29 17:26:52

macromal
Member
Registered: 2024-08-03
Posts: 40
Website

Re: [SOLVED](G)UFW rules for QEMU VMs

Google is your friend.

Offline

#21 2024-12-29 17:30:33

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

I tried that's why I'm here lol.
Thanks for your help btw, I appreciate it.
EDIT: gufw report section shows dnsmasq showing ports 53, 67 and 68, I allowed them all and still it doesn't work

Last edited by Erwin Iosef (2024-12-29 17:39:53)

Offline

#22 2024-12-30 08:14:39

Erwin Iosef
Member
Registered: 2024-05-22
Posts: 92

Re: [SOLVED](G)UFW rules for QEMU VMs

So, I replaced ufw with firewalld and it was way more convenient with the home zone and removed my problem. Although it may feel like a defeat, for future readers with the same problem, maybe try opening the dhcp ports(67/68), and 547,546 that's all I gathered for now, feel free to post a solution btw, thanks smile Marking as solved for now.

Offline

Pages: 1

Board footer

Powered by FluxBB