You are not logged in.

Pages: 1

#1 Yesterday 03:25:22

imyavetra
Member
Registered: 2022-06-01
Posts: 5

Cannot change 24" Apple Cinema Display brightness after 7.0.14

Hi,

After upgrading yesterday from 7.0.10.arch1-1 -> 7.0.14.arch1-1, my (old) Apple Cinema display no longer shows up under /dev/usb/. Since Apple used their own protocol, I normally point `acdcontrol` at the Apple display in /dev/usb/hiddev1.

Here's the output of `udevadm monitor` when plugging the display's USB connector in:

7.0.10:

KERNEL[513.218664] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
KERNEL[513.286590] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
KERNEL[513.289803] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009 (hid)
KERNEL[513.290051] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/usbmisc/hiddev1 (usbmisc)
KERNEL[513.290259] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009/hidraw/hidraw2 (hidraw)
KERNEL[513.290450] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009 (hid)
KERNEL[513.290640] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
KERNEL[513.290827] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
UDEV  [513.302166] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
UDEV  [513.307498] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
UDEV  [513.310573] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/usbmisc/hiddev1 (usbmisc)
UDEV  [513.311992] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009 (hid)
UDEV  [513.328413] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009/hidraw/hidraw2 (hidraw)
UDEV  [513.332559] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0009 (hid)
UDEV  [513.337165] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)

(complete udev log)

7.0.14:

KERNEL[1724.840544] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
KERNEL[1724.908472] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
KERNEL[1724.941612] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0017 (hid)
KERNEL[1724.941861] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
KERNEL[1724.942095] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
UDEV  [1724.953458] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)
UDEV  [1724.958389] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
UDEV  [1724.962560] add      /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/0003:05AC:9236.0017 (hid)
UDEV  [1724.967223] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0 (usb)
UDEV  [1724.977987] bind     /devices/pci0000:00/0000:00:08.1/0000:c1:00.3/usb1/1-2/1-2.4/1-2.4.3 (usb)

(complete udev log)

dmesg, 7.0.10

[  961.497813] usb 1-2.4.3: new full-speed USB device number 20 using xhci_hcd
[  961.600992] usb 1-2.4.3: New USB device found, idVendor=05ac, idProduct=9236, bcdDevice= 2.49
[  961.601006] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  961.601012] usb 1-2.4.3: Product: Apple LED Cinema Display
[  961.601017] usb 1-2.4.3: Manufacturer: Apple Inc.
[  961.695228] hid-generic 0003:05AC:9236.000C: hiddev97,hidraw2: USB HID v1.11 Device [Apple Inc. Apple LED Cinema Display] on usb-0000:c1:00.3-2.4.3/input0

dmesg, 7.0.14:

[91551.705917] usb 1-2.4.3: new full-speed USB device number 14 using xhci_hcd
[91551.833596] usb 1-2.4.3: New USB device found, idVendor=05ac, idProduct=9236, bcdDevice= 2.49
[91551.833612] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[91551.833617] usb 1-2.4.3: Product: Apple LED Cinema Display

I'm asking here because I don't know where to go next in troubleshooting. I see that both kernel versions add 0003:05AC:9236.0009 (hid), but only 7.0.10 adds usbmisc/hiddev1 (usbmisc).

Thanks in advance for any help or pointers in the right direction.

Last edited by imyavetra (Yesterday 03:54:39)

Offline

#2 Yesterday 15:09:37

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,430

Re: Cannot change 24" Apple Cinema Display brightness after 7.0.14

7.0.14 lacks the "Manufacturer" line??
There's probably some error around it?


Compare the system journals where you get to see kernel and udev interleaved.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

Pages: 1

Board footer

Powered by FluxBB