[SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

Seimu · 2025-02-24 17:38:26

Sorry for the late replay, I had to pause the investigation.

I don't know about the patch to be honest: I haven't find how to apply it and so I finally haven't tried it.
Howerver I tested with the new kernel version (6.13), a new HDMI cable, and by disabling my laptop screen: nothing worked.

I'm still stuck with it and I have no clue about what to look for. Excepted the patch that I don't know how to apply I don't know what I could try.

seth · 2025-02-24 21:22:57

https://gitlab.freedesktop.org/drm/i915 … te_2748479
https://aur.archlinux.org/packages/linux-drm-tip-git

Seimu · 2025-02-28 09:58:43

Thank you for your help !! This one did the job !

Just to avoid staying clueless: do you have any idea how this repository works ? Will the patch be released in the main kernel later on, or not at all ?

Anyway, thanks again for your patience and help on this. I'm really glad we finally got it working !

seth · 2025-02-28 14:12:27

The repo has the latest drm patches, if they don't cause regressions, they'll eventuall enter the mainline kernel (or hopefully be fixed and then enter the mainline kernel)
You can keep that kernel installed in parallel and every now and then check in w/ the main kernel from the repos to see whether the patch has entered it (ie. your HW works as in drm-tip)

Seimu · 2025-03-03 21:22:24

Ok well noted, thank you !

nomorewindows · 2025-03-04 17:29:21

I keep having a problem with my 4k monitor only wanting to run on 2k. It's a dell with one analog VGA port and two DisplayPorts. I use the DisplayPorts with a HDMI apater. I have been able to get both screens running at the same time with 4k on one and 1080p on the other, but not consistently.

Strangely, xrandr shows DP1,DP2, HDMI1, HDMI2. So I guess if I use DisplayPort on both ends, it would be using DP1 or DP2. But when I use the HDMI adapter, it shows HDMI1, or HDMI2 as connected.

I have gotten 4k, but intermittently, it wants to run at 2k. I usually run linux-rt, but when I switched to linux stock, all it would give me is unknown connector at 1024x768, I've tried switching ports and cables and adapters. Even only runs one screen while booting up before I even get to X. So I don't know if it's just because it's a dell that I'm having a problem or something is wonky in the kernel.

Last edited by nomorewindows (2025-03-04 17:31:50)

seth · 2025-03-04 21:40:47

The "unknown" monitor means you're running on the simpledrm device, a huge red flag in your descritption is "adapter", but to tell you anything more we'd need to see xorg log and ideally "xrandr --verbose"

Do you also have an intel Arc A580 chip?

nomorewindows · Today 06:52:00

seth wrote:

The "unknown" monitor means you're running on the simpledrm device, a huge red flag in your descritption is "adapter", but to tell you anything more we'd need to see xorg log and ideally "xrandr --verbose"
Do you also have an intel Arc A580 chip?

My /var/log/Xorg.0.log is old, so I have to peruse the one in ~/.local/share/xorg/Xorg.0.log

lspci says it is a intel xeon e3-1200. I guess that is for all onboard video outputs on a single chip? I don't think analog VGA goes up to 4k, but maybe someone else knows?

Xorg says it is HD 2500 intel graphics.

The modelines for 4k are in the xorg.log, but it says it's going to framebuffer to 2048x1152 instead of 3840x2160. And xrandr doesn't show the 4k modeline, only 2048x1152 as the highest, and I have to xrandr --ouput --mode in order to get it to do that because it selects a lower resolution than that.

I suspect that the DP<->HDMI conversion adapter probably doesn't help any. Plug it straight through HDMI on another computer and the screen works as expected.

And there are times when the screen just doesn't come back from sleeping. Have to reboot for whatever the reason is. I think it may have to do with the webbrowser (firefox or brave doesn't seem to matter), just hibernates and never wakes back up.

seth · Today 07:04:51

Xorg says it is HD 2500 intel graphics.

Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855

seth wrote:

we'd need to see xorg log and ideally "xrandr --verbose"

You can also test the drm-tip kernel, if it's the same problem, the same solution will apply.

nomorewindows · Today 17:18:22

seth wrote:

Xorg says it is HD 2500 intel graphics.
Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
seth wrote:
we'd need to see xorg log and ideally "xrandr --verbose"
You can also test the drm-tip kernel, if it's the same problem, the same solution will apply.

xrandr --verbose won't show all the modelines including the 4k. But here's a strange one, the resolution it picks is not even in the modelines, only in xrandr.
xrandr --verbose

Screen 0: minimum 8 x 8, current 2048 x 1152, maximum 32767 x 32767
DP1 disconnected primary (normal left inverted right x axis y axis)
	Identifier: 0x42
	Timestamp:  8524429
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
DP2 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x43
	Timestamp:  8524429
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	Colorspace: Default 
		supported: Default, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, RGB_WIDE_FIXED, RGB_WIDE_FLOAT, BT601_YCC
	max bpc: 12 
		range: (6, 12)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	subconnector: Unknown 
		supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
HDMI1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x44
	Timestamp:  8524429
	Subpixel:   unknown
	Clones:     VGA1
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
HDMI2 connected 2048x1152+0+0 (0x23a) normal (normal left inverted right x axis y axis) 300mm x 260mm
	Identifier: 0x45
	Timestamp:  8524429
	Subpixel:   unknown
	Gamma:      1.0:1.1:1.1
	Brightness: 1.0
	Clones:     VGA1
	CRTC:       0
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID: 
		00ffffffffffff006688601500000000
		0c1e0103801e1a783f6435a5544f9e27
		125054afcf00d1c0b300a9c095009040
		8180814081c040d000a0f0703e803020
		35002c041100001a000000fc00545948
		3135364b430a20202020000000ff000a
		202020202020202020202020000000fd
		001e3f0fde3c000a20202020202001ed
		02035cf15e04051013141f2021222748
		494a4b4c5d5e5f606162636465666768
		696a6be305c00023097f0783010000e5
		0f00000c006e030c0010003878200080
		0102030467d85dc401788801e6060501
		69694f681a00000101303fe698ad00a0
		f0703e80302035002c041100001e0000
		0000000000000000000000000000001f
	max bpc: 12 
		range: (8, 12)
	content type: No Data 
		supported: No Data, Graphics, Photo, Cinema, Game
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
  1856x1392 (0x238) 218.250MHz -HSync +VSync
        h: width  1856 start 1952 end 2176 total 2528 skew    0 clock  86.33KHz
        v: height 1392 start 1393 end 1396 total 1439           clock  60.00Hz
  1792x1344 (0x239) 204.750MHz -HSync +VSync
        h: width  1792 start 1920 end 2120 total 2448 skew    0 clock  83.64KHz
        v: height 1344 start 1345 end 1348 total 1394           clock  60.00Hz
  2048x1152 (0x23a) 162.000MHz +HSync +VSync *current
        h: width  2048 start 2074 end 2154 total 2250 skew    0 clock  72.00KHz
        v: height 1152 start 1153 end 1156 total 1200           clock  60.00Hz
  1920x1200 (0x23b) 154.000MHz +HSync -VSync
        h: width  1920 start 1968 end 2000 total 2080 skew    0 clock  74.04KHz
        v: height 1200 start 1203 end 1209 total 1235           clock  59.95Hz
  1920x1080 (0x23c) 148.500MHz -HSync -VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  1920x1080 (0x49) 148.500MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  1920x1080 (0x23d) 148.500MHz +HSync +VSync
        h: width  1920 start 2448 end 2492 total 2640 skew    0 clock  56.25KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  50.00Hz
  1920x1080 (0x225) 148.352MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.43KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  59.94Hz
  1920x1080i (0x23e) 74.250MHz +HSync +VSync Interlace
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.75KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  60.00Hz
  1920x1080i (0x23f) 74.250MHz +HSync +VSync Interlace
        h: width  1920 start 2448 end 2492 total 2640 skew    0 clock  28.12KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  50.00Hz
  1920x1080 (0x240) 74.250MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.75KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  30.00Hz
  1920x1080 (0x241) 74.250MHz +HSync +VSync
        h: width  1920 start 2448 end 2492 total 2640 skew    0 clock  28.12KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  25.00Hz
  1920x1080 (0x242) 74.250MHz +HSync +VSync
        h: width  1920 start 2558 end 2602 total 2750 skew    0 clock  27.00KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  24.00Hz
  1920x1080i (0x243) 74.176MHz +HSync +VSync Interlace
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.72KHz
        v: height 1080 start 1084 end 1094 total 1125           clock  59.94Hz
  1920x1080 (0x244) 74.176MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  33.72KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  29.97Hz
  1920x1080 (0x245) 74.176MHz +HSync +VSync
        h: width  1920 start 2558 end 2602 total 2750 skew    0 clock  26.97KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  23.98Hz
  1920x1080i (0x246) 72.000MHz +HSync -VSync Interlace
        h: width  1920 start 1952 end 2120 total 2304 skew    0 clock  31.25KHz
        v: height 1080 start 1126 end 1136 total 1250           clock  50.00Hz
  1600x1200 (0x226) 162.000MHz +HSync +VSync
        h: width  1600 start 1664 end 1856 total 2160 skew    0 clock  75.00KHz
        v: height 1200 start 1201 end 1204 total 1250           clock  60.00Hz
  1680x1050 (0x247) 119.000MHz +HSync -VSync
        h: width  1680 start 1728 end 1760 total 1840 skew    0 clock  64.67KHz
        v: height 1050 start 1053 end 1059 total 1080           clock  59.88Hz
  1680x945 (0x248) 131.481MHz -HSync +VSync
        h: width  1680 start 1784 end 1960 total 2240 skew    0 clock  58.70KHz
        v: height  945 start  946 end  949 total  978           clock  60.02Hz
  1400x1050 (0x249) 101.000MHz +HSync -VSync
        h: width  1400 start 1448 end 1480 total 1560 skew    0 clock  64.74KHz
        v: height 1050 start 1053 end 1057 total 1080           clock  59.95Hz
  1600x900 (0x24a) 108.000MHz +HSync +VSync
        h: width  1600 start 1624 end 1704 total 1800 skew    0 clock  60.00KHz
        v: height  900 start  901 end  904 total 1000           clock  60.00Hz
  1280x1024 (0x24b) 135.000MHz +HSync +VSync
        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock  79.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  75.02Hz
  1280x1024 (0x227) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1440x900 (0x24c) 88.750MHz +HSync -VSync
        h: width  1440 start 1488 end 1520 total 1600 skew    0 clock  55.47KHz
        v: height  900 start  903 end  909 total  926           clock  59.90Hz
  1280x960 (0x24d) 108.000MHz +HSync +VSync
        h: width  1280 start 1376 end 1488 total 1800 skew    0 clock  60.00KHz
        v: height  960 start  961 end  964 total 1000           clock  60.00Hz
  1366x768 (0x24e) 85.500MHz +HSync +VSync
        h: width  1366 start 1436 end 1579 total 1792 skew    0 clock  47.71KHz
        v: height  768 start  771 end  774 total  798           clock  59.79Hz
  1360x768 (0x24f) 85.500MHz +HSync +VSync
        h: width  1360 start 1424 end 1536 total 1792 skew    0 clock  47.71KHz
        v: height  768 start  771 end  777 total  795           clock  60.02Hz
  1280x800 (0x250) 71.000MHz +HSync -VSync
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  49.31KHz
        v: height  800 start  803 end  809 total  823           clock  59.91Hz
  1280x768 (0x251) 68.250MHz +HSync -VSync
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  47.40KHz
        v: height  768 start  771 end  778 total  790           clock  59.99Hz
  1280x720 (0x228) 74.250MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  45.00KHz
        v: height  720 start  725 end  730 total  750           clock  60.00Hz
  1280x720 (0x252) 74.250MHz +HSync +VSync
        h: width  1280 start 1720 end 1760 total 1980 skew    0 clock  37.50KHz
        v: height  720 start  725 end  730 total  750           clock  50.00Hz
  1280x720 (0x229) 74.176MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  44.96KHz
        v: height  720 start  725 end  730 total  750           clock  59.94Hz
  1024x768 (0x253) 78.750MHz +HSync +VSync
        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock  60.02KHz
        v: height  768 start  769 end  772 total  800           clock  75.03Hz
  1024x768 (0x254) 75.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock  56.48KHz
        v: height  768 start  771 end  777 total  806           clock  70.07Hz
  1024x768 (0x22a) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  1024x576 (0x255) 46.970MHz -HSync +VSync
        h: width  1024 start 1064 end 1168 total 1312 skew    0 clock  35.80KHz
        v: height  576 start  577 end  580 total  597           clock  59.97Hz
  800x600 (0x256) 50.000MHz +HSync +VSync
        h: width   800 start  856 end  976 total 1040 skew    0 clock  48.08KHz
        v: height  600 start  637 end  643 total  666           clock  72.19Hz
  800x600 (0x257) 49.500MHz +HSync +VSync
        h: width   800 start  816 end  896 total 1056 skew    0 clock  46.88KHz
        v: height  600 start  601 end  604 total  625           clock  75.00Hz
  800x600 (0x22b) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x258) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  848x480 (0x259) 33.750MHz +HSync +VSync
        h: width   848 start  864 end  976 total 1088 skew    0 clock  31.02KHz
        v: height  480 start  486 end  494 total  517           clock  60.00Hz
  640x480 (0x25a) 31.500MHz -HSync -VSync
        h: width   640 start  656 end  720 total  840 skew    0 clock  37.50KHz
        v: height  480 start  481 end  484 total  500           clock  75.00Hz
  640x480 (0x25b) 31.500MHz -HSync -VSync
        h: width   640 start  664 end  704 total  832 skew    0 clock  37.86KHz
        v: height  480 start  489 end  492 total  520           clock  72.81Hz
  640x480 (0x22e) 25.200MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.50KHz
        v: height  480 start  490 end  492 total  525           clock  60.00Hz
  640x480 (0x22f) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  720x400 (0x230) 28.320MHz -HSync +VSync
        h: width   720 start  738 end  846 total  900 skew    0 clock  31.47KHz
        v: height  400 start  412 end  414 total  449           clock  70.08Hz
VGA1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x46
	Timestamp:  8524429
	Subpixel:   unknown
	Clones:     HDMI1 HDMI2
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x47
	Timestamp:  8524429
	Subpixel:   no subpixels
	Clones:    
	CRTCs:      3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	non-desktop: 0 
		supported: 0, 1

Xorg.0.log

[    41.728] 
X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
[    41.728] Current Operating System: Linux archlinux 6.10.2-rt14-arch1-5-rt #1 SMP PREEMPT_RT Sat, 08 Feb 2025 13:50:34 +0000 x86_64
[    41.728] Kernel command line: \boot\vmlinuz-linux-rt root=/dev/sda8 rw initrd=boot\initramfs-linux-rt.img
[    41.728]  
[    41.728] Current version of pixman: 0.44.2
[    41.728] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    41.728] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    41.821] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    41.821] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    41.850] (==) No Layout section.  Using the first Screen section.
[    41.850] (==) No screen section available. Using defaults.
[    41.851] (**) |-->Screen "Default Screen Section" (0)
[    41.851] (**) |   |-->Monitor "<default monitor>"
[    41.851] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    41.851] (**) Allowing byte-swapped clients
[    41.851] (==) Automatically adding devices
[    41.851] (==) Automatically enabling devices
[    41.851] (==) Automatically adding GPU devices
[    41.851] (==) Automatically binding GPU devices
[    41.851] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    41.924] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    41.924] 	Entry deleted from font path.
[    41.940] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    41.940] (==) ModulePath set to "/usr/lib/xorg/modules"
[    41.940] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    41.940] (II) Module ABI versions:
[    41.940] 	X.Org ANSI C Emulation: 0.4
[    41.940] 	X.Org Video Driver: 25.2
[    41.940] 	X.Org XInput driver : 24.4
[    41.940] 	X.Org Server Extension : 10.0
[    41.940] (++) using VT number 1

[    41.941] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    41.942] (II) xfree86: Adding drm device (/dev/dri/card1)
[    41.942] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[    41.943] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[    41.945] (--) PCI:*(0@0:2:0) 8086:0152:1028:0577 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    41.945] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    41.945] (II) LoadModule: "glx"
[    41.958] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    42.089] (II) Module glx: vendor="X.Org Foundation"
[    42.089] 	compiled for 1.21.1.15, module version = 1.0.0
[    42.089] 	ABI class: X.Org Server Extension, version 10.0
[    42.089] (==) Matched intel as autoconfigured driver 0
[    42.089] (==) Matched modesetting as autoconfigured driver 1
[    42.089] (==) Matched fbdev as autoconfigured driver 2
[    42.089] (==) Matched vesa as autoconfigured driver 3
[    42.089] (==) Assigned the driver to the xf86ConfigLayout
[    42.089] (II) LoadModule: "intel"
[    42.089] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    42.154] (II) Module intel: vendor="X.Org Foundation"
[    42.154] 	compiled for 1.21.1.11, module version = 2.99.917
[    42.154] 	Module class: X.Org Video Driver
[    42.154] 	ABI class: X.Org Video Driver, version 25.2
[    42.154] (II) LoadModule: "modesetting"
[    42.154] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    42.193] (II) Module modesetting: vendor="X.Org Foundation"
[    42.193] 	compiled for 1.21.1.15, module version = 1.21.1
[    42.193] 	Module class: X.Org Video Driver
[    42.193] 	ABI class: X.Org Video Driver, version 25.2
[    42.193] (II) LoadModule: "fbdev"
[    42.193] (WW) Warning, couldn't open module fbdev
[    42.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    42.193] (II) LoadModule: "vesa"
[    42.193] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    42.209] (II) Module vesa: vendor="X.Org Foundation"
[    42.209] 	compiled for 1.21.1.11, module version = 2.6.0
[    42.209] 	Module class: X.Org Video Driver
[    42.209] 	ABI class: X.Org Video Driver, version 25.2
[    42.209] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    42.209] (II) intel: Driver for Intel(R) HD Graphics
[    42.209] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    42.209] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    42.209] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    42.209] (II) VESA: driver for VESA chipsets: vesa
[    42.209] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    42.220] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20230929
[    42.220] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[    42.224] (WW) Falling back to old probe method for modesetting
[    42.224] (EE) open /dev/dri/card0: No such file or directory
[    42.224] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    42.229] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[    42.229] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[    42.229] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    42.229] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    42.229] (==) intel(0): RGB weight 888
[    42.229] (==) intel(0): Default visual is TrueColor
[    42.245] (II) intel(0): Output VGA1 has no monitor section
[    42.245] (II) intel(0): Enabled output VGA1
[    42.245] (II) intel(0): Output HDMI1 has no monitor section
[    42.245] (II) intel(0): Enabled output HDMI1
[    42.245] (II) intel(0): Output DP1 has no monitor section
[    42.245] (II) intel(0): Enabled output DP1
[    42.245] (II) intel(0): Output HDMI2 has no monitor section
[    42.245] (II) intel(0): Enabled output HDMI2
[    42.245] (II) intel(0): Output DP2 has no monitor section
[    42.245] (II) intel(0): Enabled output DP2
[    42.245] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    42.246] (II) intel(0): Output VIRTUAL1 has no monitor section
[    42.246] (II) intel(0): Enabled output VIRTUAL1
[    42.246] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[    42.246] (==) intel(0): TearFree disabled
[    42.246] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    42.246] (==) intel(0): DPI set to (96, 96)
[    42.246] (II) Loading sub module "dri3"
[    42.246] (II) LoadModule: "dri3"
[    42.246] (II) Module "dri3" already built-in
[    42.246] (II) Loading sub module "dri2"
[    42.246] (II) LoadModule: "dri2"
[    42.246] (II) Module "dri2" already built-in
[    42.246] (II) Loading sub module "present"
[    42.246] (II) LoadModule: "present"
[    42.246] (II) Module "present" already built-in
[    42.246] (II) UnloadModule: "modesetting"
[    42.246] (II) Unloading modesetting
[    42.246] (II) UnloadModule: "vesa"
[    42.246] (II) Unloading vesa
[    42.284] (II) intel(0): SNA initialized with Ivybridge (gen7, gt1) backend
[    42.284] (==) intel(0): Backing store enabled
[    42.284] (==) intel(0): Silken mouse enabled
[    42.284] (II) intel(0): HW Cursor enabled
[    42.284] (==) intel(0): DPMS enabled
[    42.285] (==) intel(0): Display hotplug detection enabled
[    42.286] (II) intel(0): [DRI2] Setup complete
[    42.286] (II) intel(0): [DRI2]   DRI driver: i965
[    42.286] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    42.286] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    42.286] (II) intel(0): hardware support for Present enabled
[    42.286] (II) Initializing extension Generic Event Extension
[    42.286] (II) Initializing extension SHAPE
[    42.286] (II) Initializing extension MIT-SHM
[    42.286] (II) Initializing extension XInputExtension
[    42.287] (II) Initializing extension XTEST
[    42.287] (II) Initializing extension BIG-REQUESTS
[    42.287] (II) Initializing extension SYNC
[    42.287] (II) Initializing extension XKEYBOARD
[    42.288] (II) Initializing extension XC-MISC
[    42.288] (II) Initializing extension SECURITY
[    42.288] (II) Initializing extension XFIXES
[    42.288] (II) Initializing extension RENDER
[    42.288] (II) Initializing extension RANDR
[    42.289] (II) Initializing extension COMPOSITE
[    42.289] (II) Initializing extension DAMAGE
[    42.289] (II) Initializing extension MIT-SCREEN-SAVER
[    42.289] (II) Initializing extension DOUBLE-BUFFER
[    42.289] (II) Initializing extension RECORD
[    42.289] (II) Initializing extension DPMS
[    42.289] (II) Initializing extension Present
[    42.289] (II) Initializing extension DRI3
[    42.289] (II) Initializing extension X-Resource
[    42.289] (II) Initializing extension XVideo
[    42.289] (II) Initializing extension XVideo-MotionCompensation
[    42.289] (II) Initializing extension GLX
[    42.290] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[    42.290] (EE) AIGLX error: unable to load driver i965
[    45.439] (II) IGLX: Loaded and initialized swrast
[    45.439] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    45.439] (II) Initializing extension XFree86-VidModeExtension
[    45.439] (II) Initializing extension XFree86-DGA
[    45.439] (II) Initializing extension XFree86-DRI
[    45.439] (II) Initializing extension DRI2
[    45.514] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[    45.521] (II) intel(0): Setting screen physical size to 508 x 285
[    46.136] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    46.137] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.137] (**) Power Button: Applying InputClass "system-keyboard"
[    46.137] (II) LoadModule: "libinput"
[    46.137] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    46.190] (II) Module libinput: vendor="X.Org Foundation"
[    46.190] 	compiled for 1.21.1.13, module version = 1.5.0
[    46.190] 	Module class: X.Org XInput Driver
[    46.190] 	ABI class: X.Org XInput driver, version 24.4
[    46.190] (II) Using input driver 'libinput' for 'Power Button'
[    46.191] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[    46.191] (**) Power Button: always reports core events
[    46.191] (**) Option "Device" "/dev/input/event1"
[    46.311] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    46.311] (II) event1  - Power Button: device is a keyboard
[    46.311] (II) event1  - Power Button: device removed
[    46.311] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    46.311] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.311] (**) Option "xkb_model" "pc105"
[    46.311] (**) Option "xkb_layout" "us"
[    46.311] (**) Option "xkb_variant" "dvorak"
[    46.311] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.332] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    46.332] (II) event1  - Power Button: device is a keyboard
[    46.332] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    46.332] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.332] (**) Video Bus: Applying InputClass "system-keyboard"
[    46.332] (II) Using input driver 'libinput' for 'Video Bus'
[    46.334] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 25 paused 0
[    46.334] (**) Video Bus: always reports core events
[    46.334] (**) Option "Device" "/dev/input/event12"
[    46.335] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    46.335] (II) event12 - Video Bus: device is a keyboard
[    46.335] (II) event12 - Video Bus: device removed
[    46.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12"
[    46.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    46.335] (**) Option "xkb_model" "pc105"
[    46.335] (**) Option "xkb_layout" "us"
[    46.335] (**) Option "xkb_variant" "dvorak"
[    46.335] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.336] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    46.336] (II) event12 - Video Bus: device is a keyboard
[    46.336] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    46.337] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.337] (**) Power Button: Applying InputClass "system-keyboard"
[    46.337] (II) Using input driver 'libinput' for 'Power Button'
[    46.337] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 26 paused 0
[    46.337] (**) Power Button: always reports core events
[    46.337] (**) Option "Device" "/dev/input/event0"
[    46.338] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    46.338] (II) event0  - Power Button: device is a keyboard
[    46.338] (II) event0  - Power Button: device removed
[    46.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    46.338] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    46.338] (**) Option "xkb_model" "pc105"
[    46.338] (**) Option "xkb_layout" "us"
[    46.338] (**) Option "xkb_variant" "dvorak"
[    46.338] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.339] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    46.339] (II) event0  - Power Button: device is a keyboard
[    46.341] (II) config/udev: Adding input device CHICONY HP USB Multimedia Keyboard (/dev/input/event2)
[    46.341] (**) CHICONY HP USB Multimedia Keyboard: Applying InputClass "libinput keyboard catchall"
[    46.341] (**) CHICONY HP USB Multimedia Keyboard: Applying InputClass "system-keyboard"
[    46.341] (II) Using input driver 'libinput' for 'CHICONY HP USB Multimedia Keyboard'
[    46.341] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[    46.341] (**) CHICONY HP USB Multimedia Keyboard: always reports core events
[    46.341] (**) Option "Device" "/dev/input/event2"
[    46.344] (II) event2  - CHICONY HP USB Multimedia Keyboard: is tagged by udev as: Keyboard
[    46.344] (II) event2  - CHICONY HP USB Multimedia Keyboard: device is a keyboard
[    46.344] (II) event2  - CHICONY HP USB Multimedia Keyboard: device removed
[    46.344] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.0/0003:04F2:0841.0001/input/input2/event2"
[    46.344] (II) XINPUT: Adding extended input device "CHICONY HP USB Multimedia Keyboard" (type: KEYBOARD, id 9)
[    46.344] (**) Option "xkb_model" "pc105"
[    46.344] (**) Option "xkb_layout" "us"
[    46.344] (**) Option "xkb_variant" "dvorak"
[    46.344] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.346] (II) event2  - CHICONY HP USB Multimedia Keyboard: is tagged by udev as: Keyboard
[    46.346] (II) event2  - CHICONY HP USB Multimedia Keyboard: device is a keyboard
[    46.347] (II) config/udev: Adding input device CHICONY HP USB Multimedia Keyboard System Control (/dev/input/event3)
[    46.347] (**) CHICONY HP USB Multimedia Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    46.347] (**) CHICONY HP USB Multimedia Keyboard System Control: Applying InputClass "system-keyboard"
[    46.347] (II) Using input driver 'libinput' for 'CHICONY HP USB Multimedia Keyboard System Control'
[    46.348] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[    46.348] (**) CHICONY HP USB Multimedia Keyboard System Control: always reports core events
[    46.348] (**) Option "Device" "/dev/input/event3"
[    46.350] (II) event3  - CHICONY HP USB Multimedia Keyboard System Control: is tagged by udev as: Keyboard
[    46.350] (II) event3  - CHICONY HP USB Multimedia Keyboard System Control: device is a keyboard
[    46.350] (II) event3  - CHICONY HP USB Multimedia Keyboard System Control: device removed
[    46.350] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:04F2:0841.0002/input/input3/event3"
[    46.350] (II) XINPUT: Adding extended input device "CHICONY HP USB Multimedia Keyboard System Control" (type: KEYBOARD, id 10)
[    46.350] (**) Option "xkb_model" "pc105"
[    46.350] (**) Option "xkb_layout" "us"
[    46.350] (**) Option "xkb_variant" "dvorak"
[    46.350] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.352] (II) event3  - CHICONY HP USB Multimedia Keyboard System Control: is tagged by udev as: Keyboard
[    46.352] (II) event3  - CHICONY HP USB Multimedia Keyboard System Control: device is a keyboard
[    46.353] (II) config/udev: Adding input device CHICONY HP USB Multimedia Keyboard Consumer Control (/dev/input/event4)
[    46.353] (**) CHICONY HP USB Multimedia Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.353] (**) CHICONY HP USB Multimedia Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    46.353] (II) Using input driver 'libinput' for 'CHICONY HP USB Multimedia Keyboard Consumer Control'
[    46.354] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[    46.354] (**) CHICONY HP USB Multimedia Keyboard Consumer Control: always reports core events
[    46.354] (**) Option "Device" "/dev/input/event4"
[    46.356] (II) event4  - CHICONY HP USB Multimedia Keyboard Consumer Control: is tagged by udev as: Keyboard
[    46.356] (II) event4  - CHICONY HP USB Multimedia Keyboard Consumer Control: device is a keyboard
[    46.356] (II) event4  - CHICONY HP USB Multimedia Keyboard Consumer Control: device removed
[    46.356] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.2/3-2.3.2:1.1/0003:04F2:0841.0002/input/input4/event4"
[    46.356] (II) XINPUT: Adding extended input device "CHICONY HP USB Multimedia Keyboard Consumer Control" (type: KEYBOARD, id 11)
[    46.356] (**) Option "xkb_model" "pc105"
[    46.356] (**) Option "xkb_layout" "us"
[    46.356] (**) Option "xkb_variant" "dvorak"
[    46.356] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.358] (II) event4  - CHICONY HP USB Multimedia Keyboard Consumer Control: is tagged by udev as: Keyboard
[    46.358] (II) event4  - CHICONY HP USB Multimedia Keyboard Consumer Control: device is a keyboard
[    46.359] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event10)
[    46.359] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    46.359] (II) Using input driver 'libinput' for 'PixArt Dell MS116 USB Optical Mouse'
[    46.360] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 30 paused 0
[    46.360] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events
[    46.360] (**) Option "Device" "/dev/input/event10"
[    46.361] (II) event10 - PixArt Dell MS116 USB Optical Mouse: is tagged by udev as: Mouse
[    46.361] (II) event10 - PixArt Dell MS116 USB Optical Mouse: device set to 1000 DPI
[    46.362] (II) event10 - PixArt Dell MS116 USB Optical Mouse: device is a pointer
[    46.362] (II) event10 - PixArt Dell MS116 USB Optical Mouse: device removed
[    46.362] (II) libinput: PixArt Dell MS116 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.362] (II) libinput: PixArt Dell MS116 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.362] (II) libinput: PixArt Dell MS116 USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.362] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3.4/3-2.3.4:1.0/0003:413C:301A.0005/input/input12/event10"
[    46.362] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12)
[    46.362] (**) Option "AccelerationScheme" "none"
[    46.362] (**) PixArt Dell MS116 USB Optical Mouse: (accel) selected scheme none/0
[    46.362] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000
[    46.362] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4
[    46.364] (II) event10 - PixArt Dell MS116 USB Optical Mouse: is tagged by udev as: Mouse
[    46.364] (II) event10 - PixArt Dell MS116 USB Optical Mouse: device set to 1000 DPI
[    46.364] (II) event10 - PixArt Dell MS116 USB Optical Mouse: device is a pointer
[    46.365] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse1)
[    46.365] (II) No input driver specified, ignoring this device.
[    46.365] (II) This device may have been added with another device file.
[    46.366] (II) config/udev: Adding input device CX 2.4G Receiver (/dev/input/event5)
[    46.366] (**) CX 2.4G Receiver: Applying InputClass "libinput keyboard catchall"
[    46.366] (**) CX 2.4G Receiver: Applying InputClass "system-keyboard"
[    46.366] (II) Using input driver 'libinput' for 'CX 2.4G Receiver'
[    46.366] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
[    46.366] (**) CX 2.4G Receiver: always reports core events
[    46.366] (**) Option "Device" "/dev/input/event5"
[    46.368] (II) event5  - CX 2.4G Receiver: is tagged by udev as: Keyboard
[    46.368] (II) event5  - CX 2.4G Receiver: device is a keyboard
[    46.368] (II) event5  - CX 2.4G Receiver: device removed
[    46.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.0/0003:3554:FC03.0003/input/input6/event5"
[    46.368] (II) XINPUT: Adding extended input device "CX 2.4G Receiver" (type: KEYBOARD, id 13)
[    46.368] (**) Option "xkb_model" "pc105"
[    46.368] (**) Option "xkb_layout" "us"
[    46.368] (**) Option "xkb_variant" "dvorak"
[    46.368] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.370] (II) event5  - CX 2.4G Receiver: is tagged by udev as: Keyboard
[    46.370] (II) event5  - CX 2.4G Receiver: device is a keyboard
[    46.371] (II) config/udev: Adding input device CX 2.4G Receiver System Control (/dev/input/event9)
[    46.371] (**) CX 2.4G Receiver System Control: Applying InputClass "libinput keyboard catchall"
[    46.371] (**) CX 2.4G Receiver System Control: Applying InputClass "system-keyboard"
[    46.371] (II) Using input driver 'libinput' for 'CX 2.4G Receiver System Control'
[    46.372] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 32 paused 0
[    46.372] (**) CX 2.4G Receiver System Control: always reports core events
[    46.372] (**) Option "Device" "/dev/input/event9"
[    46.374] (II) event9  - CX 2.4G Receiver System Control: is tagged by udev as: Keyboard
[    46.374] (II) event9  - CX 2.4G Receiver System Control: device is a keyboard
[    46.374] (II) event9  - CX 2.4G Receiver System Control: device removed
[    46.374] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.1/0003:3554:FC03.0004/input/input10/event9"
[    46.374] (II) XINPUT: Adding extended input device "CX 2.4G Receiver System Control" (type: KEYBOARD, id 14)
[    46.374] (**) Option "xkb_model" "pc105"
[    46.374] (**) Option "xkb_layout" "us"
[    46.374] (**) Option "xkb_variant" "dvorak"
[    46.374] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    46.376] (II) event9  - CX 2.4G Receiver System Control: is tagged by udev as: Keyboard
[    46.376] (II) event9  - CX 2.4G Receiver System Control: device is a keyboard
[    46.377] (II) config/udev: Adding input device CX 2.4G Receiver Mouse (/dev/input/event6)
[    46.377] (**) CX 2.4G Receiver Mouse: Applying InputClass "libinput pointer catchall"
[    46.377] (II) Using input driver 'libinput' for 'CX 2.4G Receiver Mouse'
[    46.378] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 33 paused 0
[    46.378] (**) CX 2.4G Receiver Mouse: always reports core events
[    46.378] (**) Option "Device" "/dev/input/event6"
[    46.380] (II) event6  - CX 2.4G Receiver Mouse: is tagged by udev as: Mouse
[    46.380] (II) event6  - CX 2.4G Receiver Mouse: device is a pointer
[    46.380] (II) event6  - CX 2.4G Receiver Mouse: device removed
[    46.380] (II) libinput: CX 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.380] (II) libinput: CX 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.380] (II) libinput: CX 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    46.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.1/0003:3554:FC03.0004/input/input7/event6"
[    46.380] (II) XINPUT: Adding extended input device "CX 2.4G Receiver Mouse" (type: MOUSE, id 15)
[    46.380] (**) Option "AccelerationScheme" "none"
[    46.380] (**) CX 2.4G Receiver Mouse: (accel) selected scheme none/0
[    46.380] (**) CX 2.4G Receiver Mouse: (accel) acceleration factor: 2.000
[    46.380] (**) CX 2.4G Receiver Mouse: (accel) acceleration threshold: 4
[    46.382] (II) event6  - CX 2.4G Receiver Mouse: is tagged by udev as: Mouse
[    46.382] (II) event6  - CX 2.4G Receiver Mouse: device is a pointer
[    46.383] (II) config/udev: Adding input device CX 2.4G Receiver Mouse (/dev/input/mouse0)
[    46.383] (II) No input driver specified, ignoring this device.
[    46.383] (II) This device may have been added with another device file.
[    46.384] (II) config/udev: Adding input device CX 2.4G Receiver (/dev/input/event7)
[    46.384] (II) No input driver specified, ignoring this device.
[    46.384] (II) This device may have been added with another device file.
[    46.385] (II) config/udev: Adding input device CX 2.4G Receiver Consumer Control (/dev/input/event8)
[    46.385] (**) CX 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.385] (**) CX 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard"
[    46.385] (II) Using input driver 'libinput' for 'CX 2.4G Receiver Consumer Control'
[    46.386] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0
[    46.386] (**) CX 2.4G Receiver Consumer Control: always reports core events
[    46.386] (**) Option "Device" "/dev/input/event8"
[    46.387] (II) event8  - CX 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[    46.387] (II) event8  - CX 2.4G Receiver Consumer Control: device is a keyboard
[    46.388] (II) event8  - CX 2.4G Receiver Consumer Control: device removed
[    46.388] (II) libinput: CX 2.4G Receiver Consumer Control: needs a virtual subdevice
[    46.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.1/0003:3554:FC03.0004/input/input9/event8"
[    46.388] (II) XINPUT: Adding extended input device "CX 2.4G Receiver Consumer Control" (type: MOUSE, id 16)
[    46.388] (**) Option "AccelerationScheme" "none"
[    46.388] (**) CX 2.4G Receiver Consumer Control: (accel) selected scheme none/0
[    46.388] (**) CX 2.4G Receiver Consumer Control: (accel) acceleration factor: 2.000
[    46.388] (**) CX 2.4G Receiver Consumer Control: (accel) acceleration threshold: 4
[    46.389] (II) event8  - CX 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[    46.389] (II) event8  - CX 2.4G Receiver Consumer Control: device is a keyboard
[    46.390] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[    46.390] (II) No input driver specified, ignoring this device.
[    46.390] (II) This device may have been added with another device file.
[    46.390] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[    46.390] (II) No input driver specified, ignoring this device.
[    46.390] (II) This device may have been added with another device file.
[    46.391] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event15)
[    46.391] (II) No input driver specified, ignoring this device.
[    46.391] (II) This device may have been added with another device file.
[    46.391] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[    46.391] (II) No input driver specified, ignoring this device.
[    46.391] (II) This device may have been added with another device file.
[    46.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[    46.391] (II) No input driver specified, ignoring this device.
[    46.391] (II) This device may have been added with another device file.
[    46.392] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[    46.392] (II) No input driver specified, ignoring this device.
[    46.392] (II) This device may have been added with another device file.
[    46.392] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    46.392] (II) No input driver specified, ignoring this device.
[    46.392] (II) This device may have been added with another device file.
[    46.404] (**) CX 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.404] (**) CX 2.4G Receiver Consumer Control: Applying InputClass "system-keyboard"
[    46.404] (II) Using input driver 'libinput' for 'CX 2.4G Receiver Consumer Control'
[    46.404] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72
[    46.404] (**) CX 2.4G Receiver Consumer Control: always reports core events
[    46.404] (**) Option "Device" "/dev/input/event8"
[    46.404] (II) libinput: CX 2.4G Receiver Consumer Control: is a virtual subdevice
[    46.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.4/3-2.4.4:1.1/0003:3554:FC03.0004/input/input9/event8"
[    46.404] (II) XINPUT: Adding extended input device "CX 2.4G Receiver Consumer Control" (type: KEYBOARD, id 17)
[    46.404] (**) Option "xkb_model" "pc105"
[    46.404] (**) Option "xkb_layout" "us"
[    46.404] (**) Option "xkb_variant" "dvorak"
[    46.404] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    80.405] (II) intel(0): EDID vendor "YTH", prod id 5472
[    80.405] (II) intel(0): Using EDID range info for horizontal sync
[    80.405] (II) intel(0): Using EDID range info for vertical refresh
[    80.405] (II) intel(0): Printing DDC gathered Modelines:
[    80.405] (II) intel(0): Modeline "3840x2160"x0.0  533.12  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    80.405] (II) intel(0): Modeline "3840x2160"x0.0  444.40  3840 3888 3920 4000  2160 2163 2168 2222 +hsync +vsync (111.1 kHz e)
[    80.405] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    80.405] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    80.405] (II) intel(0): Modeline "1920x1080i"x0.0   72.00  1920 1952 2120 2304  1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
[    80.405] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    80.405] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    80.405] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    80.405] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    80.405] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    80.405] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    80.405] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    80.405] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    80.405] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    80.405] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    80.405] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    80.405] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    80.405] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    80.405] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    80.405] (II) intel(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    80.405] (II) intel(0): Modeline "1400x1050"x0.0  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    80.405] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    80.405] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    80.405] (--) intel(0): HDMI max TMDS frequency 600000KHz
[    95.823] (--) intel(0): HDMI max TMDS frequency 600000KHz
[  8524.422] (II) intel(0): resizing framebuffer to 2048x1152
[  8524.429] (II) intel(0): switch to mode 2048x1152@60.0 on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 99743.495] (EE) client bug: timer event6 debounce: scheduled expiry is in the past (-40ms), your system is too slow
[136294.951] (--) intel(0): HDMI max TMDS frequency 600000KHz
[174428.641] (--) intel(0): HDMI max TMDS frequency 600000KHz

seth · Today 21:50:04

[    45.439] (II) GLX: Initialized DRISWRAST GL provider for screen 0

Start by removing xf86-video-intel.
If you for some reason want to keep using it, at least use the proper DRI, https://wiki.archlinux.org/title/Intel_ … ecent_GPUs

The output runs at 53% of the (only) advertised 3840x2160 - do you somehow scale the output?

Arch Linux

#26 2025-02-24 17:38:26

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#27 2025-02-24 21:22:57

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#28 2025-02-28 09:58:43

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#29 2025-02-28 14:12:27

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#30 2025-03-03 21:22:24

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#31 2025-03-04 17:29:21

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#32 2025-03-04 21:40:47

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#33 Today 06:52:00

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#34 Today 07:04:51

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#35 Today 17:18:22

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

#36 Today 21:50:04

Re: [SOLVED] Issue with 4k monitor and Intel Arch - 5120x1440 refused

Board footer