You are not logged in.
Hi
I am using Arch + KDE with Intel Arc IGPU on Core Ultra processors . Everything was fine until I noticed that after playing a video in VLC or MPV, the video and screen flickered slightly. This is even seen in SDDM. First I changed the Wayland session to X11, and this problem is also seen there even on X11. Although it is not available in Wayland, I set the compositor settings to OpenGL backend in config/kwinrc./~ but the problem was not solved. I read in a few threads that some people had flickering problems with the new Mesa version on KDE, so I also downgraded Mesa to version 24.3.1, 24.2.7, 24.2.6 but the problem was not solved.
I tested other desktops including Gnome and Mate with the latest Mesa version and this behavior is not observed.
Drivers are all up to date
glu 9.0.3-2
mesa 1:24.3.2-1
intel-media-driver 24.4.4-1
vulkan-intel 1:24.3.2-1
KDE 6.2.4
KDE Frameworks 6.9.0
Kernel: linux-6.12.7-arch1-1
Does anyone have any ideas for this?
Offline
Recent mesa and flicker issues where limited to amdgpu, have you tried https://wiki.archlinux.org/title/Intel_ … flickering or to https://wiki.archlinux.org/title/Intel_ … _Xe_driver
Offline
Recent mesa and flicker issues where limited to amdgpu, have you tried https://wiki.archlinux.org/title/Intel_ … flickering or to https://wiki.archlinux.org/title/Intel_ … _Xe_driver
i tested https://wiki.archlinux.org/title/Intel_ … flickering before. and it didn't fix my problem
I did it now https://wiki.archlinux.org/title/Intel_ … _Xe_driver.
dmesg shows that the xe module is loaded correctly and the i915 module is blocked for the pice in question. But the problem still exists.
Last edited by cuteorange (2024-12-31 17:40:22)
Offline
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr --verbose"
Can you elaborate on the "slight flicker"? Does it jerk between two frames, shutter (black, frame, black, frame, black, …) or do you get eg. stray artifact lines or blocks?
Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
Offline
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr --verbose"
Can you elaborate on the "slight flicker"? Does it jerk between two frames, shutter (black, frame, black, frame, black, …) or do you get eg. stray artifact lines or blocks?
Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
Can you elaborate on the "slight flicker"? Does it jerk between two frames, shutter (black, frame, black, frame, black, …) or do you get eg. stray artifact lines or blocks?
Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
Regarding the description of these flickering, I should say that it acts like a shutter and you will see fast black shots on the screen. Usually when I play a video with vlc or mpv in full screen, the edges of the screen that are on the left and right flicker black and after watching for a while, they may become more intense or even in the middle of the screen, shutters with black color but fast can be seen. When you close the player, you will also see these black shutters in the kde and sddm environment itself. Especially in the bright or almost bright background. This may sometimes be resolved by rebooting the system, but it will not necessarily disappear on the first reboot and you will still see it. Sometimes the flickers are fast and very clear and sometimes mild.
For another test, I downloaded Big Buck Bunny 1080p 60fps short animation. To test this situation there as well. I didn't see these jumps and flicks in it. But they show up in the other two videos. The frame rate of both is 24fps. And they use the x265 1080p codec. At first I thought the problem was with the videos, but it's strange to see the flickering transfer to the desktop and SDDM environment.
Xorg.0.log :
[ 613.721] (--) Log file renamed from "/var/log/Xorg.pid-3874.log" to "/var/log/Xorg.0.log"
[ 613.721]
X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
[ 613.721] Current Operating System: Linux archlinux 6.12.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 27 Dec 2024 14:24:37 +0000 x86_64
[ 613.721] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=b87bcdfc-9768-4f02-b37c-c9a168550ebe rootflags=subvol=@ rw rootfstype=btrfs i915.force_probe=!7d55 xe.force_probe=7d55
[ 613.721]
[ 613.721] Current version of pixman: 0.44.2
[ 613.721] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 613.721] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 613.721] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 1 09:30:32 2025
[ 613.721] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 613.721] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 613.721] (==) No Layout section. Using the first Screen section.
[ 613.721] (==) No screen section available. Using defaults.
[ 613.721] (**) |-->Screen "Default Screen Section" (0)
[ 613.721] (**) | |-->Monitor "<default monitor>"
[ 613.721] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 613.721] (**) Allowing byte-swapped clients
[ 613.721] (==) Automatically adding devices
[ 613.721] (==) Automatically enabling devices
[ 613.721] (==) Automatically adding GPU devices
[ 613.721] (==) Automatically binding GPU devices
[ 613.721] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 613.721] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 613.721] Entry deleted from font path.
[ 613.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 613.721] Entry deleted from font path.
[ 613.721] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 613.721] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 613.721] Entry deleted from font path.
[ 613.721] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 613.721] Entry deleted from font path.
[ 613.721] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 613.721] Entry deleted from font path.
[ 613.721] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 613.721] Entry deleted from font path.
[ 613.721] (==) FontPath set to:
[ 613.721] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 613.721] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 613.721] (II) Module ABI versions:
[ 613.721] X.Org ANSI C Emulation: 0.4
[ 613.721] X.Org Video Driver: 25.2
[ 613.721] X.Org XInput driver : 24.4
[ 613.721] X.Org Server Extension : 10.0
[ 613.722] (++) using VT number 2
[ 613.722] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 613.722] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 613.722] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 613.735] (--) PCI:*(0@0:2:0) 8086:7d55:17aa:3f96 rev 8, Mem @ 0x4818000000/16777216, 0x4000000000/268435456, BIOS @ 0x????????/131072
[ 613.735] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 613.735] (II) LoadModule: "glx"
[ 613.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 613.735] (II) Module glx: vendor="X.Org Foundation"
[ 613.735] compiled for 1.21.1.15, module version = 1.0.0
[ 613.735] ABI class: X.Org Server Extension, version 10.0
[ 613.735] (==) Matched intel as autoconfigured driver 0
[ 613.735] (==) Matched modesetting as autoconfigured driver 1
[ 613.735] (==) Matched fbdev as autoconfigured driver 2
[ 613.735] (==) Matched vesa as autoconfigured driver 3
[ 613.735] (==) Assigned the driver to the xf86ConfigLayout
[ 613.735] (II) LoadModule: "intel"
[ 613.735] (WW) Warning, couldn't open module intel
[ 613.735] (EE) Failed to load module "intel" (module does not exist, 0)
[ 613.735] (II) LoadModule: "modesetting"
[ 613.735] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 613.735] (II) Module modesetting: vendor="X.Org Foundation"
[ 613.735] compiled for 1.21.1.15, module version = 1.21.1
[ 613.735] Module class: X.Org Video Driver
[ 613.735] ABI class: X.Org Video Driver, version 25.2
[ 613.735] (II) LoadModule: "fbdev"
[ 613.736] (WW) Warning, couldn't open module fbdev
[ 613.736] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 613.736] (II) LoadModule: "vesa"
[ 613.736] (WW) Warning, couldn't open module vesa
[ 613.736] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 613.736] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 613.767] (II) modeset(0): using drv /dev/dri/card0
[ 613.767] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 613.767] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 613.767] (==) modeset(0): RGB weight 888
[ 613.767] (==) modeset(0): Default visual is TrueColor
[ 613.767] (II) Loading sub module "glamoregl"
[ 613.767] (II) LoadModule: "glamoregl"
[ 613.767] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 613.768] (II) Module glamoregl: vendor="X.Org Foundation"
[ 613.768] compiled for 1.21.1.15, module version = 1.0.1
[ 613.768] ABI class: X.Org ANSI C Emulation, version 0.4
[ 613.791] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Arc(tm) Graphics (MTL)
[ 613.791] (II) modeset(0): glamor initialized
[ 613.791] (==) modeset(0): VariableRefresh: disabled
[ 613.791] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 613.794] (II) modeset(0): Output eDP-1 has no monitor section
[ 613.803] (II) modeset(0): Output HDMI-1 has no monitor section
[ 613.803] (II) modeset(0): Output DP-1 has no monitor section
[ 613.803] (II) modeset(0): Output DP-2 has no monitor section
[ 613.803] (II) modeset(0): Output DP-3 has no monitor section
[ 613.803] (II) modeset(0): Output DP-4 has no monitor section
[ 613.805] (II) modeset(0): EDID for output eDP-1
[ 613.805] (II) modeset(0): Manufacturer: BOE Model: b76 Serial#: 0
[ 613.805] (II) modeset(0): Year: 2022 Week: 27
[ 613.805] (II) modeset(0): EDID Version: 1.4
[ 613.805] (II) modeset(0): Digital Display Input
[ 613.805] (II) modeset(0): 8 bits per channel
[ 613.805] (II) modeset(0): Digital interface is DisplayPort
[ 613.805] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 22
[ 613.805] (II) modeset(0): Gamma: 2.20
[ 613.805] (II) modeset(0): No DPMS capabilities specified
[ 613.805] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 613.805] (II) modeset(0): First detailed timing is preferred mode
[ 613.805] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 613.805] (II) modeset(0): Display is continuous-frequency
[ 613.805] (II) modeset(0): redX: 0.587 redY: 0.366 greenX: 0.356 greenY: 0.584
[ 613.805] (II) modeset(0): blueX: 0.168 blueY: 0.132 whiteX: 0.313 whiteY: 0.329
[ 613.805] (II) modeset(0): Manufacturer's mask: 0
[ 613.805] (II) modeset(0): Supported detailed timing:
[ 613.805] (II) modeset(0): clock: 168.2 MHz Image Size: 345 x 215 mm
[ 613.805] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2260 h_border: 0
[ 613.805] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1240 v_border: 0
[ 613.805] (II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 74 H max: 74 kHz, PixClock max 175 MHz
[ 613.805] (II) modeset(0): NV160WUM-N48
[ 613.805] (II) modeset(0): EDID (in hex):
[ 613.805] (II) modeset(0): 00ffffffffffff0009e5760b00000000
[ 613.805] (II) modeset(0): 1b200104a5221678037635965d5b952b
[ 613.805] (II) modeset(0): 21505400000001010101010101010101
[ 613.805] (II) modeset(0): 010101010101af41805471b028403020
[ 613.805] (II) modeset(0): 360059d71000001a0000000000000000
[ 613.805] (II) modeset(0): 00000000000000000000000000fd0028
[ 613.805] (II) modeset(0): 3c4a4a11010a202020202020000000fe
[ 613.805] (II) modeset(0): 004e5631363057554d2d4e34380a0050
[ 613.805] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[ 613.805] (II) modeset(0): Printing probed modes for output eDP-1
[ 613.805] (II) modeset(0): Modeline "1920x1200"x60.0 168.15 1920 1968 2000 2260 1200 1203 1209 1240 +hsync -vsync (74.4 kHz eP)
[ 613.805] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 613.805] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 613.805] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 613.805] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 613.805] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 613.805] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 613.805] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 613.805] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 613.805] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 613.805] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 613.805] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 613.805] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 613.805] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 613.805] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 613.813] (II) modeset(0): EDID for output HDMI-1
[ 613.813] (II) modeset(0): EDID for output DP-1
[ 613.813] (II) modeset(0): EDID for output DP-2
[ 613.813] (II) modeset(0): EDID for output DP-3
[ 613.813] (II) modeset(0): EDID for output DP-4
[ 613.813] (II) modeset(0): Output eDP-1 connected
[ 613.813] (II) modeset(0): Output HDMI-1 disconnected
[ 613.813] (II) modeset(0): Output DP-1 disconnected
[ 613.813] (II) modeset(0): Output DP-2 disconnected
[ 613.813] (II) modeset(0): Output DP-3 disconnected
[ 613.813] (II) modeset(0): Output DP-4 disconnected
[ 613.813] (II) modeset(0): Using exact sizes for initial modes
[ 613.813] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0
[ 613.813] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 613.813] (==) modeset(0): DPI set to (96, 96)
[ 613.813] (II) Loading sub module "fb"
[ 613.813] (II) LoadModule: "fb"
[ 613.813] (II) Module "fb" already built-in
[ 613.818] (==) modeset(0): Backing store enabled
[ 613.818] (==) modeset(0): Silken mouse enabled
[ 613.900] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 613.900] (==) modeset(0): DPMS enabled
[ 613.901] (II) modeset(0): [DRI2] Setup complete
[ 613.901] (II) modeset(0): [DRI2] DRI driver: iris
[ 613.901] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 613.901] (II) Initializing extension Generic Event Extension
[ 613.901] (II) Initializing extension SHAPE
[ 613.901] (II) Initializing extension MIT-SHM
[ 613.901] (II) Initializing extension XInputExtension
[ 613.901] (II) Initializing extension XTEST
[ 613.901] (II) Initializing extension BIG-REQUESTS
[ 613.902] (II) Initializing extension SYNC
[ 613.902] (II) Initializing extension XKEYBOARD
[ 613.902] (II) Initializing extension XC-MISC
[ 613.902] (II) Initializing extension SECURITY
[ 613.902] (II) Initializing extension XFIXES
[ 613.902] (II) Initializing extension RENDER
[ 613.902] (II) Initializing extension RANDR
[ 613.903] (II) Initializing extension COMPOSITE
[ 613.903] (II) Initializing extension DAMAGE
[ 613.903] (II) Initializing extension MIT-SCREEN-SAVER
[ 613.903] (II) Initializing extension DOUBLE-BUFFER
[ 613.903] (II) Initializing extension RECORD
[ 613.903] (II) Initializing extension DPMS
[ 613.903] (II) Initializing extension Present
[ 613.903] (II) Initializing extension DRI3
[ 613.903] (II) Initializing extension X-Resource
[ 613.903] (II) Initializing extension XVideo
[ 613.903] (II) Initializing extension XVideo-MotionCompensation
[ 613.903] (II) Initializing extension GLX
[ 613.912] (II) AIGLX: Loaded and initialized iris
[ 613.912] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 613.912] (II) Initializing extension XFree86-VidModeExtension
[ 613.912] (II) Initializing extension XFree86-DGA
[ 613.912] (II) Initializing extension XFree86-DRI
[ 613.912] (II) Initializing extension DRI2
[ 613.913] (II) modeset(0): Damage tracking initialized
[ 613.913] (II) modeset(0): Setting screen physical size to 508 x 317
[ 613.935] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 613.935] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 613.935] (**) Video Bus: Applying InputClass "system-keyboard"
[ 613.935] (II) LoadModule: "libinput"
[ 613.935] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 613.936] (II) Module libinput: vendor="X.Org Foundation"
[ 613.936] compiled for 1.21.1.13, module version = 1.5.0
[ 613.936] Module class: X.Org XInput Driver
[ 613.936] ABI class: X.Org XInput driver, version 24.4
[ 613.936] (II) Using input driver 'libinput' for 'Video Bus'
[ 613.936] (**) Video Bus: always reports core events
[ 613.936] (**) Option "Device" "/dev/input/event4"
[ 613.936] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 613.936] (II) event4 - Video Bus: device is a keyboard
[ 613.936] (II) event4 - Video Bus: device removed
[ 614.010] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 614.010] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 614.010] (**) Option "xkb_model" "pc105+inet"
[ 614.010] (**) Option "xkb_layout" "us"
[ 614.010] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.027] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 614.027] (II) event4 - Video Bus: device is a keyboard
[ 614.028] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 614.028] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 614.028] (**) Power Button: Applying InputClass "system-keyboard"
[ 614.028] (II) Using input driver 'libinput' for 'Power Button'
[ 614.028] (**) Power Button: always reports core events
[ 614.028] (**) Option "Device" "/dev/input/event0"
[ 614.028] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 614.028] (II) event0 - Power Button: device is a keyboard
[ 614.028] (II) event0 - Power Button: device removed
[ 614.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 614.060] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 614.060] (**) Option "xkb_model" "pc105+inet"
[ 614.060] (**) Option "xkb_layout" "us"
[ 614.060] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.061] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 614.061] (II) event0 - Power Button: device is a keyboard
[ 614.061] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 614.061] (II) No input driver specified, ignoring this device.
[ 614.061] (II) This device may have been added with another device file.
[ 614.062] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 614.062] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 614.062] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 614.062] (II) Using input driver 'libinput' for 'Sleep Button'
[ 614.062] (**) Sleep Button: always reports core events
[ 614.062] (**) Option "Device" "/dev/input/event2"
[ 614.062] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 614.062] (II) event2 - Sleep Button: device is a keyboard
[ 614.063] (II) event2 - Sleep Button: device removed
[ 614.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 614.100] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 614.100] (**) Option "xkb_model" "pc105+inet"
[ 614.100] (**) Option "xkb_layout" "us"
[ 614.100] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.101] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 614.101] (II) event2 - Sleep Button: device is a keyboard
[ 614.102] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event16)
[ 614.102] (**) USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 614.102] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[ 614.102] (**) USB OPTICAL MOUSE: always reports core events
[ 614.102] (**) Option "Device" "/dev/input/event16"
[ 614.155] (II) event16 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 614.155] (II) event16 - USB OPTICAL MOUSE: device is a pointer
[ 614.155] (II) event16 - USB OPTICAL MOUSE: device removed
[ 614.206] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.206] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.206] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0000:0538.0002/input/input20/event16"
[ 614.206] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 614.206] (**) Option "AccelerationScheme" "none"
[ 614.206] (**) USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 614.206] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 614.206] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 614.261] (II) event16 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 614.262] (II) event16 - USB OPTICAL MOUSE: device is a pointer
[ 614.262] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse2)
[ 614.263] (II) No input driver specified, ignoring this device.
[ 614.263] (II) This device may have been added with another device file.
[ 614.263] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Mouse (/dev/input/event9)
[ 614.263] (**) FTCS0038:00 2808:0106 Mouse: Applying InputClass "libinput pointer catchall"
[ 614.263] (II) Using input driver 'libinput' for 'FTCS0038:00 2808:0106 Mouse'
[ 614.263] (**) FTCS0038:00 2808:0106 Mouse: always reports core events
[ 614.263] (**) Option "Device" "/dev/input/event9"
[ 614.264] (II) event9 - FTCS0038:00 2808:0106 Mouse: is tagged by udev as: Mouse Pointingstick
[ 614.264] (II) event9 - FTCS0038:00 2808:0106 Mouse: device is a pointer
[ 614.264] (II) event9 - FTCS0038:00 2808:0106 Mouse: device removed
[ 614.337] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.337] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.337] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.337] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-15/i2c-FTCS0038:00/0018:2808:0106.0001/input/input12/event9"
[ 614.337] (II) XINPUT: Adding extended input device "FTCS0038:00 2808:0106 Mouse" (type: MOUSE, id 10)
[ 614.337] (**) Option "AccelerationScheme" "none"
[ 614.337] (**) FTCS0038:00 2808:0106 Mouse: (accel) selected scheme none/0
[ 614.337] (**) FTCS0038:00 2808:0106 Mouse: (accel) acceleration factor: 2.000
[ 614.337] (**) FTCS0038:00 2808:0106 Mouse: (accel) acceleration threshold: 4
[ 614.338] (II) event9 - FTCS0038:00 2808:0106 Mouse: is tagged by udev as: Mouse Pointingstick
[ 614.339] (II) event9 - FTCS0038:00 2808:0106 Mouse: device is a pointer
[ 614.340] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Mouse (/dev/input/mouse0)
[ 614.340] (II) No input driver specified, ignoring this device.
[ 614.340] (II) This device may have been added with another device file.
[ 614.340] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Touchpad (/dev/input/event10)
[ 614.340] (**) FTCS0038:00 2808:0106 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 614.340] (II) Using input driver 'libinput' for 'FTCS0038:00 2808:0106 Touchpad'
[ 614.340] (**) FTCS0038:00 2808:0106 Touchpad: always reports core events
[ 614.340] (**) Option "Device" "/dev/input/event10"
[ 614.341] (II) event10 - FTCS0038:00 2808:0106 Touchpad: is tagged by udev as: Touchpad
[ 614.342] (II) event10 - FTCS0038:00 2808:0106 Touchpad: device is a touchpad
[ 614.342] (II) event10 - FTCS0038:00 2808:0106 Touchpad: device removed
[ 614.410] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.410] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.410] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 614.411] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-15/i2c-FTCS0038:00/0018:2808:0106.0001/input/input13/event10"
[ 614.411] (II) XINPUT: Adding extended input device "FTCS0038:00 2808:0106 Touchpad" (type: TOUCHPAD, id 11)
[ 614.412] (**) Option "AccelerationScheme" "none"
[ 614.412] (**) FTCS0038:00 2808:0106 Touchpad: (accel) selected scheme none/0
[ 614.412] (**) FTCS0038:00 2808:0106 Touchpad: (accel) acceleration factor: 2.000
[ 614.412] (**) FTCS0038:00 2808:0106 Touchpad: (accel) acceleration threshold: 4
[ 614.413] (II) event10 - FTCS0038:00 2808:0106 Touchpad: is tagged by udev as: Touchpad
[ 614.414] (II) event10 - FTCS0038:00 2808:0106 Touchpad: device is a touchpad
[ 614.415] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Touchpad (/dev/input/mouse1)
[ 614.415] (II) No input driver specified, ignoring this device.
[ 614.415] (II) This device may have been added with another device file.
[ 614.415] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 614.415] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 614.415] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 614.415] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 614.415] (**) Ideapad extra buttons: always reports core events
[ 614.415] (**) Option "Device" "/dev/input/event8"
[ 614.415] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 614.415] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 614.415] (II) event8 - Ideapad extra buttons: device removed
[ 614.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event8"
[ 614.483] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 614.483] (**) Option "xkb_model" "pc105+inet"
[ 614.483] (**) Option "xkb_layout" "us"
[ 614.483] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.485] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 614.485] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 614.485] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event11)
[ 614.485] (II) No input driver specified, ignoring this device.
[ 614.485] (II) This device may have been added with another device file.
[ 614.486] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event12)
[ 614.486] (II) No input driver specified, ignoring this device.
[ 614.486] (II) This device may have been added with another device file.
[ 614.486] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event13)
[ 614.486] (II) No input driver specified, ignoring this device.
[ 614.486] (II) This device may have been added with another device file.
[ 614.486] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event14)
[ 614.486] (II) No input driver specified, ignoring this device.
[ 614.486] (II) This device may have been added with another device file.
[ 614.486] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event15)
[ 614.486] (II) No input driver specified, ignoring this device.
[ 614.486] (II) This device may have been added with another device file.
[ 614.487] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[ 614.487] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 614.487] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 614.487] (II) Using input driver 'libinput' for 'Intel HID events'
[ 614.487] (**) Intel HID events: always reports core events
[ 614.487] (**) Option "Device" "/dev/input/event5"
[ 614.487] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 614.487] (II) event5 - Intel HID events: device is a keyboard
[ 614.487] (II) event5 - Intel HID events: device removed
[ 614.530] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input5/event5"
[ 614.530] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 614.530] (**) Option "xkb_model" "pc105+inet"
[ 614.530] (**) Option "xkb_layout" "us"
[ 614.530] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.531] (II) event5 - Intel HID events: is tagged by udev as: Keyboard
[ 614.531] (II) event5 - Intel HID events: device is a keyboard
[ 614.532] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event6)
[ 614.532] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 614.532] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 614.532] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 614.532] (**) Intel HID 5 button array: always reports core events
[ 614.532] (**) Option "Device" "/dev/input/event6"
[ 614.533] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 614.533] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 614.533] (II) event6 - Intel HID 5 button array: device removed
[ 614.576] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input6/event6"
[ 614.576] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 14)
[ 614.576] (**) Option "xkb_model" "pc105+inet"
[ 614.576] (**) Option "xkb_layout" "us"
[ 614.576] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.577] (II) event6 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 614.577] (II) event6 - Intel HID 5 button array: device is a keyboard
[ 614.578] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 614.578] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 614.578] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 614.578] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 614.578] (**) AT Translated Set 2 keyboard: always reports core events
[ 614.578] (**) Option "Device" "/dev/input/event3"
[ 614.579] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 614.579] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 614.580] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 614.613] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 614.613] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 614.613] (**) Option "xkb_model" "pc105+inet"
[ 614.613] (**) Option "xkb_layout" "us"
[ 614.613] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 614.614] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 614.615] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 614.616] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 614.616] (II) No input driver specified, ignoring this device.
[ 614.616] (II) This device may have been added with another device file.
[ 621.342] (II) event4 - Video Bus: device removed
[ 621.400] (II) event0 - Power Button: device removed
[ 621.440] (II) event2 - Sleep Button: device removed
[ 621.480] (II) event16 - USB OPTICAL MOUSE: device removed
[ 621.533] (II) event9 - FTCS0038:00 2808:0106 Mouse: device removed
[ 621.587] (II) event10 - FTCS0038:00 2808:0106 Touchpad: device removed
[ 621.640] (II) event8 - Ideapad extra buttons: device removed
[ 621.673] (II) event5 - Intel HID events: device removed
[ 621.690] (II) event6 - Intel HID 5 button array: device removed
[ 621.707] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 621.733] (II) AIGLX: Suspending AIGLX clients for VT switchXorg.2.log :
[ 517.388] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 517.388] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 517.388] (--) Log file renamed from "/var/log/Xorg.pid-4475.log" to "/var/log/Xorg.2.log"
[ 517.388]
X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
[ 517.388] Current Operating System: Linux archlinux 6.12.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 27 Dec 2024 14:24:37 +0000 x86_64
[ 517.388] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=b87bcdfc-9768-4f02-b37c-c9a168550ebe rootflags=subvol=@ rw rootfstype=btrfs
[ 517.388]
[ 517.388] Current version of pixman: 0.44.2
[ 517.388] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 517.388] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 517.388] (==) Log file: "/var/log/Xorg.2.log", Time: Tue Dec 31 14:11:44 2024
[ 517.388] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 517.388] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 517.388] (==) No Layout section. Using the first Screen section.
[ 517.388] (==) No screen section available. Using defaults.
[ 517.388] (**) |-->Screen "Default Screen Section" (0)
[ 517.388] (**) | |-->Monitor "<default monitor>"
[ 517.389] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 517.389] (**) Allowing byte-swapped clients
[ 517.389] (==) Automatically adding devices
[ 517.389] (==) Automatically enabling devices
[ 517.389] (==) Automatically adding GPU devices
[ 517.389] (==) Automatically binding GPU devices
[ 517.389] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 517.389] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 517.389] Entry deleted from font path.
[ 517.389] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 517.389] Entry deleted from font path.
[ 517.389] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 517.389] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 517.389] Entry deleted from font path.
[ 517.389] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 517.389] Entry deleted from font path.
[ 517.389] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 517.389] Entry deleted from font path.
[ 517.389] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 517.389] Entry deleted from font path.
[ 517.389] (==) FontPath set to:
[ 517.389] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 517.389] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 517.389] (II) Module ABI versions:
[ 517.389] X.Org ANSI C Emulation: 0.4
[ 517.389] X.Org Video Driver: 25.2
[ 517.389] X.Org XInput driver : 24.4
[ 517.389] X.Org Server Extension : 10.0
[ 517.389] (++) using VT number 3
[ 517.389] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 517.390] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 517.390] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 517.391] (--) PCI:*(0@0:2:0) 8086:7d55:17aa:3f96 rev 8, Mem @ 0x4818000000/16777216, 0x4000000000/268435456, BIOS @ 0x????????/131072
[ 517.391] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 517.391] (II) LoadModule: "glx"
[ 517.391] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 517.392] (II) Module glx: vendor="X.Org Foundation"
[ 517.392] compiled for 1.21.1.15, module version = 1.0.0
[ 517.392] ABI class: X.Org Server Extension, version 10.0
[ 517.392] (==) Matched intel as autoconfigured driver 0
[ 517.392] (==) Matched modesetting as autoconfigured driver 1
[ 517.392] (==) Matched fbdev as autoconfigured driver 2
[ 517.392] (==) Matched vesa as autoconfigured driver 3
[ 517.392] (==) Assigned the driver to the xf86ConfigLayout
[ 517.392] (II) LoadModule: "intel"
[ 517.392] (WW) Warning, couldn't open module intel
[ 517.392] (EE) Failed to load module "intel" (module does not exist, 0)
[ 517.392] (II) LoadModule: "modesetting"
[ 517.392] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 517.393] (II) Module modesetting: vendor="X.Org Foundation"
[ 517.393] compiled for 1.21.1.15, module version = 1.21.1
[ 517.393] Module class: X.Org Video Driver
[ 517.393] ABI class: X.Org Video Driver, version 25.2
[ 517.393] (II) LoadModule: "fbdev"
[ 517.393] (WW) Warning, couldn't open module fbdev
[ 517.393] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 517.393] (II) LoadModule: "vesa"
[ 517.393] (WW) Warning, couldn't open module vesa
[ 517.393] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 517.393] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 517.442] (II) modeset(0): using drv /dev/dri/card1
[ 517.442] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 517.442] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 517.442] (==) modeset(0): RGB weight 888
[ 517.442] (==) modeset(0): Default visual is TrueColor
[ 517.442] (II) Loading sub module "glamoregl"
[ 517.442] (II) LoadModule: "glamoregl"
[ 517.442] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 517.444] (II) Module glamoregl: vendor="X.Org Foundation"
[ 517.444] compiled for 1.21.1.15, module version = 1.0.1
[ 517.444] ABI class: X.Org ANSI C Emulation, version 0.4
[ 517.460] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Arc(tm) Graphics (MTL)
[ 517.460] (II) modeset(0): glamor initialized
[ 517.460] (==) modeset(0): VariableRefresh: disabled
[ 517.460] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 517.463] (II) modeset(0): Output eDP-1 has no monitor section
[ 517.473] (II) modeset(0): Output HDMI-1 has no monitor section
[ 517.473] (II) modeset(0): Output DP-1 has no monitor section
[ 517.474] (II) modeset(0): Output DP-2 has no monitor section
[ 517.474] (II) modeset(0): Output DP-3 has no monitor section
[ 517.474] (II) modeset(0): Output DP-4 has no monitor section
[ 517.475] (II) modeset(0): EDID for output eDP-1
[ 517.475] (II) modeset(0): Manufacturer: BOE Model: b76 Serial#: 0
[ 517.475] (II) modeset(0): Year: 2022 Week: 27
[ 517.475] (II) modeset(0): EDID Version: 1.4
[ 517.475] (II) modeset(0): Digital Display Input
[ 517.475] (II) modeset(0): 8 bits per channel
[ 517.475] (II) modeset(0): Digital interface is DisplayPort
[ 517.475] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 22
[ 517.475] (II) modeset(0): Gamma: 2.20
[ 517.475] (II) modeset(0): No DPMS capabilities specified
[ 517.475] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 517.475] (II) modeset(0): First detailed timing is preferred mode
[ 517.475] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 517.475] (II) modeset(0): Display is continuous-frequency
[ 517.475] (II) modeset(0): redX: 0.587 redY: 0.366 greenX: 0.356 greenY: 0.584
[ 517.475] (II) modeset(0): blueX: 0.168 blueY: 0.132 whiteX: 0.313 whiteY: 0.329
[ 517.475] (II) modeset(0): Manufacturer's mask: 0
[ 517.475] (II) modeset(0): Supported detailed timing:
[ 517.475] (II) modeset(0): clock: 168.2 MHz Image Size: 345 x 215 mm
[ 517.475] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2260 h_border: 0
[ 517.475] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1240 v_border: 0
[ 517.475] (II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 74 H max: 74 kHz, PixClock max 175 MHz
[ 517.475] (II) modeset(0): NV160WUM-N48
[ 517.475] (II) modeset(0): EDID (in hex):
[ 517.475] (II) modeset(0): 00ffffffffffff0009e5760b00000000
[ 517.475] (II) modeset(0): 1b200104a5221678037635965d5b952b
[ 517.475] (II) modeset(0): 21505400000001010101010101010101
[ 517.475] (II) modeset(0): 010101010101af41805471b028403020
[ 517.475] (II) modeset(0): 360059d71000001a0000000000000000
[ 517.476] (II) modeset(0): 00000000000000000000000000fd0028
[ 517.476] (II) modeset(0): 3c4a4a11010a202020202020000000fe
[ 517.476] (II) modeset(0): 004e5631363057554d2d4e34380a0050
[ 517.476] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Not using default mode "1600x900" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
[ 517.476] (II) modeset(0): Printing probed modes for output eDP-1
[ 517.476] (II) modeset(0): Modeline "1920x1200"x60.0 168.15 1920 1968 2000 2260 1200 1203 1209 1240 +hsync -vsync (74.4 kHz eP)
[ 517.476] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 517.476] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 517.476] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 517.476] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 517.476] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 517.476] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 517.476] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 517.476] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 517.476] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 517.476] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 517.476] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 517.476] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 517.476] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 517.476] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 517.483] (II) modeset(0): EDID for output HDMI-1
[ 517.483] (II) modeset(0): EDID for output DP-1
[ 517.483] (II) modeset(0): EDID for output DP-2
[ 517.483] (II) modeset(0): EDID for output DP-3
[ 517.483] (II) modeset(0): EDID for output DP-4
[ 517.483] (II) modeset(0): Output eDP-1 connected
[ 517.483] (II) modeset(0): Output HDMI-1 disconnected
[ 517.483] (II) modeset(0): Output DP-1 disconnected
[ 517.483] (II) modeset(0): Output DP-2 disconnected
[ 517.483] (II) modeset(0): Output DP-3 disconnected
[ 517.483] (II) modeset(0): Output DP-4 disconnected
[ 517.483] (II) modeset(0): Using exact sizes for initial modes
[ 517.483] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0
[ 517.483] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 517.483] (==) modeset(0): DPI set to (96, 96)
[ 517.483] (II) Loading sub module "fb"
[ 517.483] (II) LoadModule: "fb"
[ 517.483] (II) Module "fb" already built-in
[ 517.492] (==) modeset(0): Backing store enabled
[ 517.492] (==) modeset(0): Silken mouse enabled
[ 517.575] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 517.575] (==) modeset(0): DPMS enabled
[ 517.575] (II) modeset(0): [DRI2] Setup complete
[ 517.575] (II) modeset(0): [DRI2] DRI driver: iris
[ 517.575] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 517.575] (II) Initializing extension Generic Event Extension
[ 517.575] (II) Initializing extension SHAPE
[ 517.575] (II) Initializing extension MIT-SHM
[ 517.575] (II) Initializing extension XInputExtension
[ 517.575] (II) Initializing extension XTEST
[ 517.575] (II) Initializing extension BIG-REQUESTS
[ 517.575] (II) Initializing extension SYNC
[ 517.576] (II) Initializing extension XKEYBOARD
[ 517.576] (II) Initializing extension XC-MISC
[ 517.576] (II) Initializing extension SECURITY
[ 517.576] (II) Initializing extension XFIXES
[ 517.576] (II) Initializing extension RENDER
[ 517.576] (II) Initializing extension RANDR
[ 517.576] (II) Initializing extension COMPOSITE
[ 517.576] (II) Initializing extension DAMAGE
[ 517.576] (II) Initializing extension MIT-SCREEN-SAVER
[ 517.576] (II) Initializing extension DOUBLE-BUFFER
[ 517.577] (II) Initializing extension RECORD
[ 517.577] (II) Initializing extension DPMS
[ 517.577] (II) Initializing extension Present
[ 517.577] (II) Initializing extension DRI3
[ 517.577] (II) Initializing extension X-Resource
[ 517.577] (II) Initializing extension XVideo
[ 517.577] (II) Initializing extension XVideo-MotionCompensation
[ 517.577] (II) Initializing extension GLX
[ 517.582] (II) AIGLX: Loaded and initialized iris
[ 517.582] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 517.582] (II) Initializing extension XFree86-VidModeExtension
[ 517.582] (II) Initializing extension XFree86-DGA
[ 517.582] (II) Initializing extension XFree86-DRI
[ 517.582] (II) Initializing extension DRI2
[ 517.582] (II) modeset(0): Damage tracking initialized
[ 517.582] (II) modeset(0): Setting screen physical size to 508 x 317
[ 517.604] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 517.604] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 517.604] (**) Video Bus: Applying InputClass "system-keyboard"
[ 517.604] (II) LoadModule: "libinput"
[ 517.604] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 517.605] (II) Module libinput: vendor="X.Org Foundation"
[ 517.605] compiled for 1.21.1.13, module version = 1.5.0
[ 517.605] Module class: X.Org XInput Driver
[ 517.605] ABI class: X.Org XInput driver, version 24.4
[ 517.605] (II) Using input driver 'libinput' for 'Video Bus'
[ 517.605] (**) Video Bus: always reports core events
[ 517.605] (**) Option "Device" "/dev/input/event4"
[ 517.605] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 517.605] (II) event4 - Video Bus: device is a keyboard
[ 517.606] (II) event4 - Video Bus: device removed
[ 517.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 517.630] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 517.630] (**) Option "xkb_model" "pc105+inet"
[ 517.630] (**) Option "xkb_layout" "us"
[ 517.630] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 517.644] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 517.645] (II) event4 - Video Bus: device is a keyboard
[ 517.645] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 517.645] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 517.645] (**) Power Button: Applying InputClass "system-keyboard"
[ 517.645] (II) Using input driver 'libinput' for 'Power Button'
[ 517.645] (**) Power Button: always reports core events
[ 517.645] (**) Option "Device" "/dev/input/event0"
[ 517.645] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 517.645] (II) event0 - Power Button: device is a keyboard
[ 517.645] (II) event0 - Power Button: device removed
[ 517.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 517.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 517.670] (**) Option "xkb_model" "pc105+inet"
[ 517.670] (**) Option "xkb_layout" "us"
[ 517.670] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 517.671] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 517.671] (II) event0 - Power Button: device is a keyboard
[ 517.672] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 517.672] (II) No input driver specified, ignoring this device.
[ 517.672] (II) This device may have been added with another device file.
[ 517.672] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 517.672] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 517.672] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 517.672] (II) Using input driver 'libinput' for 'Sleep Button'
[ 517.672] (**) Sleep Button: always reports core events
[ 517.672] (**) Option "Device" "/dev/input/event2"
[ 517.673] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 517.673] (II) event2 - Sleep Button: device is a keyboard
[ 517.673] (II) event2 - Sleep Button: device removed
[ 517.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 517.717] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 517.717] (**) Option "xkb_model" "pc105+inet"
[ 517.717] (**) Option "xkb_layout" "us"
[ 517.717] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 517.717] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 517.718] (II) event2 - Sleep Button: device is a keyboard
[ 517.719] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event5)
[ 517.719] (**) USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 517.719] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[ 517.719] (**) USB OPTICAL MOUSE: always reports core events
[ 517.719] (**) Option "Device" "/dev/input/event5"
[ 517.720] (II) event5 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 517.720] (II) event5 - USB OPTICAL MOUSE: device is a pointer
[ 517.720] (II) event5 - USB OPTICAL MOUSE: device removed
[ 517.817] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.817] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.817] (II) libinput: USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.817] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0000:0538.0001/input/input5/event5"
[ 517.817] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 517.817] (**) Option "AccelerationScheme" "none"
[ 517.817] (**) USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 517.817] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 517.817] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 517.871] (II) event5 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 517.872] (II) event5 - USB OPTICAL MOUSE: device is a pointer
[ 517.872] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 517.872] (II) No input driver specified, ignoring this device.
[ 517.872] (II) This device may have been added with another device file.
[ 517.873] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Mouse (/dev/input/event10)
[ 517.873] (**) FTCS0038:00 2808:0106 Mouse: Applying InputClass "libinput pointer catchall"
[ 517.873] (II) Using input driver 'libinput' for 'FTCS0038:00 2808:0106 Mouse'
[ 517.873] (**) FTCS0038:00 2808:0106 Mouse: always reports core events
[ 517.873] (**) Option "Device" "/dev/input/event10"
[ 517.874] (II) event10 - FTCS0038:00 2808:0106 Mouse: is tagged by udev as: Mouse Pointingstick
[ 517.875] (II) event10 - FTCS0038:00 2808:0106 Mouse: device is a pointer
[ 517.875] (II) event10 - FTCS0038:00 2808:0106 Mouse: device removed
[ 517.943] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.943] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.943] (II) libinput: FTCS0038:00 2808:0106 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 517.943] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS0038:00/0018:2808:0106.0002/input/input13/event10"
[ 517.943] (II) XINPUT: Adding extended input device "FTCS0038:00 2808:0106 Mouse" (type: MOUSE, id 10)
[ 517.943] (**) Option "AccelerationScheme" "none"
[ 517.943] (**) FTCS0038:00 2808:0106 Mouse: (accel) selected scheme none/0
[ 517.943] (**) FTCS0038:00 2808:0106 Mouse: (accel) acceleration factor: 2.000
[ 517.943] (**) FTCS0038:00 2808:0106 Mouse: (accel) acceleration threshold: 4
[ 517.945] (II) event10 - FTCS0038:00 2808:0106 Mouse: is tagged by udev as: Mouse Pointingstick
[ 517.945] (II) event10 - FTCS0038:00 2808:0106 Mouse: device is a pointer
[ 517.946] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Mouse (/dev/input/mouse1)
[ 517.946] (II) No input driver specified, ignoring this device.
[ 517.946] (II) This device may have been added with another device file.
[ 517.947] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Touchpad (/dev/input/event11)
[ 517.947] (**) FTCS0038:00 2808:0106 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 517.947] (II) Using input driver 'libinput' for 'FTCS0038:00 2808:0106 Touchpad'
[ 517.947] (**) FTCS0038:00 2808:0106 Touchpad: always reports core events
[ 517.947] (**) Option "Device" "/dev/input/event11"
[ 517.947] (II) event11 - FTCS0038:00 2808:0106 Touchpad: is tagged by udev as: Touchpad
[ 517.948] (II) event11 - FTCS0038:00 2808:0106 Touchpad: device is a touchpad
[ 517.948] (II) event11 - FTCS0038:00 2808:0106 Touchpad: device removed
[ 518.017] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 518.017] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 518.017] (II) libinput: FTCS0038:00 2808:0106 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 518.017] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-FTCS0038:00/0018:2808:0106.0002/input/input14/event11"
[ 518.017] (II) XINPUT: Adding extended input device "FTCS0038:00 2808:0106 Touchpad" (type: TOUCHPAD, id 11)
[ 518.018] (**) Option "AccelerationScheme" "none"
[ 518.018] (**) FTCS0038:00 2808:0106 Touchpad: (accel) selected scheme none/0
[ 518.018] (**) FTCS0038:00 2808:0106 Touchpad: (accel) acceleration factor: 2.000
[ 518.018] (**) FTCS0038:00 2808:0106 Touchpad: (accel) acceleration threshold: 4
[ 518.018] (II) event11 - FTCS0038:00 2808:0106 Touchpad: is tagged by udev as: Touchpad
[ 518.019] (II) event11 - FTCS0038:00 2808:0106 Touchpad: device is a touchpad
[ 518.019] (II) config/udev: Adding input device FTCS0038:00 2808:0106 Touchpad (/dev/input/mouse2)
[ 518.019] (II) No input driver specified, ignoring this device.
[ 518.019] (II) This device may have been added with another device file.
[ 518.019] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 518.019] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 518.019] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 518.019] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 518.019] (**) Ideapad extra buttons: always reports core events
[ 518.019] (**) Option "Device" "/dev/input/event8"
[ 518.020] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 518.020] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 518.020] (II) event8 - Ideapad extra buttons: device removed
[ 518.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8/event8"
[ 518.080] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 518.080] (**) Option "xkb_model" "pc105+inet"
[ 518.080] (**) Option "xkb_layout" "us"
[ 518.080] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 518.081] (II) event8 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 518.081] (II) event8 - Ideapad extra buttons: device is a keyboard
[ 518.081] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event12)
[ 518.081] (II) No input driver specified, ignoring this device.
[ 518.081] (II) This device may have been added with another device file.
[ 518.081] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event13)
[ 518.081] (II) No input driver specified, ignoring this device.
[ 518.081] (II) This device may have been added with another device file.
[ 518.082] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event14)
[ 518.082] (II) No input driver specified, ignoring this device.
[ 518.082] (II) This device may have been added with another device file.
[ 518.082] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event15)
[ 518.082] (II) No input driver specified, ignoring this device.
[ 518.082] (II) This device may have been added with another device file.
[ 518.082] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event16)
[ 518.082] (II) No input driver specified, ignoring this device.
[ 518.082] (II) This device may have been added with another device file.
[ 518.082] (II) config/udev: Adding input device Intel HID events (/dev/input/event6)
[ 518.082] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 518.082] (**) Intel HID events: Applying InputClass "system-keyboard"
[ 518.082] (II) Using input driver 'libinput' for 'Intel HID events'
[ 518.082] (**) Intel HID events: always reports core events
[ 518.082] (**) Option "Device" "/dev/input/event6"
[ 518.083] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 518.083] (II) event6 - Intel HID events: device is a keyboard
[ 518.083] (II) event6 - Intel HID events: device removed
[ 518.117] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input6/event6"
[ 518.117] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 13)
[ 518.117] (**) Option "xkb_model" "pc105+inet"
[ 518.117] (**) Option "xkb_layout" "us"
[ 518.117] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 518.118] (II) event6 - Intel HID events: is tagged by udev as: Keyboard
[ 518.118] (II) event6 - Intel HID events: device is a keyboard
[ 518.119] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event7)
[ 518.119] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[ 518.119] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[ 518.119] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[ 518.119] (**) Intel HID 5 button array: always reports core events
[ 518.119] (**) Option "Device" "/dev/input/event7"
[ 518.119] (II) event7 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 518.119] (II) event7 - Intel HID 5 button array: device is a keyboard
[ 518.120] (II) event7 - Intel HID 5 button array: device removed
[ 518.167] (**) Option "config_info" "udev:/sys/devices/platform/INTC1077:00/input/input7/event7"
[ 518.167] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 14)
[ 518.167] (**) Option "xkb_model" "pc105+inet"
[ 518.167] (**) Option "xkb_layout" "us"
[ 518.167] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 518.168] (II) event7 - Intel HID 5 button array: is tagged by udev as: Keyboard
[ 518.168] (II) event7 - Intel HID 5 button array: device is a keyboard
[ 518.169] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 518.169] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 518.169] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 518.169] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 518.169] (**) AT Translated Set 2 keyboard: always reports core events
[ 518.169] (**) Option "Device" "/dev/input/event3"
[ 518.170] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 518.170] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 518.170] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 518.213] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 518.213] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 518.213] (**) Option "xkb_model" "pc105+inet"
[ 518.213] (**) Option "xkb_layout" "us"
[ 518.213] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 518.215] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 518.215] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 518.217] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 518.217] (II) No input driver specified, ignoring this device.
[ 518.217] (II) This device may have been added with another device file.
[ 522.125] (II) event4 - Video Bus: device removed
[ 522.206] (II) event0 - Power Button: device removed
[ 522.226] (II) event2 - Sleep Button: device removed
[ 522.256] (II) event5 - USB OPTICAL MOUSE: device removed
[ 522.310] (II) event10 - FTCS0038:00 2808:0106 Mouse: device removed
[ 522.363] (II) event11 - FTCS0038:00 2808:0106 Touchpad: device removed
[ 522.397] (II) event8 - Ideapad extra buttons: device removed
[ 522.430] (II) event6 - Intel HID events: device removed
[ 522.446] (II) event7 - Intel HID 5 button array: device removed
[ 522.463] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 522.480] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.126] (II) UnloadModule: "libinput"
[ 527.127] (II) UnloadModule: "libinput"
[ 527.128] (II) Server terminated successfully (0). Closing log file.xrandr --verbose :
Screen 0: minimum 16 x 16, current 1920 x 1200, maximum 32767 x 32767
eDP-1 connected primary 1920x1200+0+0 (0x23) normal (normal left inverted right x axis y axis) 345mm x 215mm
Identifier: 0x21
Timestamp: 622401
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 0.0
Clones:
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
RANDR Emulation: 1
non-desktop: 0
supported: 0, 1
1920x1200 (0x23) 193.250MHz -HSync +VSync *current +preferred
h: width 1920 start 2056 end 2256 total 2592 skew 0 clock 74.56KHz
v: height 1200 start 1203 end 1209 total 1245 clock 59.88Hz
1600x1200 (0x24) 161.000MHz -HSync +VSync
h: width 1600 start 1712 end 1880 total 2160 skew 0 clock 74.54KHz
v: height 1200 start 1203 end 1207 total 1245 clock 59.87Hz
1440x1080 (0x25) 129.000MHz -HSync +VSync
h: width 1440 start 1528 end 1680 total 1920 skew 0 clock 67.19KHz
v: height 1080 start 1083 end 1087 total 1120 clock 59.99Hz
1400x1050 (0x26) 121.750MHz -HSync +VSync
h: width 1400 start 1488 end 1632 total 1864 skew 0 clock 65.32KHz
v: height 1050 start 1053 end 1057 total 1089 clock 59.98Hz
1280x1024 (0x27) 109.000MHz -HSync +VSync
h: width 1280 start 1360 end 1496 total 1712 skew 0 clock 63.67KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.89Hz
1280x960 (0x28) 101.250MHz -HSync +VSync
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock 59.70KHz
v: height 960 start 963 end 967 total 996 clock 59.94Hz
1152x864 (0x29) 81.750MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.78KHz
v: height 864 start 867 end 871 total 897 clock 59.96Hz
1024x768 (0x2a) 63.500MHz -HSync +VSync
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.82KHz
v: height 768 start 771 end 775 total 798 clock 59.92Hz
800x600 (0x2b) 38.250MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.35KHz
v: height 600 start 603 end 607 total 624 clock 59.86Hz
640x480 (0x2c) 23.750MHz -HSync +VSync
h: width 640 start 656 end 720 total 800 skew 0 clock 29.69KHz
v: height 480 start 483 end 487 total 500 clock 59.38Hz
320x240 (0x2d) 6.000MHz -HSync +VSync
h: width 320 start 328 end 360 total 400 skew 0 clock 15.00KHz
v: height 240 start 243 end 247 total 253 clock 59.29Hz
1680x1050 (0x2e) 146.250MHz -HSync +VSync
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1440x900 (0x2f) 106.500MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.93KHz
v: height 900 start 903 end 909 total 934 clock 59.89Hz
1280x800 (0x30) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1152x720 (0x31) 66.750MHz -HSync +VSync
h: width 1152 start 1208 end 1320 total 1488 skew 0 clock 44.86KHz
v: height 720 start 723 end 729 total 748 clock 59.97Hz
960x600 (0x32) 45.250MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 37.21KHz
v: height 600 start 603 end 609 total 624 clock 59.63Hz
928x580 (0x33) 42.750MHz -HSync +VSync
h: width 928 start 968 end 1056 total 1184 skew 0 clock 36.11KHz
v: height 580 start 583 end 589 total 603 clock 59.88Hz
800x500 (0x34) 30.750MHz -HSync +VSync
h: width 800 start 824 end 896 total 992 skew 0 clock 31.00KHz
v: height 500 start 503 end 509 total 521 clock 59.50Hz
768x480 (0x35) 28.750MHz -HSync +VSync
h: width 768 start 792 end 864 total 960 skew 0 clock 29.95KHz
v: height 480 start 483 end 489 total 500 clock 59.90Hz
720x480 (0x36) 26.750MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 29.85KHz
v: height 480 start 483 end 493 total 500 clock 59.71Hz
640x400 (0x37) 20.000MHz -HSync +VSync
h: width 640 start 656 end 720 total 800 skew 0 clock 25.00KHz
v: height 400 start 403 end 409 total 417 clock 59.95Hz
320x200 (0x38) 5.000MHz -HSync +VSync
h: width 320 start 328 end 360 total 400 skew 0 clock 12.50KHz
v: height 200 start 203 end 209 total 215 clock 58.14Hz
1920x1080 (0x39) 173.000MHz -HSync +VSync
h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.16KHz
v: height 1080 start 1083 end 1088 total 1120 clock 59.96Hz
1600x900 (0x3a) 118.250MHz -HSync +VSync
h: width 1600 start 1688 end 1856 total 2112 skew 0 clock 55.99KHz
v: height 900 start 903 end 908 total 934 clock 59.95Hz
1368x768 (0x3b) 85.250MHz -HSync +VSync
h: width 1368 start 1440 end 1576 total 1784 skew 0 clock 47.79KHz
v: height 768 start 771 end 781 total 798 clock 59.88Hz
1280x720 (0x3c) 74.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 44.77KHz
v: height 720 start 723 end 728 total 748 clock 59.86Hz
1024x576 (0x3d) 46.500MHz -HSync +VSync
h: width 1024 start 1064 end 1160 total 1296 skew 0 clock 35.88KHz
v: height 576 start 579 end 584 total 599 clock 59.90Hz
864x486 (0x3e) 32.500MHz -HSync +VSync
h: width 864 start 888 end 968 total 1072 skew 0 clock 30.32KHz
v: height 486 start 489 end 494 total 506 clock 59.92Hz
720x400 (0x3f) 22.250MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 24.83KHz
v: height 400 start 403 end 413 total 419 clock 59.27Hz
640x350 (0x40) 17.500MHz -HSync +VSync
h: width 640 start 656 end 720 total 800 skew 0 clock 21.88KHz
v: height 350 start 353 end 363 total 369 clock 59.28HzLast edited by cuteorange (2025-01-01 09:31:18)
Offline
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr --verbose"
Can you elaborate on the "slight flicker"? Does it jerk between two frames, shutter (black, frame, black, frame, black, …) or do you get eg. stray artifact lines or blocks?
Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
I ran some tests to check for hardware acceleration.
I checked vainfo and the output was:
Trying display: wayland
vainfo: VA-API version: 1.22 (libva 2.22.0)
vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 24.4.4 ()
vainfo: Supported profile and entrypoints
VAProfileNone : VAEntrypointVideoProc
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileJPEGBaseline : VAEntrypointVLD
VAProfileJPEGBaseline : VAEntrypointEncPicture
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileVP8Version0_3 : VAEntrypointVLD
VAProfileHEVCMain : VAEntrypointVLD
VAProfileHEVCMain : VAEntrypointEncSlice
VAProfileHEVCMain10 : VAEntrypointVLD
VAProfileHEVCMain10 : VAEntrypointEncSlice
VAProfileVP9Profile0 : VAEntrypointVLD
VAProfileVP9Profile0 : VAEntrypointEncSlice
VAProfileVP9Profile1 : VAEntrypointVLD
VAProfileVP9Profile1 : VAEntrypointEncSlice
VAProfileVP9Profile2 : VAEntrypointVLD
VAProfileVP9Profile2 : VAEntrypointEncSlice
VAProfileVP9Profile3 : VAEntrypointVLD
VAProfileVP9Profile3 : VAEntrypointEncSlice
VAProfileHEVCMain12 : VAEntrypointVLD
VAProfileHEVCMain422_10 : VAEntrypointVLD
VAProfileHEVCMain422_12 : VAEntrypointVLD
VAProfileHEVCMain444 : VAEntrypointVLD
VAProfileHEVCMain444 : VAEntrypointEncSlice
VAProfileHEVCMain444_10 : VAEntrypointVLD
VAProfileHEVCMain444_10 : VAEntrypointEncSlice
VAProfileHEVCMain444_12 : VAEntrypointVLD
VAProfileHEVCSccMain : VAEntrypointVLD
VAProfileHEVCSccMain : VAEntrypointEncSlice
VAProfileHEVCSccMain10 : VAEntrypointVLD
VAProfileHEVCSccMain10 : VAEntrypointEncSlice
VAProfileHEVCSccMain444 : VAEntrypointVLD
VAProfileHEVCSccMain444 : VAEntrypointEncSlice
VAProfileAV1Profile0 : VAEntrypointVLD
VAProfileAV1Profile0 : VAEntrypointEncSlice
VAProfileHEVCSccMain444_10 : VAEntrypointVLD
VAProfileHEVCSccMain444_10 : VAEntrypointEncSliceIt seems that the accelerator is enabled. Now I tried to play a video with the accelerator using mpv, But it seems it can't be run with hardware acceleration:
[cplayer] Command line options: '--hwdec=vaapi' '-v' 'video.mkv'
[cplayer] mpv v0.39.0 Copyright © 2000-2024 mpv/MPlayer/mplayer2 projects
[cplayer] built on Nov 27 2024 18:31:26
[cplayer] libplacebo version: v7.349.0
[cplayer] FFmpeg version: n7.1
[cplayer] FFmpeg library versions:
[cplayer] libavcodec 61.19.100
[cplayer] libavdevice 61.3.100
[cplayer] libavfilter 10.4.100
[cplayer] libavformat 61.7.100
[cplayer] libavutil 59.39.100
[cplayer] libswresample 5.3.100
[cplayer] libswscale 8.3.100
[cplayer] Configuration: -Db_pie=true -Dpython.bytecompile=1 -Dlibmpv=true -Dgl-x11=enabled -Dcaca=disabled -Dcdda=enabled -Ddvbin=enabled -Ddvdnav=enabled -Dlibarchive=enabled -Dopenal=enabled -Dprefix=/usr -Dlibexecdir=lib -Dsbindir=bin -Dauto_features=auto -Dbuildtype=plain -Dwrap_mode=nodownload
[cplayer] List of enabled features: alsa build-date cdda cplugins cuda-hwaccel cuda-interop dmabuf-interop-gl dmabuf-wayland drm dvbin dvdnav egl egl-drm egl-wayland egl-x11 ffmpeg ffnvcodec gbm gl gl-x11 glibc-thread-name glob glob-posix gpl iconv jack javascript jpeg lcms2 libarchive libass libavdevice libbluray libdl libplacebo linux-fstatfs luajit memfd-create memrchr openal pipewire posix posix-shm ppoll pthread-condattr-setclock pulse rubberband rubberband-3 sixel uchardet vaapi vaapi-drm vaapi-wayland vaapi-x11 vapoursynth vdpau vdpau-gl-x11 vector vk-khr-display vt.h vulkan wayland wayland-protocols-1-32 x11 xv zimg zimg-st428 zlib
[cplayer] Reading config file /etc/mpv/encoding-profiles.conf
[ifo_dvdnav] Opening /etc/mpv/encoding-profiles.conf
[bdmv/bluray] Opening /etc/mpv/encoding-profiles.conf
[file] Opening /etc/mpv/encoding-profiles.conf
[cplayer] Applying profile 'default'...
[cplayer] Setting option 'hwdec' = 'vaapi' (flags = 8)
[cplayer] Setting option 'v' = '' (flags = 8)
[cplayer] Waiting for scripts...
[cplayer] Set property: user-data/osc/visibility="auto" -> 1
[cplayer] Set property: user-data/osc/margins={"b":0,"r":0,"l":0,"t":0} -> 1
[cplayer] Done loading scripts.
[cplayer] Running hook: auto_profiles/on_before_start_file
[cplayer] Set property: user-data/osc/margins={"b":0,"r":0,"l":0,"t":0} -> 1
[cplayer] Running hook: ytdl_hook/on_load
[cplayer] Running hook: ytdl_hook/on_load
[ytdl_hook] playlist hook
[cplayer] Running hook: auto_profiles/on_load
[cplayer] Set property: user-data/osc/margins={"b":0,"r":0,"l":0,"t":0} -> 1
[osd/libass] libass API version: 0x1703000
[osd/libass] libass source: commit: 0.17.3-0-ge46aedea0a0d17da4c4ef49d84b94a7994664ab5-dirty
[osd/libass] Shaper: FriBidi 1.0.15 (SIMPLE) HarfBuzz-ng 10.1.0 (COMPLEX)
[osd/libass] Setting up fonts...
[osd/libass] Using font provider fontconfig
[osd/libass] Done.
[ifo_dvdnav] Opening video.mkv
[bdmv/bluray] Opening video.mkv
[file] Opening video.mkv
[demux] Trying demuxers for level=normal.
[cplayer] Set property: user-data/osc/margins={"b":0,"r":0,"l":0,"t":0} -> 1
[mkv] Seeking to 655228707 to read header element 0x1c53bb6b.
[file] stream level seek from 131072 to 655228707
[mkv] Parsing cues...
[mkv] Seeking to 655261408 to read header element 0x1254c367.
[file] stream level seek from 655262388 to 35393
[mkv] All headers are parsed!
[demux] Detected file format: Matroska
[cplayer] Opening done: video.mkv
[find_files] Loading external files in .
[cplayer] Running hook: ytdl_hook/on_preloaded
[cplayer] Running hook: auto_profiles/on_preloaded
[mkv] select track 0
[mkv] select track 1
[mkv] select track 2
[cplayer] ● Video --vid=1 (hevc 1920x960 23.976 fps) [default]
[cplayer] ○ Image --vid=2 'cover.jpg' (mjpeg)
[cplayer] ● Audio --aid=1 --alang=ko 'https://pahe.li' (aac 6ch 48000 Hz)
[cplayer] ● Subs --sid=1 --slang=fa (subrip) [default]
[vo/gpu] Probing for best GPU context.
[vo/gpu/auto] Initializing GPU context 'auto'
[vo/gpu/opengl] Initializing GPU context 'wayland'
[vo/gpu/wayland] Registered interface wl_compositor at version 6
[vo/gpu/wayland] Registered interface zxdg_decoration_manager_v1 at version 1
[vo/gpu/wayland] Registered interface wp_viewporter at version 1
[vo/gpu/wayland] Registered interface wp_fractional_scale_manager_v1 at version 1
[vo/gpu/wayland] Registered interface wl_shm at version 1
[vo/gpu/wayland] Registered interface wl_seat at version 8
[vo/gpu/wayland] Registered interface wl_data_device_manager at version 3
[vo/gpu/wayland] Registered interface wp_cursor_shape_manager_v1 at version 1
[vo/gpu/wayland] Registered interface zwp_idle_inhibit_manager_v1 at version 1
[vo/gpu/wayland] Registered interface wl_subcompositor at version 1
[vo/gpu/wayland] Registered interface wp_content_type_manager_v1 at version 1
[vo/gpu/wayland] Registered interface wp_presentation at version 1
[vo/gpu/wayland] Registered interface xdg_wm_base at version 6
[vo/gpu/wayland] Registered interface zwp_linux_dmabuf_v1 at version 4
[vo/gpu/wayland] Registered interface wl_output at version 4
[vo/gpu/wayland] Compositor doesn't support the wp_single_pixel_buffer_manager_v1 protocol!
[vo/gpu/wayland] Registered output BOE eDP-1-0x0B76 (0x40):
[vo/gpu/wayland] x: 0px, y: 0px
[vo/gpu/wayland] w: 1920px (345mm), h: 1200px (215mm)
[vo/gpu/wayland] scale: 1.000000
[vo/gpu/wayland] Hz: 60.002000
[vo/gpu/wayland] Enabling server decorations
[vo/gpu/opengl] EGL_VERSION=1.5
[vo/gpu/opengl] EGL_VENDOR=Mesa Project
[vo/gpu/opengl] EGL_CLIENT_APIS=OpenGL OpenGL_ES
[vo/gpu/opengl] Trying to create Desktop OpenGL context.
[vo/gpu/wayland] GL_VERSION='4.6 (Core Profile) Mesa 24.3.2-arch1.1'
[vo/gpu/wayland] Detected desktop OpenGL 4.6.
[vo/gpu/wayland] GL_VENDOR='Intel'
[vo/gpu/wayland] GL_RENDERER='Mesa Intel(R) Arc(tm) Graphics (MTL)'
[vo/gpu/wayland] GL_SHADING_LANGUAGE_VERSION='4.60'
[vo/gpu/wayland] Loaded extension GL_KHR_debug.
[vo/gpu] Testing FBO format rgba16f
[vo/gpu] Using FBO format rgba16f.
[vo/gpu] Assuming 60.002000 FPS for display sync.
[vd] Container reported FPS: 23.976024
[vd] Codec list:
[vd] hevc - HEVC (High Efficiency Video Coding)
[vd] hevc_qsv (hevc) - HEVC video (Intel Quick Sync Video acceleration)
[vd] hevc_v4l2m2m (hevc) - V4L2 mem2mem HEVC decoder wrapper
[vd] hevc_cuvid (hevc) - Nvidia CUVID HEVC decoder
[vd] Opening decoder hevc
[vd] Looking at hwdec hevc-vaapi...
[vo/gpu] Loading hwdec drivers for format: 'vaapi'
[vo/gpu] Loading hwdec driver 'vaapi'
[vo/gpu/vaapi] Using EGL dmabuf interop via GL_EXT_EGL_image_storage
[vo/gpu/vaapi] Trying to open a x11 VA display...
[vo/gpu/vaapi] Trying to open a wayland VA display...
[vo/gpu/vaapi/vaapi] libva: VA-API version 1.22.0
[vo/gpu/vaapi/vaapi] libva: Trying to open /usr/lib/dri/iHD_drv_video.so
[vo/gpu/vaapi/vaapi] libva: Found init function __vaDriverInit_1_22
[vo/gpu/vaapi/vaapi] libva: va_openDriver() returns 0
[vo/gpu/vaapi/vaapi] Initialized VAAPI: version 1.22
[vo/gpu/vaapi] Going to probe surface formats (may log bogus errors)...
Job 1, 'mpv --hwdec=vaapi -v video.mkv' terminated by signal SIGSEGV (Address boundary error)I also manually set VLC to vaapi but in media information the decoded format field is empty.
Offline
When you close the player, you will also see these black shutters in the kde and sddm environment itself.
The output/config looks unspectacular (1200p60, one output, modesetting driver) and since it affects xe and i915 modules
Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
Offline
When you close the player, you will also see these black shutters in the kde and sddm environment itself.
The output/config looks unspectacular (1200p60, one output, modesetting driver) and since it affects xe and i915 modules
seth wrote:Does it help to ramp up the backlight to maximum (LED brightness control happens through - very rapid - shutter) and/or do you have an alternative output to test?
I always keep the screen brightness as high as possible. If I understand what you mean, unfortunately I don't have any other output display besides the internal display.
If I don't understand what you mean, please explain further. <3
Offline
No, the idea was to test whether the panel itself is to blame.
For a cross test, boot a different software stack (windows, some live distro like grml etc.) and see whether you get the same flicker there.
Offline
No, the idea was to test whether the panel itself is to blame.
For a cross test, boot a different software stack (windows, some live distro like grml etc.) and see whether you get the same flicker there.
I will install Windows and post the result here. It seems that now the flickers are not visible in the KDe or SDDM after changing SDDM from xorg to wayland, but they are visible in the videos. It seems that the problem is hardware acceleration. Also I could not play the video with mpv and hardware acceleration.
Thanks for your time.
Last edited by cuteorange (2025-01-01 17:29:28)
Offline
Job 1, 'mpv --hwdec=vaapi -v video.mkv' terminated by signal SIGSEGV (Address boundary error)Do you get a https://wiki.archlinux.org/title/Core_d … _core_dump for that?
Now the flickers are not visible in the user interface after switching from sddm to wayland but they are visible in videos.
Doesn't necessarily mean
to be a hardware acceleration problem
notably since you got the artifacts w/o video playback before.
Or is "now" "after switching from i915 to xe" and reliable/deterministic? Can you restore the status quo ante by switching to i915?
Might be a power state issue, what if you keep the CPU/IGP busy: https://wiki.archlinux.org/title/Intel_ … Intel_CPUs ?
Offline
Job 1, 'mpv --hwdec=vaapi -v video.mkv' terminated by signal SIGSEGV (Address boundary error)Do you get a https://wiki.archlinux.org/title/Core_d … _core_dump for that?
Now the flickers are not visible in the user interface after switching from sddm to wayland but they are visible in videos.
Doesn't necessarily mean
to be a hardware acceleration problem
notably since you got the artifacts w/o video playback before.
Or is "now" "after switching from i915 to xe" and reliable/deterministic? Can you restore the status quo ante by switching to i915?Might be a power state issue, what if you keep the CPU/IGP busy: https://wiki.archlinux.org/title/Intel_ … Intel_CPUs ?
I'm on Windows now. There is no problem playing the same videos. It seems that Intel still hasn't released hardware acceleration for the kernel. In kernel 6.13, it seems that the basics of the Xe3 architecture acceleration have been added.
I read on the Intel forum that someone was also having trouble using the accelerator with Core Ultra processors, and finally solved the problem by installing Intel's non-free firmware for Debian.
Last edited by cuteorange (2025-01-03 08:59:41)
Offline
https://gitlab.archlinux.org/archlinux/ … type=heads doesn't set "ENABLE_NONFREE_KERNELS=OFF" so that should™ be the non-free build?
Or did you also move to the 6.13/mainline kernel?
Offline
https://gitlab.archlinux.org/archlinux/ … type=heads doesn't set "ENABLE_NONFREE_KERNELS=OFF" so that should™ be the non-free build?
Or did you also move to the 6.13/mainline kernel?
I haven't tried kernel 6.13.
Offline
So what exactly did you do?
Install some firmware from debian on arch or on debian?
Which specifically and how?
Since the arch intel-media-driver shoudl™ include the non-free firmware, this sounds a lot like fluke/coincidence and we should verify that something actually changed at all and you're not just witnessing the power of cosmic rays or so…
Offline
So what exactly did you do?
Install some firmware from debian on arch or on debian?
Which specifically and how?Since the arch intel-media-driver shoudl™ include the non-free firmware, this sounds a lot like fluke/coincidence and we should verify that something actually changed at all and you're not just witnessing the power of cosmic rays or so…
I apologize for the brevity of my previous post. I switched back to Windows today and the problem was not there. I only saw those non-free firmwares in Debian on the Intel forum and then I found them in the non-free Debian repositories but I didn't try Debian itself because I didn't want to get involved with Debian backports. I use the same intel-media-driver in Arch and normally there shouldn't be any problem running mpv with the accelerator but I get an error. I checked the error with coredumpctl. It seems to be a stack error. (I didn't understand much about it). I don't know what the problem could be.
I am attaching the link to the discussion in question on the Intel forum.
https://community.intel.com/t5/Graphics … anguage=en
Offline
The firmware-intel-graphics listed there is covered by https://archlinux.org/packages/core/any/linux-firmware/ - do you lack that package?
Did you not encounter any file collisions when installing the debian package?
Offline
The firmware-intel-graphics listed there is covered by https://archlinux.org/packages/core/any/linux-firmware/ - do you lack that package?
Did you not encounter any file collisions when installing the debian package?
Hello again. I found the problem of the accelerator not running with mpv and it was related to the intel-media-driver which returns an unallocated address in arc gpu. Which is solved in intel-media-driver 25.1.0 (I got the build and installed it). But the flick problem does not seem to be from the accelerator. Because it has not been fixed. It does not seem to be a problem with the power settings. I think it is related to mesa or compositor kwin.
I also tested Fedora with KDE and the flicker was visible.
Let me be more specific, this flicker is very small and starts at the edges of the screen and usually reacts to bright spaces or bright spots. Something at the edges or anywhere on the screen.
And if it gets worse we will see it even sddm. This seems to be a problem with the mesa driver. I have not tested mesa 25 and I do not know for sure.
Last edited by cuteorange (2025-01-20 18:00:16)
Offline
Does the debian firmware package also help on fedora?
To be very specific: you installed firmware-intel-graphics_20230625-3~exp3_all.deb from http://http.us.debian.org/debian/pool/n … e-nonfree/ ?
Not just the latest FW from https://git.kernel.org/pub/scm/linux/ke … /tree/i915 ?
Didn't you run into file collisions?
Offline
I didn't install the Debian packages. The reason I didn't do that was because it didn't make sense to me because it includes the same things that are in linux-firmware. Also, that problem in the Debian forum was about the accelerator. I guessed that the flick could be from the accelerator, which it turns out wasn't. Because the accelerator not working was fixed with intel-media 25.1.0: https://aur.archlinux.org/packages/inte … driver-git. But the flick is still there. Since this flick also spreads to sddm, it's probably a problem with mesa.
Fedora had no saving grace because its packages were older than Arch and its configurations were the same as mine. Logically, this problem must also be in Fedora, which was
Last edited by cuteorange (2025-01-22 12:41:30)
Offline
Can you attach an external monitor and see whether the flicker exists there as well?
Offline